syslinux/repos/core-x86_64/syslinux-install_update

   1 #!/usr/bin/bash
   2 #
   3 # Syslinux Installer / Updater Script (for BIOS only)
   4 # Copyright (C) 2011-2013  Matthew Gyurgyik <pyther@pyther.net>
   5 # Copyright (C) 2013  Keshav Padram Amburay <(the) (ddoott) (ridikulus) (ddoott) (rat) (aatt) (gemmaeiil) (ddoott) (ccoomm)>
   6 #
   7 # This program is free software; you can redistribute it and/or
   8 # modify it under the terms of the GNU General Public License
   9 # as published by the Free Software Foundation; either version 2
  10 # of the License, or (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  20 #
  21 #-----------------
  22 # ChangeLog:
  23 # 2013-10-23 : Keshav Padram Amburay : Updated script to work with Syslinux 6.02 Arch Linux pkg
  24 #-----------------
  25 # Exit Codes:
  26 #   1 - get_boot_device or other function failed
  27 #   2 - install/update failed
  28 #   3 - set_active failed
  29 #   4 - install_mbr failed
  30 #-----------------
  31
  32 shopt -s nullglob
  33
  34 bios_libpath="/usr/lib/syslinux/bios"
  35 bios_bootpath="/boot/syslinux"
  36 EXTLINUX="/usr/bin/extlinux"
  37
  38 bios_autoupdate_file="/boot/syslinux/SYSLINUX_AUTOUPDATE"
  39 pciids_file="/usr/share/hwdata/pci.ids"
  40
  41 ## Helper functions ##
  42 # Taken from libui-sh
  43 # $1 needle
  44 # $2 set (array) haystack
  45 check_is_in() {
  46     local needle="$1" element
  47     shift
  48     for element; do
  49         [[ $element = $needle ]] && return 0
  50     done
  51     return 1
  52 }
  53
  54 get_disk() {
  55     local part=$1
  56     if [[ ! -b "${part}" ]]; then
  57         echo >&2 "error: '$part' is not a valid block device!"
  58         exit 1
  59     fi
  60
  61     case "$part" in
  62         # catch cases like mmcblk0p1 and loop0p3
  63         *[[:digit:]]p[[:digit:]]*)
  64             local disk="${part%p[[:digit:]]}" # get everything before p1
  65             ;;
  66         *)
  67             local disk="${part%%[[:digit:]]*}"
  68             ;;
  69     esac
  70     if [[ ! -b "${disk}" ]]; then
  71         echo >&2 "error: '$disk' is not a valid block device!"
  72         exit 1
  73     fi
  74     echo $disk
  75 }
  76
  77 # return true when blockdevice is an md raid, otherwise return a unset value
  78 # get all devices that are part of raid device $1
  79 device_is_raid() {
  80     [[ $1 && -f /proc/mdstat ]] || return 1
  81     local devmajor=$(stat -c %t "$1")
  82     (( devmajor == 9 ))
  83 }
  84
  85 mdraid_all_slaves() {
  86     local slave slaves
  87     for slave in /sys/class/block/${1##*/}/slaves/*; do
  88         source "$slave/uevent"
  89         slaves="$slaves/dev/$DEVNAME "
  90         unset DEVNAME
  91     done
  92     echo $slaves
  93 }
  94
  95 # Check /sys/block to see if device is partitioned
  96 # If we have a partitioned block device (sda1) /sys/block/sda1/dev will not exist
  97 # However, if we have an unpartitioned block device (sda) /sys/block/sda/dev will exist
  98 dev_is_part() {
  99     # $1 - blockdevice
 100     local dev=$1
 101
 102     # If block device uevent file should be found
 103     # If a partition is passed in path shouldn't exist
 104     if [[ $dev = *cciss* ]]; then
 105         [[ -f /sys/block/cciss\!${dev##*/}/dev ]] && return 1
 106     elif [[ $dev = *ida* ]]; then
