lib/main/STM32F7/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usb.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32f7xx_ll_usb.h
   4   * @author  MCD Application Team
   5   * @brief   Header file of USB Low Layer HAL module.
   6   ******************************************************************************
   7   * @attention
   8   *
   9   * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
  10   * All rights reserved.</center></h2>
  11   *
  12   * This software component is licensed by ST under BSD 3-Clause license,
  13   * the "License"; You may not use this file except in compliance with the
  14   * License. You may obtain a copy of the License at:
  15   *                        opensource.org/licenses/BSD-3-Clause
  16   *
  17   ******************************************************************************
  18   */
  19
  20 /* Define to prevent recursive inclusion -------------------------------------*/
  21 #ifndef STM32F7xx_LL_USB_H
  22 #define STM32F7xx_LL_USB_H
  23
  24 #ifdef __cplusplus
  25 extern "C" {
  26 #endif
  27
  28 /* Includes ------------------------------------------------------------------*/
  29 #include "stm32f7xx_hal_def.h"
  30
  31 #if defined (USB_OTG_FS) || defined (USB_OTG_HS)
  32 /** @addtogroup STM32F7xx_HAL_Driver
  33   * @{
  34   */
  35
  36 /** @addtogroup USB_LL
  37   * @{
  38   */
  39
  40 /* Exported types ------------------------------------------------------------*/
  41
  42 /**
  43   * @brief  USB Mode definition
  44   */
  45 #if defined (USB_OTG_FS) || defined (USB_OTG_HS)
  46
  47 typedef enum
  48 {
  49   USB_DEVICE_MODE  = 0,
  50   USB_HOST_MODE    = 1,
  51   USB_DRD_MODE     = 2
  52 } USB_OTG_ModeTypeDef;
  53
  54 /**
  55   * @brief  URB States definition
  56   */
  57 typedef enum
  58 {
  59   URB_IDLE = 0,
  60   URB_DONE,
  61   URB_NOTREADY,
  62   URB_NYET,
  63   URB_ERROR,
  64   URB_STALL
  65 } USB_OTG_URBStateTypeDef;
  66
  67 /**
  68   * @brief  Host channel States  definition
  69   */
  70 typedef enum
  71 {
  72   HC_IDLE = 0,
  73   HC_XFRC,
  74   HC_HALTED,
  75   HC_NAK,
  76   HC_NYET,
  77   HC_STALL,
  78   HC_XACTERR,
  79   HC_BBLERR,
  80   HC_DATATGLERR
  81 } USB_OTG_HCStateTypeDef;
  82
  83 /**
  84   * @brief  USB OTG Initialization Structure definition
  85   */
  86 typedef struct
  87 {
  88   uint32_t dev_endpoints;           /*!< Device Endpoints number.
  89                                          This parameter depends on the used USB core.
  90                                          This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
  91
  92   uint32_t Host_channels;           /*!< Host Channels number.
  93                                          This parameter Depends on the used USB core.
  94                                          This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
  95
  96   uint32_t speed;                   /*!< USB Core speed.
  97                                          This parameter can be any value of @ref USB_Core_Speed_                */
  98
  99   uint32_t dma_enable;              /*!< Enable or disable of the USB embedded DMA used only for OTG HS.        */
 100
 101   uint32_t ep0_mps;                 /*!< Set the Endpoint 0 Max Packet size.                                    */
 102
 103   uint32_t phy_itface;              /*!< Select the used PHY interface.
