gdb/i386-sol2-nat.c

   1 /* Native-dependent code for Solaris x86.
   2
   3    Copyright (C) 1988-2022 Free Software Foundation, Inc.
   4
   5    This file is part of GDB.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
  19
  20 #include "defs.h"
  21 #include "regcache.h"
  22
  23 #include <sys/reg.h>
  24 #include <sys/procfs.h>
  25 #include "gregset.h"
  26 #include "target.h"
  27 #include "procfs.h"
  28
  29 /* This file provids the (temporary) glue between the Solaris x86
  30    target dependent code and the machine independent SVR4 /proc
  31    support.  */
  32
  33 /* Solaris 10 (Solaris 2.10, SunOS 5.10) and up support two process
  34    data models, the traditional 32-bit data model (ILP32) and the
  35    64-bit data model (LP64).  The format of /proc depends on the data
  36    model of the observer (the controlling process, GDB in our case).
  37    The Solaris header files conveniently define PR_MODEL_NATIVE to the
  38    data model of the controlling process.  If its value is
  39    PR_MODEL_LP64, we know that GDB is being compiled as a 64-bit
  40    program.
  41
  42    Note that a 32-bit GDB won't be able to debug a 64-bit target
  43    process using /proc on Solaris.  */
  44
  45 #if PR_MODEL_NATIVE == PR_MODEL_LP64
  46
  47 #include "amd64-nat.h"
  48 #include "amd64-tdep.h"
  49
  50 /* Mapping between the general-purpose registers in gregset_t format
  51    and GDB's register cache layout.  */
  52
  53 /* From <sys/regset.h>.  */
  54 static int amd64_sol2_gregset64_reg_offset[] = {
  55   14 * 8,                       /* %rax */
  56   11 * 8,                       /* %rbx */
  57   13 * 8,                       /* %rcx */
  58   12 * 8,                       /* %rdx */
  59   9 * 8,                        /* %rsi */
  60   8 * 8,                        /* %rdi */
  61   10 * 8,                       /* %rbp */
  62   20 * 8,                       /* %rsp */
  63   7 * 8,                        /* %r8 ...  */
  64   6 * 8,
  65   5 * 8,
  66   4 * 8,
  67   3 * 8,
  68   2 * 8,
  69   1 * 8,
  70   0 * 8,                        /* ... %r15 */
  71   17 * 8,                       /* %rip */
  72   19 * 8,                       /* %eflags */
  73   18 * 8,                       /* %cs */
  74   21 * 8,                       /* %ss */
  75   25 * 8,                       /* %ds */
  76   24 * 8,                       /* %es */
  77   22 * 8,                       /* %fs */
  78   23 * 8                        /* %gs */
  79 };
  80
  81 /* 32-bit registers are provided by Solaris in 64-bit format, so just
  82    give a subset of the list above.  */
  83 static int amd64_sol2_gregset32_reg_offset[] = {
  84   14 * 8,                       /* %eax */
  85   13 * 8,                       /* %ecx */
  86   12 * 8,                       /* %edx */
  87   11 * 8,                       /* %ebx */
  88   20 * 8,                       /* %esp */
  89   10 * 8,                       /* %ebp */
  90   9 * 8,                        /* %esi */
  91   8 * 8,                        /* %edi */
  92   17 * 8,                       /* %eip */
  93   19 * 8,                       /* %eflags */
  94   18 * 8,                       /* %cs */
  95   21 * 8,                       /* %ss */
  96   25 * 8,                       /* %ds */
  97   24 * 8,                       /* %es */
  98   22 * 8,                       /* %fs */
  99   23 * 8                        /* %gs */
 100 };
 101
 102 void
 103 supply_gregset (struct regcache *regcache, const prgregset_t *gregs)
 104 {
 105   amd64_supply_native_gregset (regcache, gregs, -1);
 106 }
 107
 108 void
 109 supply_fpregset (struct regcache *regcache, const prfpregset_t *fpregs)
 110 {
 111   amd64_supply_fxsave (regcache, -1, fpregs);
 112 }
 113
 114 void
 115 fill_gregset (const struct regcache *regcache,
 116               prgregset_t *gregs, int regnum)
 117 {
 118   amd64_collect_native_gregset (regcache, gregs, regnum);
 119 }
 120
 121 void
 122 fill_fpregset (const struct regcache *regcache,
 123                prfpregset_t *fpregs, int regnum)
 124 {
 125   amd64_collect_fxsave (regcache, regnum, fpregs);
 126 }
 127
 128 #else /* PR_MODEL_NATIVE != PR_MODEL_LP64 */
 129
 130 #include "i386-tdep.h"
 131 #include "i387-tdep.h"
 132
 133 /* The `/proc' interface divides the target machine's register set up
 134    into two different sets, the general purpose register set (gregset)
 135    and the floating-point register set (fpregset).