 107         [[ -f /sys/block/ida\!${dev##*/}/dev ]] && return 1
 108     else
 109         [[ -f /sys/block/${dev##*/}/dev ]] && return 1
 110     fi
 111
 112     return 0
 113 }
 114
 115 # If EFI PART is present in the first 8 bytes then it must be a GPT disk
 116 device_is_gpt() {
 117     local partsig=$(dd if="$1" skip=64 bs=8 count=1 2>/dev/null)
 118     [[ $partsig = "EFI PART" ]]
 119 }
 120
 121 clear_gpt_attr2() {
 122     # $1 - Block Device, no partitions
 123     local disk=$1
 124
 125     # Special Exception for cciss controllers
 126     if [[ $disk = *cciss* ]]; then
 127         for part in /dev/cciss/${disk##*/}*p*; do
 128             local partnum="${part##*[[:alpha:]]}"
 129             sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
 130         done
 131     # Smart 2 Controllers
 132     elif [[ $disk = *ida* ]]; then
 133         for part in /dev/ida/${disk##*/}*p*; do
 134             local partnum="${part##*[[:alpha:]]}"
 135             sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
 136         done
 137     else
 138         for part in  /sys/block/${disk##*/}/${disk##*/}*; do
 139             local partnum="${part##*[[:alpha:]]}"
 140             sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
 141         done
 142     fi
 143     return 0
 144 }
 145
 146 usage() {
 147 cat << EOF
 148 usage: $0 options
 149
 150 This script will install or upgrade Syslinux (for BIOS only)
 151
 152 OPTIONS:
 153   -h    Show this message
 154   -i    Install Syslinux
 155   -u    Update Syslinux
 156   -a    Set Boot flag on boot partiton
 157   -m    Install Syslinux MBR
 158   -s    Updates Syslinux if /boot/syslinux/SYSLINUX_AUTOUPDATE exists
 159
 160  Arguments Required:
 161   -c    Chroot install (ex: -c /mnt)
 162
 163 Example Usage: $0 -i -a -m     # (install, set boot flag, install mbr)
 164                $0 -u           # (update)
 165 EOF
 166 }
 167
 168 # Trys to find the partition that /boot resides on
 169 # This will either be on /boot or / (root)
 170 getBoot() {
 171     if [[ ! -d "$bios_bootpath" ]]; then
 172         echo "Could not find $bios_bootpath"
 173         echo "Is boot mounted? Is Syslinux installed?"
 174         exit 1
 175     fi
 176
 177     syslinux_fs=(ext2 ext3 ext4 btrfs vfat xfs)
 178
 179     # Use DATA from findmnt see rc.sysint for more info
 180     if [[ -f /proc/self/mountinfo ]]; then
 181         read rootdev rootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/")
 182         read bootdev bootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/boot")
 183     else
 184         echo "Could not find /proc/self/mountinfo"
 185         echo "Are you running a kernel greater than 2.6.24?"
 186         exit 1
 187     fi
 188
 189     if [[ $bootfs ]]; then
 190         if ! check_is_in "$bootfs" "${syslinux_fs[@]}"; then
 191             echo "/boot file system is not supported by Syslinux"
 192             exit 1
 193         fi
 194         boot="boot"
 195         bootpart="$(readlink -f "$bootdev")"
 196     elif [[ $rootfs ]]; then
 197         if ! check_is_in "$rootfs" "${syslinux_fs[@]}"; then
 198             echo "/ (root) file system is not supported by Syslinux"
 199             exit 1
 200         fi
 201         boot="root"
 202         bootpart="$(readlink -f "$rootdev")"
 203     else
 204         echo "Could not find filesystem on / (root) or /boot."