 104                                          This parameter can be any value of @ref USB_Core_PHY_                  */
 105
 106   uint32_t Sof_enable;              /*!< Enable or disable the output of the SOF signal.                        */
 107
 108   uint32_t low_power_enable;        /*!< Enable or disable the low power mode.                                  */
 109
 110   uint32_t lpm_enable;              /*!< Enable or disable Link Power Management.                               */
 111
 112   uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.                                    */
 113
 114   uint32_t vbus_sensing_enable;     /*!< Enable or disable the VBUS Sensing feature.                            */
 115
 116   uint32_t use_dedicated_ep1;       /*!< Enable or disable the use of the dedicated EP1 interrupt.              */
 117
 118   uint32_t use_external_vbus;       /*!< Enable or disable the use of the external VBUS.                        */
 119 } USB_OTG_CfgTypeDef;
 120
 121 typedef struct
 122 {
 123   uint8_t   num;                  /*!< Endpoint number
 124                                        This parameter must be a number between Min_Data = 1 and Max_Data = 15   */
 125
 126   uint8_t   is_in;                /*!< Endpoint direction
 127                                        This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
 128
 129   uint8_t   is_stall;             /*!< Endpoint stall condition
 130                                        This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
 131
 132   uint8_t   type;                 /*!< Endpoint type
 133                                        This parameter can be any value of @ref USB_EP_Type_                     */
 134
 135   uint8_t   data_pid_start;       /*!< Initial data PID
 136                                        This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
 137
 138   uint8_t   even_odd_frame;       /*!< IFrame parity
 139                                        This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
 140
 141   uint16_t  tx_fifo_num;          /*!< Transmission FIFO number
 142                                        This parameter must be a number between Min_Data = 1 and Max_Data = 15   */
 143
 144   uint32_t  maxpacket;            /*!< Endpoint Max packet size
 145                                        This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
 146
 147   uint8_t   *xfer_buff;           /*!< Pointer to transfer buffer                                               */
 148
 149   uint32_t  dma_addr;             /*!< 32 bits aligned transfer buffer address                                  */
 150
 151   uint32_t  xfer_len;             /*!< Current transfer length                                                  */
 152
 153   uint32_t  xfer_count;           /*!< Partial transfer length in case of multi packet transfer                 */
 154 } USB_OTG_EPTypeDef;
 155
 156 typedef struct
 157 {
 158   uint8_t   dev_addr ;          /*!< USB device address.
 159                                      This parameter must be a number between Min_Data = 1 and Max_Data = 255    */
 160
 161   uint8_t   ch_num;             /*!< Host channel number.
 162                                      This parameter must be a number between Min_Data = 1 and Max_Data = 15     */
 163
 164   uint8_t   ep_num;             /*!< Endpoint number.
 165                                      This parameter must be a number between Min_Data = 1 and Max_Data = 15     */
 166
 167   uint8_t   ep_is_in;           /*!< Endpoint direction
 168                                      This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
 169
 170   uint8_t   speed;              /*!< USB Host speed.
 171                                      This parameter can be any value of @ref USB_Core_Speed_                    */
 172
 173   uint8_t   do_ping;            /*!< Enable or disable the use of the PING protocol for HS mode.                */
 174
 175   uint8_t   process_ping;       /*!< Execute the PING protocol for HS mode.                                     */
 176
 177   uint8_t   ep_type;            /*!< Endpoint Type.
 178                                      This parameter can be any value of @ref USB_EP_Type_                       */
 179
 180   uint16_t  max_packet;         /*!< Endpoint Max packet size.
 181                                      This parameter must be a number between Min_Data = 0 and Max_Data = 64KB   */
 182
 183   uint8_t   data_pid;           /*!< Initial data PID.
 184                                      This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
 185
 186   uint8_t   *xfer_buff;         /*!< Pointer to transfer buffer.                                                */
 187
 188   uint32_t  xfer_len;           /*!< Current transfer length.                                                   */
 189
 190   uint32_t  xfer_count;         /*!< Partial transfer length in case of multi packet transfer.                  */
 191
 192   uint8_t   toggle_in;          /*!< IN transfer current toggle flag.
 193                                      This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
 194
 195   uint8_t   toggle_out;         /*!< OUT transfer current toggle flag
 196                                      This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
 197
 198   uint32_t  dma_addr;           /*!< 32 bits aligned transfer buffer address.                                   */
