src/main/startup/stm32g4xx_hal_conf.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32g4xx_hal_conf.h
   4   * @author  MCD Application Team
   5   * @brief   HAL configuration template file.
   6   *          This file should be copied to the application folder and renamed
   7   *          to stm32g4xx_hal_conf.h.
   8   ******************************************************************************
   9   * @attention
  10   *
  11   * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
  12   * All rights reserved.</center></h2>
  13   *
  14   * This software component is licensed by ST under BSD 3-Clause license,
  15   * the "License"; You may not use this file except in compliance with the
  16   * License. You may obtain a copy of the License at:
  17   *                        opensource.org/licenses/BSD-3-Clause
  18   *
  19   ******************************************************************************
  20   */
  21
  22 /* Define to prevent recursive inclusion -------------------------------------*/
  23 #ifndef STM32G4xx_HAL_CONF_H
  24 #define STM32G4xx_HAL_CONF_H
  25
  26 #ifdef __cplusplus
  27 extern "C" {
  28 #endif
  29
  30 /* Exported types ------------------------------------------------------------*/
  31 /* Exported constants --------------------------------------------------------*/
  32
  33 /* ########################## Module Selection ############################## */
  34 /**
  35   * @brief This is the list of modules to be used in the HAL driver
  36   */
  37 #define HAL_MODULE_ENABLED
  38 #define HAL_ADC_MODULE_ENABLED
  39 //#define HAL_COMP_MODULE_ENABLED
  40 #define HAL_CORDIC_MODULE_ENABLED
  41 #define HAL_CORTEX_MODULE_ENABLED
  42 //#define HAL_CRC_MODULE_ENABLED
  43 //#define HAL_CRYP_MODULE_ENABLED
  44 //#define HAL_DAC_MODULE_ENABLED
  45 #define HAL_DMA_MODULE_ENABLED
  46 #define HAL_EXTI_MODULE_ENABLED
  47 #define HAL_FDCAN_MODULE_ENABLED
  48 #define HAL_FLASH_MODULE_ENABLED
  49 //#define HAL_FMAC_MODULE_ENABLED
  50 #define HAL_GPIO_MODULE_ENABLED
  51 //#define HAL_HRTIM_MODULE_ENABLED
  52 //#define HAL_IRDA_MODULE_ENABLED
  53 //#define HAL_IWDG_MODULE_ENABLED
  54 #define HAL_I2C_MODULE_ENABLED
  55 //#define HAL_I2S_MODULE_ENABLED
  56 #define HAL_LPTIM_MODULE_ENABLED
  57 //#define HAL_NAND_MODULE_ENABLED
  58 //#define HAL_NOR_MODULE_ENABLED
  59 //#define HAL_OPAMP_MODULE_ENABLED
  60 #define HAL_PCD_MODULE_ENABLED
  61 #define HAL_PWR_MODULE_ENABLED
  62 //#define HAL_QSPI_MODULE_ENABLED
  63 #define HAL_RCC_MODULE_ENABLED
  64 //#define HAL_RNG_MODULE_ENABLED
  65 #define HAL_RTC_MODULE_ENABLED
  66 //#define HAL_SAI_MODULE_ENABLED
  67 //#define HAL_SMARTCARD_MODULE_ENABLED
  68 //#define HAL_SMBUS_MODULE_ENABLED
  69 #define HAL_SPI_MODULE_ENABLED
  70 //#define HAL_SRAM_MODULE_ENABLED
  71 #define HAL_TIM_MODULE_ENABLED
  72 #define HAL_UART_MODULE_ENABLED
  73 #define HAL_USART_MODULE_ENABLED
  74 //#define HAL_WWDG_MODULE_ENABLED
  75
  76 /* ########################## Register Callbacks selection ############################## */
  77 /**
  78   * @brief This is the list of modules where register callback can be used
  79   */
