src/main/target/STM32H750/target.h

   1 /*
   2  * This file is part of Cleanflight and Betaflight.
   3  *
   4  * Cleanflight and Betaflight are free software. You can redistribute
   5  * this software and/or modify this software under the terms of the
   6  * GNU General Public License as published by the Free Software
   7  * Foundation, either version 3 of the License, or (at your option)
   8  * any later version.
   9  *
  10  * Cleanflight and Betaflight are distributed in the hope that they
  11  * will be useful, but WITHOUT ANY WARRANTY; without even the implied
  12  * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  13  * See the GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this software.
  17  *
  18  * If not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 /*
  22  * This target won't actually build a target that you can boot, it is meant as
  23  * a base target ONLY.
  24  *
  25  * When defining a target that uses this as a base you currently:
  26  *
  27  * 1) *must* define ALL the SPI instances that the target has, including their pins.
  28  * 2) *must* define the storage subsystem used to boot, e.g. see CONFIG_IN_xxx.
  29  * 3) *must* define all the settings required for the config storage system to
  30  *    be able to load the config at boot time BEFORE it has actually loaded a config.
  31  *    e.g. for QSPI define the QSPI instance, pins, mode, etc,
  32  *         for SDCARD define the SD card bus (SPI/SDIO), pins, etc.
  33  *
  34  */
  35
  36 #pragma once
  37
  38 #ifndef TARGET_BOARD_IDENTIFIER
  39 #define TARGET_BOARD_IDENTIFIER "S750"
  40 #endif
  41
  42 #ifndef USBD_PRODUCT_STRING
  43 #define USBD_PRODUCT_STRING     "Betaflight STM32H750"
  44 #endif
  45
  46 #if !defined(USE_I2C)
  47 #define USE_I2C
  48 #define USE_I2C_DEVICE_1
  49 #define USE_I2C_DEVICE_2
  50 #define USE_I2C_DEVICE_3
  51 #define USE_I2C_DEVICE_4
  52 #define I2C_FULL_RECONFIGURABILITY
  53 #endif
  54
  55 // Provide a default so that this target builds on the build server.
  56 #if !defined(USE_SPI)
  57 #define USE_SPI
  58 #define USE_SPI_DEVICE_1
  59 #define USE_SPI_DEVICE_2
  60 #define USE_SPI_DEVICE_3
  61 #define USE_SPI_DEVICE_4
  62 #define USE_SPI_DEVICE_5
  63 #define USE_SPI_DEVICE_6
  64 #define SPI_FULL_RECONFIGURABILITY
  65 #endif
  66
  67 // Provide a default so that this target builds on the build server.
  68 #if !defined(USE_SPI)
  69 #define USE_SPI
  70 #define USE_SPI_DEVICE_1
  71 #define USE_SPI_DEVICE_2
  72 #define USE_SPI_DEVICE_3
  73 #define USE_SPI_DEVICE_4
  74 #define USE_SPI_DEVICE_5
  75 #define USE_SPI_DEVICE_6
  76 #define SPI_FULL_RECONFIGURABILITY
  77 #endif
  78
  79 #define USE_UART1
  80 #define USE_UART2
  81 #define USE_UART3
  82 #define USE_UART4
  83 #define USE_UART5
  84 #define USE_UART6
  85 #define USE_UART7
  86 #define USE_UART8
  87 #define USE_LP_UART1
  88
  89 #define SERIAL_PORT_COUNT       (UNIFIED_SERIAL_PORT_COUNT + 8)
  90
  91 #define TARGET_IO_PORTA 0xffff
  92 #define TARGET_IO_PORTB 0xffff
  93 #define TARGET_IO_PORTC 0xffff
  94 #define TARGET_IO_PORTD 0xffff
  95 #define TARGET_IO_PORTE 0xffff
  96 #define TARGET_IO_PORTF 0xffff
  97
  98 #define USE_BEEPER
  99
 100 #define USE_VCP
 101
 102 #define USE_SOFTSERIAL1
 103 #define USE_SOFTSERIAL2
 104
 105 #define UNIFIED_SERIAL_PORT_COUNT       3
 106
 107 #define USE_USB_DETECT
 108
 109 #define USE_ESCSERIAL
 110
 111 #define USE_ADC
 112
 113 // Provide a default so that this target builds on the build server.
 114 #if !defined(CONFIG_IN_RAM) && !defined(CONFIG_IN_SDCARD) && !defined(CONFIG_IN_EXTERNAL_FLASH)
 115 #define CONFIG_IN_RAM
 116 #endif