[GAS][ARM] Fix ARMv8.1 AdvSIMD testism
[binutils-gdb.git] / gdb / solib-frv.c
blob6ebc6d4b520e58cf921656395b6bdadbaf7cecad
1 /* Handle FR-V (FDPIC) shared libraries for GDB, the GNU Debugger.
2 Copyright (C) 2004-2018 Free Software Foundation, Inc.
4 This file is part of GDB.
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 3 of the License, or
9 (at your option) any later version.
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program. If not, see <http://www.gnu.org/licenses/>. */
20 #include "defs.h"
21 #include "inferior.h"
22 #include "gdbcore.h"
23 #include "solib.h"
24 #include "solist.h"
25 #include "frv-tdep.h"
26 #include "objfiles.h"
27 #include "symtab.h"
28 #include "language.h"
29 #include "command.h"
30 #include "gdbcmd.h"
31 #include "elf/frv.h"
32 #include "gdb_bfd.h"
34 /* Flag which indicates whether internal debug messages should be printed. */
35 static unsigned int solib_frv_debug;
37 /* FR-V pointers are four bytes wide. */
38 enum { FRV_PTR_SIZE = 4 };
40 /* Representation of loadmap and related structs for the FR-V FDPIC ABI. */
42 /* External versions; the size and alignment of the fields should be
43 the same as those on the target. When loaded, the placement of
44 the bits in each field will be the same as on the target. */
45 typedef gdb_byte ext_Elf32_Half[2];
46 typedef gdb_byte ext_Elf32_Addr[4];
47 typedef gdb_byte ext_Elf32_Word[4];
49 struct ext_elf32_fdpic_loadseg
51 /* Core address to which the segment is mapped. */
52 ext_Elf32_Addr addr;
53 /* VMA recorded in the program header. */
54 ext_Elf32_Addr p_vaddr;
55 /* Size of this segment in memory. */
56 ext_Elf32_Word p_memsz;
59 struct ext_elf32_fdpic_loadmap {
60 /* Protocol version number, must be zero. */
61 ext_Elf32_Half version;
62 /* Number of segments in this map. */
63 ext_Elf32_Half nsegs;
64 /* The actual memory map. */
65 struct ext_elf32_fdpic_loadseg segs[1 /* nsegs, actually */];
68 /* Internal versions; the types are GDB types and the data in each
69 of the fields is (or will be) decoded from the external struct
70 for ease of consumption. */
71 struct int_elf32_fdpic_loadseg
73 /* Core address to which the segment is mapped. */
74 CORE_ADDR addr;
75 /* VMA recorded in the program header. */
76 CORE_ADDR p_vaddr;
77 /* Size of this segment in memory. */
78 long p_memsz;
81 struct int_elf32_fdpic_loadmap {
82 /* Protocol version number, must be zero. */
83 int version;
84 /* Number of segments in this map. */
85 int nsegs;
86 /* The actual memory map. */
87 struct int_elf32_fdpic_loadseg segs[1 /* nsegs, actually */];
90 /* Given address LDMADDR, fetch and decode the loadmap at that address.
91 Return NULL if there is a problem reading the target memory or if
92 there doesn't appear to be a loadmap at the given address. The
93 allocated space (representing the loadmap) returned by this
94 function may be freed via a single call to xfree(). */
96 static struct int_elf32_fdpic_loadmap *
97 fetch_loadmap (CORE_ADDR ldmaddr)
99 enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
100 struct ext_elf32_fdpic_loadmap ext_ldmbuf_partial;
101 struct ext_elf32_fdpic_loadmap *ext_ldmbuf;
102 struct int_elf32_fdpic_loadmap *int_ldmbuf;
103 int ext_ldmbuf_size, int_ldmbuf_size;
104 int version, seg, nsegs;
106 /* Fetch initial portion of the loadmap. */
107 if (target_read_memory (ldmaddr, (gdb_byte *) &ext_ldmbuf_partial,
108 sizeof ext_ldmbuf_partial))
110 /* Problem reading the target's memory. */
111 return NULL;
114 /* Extract the version. */
115 version = extract_unsigned_integer (ext_ldmbuf_partial.version,
116 sizeof ext_ldmbuf_partial.version,
117 byte_order);
118 if (version != 0)
120 /* We only handle version 0. */
121 return NULL;
124 /* Extract the number of segments. */
125 nsegs = extract_unsigned_integer (ext_ldmbuf_partial.nsegs,
126 sizeof ext_ldmbuf_partial.nsegs,
127 byte_order);
129 if (nsegs <= 0)
130 return NULL;
132 /* Allocate space for the complete (external) loadmap. */
133 ext_ldmbuf_size = sizeof (struct ext_elf32_fdpic_loadmap)
134 + (nsegs - 1) * sizeof (struct ext_elf32_fdpic_loadseg);
135 ext_ldmbuf = (struct ext_elf32_fdpic_loadmap *) xmalloc (ext_ldmbuf_size);
137 /* Copy over the portion of the loadmap that's already been read. */
138 memcpy (ext_ldmbuf, &ext_ldmbuf_partial, sizeof ext_ldmbuf_partial);
140 /* Read the rest of the loadmap from the target. */
141 if (target_read_memory (ldmaddr + sizeof ext_ldmbuf_partial,
142 (gdb_byte *) ext_ldmbuf + sizeof ext_ldmbuf_partial,
