Merge pull request #11270 from haslinghuis/rename_attr
[betaflight.git] / lib / main / CMSIS / Core / Include / core_cm0plus.h
blobf8f30c3496a16d62409066e4ded26c404e7ae813
1 /**************************************************************************//**
2 * @file core_cm0plus.h
3 * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
4 * @version V5.0.4
5 * @date 10. January 2018
6 ******************************************************************************/
7 /*
8 * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
10 * SPDX-License-Identifier: Apache-2.0
12 * Licensed under the Apache License, Version 2.0 (the License); you may
13 * not use this file except in compliance with the License.
14 * You may obtain a copy of the License at
16 * www.apache.org/licenses/LICENSE-2.0
18 * Unless required by applicable law or agreed to in writing, software
19 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
20 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
21 * See the License for the specific language governing permissions and
22 * limitations under the License.
25 #if defined ( __ICCARM__ )
26 #pragma system_include /* treat file as system include file for MISRA check */
27 #elif defined (__clang__)
28 #pragma clang system_header /* treat file as system include file */
29 #endif
31 #ifndef __CORE_CM0PLUS_H_GENERIC
32 #define __CORE_CM0PLUS_H_GENERIC
34 #include <stdint.h>
36 #ifdef __cplusplus
37 extern "C" {
38 #endif
40 /**
41 \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
42 CMSIS violates the following MISRA-C:2004 rules:
44 \li Required Rule 8.5, object/function definition in header file.<br>
45 Function definitions in header files are used to allow 'inlining'.
47 \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
48 Unions are used for effective representation of core registers.
50 \li Advisory Rule 19.7, Function-like macro defined.<br>
51 Function-like macros are used to allow more efficient code.
55 /*******************************************************************************
56 * CMSIS definitions
57 ******************************************************************************/
58 /**
59 \ingroup Cortex-M0+
63 #include "cmsis_version.h"
65 /* CMSIS CM0+ definitions */
66 #define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
67 #define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
68 #define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \
69 __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
71 #define __CORTEX_M (0U) /*!< Cortex-M Core */
73 /** __FPU_USED indicates whether an FPU is used or not.
74 This core does not support an FPU at all
76 #define __FPU_USED 0U
78 #if defined ( __CC_ARM )
79 #if defined __TARGET_FPU_VFP
80 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
81 #endif
83 #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
84 #if defined __ARM_PCS_VFP
85 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
86 #endif
88 #elif defined ( __GNUC__ )
89 #if defined (__VFP_FP__) && !defined(__SOFTFP__)
90 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
91 #endif
93 #elif defined ( __ICCARM__ )
94 #if defined __ARMVFP__
95 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
96 #endif
98 #elif defined ( __TI_ARM__ )
99 #if defined __TI_VFP_SUPPORT__
100 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
101 #endif
103 #elif defined ( __TASKING__ )
104 #if defined __FPU_VFP__
105 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
106 #endif
108 #elif defined ( __CSMC__ )
109 #if ( __CSMC__ & 0x400U)
110 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
111 #endif
113 #endif
115 #include "cmsis_compiler.h" /* CMSIS compiler specific defines */
118 #ifdef __cplusplus
120 #endif
122 #endif /* __CORE_CM0PLUS_H_GENERIC */
124 #ifndef __CMSIS_GENERIC
126 #ifndef __CORE_CM0PLUS_H_DEPENDANT
127 #define __CORE_CM0PLUS_H_DEPENDANT
129 #ifdef __cplusplus
130 extern "C" {
131 #endif
133 /* check device defines and use defaults */
134 #if defined __CHECK_DEVICE_DEFINES
135 #ifndef __CM0PLUS_REV
136 #define __CM0PLUS_REV 0x0000U
137 #warning "__CM0PLUS_REV not defined in device header file; using default!"
138 #endif
140 #ifndef __MPU_PRESENT
141 #define __MPU_PRESENT 0U
142 #warning "__MPU_PRESENT not defined in device header file; using default!"
143 #endif
145 #ifndef __VTOR_PRESENT
146 #define __VTOR_PRESENT 0U
147 #warning "__VTOR_PRESENT not defined in device header file; using default!"
