lib/main/STM32H7/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_smbus.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32h7xx_hal_smbus.h
   4   * @author  MCD Application Team
   5   * @brief   Header file of SMBUS HAL module.
   6   ******************************************************************************
   7   * @attention
   8   *
   9   * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
  10   * All rights reserved.</center></h2>
  11   *
  12   * This software component is licensed by ST under BSD 3-Clause license,
  13   * the "License"; You may not use this file except in compliance with the
  14   * License. You may obtain a copy of the License at:
  15   *                        opensource.org/licenses/BSD-3-Clause
  16   *
  17   ******************************************************************************
  18   */
  19
  20 /* Define to prevent recursive inclusion -------------------------------------*/
  21 #ifndef STM32H7xx_HAL_SMBUS_H
  22 #define STM32H7xx_HAL_SMBUS_H
  23
  24 #ifdef __cplusplus
  25 extern "C" {
  26 #endif
  27
  28 /* Includes ------------------------------------------------------------------*/
  29 #include "stm32h7xx_hal_def.h"
  30
  31 /** @addtogroup STM32H7xx_HAL_Driver
  32   * @{
  33   */
  34
  35 /** @addtogroup SMBUS
  36   * @{
  37   */
  38
  39 /* Exported types ------------------------------------------------------------*/
  40 /** @defgroup SMBUS_Exported_Types SMBUS Exported Types
  41   * @{
  42   */
  43
  44 /** @defgroup SMBUS_Configuration_Structure_definition SMBUS Configuration Structure definition
  45   * @brief  SMBUS Configuration Structure definition
  46   * @{
  47   */
  48 typedef struct
  49 {
  50   uint32_t Timing;                 /*!< Specifies the SMBUS_TIMINGR_register value.
  51                                      This parameter calculated by referring to SMBUS initialization
  52                                             section in Reference manual */
  53   uint32_t AnalogFilter;           /*!< Specifies if Analog Filter is enable or not.
  54                                      This parameter can be a value of @ref SMBUS_Analog_Filter */
  55
  56   uint32_t OwnAddress1;            /*!< Specifies the first device own address.
  57                                      This parameter can be a 7-bit or 10-bit address. */
  58
  59   uint32_t AddressingMode;         /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected.
  60                                      This parameter can be a value of @ref SMBUS_addressing_mode */
  61
  62   uint32_t DualAddressMode;        /*!< Specifies if dual addressing mode is selected.
  63                                      This parameter can be a value of @ref SMBUS_dual_addressing_mode */
  64
  65   uint32_t OwnAddress2;            /*!< Specifies the second device own address if dual addressing mode is selected
  66                                      This parameter can be a 7-bit address. */
  67
  68   uint32_t OwnAddress2Masks;       /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
  69                                      This parameter can be a value of @ref SMBUS_own_address2_masks. */
  70
  71   uint32_t GeneralCallMode;        /*!< Specifies if general call mode is selected.
  72                                      This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */
  73
  74   uint32_t NoStretchMode;          /*!< Specifies if nostretch mode is selected.
  75                                      This parameter can be a value of @ref SMBUS_nostretch_mode */
  76
  77   uint32_t PacketErrorCheckMode;   /*!< Specifies if Packet Error Check mode is selected.
  78                                      This parameter can be a value of @ref SMBUS_packet_error_check_mode */
  79
  80   uint32_t PeripheralMode;         /*!< Specifies which mode of Periphal is selected.
  81                                      This parameter can be a value of @ref SMBUS_peripheral_mode */
  82
  83   uint32_t SMBusTimeout;           /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value.