 205         exit 1
 206     fi
 207 }
 208
 209 # We store the partition table type either gpt or mbr in var ptb
 210 # In rare cases a user could have one raid disk using mbr and another using gpt
 211 # In such cases we accept that the output may be incomplete
 212
 213 # Calls get_ptb() for $bootpart or for all device in RAID
 214 declare -A bootdevs
 215 get_boot_devices() {
 216     if device_is_raid "$bootpart"; then
 217         slaves=$(mdraid_all_slaves "$bootpart")
 218
 219         for slave in ${slaves[@]}; do
 220             local disk=$(get_disk "$slave")
 221             device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR"
 222             bootdevs[$slave]="$ptb"
 223         done
 224     else
 225         local disk=$(get_disk "$bootpart")
 226         device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR"
 227         bootdevs[$bootpart]="$ptb"
 228     fi
 229 }
 230
 231 # Function Assumes the boot partition should be marked as active
 232 # All other partitions should not have the boot flag set
 233 set_active() {
 234     # If any bootdev is a block device without partitions bail
 235     # we want to set the boot flag on partitioned disk
 236     for dev in "${!bootdevs[@]}"; do
 237         dev_is_part $dev || { echo "$dev does not contain partition table. Aborting set_active!"; return 1; }
 238     done
 239
 240     # Clear BIOS Bootable Legacy Attribute for GPT drives
 241     # In rare cases where a RAID device has slaves on the same block device
 242     # Attribute 2 will be cleared for each partition multiple times
 243     for dev in "${!bootdevs[@]}"; do
 244         local ptb="${bootdevs[$dev]}"
 245         if [[ "$ptb" = GPT ]]; then
 246             local disk=$(get_disk "$dev")
 247             clear_gpt_attr2 "$disk"
 248         fi
 249     done
 250
 251     # Set the boot flag on bootdevs (generated from get_boot_devices)
 252     for part in "${!bootdevs[@]}"; do
 253         local ptb="${bootdevs[$part]}"
 254         local partnum="${part##*[[:alpha:]]}"
 255         local disk=$(get_disk "$part")
 256
 257         if [[ "$ptb" = MBR ]]; then
 258             if sfdisk "$disk" --activate "$partnum" &>/dev/null; then
 259                 echo "Boot Flag Set - $part"
 260             else
 261                 echo "FAILED to Set the boot flag on $part"
 262                 exit 3
 263             fi
 264         elif [[ "$ptb" = GPT ]]; then
 265             if [[ ! -e /usr/bin/sgdisk ]]; then
 266                 echo "FAILED to set attribute Legacy BIOS Bootable. sgdisk is not found - please install 'gptfdisk' package."
 267                 exit 3
 268             fi
 269
 270             if sgdisk "$disk" --attributes="$partnum":set:2 &>/dev/null; then
 271                 echo "Attribute Legacy Bios Bootable Set - $part"
 272             else
 273                 echo "FAILED to set attribute Legacy BIOS Bootable on $part"
 274                 exit 3
 275             fi
 276         fi
 277     done
 278     return 0
 279 }
 280
 281 install_mbr() {
 282     # If any bootdev is a block device without partitions bail
 283     # we want to install the mbr to a partitioned disk
 284     for dev in "${!bootdevs[@]}"; do
 285         dev_is_part "$dev" || { echo "$dev does not contain partition table. Aborting MBR install."; return 1; }
 286     done
 287
 288     for part in "${!bootdevs[@]}"; do
 289         local partnum="${part##*[[:alpha:]]}"
 290         local disk=$(get_disk "$part")
 291         local ptb="${bootdevs[$part]}"
 292
 293         # We want to install to the root of the block device
 294         # If the device is a partition - ABORT!
 295         dev_is_part "$disk" && \
 296         { echo "ABORT! MBR installation to partition ($disk)!"; exit 4;}
 297
 298         if [[ "$ptb" = MBR ]]; then
 299             mbrfile="$bios_libpath/mbr.bin"
 300         elif [[ "$ptb" = GPT ]]; then
 301             mbrfile="$bios_libpath/gptmbr.bin"
 302         fi
 303
 304         if dd bs=440 count=1 conv=notrunc if="$mbrfile" of="$disk" &> /dev/null; then
 305             echo "Installed MBR ($mbrfile) to $disk"
 306         else
