| blob | f18f4fc3a8668701b82dc43b5644aa4b6c3ff9da |
1 [ 0.000000] Linux version 2.6.29-tuxonice-r3-s4 (portage@savara) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #5 SMP Thu Jul 2 13:29:19 CEST 2009
2 [ 0.000000] Command line: root=/dev/sda2 ro
3 [ 0.000000] KERNEL supported cpus:
4 [ 0.000000] AMD AuthenticAMD
5 [ 0.000000] BIOS-provided physical RAM map:
6 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
7 [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
8 [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
9 [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable)
10 [ 0.000000] BIOS-e820: 00000000bffd0000 - 00000000bffde000 (ACPI data)
11 [ 0.000000] BIOS-e820: 00000000bffde000 - 00000000c0000000 (ACPI NVS)
12 [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
13 [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
14 [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
15 [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
16 [ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
17 [ 0.000000] DMI present.
18 [ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x100000000
19 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
20 [ 0.000000] last_pfn = 0xbffd0 max_arch_pfn = 0x100000000
21 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffd0000
22 [ 0.000000] 0000000000 - 00bfe00000 page 2M
23 [ 0.000000] 00bfe00000 - 00bffd0000 page 4k
24 [ 0.000000] kernel direct mapping tables up to bffd0000 @ 8000-d000
25 [ 0.000000] last_map_addr: bffd0000 end: bffd0000
26 [ 0.000000] init_memory_mapping: 0000000100000000-00000001c0000000
27 [ 0.000000] 0100000000 - 01c0000000 page 2M
28 [ 0.000000] kernel direct mapping tables up to 1c0000000 @ b000-13000
29 [ 0.000000] last_map_addr: 1c0000000 end: 1c0000000
30 [ 0.000000] ACPI: RSDP 000F9100, 0014 (r0 ACPIAM)
31 [ 0.000000] ACPI: RSDT BFFD0000, 003C (r1 A M I OEMRSDT 5000717 MSFT 97)
32 [ 0.000000] ACPI: FACP BFFD0200, 0084 (r2 A M I OEMFACP 5000717 MSFT 97)
33 [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
34 [ 0.000000] ACPI: DSDT BFFD0440, 5035 (r1 1ADGH 1ADGH013 13 INTL 20051117)
35 [ 0.000000] ACPI: FACS BFFDE000, 0040
36 [ 0.000000] ACPI: APIC BFFD0390, 0070 (r1 A M I OEMAPIC 5000717 MSFT 97)
37 [ 0.000000] ACPI: MCFG BFFD0400, 003C (r1 A M I OEMMCFG 5000717 MSFT 97)
38 [ 0.000000] ACPI: OEMB BFFDE040, 0061 (r1 A M I AMI_OEM 5000717 MSFT 97)
39 [ 0.000000] ACPI: HPET BFFD5480, 0038 (r1 A M I OEMHPET0 5000717 MSFT 97)
40 [ 0.000000] ACPI: SSDT BFFD54C0, 01C4 (r1 A M I POWERNOW 1 AMD 1)
41 [ 0.000000] ACPI: Local APIC address 0xfee00000
42 [ 0.000000] No NUMA configuration found
43 [ 0.000000] Faking a node at 0000000000000000-00000001c0000000
44 [ 0.000000] Bootmem setup node 0 0000000000000000-00000001c0000000
45 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000003fff]
46 [ 0.000000] bootmap [000000000000e000 - 0000000000045fff] pages 38
47 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 01c0000000]
48 [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
49 [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
50 [ 0.000000] #2 [0000400000 - 0000931528] TEXT DATA BSS ==> [0000400000 - 0000931528]
51 [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
52 [ 0.000000] #4 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
53 [ 0.000000] #5 [000000b000 - 000000e000] PGTABLE ==> [000000b000 - 000000e000]
54 [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
55 [ 0.000000] [ffffe20000000000-ffffe200061fffff] PMD -> [ffff880028200000-ffff88002d5fffff] on node 0
56 [ 0.000000] Zone PFN ranges:
57 [ 0.000000] DMA 0x00000000 -> 0x00001000
58 [ 0.000000] DMA32 0x00001000 -> 0x00100000
59 [ 0.000000] Normal 0x00100000 -> 0x001c0000
60 [ 0.000000] Movable zone start PFN for each node
61 [ 0.000000] early_node_map[3] active PFN ranges
62 [ 0.000000] 0: 0x00000000 -> 0x0000009f
63 [ 0.000000] 0: 0x00000100 -> 0x000bffd0
64 [ 0.000000] 0: 0x00100000 -> 0x001c0000
65 [ 0.000000] On node 0 totalpages: 1572719
66 [ 0.000000] DMA zone: 56 pages used for memmap
67 [ 0.000000] DMA zone: 1436 pages reserved
68 [ 0.000000] DMA zone: 2507 pages, LIFO batch:0
69 [ 0.000000] DMA32 zone: 14280 pages used for memmap
70 [ 0.000000] DMA32 zone: 768008 pages, LIFO batch:31
71 [ 0.000000] Normal zone: 10752 pages used for memmap
72 [ 0.000000] Normal zone: 775680 pages, LIFO batch:31
73 [ 0.000000] Detected use of extended apic ids on hypertransport bus
74 [ 0.000000] ACPI: PM-Timer IO Port: 0x2008
75 [ 0.000000] ACPI: Local APIC address 0xfee00000
76 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
77 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
78 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
79 [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
80 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
81 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
82 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
83 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
84 [ 0.000000] ACPI: IRQ0 used by override.