  84                                       (Enable bits and different timeout values)
  85                                      This parameter calculated by referring to SMBUS initialization
  86                                          section in Reference manual */
  87 } SMBUS_InitTypeDef;
  88 /**
  89   * @}
  90   */
  91
  92 /** @defgroup HAL_state_definition HAL state definition
  93   * @brief  HAL State definition
  94   * @{
  95   */
  96 #define HAL_SMBUS_STATE_RESET           (0x00000000U)  /*!< SMBUS not yet initialized or disabled         */
  97 #define HAL_SMBUS_STATE_READY           (0x00000001U)  /*!< SMBUS initialized and ready for use           */
  98 #define HAL_SMBUS_STATE_BUSY            (0x00000002U)  /*!< SMBUS internal process is ongoing             */
  99 #define HAL_SMBUS_STATE_MASTER_BUSY_TX  (0x00000012U)  /*!< Master Data Transmission process is ongoing   */
 100 #define HAL_SMBUS_STATE_MASTER_BUSY_RX  (0x00000022U)  /*!< Master Data Reception process is ongoing      */
 101 #define HAL_SMBUS_STATE_SLAVE_BUSY_TX   (0x00000032U)  /*!< Slave Data Transmission process is ongoing    */
 102 #define HAL_SMBUS_STATE_SLAVE_BUSY_RX   (0x00000042U)  /*!< Slave Data Reception process is ongoing       */
 103 #define HAL_SMBUS_STATE_TIMEOUT         (0x00000003U)  /*!< Timeout state                                 */
 104 #define HAL_SMBUS_STATE_ERROR           (0x00000004U)  /*!< Reception process is ongoing                  */
 105 #define HAL_SMBUS_STATE_LISTEN          (0x00000008U)   /*!< Address Listen Mode is ongoing                */
 106 /**
 107   * @}
 108   */
 109
 110 /** @defgroup SMBUS_Error_Code_definition SMBUS Error Code definition
 111   * @brief  SMBUS Error Code definition
 112   * @{
 113   */
 114 #define HAL_SMBUS_ERROR_NONE            (0x00000000U)    /*!< No error             */
 115 #define HAL_SMBUS_ERROR_BERR            (0x00000001U)    /*!< BERR error           */
 116 #define HAL_SMBUS_ERROR_ARLO            (0x00000002U)    /*!< ARLO error           */
 117 #define HAL_SMBUS_ERROR_ACKF            (0x00000004U)    /*!< ACKF error           */
 118 #define HAL_SMBUS_ERROR_OVR             (0x00000008U)    /*!< OVR error            */
 119 #define HAL_SMBUS_ERROR_HALTIMEOUT      (0x00000010U)    /*!< Timeout error        */
 120 #define HAL_SMBUS_ERROR_BUSTIMEOUT      (0x00000020U)    /*!< Bus Timeout error    */
 121 #define HAL_SMBUS_ERROR_ALERT           (0x00000040U)    /*!< Alert error          */
 122 #define HAL_SMBUS_ERROR_PECERR          (0x00000080U)    /*!< PEC error            */
 123 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
 124 #define HAL_SMBUS_ERROR_INVALID_CALLBACK  (0x00000100U)    /*!< Invalid Callback error */
 125 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
 126 #define HAL_SMBUS_ERROR_INVALID_PARAM    (0x00000200U)   /*!< Invalid Parameters error */
 127 /**
 128   * @}
 129   */
 130
 131 /** @defgroup SMBUS_handle_Structure_definition SMBUS handle Structure definition
 132   * @brief  SMBUS handle Structure definition
 133   * @{
 134   */
 135 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
 136 typedef struct __SMBUS_HandleTypeDef
 137 #else
 138 typedef struct
 139 #endif  /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
 140 {
 141   I2C_TypeDef                  *Instance;       /*!< SMBUS registers base address       */
 142
 143   SMBUS_InitTypeDef            Init;            /*!< SMBUS communication parameters     */
 144
 145   uint8_t                      *pBuffPtr;       /*!< Pointer to SMBUS transfer buffer   */
 146
 147   uint16_t                     XferSize;        /*!< SMBUS transfer size                */
 148
 149   __IO uint16_t                XferCount;       /*!< SMBUS transfer counter             */
 150
 151   __IO uint32_t                XferOptions;     /*!< SMBUS transfer options             */
 152
 153   __IO uint32_t                PreviousState;   /*!< SMBUS communication Previous state */
 154
 155   HAL_LockTypeDef              Lock;            /*!< SMBUS locking object               */
 156
 157   __IO uint32_t                State;           /*!< SMBUS communication state          */
 158
 159   __IO uint32_t                ErrorCode;       /*!< SMBUS Error code                   */
 160
 161 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
 162   void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);           /*!< SMBUS Master Tx Transfer completed callback */
