bfd/mep-relocs.pl

   1 #!/usr/bin/perl
   2 # -*- perl -*-
   3 #
   4 # Toshiba MeP Media Engine Relocation Generator
   5 # Copyright (C) 2001-2024 Free Software Foundation, Inc.
   6 # This file is part of BFD.
   7 # Originally written by DJ Delorie <dj@redhat.com>
   8 #
   9 # This program is free software; you can redistribute it and/or modify
  10 # it under the terms of the GNU General Public License as published by
  11 # the Free Software Foundation; either version 3 of the License, or
  12 # (at your option) any later version.
  13 #
  14 # This program is distributed in the hope that it will be useful,
  15 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 # GNU General Public License for more details.
  18 #
  19 # You should have received a copy of the GNU General Public License
  20 # along with this program; if not, write to the Free Software
  21 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  22 # MA 02110-1301, USA.
  23
  24
  25 # Usage: Run this anywhere inside your source tree.  It will read
  26 # include/elf/mep.h and scan the comments therein.  It will renumber
  27 # the relocs to be sequential (this is needed so that bfd/elf32-mep.h
  28 # works) if needed.  It will then update the reloc list in bfd/reloc.c
  29 # and the howto, mapping, and apply routines in bfd/elf32-mep.c.  You
  30 # can then regenerate bfd-in2.h and check everything in.
  31
  32 # FIXME: After the relocation list is finalized, change this to
  33 # *verify* the reloc list, rather than resequence it.
  34
  35 while (! -f "include/elf/mep.h" && ! -f "bfd/reloc.c") {
  36     chdir "..";
  37     $pwd = `pwd`;
  38     if ($pwd !~ m@/.*/@) {
  39         print STDERR "Cannot find include/elf/mep.h or bfd/reloc.h\n";
  40         exit 1;
  41     }
  42 }
  43 $pwd = `pwd`;
  44 print "srctop is $pwd";
  45
  46 printf "Reading include/elf/mep.h ...\n";
  47 open(MEPH, "include/elf/mep.h");
  48 open(MEPHO, "> include/elf/mep.h.new") || die("mep.h.new create: $!");
  49 $val = 0;
  50 while (<MEPH>) {
  51     if (($pre,$rel,$rest) = /(.*RELOC_NUMBER \()([^,]+), *\d+(.*)/) {
  52         $rest =~ s/[\r\n]+$//;
  53         print (MEPHO "$pre$rel, $val$rest\n") || die("mep.h.new write: $!");
  54         $val ++;
  55         $rel =~ s/R_MEP_//;
  56         push(@relocs, $rel);
  57
  58         $rest =~ s@.*/\* @@;
  59         ($pattern, $sign, $attrs) = $rest =~ m@(.*) ([US]) (.*)\*/@;
  60         $pattern =~ s/ //g;
  61         push(@pattern, $pattern);
  62         push(@sign, $sign);
  63         push(@attrs, $attrs);
  64
  65         printf "%4d $rel p=`$pattern' s=`$sign' a=`$attrs'\n", $#pattern;
  66
  67     } else {
  68         print(MEPHO) || die("mep.h.new write: $!");
  69     }
  70 }
  71 close(MEPH);
  72 close(MEPHO) || die("mep.h.new close: $!");
  73
  74 &swapfile("include/elf/mep.h");
  75
  76 redo_file ("bfd/reloc.c",
  77            "",
  78            "ENUMDOC\n  Toshiba Media Processor Relocations.\n\nCOMMENT\n",
  79            "ENUM\n  BFD_RELOC_MEP_%s\n",
  80            "");
  81
  82 $autogen = "    /* This section generated from bfd/mep-relocs.pl from include/elf/mep.h.  */\n";
  83
  84 redo_file ("bfd/elf32-mep.c",
  85            "MEPRELOC:HOWTO",
  86            $autogen,
  87            "MEPRELOC:END",
  88            "",
  89            "&emit_howto();",
  90            "MEPRELOC:MAP",
  91            $autogen,
  92            "MEPRELOC:END",
  93            "",
  94            "    MAP(%s);\n",
  95            "MEPRELOC:APPLY",
  96            $autogen,
  97            "MEPRELOC:END",
  98            "",
  99            "&emit_apply();",
 100            );
 101
 102 sub mask2shifts {
 103     my ($mask) = @_;
 104     my ($bits, $left, $right, $ci, $c, $cv);
 105     $bits = 0;
 106     $left = 0;
 107     $right = 32;
 108     for ($ci=0; $ci<length($mask); $ci++) {
 109         $c = substr($mask, $ci, 1);
 110         $left++;
 111         next if $c eq '-';
 112         $left = 0;
 113         $cv = ord($c) - ord('0');
 114         $cv -= ord('a') - ord('9') - 1 if $cv > 9;
 115         $right = $cv unless $right < $cv;
 116         $bits = $cv+1 unless $bits > $cv+1;
 117     }
 118     $mask =~ tr/-/1/c;
 119     $mask =~ tr/-/0/;
 120     ($rmask = $mask) =~ tr/01/10/;
 121     $mask = unpack("H*", pack("B*", $mask));
 122     $rmask = unpack("H*", pack("B*", $rmask));
 123     return ($bits, $left, $right, $mask, $rmask);
 124 }
 125
 126 sub emit_howto {
 127     for ($i=2; $i<=$#relocs; $i++) {
 128         $mask = $pattern[$i];
 129
 130         if (length($mask) == 8)     { $bytesize = 0; }
 131         elsif (length($mask) == 16) { $bytesize = 1; }
 132         elsif (length($mask) == 32) { $bytesize = 2; }
 133
 134         ($bits, $left, $right, $mask) = mask2shifts ($mask);
 135         $bits[$i] = $bits;
 136         $pcrel = 0;