85 [ 0.000000] ACPI: IRQ2 used by override.
86 [ 0.000000] ACPI: IRQ9 used by override.
87 [ 0.000000] ACPI: IRQ14 used by override.
88 [ 0.000000] ACPI: IRQ15 used by override.
89 [ 0.000000] Using ACPI (MADT) for SMP configuration information
90 [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
91 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
92 [ 0.000000] nr_irqs_gsi: 24
93 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
94 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
95 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
96 [ 0.000000] PM: Registered nosave memory: 00000000bffd0000 - 00000000bffde000
97 [ 0.000000] PM: Registered nosave memory: 00000000bffde000 - 00000000c0000000
98 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000
99 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
100 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
101 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
102 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
103 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
104 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
105 [ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
106 [ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
107 [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
108 [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
109 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1546195
110 [ 0.000000] Policy zone: Normal
111 [ 0.000000] Kernel command line: root=/dev/sda2 ro
112 [ 0.000000] Initializing CPU#0
113 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
114 [ 0.000000] Fast TSC calibration using PIT
115 [ 0.000000] Detected 2000.314 MHz processor.
116 [ 0.000999] spurious 8259A interrupt: IRQ7.
117 [ 0.000999] Console: colour VGA+ 80x25
118 [ 0.000999] console [tty0] enabled
119 [ 0.000999] Checking aperture...
120 [ 0.000999] No AGP bridge found
121 [ 0.000999] Node 0: aperture @ 20000000 size 32 MB
122 [ 0.000999] Aperture pointing to e820 RAM. Ignoring.
123 [ 0.000999] Your BIOS doesn't leave a aperture memory hole
124 [ 0.000999] Please enable the IOMMU option in the BIOS setup
125 [ 0.000999] This costs you 64 MB of RAM
126 [ 0.000999] Mapping aperture over 65536 KB of RAM @ 20000000
127 [ 0.000999] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
128 [ 0.000999] Memory: 6133584k/7340032k available (3239k kernel code, 1049156k absent, 157292k reserved, 1320k data, 324k init)
129 [ 0.000999] hpet clockevent registered
130 [ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
131 [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.62 BogoMIPS (lpj=2000314)
132 [ 0.000999] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
133 [ 0.007037] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
134 [ 0.009669] Mount-cache hash table entries: 256
135 [ 0.009825] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
136 [ 0.009860] CPU: L2 Cache: 512K (64 bytes/line)
137 [ 0.009892] CPU 0/0x0 -> Node 0
138 [ 0.009922] tseg: 0000000000
139 [ 0.009931] CPU: Physical Processor ID: 0
140 [ 0.009963] CPU: Processor Core ID: 0
141 [ 0.010007] using C1E aware idle routine
142 [ 0.010050] ACPI: Core revision 20081204
143 [ 0.016830] Setting APIC routing to flat
144 [ 0.017311] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
145 [ 0.027355] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
146 [ 0.027995] Booting processor 1 APIC 0x1 ip 0x6000
147 [ 0.000999] Initializing CPU#1
148 [ 0.000999] Calibrating delay using timer specific routine.. 3999.74 BogoMIPS (lpj=1999871)
149 [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
150 [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
151 [ 0.000999] CPU 1/0x1 -> Node 0
152 [ 0.000999] CPU: Physical Processor ID: 0
153 [ 0.000999] CPU: Processor Core ID: 1
154 [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
155 [ 0.098269] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
156 [ 0.098607] Brought up 2 CPUs
157 [ 0.098638] Total of 2 processors activated (8000.37 BogoMIPS).