 163   void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);           /*!< SMBUS Master Rx Transfer completed callback */
 164   void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);            /*!< SMBUS Slave Tx Transfer completed callback  */
 165   void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);            /*!< SMBUS Slave Rx Transfer completed callback  */
 166   void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);             /*!< SMBUS Listen Complete callback              */
 167   void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus);                  /*!< SMBUS Error callback                        */
 168
 169   void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);  /*!< SMBUS Slave Address Match callback */
 170
 171   void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus);                /*!< SMBUS Msp Init callback                     */
 172   void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus);              /*!< SMBUS Msp DeInit callback                   */
 173
 174 #endif  /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
 175 } SMBUS_HandleTypeDef;
 176
 177 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
 178 /**
 179   * @brief  HAL SMBUS Callback ID enumeration definition
 180   */
 181 typedef enum
 182 {
 183   HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID      = 0x00U,    /*!< SMBUS Master Tx Transfer completed callback ID  */
 184   HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID      = 0x01U,    /*!< SMBUS Master Rx Transfer completed callback ID  */
 185   HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID       = 0x02U,    /*!< SMBUS Slave Tx Transfer completed callback ID   */
 186   HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID       = 0x03U,    /*!< SMBUS Slave Rx Transfer completed callback ID   */
 187   HAL_SMBUS_LISTEN_COMPLETE_CB_ID         = 0x04U,    /*!< SMBUS Listen Complete callback ID               */
 188   HAL_SMBUS_ERROR_CB_ID                   = 0x05U,    /*!< SMBUS Error callback ID                         */
 189
 190   HAL_SMBUS_MSPINIT_CB_ID                 = 0x06U,    /*!< SMBUS Msp Init callback ID                      */
 191   HAL_SMBUS_MSPDEINIT_CB_ID               = 0x07U     /*!< SMBUS Msp DeInit callback ID                    */
 192
 193 } HAL_SMBUS_CallbackIDTypeDef;
 194
 195 /**
 196   * @brief  HAL SMBUS Callback pointer definition
 197   */
 198 typedef  void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus); /*!< pointer to an SMBUS callback function */
 199 typedef  void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an SMBUS Address Match callback function */
 200
 201 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
 202 /**
 203   * @}
 204   */
 205
 206 /**
 207   * @}
 208   */
 209 /* Exported constants --------------------------------------------------------*/
 210
 211 /** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants
 212   * @{
 213   */
 214
 215 /** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter
 216   * @{
 217   */
 218 #define SMBUS_ANALOGFILTER_ENABLE               (0x00000000U)
 219 #define SMBUS_ANALOGFILTER_DISABLE              I2C_CR1_ANFOFF
 220 /**
 221   * @}
 222   */
 223
 224 /** @defgroup SMBUS_addressing_mode SMBUS addressing mode
 225   * @{
 226   */
 227 #define SMBUS_ADDRESSINGMODE_7BIT               (0x00000001U)
 228 #define SMBUS_ADDRESSINGMODE_10BIT              (0x00000002U)
 229 /**
 230   * @}
 231   */
 232
 233 /** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode
 234   * @{
 235   */
 236
 237 #define SMBUS_DUALADDRESS_DISABLE               (0x00000000U)
 238 #define SMBUS_DUALADDRESS_ENABLE                I2C_OAR2_OA2EN
 239 /**
 240   * @}
 241   */
 242
 243 /** @defgroup SMBUS_own_address2_masks SMBUS ownaddress2 masks
 244   * @{
 245   */
 246
 247 #define SMBUS_OA2_NOMASK                        ((uint8_t)0x00U)
 248 #define SMBUS_OA2_MASK01                        ((uint8_t)0x01U)
 249 #define SMBUS_OA2_MASK02                        ((uint8_t)0x02U)
 250 #define SMBUS_OA2_MASK03                        ((uint8_t)0x03U)
 251 #define SMBUS_OA2_MASK04                        ((uint8_t)0x04U)
 252 #define SMBUS_OA2_MASK05                        ((uint8_t)0x05U)
 253 #define SMBUS_OA2_MASK06                        ((uint8_t)0x06U)
 254 #define SMBUS_OA2_MASK07                        ((uint8_t)0x07U)