  80
  81 #define USE_HAL_ADC_REGISTER_CALLBACKS        0U
  82 #define USE_HAL_COMP_REGISTER_CALLBACKS       0U
  83 #define USE_HAL_CORDIC_REGISTER_CALLBACKS     0U
  84 #define USE_HAL_CRYP_REGISTER_CALLBACKS       0U
  85 #define USE_HAL_DAC_REGISTER_CALLBACKS        0U
  86 #define USE_HAL_EXTI_REGISTER_CALLBACKS       0U
  87 #define USE_HAL_FDCAN_REGISTER_CALLBACKS      0U
  88 #define USE_HAL_FMAC_REGISTER_CALLBACKS       0U
  89 #define USE_HAL_HRTIM_REGISTER_CALLBACKS      0U
  90 #define USE_HAL_I2C_REGISTER_CALLBACKS        0U
  91 #define USE_HAL_I2S_REGISTER_CALLBACKS        0U
  92 #define USE_HAL_IRDA_REGISTER_CALLBACKS       0U
  93 #define USE_HAL_LPTIM_REGISTER_CALLBACKS      0U
  94 #define USE_HAL_NAND_REGISTER_CALLBACKS       0U
  95 #define USE_HAL_NOR_REGISTER_CALLBACKS        0U
  96 #define USE_HAL_OPAMP_REGISTER_CALLBACKS      0U
  97 #define USE_HAL_PCD_REGISTER_CALLBACKS        0U
  98 #define USE_HAL_QSPI_REGISTER_CALLBACKS       0U
  99 #define USE_HAL_RNG_REGISTER_CALLBACKS        0U
 100 #define USE_HAL_RTC_REGISTER_CALLBACKS        0U
 101 #define USE_HAL_SAI_REGISTER_CALLBACKS        0U
 102 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U
 103 #define USE_HAL_SMBUS_REGISTER_CALLBACKS      0U
 104 #define USE_HAL_SPI_REGISTER_CALLBACKS        0U
 105 #define USE_HAL_SRAM_REGISTER_CALLBACKS       0U
 106 #define USE_HAL_TIM_REGISTER_CALLBACKS        0U
 107 #define USE_HAL_UART_REGISTER_CALLBACKS       0U
 108 #define USE_HAL_USART_REGISTER_CALLBACKS      0U
 109 #define USE_HAL_WWDG_REGISTER_CALLBACKS       0U
 110
 111 /* ########################## Oscillator Values adaptation ####################*/
 112 /**
 113   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
 114   *        This value is used by the RCC HAL module to compute the system frequency
 115   *        (when HSE is used as system clock source, directly or through the PLL).
 116   */
 117 #if !defined  (HSE_VALUE)
 118 #define HSE_VALUE    (8000000UL) /*!< Value of the External oscillator in Hz */
 119 #endif /* HSE_VALUE */
 120
 121 #if !defined  (HSE_STARTUP_TIMEOUT)
 122 #define HSE_STARTUP_TIMEOUT    (100UL)   /*!< Time out for HSE start up, in ms */
 123 #endif /* HSE_STARTUP_TIMEOUT */
 124
 125 /**
 126   * @brief Internal High Speed oscillator (HSI) value.
 127   *        This value is used by the RCC HAL module to compute the system frequency
 128   *        (when HSI is used as system clock source, directly or through the PLL).
 129   */
 130 #if !defined  (HSI_VALUE)
 131 #define HSI_VALUE    (16000000UL) /*!< Value of the Internal oscillator in Hz*/
 132 #endif /* HSI_VALUE */
 133
 134 /**
 135   * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG.
 136   *        This internal oscillator is mainly dedicated to provide a high precision clock to
 137   *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
 138   *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
 139   *        which is subject to manufacturing process variations.
 140   */
 141 #if !defined  (HSI48_VALUE)
 142 #define HSI48_VALUE   (48000000UL) /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz.