143 ext_ldmbuf_size - sizeof ext_ldmbuf_partial))
145 /* Couldn't read rest of the loadmap. */
146 xfree (ext_ldmbuf);
147 return NULL;
150 /* Allocate space into which to put information extract from the
151 external loadsegs. I.e, allocate the internal loadsegs. */
152 int_ldmbuf_size = sizeof (struct int_elf32_fdpic_loadmap)
153 + (nsegs - 1) * sizeof (struct int_elf32_fdpic_loadseg);
154 int_ldmbuf = (struct int_elf32_fdpic_loadmap *) xmalloc (int_ldmbuf_size);
156 /* Place extracted information in internal structs. */
157 int_ldmbuf->version = version;
158 int_ldmbuf->nsegs = nsegs;
159 for (seg = 0; seg < nsegs; seg++)
161 int_ldmbuf->segs[seg].addr
162 = extract_unsigned_integer (ext_ldmbuf->segs[seg].addr,
163 sizeof (ext_ldmbuf->segs[seg].addr),
164 byte_order);
165 int_ldmbuf->segs[seg].p_vaddr
166 = extract_unsigned_integer (ext_ldmbuf->segs[seg].p_vaddr,
167 sizeof (ext_ldmbuf->segs[seg].p_vaddr),
168 byte_order);
169 int_ldmbuf->segs[seg].p_memsz
170 = extract_unsigned_integer (ext_ldmbuf->segs[seg].p_memsz,
171 sizeof (ext_ldmbuf->segs[seg].p_memsz),
172 byte_order);
175 xfree (ext_ldmbuf);
176 return int_ldmbuf;
179 /* External link_map and elf32_fdpic_loadaddr struct definitions. */
181 typedef gdb_byte ext_ptr[4];
183 struct ext_elf32_fdpic_loadaddr
185 ext_ptr map; /* struct elf32_fdpic_loadmap *map; */
186 ext_ptr got_value; /* void *got_value; */
189 struct ext_link_map
191 struct ext_elf32_fdpic_loadaddr l_addr;
193 /* Absolute file name object was found in. */
194 ext_ptr l_name; /* char *l_name; */
196 /* Dynamic section of the shared object. */
197 ext_ptr l_ld; /* ElfW(Dyn) *l_ld; */
199 /* Chain of loaded objects. */
200 ext_ptr l_next, l_prev; /* struct link_map *l_next, *l_prev; */
203 /* Link map info to include in an allocated so_list entry. */
205 struct lm_info_frv : public lm_info_base
207 ~lm_info_frv ()
209 xfree (this->map);
210 xfree (this->dyn_syms);
211 xfree (this->dyn_relocs);
214 /* The loadmap, digested into an easier to use form. */
215 int_elf32_fdpic_loadmap *map = NULL;
216 /* The GOT address for this link map entry. */
217 CORE_ADDR got_value = 0;
218 /* The link map address, needed for frv_fetch_objfile_link_map(). */
219 CORE_ADDR lm_addr = 0;
221 /* Cached dynamic symbol table and dynamic relocs initialized and
222 used only by find_canonical_descriptor_in_load_object().
224 Note: kevinb/2004-02-26: It appears that calls to
225 bfd_canonicalize_dynamic_reloc() will use the same symbols as
226 those supplied to the first call to this function. Therefore,
227 it's important to NOT free the asymbol ** data structure
228 supplied to the first call. Thus the caching of the dynamic
229 symbols (dyn_syms) is critical for correct operation. The
230 caching of the dynamic relocations could be dispensed with. */
231 asymbol **dyn_syms = NULL;
232 arelent **dyn_relocs = NULL;
233 int dyn_reloc_count = 0; /* Number of dynamic relocs. */
236 /* The load map, got value, etc. are not available from the chain
237 of loaded shared objects. ``main_executable_lm_info'' provides
238 a way to get at this information so that it doesn't need to be
239 frequently recomputed. Initialized by frv_relocate_main_executable(). */
240 static lm_info_frv *main_executable_lm_info;
242 static void frv_relocate_main_executable (void);
243 static CORE_ADDR main_got (void);
244 static int enable_break2 (void);
246 /* Implement the "open_symbol_file_object" target_so_ops method. */
248 static int
249 open_symbol_file_object (int from_tty)
251 /* Unimplemented. */
252 return 0;
255 /* Cached value for lm_base(), below. */
256 static CORE_ADDR lm_base_cache = 0;
258 /* Link map address for main module. */
259 static CORE_ADDR main_lm_addr = 0;
261 /* Return the address from which the link map chain may be found. On
262 the FR-V, this may be found in a number of ways. Assuming that the
263 main executable has already been relocated, the easiest way to find
264 this value is to look up the address of _GLOBAL_OFFSET_TABLE_. A
265 pointer to the start of the link map will be located at the word found
266 at _GLOBAL_OFFSET_TABLE_ + 8. (This is part of the dynamic linker
267 reserve area mandated by the ABI.) */
269 static CORE_ADDR
270 lm_base (void)
272 enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
273 struct bound_minimal_symbol got_sym;
274 CORE_ADDR addr;
275 gdb_byte buf[FRV_PTR_SIZE];
277 /* One of our assumptions is that the main executable has been relocated.
