| blob | 4b945c34f112c17cd3dae39172be6f05f5d120ff |
1 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
3 * mips-opc.c: Add FP_D to s.d instruction flags.
5 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
7 * m68k-opc.c (halt, pulse): Enable them on the 68060.
9 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
11 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
12 PC relative offset forms before the 15 bit forms. An assembler command
13 line option now chooses the default.
15 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
17 * d30v-opc.c (d30v_opcode_table): Set new flags bits
18 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
20 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
22 * configure: Only build libopcodes shared if --enable-shared's value
23 was `yes', or was set to `*opcodes*'.
24 * aclocal.m4: Likewise.
25 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
26 original source of this bit of code. It's not clear what the best fix
27 would be, though.
29 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
31 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
32 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
33 offset forms before the 15 bit forms, to default to the long forms.
35 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
37 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
39 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
41 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
42 symbol if none is present.
43 (print_insn_big_arm): Prevent examination of stored symbol if
44 none is present.
46 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
48 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
50 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
52 * disassemble.c: Remove disasm_symaddr() function.
54 * arm-dis.c: Use info->symbol instead of info->flags to determine
55 if disassmbly should be in Thumb or Arm mode.
57 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
59 * arm-dis.c: Add support for disassembling Thumb opcodes.
60 (print_insn_thumb): New function.
62 * disassemble.c (disasm_symaddr): New function.
64 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
65 (thumb_opcodes): Table of Thumb opcodes.
67 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
69 * m68k-opc.c (btst): Change Dd@s to Dd;b.
71 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
72 and 'v' as operand types.
74 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
76 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
77 <olivier.carmona@di.epfl.ch>.
78 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
79 which has a two word opcode with a one word argument.
81 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
83 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
84 unsigned, not signed.
85 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
87 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
89 * d10v-dis.c (print_operand):
90 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
92 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
94 * d10v-opc.c (OPERAND_FLAG): Split into:
95 (OPERAND_FFLAG, OPERAND_CFLAG) .
96 (FSRC): Split into:
97 (FFSRC, CFSRC).
99 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
101 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
102 field for all INSN_MACRO's.
103 * mips16-opc.c: same
105 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
107 * mips-opc.c (sync,cache): These are 3900 insns.
109 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
111 sh-opc.h (sh_table): Remove ftst/nan.
113 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
115 * mips-opc.c (ffc, ffs): Fix mask.
117 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
119 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
120 control registers.
122 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
124 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
125 (WR_HILO, RD_HILO, MOD_HILO): New macros.
127 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
129 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
130 (WR_HILO, RD_HILO, MOD_HILO): New macros.
132 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
134 * v850-dis.c (disassemble): Replace // with /* ... */
136 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
138 * sparc-opc.c: Add wr & rd for v9a asr's.
139 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
140 (v9a_asr_reg_names): New variable.
141 Patch from David Miller <davem@vger.rutgers.edu>.
143 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
145 * sparc-opc.c (v9notv9a): New insn type.
146 (IMPDEP): Move to the end to not conflict with edge8 et al.
147 Patch from David Miller <davem@vger.rutgers.edu>.
149 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
151 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
153 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
155 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
157 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
159 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
160 of disassemble_info structure to determine if an overlay address
161 has a matching symbol in low memory.
163 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
164 new symbol_at_address_func field in disassemble_info structure.
166 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
168 * v850-opc.c (extract_d22): Use signed arithmatic.
170 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
172 * mips-opc.c: Three op mult is not an ISA insn.
174 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
176 * mips-opc.c: Fix formatting.
178 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
180 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
181 than assuming that char is signed. Explicitly sign extend 16 bit
182 values, rather than assuming that short is 16 bits.
183 (OP_sI, OP_J, OP_DIR): Likewise.
185 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
187 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
188 system registers.
190 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
192 * v850-opc.c: Fix typo in comment.
194 * v850-dis.c (disassemble): Add test of processor type when
195 determining opcodes.
197 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
199 * configure.in: Use a diversion to set enable_shared before the
200 arguments are parsed.
201 * configure: Rebuild.
203 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
205 * m68k-opc.c (TBL1): Use ! rather than `.
206 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
208 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
210 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
212 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
214 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
215 for mcf5200.
217 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
218 * aclocal.m4: Rebuild with new libtool.
219 * configure: Rebuild.
221 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
223 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
225 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
227 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
229 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
231 * v850-opc.c (v850_opcodes): Further rearrangements.
233 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
235 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
237 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
239 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
240 parser to work.
242 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
244 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
246 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
248 * v850-opc.c: Initialise processors field of v850_opcode structure.
250 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
252 Merge changes from Martin Hunt:
254 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
256 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
257 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
258 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
260 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
262 * d30v-dis.c (print_insn): First operand of d*i (delayed
263 branch) instructions is relative.
265 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
266 (d30v_operand_table): Add IMM6S3 type.
267 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
269 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
270 and cmp instructions.
272 * d30v-opc.c: Correct entries for repeat*, and sat*.
273 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
274 types. Correct several formats.