 199
 200   uint32_t  ErrCnt;             /*!< Host channel error count.*/
 201
 202   USB_OTG_URBStateTypeDef  urb_state;  /*!< URB state.
 203                                             This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
 204
 205   USB_OTG_HCStateTypeDef   state;     /*!< Host Channel state.
 206                                            This parameter can be any value of @ref USB_OTG_HCStateTypeDef   */
 207 } USB_OTG_HCTypeDef;
 208 #endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
 209
 210
 211 /* Exported constants --------------------------------------------------------*/
 212
 213 /** @defgroup PCD_Exported_Constants PCD Exported Constants
 214   * @{
 215   */
 216
 217 #if defined (USB_OTG_FS) || defined (USB_OTG_HS)
 218 /** @defgroup USB_OTG_CORE VERSION ID
 219   * @{
 220   */
 221 #define USB_OTG_CORE_ID_300A          0x4F54300AU
 222 #define USB_OTG_CORE_ID_310A          0x4F54310AU
 223 /**
 224   * @}
 225   */
 226
 227 /** @defgroup USB_Core_Mode_ USB Core Mode
 228   * @{
 229   */
 230 #define USB_OTG_MODE_DEVICE                    0U
 231 #define USB_OTG_MODE_HOST                      1U
 232 #define USB_OTG_MODE_DRD                       2U
 233 /**
 234   * @}
 235   */
 236
 237 /** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed
 238   * @{
 239   */
 240 #define USB_OTG_SPEED_HIGH                     0U
 241 #define USB_OTG_SPEED_HIGH_IN_FULL             1U
 242 #define USB_OTG_SPEED_FULL                     3U
 243 /**
 244   * @}
 245   */
 246
 247 /** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY
 248   * @{
 249   */
 250 #define USB_OTG_ULPI_PHY                       1U
 251 #define USB_OTG_EMBEDDED_PHY                   2U
 252 #define USB_OTG_HS_EMBEDDED_PHY                3U
 253
 254 #if !defined  (USB_HS_PHYC_TUNE_VALUE)
 255 #define USB_HS_PHYC_TUNE_VALUE    0x00000F13U /*!< Value of USB HS PHY Tune */
 256 #endif /* USB_HS_PHYC_TUNE_VALUE */
 257 /**
 258   * @}
 259   */
 260
 261 /** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value
 262   * @{
 263   */
 264 #ifndef USBD_HS_TRDT_VALUE
 265 #define USBD_HS_TRDT_VALUE           9U
 266 #endif /* USBD_HS_TRDT_VALUE */
 267 #ifndef USBD_FS_TRDT_VALUE
 268 #define USBD_FS_TRDT_VALUE           5U
 269 #define USBD_DEFAULT_TRDT_VALUE      9U
 270 #endif /* USBD_HS_TRDT_VALUE */
 271 /**
 272   * @}
 273   */
 274
 275 /** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS
 276   * @{
 277   */
 278 #define USB_OTG_HS_MAX_PACKET_SIZE             512U
 279 #define USB_OTG_FS_MAX_PACKET_SIZE             64U
 280 #define USB_OTG_MAX_EP0_SIZE                   64U
 281 /**
 282   * @}
 283   */
 284
 285 /** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency
 286   * @{
 287   */
 288 #define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ     (0U << 1)
 289 #define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ     (1U << 1)
 290 #define DSTS_ENUMSPD_LS_PHY_6MHZ               (2U << 1)
 291 #define DSTS_ENUMSPD_FS_PHY_48MHZ              (3U << 1)
 292 /**
 293   * @}
 294   */
 295
 296 /** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval
 297   * @{
 298   */
 299 #define DCFG_FRAME_INTERVAL_80                 0U
 300 #define DCFG_FRAME_INTERVAL_85                 1U
 301 #define DCFG_FRAME_INTERVAL_90                 2U
 302 #define DCFG_FRAME_INTERVAL_95                 3U
 303 /**
 304   * @}
 305   */
 306
 307 /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
 308   * @{
 309   */
 310 #define DEP0CTL_MPS_64                         0U
 311 #define DEP0CTL_MPS_32                         1U
 312 #define DEP0CTL_MPS_16                         2U
 313 #define DEP0CTL_MPS_8                          3U
 314 /**
 315   * @}
 316   */
 317
 318 /** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed
 319   * @{
 320   */
 321 #define EP_SPEED_LOW                           0U
 322 #define EP_SPEED_FULL                          1U
 323 #define EP_SPEED_HIGH                          2U
 324 /**
 325   * @}
 326   */
 327
 328 /** @defgroup USB_LL_EP_Type USB Low Layer EP Type
 329   * @{
 330   */
 331 #define EP_TYPE_CTRL                           0U
 332 #define EP_TYPE_ISOC                           1U
 333 #define EP_TYPE_BULK                           2U
 334 #define EP_TYPE_INTR                           3U
 335 #define EP_TYPE_MSK                            3U
 336 /**
 337   * @}
 338   */
 339
 340 /** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines
 341   * @{
 342   */
 343 #define STS_GOUT_NAK                           1U
 344 #define STS_DATA_UPDT                          2U
 345 #define STS_XFER_COMP                          3U
 346 #define STS_SETUP_COMP                         4U
 347 #define STS_SETUP_UPDT                         6U
 348 /**
 349   * @}
 350   */
 351
 352 /** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines
 353   * @{
 354   */
 355 #define HCFG_30_60_MHZ                         0U
 356 #define HCFG_48_MHZ                            1U
 357 #define HCFG_6_MHZ                             2U
 358 /**
 359   * @}
 360   */
 361
 362 /** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines
 363   * @{
 364   */
 365 #define HPRT0_PRTSPD_HIGH_SPEED                0U
 366 #define HPRT0_PRTSPD_FULL_SPEED                1U
 367 #define HPRT0_PRTSPD_LOW_SPEED                 2U
 368 /**
 369   * @}
 370   */
 371
 372 #define HCCHAR_CTRL                            0U
 373 #define HCCHAR_ISOC                            1U
 374 #define HCCHAR_BULK                            2U
 375 #define HCCHAR_INTR                            3U
 376
 377 #define HC_PID_DATA0                           0U
 378 #define HC_PID_DATA2                           1U
 379 #define HC_PID_DATA1                           2U
 380 #define HC_PID_SETUP                           3U
 381
 382 #define GRXSTS_PKTSTS_IN                       2U
 383 #define GRXSTS_PKTSTS_IN_XFER_COMP             3U
 384 #define GRXSTS_PKTSTS_DATA_TOGGLE_ERR          5U