158 [ 0.099032] net_namespace: 1264 bytes
159 [ 0.099180] NET: Registered protocol family 16
160 [ 0.099180] node 0 link 0: io port [1000, ffffff]
161 [ 0.099180] node 0 link 0: io port [2000, 2fff]
162 [ 0.099180] TOM: 00000000c0000000 aka 3072M
163 [ 0.099180] node 0 link 0: mmio [e0000000, efffffff]
164 [ 0.099180] node 0 link 0: mmio [a0000, bffff]
165 [ 0.099180] node 0 link 0: mmio [c0000000, fe0bffff]
166 [ 0.099180] TOM2: 00000001c0000000 aka 7168M
167 [ 0.099180] bus: [00,ff] on node 0 link 0
168 [ 0.099180] bus: 00 index 0 io port: [0, ffff]
169 [ 0.099180] bus: 00 index 1 mmio: [c0000000, ffffffff]
170 [ 0.099180] bus: 00 index 2 mmio: [a0000, bffff]
171 [ 0.099180] bus: 00 index 3 mmio: [1c0000000, fcffffffff]
172 [ 0.099180] ACPI: bus type pci registered
173 [ 0.099180] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
174 [ 0.099180] PCI: Not using MMCONFIG.
175 [ 0.099180] PCI: Using configuration type 1 for base access
176 [ 0.102048] bio: create slab <bio-0> at 0
177 [ 0.103222] ACPI: EC: Look up EC in DSDT
178 [ 0.115025] ACPI: Interpreter enabled
179 [ 0.115058] ACPI: (supports S0 S1 S3 S4 S5)
180 [ 0.115211] ACPI: Using IOAPIC for interrupt routing
181 [ 0.115302] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
182 [ 0.121905] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
183 [ 0.132122] PCI: Using MMCONFIG at e0000000 - efffffff
184 [ 0.143170] ACPI: No dock devices found.
185 [ 0.144051] ACPI: PCI Root Bridge [PCI0] (0000:00)
186 [ 0.144117] pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2f7f]
187 [ 0.144143] pci 0000:00:01.1: reg 10 io port: [0x2900-0x293f]
188 [ 0.144152] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f]
189 [ 0.144156] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f]
190 [ 0.144184] pci 0000:00:01.1: PME# supported from D3hot D3cold
191 [ 0.144220] pci 0000:00:01.1: PME# disabled
192 [ 0.144268] pci 0000:00:02.0: reg 10 32bit mmio: [0xfbffb000-0xfbffbfff]
193 [ 0.144289] pci 0000:00:02.0: supports D1 D2
194 [ 0.144291] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
195 [ 0.144326] pci 0000:00:02.0: PME# disabled
196 [ 0.144368] pci 0000:00:02.1: reg 10 32bit mmio: [0xfbffac00-0xfbffacff]
197 [ 0.144391] pci 0000:00:02.1: supports D1 D2
198 [ 0.144393] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
199 [ 0.144427] pci 0000:00:02.1: PME# disabled
200 [ 0.144474] pci 0000:00:05.0: reg 10 io port: [0xd480-0xd487]
201 [ 0.144478] pci 0000:00:05.0: reg 14 io port: [0xd400-0xd403]
202 [ 0.144481] pci 0000:00:05.0: reg 18 io port: [0xd080-0xd087]
203 [ 0.144484] pci 0000:00:05.0: reg 1c io port: [0xd000-0xd003]
204 [ 0.144487] pci 0000:00:05.0: reg 20 io port: [0xcc00-0xcc0f]
205 [ 0.144490] pci 0000:00:05.0: reg 24 32bit mmio: [0xfbff9000-0xfbff9fff]
206 [ 0.144518] pci 0000:00:05.1: reg 10 io port: [0xc880-0xc887]
207 [ 0.144521] pci 0000:00:05.1: reg 14 io port: [0xc800-0xc803]
208 [ 0.144524] pci 0000:00:05.1: reg 18 io port: [0xc480-0xc487]
209 [ 0.144527] pci 0000:00:05.1: reg 1c io port: [0xc400-0xc403]
210 [ 0.144530] pci 0000:00:05.1: reg 20 io port: [0xc080-0xc08f]
211 [ 0.144534] pci 0000:00:05.1: reg 24 32bit mmio: [0xfbff8000-0xfbff8fff]
212 [ 0.144560] pci 0000:00:05.2: reg 10 io port: [0xc000-0xc007]
213 [ 0.144563] pci 0000:00:05.2: reg 14 io port: [0xbc00-0xbc03]
214 [ 0.144567] pci 0000:00:05.2: reg 18 io port: [0xb880-0xb887]
215 [ 0.144570] pci 0000:00:05.2: reg 1c io port: [0xb800-0xb803]
216 [ 0.144573] pci 0000:00:05.2: reg 20 io port: [0xb480-0xb48f]
217 [ 0.144576] pci 0000:00:05.2: reg 24 32bit mmio: [0xfbff7000-0xfbff7fff]
218 [ 0.144626] pci 0000:00:06.1: reg 10 32bit mmio: [0xfbff0000-0xfbff3fff]
219 [ 0.144654] pci 0000:00:06.1: PME# supported from D3hot D3cold
220 [ 0.144688] pci 0000:00:06.1: PME# disabled
221 [ 0.144739] pci 0000:00:08.0: reg 10 32bit mmio: [0xfbff6000-0xfbff6fff]
222 [ 0.144742] pci 0000:00:08.0: reg 14 io port: [0xb400-0xb407]
223 [ 0.144745] pci 0000:00:08.0: reg 18 32bit mmio: [0xfbffa800-0xfbffa8ff]