278 Bail out if this has not happened. (Note that post_create_inferior()
279 in infcmd.c will call solib_add prior to solib_create_inferior_hook().
280 If we allow this to happen, lm_base_cache will be initialized with
281 a bogus value. */
282 if (main_executable_lm_info == 0)
283 return 0;
285 /* If we already have a cached value, return it. */
286 if (lm_base_cache)
287 return lm_base_cache;
289 got_sym = lookup_minimal_symbol ("_GLOBAL_OFFSET_TABLE_", NULL,
290 symfile_objfile);
291 if (got_sym.minsym == 0)
293 if (solib_frv_debug)
294 fprintf_unfiltered (gdb_stdlog,
295 "lm_base: _GLOBAL_OFFSET_TABLE_ not found.\n");
296 return 0;
299 addr = BMSYMBOL_VALUE_ADDRESS (got_sym) + 8;
301 if (solib_frv_debug)
302 fprintf_unfiltered (gdb_stdlog,
303 "lm_base: _GLOBAL_OFFSET_TABLE_ + 8 = %s\n",
304 hex_string_custom (addr, 8));
306 if (target_read_memory (addr, buf, sizeof buf) != 0)
307 return 0;
308 lm_base_cache = extract_unsigned_integer (buf, sizeof buf, byte_order);
310 if (solib_frv_debug)
311 fprintf_unfiltered (gdb_stdlog,
312 "lm_base: lm_base_cache = %s\n",
313 hex_string_custom (lm_base_cache, 8));
315 return lm_base_cache;
319 /* Implement the "current_sos" target_so_ops method. */
321 static struct so_list *
322 frv_current_sos (void)
324 enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
325 CORE_ADDR lm_addr, mgot;
326 struct so_list *sos_head = NULL;
327 struct so_list **sos_next_ptr = &sos_head;
329 /* Make sure that the main executable has been relocated. This is
330 required in order to find the address of the global offset table,
331 which in turn is used to find the link map info. (See lm_base()
332 for details.)
334 Note that the relocation of the main executable is also performed
335 by solib_create_inferior_hook(), however, in the case of core
336 files, this hook is called too late in order to be of benefit to
337 solib_add. solib_add eventually calls this this function,
338 frv_current_sos, and also precedes the call to
339 solib_create_inferior_hook(). (See post_create_inferior() in
340 infcmd.c.) */
341 if (main_executable_lm_info == 0 && core_bfd != NULL)
342 frv_relocate_main_executable ();
344 /* Fetch the GOT corresponding to the main executable. */
345 mgot = main_got ();
347 /* Locate the address of the first link map struct. */
348 lm_addr = lm_base ();
350 /* We have at least one link map entry. Fetch the lot of them,
351 building the solist chain. */
352 while (lm_addr)
354 struct ext_link_map lm_buf;
355 CORE_ADDR got_addr;
357 if (solib_frv_debug)
358 fprintf_unfiltered (gdb_stdlog,
359 "current_sos: reading link_map entry at %s\n",
360 hex_string_custom (lm_addr, 8));
362 if (target_read_memory (lm_addr, (gdb_byte *) &lm_buf,
363 sizeof (lm_buf)) != 0)
365 warning (_("frv_current_sos: Unable to read link map entry. "
366 "Shared object chain may be incomplete."));
367 break;
370 got_addr
371 = extract_unsigned_integer (lm_buf.l_addr.got_value,
372 sizeof (lm_buf.l_addr.got_value),
373 byte_order);
374 /* If the got_addr is the same as mgotr, then we're looking at the
375 entry for the main executable. By convention, we don't include
376 this in the list of shared objects. */
377 if (got_addr != mgot)
379 int errcode;
380 gdb::unique_xmalloc_ptr<char> name_buf;
381 struct int_elf32_fdpic_loadmap *loadmap;
382 struct so_list *sop;
383 CORE_ADDR addr;
385 /* Fetch the load map address. */
386 addr = extract_unsigned_integer (lm_buf.l_addr.map,
387 sizeof lm_buf.l_addr.map,
388 byte_order);
389 loadmap = fetch_loadmap (addr);
390 if (loadmap == NULL)
392 warning (_("frv_current_sos: Unable to fetch load map. "
393 "Shared object chain may be incomplete."));
394 break;
397 sop = XCNEW (struct so_list);
398 lm_info_frv *li = new lm_info_frv;
399 sop->lm_info = li;
400 li->map = loadmap;
401 li->got_value = got_addr;
402 li->lm_addr = lm_addr;
403 /* Fetch the name. */
404 addr = extract_unsigned_integer (lm_buf.l_name,
405 sizeof (lm_buf.l_name),
406 byte_order);
407 target_read_string (addr, &name_buf, SO_NAME_MAX_PATH_SIZE - 1,
408 &errcode);
410 if (solib_frv_debug)
411 fprintf_unfiltered (gdb_stdlog, "current_sos: name = %s\n",
412 name_buf.get ());
414 if (errcode != 0)