 143                                           The real value my vary depending on manufacturing process variations.*/
 144 #endif /* HSI48_VALUE */
 145
 146 /**
 147   * @brief Internal Low Speed oscillator (LSI) value.
 148   */
 149 #if !defined  (LSI_VALUE)
 150 /*!< Value of the Internal Low Speed oscillator in Hz
 151 The real value may vary depending on the variations in voltage and temperature.*/
 152 #define LSI_VALUE  (32000UL)      /*!< LSI Typical Value in Hz*/
 153 #endif /* LSI_VALUE */
 154 /**
 155   * @brief External Low Speed oscillator (LSE) value.
 156   *        This value is used by the UART, RTC HAL module to compute the system frequency
 157   */
 158 #if !defined  (LSE_VALUE)
 159 #define LSE_VALUE    (32768UL) /*!< Value of the External oscillator in Hz*/
 160 #endif /* LSE_VALUE */
 161
 162 #if !defined  (LSE_STARTUP_TIMEOUT)
 163 #define LSE_STARTUP_TIMEOUT    (5000UL)  /*!< Time out for LSE start up, in ms */
 164 #endif /* LSE_STARTUP_TIMEOUT */
 165
 166 /**
 167   * @brief External clock source for I2S and SAI peripherals
 168   *        This value is used by the I2S and SAI HAL modules to compute the I2S and SAI clock source
 169   *        frequency, this source is inserted directly through I2S_CKIN pad.
 170   */
 171 #if !defined  (EXTERNAL_CLOCK_VALUE)
 172 #define EXTERNAL_CLOCK_VALUE    (48000UL) /*!< Value of the External clock source in Hz*/
 173 #endif /* EXTERNAL_CLOCK_VALUE */
 174
 175 /* Tip: To avoid modifying this file each time you need to use different HSE,
 176    ===  you can define the HSE value in your toolchain compiler preprocessor. */
 177
 178 /* ########################### System Configuration ######################### */
 179 /**
 180   * @brief This is the HAL system configuration section
 181   */
 182 #define  VDD_VALUE                    (3300UL) /*!< Value of VDD in mv */
 183 #define  TICK_INT_PRIORITY            (0x0FUL) /*!< tick interrupt priority */
 184 #define  USE_RTOS                     0U
 185 #define  PREFETCH_ENABLE              1U
 186 #define  INSTRUCTION_CACHE_ENABLE     1U
 187 #define  DATA_CACHE_ENABLE            1U
 188
 189 /* ########################## Assert Selection ############################## */
 190 /**
 191   * @brief Uncomment the line below to expanse the "assert_param" macro in the
 192   *        HAL drivers code
 193   */
 194 /* #define USE_FULL_ASSERT               1U */
 195
 196 /* ################## SPI peripheral configuration ########################## */
 197
 198 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
 199  * Activated: CRC code is present inside driver
 200  * Deactivated: CRC code cleaned from driver
 201  */
 202
 203 #define USE_SPI_CRC                   1U
 204