224 [ 0.144749] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfbffa400-0xfbffa40f]
225 [ 0.144776] pci 0000:00:08.0: supports D1 D2
226 [ 0.144778] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
227 [ 0.144981] pci 0000:00:08.0: PME# disabled
228 [ 0.145039] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
229 [ 0.145074] pci 0000:00:0a.0: PME# disabled
230 [ 0.145131] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
231 [ 0.145165] pci 0000:00:0b.0: PME# disabled
232 [ 0.145222] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
233 [ 0.145256] pci 0000:00:0c.0: PME# disabled
234 [ 0.145312] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
235 [ 0.145347] pci 0000:00:0d.0: PME# disabled
236 [ 0.145403] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
237 [ 0.145437] pci 0000:00:0e.0: PME# disabled
238 [ 0.145493] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
239 [ 0.145528] pci 0000:00:0f.0: PME# disabled
240 [ 0.145645] pci 0000:00:06.0: transparent bridge
241 [ 0.145827] pci 0000:07:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
242 [ 0.145833] pci 0000:07:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
243 [ 0.145840] pci 0000:07:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
244 [ 0.145844] pci 0000:07:00.0: reg 24 io port: [0xec00-0xec7f]
245 [ 0.145848] pci 0000:07:00.0: reg 30 32bit mmio: [0xfebe0000-0xfebfffff]
246 [ 0.145893] pci 0000:00:0f.0: bridge io port: [0xe000-0xefff]
247 [ 0.145895] pci 0000:00:0f.0: bridge 32bit mmio: [0xfc000000-0xfebfffff]
248 [ 0.145898] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
249 [ 0.145912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
250 [ 0.146219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
251 [ 0.146379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
252 [ 0.146452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
253 [ 0.146524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
254 [ 0.146596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
255 [ 0.146668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
256 [ 0.146740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
257 [ 0.158996] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
258 [ 0.160230] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
259 [ 0.160678] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
260 [ 0.161144] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
261 [ 0.161592] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
262 [ 0.162048] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
263 [ 0.162475] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
264 [ 0.162922] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
265 [ 0.163358] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *14
266 [ 0.163784] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
267 [ 0.164227] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
268 [ 0.164655] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
269 [ 0.165111] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *14
270 [ 0.165538] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
271 [ 0.165964] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
272 [ 0.166377] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
273 [ 0.166803] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
274 [ 0.167274] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
275 [ 0.167722] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *5
276 [ 0.168026] ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 8E, should be 8D [20081204]
277 [ 0.168135] SCSI subsystem initialized
278 [ 0.168135] libata version 3.00 loaded.
279 [ 0.168135] usbcore: registered new interface driver usbfs
280 [ 0.168135] usbcore: registered new interface driver hub
281 [ 0.168135] usbcore: registered new device driver usb
282 [ 0.168989] PCI: Using ACPI for IRQ routing
283 [ 0.174079] PCI-DMA: Disabling AGP.
284 [ 0.174182] PCI-DMA: aperture base @ 20000000 size 65536 KB
285 [ 0.174182] PCI-DMA: using GART IOMMU.