 136
 137    The actual structure is, of course, naturally machine dependent, and is
 138    different for each set of registers.  For the i386 for example, the
 139    general-purpose register set is typically defined by:
 140
 141    typedef int gregset_t[19];           (in <sys/regset.h>)
 142
 143    #define GS   0                       (in <sys/reg.h>)
 144    #define FS   1
 145    ...
 146    #define UESP 17
 147    #define SS   18
 148
 149    and the floating-point set by:
 150
 151    typedef struct fpregset   {
 152            union {
 153                    struct fpchip_state            // fp extension state //
 154                    {
 155                            int     state[27];     // 287/387 saved state //
 156                            int     status;        // status word saved at //
 157                                                   // exception //
 158                    } fpchip_state;
 159                    struct fp_emul_space           // for emulators //
 160                    {
 161                            char    fp_emul[246];
 162                            char    fp_epad[2];
 163                    } fp_emul_space;
 164                    int     f_fpregs[62];          // union of the above //
 165            } fp_reg_set;
 166            long            f_wregs[33];           // saved weitek state //
 167    } fpregset_t;
 168
 169    Incidentally fpchip_state contains the FPU state in the same format
 170    as used by the "fsave" instruction, and that's the only thing we
 171    support here.  I don't know how the emulator stores it state.  The
 172    Weitek stuff definitely isn't supported.
 173
 174    The routines defined here, provide the packing and unpacking of
 175    gregset_t and fpregset_t formatted data.  */
 176
 177 /* Mapping between the general-purpose registers in `/proc'
 178    format and GDB's register array layout.  */
 179 static int regmap[] =
 180 {
 181   11    /* EAX */,
 182   10    /* ECX */,
 183   9     /* EDX */,
 184   8     /* EBX */,
 185   17    /* UESP */,
 186   6     /* EBP */,
 187   5     /* ESI */,
 188   4     /* EDI */,
 189   14    /* EIP */,
 190   16    /* EFL */,
 191   15    /* CS */,
 192   18    /* SS */,
 193   3     /* DS */,
 194   2     /* ES */,
 195   1     /* FS */,
 196   0     /* GS */
 197 };
 198
 199 /* Fill GDB's register array with the general-purpose register values
 200    in *GREGSETP.  */
 201
 202 void
 203 supply_gregset (struct regcache *regcache, const gregset_t *gregsetp)
 204 {
 205   const greg_t *regp = (const greg_t *) gregsetp;
 206   int regnum;
 207
 208   for (regnum = 0; regnum < I386_NUM_GREGS; regnum++)
 209     regcache->raw_supply (regnum, regp + regmap[regnum]);
 210 }
 211
 212 /* Fill register REGNUM (if it is a general-purpose register) in
 213    *GREGSETPS with the value in GDB's register array.  If REGNUM is -1,
 214    do this for all registers.  */
 215
 216 void
 217 fill_gregset (const struct regcache *regcache,
 218               gregset_t *gregsetp, int regnum)
 219 {
 220   greg_t *regp = (greg_t *) gregsetp;
 221   int i;
 222
 223   for (i = 0; i < I386_NUM_GREGS; i++)
 224     if (regnum == -1 || regnum == i)
 225       regcache->raw_collect (i, regp + regmap[i]);
 226 }
 227
 228 /* Fill GDB's register array with the floating-point register values in
 229    *FPREGSETP.  */
 230
 231 void
 232 supply_fpregset (struct regcache *regcache, const fpregset_t *fpregsetp)
 233 {
 234   if (gdbarch_fp0_regnum (regcache->arch ()) == 0)
 235     return;
 236
 237   i387_supply_fsave (regcache, -1, fpregsetp);
 238 }
 239
 240 /* Fill register REGNO (if it is a floating-point register) in
 241    *FPREGSETP with the value in GDB's register array.  If REGNO is -1,
 242    do this for all registers.  */
 243
 244 void
 245 fill_fpregset (const struct regcache *regcache,
 246                fpregset_t *fpregsetp, int regno)
 247 {
 248   if (gdbarch_fp0_regnum (regcache->arch ()) == 0)
 249     return;
 250
 251   i387_collect_fsave (regcache, regno, fpregsetp);
 252 }
 253
 254 #endif
 255
 256 void _initialize_amd64_sol2_nat ();
 257 void
 258 _initialize_amd64_sol2_nat ()
 259 {
 260 #if PR_MODEL_NATIVE == PR_MODEL_LP64
 261   amd64_native_gregset32_reg_offset = amd64_sol2_gregset32_reg_offset;
 262   amd64_native_gregset32_num_regs =
 263     ARRAY_SIZE (amd64_sol2_gregset32_reg_offset);
 264   amd64_native_gregset64_reg_offset = amd64_sol2_gregset64_reg_offset;
 265   amd64_native_gregset64_num_regs =
 266     ARRAY_SIZE (amd64_sol2_gregset64_reg_offset);
 267 #endif
 268 }