 205 /* Includes ------------------------------------------------------------------*/
 206 /**
 207   * @brief Include module's header file
 208   */
 209
 210 #ifdef HAL_RCC_MODULE_ENABLED
 211 #include "stm32g4xx_hal_rcc.h"
 212 #endif /* HAL_RCC_MODULE_ENABLED */
 213
 214 #ifdef HAL_GPIO_MODULE_ENABLED
 215 #include "stm32g4xx_hal_gpio.h"
 216 #endif /* HAL_GPIO_MODULE_ENABLED */
 217
 218 #ifdef HAL_DMA_MODULE_ENABLED
 219 #include "stm32g4xx_hal_dma.h"
 220 #endif /* HAL_DMA_MODULE_ENABLED */
 221
 222 #ifdef HAL_CORTEX_MODULE_ENABLED
 223 #include "stm32g4xx_hal_cortex.h"
 224 #endif /* HAL_CORTEX_MODULE_ENABLED */
 225
 226 #ifdef HAL_ADC_MODULE_ENABLED
 227 #include "stm32g4xx_hal_adc.h"
 228 #endif /* HAL_ADC_MODULE_ENABLED */
 229
 230 #ifdef HAL_COMP_MODULE_ENABLED
 231 #include "stm32g4xx_hal_comp.h"
 232 #endif /* HAL_COMP_MODULE_ENABLED */
 233
 234 #ifdef HAL_CORDIC_MODULE_ENABLED
 235 #include "stm32g4xx_hal_cordic.h"
 236 #endif /* HAL_CORDIC_MODULE_ENABLED */
 237
 238 #ifdef HAL_CRC_MODULE_ENABLED
 239 #include "stm32g4xx_hal_crc.h"
 240 #endif /* HAL_CRC_MODULE_ENABLED */
 241
 242 #ifdef HAL_CRYP_MODULE_ENABLED
 243 #include "stm32g4xx_hal_cryp.h"
 244 #endif /* HAL_CRYP_MODULE_ENABLED */
 245
 246 #ifdef HAL_DAC_MODULE_ENABLED
 247 #include "stm32g4xx_hal_dac.h"
 248 #endif /* HAL_DAC_MODULE_ENABLED */
 249
 250 #ifdef HAL_EXTI_MODULE_ENABLED
 251 #include "stm32g4xx_hal_exti.h"
 252 #endif /* HAL_EXTI_MODULE_ENABLED */
 253
 254 #ifdef HAL_FDCAN_MODULE_ENABLED
 255 #include "stm32g4xx_hal_fdcan.h"
 256 #endif /* HAL_FDCAN_MODULE_ENABLED */
 257
 258 #ifdef HAL_FLASH_MODULE_ENABLED
 259 #include "stm32g4xx_hal_flash.h"
 260 #endif /* HAL_FLASH_MODULE_ENABLED */
 261
 262 #ifdef HAL_FMAC_MODULE_ENABLED
 263 #include "stm32g4xx_hal_fmac.h"
 264 #endif /* HAL_FMAC_MODULE_ENABLED */
 265
 266 #ifdef HAL_HRTIM_MODULE_ENABLED
 267 #include "stm32g4xx_hal_hrtim.h"
 268 #endif /* HAL_HRTIM_MODULE_ENABLED */
 269
 270 #ifdef HAL_IRDA_MODULE_ENABLED
 271 #include "stm32g4xx_hal_irda.h"
 272 #endif /* HAL_IRDA_MODULE_ENABLED */
 273
 274 #ifdef HAL_IWDG_MODULE_ENABLED
 275 #include "stm32g4xx_hal_iwdg.h"
 276 #endif /* HAL_IWDG_MODULE_ENABLED */
 277
 278 #ifdef HAL_I2C_MODULE_ENABLED
 279 #include "stm32g4xx_hal_i2c.h"
 280 #endif /* HAL_I2C_MODULE_ENABLED */
 281
 282 #ifdef HAL_I2S_MODULE_ENABLED
 283 #include "stm32g4xx_hal_i2s.h"
 284 #endif /* HAL_I2S_MODULE_ENABLED */
 285
 286 #ifdef HAL_LPTIM_MODULE_ENABLED
 287 #include "stm32g4xx_hal_lptim.h"
 288 #endif /* HAL_LPTIM_MODULE_ENABLED */
 289
 290 #ifdef HAL_NAND_MODULE_ENABLED
 291 #include "stm32g4xx_hal_nand.h"
 292 #endif /* HAL_NAND_MODULE_ENABLED */
 293
 294 #ifdef HAL_NOR_MODULE_ENABLED
 295 #include "stm32g4xx_hal_nor.h"
 296 #endif /* HAL_NOR_MODULE_ENABLED */