286 [ 0.174182] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
287 [ 0.174630] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
288 [ 0.175047] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
289 [ 0.177983] Switched to high resolution mode on CPU 0
290 [ 0.178268] Switched to high resolution mode on CPU 1
291 [ 0.181032] pnp: PnP ACPI init
292 [ 0.181070] ACPI: bus type pnp registered
293 [ 0.188258] pnp: PnP ACPI: found 15 devices
294 [ 0.188291] ACPI: ACPI bus type pnp unregistered
295 [ 0.188334] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
296 [ 0.188368] system 00:06: ioport range 0x800-0x80f has been reserved
297 [ 0.188403] system 00:06: ioport range 0x2000-0x207f has been reserved
298 [ 0.188438] system 00:06: ioport range 0x2080-0x20ff has been reserved
299 [ 0.188472] system 00:06: ioport range 0x2400-0x247f has been reserved
300 [ 0.188507] system 00:06: ioport range 0x2480-0x24ff has been reserved
301 [ 0.188541] system 00:06: ioport range 0x2800-0x287f has been reserved
302 [ 0.188576] system 00:06: ioport range 0x2880-0x28ff has been reserved
303 [ 0.188611] system 00:06: ioport range 0x2c00-0x2c7f has been reserved
304 [ 0.188645] system 00:06: ioport range 0x2c80-0x2cff has been reserved
305 [ 0.188680] system 00:06: iomem range 0xfbf80000-0xfbfbffff has been reserved
306 [ 0.188716] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
307 [ 0.188754] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
308 [ 0.188789] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
309 [ 0.188828] system 00:0b: ioport range 0xa00-0xa0f has been reserved
310 [ 0.188863] system 00:0b: ioport range 0xa10-0xa1f has been reserved
311 [ 0.188899] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
312 [ 0.188937] system 00:0d: iomem range 0xd0000000-0xdfffffff has been reserved
313 [ 0.188975] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
314 [ 0.189019] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
315 [ 0.189053] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
316 [ 0.189089] system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved
317 [ 0.189131] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
318 [ 0.193829] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
319 [ 0.193862] pci 0000:00:06.0: IO window: disabled
320 [ 0.193896] pci 0000:00:06.0: MEM window: disabled
321 [ 0.193929] pci 0000:00:06.0: PREFETCH window: disabled
322 [ 0.193963] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
323 [ 0.193996] pci 0000:00:0a.0: IO window: disabled
324 [ 0.194037] pci 0000:00:0a.0: MEM window: disabled
325 [ 0.194070] pci 0000:00:0a.0: PREFETCH window: disabled
326 [ 0.194104] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
327 [ 0.194137] pci 0000:00:0b.0: IO window: disabled
328 [ 0.194170] pci 0000:00:0b.0: MEM window: disabled
329 [ 0.194202] pci 0000:00:0b.0: PREFETCH window: disabled
330 [ 0.194236] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
331 [ 0.194273] pci 0000:00:0c.0: IO window: disabled
332 [ 0.194306] pci 0000:00:0c.0: MEM window: disabled
333 [ 0.194339] pci 0000:00:0c.0: PREFETCH window: disabled
334 [ 0.194373] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
335 [ 0.194406] pci 0000:00:0d.0: IO window: disabled
336 [ 0.194439] pci 0000:00:0d.0: MEM window: disabled
337 [ 0.194471] pci 0000:00:0d.0: PREFETCH window: disabled
338 [ 0.194505] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06
339 [ 0.194538] pci 0000:00:0e.0: IO window: disabled
340 [ 0.194571] pci 0000:00:0e.0: MEM window: disabled
341 [ 0.194604] pci 0000:00:0e.0: PREFETCH window: disabled
342 [ 0.194638] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07
343 [ 0.194672] pci 0000:00:0f.0: IO window: 0xe000-0xefff
344 [ 0.194706] pci 0000:00:0f.0: MEM window: 0xfc000000-0xfebfffff
345 [ 0.194740] pci 0000:00:0f.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
346 [ 0.194787] pci 0000:00:06.0: setting latency timer to 64
347 [ 0.194790] pci 0000:00:0a.0: setting latency timer to 64
348 [ 0.194794] pci 0000:00:0b.0: setting latency timer to 64
349 [ 0.194797] pci 0000:00:0c.0: setting latency timer to 64
350 [ 0.194801] pci 0000:00:0d.0: setting latency timer to 64
351 [ 0.194804] pci 0000:00:0e.0: setting latency timer to 64
352 [ 0.194808] pci 0000:00:0f.0: setting latency timer to 64
353 [ 0.194811] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
354 [ 0.194813] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
355 [ 0.194815] pci_bus 0000:01: resource 0 mem: [0x0-0x0]
356 [ 0.194817] pci_bus 0000:01: resource 1 mem: [0x0-0x0]
357 [ 0.194819] pci_bus 0000:01: resource 2 mem: [0x0-0x0]
358 [ 0.194820] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
359 [ 0.194822] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
360 [ 0.194824] pci_bus 0000:02: resource 0 mem: [0x0-0x0]
361 [ 0.194826] pci_bus 0000:02: resource 1 mem: [0x0-0x0]
362 [ 0.194828] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
