src/main/startup/stm32f3xx_hal_conf.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32f3xx_hal_conf.h
   4   * @brief   HAL configuration file.
   5   ******************************************************************************
   6   * @attention
   7   *
   8   * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
   9   *
  10   * Redistribution and use in source and binary forms, with or without modification,
  11   * are permitted provided that the following conditions are met:
  12   *   1. Redistributions of source code must retain the above copyright notice,
  13   *      this list of conditions and the following disclaimer.
  14   *   2. Redistributions in binary form must reproduce the above copyright notice,
  15   *      this list of conditions and the following disclaimer in the documentation
  16   *      and/or other materials provided with the distribution.
  17   *   3. Neither the name of STMicroelectronics nor the names of its contributors
  18   *      may be used to endorse or promote products derived from this software
  19   *      without specific prior written permission.
  20   *
  21   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  22   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  23   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  24   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  25   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  26   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  27   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  28   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  29   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  30   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  31   *
  32   ******************************************************************************
  33   */
  34
  35 /* Define to prevent recursive inclusion -------------------------------------*/
  36 #ifndef __STM32F3xx_HAL_CONF_H
  37 #define __STM32F3xx_HAL_CONF_H
  38
  39 #ifdef __cplusplus
  40  extern "C" {
  41 #endif
  42
  43 /* Exported types ------------------------------------------------------------*/
  44 /* Exported constants --------------------------------------------------------*/
  45
  46 /* ########################## Module Selection ############################## */
  47 /**
  48   * @brief This is the list of modules to be used in the HAL driver
  49   */
  50 #define HAL_MODULE_ENABLED
  51 #define HAL_ADC_MODULE_ENABLED
  52 //#define HAL_CAN_MODULE_ENABLED
  53 //#define HAL_CEC_MODULE_ENABLED
  54 //#define HAL_COMP_MODULE_ENABLED
  55 #define HAL_CORTEX_MODULE_ENABLED
  56 //#define HAL_CRC_MODULE_ENABLED
  57 #define HAL_DAC_MODULE_ENABLED
  58 #define HAL_DMA_MODULE_ENABLED
  59 #define HAL_FLASH_MODULE_ENABLED
  60 //#define HAL_SRAM_MODULE_ENABLED
  61 //#define HAL_NOR_MODULE_ENABLED
  62 //#define HAL_NAND_MODULE_ENABLED
  63 //#define HAL_PCCARD_MODULE_ENABLED
  64 #define HAL_GPIO_MODULE_ENABLED
  65 //#define HAL_HRTIM_MODULE_ENABLED
  66 #define HAL_I2C_MODULE_ENABLED
  67 //#define HAL_I2S_MODULE_ENABLED
  68 //#define HAL_IRDA_MODULE_ENABLED
  69 //#define HAL_IWDG_MODULE_ENABLED
  70 //#define HAL_OPAMP_MODULE_ENABLED
  71 #define HAL_PCD_MODULE_ENABLED
  72 #define HAL_PWR_MODULE_ENABLED
  73 #define HAL_RCC_MODULE_ENABLED
  74 //#define HAL_RTC_MODULE_ENABLED
  75 //#define HAL_SDADC_MODULE_ENABLED
  76 //#define HAL_SMARTCARD_MODULE_ENABLED
  77 //#define HAL_SMBUS_MODULE_ENABLED
  78 #define HAL_SPI_MODULE_ENABLED
  79 #define HAL_TIM_MODULE_ENABLED
  80 //#define HAL_TSC_MODULE_ENABLED
  81 #define HAL_UART_MODULE_ENABLED
  82 #define HAL_USART_MODULE_ENABLED
  83 //#define HAL_WWDG_MODULE_ENABLED
  84
  85 /* ########################## HSE/HSI Values adaptation ##################### */
  86 /**
  87   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
  88   *        This value is used by the RCC HAL module to compute the system frequency
  89   *        (when HSE is used as system clock source, directly or through the PLL).
  90   */
  91 #if !defined  (HSE_VALUE)
  92   #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
  93 #endif /* HSE_VALUE */
  94
  95 /**
  96   * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
  97   *        Timeout value
  98   */
  99 #if !defined  (HSE_STARTUP_TIMEOUT)
 100   #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
 101 #endif /* HSE_STARTUP_TIMEOUT */
 102
 103 /**
 104   * @brief Internal High Speed oscillator (HSI) value.
 105   *        This value is used by the RCC HAL module to compute the system frequency
 106   *        (when HSI is used as system clock source, directly or through the PLL).
 107   */
 108 #if !defined  (HSI_VALUE)
 109   #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
 110 #endif /* HSI_VALUE */
 111
 112 /**
 113   * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
 114   *        Timeout value
 115   */
 116 #if !defined  (HSI_STARTUP_TIMEOUT)
 117  #define HSI_STARTUP_TIMEOUT   ((uint32_t)5000) /*!< Time out for HSI start up */
 118 #endif /* HSI_STARTUP_TIMEOUT */
 119
 120 /**
 121   * @brief Internal Low Speed oscillator (LSI) value.