415 warning (_("Can't read pathname for link map entry: %s."),
416 safe_strerror (errcode));
417 else
419 strncpy (sop->so_name, name_buf.get (),
420 SO_NAME_MAX_PATH_SIZE - 1);
421 sop->so_name[SO_NAME_MAX_PATH_SIZE - 1] = '\0';
422 strcpy (sop->so_original_name, sop->so_name);
425 *sos_next_ptr = sop;
426 sos_next_ptr = &sop->next;
428 else
430 main_lm_addr = lm_addr;
433 lm_addr = extract_unsigned_integer (lm_buf.l_next,
434 sizeof (lm_buf.l_next), byte_order);
437 enable_break2 ();
439 return sos_head;
443 /* Return 1 if PC lies in the dynamic symbol resolution code of the
444 run time loader. */
446 static CORE_ADDR interp_text_sect_low;
447 static CORE_ADDR interp_text_sect_high;
448 static CORE_ADDR interp_plt_sect_low;
449 static CORE_ADDR interp_plt_sect_high;
451 static int
452 frv_in_dynsym_resolve_code (CORE_ADDR pc)
454 return ((pc >= interp_text_sect_low && pc < interp_text_sect_high)
455 || (pc >= interp_plt_sect_low && pc < interp_plt_sect_high)
456 || in_plt_section (pc));
459 /* Given a loadmap and an address, return the displacement needed
460 to relocate the address. */
462 static CORE_ADDR
463 displacement_from_map (struct int_elf32_fdpic_loadmap *map,
464 CORE_ADDR addr)
466 int seg;
468 for (seg = 0; seg < map->nsegs; seg++)
470 if (map->segs[seg].p_vaddr <= addr
471 && addr < map->segs[seg].p_vaddr + map->segs[seg].p_memsz)
473 return map->segs[seg].addr - map->segs[seg].p_vaddr;
477 return 0;
480 /* Print a warning about being unable to set the dynamic linker
481 breakpoint. */
483 static void
484 enable_break_failure_warning (void)
486 warning (_("Unable to find dynamic linker breakpoint function.\n"
487 "GDB will be unable to debug shared library initializers\n"
488 "and track explicitly loaded dynamic code."));
491 /* Helper function for gdb_bfd_lookup_symbol. */
493 static int
494 cmp_name (const asymbol *sym, const void *data)
496 return (strcmp (sym->name, (const char *) data) == 0);
499 /* Arrange for dynamic linker to hit breakpoint.
501 The dynamic linkers has, as part of its debugger interface, support
502 for arranging for the inferior to hit a breakpoint after mapping in
503 the shared libraries. This function enables that breakpoint.
505 On the FR-V, using the shared library (FDPIC) ABI, the symbol
506 _dl_debug_addr points to the r_debug struct which contains
507 a field called r_brk. r_brk is the address of the function
508 descriptor upon which a breakpoint must be placed. Being a
509 function descriptor, we must extract the entry point in order
510 to set the breakpoint.
512 Our strategy will be to get the .interp section from the
513 executable. This section will provide us with the name of the
514 interpreter. We'll open the interpreter and then look up
515 the address of _dl_debug_addr. We then relocate this address
516 using the interpreter's loadmap. Once the relocated address
517 is known, we fetch the value (address) corresponding to r_brk
518 and then use that value to fetch the entry point of the function
519 we're interested in. */
521 static int enable_break2_done = 0;
523 static int
524 enable_break2 (void)
526 enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
527 asection *interp_sect;
529 if (enable_break2_done)
530 return 1;
532 interp_text_sect_low = interp_text_sect_high = 0;
533 interp_plt_sect_low = interp_plt_sect_high = 0;
535 /* Find the .interp section; if not found, warn the user and drop
536 into the old breakpoint at symbol code. */
537 interp_sect = bfd_get_section_by_name (exec_bfd, ".interp");
538 if (interp_sect)
540 unsigned int interp_sect_size;
541 char *buf;
542 int status;
543 CORE_ADDR addr, interp_loadmap_addr;
544 gdb_byte addr_buf[FRV_PTR_SIZE];
545 struct int_elf32_fdpic_loadmap *ldm;
547 /* Read the contents of the .interp section into a local buffer;
548 the contents specify the dynamic linker this program uses. */
549 interp_sect_size = bfd_section_size (exec_bfd, interp_sect);
550 buf = (char *) alloca (interp_sect_size);
551 bfd_get_section_contents (exec_bfd, interp_sect,
552 buf, 0, interp_sect_size);
554 /* Now we need to figure out where the dynamic linker was
555 loaded so that we can load its symbols and place a breakpoint
556 in the dynamic linker itself.