 255 /**
 256   * @}
 257   */
 258
 259
 260 /** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode
 261   * @{
 262   */
 263 #define SMBUS_GENERALCALL_DISABLE               (0x00000000U)
 264 #define SMBUS_GENERALCALL_ENABLE                I2C_CR1_GCEN
 265 /**
 266   * @}
 267   */
 268
 269 /** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode
 270   * @{
 271   */
 272 #define SMBUS_NOSTRETCH_DISABLE                 (0x00000000U)
 273 #define SMBUS_NOSTRETCH_ENABLE                  I2C_CR1_NOSTRETCH
 274 /**
 275   * @}
 276   */
 277
 278 /** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode
 279   * @{
 280   */
 281 #define SMBUS_PEC_DISABLE                       (0x00000000U)
 282 #define SMBUS_PEC_ENABLE                        I2C_CR1_PECEN
 283 /**
 284   * @}
 285   */
 286
 287 /** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode
 288   * @{
 289   */
 290 #define SMBUS_PERIPHERAL_MODE_SMBUS_HOST        I2C_CR1_SMBHEN
 291 #define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE       (0x00000000U)
 292 #define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP   I2C_CR1_SMBDEN
 293 /**
 294   * @}
 295   */
 296
 297 /** @defgroup SMBUS_ReloadEndMode_definition SMBUS ReloadEndMode definition
 298   * @{
 299   */
 300
 301 #define  SMBUS_SOFTEND_MODE                     (0x00000000U)
 302 #define  SMBUS_RELOAD_MODE                      I2C_CR2_RELOAD
 303 #define  SMBUS_AUTOEND_MODE                     I2C_CR2_AUTOEND
 304 #define  SMBUS_SENDPEC_MODE                     I2C_CR2_PECBYTE
 305 /**
 306   * @}
 307   */
 308
 309 /** @defgroup SMBUS_StartStopMode_definition SMBUS StartStopMode definition
 310   * @{
 311   */
 312
 313 #define  SMBUS_NO_STARTSTOP                     (0x00000000U)
 314 #define  SMBUS_GENERATE_STOP                    (uint32_t)(0x80000000U | I2C_CR2_STOP)
 315 #define  SMBUS_GENERATE_START_READ              (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
 316 #define  SMBUS_GENERATE_START_WRITE             (uint32_t)(0x80000000U | I2C_CR2_START)
 317 /**
 318   * @}
 319   */
 320
 321 /** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition
 322   * @{
 323   */
 324
 325 /* List of XferOptions in usage of :
 326  * 1- Restart condition when direction change
 327  * 2- No Restart condition in other use cases
 328  */
 329 #define  SMBUS_FIRST_FRAME                      SMBUS_SOFTEND_MODE
 330 #define  SMBUS_NEXT_FRAME                       ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE))
 331 #define  SMBUS_FIRST_AND_LAST_FRAME_NO_PEC      SMBUS_AUTOEND_MODE
 332 #define  SMBUS_LAST_FRAME_NO_PEC                SMBUS_AUTOEND_MODE
 333 #define  SMBUS_FIRST_FRAME_WITH_PEC             ((uint32_t)(SMBUS_SOFTEND_MODE | SMBUS_SENDPEC_MODE))
 334 #define  SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC    ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
 335 #define  SMBUS_LAST_FRAME_WITH_PEC              ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
 336
 337 /* List of XferOptions in usage of :
 338  * 1- Restart condition in all use cases (direction change or not)
 339  */
 340 #define  SMBUS_OTHER_FRAME_NO_PEC               (0x000000AAU)
 341 #define  SMBUS_OTHER_FRAME_WITH_PEC             (0x0000AA00U)
 342 #define  SMBUS_OTHER_AND_LAST_FRAME_NO_PEC      (0x00AA0000U)
 343 #define  SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC    (0xAA000000U)
 344 /**
 345   * @}
 346   */
 347
 348 /** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition
 349   * @brief SMBUS Interrupt definition
 350   *        Elements values convention: 0xXXXXXXXX
 351   *           - XXXXXXXX  : Interrupt control mask
 352   * @{
 353   */
 354 #define SMBUS_IT_ERRI                           I2C_CR1_ERRIE
 355 #define SMBUS_IT_TCI                            I2C_CR1_TCIE
 356 #define SMBUS_IT_STOPI                          I2C_CR1_STOPIE
 357 #define SMBUS_IT_NACKI                          I2C_CR1_NACKIE
 358 #define SMBUS_IT_ADDRI                          I2C_CR1_ADDRIE
 359 #define SMBUS_IT_RXI                            I2C_CR1_RXIE
 360 #define SMBUS_IT_TXI                            I2C_CR1_TXIE
 361 #define SMBUS_IT_TX                             (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI)
 362 #define SMBUS_IT_RX                             (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | SMBUS_IT_RXI)
 363 #define SMBUS_IT_ALERT                          (SMBUS_IT_ERRI)