 122   */
 123 #if !defined  (LSI_VALUE)
 124  #define LSI_VALUE  ((uint32_t)40000)
 125 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
 126                                              The real value may vary depending on the variations
 127                                              in voltage and temperature.  */
 128 /**
 129   * @brief External Low Speed oscillator (LSE) value.
 130   */
 131 #if !defined  (LSE_VALUE)
 132  #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
 133 #endif /* LSE_VALUE */
 134
 135 /**
 136   * @brief Time out for LSE start up value in ms.
 137   */
 138 #if !defined  (LSE_STARTUP_TIMEOUT)
 139   #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
 140 #endif /* LSE_STARTUP_TIMEOUT */
 141
 142 /**
 143   * @brief External clock source for I2S peripheral
 144   *        This value is used by the I2S HAL module to compute the I2S clock source
 145   *        frequency, this source is inserted directly through I2S_CKIN pad.
 146   *        - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal)
 147   *        - External clock not generated on EVAL 373
 148   */
 149 #if !defined  (EXTERNAL_CLOCK_VALUE)
 150   #define EXTERNAL_CLOCK_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/
 151 #endif /* EXTERNAL_CLOCK_VALUE */
 152
 153 /* Tip: To avoid modifying this file each time you need to use different HSE,
 154    ===  you can define the HSE value in your toolchain compiler preprocessor. */
 155
 156 /* ########################### System Configuration ######################### */
 157 /**
 158   * @brief This is the HAL system configuration section
 159   */
 160 #define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
 161 #define  TICK_INT_PRIORITY            ((uint32_t)(1<<__NVIC_PRIO_BITS) - 1)   /*!< tick interrupt priority (lowest by default) */
 162 #define  USE_RTOS                     0
 163 #define  PREFETCH_ENABLE              1
 164 #define  INSTRUCTION_CACHE_ENABLE     0
 165 #define  DATA_CACHE_ENABLE            0
 166
 167 /* ########################## Assert Selection ############################## */
 168 /**
 169   * @brief Uncomment the line below to expanse the "assert_param" macro in the
 170   *        HAL drivers code
 171   */
 172 /*#define USE_FULL_ASSERT    1*/
 173
 174 /* Includes ------------------------------------------------------------------*/
 175 /**
 176   * @brief Include module's header file
 177   */
 178
 179 #ifdef HAL_RCC_MODULE_ENABLED
 180  #include "stm32f3xx_hal_rcc.h"
 181 #endif /* HAL_RCC_MODULE_ENABLED */
 182
 183 #ifdef HAL_GPIO_MODULE_ENABLED
 184  #include "stm32f3xx_hal_gpio.h"
 185 #endif /* HAL_GPIO_MODULE_ENABLED */
 186
 187 #ifdef HAL_DMA_MODULE_ENABLED
 188   #include "stm32f3xx_hal_dma.h"
 189 #endif /* HAL_DMA_MODULE_ENABLED */
 190
 191 #ifdef HAL_CORTEX_MODULE_ENABLED
 192  #include "stm32f3xx_hal_cortex.h"
 193 #endif /* HAL_CORTEX_MODULE_ENABLED */
 194
 195 #ifdef HAL_ADC_MODULE_ENABLED
 196  #include "stm32f3xx_hal_adc.h"
 197 #endif /* HAL_ADC_MODULE_ENABLED */
 198
 199 #ifdef HAL_CAN_MODULE_ENABLED
 200  #include "stm32f3xx_hal_can.h"
 201 #endif /* HAL_CAN_MODULE_ENABLED */
 202
 203 #ifdef HAL_CEC_MODULE_ENABLED
 204  #include "stm32f3xx_hal_cec.h"
 205 #endif /* HAL_CEC_MODULE_ENABLED */
 206
 207 #ifdef HAL_COMP_MODULE_ENABLED
 208  #include "stm32f3xx_hal_comp.h"
 209 #endif /* HAL_COMP_MODULE_ENABLED */
 210
 211 #ifdef HAL_CRC_MODULE_ENABLED
 212  #include "stm32f3xx_hal_crc.h"
 213 #endif /* HAL_CRC_MODULE_ENABLED */
 214
 215 #ifdef HAL_DAC_MODULE_ENABLED
 216  #include "stm32f3xx_hal_dac.h"
 217 #endif /* HAL_DAC_MODULE_ENABLED */
 218
 219 #ifdef HAL_FLASH_MODULE_ENABLED
 220  #include "stm32f3xx_hal_flash.h"