363 [ 0.194829] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
364 [ 0.194831] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
365 [ 0.194833] pci_bus 0000:03: resource 1 mem: [0x0-0x0]
366 [ 0.194834] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
367 [ 0.194836] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
368 [ 0.194838] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
369 [ 0.194840] pci_bus 0000:04: resource 1 mem: [0x0-0x0]
370 [ 0.194841] pci_bus 0000:04: resource 2 mem: [0x0-0x0]
371 [ 0.194843] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
372 [ 0.194845] pci_bus 0000:05: resource 0 mem: [0x0-0x0]
373 [ 0.194846] pci_bus 0000:05: resource 1 mem: [0x0-0x0]
374 [ 0.194848] pci_bus 0000:05: resource 2 mem: [0x0-0x0]
375 [ 0.194850] pci_bus 0000:05: resource 3 mem: [0x0-0x0]
376 [ 0.194852] pci_bus 0000:06: resource 0 mem: [0x0-0x0]
377 [ 0.194853] pci_bus 0000:06: resource 1 mem: [0x0-0x0]
378 [ 0.194855] pci_bus 0000:06: resource 2 mem: [0x0-0x0]
379 [ 0.194857] pci_bus 0000:06: resource 3 mem: [0x0-0x0]
380 [ 0.194859] pci_bus 0000:07: resource 0 io: [0xe000-0xefff]
381 [ 0.194861] pci_bus 0000:07: resource 1 mem: [0xfc000000-0xfebfffff]
382 [ 0.194863] pci_bus 0000:07: resource 2 mem: [0xc0000000-0xcfffffff]
383 [ 0.194864] pci_bus 0000:07: resource 3 mem: [0x0-0x0]
384 [ 0.194929] NET: Registered protocol family 2
385 [ 0.206285] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
386 [ 0.208451] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
387 [ 0.213806] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
388 [ 0.214455] TCP: Hash tables configured (established 524288 bind 65536)
389 [ 0.214491] TCP reno registered
390 [ 0.217102] NET: Registered protocol family 1
391 [ 0.218988] VFS: Disk quotas dquot_6.5.2
392 [ 0.219065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
393 [ 0.219256] msgmni has been set to 11979
394 [ 0.219837] alg: No test for stdrng (krng)
395 [ 0.219882] io scheduler noop registered
396 [ 0.219915] io scheduler anticipatory registered
397 [ 0.219947] io scheduler deadline registered
398 [ 0.219998] io scheduler cfq registered (default)
399 [ 0.220178] pci 0000:00:00.0: Found enabled HT MSI Mapping
400 [ 0.220245] pci 0000:00:00.0: Found enabled HT MSI Mapping
401 [ 0.220317] pci 0000:00:00.0: Found enabled HT MSI Mapping
402 [ 0.220384] pci 0000:00:00.0: Found enabled HT MSI Mapping
403 [ 0.220453] pci 0000:00:00.0: Found enabled HT MSI Mapping
404 [ 0.220528] pci 0000:00:00.0: Found enabled HT MSI Mapping
405 [ 0.220606] pci 0000:00:00.0: Found enabled HT MSI Mapping
406 [ 0.220687] pci 0000:00:00.0: Found enabled HT MSI Mapping
407 [ 0.220771] pci 0000:00:00.0: Found enabled HT MSI Mapping
408 [ 0.220860] pci 0000:00:00.0: Found enabled HT MSI Mapping
409 [ 0.220952] pci 0000:00:00.0: Found enabled HT MSI Mapping
410 [ 0.221060] pci 0000:00:00.0: Found enabled HT MSI Mapping
411 [ 0.221104] pci 0000:07:00.0: Boot video device
412 [ 0.221220] pcieport-driver 0000:00:0a.0: setting latency timer to 64
413 [ 0.221251] pcieport-driver 0000:00:0a.0: irq 24 for MSI/MSI-X
414 [ 0.221360] pcieport-driver 0000:00:0b.0: setting latency timer to 64
415 [ 0.221387] pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X
416 [ 0.221487] pcieport-driver 0000:00:0c.0: setting latency timer to 64
417 [ 0.221513] pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X
418 [ 0.221616] pcieport-driver 0000:00:0d.0: setting latency timer to 64
419 [ 0.221642] pcieport-driver 0000:00:0d.0: irq 27 for MSI/MSI-X
420 [ 0.221744] pcieport-driver 0000:00:0e.0: setting latency timer to 64
421 [ 0.221770] pcieport-driver 0000:00:0e.0: irq 28 for MSI/MSI-X
422 [ 0.221871] pcieport-driver 0000:00:0f.0: setting latency timer to 64
423 [ 0.221897] pcieport-driver 0000:00:0f.0: irq 29 for MSI/MSI-X
424 [ 0.225827] Non-volatile memory driver v1.3
425 [ 0.225861] Linux agpgart interface v0.103
426 [ 0.226225] processor ACPI_CPU:00: registered as cooling_device0
427 [ 0.226323] processor ACPI_CPU:01: registered as cooling_device1
428 [ 0.231263] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
429 [ 0.231572] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
430 [ 0.232465] loop: module loaded
431 [ 0.232516] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
432 [ 0.232910] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
433 [ 0.232951] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
434 [ 0.232996] forcedeth 0000:00:08.0: setting latency timer to 64
435 [ 0.233081] nv_probe: set workaround bit for reversed mac addr
436 [ 0.748549] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:16:17:93:aa:7f
437 [ 0.748594] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
438 [ 0.748724] Driver 'sd' needs updating - please use bus_type methods
439 [ 0.748803] sata_nv 0000:00:05.0: version 3.5
440 [ 0.749124] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
441 [ 0.749163] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
442 [ 0.749206] sata_nv 0000:00:05.0: Using SWNCQ mode