558 This address is stored on the stack. However, I've been unable
559 to find any magic formula to find it for Solaris (appears to
560 be trivial on GNU/Linux). Therefore, we have to try an alternate
561 mechanism to find the dynamic linker's base address. */
563 gdb_bfd_ref_ptr tmp_bfd;
566 tmp_bfd = solib_bfd_open (buf);
568 CATCH (ex, RETURN_MASK_ALL)
571 END_CATCH
573 if (tmp_bfd == NULL)
575 enable_break_failure_warning ();
576 return 0;
579 status = frv_fdpic_loadmap_addresses (target_gdbarch (),
580 &interp_loadmap_addr, 0);
581 if (status < 0)
583 warning (_("Unable to determine dynamic linker loadmap address."));
584 enable_break_failure_warning ();
585 return 0;
588 if (solib_frv_debug)
589 fprintf_unfiltered (gdb_stdlog,
590 "enable_break: interp_loadmap_addr = %s\n",
591 hex_string_custom (interp_loadmap_addr, 8));
593 ldm = fetch_loadmap (interp_loadmap_addr);
594 if (ldm == NULL)
596 warning (_("Unable to load dynamic linker loadmap at address %s."),
597 hex_string_custom (interp_loadmap_addr, 8));
598 enable_break_failure_warning ();
599 return 0;
602 /* Record the relocated start and end address of the dynamic linker
603 text and plt section for svr4_in_dynsym_resolve_code. */
604 interp_sect = bfd_get_section_by_name (tmp_bfd.get (), ".text");
605 if (interp_sect)
607 interp_text_sect_low
608 = bfd_section_vma (tmp_bfd.get (), interp_sect);
609 interp_text_sect_low
610 += displacement_from_map (ldm, interp_text_sect_low);
611 interp_text_sect_high
612 = interp_text_sect_low + bfd_section_size (tmp_bfd.get (),
613 interp_sect);
615 interp_sect = bfd_get_section_by_name (tmp_bfd.get (), ".plt");
616 if (interp_sect)
618 interp_plt_sect_low =
619 bfd_section_vma (tmp_bfd.get (), interp_sect);
620 interp_plt_sect_low
621 += displacement_from_map (ldm, interp_plt_sect_low);
622 interp_plt_sect_high =
623 interp_plt_sect_low + bfd_section_size (tmp_bfd.get (),
624 interp_sect);
627 addr = gdb_bfd_lookup_symbol (tmp_bfd.get (), cmp_name, "_dl_debug_addr");
629 if (addr == 0)
631 warning (_("Could not find symbol _dl_debug_addr "
632 "in dynamic linker"));
633 enable_break_failure_warning ();
634 return 0;
637 if (solib_frv_debug)
638 fprintf_unfiltered (gdb_stdlog,
639 "enable_break: _dl_debug_addr "
640 "(prior to relocation) = %s\n",
641 hex_string_custom (addr, 8));
643 addr += displacement_from_map (ldm, addr);
645 if (solib_frv_debug)
646 fprintf_unfiltered (gdb_stdlog,
647 "enable_break: _dl_debug_addr "
648 "(after relocation) = %s\n",
649 hex_string_custom (addr, 8));
651 /* Fetch the address of the r_debug struct. */
652 if (target_read_memory (addr, addr_buf, sizeof addr_buf) != 0)
654 warning (_("Unable to fetch contents of _dl_debug_addr "
655 "(at address %s) from dynamic linker"),
656 hex_string_custom (addr, 8));
658 addr = extract_unsigned_integer (addr_buf, sizeof addr_buf, byte_order);
660 if (solib_frv_debug)
661 fprintf_unfiltered (gdb_stdlog,
662 "enable_break: _dl_debug_addr[0..3] = %s\n",
663 hex_string_custom (addr, 8));
665 /* If it's zero, then the ldso hasn't initialized yet, and so
666 there are no shared libs yet loaded. */
667 if (addr == 0)
669 if (solib_frv_debug)
670 fprintf_unfiltered (gdb_stdlog,
671 "enable_break: ldso not yet initialized\n");
672 /* Do not warn, but mark to run again. */
673 return 0;
676 /* Fetch the r_brk field. It's 8 bytes from the start of
677 _dl_debug_addr. */
678 if (target_read_memory (addr + 8, addr_buf, sizeof addr_buf) != 0)
680 warning (_("Unable to fetch _dl_debug_addr->r_brk "
681 "(at address %s) from dynamic linker"),
682 hex_string_custom (addr + 8, 8));
683 enable_break_failure_warning ();
684 return 0;
686 addr = extract_unsigned_integer (addr_buf, sizeof addr_buf, byte_order);
688 /* Now fetch the function entry point. */
689 if (target_read_memory (addr, addr_buf, sizeof addr_buf) != 0)