276 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
278 * d30v-opc.c (pre_defined_registers): Change control registers.
280 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
281 SHORT_C2. Manual was incorrect.
283 * d30v-dis.c (lookup_opcode): Return value now indicates
284 if an opcode has a short and a long form. Used for deciding
285 to append a ".s" or ".l".
286 (print_insn): Append a ".s" to an instruction if it is
287 the short form and ".l" if it is a long form. Do not append
288 anything if the instruction has only one possible size.
290 * d30v-opc.c: Change mulx2h to require an even register.
291 New form: SHORT_A2; a SHORT_A form that needs an even
292 register as the first operand.
294 * d30v-dis.c (print_insn_d30v): Fix problem where the last
295 instruction was not being disassembled if there were an odd
296 number of instructions.
298 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
300 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
302 * v850-dis.c (disassemble): Improved display of register lists.
304 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
306 * sparc-opc.c (sparc_opcodes): Fix assembler args to
307 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
308 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
309 fandnot1s, fandnot2s.
311 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
313 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
315 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
317 * cgen-asm.c (cgen_parse_address): New argument resultp.
318 All callers updated.
319 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
321 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
323 * mn10200-dis.c (disassemble): PC relative instructions are
324 relative to the next instruction, not the current instruction.
326 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
328 * v850-dis.c (disassemble): Only signed extend values that are not
329 returned by extract functions.
330 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
332 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
334 * v850-opc.c: Update comments. Remove use of
335 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
337 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
339 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
341 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
343 * configure: Rebuilt with latest devo autoconf for NT support.
345 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
347 * v850-dis.c (disassemble): Use curly brace syntax for register
348 lists.
350 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
351 where r0 is being used as a destination register.
353 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
355 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
357 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
359 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
361 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
363 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
364 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
365 opcodes..
367 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
369 * configure (cgen_files): Add support for v850e target.
370 * configure.in (cgen_files): Add support for v850e target.
372 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
374 * configure (cgen_files): Add support for v850ea target.
375 * configure.in (cgen_files): Add support for v850ea target.
377 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
379 * configure.in (bfd_arc_arch): Add.
380 * configure: Rebuild.
381 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
382 * Makefile.in: Rebuild.
383 * arc-dis.c, arc-opc.c: New files.
384 * disassemble.c (ARCH_all): Define ARCH_arc.
385 (disassembler): Add ARC support.
387 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
389 * v850-dis.c (disassemble): Add support for v850EA instructions.
391 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
392 (v850_opcodes): Add v850EA instructions.
394 * v850-dis.c (disassemble): Add support for v850E instructions.
396 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
397 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
398 insert_spe, extract_spe): New Functions.
399 (v850_opcodes): Add v850E instructions.
401 * v850-opc.c: Reorganised and re-layed out to improve readability
402 and portability.
404 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
406 * configure: Rebuild with autoconf 2.12.1.
408 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
410 * aclocal.m4, configure: Rebuild with new automake patches.
412 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
414 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
415 * acinclude.m4: Just include acinclude.m4 from BFD.
416 * aclocal.m4, configure: Rebuild.
418 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
420 * Makefile.am: New file, based on old Makefile.in.
421 * acconfig.h: New file.
422 * acinclude.m4: New file.
423 * stamp-h.in: New file.
424 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
425 Removed shared library handling; now handled by libtool. Replace
426 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
427 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
428 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
429 handling in AC_OUTPUT.
430 * dep-in.sed: Change .o to .lo.
431 * Makefile.in: Now built with automake.
432 * aclocal.m4: Now built with aclocal.
433 * config.in, configure: Rebuild.
435 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
437 * mips-opc.c: Fix typo/thinko in "eret" instruction.
439 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
441 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
442 Make array const.
443 * sparc-dis.c (sorted_opcodes): New static local.
444 (struct opcode_hash): `opcode' is pointer to const element.
445 (build_hash): First arg is now table of sorted pointers.
446 (print_insn_sparc): Sort opcodes by sorting table of pointers.
447 (compare_opcodes): Update.
449 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
451 * cgen-opc.c: #include <ctype.h>.
452 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
453 Handle case insensitive hashing.
454 (hash_keyword_value): Change type of `value' to unsigned int.
456 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
458 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
459 precision FP, mark it as such. Likewise for double precision
460 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
461 possible.
463 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
465 * ppc-opc.c (extract_nsi): make unsigned expression signed before
466 negating it.
467 (UNUSED): remove one level of parens, so MSVC doesn't choke on
468 nesting depth when all the macros are expanded.
470 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
472 * sparc-opc.c: The fcmp v9a instructions take an integer register
473 as a destination, not a floating point register. From Christian
474 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
476 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
478 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
479 syntax. From Roman Hodek
480 <rnhodek@faui22c.informatik.uni-erlangen.de>.
482 * i386-dis.c (twobyte_has_modrm): Fix pand.
484 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
486 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
488 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
490 * arm-dis.c: Add prototypes for arm_decode_shift and
491 print_insn_arm.
493 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
495 * mips-opc.c: Add r3900 insns.