 364 #define SMBUS_IT_ADDR                           (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI)
 365 /**
 366   * @}
 367   */
 368
 369 /** @defgroup SMBUS_Flag_definition SMBUS Flag definition
 370   * @brief Flag definition
 371   *        Elements values convention: 0xXXXXYYYY
 372   *           - XXXXXXXX  : Flag mask
 373   * @{
 374   */
 375
 376 #define  SMBUS_FLAG_TXE                         I2C_ISR_TXE
 377 #define  SMBUS_FLAG_TXIS                        I2C_ISR_TXIS
 378 #define  SMBUS_FLAG_RXNE                        I2C_ISR_RXNE
 379 #define  SMBUS_FLAG_ADDR                        I2C_ISR_ADDR
 380 #define  SMBUS_FLAG_AF                          I2C_ISR_NACKF
 381 #define  SMBUS_FLAG_STOPF                       I2C_ISR_STOPF
 382 #define  SMBUS_FLAG_TC                          I2C_ISR_TC
 383 #define  SMBUS_FLAG_TCR                         I2C_ISR_TCR
 384 #define  SMBUS_FLAG_BERR                        I2C_ISR_BERR
 385 #define  SMBUS_FLAG_ARLO                        I2C_ISR_ARLO
 386 #define  SMBUS_FLAG_OVR                         I2C_ISR_OVR
 387 #define  SMBUS_FLAG_PECERR                      I2C_ISR_PECERR
 388 #define  SMBUS_FLAG_TIMEOUT                     I2C_ISR_TIMEOUT
 389 #define  SMBUS_FLAG_ALERT                       I2C_ISR_ALERT
 390 #define  SMBUS_FLAG_BUSY                        I2C_ISR_BUSY
 391 #define  SMBUS_FLAG_DIR                         I2C_ISR_DIR
 392 /**
 393   * @}
 394   */
 395
 396 /**
 397   * @}
 398   */
 399
 400 /* Exported macros ------------------------------------------------------------*/
 401 /** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros
 402   * @{
 403   */
 404
 405 /** @brief  Reset SMBUS handle state.
 406   * @param  __HANDLE__ specifies the SMBUS Handle.
 407   * @retval None
 408   */
 409 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
 410 #define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__)           do{                                                   \
 411                                                                 (__HANDLE__)->State = HAL_SMBUS_STATE_RESET;       \
 412                                                                 (__HANDLE__)->MspInitCallback = NULL;            \
 413                                                                 (__HANDLE__)->MspDeInitCallback = NULL;          \
 414                                                              } while(0)
 415 #else
 416 #define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__)         ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET)
 417 #endif
 418
 419 /** @brief  Enable the specified SMBUS interrupts.
 420   * @param  __HANDLE__ specifies the SMBUS Handle.
 421   * @param  __INTERRUPT__ specifies the interrupt source to enable.
 422   *        This parameter can be one of the following values:
 423   *            @arg @ref SMBUS_IT_ERRI  Errors interrupt enable
 424   *            @arg @ref SMBUS_IT_TCI   Transfer complete interrupt enable
 425   *            @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
 426   *            @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
 427   *            @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
 428   *            @arg @ref SMBUS_IT_RXI   RX interrupt enable
 429   *            @arg @ref SMBUS_IT_TXI   TX interrupt enable
 430   *
 431   * @retval None
 432   */
 433 #define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
 434
 435 /** @brief  Disable the specified SMBUS interrupts.
 436   * @param  __HANDLE__ specifies the SMBUS Handle.
 437   * @param  __INTERRUPT__ specifies the interrupt source to disable.
 438   *        This parameter can be one of the following values:
 439   *            @arg @ref SMBUS_IT_ERRI  Errors interrupt enable
 440   *            @arg @ref SMBUS_IT_TCI   Transfer complete interrupt enable
 441   *            @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
 442   *            @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
 443   *            @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
 444   *            @arg @ref SMBUS_IT_RXI   RX interrupt enable
 445   *            @arg @ref SMBUS_IT_TXI   TX interrupt enable
 446   *
 447   * @retval None
 448   */
 449 #define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
 450
 451 /** @brief  Check whether the specified SMBUS interrupt source is enabled or not.