 137         $pcrel = 1 if $attrs[$i] =~ /pc-rel/i;
 138         $overflow = $sign[$i];
 139         $overflow = 'N' if $attrs[$i] =~ /no-overflow/;
 140
 141         $c = "$relocs[$i],";
 142         printf(NEW "  MEPREL (R_MEP_%-10s%d,%3d,%2d,%2d,%2d,%2s, 0x%s),\n",
 143                $c, $bytesize, $bits, $left, $right, $pcrel, $overflow, $mask);
 144     }
 145 }
 146
 147 sub emit_apply {
 148     for ($i=2; $i<=$#relocs; $i++) {
 149         $v = "u";
 150         $v = "s" if $sign[$i] =~ /S/;
 151         if (length($pattern[$i]) == 8) {
 152             $e = ''; # no endian swap for bytes
 153         } elsif ($pattern[$i] =~ /-/ || length($pattern[$i]) == 16) {
 154             $e = '^e2'; # endian swap - 2byte words only
 155         } else {
 156             $e = '^e4' # endian swap for data
 157         }
 158         print NEW "    case R_MEP_$relocs[$i]: /* $pattern[$i] */\n";
 159         if ($relocs[$i] =~ /HI16S/) {
 160             print NEW "      u += 0x8000;\n"
 161         }
 162         if ($attrs[$i] =~ /tp-rel/i) {
 163             print NEW "      u -= mep_tpoff_base(rel->r_offset);\n";
 164         }
 165         if ($attrs[$i] =~ /gp-rel/i) {
 166             print NEW "      u -= mep_sdaoff_base(rel->r_offset);\n";
 167         }
 168         if ($attrs[$i] !~ /no-overflow/ && $bits[$i] < 32) {
 169             if ($v eq "u") {
 170                 $max = (1 << $bits[$i]) - 1;
 171                 print NEW "      if (u > $max) r = bfd_reloc_overflow;\n";
 172             } else {
 173                 $min = (1 << ($bits[$i]-1));
 174                 $max = (1 << ($bits[$i])) - 1;
 175                 print NEW "      if (u + $min > $max) r = bfd_reloc_overflow;\n";
 176             }
 177         }
 178         for ($b=0; $b<length($pattern[$i]); $b += 8) {
 179             $mask = substr($pattern[$i], $b, 8);
 180             ($bits, $left, $right, $mask, $rmask) = mask2shifts ($mask);
 181             if ($left > $right) { $left -= $right; $right = 0; }
 182             else { $right -= $left; $left = 0; }
 183
 184             if ($mask ne "00") {
 185                 $bb = $b / 8;
 186                 print NEW "      byte[$bb$e] = ";
 187                 print NEW "(byte[$bb$e] & 0x$rmask) | " if $rmask ne "00";
 188                 if ($left) {
 189                     print NEW "((u << $left) & 0x$mask)";
 190                 } elsif ($right) {
 191                     print NEW "((u >> $right) & 0x$mask)";
 192                 } else {
 193                     print NEW "(u & 0x$mask)";
 194                 }
 195                 print NEW ";\n";
 196             }
 197         }
 198         print NEW "      break;\n";
 199     }
 200 }
 201
 202
 203 #-----------------------------------------------------------------------------
 204
 205 sub redo_file {
 206     my ($file, @control) = @_;
 207     open(OLD, $file);
 208     open(NEW, "> $file.new") || die("$file.new create: $!");
 209
 210     print "Scanning file $file ...\n";
 211
 212     while (1) {
 213         $start = shift @control;
 214         $prefix = shift @control;
 215         $end = shift @control;
 216         $suffix = shift @control;
 217         $pattern = shift @control;
 218
 219         if (!$start) {
 220             print NEW while <OLD>;
 221             last;
 222         }
 223
 224         print "  looking for $start\n";
 225         while (<OLD>) {
 226             print NEW;
 227             last if /\Q$start\E/;
 228         }
 229         print "can't find $start\n" unless $_;
 230         last unless $_;
 231
 232         print NEW $prefix;
 233         if ($pattern =~ /^\&/) {
 234             eval $pattern;
 235             die("$pattern: $@") if $@;
 236         } else {
 237             for $i (2..$#relocs) {
 238                 printf (NEW "$pattern", $relocs[$i]) || die("$file.new write: $!");
 239                 $pattern =~ s/^ENUM\n/ENUMX\n/;
 240             }
 241         }
 242         print NEW $suffix;
 243         while (<OLD>) {
 244             last if /\Q$end\E/;
 245         }
 246         print NEW;
 247     }
 248
 249     close(OLD);
 250     close(NEW) || die("$file.new close: $!");
 251     &swapfile($file);
 252 }
 253
 254 #-----------------------------------------------------------------------------
 255
 256 sub swapfile {
 257     my ($f) = @_;
 258     if ( ! -f "$f.save") {
 259         system "cp $f $f.save";
 260     }
 261     open(ORIG, $f);
 262     open(NEW, "$f.new");
 263     while (<ORIG>) {
 264         $n = <NEW>;
 265         if ($n ne $_) {
 266             close(ORIG);
 267             close(NEW);
 268             print "  Updating $f\n";
 269             rename "$f", "$f.old";
 270             rename "$f.new", "$f";
 271             return;
 272         }
 273     }
 274     close(ORIG);
 275     close(NEW);
 276     print "  No change to $f\n";
 277     unlink "$f.new";
 278 }