443 [ 0.749451] sata_nv 0000:00:05.0: setting latency timer to 64
444 [ 0.749580] scsi0 : sata_nv
445 [ 0.749757] scsi1 : sata_nv
446 [ 0.749984] ata1: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 22
447 [ 0.750028] ata2: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 22
448 [ 1.624050] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
449 [ 1.627247] ata1.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
450 [ 1.627290] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
451 [ 1.633928] ata1.00: configured for UDMA/133
452 [ 1.634060] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
453 [ 1.634275] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
454 [ 1.634328] sd 0:0:0:0: [sda] Write Protect is off
455 [ 1.634360] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
456 [ 1.634378] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
457 [ 1.634469] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
458 [ 1.634520] sd 0:0:0:0: [sda] Write Protect is off
459 [ 1.634553] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
460 [ 1.634569] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
461 [ 1.634614] sda: sda1 sda2 sda3 sda4
462 [ 1.650972] sd 0:0:0:0: [sda] Attached SCSI disk
463 [ 2.384297] ata2: SATA link down (SStatus 0 SControl 300)
464 [ 2.384689] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 21
465 [ 2.384731] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 21 (level, low) -> IRQ 21
466 [ 2.384774] sata_nv 0000:00:05.1: Using SWNCQ mode
467 [ 2.385039] sata_nv 0000:00:05.1: setting latency timer to 64
468 [ 2.385160] scsi2 : sata_nv
469 [ 2.385314] scsi3 : sata_nv
470 [ 2.385543] ata3: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 21
471 [ 2.385578] ata4: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 21
472 [ 3.118297] ata3: SATA link down (SStatus 0 SControl 300)
473 [ 3.851296] ata4: SATA link down (SStatus 0 SControl 300)
474 [ 3.851661] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 20
475 [ 3.851701] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 20 (level, low) -> IRQ 20
476 [ 3.851744] sata_nv 0000:00:05.2: Using SWNCQ mode
477 [ 3.851990] sata_nv 0000:00:05.2: setting latency timer to 64
478 [ 3.852124] scsi4 : sata_nv
479 [ 3.852281] scsi5 : sata_nv
480 [ 3.852505] ata5: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 20
481 [ 3.852540] ata6: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 20
482 [ 4.727050] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
483 [ 4.746114] ata5.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100
484 [ 4.768127] ata5.00: configured for UDMA/100
485 [ 4.770031] scsi 4:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5
486 [ 5.503297] ata6: SATA link down (SStatus 0 SControl 300)
487 [ 5.503408] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
488 [ 5.503771] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
489 [ 5.503806] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
490 [ 5.503860] ehci_hcd 0000:00:02.1: setting latency timer to 64
491 [ 5.503862] ehci_hcd 0000:00:02.1: EHCI Host Controller
492 [ 5.503972] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
493 [ 5.504047] ehci_hcd 0000:00:02.1: debug port 1
494 [ 5.504081] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
495 [ 5.504099] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfbffac00
496 [ 5.510012] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
497 [ 5.510150] usb usb1: configuration #1 chosen from 1 choice
498 [ 5.510245] hub 1-0:1.0: USB hub found
499 [ 5.510288] hub 1-0:1.0: 10 ports detected
500 [ 5.510621] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
501 [ 5.510977] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
502 [ 5.511021] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
503 [ 5.511075] ohci_hcd 0000:00:02.0: setting latency timer to 64
504 [ 5.511077] ohci_hcd 0000:00:02.0: OHCI Host Controller
505 [ 5.511164] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
506 [ 5.511216] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfbffb000
507 [ 5.564109] usb usb2: configuration #1 chosen from 1 choice
508 [ 5.564192] hub 2-0:1.0: USB hub found
509 [ 5.564229] hub 2-0:1.0: 10 ports detected
510 [ 5.564559] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
511 [ 5.567184] serio: i8042 KBD port at 0x60,0x64 irq 1
512 [ 5.567221] serio: i8042 AUX port at 0x60,0x64 irq 12
513 [ 5.567378] mice: PS/2 mouse device common for all mice
514 [ 5.567626] rtc_cmos 00:02: RTC can wake from S4
515 [ 5.567723] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
516 [ 5.567789] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
517 [ 5.567866] cpuidle: using governor ladder
518 [ 5.567898] cpuidle: using governor menu
519 [ 5.568373] TCP cubic registered
520 [ 5.568405] NET: Registered protocol family 17
521 [ 5.568443] NET: Registered protocol family 15
522 [ 5.568630] TuxOnIce 3.0.1 (http://tuxonice.net)
523 [ 5.568715] Replacing swsusp.
