1 /* memrchr -- find the last occurrence of a byte in a memory block
3 Copyright (C) 1991, 1993, 1996-1997, 1999-2000, 2003-2022 Free Software
6 Based on strlen implementation by Torbjorn Granlund (tege@sics.se),
7 with help from Dan Sahlin (dan@sics.se) and
8 commentary by Jim Blandy (jimb@ai.mit.edu);
9 adaptation to memchr suggested by Dick Karpinski (dick@cca.ucsf.edu),
10 and implemented by Roland McGrath (roland@ai.mit.edu).
12 This file is free software: you can redistribute it and/or modify
13 it under the terms of the GNU Lesser General Public License as
14 published by the Free Software Foundation, either version 3 of the
15 License, or (at your option) any later version.
17 This file is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU Lesser General Public License for more details.
22 You should have received a copy of the GNU Lesser General Public License
23 along with this program. If not, see <https://www.gnu.org/licenses/>. */
29 # define reg_char char
41 # define __memrchr memrchr
44 /* Search no more than N bytes of S for C. */
46 __memrchr (void const *s
, int c_in
, size_t n
)
48 /* On 32-bit hardware, choosing longword to be a 32-bit unsigned
49 long instead of a 64-bit uintmax_t tends to give better
50 performance. On 64-bit hardware, unsigned long is generally 64
51 bits already. Change this typedef to experiment with
53 typedef unsigned long int longword
;
55 const unsigned char *char_ptr
;
56 const longword
*longword_ptr
;
57 longword repeated_one
;
61 c
= (unsigned char) c_in
;
63 /* Handle the last few bytes by reading one byte at a time.
64 Do this until CHAR_PTR is aligned on a longword boundary. */
65 for (char_ptr
= (const unsigned char *) s
+ n
;
66 n
> 0 && (size_t) char_ptr
% sizeof (longword
) != 0;
69 return (void *) char_ptr
;
71 longword_ptr
= (const void *) char_ptr
;
73 /* All these elucidatory comments refer to 4-byte longwords,
74 but the theory applies equally well to any size longwords. */
76 /* Compute auxiliary longword values:
77 repeated_one is a value which has a 1 in every byte.
78 repeated_c has c in every byte. */
79 repeated_one
= 0x01010101;
80 repeated_c
= c
| (c
<< 8);
81 repeated_c
|= repeated_c
<< 16;
82 if (0xffffffffU
< (longword
) -1)
84 repeated_one
|= repeated_one
<< 31 << 1;
85 repeated_c
|= repeated_c
<< 31 << 1;
86 if (8 < sizeof (longword
))
90 for (i
= 64; i
< sizeof (longword
) * 8; i
*= 2)
92 repeated_one
|= repeated_one
<< i
;
93 repeated_c
|= repeated_c
<< i
;
98 /* Instead of the traditional loop which tests each byte, we will test a
99 longword at a time. The tricky part is testing if *any of the four*
100 bytes in the longword in question are equal to c. We first use an xor
101 with repeated_c. This reduces the task to testing whether *any of the
102 four* bytes in longword1 is zero.
105 ((longword1 - repeated_one) & ~longword1) & (repeated_one << 7).
106 That is, we perform the following operations:
107 1. Subtract repeated_one.
109 3. & a mask consisting of 0x80 in every byte.
110 Consider what happens in each byte:
111 - If a byte of longword1 is zero, step 1 and 2 transform it into 0xff,
112 and step 3 transforms it into 0x80. A carry can also be propagated
113 to more significant bytes.
114 - If a byte of longword1 is nonzero, let its lowest 1 bit be at
115 position k (0 <= k <= 7); so the lowest k bits are 0. After step 1,
116 the byte ends in a single bit of value 0 and k bits of value 1.
117 After step 2, the result is just k bits of value 1: 2^k - 1. After
118 step 3, the result is 0. And no carry is produced.
119 So, if longword1 has only non-zero bytes, tmp is zero.
120 Whereas if longword1 has a zero byte, call j the position of the least
121 significant zero byte. Then the result has a zero at positions 0, ...,
122 j-1 and a 0x80 at position j. We cannot predict the result at the more
123 significant bytes (positions j+1..3), but it does not matter since we
124 already have a non-zero bit at position 8*j+7.
126 So, the test whether any byte in longword1 is zero is equivalent to
127 testing whether tmp is nonzero. */
129 while (n
>= sizeof (longword
))
131 longword longword1
= *--longword_ptr
^ repeated_c
;
133 if ((((longword1
- repeated_one
) & ~longword1
)
134 & (repeated_one
<< 7)) != 0)
139 n
-= sizeof (longword
);
142 char_ptr
= (const unsigned char *) longword_ptr
;
144 /* At this point, we know that either n < sizeof (longword), or one of the
145 sizeof (longword) bytes starting at char_ptr is == c. On little-endian
146 machines, we could determine the first such byte without any further
147 memory accesses, just by looking at the tmp result from the last loop
148 iteration. But this does not work on big-endian machines. Choose code
149 that works in both cases. */
153 if (*--char_ptr
== c
)
154 return (void *) char_ptr
;
160 weak_alias (__memrchr
, memrchr
)