 385 #define GRXSTS_PKTSTS_CH_HALTED                7U
 386
 387 #define USBx_PCGCCTL    *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE)
 388 #define USBx_HPRT0      *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE)
 389
 390 #define USBx_DEVICE     ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE))
 391 #define USBx_INEP(i)    ((USB_OTG_INEndpointTypeDef *)(USBx_BASE + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
 392 #define USBx_OUTEP(i)   ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
 393 #define USBx_DFIFO(i)   *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE))
 394
 395 #define USBx_HOST       ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE))
 396 #define USBx_HC(i)      ((USB_OTG_HostChannelTypeDef *)(USBx_BASE + USB_OTG_HOST_CHANNEL_BASE + ((i) * USB_OTG_HOST_CHANNEL_SIZE)))
 397 #define USBPHYC         ((USBPHYC_GlobalTypeDef *)((uint32_t )USB_PHY_HS_CONTROLLER_BASE))
 398 #endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
 399
 400 #define EP_ADDR_MSK                            0xFU
 401 /**
 402   * @}
 403   */
 404
 405 /* Exported macro ------------------------------------------------------------*/
 406 /** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros
 407   * @{
 408   */
 409 #if defined (USB_OTG_FS) || defined (USB_OTG_HS)
 410 #define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)     ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
 411 #define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)   ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
 412
 413 #define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__)          (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
 414 #define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__)         (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
 415 #endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
 416 /**
 417   * @}
 418   */
 419
 420 /* Exported functions --------------------------------------------------------*/
 421 /** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions
 422   * @{
 423   */
 424 #if defined (USB_OTG_FS) || defined (USB_OTG_HS)
 425 HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
 426 HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
 427 HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
 428 HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
 429 HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed);
 430 HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode);
 431 HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed);
 432 HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx);
 433 HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num);
 434 HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
 435 HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
 436 HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
 437 HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
 438 HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma);
 439 HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma);
 440 HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
 441 void             *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
 442 HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
 443 HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
 444 HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address);
 445 HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx);
 446 HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx);
 447 HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
 448 HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx);
 449 HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
 450 uint8_t           USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
 451 uint32_t          USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
 452 uint32_t          USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx);
 453 uint32_t          USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
 454 uint32_t          USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum);
 455 uint32_t          USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
 456 uint32_t          USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum);
 457 void              USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
 458
 459 HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
 460 HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq);
 461 HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
 462 HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state);
 463 uint32_t          USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx);
 464 uint32_t          USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx);
 465 HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
 466                               uint8_t ch_num,
 467                               uint8_t epnum,
 468                               uint8_t dev_address,
 469                               uint8_t speed,
 470                               uint8_t ep_type,
 471                               uint16_t mps);
 472 HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
 473 uint32_t          USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx);
 474 HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num);
 475 HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num);
 476 HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
 477 HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
 478 HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
 479 #endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
 480
 481 /**
 482   * @}
 483   */
 484
 485 /**
 486   * @}
 487   */
 488
 489 /**
 490   * @}
 491   */
 492
 493 /**
 494   * @}
 495   */
 496 #endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
 497
 498 #ifdef __cplusplus
 499 }
 500 #endif
 501
 502
 503 #endif /* STM32F7xx_LL_USB_H */
 504
 505 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/