524 [ 6.227857] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input0
525 [ 6.261610] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
526 [ 6.286770] TuxOnIce: Normal swapspace found.
527 [ 6.287545] rtc_cmos 00:02: setting system clock to 2009-10-31 10:13:31 UTC (1256984011)
528 [ 6.287589] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
529 [ 6.329111] kjournald starting. Commit interval 5 seconds
530 [ 6.329150] EXT3-fs: mounted filesystem with ordered data mode.
531 [ 6.329190] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
532 [ 6.329236] Freeing unused kernel memory: 324k freed
533 [ 8.381530] udev: starting version 141
534 [ 8.646686] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
535 [ 8.653295] ACPI: Power Button (FF) [PWRF]
536 [ 8.653365] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
537 [ 8.661295] ACPI: Power Button (CM) [PWRB]
538 [ 8.708657] 00:05: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
539 [ 8.752023] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
540 [ 8.795178] input: PC Speaker as /devices/platform/pcspkr/input/input4
541 [ 8.816552] sd 0:0:0:0: Attached scsi generic sg0 type 0
542 [ 8.816579] scsi 4:0:0:0: Attached scsi generic sg1 type 5
543 [ 8.846690] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
544 [ 8.846706] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
545 [ 8.884418] Driver 'sr' needs updating - please use bus_type methods
546 [ 8.889952] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
547 [ 8.889956] Uniform CD-ROM driver Revision: 3.20
548 [ 8.890039] sr 4:0:0:0: Attached scsi CD-ROM sr0
549 [ 10.887943] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
550 [ 10.887948] HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
551 [ 10.888013] HDA Intel 0000:00:06.1: setting latency timer to 64
552 [ 10.974093] nvidia: module license 'NVIDIA' taints kernel.
553 [ 11.302578] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
554 [ 11.302590] nvidia 0000:07:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
555 [ 11.302597] nvidia 0000:07:00.0: setting latency timer to 64
556 [ 11.302860] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.60 Mon May 11 15:27:42 PDT 2009
557 [ 11.984838] EXT3 FS on sda2, internal journal
558 [ 13.098743] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
559 [ 13.098795] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe
560 [ 13.098798] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10
561 [ 13.098800] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
562 [ 13.500033] Clocksource tsc unstable (delta = -176665915 ns)
563 [ 13.973310] kjournald starting. Commit interval 5 seconds
564 [ 13.973682] EXT3 FS on sda4, internal journal
565 [ 13.973691] EXT3-fs: mounted filesystem with ordered data mode.
566 [ 14.076420] Adding 5863716k swap on /dev/sda3. Priority:2 extents:1 across:5863716k
567 [ 34.524817] forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
568 [ 34.525044] eth0: no link during initialization.
569 [ 36.335007] eth0: link up.
570 [ 49.794361] IRQ 19/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
571 [ 60.365906] fuse init (API version 7.11)
572 [ 60.786043] w83627ehf: Found W83627EHG chip at 0xa10
573 [ 65.049617] /dev/vmmon[5946]: Module vmmon: registered with major=10 minor=165
574 [ 65.049640] /dev/vmmon[5946]: Initial HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0
575 [ 65.049650] /dev/vmmon[5946]: HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0
576 [ 65.049654] /dev/vmmon[5946]: Module vmmon: initialized
577 [ 65.107049] /dev/vmci[5964]: VMCI: Driver initialized.
578 [ 65.107138] /dev/vmci[5964]: Module vmci: registered with major=10 minor=60
579 [ 65.107142] /dev/vmci[5964]: Module vmci: initialized
580 [ 65.293372] ppdev: user-space parallel port driver
581 [ 65.414049] /dev/vmnet: open called by PID 6040 (vmnet-bridge)
582 [ 65.414069] /dev/vmnet: hub 0 does not exist, allocating memory.
583 [ 65.414089] /dev/vmnet: port on hub 0 successfully opened
584 [ 65.414112] bridge-eth0: up
585 [ 65.414117] bridge-eth0: attached