 452   * @param  __HANDLE__ specifies the SMBUS Handle.
 453   * @param  __INTERRUPT__ specifies the SMBUS interrupt source to check.
 454   *          This parameter can be one of the following values:
 455   *            @arg @ref SMBUS_IT_ERRI  Errors interrupt enable
 456   *            @arg @ref SMBUS_IT_TCI   Transfer complete interrupt enable
 457   *            @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
 458   *            @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
 459   *            @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
 460   *            @arg @ref SMBUS_IT_RXI   RX interrupt enable
 461   *            @arg @ref SMBUS_IT_TXI   TX interrupt enable
 462   *
 463   * @retval The new state of __IT__ (SET or RESET).
 464   */
 465 #define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
 466
 467 /** @brief  Check whether the specified SMBUS flag is set or not.
 468   * @param  __HANDLE__ specifies the SMBUS Handle.
 469   * @param  __FLAG__ specifies the flag to check.
 470   *        This parameter can be one of the following values:
 471   *            @arg @ref SMBUS_FLAG_TXE     Transmit data register empty
 472   *            @arg @ref SMBUS_FLAG_TXIS    Transmit interrupt status
 473   *            @arg @ref SMBUS_FLAG_RXNE    Receive data register not empty
 474   *            @arg @ref SMBUS_FLAG_ADDR    Address matched (slave mode)
 475   *            @arg @ref SMBUS_FLAG_AF      NACK received flag
 476   *            @arg @ref SMBUS_FLAG_STOPF   STOP detection flag
 477   *            @arg @ref SMBUS_FLAG_TC      Transfer complete (master mode)
 478   *            @arg @ref SMBUS_FLAG_TCR     Transfer complete reload
 479   *            @arg @ref SMBUS_FLAG_BERR    Bus error
 480   *            @arg @ref SMBUS_FLAG_ARLO    Arbitration lost
 481   *            @arg @ref SMBUS_FLAG_OVR     Overrun/Underrun
 482   *            @arg @ref SMBUS_FLAG_PECERR  PEC error in reception
 483   *            @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag
 484   *            @arg @ref SMBUS_FLAG_ALERT   SMBus alert
 485   *            @arg @ref SMBUS_FLAG_BUSY    Bus busy
 486   *            @arg @ref SMBUS_FLAG_DIR     Transfer direction (slave mode)
 487   *
 488   * @retval The new state of __FLAG__ (SET or RESET).
 489   */
 490 #define SMBUS_FLAG_MASK  (0x0001FFFFU)
 491 #define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
 492
 493 /** @brief  Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit.
 494   * @param  __HANDLE__ specifies the SMBUS Handle.
 495   * @param  __FLAG__ specifies the flag to clear.
 496   *          This parameter can be any combination of the following values:
 497   *            @arg @ref SMBUS_FLAG_ADDR    Address matched (slave mode)
 498   *            @arg @ref SMBUS_FLAG_AF      NACK received flag
 499   *            @arg @ref SMBUS_FLAG_STOPF   STOP detection flag
 500   *            @arg @ref SMBUS_FLAG_BERR    Bus error
 501   *            @arg @ref SMBUS_FLAG_ARLO    Arbitration lost
 502   *            @arg @ref SMBUS_FLAG_OVR     Overrun/Underrun
 503   *            @arg @ref SMBUS_FLAG_PECERR  PEC error in reception
 504   *            @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag
 505   *            @arg @ref SMBUS_FLAG_ALERT   SMBus alert
 506   *
 507   * @retval None
 508   */
 509 #define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
 510
 511 /** @brief  Enable the specified SMBUS peripheral.
 512   * @param  __HANDLE__ specifies the SMBUS Handle.
 513   * @retval None
 514   */
 515 #define __HAL_SMBUS_ENABLE(__HANDLE__)                  (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
 516
 517 /** @brief  Disable the specified SMBUS peripheral.
 518   * @param  __HANDLE__ specifies the SMBUS Handle.
