src/config/ALIENWHOOPF4/config.h

   1 /*
   2  * This file is part of Betaflight.
   3  *
   4  * Betaflight is free software. You can redistribute this software
   5  * and/or modify this software under the terms of the GNU General
   6  * Public License as published by the Free Software Foundation,
   7  * either version 3 of the License, or (at your option) any later
   8  * version.
   9  *
  10  * Betaflight is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  13  *
  14  * See the GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public
  17  * License along with this software.
  18  *
  19  * If not, see <http://www.gnu.org/licenses/>.
  20  */
  21
  22 /*
  23    This file has been auto generated from unified-targets repo.
  24
  25    The auto generation is transitional only, please remove this comment once the file is edited.
  26 */
  27
  28 #define FC_TARGET_MCU     STM32F405
  29
  30 #define BOARD_NAME        ALIENWHOOPF4
  31 #define MANUFACTURER_ID   ALWH
  32
  33 #define USE_ACC_SPI_MPU6500
  34 #define USE_GYRO_SPI_MPU6500
  35 #define USE_MAX7456
  36
  37 #define BEEPER_PIN           PA2
  38 #define MOTOR1_PIN           PC9
  39 #define MOTOR2_PIN           PC8
  40 #define MOTOR3_PIN           PC7
  41 #define MOTOR4_PIN           PC6
  42 #define LED_STRIP_PIN        PA0
  43 #define UART1_TX_PIN         PA9
  44 #define UART2_TX_PIN         PA2
  45 #define UART3_TX_PIN         PC10
  46 #define UART4_TX_PIN         PA0
  47 #define UART1_RX_PIN         PA10
  48 #define UART2_RX_PIN         PA3
  49 #define UART3_RX_PIN         PC11
  50 #define UART4_RX_PIN         PA1
  51 #define LED0_PIN             PC12
  52 #define LED1_PIN             PD2
  53 #define SPEKTRUM_RX_BIND_PIN PC13
  54 #define SPI1_SCK_PIN         PA5
  55 #define SPI2_SCK_PIN         PB13
  56 #define SPI3_SCK_PIN         PB3
  57 #define SPI1_MISO_PIN        PA6
  58 #define SPI2_MISO_PIN        PB14
  59 #define SPI3_MISO_PIN        PB4
  60 #define SPI1_MOSI_PIN        PA7
  61 #define SPI2_MOSI_PIN        PB15
  62 #define SPI3_MOSI_PIN        PB5
  63 #define FLASH_CS_PIN         PA15
  64 #define MAX7456_SPI_CS_PIN   PB12
  65 #define GYRO_1_EXTI_PIN      PC14
  66 #define GYRO_1_CS_PIN        PA4
  67
  68 #define TIMER_PIN_MAPPING \
  69     TIMER_PIN_MAP( 0, PC9 , 2,  0) \
  70     TIMER_PIN_MAP( 1, PC8 , 1,  0) \
  71     TIMER_PIN_MAP( 2, PC7 , 1,  0) \
  72     TIMER_PIN_MAP( 3, PC6 , 2,  0) \
  73     TIMER_PIN_MAP( 4, PA0 , 2,  0)
  74
  75
  76
  77 #define ADC1_DMA_OPT        1
  78
  79 //TODO #define MAG_BUSTYPE SLAVE
  80 //TODO #define BLACKBOX_DEVICE SPIFLASH
  81 #define BEEPER_INVERTED
  82 //TODO #define BEEPER_OD OFF
  83 #define SYSTEM_HSE_MHZ 8
  84 #define MAX7456_SPI_INSTANCE SPI2
  85 #define FLASH_SPI_INSTANCE SPI3
  86 #define USE_SPI_GYRO
  87 #define GYRO_1_SPI_INSTANCE SPI1