 221 #endif /* HAL_FLASH_MODULE_ENABLED */
 222
 223 #ifdef HAL_SRAM_MODULE_ENABLED
 224   #include "stm32f3xx_hal_sram.h"
 225 #endif /* HAL_SRAM_MODULE_ENABLED */
 226
 227 #ifdef HAL_NOR_MODULE_ENABLED
 228   #include "stm32f3xx_hal_nor.h"
 229 #endif /* HAL_NOR_MODULE_ENABLED */
 230
 231 #ifdef HAL_NAND_MODULE_ENABLED
 232   #include "stm32f3xx_hal_nand.h"
 233 #endif /* HAL_NAND_MODULE_ENABLED */
 234
 235 #ifdef HAL_PCCARD_MODULE_ENABLED
 236   #include "stm32f3xx_hal_pccard.h"
 237 #endif /* HAL_PCCARD_MODULE_ENABLED */
 238
 239 #ifdef HAL_HRTIM_MODULE_ENABLED
 240  #include "stm32f3xx_hal_hrtim.h"
 241 #endif /* HAL_HRTIM_MODULE_ENABLED */
 242
 243 #ifdef HAL_I2C_MODULE_ENABLED
 244  #include "stm32f3xx_hal_i2c.h"
 245 #endif /* HAL_I2C_MODULE_ENABLED */
 246
 247 #ifdef HAL_I2S_MODULE_ENABLED
 248  #include "stm32f3xx_hal_i2s.h"
 249 #endif /* HAL_I2S_MODULE_ENABLED */
 250
 251 #ifdef HAL_IRDA_MODULE_ENABLED
 252  #include "stm32f3xx_hal_irda.h"
 253 #endif /* HAL_IRDA_MODULE_ENABLED */
 254
 255 #ifdef HAL_IWDG_MODULE_ENABLED
 256  #include "stm32f3xx_hal_iwdg.h"
 257 #endif /* HAL_IWDG_MODULE_ENABLED */
 258
 259 #ifdef HAL_OPAMP_MODULE_ENABLED
 260  #include "stm32f3xx_hal_opamp.h"
 261 #endif /* HAL_OPAMP_MODULE_ENABLED */
 262
 263 #ifdef HAL_PCD_MODULE_ENABLED
 264  #include "stm32f3xx_hal_pcd.h"
 265 #endif /* HAL_PCD_MODULE_ENABLED */
 266
 267 #ifdef HAL_PWR_MODULE_ENABLED
 268  #include "stm32f3xx_hal_pwr.h"
 269 #endif /* HAL_PWR_MODULE_ENABLED */
 270
 271 #ifdef HAL_RTC_MODULE_ENABLED
 272  #include "stm32f3xx_hal_rtc.h"
 273 #endif /* HAL_RTC_MODULE_ENABLED */
 274
 275 #ifdef HAL_SDADC_MODULE_ENABLED
 276  #include "stm32f3xx_hal_sdadc.h"
 277 #endif /* HAL_SDADC_MODULE_ENABLED */
 278
 279 #ifdef HAL_SMARTCARD_MODULE_ENABLED
 280  #include "stm32f3xx_hal_smartcard.h"
 281 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
 282
 283 #ifdef HAL_SMBUS_MODULE_ENABLED
 284  #include "stm32f3xx_hal_smbus.h"
 285 #endif /* HAL_SMBUS_MODULE_ENABLED */
 286
 287 #ifdef HAL_SPI_MODULE_ENABLED
 288  #include "stm32f3xx_hal_spi.h"
 289 #endif /* HAL_SPI_MODULE_ENABLED */
 290
 291 #ifdef HAL_TIM_MODULE_ENABLED
 292  #include "stm32f3xx_hal_tim.h"
 293 #endif /* HAL_TIM_MODULE_ENABLED */
 294
 295 #ifdef HAL_TSC_MODULE_ENABLED
 296  #include "stm32f3xx_hal_tsc.h"
 297 #endif /* HAL_TSC_MODULE_ENABLED */
 298
 299 #ifdef HAL_UART_MODULE_ENABLED
 300  #include "stm32f3xx_hal_uart.h"
 301 #endif /* HAL_UART_MODULE_ENABLED */
 302
 303 #ifdef HAL_USART_MODULE_ENABLED
 304  #include "stm32f3xx_hal_usart.h"
 305 #endif /* HAL_USART_MODULE_ENABLED */
 306
 307 #ifdef HAL_WWDG_MODULE_ENABLED
 308  #include "stm32f3xx_hal_wwdg.h"
 309 #endif /* HAL_WWDG_MODULE_ENABLED */
 310
 311 /* Exported macro ------------------------------------------------------------*/
 312 #ifdef  USE_FULL_ASSERT
 313 /**
 314   * @brief  The assert_param macro is used for function's parameters check.
 315   * @param  expr: If expr is false, it calls assert_failed function
 316   *         which reports the name of the source file and the source
 317   *         line number of the call that failed.
 318   *         If expr is true, it returns no value.
 319   * @retval None
 320   */
 321   #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 322 /* Exported functions ------------------------------------------------------- */
 323   void assert_failed(uint8_t* file, uint32_t line);
 324 #else
 325   #define assert_param(expr) ((void)0U)
 326 #endif /* USE_FULL_ASSERT */
 327
 328 #ifdef __cplusplus
 329 }
 330 #endif
 331
 332 #endif /* __STM32F3xx_HAL_CONF_H */
 333
 334
 335 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/