 519   * @retval None
 520   */
 521 #define __HAL_SMBUS_DISABLE(__HANDLE__)                 (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
 522
 523 /** @brief  Generate a Non-Acknowledge SMBUS peripheral in Slave mode.
 524   * @param  __HANDLE__ specifies the SMBUS Handle.
 525   * @retval None
 526   */
 527 #define __HAL_SMBUS_GENERATE_NACK(__HANDLE__)           (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
 528
 529 /**
 530   * @}
 531   */
 532
 533
 534 /* Private constants ---------------------------------------------------------*/
 535
 536 /* Private macros ------------------------------------------------------------*/
 537 /** @defgroup SMBUS_Private_Macro SMBUS Private Macros
 538   * @{
 539   */
 540
 541 #define IS_SMBUS_ANALOG_FILTER(FILTER)                  (((FILTER) == SMBUS_ANALOGFILTER_ENABLE) || \
 542                                                           ((FILTER) == SMBUS_ANALOGFILTER_DISABLE))
 543
 544 #define IS_SMBUS_DIGITAL_FILTER(FILTER)                 ((FILTER) <= 0x0000000FU)
 545
 546 #define IS_SMBUS_ADDRESSING_MODE(MODE)                  (((MODE) == SMBUS_ADDRESSINGMODE_7BIT)  || \
 547                                                           ((MODE) == SMBUS_ADDRESSINGMODE_10BIT))
 548
 549 #define IS_SMBUS_DUAL_ADDRESS(ADDRESS)                  (((ADDRESS) == SMBUS_DUALADDRESS_DISABLE) || \
 550                                                           ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE))
 551
 552 #define IS_SMBUS_OWN_ADDRESS2_MASK(MASK)                (((MASK) == SMBUS_OA2_NOMASK)    || \
 553                                                          ((MASK) == SMBUS_OA2_MASK01)    || \
 554                                                          ((MASK) == SMBUS_OA2_MASK02)    || \
 555                                                          ((MASK) == SMBUS_OA2_MASK03)    || \
 556                                                          ((MASK) == SMBUS_OA2_MASK04)    || \
 557                                                          ((MASK) == SMBUS_OA2_MASK05)    || \
 558                                                          ((MASK) == SMBUS_OA2_MASK06)    || \
 559                                                          ((MASK) == SMBUS_OA2_MASK07))
 560
 561 #define IS_SMBUS_GENERAL_CALL(CALL)                     (((CALL) == SMBUS_GENERALCALL_DISABLE) || \
 562                                                          ((CALL) == SMBUS_GENERALCALL_ENABLE))
 563
 564 #define IS_SMBUS_NO_STRETCH(STRETCH)                    (((STRETCH) == SMBUS_NOSTRETCH_DISABLE) || \
 565                                                          ((STRETCH) == SMBUS_NOSTRETCH_ENABLE))
 566
 567 #define IS_SMBUS_PEC(PEC)                               (((PEC) == SMBUS_PEC_DISABLE) || \
 568                                                           ((PEC) == SMBUS_PEC_ENABLE))
 569
 570 #define IS_SMBUS_PERIPHERAL_MODE(MODE)                  (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST)    || \
 571                                                           ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE)  || \
 572                                                           ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
 573
 574 #define IS_SMBUS_TRANSFER_MODE(MODE)                    (((MODE) == SMBUS_RELOAD_MODE)                           || \
 575                                                           ((MODE) == SMBUS_AUTOEND_MODE)                         || \
 576                                                           ((MODE) == SMBUS_SOFTEND_MODE)                         || \
 577                                                           ((MODE) == SMBUS_SENDPEC_MODE)                         || \
 578                                                           ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE))   || \
 579                                                           ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))  || \
 580                                                           ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE))   || \
 581                                                           ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE )))
 582
 583
 584 #define IS_SMBUS_TRANSFER_REQUEST(REQUEST)              (((REQUEST) == SMBUS_GENERATE_STOP)              || \
 585                                                           ((REQUEST) == SMBUS_GENERATE_START_READ)       || \
 586                                                           ((REQUEST) == SMBUS_GENERATE_START_WRITE)      || \
 587                                                           ((REQUEST) == SMBUS_NO_STARTSTOP))
 588
 589
 590 #define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST)      (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)        || \
 591                                                           ((REQUEST) == SMBUS_FIRST_FRAME)                       || \
 592                                                           ((REQUEST) == SMBUS_NEXT_FRAME)                        || \
 593                                                           ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC)       || \
 594                                                           ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC)                 || \
 595                                                           ((REQUEST) == SMBUS_FIRST_FRAME_WITH_PEC)              || \
 596                                                           ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC)     || \
 597                                                           ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
 598
 599 #define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC)                || \
 600                                                           ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC)       || \