691 warning (_("Unable to fetch _dl_debug_addr->.r_brk entry point "
692 "(at address %s) from dynamic linker"),
693 hex_string_custom (addr, 8));
694 enable_break_failure_warning ();
695 return 0;
697 addr = extract_unsigned_integer (addr_buf, sizeof addr_buf, byte_order);
699 /* We're done with the loadmap. */
700 xfree (ldm);
702 /* Remove all the solib event breakpoints. Their addresses
703 may have changed since the last time we ran the program. */
704 remove_solib_event_breakpoints ();
706 /* Now (finally!) create the solib breakpoint. */
707 create_solib_event_breakpoint (target_gdbarch (), addr);
709 enable_break2_done = 1;
711 return 1;
714 /* Tell the user we couldn't set a dynamic linker breakpoint. */
715 enable_break_failure_warning ();
717 /* Failure return. */
718 return 0;
721 static int
722 enable_break (void)
724 asection *interp_sect;
725 CORE_ADDR entry_point;
727 if (symfile_objfile == NULL)
729 if (solib_frv_debug)
730 fprintf_unfiltered (gdb_stdlog,
731 "enable_break: No symbol file found.\n");
732 return 0;
735 if (!entry_point_address_query (&entry_point))
737 if (solib_frv_debug)
738 fprintf_unfiltered (gdb_stdlog,
739 "enable_break: Symbol file has no entry point.\n");
740 return 0;
743 /* Check for the presence of a .interp section. If there is no
744 such section, the executable is statically linked. */
746 interp_sect = bfd_get_section_by_name (exec_bfd, ".interp");
748 if (interp_sect == NULL)
750 if (solib_frv_debug)
751 fprintf_unfiltered (gdb_stdlog,
752 "enable_break: No .interp section found.\n");
753 return 0;
756 create_solib_event_breakpoint (target_gdbarch (), entry_point);
758 if (solib_frv_debug)
759 fprintf_unfiltered (gdb_stdlog,
760 "enable_break: solib event breakpoint "
761 "placed at entry point: %s\n",
762 hex_string_custom (entry_point, 8));
763 return 1;
766 static void
767 frv_relocate_main_executable (void)
769 int status;
770 CORE_ADDR exec_addr, interp_addr;
771 struct int_elf32_fdpic_loadmap *ldm;
772 int changed;
773 struct obj_section *osect;
775 status = frv_fdpic_loadmap_addresses (target_gdbarch (),
776 &interp_addr, &exec_addr);
778 if (status < 0 || (exec_addr == 0 && interp_addr == 0))
780 /* Not using FDPIC ABI, so do nothing. */
781 return;
784 /* Fetch the loadmap located at ``exec_addr''. */
785 ldm = fetch_loadmap (exec_addr);
786 if (ldm == NULL)
787 error (_("Unable to load the executable's loadmap."));
789 delete main_executable_lm_info;
790 main_executable_lm_info = new lm_info_frv;
791 main_executable_lm_info->map = ldm;
793 gdb::unique_xmalloc_ptr<struct section_offsets> new_offsets
794 (XCNEWVEC (struct section_offsets, symfile_objfile->num_sections));
795 changed = 0;
797 ALL_OBJFILE_OSECTIONS (symfile_objfile, osect)
799 CORE_ADDR orig_addr, addr, offset;
800 int osect_idx;
801 int seg;
803 osect_idx = osect - symfile_objfile->sections;
805 /* Current address of section. */
806 addr = obj_section_addr (osect);
807 /* Offset from where this section started. */
808 offset = ANOFFSET (symfile_objfile->section_offsets, osect_idx);
809 /* Original address prior to any past relocations. */
810 orig_addr = addr - offset;
812 for (seg = 0; seg < ldm->nsegs; seg++)
814 if (ldm->segs[seg].p_vaddr <= orig_addr
815 && orig_addr < ldm->segs[seg].p_vaddr + ldm->segs[seg].p_memsz)
817 new_offsets->offsets[osect_idx]
818 = ldm->segs[seg].addr - ldm->segs[seg].p_vaddr;
820 if (new_offsets->offsets[osect_idx] != offset)
821 changed = 1;
822 break;
827 if (changed)
828 objfile_relocate (symfile_objfile, new_offsets.get ());
830 /* Now that symfile_objfile has been relocated, we can compute the
831 GOT value and stash it away. */
832 main_executable_lm_info->got_value = main_got ();
835 /* Implement the "create_inferior_hook" target_solib_ops method.