148 #endif
150 #ifndef __NVIC_PRIO_BITS
151 #define __NVIC_PRIO_BITS 2U
152 #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
153 #endif
155 #ifndef __Vendor_SysTickConfig
156 #define __Vendor_SysTickConfig 0U
157 #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
158 #endif
159 #endif
161 /* IO definitions (access restrictions to peripheral registers) */
163 \defgroup CMSIS_glob_defs CMSIS Global Defines
165 <strong>IO Type Qualifiers</strong> are used
166 \li to specify the access to peripheral variables.
167 \li for automatic generation of peripheral register debug information.
169 #ifdef __cplusplus
170 #define __I volatile /*!< Defines 'read only' permissions */
171 #else
172 #define __I volatile const /*!< Defines 'read only' permissions */
173 #endif
174 #define __O volatile /*!< Defines 'write only' permissions */
175 #define __IO volatile /*!< Defines 'read / write' permissions */
177 /* following defines should be used for structure members */
178 #define __IM volatile const /*! Defines 'read only' structure member permissions */
179 #define __OM volatile /*! Defines 'write only' structure member permissions */
180 #define __IOM volatile /*! Defines 'read / write' structure member permissions */
182 /*@} end of group Cortex-M0+ */
186 /*******************************************************************************
187 * Register Abstraction
188 Core Register contain:
189 - Core Register
190 - Core NVIC Register
191 - Core SCB Register
192 - Core SysTick Register
193 - Core MPU Register
194 ******************************************************************************/
196 \defgroup CMSIS_core_register Defines and Type Definitions
197 \brief Type definitions and defines for Cortex-M processor based devices.
201 \ingroup CMSIS_core_register
202 \defgroup CMSIS_CORE Status and Control Registers
203 \brief Core Register type definitions.
208 \brief Union type to access the Application Program Status Register (APSR).
210 typedef union
212 struct
214 uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
215 uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
216 uint32_t C:1; /*!< bit: 29 Carry condition code flag */
217 uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
218 uint32_t N:1; /*!< bit: 31 Negative condition code flag */
219 } b; /*!< Structure used for bit access */
220 uint32_t w; /*!< Type used for word access */
221 } APSR_Type;
223 /* APSR Register Definitions */
224 #define APSR_N_Pos 31U /*!< APSR: N Position */
225 #define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
227 #define APSR_Z_Pos 30U /*!< APSR: Z Position */
228 #define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
230 #define APSR_C_Pos 29U /*!< APSR: C Position */
231 #define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
233 #define APSR_V_Pos 28U /*!< APSR: V Position */
234 #define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
238 \brief Union type to access the Interrupt Program Status Register (IPSR).
240 typedef union
242 struct
244 uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
245 uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
246 } b; /*!< Structure used for bit access */
247 uint32_t w; /*!< Type used for word access */
248 } IPSR_Type;
250 /* IPSR Register Definitions */
251 #define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
252 #define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
256 \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
258 typedef union
260 struct
262 uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
263 uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
264 uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
265 uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
266 uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
267 uint32_t C:1; /*!< bit: 29 Carry condition code flag */
268 uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
269 uint32_t N:1; /*!< bit: 31 Negative condition code flag */
270 } b; /*!< Structure used for bit access */
271 uint32_t w; /*!< Type used for word access */
272 } xPSR_Type;
274 /* xPSR Register Definitions */
275 #define xPSR_N_Pos 31U /*!< xPSR: N Position */
276 #define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
278 #define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
279 #define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
281 #define xPSR_C_Pos 29U /*!< xPSR: C Position */
282 #define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
284 #define xPSR_V_Pos 28U /*!< xPSR: V Position */
285 #define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
287 #define xPSR_T_Pos 24U /*!< xPSR: T Position */
288 #define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
290 #define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
291 #define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
295 \brief Union type to access the Control Registers (CONTROL).
297 typedef union
299 struct
301 uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
302 uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
303 uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
304 } b; /*!< Structure used for bit access */
305 uint32_t w; /*!< Type used for word access */
306 } CONTROL_Type;
308 /* CONTROL Register Definitions */
309 #define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
310 #define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
312 #define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
313 #define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
315 /*@} end of group CMSIS_CORE */
319 \ingroup CMSIS_core_register
320 \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
321 \brief Type definitions for the NVIC Registers
326 \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
328 typedef struct
330 __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
331 uint32_t RESERVED0[31U];
332 __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
333 uint32_t RSERVED1[31U];
334 __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
335 uint32_t RESERVED2[31U];
336 __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
337 uint32_t RESERVED3[31U];
338 uint32_t RESERVED4[64U];
339 __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
340 } NVIC_Type;
342 /*@} end of group CMSIS_NVIC */
346 \ingroup CMSIS_core_register
347 \defgroup CMSIS_SCB System Control Block (SCB)
348 \brief Type definitions for the System Control Block Registers
353 \brief Structure type to access the System Control Block (SCB).
