make/mcu/STM32F3.mk

   1 #
   2 # F3 Make file include
   3 #
   4
   5 ifeq ($(OPBL),yes)
   6 LD_SCRIPT = $(LINKER_DIR)/stm32_flash_f303_$(TARGET_FLASH_SIZE)k_opbl.ld
   7 endif
   8
   9 MCU_FLASH_SIZE  := 256
  10 # note that there is no hardfault debugging startup file assembly handler for other platforms
  11 ifeq ($(DEBUG_HARDFAULTS),F3)
  12 CFLAGS               += -DDEBUG_HARDFAULTS
  13 MCU_COMMON_SRC  = startup_stm32f3_debug_hardfault_handler.S
  14 else
  15 MCU_COMMON_SRC  = startup_stm32f30x_md_gcc.S
  16 endif
  17
  18 STDPERIPH_DIR   = $(ROOT)/lib/main/STM32F3/Drivers/STM32F30x_StdPeriph_Driver
  19 STDPERIPH_SRC   = $(notdir $(wildcard $(STDPERIPH_DIR)/src/*.c))
  20 EXCLUDES        = stm32f30x_crc.c \
  21                   stm32f30x_can.c
  22 STARTUP_SRC     = startup_stm32f30x_md_gcc.S
  23
  24 STDPERIPH_SRC   := $(filter-out ${EXCLUDES}, $(STDPERIPH_SRC))
  25 DEVICE_STDPERIPH_SRC = $(STDPERIPH_SRC)
  26
  27 VPATH           := $(VPATH):$(CMSIS_DIR)/Core/Include
  28 CMSIS_SRC       = $(notdir $(wildcard $(ROOT)/lib/main/STM32F3/Drivers/CMSIS/Device/ST/STM32F30x/*.c))
  29
  30 INCLUDE_DIRS    := $(INCLUDE_DIRS) \
  31                    $(STDPERIPH_DIR)/inc \
  32                    $(CMSIS_DIR)/Core/Include \
  33                    $(ROOT)/lib/main/STM32F3/Drivers/CMSIS/Device/ST/STM32F30x
  34
  35 ifneq ($(filter VCP, $(FEATURES)),)
  36 INCLUDE_DIRS    := $(INCLUDE_DIRS) \
  37                    $(USBFS_DIR)/inc \
  38                    $(ROOT)/src/main/vcp
  39
  40 VPATH           := $(VPATH):$(USBFS_DIR)/src
  41
  42 DEVICE_STDPERIPH_SRC := $(DEVICE_STDPERIPH_SRC)\
  43                         $(USBPERIPH_SRC)
  44 endif
  45
  46 ifneq ($(filter SDCARD_SPI, $(FEATURES)),)
  47 INCLUDE_DIRS    := $(INCLUDE_DIRS) \
  48                    $(FATFS_DIR) \
  49
  50 VPATH           := $(VPATH):$(FATFS_DIR)
  51 endif
  52
  53 ifneq ($(filter SDCARD_SDIO, $(FEATURES)),)
  54 INCLUDE_DIRS    := $(INCLUDE_DIRS) \
  55                    $(FATFS_DIR) \
  56
  57 VPATH           := $(VPATH):$(FATFS_DIR)
  58 endif
  59
  60 ifeq ($(LD_SCRIPT),)
  61 LD_SCRIPT       = $(LINKER_DIR)/stm32_flash_f303_$(TARGET_FLASH_SIZE)k.ld
  62 endif
  63
  64 ARCH_FLAGS      = -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -fsingle-precision-constant -Wdouble-promotion
  65 DEVICE_FLAGS    = -DSTM32F303xC -DSTM32F303
  66
  67 VCP_SRC = \
  68             vcp/hw_config.c \
  69             vcp/stm32_it.c \
  70             vcp/usb_desc.c \
  71             vcp/usb_endp.c \
  72             vcp/usb_istr.c \
  73             vcp/usb_prop.c \
  74             vcp/usb_pwr.c \
  75             drivers/serial_usb_vcp.c \
  76             drivers/usb_io.c
  77
  78
  79 MCU_COMMON_SRC = \
  80             startup/system_stm32f30x.c \
  81             drivers/adc_stm32f30x.c \
  82             drivers/bus_i2c_stm32f30x.c \
  83             drivers/bus_i2c_timing.c \
  84             drivers/bus_spi_stdperiph.c \
  85             drivers/dma.c \
  86             drivers/light_ws2811strip_stdperiph.c \
  87             drivers/transponder_ir_io_stdperiph.c \
  88             drivers/pwm_output_dshot.c \
  89             drivers/pwm_output_dshot_shared.c \
  90             drivers/serial_uart_stdperiph.c \
  91             drivers/serial_uart_stm32f30x.c \
  92             drivers/system_stm32f30x.c \
  93             drivers/timer_stm32f30x.c
  94
  95 DSP_LIB := $(ROOT)/lib/main/CMSIS/DSP
  96 DEVICE_FLAGS += -DARM_MATH_MATRIX_CHECK -DARM_MATH_ROUNDING -D__FPU_PRESENT=1 -DUNALIGNED_SUPPORT_DISABLE -DARM_MATH_CM4