837 For the FR-V shared library ABI (FDPIC), the main executable needs
838 to be relocated. The shared library breakpoints also need to be
839 enabled. */
841 static void
842 frv_solib_create_inferior_hook (int from_tty)
844 /* Relocate main executable. */
845 frv_relocate_main_executable ();
847 /* Enable shared library breakpoints. */
848 if (!enable_break ())
850 warning (_("shared library handler failed to enable breakpoint"));
851 return;
855 static void
856 frv_clear_solib (void)
858 lm_base_cache = 0;
859 enable_break2_done = 0;
860 main_lm_addr = 0;
862 delete main_executable_lm_info;
863 main_executable_lm_info = NULL;
866 static void
867 frv_free_so (struct so_list *so)
869 lm_info_frv *li = (lm_info_frv *) so->lm_info;
871 delete li;
874 static void
875 frv_relocate_section_addresses (struct so_list *so,
876 struct target_section *sec)
878 int seg;
879 lm_info_frv *li = (lm_info_frv *) so->lm_info;
880 int_elf32_fdpic_loadmap *map = li->map;
882 for (seg = 0; seg < map->nsegs; seg++)
884 if (map->segs[seg].p_vaddr <= sec->addr
885 && sec->addr < map->segs[seg].p_vaddr + map->segs[seg].p_memsz)
887 CORE_ADDR displ = map->segs[seg].addr - map->segs[seg].p_vaddr;
889 sec->addr += displ;
890 sec->endaddr += displ;
891 break;
896 /* Return the GOT address associated with the main executable. Return
897 0 if it can't be found. */
899 static CORE_ADDR
900 main_got (void)
902 struct bound_minimal_symbol got_sym;
904 got_sym = lookup_minimal_symbol ("_GLOBAL_OFFSET_TABLE_",
905 NULL, symfile_objfile);
906 if (got_sym.minsym == 0)
907 return 0;
909 return BMSYMBOL_VALUE_ADDRESS (got_sym);
912 /* Find the global pointer for the given function address ADDR. */
914 CORE_ADDR
915 frv_fdpic_find_global_pointer (CORE_ADDR addr)
917 struct so_list *so;
919 so = master_so_list ();
920 while (so)
922 int seg;
923 lm_info_frv *li = (lm_info_frv *) so->lm_info;
924 int_elf32_fdpic_loadmap *map = li->map;
926 for (seg = 0; seg < map->nsegs; seg++)
928 if (map->segs[seg].addr <= addr
929 && addr < map->segs[seg].addr + map->segs[seg].p_memsz)
930 return li->got_value;
933 so = so->next;
936 /* Didn't find it in any of the shared objects. So assume it's in the
937 main executable. */
938 return main_got ();
941 /* Forward declarations for frv_fdpic_find_canonical_descriptor(). */
942 static CORE_ADDR find_canonical_descriptor_in_load_object
943 (CORE_ADDR, CORE_ADDR, const char *, bfd *, lm_info_frv *);
945 /* Given a function entry point, attempt to find the canonical descriptor
946 associated with that entry point. Return 0 if no canonical descriptor
947 could be found. */
949 CORE_ADDR
950 frv_fdpic_find_canonical_descriptor (CORE_ADDR entry_point)
952 const char *name;
953 CORE_ADDR addr;
954 CORE_ADDR got_value;
955 struct symbol *sym;
957 /* Fetch the corresponding global pointer for the entry point. */
958 got_value = frv_fdpic_find_global_pointer (entry_point);
960 /* Attempt to find the name of the function. If the name is available,
961 it'll be used as an aid in finding matching functions in the dynamic
962 symbol table. */
963 sym = find_pc_function (entry_point);
964 if (sym == 0)
965 name = 0;
966 else
967 name = SYMBOL_LINKAGE_NAME (sym);
969 /* Check the main executable. */
970 addr = find_canonical_descriptor_in_load_object
971 (entry_point, got_value, name, symfile_objfile->obfd,
972 main_executable_lm_info);
974 /* If descriptor not found via main executable, check each load object
975 in list of shared objects. */
976 if (addr == 0)
978 struct so_list *so;
980 so = master_so_list ();
981 while (so)
983 lm_info_frv *li = (lm_info_frv *) so->lm_info;
985 addr = find_canonical_descriptor_in_load_object
986 (entry_point, got_value, name, so->abfd, li);
988 if (addr != 0)
989 break;
991 so = so->next;
995 return addr;
998 static CORE_ADDR
999 find_canonical_descriptor_in_load_object
1000 (CORE_ADDR entry_point, CORE_ADDR got_value, const char *name, bfd *abfd,
1001 lm_info_frv *lm)
1003 enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
1004 arelent *rel;
1005 unsigned int i;
1006 CORE_ADDR addr = 0;
1008 /* Nothing to do if no bfd. */
1009 if (abfd == 0)
1010 return 0;
1012 /* Nothing to do if no link map. */
1013 if (lm == 0)
1014 return 0;
1016 /* We want to scan the dynamic relocs for R_FRV_FUNCDESC relocations.