355 typedef struct
357 __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
358 __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
359 #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
360 __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
361 #else
362 uint32_t RESERVED0;
363 #endif
364 __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
365 __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
366 __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
367 uint32_t RESERVED1;
368 __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
369 __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
370 } SCB_Type;
372 /* SCB CPUID Register Definitions */
373 #define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
374 #define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
376 #define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
377 #define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
379 #define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
380 #define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
382 #define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
383 #define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
385 #define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
386 #define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
388 /* SCB Interrupt Control State Register Definitions */
389 #define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
390 #define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
392 #define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
393 #define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
395 #define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
396 #define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
398 #define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
399 #define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
401 #define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
402 #define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
404 #define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
405 #define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
407 #define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
408 #define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
410 #define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
411 #define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
413 #define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
414 #define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
416 #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
417 /* SCB Interrupt Control State Register Definitions */
418 #define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */
419 #define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
420 #endif
422 /* SCB Application Interrupt and Reset Control Register Definitions */
423 #define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
424 #define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
426 #define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
427 #define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
429 #define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
430 #define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
432 #define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
433 #define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
435 #define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
436 #define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
438 /* SCB System Control Register Definitions */
439 #define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
440 #define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
442 #define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
443 #define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
445 #define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
446 #define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
448 /* SCB Configuration Control Register Definitions */
449 #define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
450 #define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
452 #define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
453 #define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
455 /* SCB System Handler Control and State Register Definitions */
456 #define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
457 #define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
459 /*@} end of group CMSIS_SCB */
463 \ingroup CMSIS_core_register
464 \defgroup CMSIS_SysTick System Tick Timer (SysTick)
465 \brief Type definitions for the System Timer Registers.
470 \brief Structure type to access the System Timer (SysTick).
472 typedef struct
474 __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
475 __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
476 __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
477 __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
478 } SysTick_Type;
480 /* SysTick Control / Status Register Definitions */
481 #define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
482 #define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
484 #define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
485 #define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
487 #define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
488 #define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
490 #define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
491 #define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
493 /* SysTick Reload Register Definitions */
494 #define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
495 #define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
497 /* SysTick Current Register Definitions */
498 #define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
499 #define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
501 /* SysTick Calibration Register Definitions */
502 #define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
503 #define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
505 #define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
506 #define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
508 #define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
509 #define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
511 /*@} end of group CMSIS_SysTick */
513 #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
515 \ingroup CMSIS_core_register
516 \defgroup CMSIS_MPU Memory Protection Unit (MPU)
517 \brief Type definitions for the Memory Protection Unit (MPU)
522 \brief Structure type to access the Memory Protection Unit (MPU).
524 typedef struct
526 __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
527 __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
528 __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
529 __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
530 __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
531 } MPU_Type;
533 #define MPU_TYPE_RALIASES 1U
535 /* MPU Type Register Definitions */
536 #define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
537 #define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
539 #define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
540 #define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
542 #define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
543 #define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
545 /* MPU Control Register Definitions */
546 #define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
547 #define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
549 #define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
550 #define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
552 #define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
553 #define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
555 /* MPU Region Number Register Definitions */
556 #define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
557 #define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
559 /* MPU Region Base Address Register Definitions */
560 #define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
561 #define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
563 #define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
564 #define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
566 #define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
567 #define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
569 /* MPU Region Attribute and Size Register Definitions */
570 #define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
571 #define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
573 #define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
574 #define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
576 #define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
577 #define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
579 #define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
580 #define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
582 #define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
583 #define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
585 #define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
586 #define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
588 #define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
589 #define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
591 #define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
592 #define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
594 #define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
595 #define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
597 #define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
598 #define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
600 /*@} end of group CMSIS_MPU */
601 #endif
605 \ingroup CMSIS_core_register
606 \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
607 \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
608 Therefore they are not covered by the Cortex-M0+ header file.
611 /*@} end of group CMSIS_CoreDebug */
615 \ingroup CMSIS_core_register
616 \defgroup CMSIS_core_bitfield Core register bit field macros
617 \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
622 \brief Mask and shift a bit field value for use in a register bit range.