 297
 298 #ifdef HAL_OPAMP_MODULE_ENABLED
 299 #include "stm32g4xx_hal_opamp.h"
 300 #endif /* HAL_OPAMP_MODULE_ENABLED */
 301
 302 #ifdef HAL_PCD_MODULE_ENABLED
 303 #include "stm32g4xx_hal_pcd.h"
 304 #endif /* HAL_PCD_MODULE_ENABLED */
 305
 306 #ifdef HAL_PWR_MODULE_ENABLED
 307 #include "stm32g4xx_hal_pwr.h"
 308 #endif /* HAL_PWR_MODULE_ENABLED */
 309
 310 #ifdef HAL_QSPI_MODULE_ENABLED
 311 #include "stm32g4xx_hal_qspi.h"
 312 #endif /* HAL_QSPI_MODULE_ENABLED */
 313
 314 #ifdef HAL_RNG_MODULE_ENABLED
 315 #include "stm32g4xx_hal_rng.h"
 316 #endif /* HAL_RNG_MODULE_ENABLED */
 317
 318 #ifdef HAL_RTC_MODULE_ENABLED
 319 #include "stm32g4xx_hal_rtc.h"
 320 #endif /* HAL_RTC_MODULE_ENABLED */
 321
 322 #ifdef HAL_SAI_MODULE_ENABLED
 323 #include "stm32g4xx_hal_sai.h"
 324 #endif /* HAL_SAI_MODULE_ENABLED */
 325
 326 #ifdef HAL_SMARTCARD_MODULE_ENABLED
 327 #include "stm32g4xx_hal_smartcard.h"
 328 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
 329
 330 #ifdef HAL_SMBUS_MODULE_ENABLED
 331 #include "stm32g4xx_hal_smbus.h"
 332 #endif /* HAL_SMBUS_MODULE_ENABLED */
 333
 334 #ifdef HAL_SPI_MODULE_ENABLED
 335 #include "stm32g4xx_hal_spi.h"
 336 #endif /* HAL_SPI_MODULE_ENABLED */
 337
 338 #ifdef HAL_SRAM_MODULE_ENABLED
 339 #include "stm32g4xx_hal_sram.h"
 340 #endif /* HAL_SRAM_MODULE_ENABLED */
 341
 342 #ifdef HAL_TIM_MODULE_ENABLED
 343 #include "stm32g4xx_hal_tim.h"
 344 #endif /* HAL_TIM_MODULE_ENABLED */
 345
 346 #ifdef HAL_UART_MODULE_ENABLED
 347 #include "stm32g4xx_hal_uart.h"
 348 #endif /* HAL_UART_MODULE_ENABLED */
 349
 350 #ifdef HAL_USART_MODULE_ENABLED
 351 #include "stm32g4xx_hal_usart.h"
 352 #endif /* HAL_USART_MODULE_ENABLED */
 353
 354 #ifdef HAL_WWDG_MODULE_ENABLED
 355 #include "stm32g4xx_hal_wwdg.h"
 356 #endif /* HAL_WWDG_MODULE_ENABLED */
 357
 358 /* Exported macro ------------------------------------------------------------*/
 359 #ifdef  USE_FULL_ASSERT
 360 /**
 361   * @brief  The assert_param macro is used for function's parameters check.
 362   * @param  expr: If expr is false, it calls assert_failed function
 363   *         which reports the name of the source file and the source
 364   *         line number of the call that failed.
 365   *         If expr is true, it returns no value.
 366   * @retval None
 367   */
 368 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 369 /* Exported functions ------------------------------------------------------- */
 370 void assert_failed(uint8_t *file, uint32_t line);
 371 #else
 372 #define assert_param(expr) ((void)0U)
 373 #endif /* USE_FULL_ASSERT */
 374
 375 #ifdef __cplusplus
 376 }
 377 #endif
 378
 379 #endif /* STM32G4xx_HAL_CONF_H */
 380
 381
 382 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/