 307             echo "Error Installing MBR ($mbrfile) to $disk"
 308             exit 4
 309         fi
 310     done
 311     return 0
 312 }
 313
 314 install_modules() {
 315     # Copy all syslinux *.c32 modules to /boot
 316     rm "$bios_bootpath"/*.c32 &> /dev/null
 317     cp "$bios_libpath"/*.c32 "$bios_bootpath"/ &> /dev/null
 318
 319     # Copy / Symlink pci.ids if pci.ids exists on the FS
 320     if [[ -f "$pciids_file" ]]; then
 321         rm "$bios_bootpath/pci.ids" &> /dev/null
 322         cp "$pciids_file" "$bios_bootpath/pci.ids" &> /dev/null
 323     fi
 324 }
 325
 326 _install() {
 327     install_modules
 328
 329     if device_is_raid "$bootpart" ; then
 330         echo "Detected RAID on /boot - installing Syslinux with --raid"
 331         "$EXTLINUX" --install "$bios_bootpath" --raid &> /dev/null
 332     else
 333         "$EXTLINUX" --install "$bios_bootpath" &> /dev/null
 334     fi
 335
 336     if (( $? )); then
 337         echo "Syslinux BIOS install failed"
 338         exit 2
 339     else
 340         echo "Syslinux BIOS install successful"
 341     fi
 342
 343     touch "$CHROOT/$bios_autoupdate_file"
 344 }
 345
 346 update() {
 347     install_modules
 348
 349     if device_is_raid "$bootpart" ; then
 350         echo "Detected RAID on /boot - updating Syslinux with --raid"
 351         "$EXTLINUX" --update "$bios_bootpath" --raid &> /dev/null
 352     else
 353         "$EXTLINUX" --update "$bios_bootpath" &> /dev/null
 354     fi
 355
 356     if (($?)); then
 357         echo "Syslinux BIOS update failed"
 358         exit 2
 359     else
 360         echo "Syslinux BIOS update successful"
 361     fi
 362 }
 363
 364 if (( $# == 0 )); then
 365     usage
 366     exit 1
 367 fi
 368
 369 while getopts "c:uihmas" opt; do
 370     case $opt in
 371         c)
 372             CHROOT=$(readlink -e "$OPTARG")
 373             if [[ -z $CHROOT ]]; then
 374                 echo "error: chroot path ``$OPTARG does not exist";
 375                 exit 1
 376             fi
 377             ;;
 378         h)
 379             USAGE="True"
 380             ;;
 381         i)
 382             INSTALL="True"
 383             ;;
 384         u)
 385             UPDATE="True"
 386             ;;
 387         m)
 388             MBR="True"
 389             ;;
 390         a)
 391             SET_ACTIVE="True"
 392             ;;
 393         s)
 394             # If AUTOUPDATE_FILE does not exist exit the script
 395             if [[ -f $bios_autoupdate_file ]]; then
 396                 UPDATE="True"
 397             else
 398                 exit 0
 399             fi
 400             ;;
 401         *)
 402             usage
 403             exit 1
 404             ;;
 405     esac
 406 done
 407
 408 if [[ $USAGE ]]; then
 409     usage
 410     exit 0
 411 fi
 412
 413 # Display Usage Information if both Install and Update are passed
 414 if [[ $INSTALL && $UPDATE ]]; then
 415     usage
 416     exit 1
 417 fi
 418
 419 # Make sure only root can run our script
 420 if (( $(id -u) != 0 )); then
 421     echo "This script must be run as root" 1>&2
 422     exit 1
 423 fi
 424
 425 # If a chroot dir is path set variables to reflect chroot
 426 if [[ "$CHROOT" ]]; then
 427     bios_libpath="$CHROOT$bios_libpath"
 428     bios_bootpath="$CHROOT$bios_bootpath"
 429     EXTLINUX="$CHROOT$EXTLINUX"
 430 fi
 431
 432 # Exit if no /boot path exists
 433 if ( f=("$bios_bootpath"/*); (( ! ${#f[@]} )) ); then
 434     echo "Error: $bios_bootpath is empty!"
 435     echo "Is /boot mounted?"
 436     exit 1
 437 fi
 438
 439 # Get the boot device if any of these options are passed
 440 if [[ $INSTALL || $UPDATE || $SET_ACTIVE || $MBR ]]; then
 441     getBoot
 442 fi
 443
 444 # Install or Update
 445 if [[ $INSTALL ]]; then
 446     _install || exit
 447 elif [[ $UPDATE ]]; then
 448     update || exit
 449 fi
 450
 451
 452 # SET_ACTIVE and MBR
 453 if [[ $SET_ACTIVE ]] || [[ $MBR ]]; then
 454     get_boot_devices
 455
 456     if [[ $SET_ACTIVE ]]; then
 457         set_active || exit
 458     fi
 459
 460     if [[ $MBR ]]; then
 461         install_mbr || exit
 462     fi
 463 fi
 464
 465 exit 0