623 \param[in] field Name of the register bit field.
624 \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
625 \return Masked and shifted value.
627 #define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
630 \brief Mask and shift a register value to extract a bit filed value.
631 \param[in] field Name of the register bit field.
632 \param[in] value Value of register. This parameter is interpreted as an uint32_t type.
633 \return Masked and shifted bit field value.
635 #define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
637 /*@} end of group CMSIS_core_bitfield */
641 \ingroup CMSIS_core_register
642 \defgroup CMSIS_core_base Core Definitions
643 \brief Definitions for base addresses, unions, and structures.
647 /* Memory mapping of Core Hardware */
648 #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
649 #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
650 #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
651 #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
653 #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
654 #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
655 #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
657 #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
658 #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
659 #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
660 #endif
662 /*@} */
666 /*******************************************************************************
667 * Hardware Abstraction Layer
668 Core Function Interface contains:
669 - Core NVIC Functions
670 - Core SysTick Functions
671 - Core Register Access Functions
672 ******************************************************************************/
674 \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
679 /* ########################## NVIC functions #################################### */
681 \ingroup CMSIS_Core_FunctionInterface
682 \defgroup CMSIS_Core_NVICFunctions NVIC Functions
683 \brief Functions that manage interrupts and exceptions via the NVIC.
687 #ifdef CMSIS_NVIC_VIRTUAL
688 #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
689 #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
690 #endif
691 #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
692 #else
693 /*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M0+ */
694 /*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M0+ */
695 #define NVIC_EnableIRQ __NVIC_EnableIRQ
696 #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
697 #define NVIC_DisableIRQ __NVIC_DisableIRQ
698 #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
699 #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
700 #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
701 /*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */
702 #define NVIC_SetPriority __NVIC_SetPriority
703 #define NVIC_GetPriority __NVIC_GetPriority
704 #define NVIC_SystemReset __NVIC_SystemReset
705 #endif /* CMSIS_NVIC_VIRTUAL */
707 #ifdef CMSIS_VECTAB_VIRTUAL
708 #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
709 #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
710 #endif
711 #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
712 #else
713 #define NVIC_SetVector __NVIC_SetVector
714 #define NVIC_GetVector __NVIC_GetVector
715 #endif /* (CMSIS_VECTAB_VIRTUAL) */
717 #define NVIC_USER_IRQ_OFFSET 16
720 /* Interrupt Priorities are WORD accessible only under Armv6-M */
721 /* The following MACROS handle generation of the register offset and byte masks */
722 #define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
723 #define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
724 #define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
728 \brief Enable Interrupt
729 \details Enables a device specific interrupt in the NVIC interrupt controller.
730 \param [in] IRQn Device specific interrupt number.
731 \note IRQn must not be negative.
733 __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
735 if ((int32_t)(IRQn) >= 0)
737 NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
743 \brief Get Interrupt Enable status
744 \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
745 \param [in] IRQn Device specific interrupt number.
746 \return 0 Interrupt is not enabled.
747 \return 1 Interrupt is enabled.
748 \note IRQn must not be negative.
750 __STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
752 if ((int32_t)(IRQn) >= 0)
754 return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
756 else
758 return(0U);
764 \brief Disable Interrupt
765 \details Disables a device specific interrupt in the NVIC interrupt controller.
766 \param [in] IRQn Device specific interrupt number.
767 \note IRQn must not be negative.
769 __STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
771 if ((int32_t)(IRQn) >= 0)
773 NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
774 __DSB();
775 __ISB();
781 \brief Get Pending Interrupt
782 \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
783 \param [in] IRQn Device specific interrupt number.
784 \return 0 Interrupt status is not pending.
785 \return 1 Interrupt status is pending.
786 \note IRQn must not be negative.
788 __STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
790 if ((int32_t)(IRQn) >= 0)
792 return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
794 else
796 return(0U);
802 \brief Set Pending Interrupt
803 \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
804 \param [in] IRQn Device specific interrupt number.
805 \note IRQn must not be negative.
807 __STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
809 if ((int32_t)(IRQn) >= 0)
811 NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
817 \brief Clear Pending Interrupt
818 \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
819 \param [in] IRQn Device specific interrupt number.
820 \note IRQn must not be negative.
