src/config/TMVELOXF411/config.h

   1 /*
   2  * This file is part of Betaflight.
   3  *
   4  * Betaflight is free software. You can redistribute this software
   5  * and/or modify this software under the terms of the GNU General
   6  * Public License as published by the Free Software Foundation,
   7  * either version 3 of the License, or (at your option) any later
   8  * version.
   9  *
  10  * Betaflight is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  13  *
  14  * See the GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public
  17  * License along with this software.
  18  *
  19  * If not, see <http://www.gnu.org/licenses/>.
  20  */
  21
  22 #pragma once
  23
  24 #define FC_TARGET_MCU     STM32F411
  25
  26 #define BOARD_NAME        TMVELOXF411
  27 #define MANUFACTURER_ID   TMTR
  28
  29 #define USE_GYRO
  30 #define USE_ACC
  31 #define USE_ACCGYRO_BMI270
  32 #define USE_FLASH
  33 #define USE_FLASH_M25P16
  34 #define USE_MAX7456
  35
  36 #define BEEPER_PIN           PB2
  37 #define MOTOR1_PIN           PB0
  38 #define MOTOR2_PIN           PB1
  39 #define MOTOR3_PIN           PB6
  40 #define MOTOR4_PIN           PB7
  41 #define RX_PPM_PIN           PA3
  42 #define LED_STRIP_PIN        PA8
  43 #define UART1_TX_PIN         PA9
  44 #define UART2_TX_PIN         PA2
  45 #define UART1_RX_PIN         PA10
  46 #define UART2_RX_PIN         PA3
  47 #define I2C1_SCL_PIN         PB8
  48 #define I2C1_SDA_PIN         PB9
  49 #define LED0_PIN             PC13
  50 #define SPI1_SCK_PIN         PA5
  51 #define SPI2_SCK_PIN         PB13
  52 #define SPI3_SCK_PIN         PB3
  53 #define SPI1_SDI_PIN         PA6
  54 #define SPI2_SDI_PIN         PB14
  55 #define SPI3_SDI_PIN         PB4
  56 #define SPI1_SDO_PIN         PA7
  57 #define SPI2_SDO_PIN         PB15
  58 #define SPI3_SDO_PIN         PB5
  59 #define ADC_VBAT_PIN         PA1
  60 #define ADC_CURR_PIN         PA0
  61 #define FLASH_CS_PIN         PA15
  62 #define MAX7456_SPI_CS_PIN   PB12
  63 #define GYRO_1_EXTI_PIN      PC15
  64 #define GYRO_1_CS_PIN        PA4
  65
  66 #define TIMER_PIN_MAPPING \
  67     TIMER_PIN_MAP( 0, PA3 , 2,  0) \
  68     TIMER_PIN_MAP( 1, PB0 , 2,  0) \
  69     TIMER_PIN_MAP( 2, PB1 , 2,  0) \
  70     TIMER_PIN_MAP( 3, PB6 , 1,  0) \
  71     TIMER_PIN_MAP( 4, PB7 , 1,  0) \
  72     TIMER_PIN_MAP( 5, PA8 , 1,  0)
  73
  74
  75 #define ADC1_DMA_OPT        0
  76
  77 //TODO #define MAG_BUSTYPE I2C
  78 #define MAG_I2C_INSTANCE (I2CDEV_1)
  79
  80 #define DEFAULT_BLACKBOX_DEVICE     BLACKBOX_DEVICE_FLASH
  81 #define DEFAULT_DSHOT_BURST DSHOT_DMAR_AUTO
  82 #define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_OFF
  83 #define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
  84 #define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
  85 #define DEFAULT_CURRENT_METER_SCALE 250
  86 #define BEEPER_INVERTED
  87 #define SYSTEM_HSE_MHZ 8
  88 #define MAX7456_SPI_INSTANCE SPI2
  89 #define FLASH_SPI_INSTANCE SPI3
  90 #define USE_SPI_GYRO
  91 #define GYRO_1_SPI_INSTANCE SPI1
  92 #define GYRO_1_ALIGN CW270_DEG
  93 #define GYRO_1_ALIGN_YAW 2700