1017 (More about this later.) But in order to fetch the relocs, we
1018 need to first fetch the dynamic symbols. These symbols need to
1019 be cached due to the way that bfd_canonicalize_dynamic_reloc()
1020 works. (See the comments in the declaration of struct lm_info
1021 for more information.) */
1022 if (lm->dyn_syms == NULL)
1024 long storage_needed;
1025 unsigned int number_of_symbols;
1027 /* Determine amount of space needed to hold the dynamic symbol table. */
1028 storage_needed = bfd_get_dynamic_symtab_upper_bound (abfd);
1030 /* If there are no dynamic symbols, there's nothing to do. */
1031 if (storage_needed <= 0)
1032 return 0;
1034 /* Allocate space for the dynamic symbol table. */
1035 lm->dyn_syms = (asymbol **) xmalloc (storage_needed);
1037 /* Fetch the dynamic symbol table. */
1038 number_of_symbols = bfd_canonicalize_dynamic_symtab (abfd, lm->dyn_syms);
1040 if (number_of_symbols == 0)
1041 return 0;
1044 /* Fetch the dynamic relocations if not already cached. */
1045 if (lm->dyn_relocs == NULL)
1047 long storage_needed;
1049 /* Determine amount of space needed to hold the dynamic relocs. */
1050 storage_needed = bfd_get_dynamic_reloc_upper_bound (abfd);
1052 /* Bail out if there are no dynamic relocs. */
1053 if (storage_needed <= 0)
1054 return 0;
1056 /* Allocate space for the relocs. */
1057 lm->dyn_relocs = (arelent **) xmalloc (storage_needed);
1059 /* Fetch the dynamic relocs. */
1060 lm->dyn_reloc_count
1061 = bfd_canonicalize_dynamic_reloc (abfd, lm->dyn_relocs, lm->dyn_syms);
1064 /* Search the dynamic relocs. */
1065 for (i = 0; i < lm->dyn_reloc_count; i++)
1067 rel = lm->dyn_relocs[i];
1069 /* Relocs of interest are those which meet the following
1070 criteria:
1072 - the names match (assuming the caller could provide
1073 a name which matches ``entry_point'').
1074 - the relocation type must be R_FRV_FUNCDESC. Relocs
1075 of this type are used (by the dynamic linker) to
1076 look up the address of a canonical descriptor (allocating
1077 it if need be) and initializing the GOT entry referred
1078 to by the offset to the address of the descriptor.
1080 These relocs of interest may be used to obtain a
1081 candidate descriptor by first adjusting the reloc's
1082 address according to the link map and then dereferencing
1083 this address (which is a GOT entry) to obtain a descriptor
1084 address. */
1085 if ((name == 0 || strcmp (name, (*rel->sym_ptr_ptr)->name) == 0)
1086 && rel->howto->type == R_FRV_FUNCDESC)
1088 gdb_byte buf [FRV_PTR_SIZE];
1090 /* Compute address of address of candidate descriptor. */
1091 addr = rel->address + displacement_from_map (lm->map, rel->address);
1093 /* Fetch address of candidate descriptor. */
1094 if (target_read_memory (addr, buf, sizeof buf) != 0)
1095 continue;
1096 addr = extract_unsigned_integer (buf, sizeof buf, byte_order);
1098 /* Check for matching entry point. */
1099 if (target_read_memory (addr, buf, sizeof buf) != 0)
1100 continue;
1101 if (extract_unsigned_integer (buf, sizeof buf, byte_order)
1102 != entry_point)
1103 continue;
1105 /* Check for matching got value. */
1106 if (target_read_memory (addr + 4, buf, sizeof buf) != 0)
1107 continue;
1108 if (extract_unsigned_integer (buf, sizeof buf, byte_order)
1109 != got_value)
1110 continue;
1112 /* Match was successful! Exit loop. */
1113 break;
1117 return addr;
1120 /* Given an objfile, return the address of its link map. This value is
1121 needed for TLS support. */
1122 CORE_ADDR
1123 frv_fetch_objfile_link_map (struct objfile *objfile)
1125 struct so_list *so;
1127 /* Cause frv_current_sos() to be run if it hasn't been already. */
1128 if (main_lm_addr == 0)
1129 solib_add (0, 0, 1);
1131 /* frv_current_sos() will set main_lm_addr for the main executable. */
1132 if (objfile == symfile_objfile)
1133 return main_lm_addr;
1135 /* The other link map addresses may be found by examining the list
1136 of shared libraries. */
1137 for (so = master_so_list (); so; so = so->next)
1139 lm_info_frv *li = (lm_info_frv *) so->lm_info;
1141 if (so->objfile == objfile)
1142 return li->lm_addr;
1145 /* Not found! */
1146 return 0;
1149 struct target_so_ops frv_so_ops;
1151 void
1152 _initialize_frv_solib (void)
1154 frv_so_ops.relocate_section_addresses = frv_relocate_section_addresses;
1155 frv_so_ops.free_so = frv_free_so;
1156 frv_so_ops.clear_solib = frv_clear_solib;
1157 frv_so_ops.solib_create_inferior_hook = frv_solib_create_inferior_hook;
1158 frv_so_ops.current_sos = frv_current_sos;
1159 frv_so_ops.open_symbol_file_object = open_symbol_file_object;
1160 frv_so_ops.in_dynsym_resolve_code = frv_in_dynsym_resolve_code;
1161 frv_so_ops.bfd_open = solib_bfd_open;
1163 /* Debug this file's internals. */
1164 add_setshow_zuinteger_cmd ("solib-frv", class_maintenance,
1165 &solib_frv_debug, _("\
1166 Set internal debugging of shared library code for FR-V."), _("\
1167 Show internal debugging of shared library code for FR-V."), _("\
1168 When non-zero, FR-V solib specific internal debugging is enabled."),
1169 NULL,
1170 NULL, /* FIXME: i18n: */
1171 &setdebuglist, &showdebuglist);