 601                                                           ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC)              || \
 602                                                           ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC))
 603
 604 #define SMBUS_RESET_CR1(__HANDLE__)                       ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN)))
 605 #define SMBUS_RESET_CR2(__HANDLE__)                       ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
 606
 607 #define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__)     (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
 608                                                                   (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
 609
 610 #define SMBUS_GET_ADDR_MATCH(__HANDLE__)                  (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17U)
 611 #define SMBUS_GET_DIR(__HANDLE__)                         (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)
 612 #define SMBUS_GET_STOP_MODE(__HANDLE__)                   ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
 613 #define SMBUS_GET_PEC_MODE(__HANDLE__)                    ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE)
 614 #define SMBUS_GET_ALERT_ENABLED(__HANDLE__)                ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN)
 615
 616 #define SMBUS_CHECK_FLAG(__ISR__, __FLAG__)             ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
 617 #define SMBUS_CHECK_IT_SOURCE(__CR1__, __IT__)          ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
 618
 619 #define IS_SMBUS_OWN_ADDRESS1(ADDRESS1)                         ((ADDRESS1) <= 0x000003FFU)
 620 #define IS_SMBUS_OWN_ADDRESS2(ADDRESS2)                         ((ADDRESS2) <= (uint16_t)0x00FFU)
 621
 622 /**
 623   * @}
 624   */
 625
 626 /* Exported functions --------------------------------------------------------*/
 627 /** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions
 628   * @{
 629   */
 630
 631 /** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions
 632  * @{
 633  */
 634
 635 /* Initialization and de-initialization functions  ****************************/
 636 HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus);
 637 HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus);
 638 void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus);
 639 void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus);
 640 HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter);
 641 HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter);
 642
 643 /* Callbacks Register/UnRegister functions  ***********************************/
 644 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
 645 HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID, pSMBUS_CallbackTypeDef pCallback);
 646 HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID);
 647
 648 HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, pSMBUS_AddrCallbackTypeDef pCallback);
 649 HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus);
 650 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
 651 /**
 652   * @}
 653   */
 654
 655 /** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions
 656  * @{
 657  */
 658
 659 /* IO operation functions  *****************************************************/
 660 /** @addtogroup Blocking_mode_Polling Blocking mode Polling
 661  * @{
 662  */
 663 /******* Blocking mode: Polling */
 664 HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
 665 /**
 666   * @}
 667   */
 668
 669 /** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt
 670  * @{
 671  */
 672 /******* Non-Blocking mode: Interrupt */
 673 HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
 674 HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
 675 HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress);
 676 HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
 677 HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
 678
 679 HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
 680 HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
 681 HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus);
 682 HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus);
 683 /**
 684   * @}
 685   */
 686
 687 /** @addtogroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
 688  * @{
 689  */
 690 /******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */
 691 void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
 692 void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
 693 void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
 694 void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
 695 void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
 696 void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
 697 void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);
 698 void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus);
 699 void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus);
 700
 701 /**
 702   * @}
 703   */
 704
 705 /** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions
 706  *  @{
 707  */
 708
 709 /* Peripheral State and Errors functions  **************************************************/
 710 uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
 711 uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
 712
 713 /**
 714   * @}
 715   */
 716
 717 /**
 718   * @}
 719   */
 720
 721 /* Private Functions ---------------------------------------------------------*/
 722 /** @defgroup SMBUS_Private_Functions SMBUS Private Functions
 723   * @{
 724   */
 725 /* Private functions are defined in stm32h7xx_hal_smbus.c file */
 726 /**
 727   * @}
 728   */
 729
 730 /**
 731   * @}
 732   */
 733
 734 /**
 735   * @}
 736   */
 737
 738 /**
 739   * @}
 740   */
 741
 742 #ifdef __cplusplus
 743 }
 744 #endif
 745
 746
 747 #endif /* STM32H7xx_HAL_SMBUS_H */
 748
 749 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/