822 __STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
824 if ((int32_t)(IRQn) >= 0)
826 NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
832 \brief Set Interrupt Priority
833 \details Sets the priority of a device specific interrupt or a processor exception.
834 The interrupt number can be positive to specify a device specific interrupt,
835 or negative to specify a processor exception.
836 \param [in] IRQn Interrupt number.
837 \param [in] priority Priority to set.
838 \note The priority cannot be set for every processor exception.
840 __STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
842 if ((int32_t)(IRQn) >= 0)
844 NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
845 (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
847 else
849 SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
850 (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
856 \brief Get Interrupt Priority
857 \details Reads the priority of a device specific interrupt or a processor exception.
858 The interrupt number can be positive to specify a device specific interrupt,
859 or negative to specify a processor exception.
860 \param [in] IRQn Interrupt number.
861 \return Interrupt Priority.
862 Value is aligned automatically to the implemented priority bits of the microcontroller.
864 __STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
867 if ((int32_t)(IRQn) >= 0)
869 return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
871 else
873 return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
879 \brief Set Interrupt Vector
880 \details Sets an interrupt vector in SRAM based interrupt vector table.
881 The interrupt number can be positive to specify a device specific interrupt,
882 or negative to specify a processor exception.
883 VTOR must been relocated to SRAM before.
884 If VTOR is not present address 0 must be mapped to SRAM.
885 \param [in] IRQn Interrupt number
886 \param [in] vector Address of interrupt handler function
888 __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
890 #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
891 uint32_t *vectors = (uint32_t *)SCB->VTOR;
892 #else
893 uint32_t *vectors = (uint32_t *)0x0U;
894 #endif
895 vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
900 \brief Get Interrupt Vector
901 \details Reads an interrupt vector from interrupt vector table.
902 The interrupt number can be positive to specify a device specific interrupt,
903 or negative to specify a processor exception.
904 \param [in] IRQn Interrupt number.
905 \return Address of interrupt handler function
907 __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
909 #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
910 uint32_t *vectors = (uint32_t *)SCB->VTOR;
911 #else
912 uint32_t *vectors = (uint32_t *)0x0U;
913 #endif
914 return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
920 \brief System Reset
921 \details Initiates a system reset request to reset the MCU.
923 __STATIC_INLINE void __NVIC_SystemReset(void)
925 __DSB(); /* Ensure all outstanding memory accesses included
926 buffered write are completed before reset */
927 SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
928 SCB_AIRCR_SYSRESETREQ_Msk);
929 __DSB(); /* Ensure completion of memory access */
931 for(;;) /* wait until reset */
933 __NOP();
937 /*@} end of CMSIS_Core_NVICFunctions */
939 /* ########################## MPU functions #################################### */
941 #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
943 #include "mpu_armv7.h"
945 #endif
947 /* ########################## FPU functions #################################### */
949 \ingroup CMSIS_Core_FunctionInterface
950 \defgroup CMSIS_Core_FpuFunctions FPU Functions
951 \brief Function that provides FPU type.
956 \brief get FPU type
957 \details returns the FPU type
958 \returns
959 - \b 0: No FPU
960 - \b 1: Single precision FPU
961 - \b 2: Double + Single precision FPU
963 __STATIC_INLINE uint32_t SCB_GetFPUType(void)
965 return 0U; /* No FPU */
969 /*@} end of CMSIS_Core_FpuFunctions */
973 /* ################################## SysTick function ############################################ */
975 \ingroup CMSIS_Core_FunctionInterface
976 \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
977 \brief Functions that configure the System.
981 #if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
984 \brief System Tick Configuration
985 \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
986 Counter is in free running mode to generate periodic interrupts.
987 \param [in] ticks Number of ticks between two interrupts.
988 \return 0 Function succeeded.
989 \return 1 Function failed.
990 \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
991 function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
992 must contain a vendor-specific implementation of this function.
994 __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
996 if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
998 return (1UL); /* Reload value impossible */
1001 SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
1002 NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
1003 SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
1004 SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
1005 SysTick_CTRL_TICKINT_Msk |
1006 SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
1007 return (0UL); /* Function successful */
1010 #endif
1012 /*@} end of CMSIS_Core_SysTickFunctions */
1017 #ifdef __cplusplus
1019 #endif
1021 #endif /* __CORE_CM0PLUS_H_DEPENDANT */
1023 #endif /* __CMSIS_GENERIC */