497 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
499 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
500 print delay slot instructions on the same line. When using a PC
501 relative load, add a comment with the value being loaded if it can
502 be obtained.
504 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
506 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
507 to pushS/popS for segment regs and byte constant so that
508 pushw/popw printed when in 16 bit data mode.
510 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
511 print cbtw, cwtd in 16 bit data mode.
512 * i386-dis.c (putop): extra case W to support above.
514 * i386-dis.c (print_insn_x86): print addr32 prefix when given
515 address size prefix in 16 bit address mode.
517 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
519 * sh-dis.c: Reindent. Rename local variable fprintf to
520 fprintf_fn.
522 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
524 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
526 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
528 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
529 field membership.
530 * mips16-opc.c (mip16_opcodes): same.
532 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
534 * m68k-opc.c (moveb): Change $d to %d.
536 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
538 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
539 (twobyte_has_modrm): Likewise.
540 (grps): Likewise.
541 (OP_MMX, OP_EM, OP_MS): New static functions.
543 * i386-dis.c: Revert patch of April 4. The output now matches
544 what gcc generates.
546 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
548 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
549 of $simm16.
551 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
553 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
555 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
557 * Makefile.in (install): Depend upon installdirs.
558 (installdirs): New target.
560 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
562 From Thomas Graichen <graichen@rzpd.de>:
563 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
564 * configure: Rebuild.
566 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
568 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
569 Delete string{,s}.h support.
571 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
573 * cgen-asm.c (cgen_parse_operand_fn): New global.
574 (cgen_parse_{{,un}signed_integer,address}): Update call to
575 cgen_parse_operand_fn.
576 (cgen_init_parse_operand): New function.
577 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
578 from cgen_asm_init_parse.
579 (m32r_cgen_assemble_insn): New operand `errmsg'.
580 Delete call to as_bad, return error message to caller.
581 (m32r_cgen_asm_hash_keywords): #if 0 out.
583 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
585 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
586 not data register.
587 [case 'J']: Fix typo in register name.
589 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
591 * configure.in: Substitute SHLIB_LIBS.
592 * configure: Rebuild.
593 * Makefile.in (SHLIB_LIBS): New variable.
594 ($(SHLIB)): Use $(SHLIB_LIBS).
596 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
598 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
600 * cgen-opc.c (hash_keyword_name): Improve algorithm.
602 * disassemble.c (disassembler): Handle m32r.
604 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
606 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
607 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
608 * Makefile.in (CFILES): Add them.
609 (ALL_MACHINES): Add them.
610 (dependencies): Regenerate.
611 * configure.in (cgen_files): New variable.
612 (bfd_m32r_arch): Add entry.
613 * configure: Regenerate.
615 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
617 * configure.in: Correct file names for bfd_mn10[23]00_arch.
618 * configure: Rebuild.
620 * Makefile.in: Rebuild dependencies.
622 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
624 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
625 fdivp.
627 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
629 * Branched binutils 2.8.
631 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
633 * m10200-dis.c: Rename from mn10200-dis.c.
634 * m10200-opc.c: Rename from mn10200-opc.c.
635 * m10300-dis.c: Rename from mn10300-dis.c
636 * m10300-opc.c: Rename from mn10300-opc.c.
637 * Makefile.in: Update accordingly.
639 * mips16-opc.c: Add mul and dmul macros.
641 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
643 * makefile.vms: Update CFLAGS, add clean target.
645 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
647 * mips-opc.c: Add "wait". From Ralf Baechle
648 <ralf@gnu.ai.mit.edu>.
650 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
651 * configure, config.in: Rebuild.
652 * sysdep.h: Include <stdlib.h> if it exists.
653 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
654 <string.h>.
655 * Makefile.in: Rebuild dependencies.
657 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
659 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
660 Andrew Bray <andy@madhouse.demon.co.uk>.
662 * mips-opc.c: Add cast when setting mips_opcodes.
664 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
666 * v850-dis.c (disassemble): Fix sign extension problem.
667 * v850-opc.c (extract_d*): Fix sign extension problems to make
668 disassembly calculate branch offsets correctly.
670 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
672 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
674 * mips-opc.c: Add dctr and dctw.
676 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
678 * d30v-dis.c (print_insn): Change the way signed constants
679 are displayed.
681 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
683 * Makefile.in (BFD_H): New variable.
684 (HFILES): New variable.
685 (CFILES): Add all C files.
686 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
687 Delete old dependencies, and build new ones.
688 * dep-in.sed: New file.
690 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
692 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
694 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
696 * mn10200-opc.c: Change "trap" to "syscall".
697 * mn10300-opc.c: Add new "syscall" instruction.
699 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
701 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
702 mulul insns on the coldfire.
704 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
706 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
707 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
708 (print_insn_little_arm): Likewise.
710 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
712 Based on patches from H.J. Lu <hjl@lucon.org>:
713 * i386-dis.c (fetch_data): Add prototype.
714 * m68k-dis.c (fetch_data): Add prototype.
715 (dummy_print_address): Add prototype. Make static.
716 * ppc-opc.c (valid_bo): Add prototype.
717 * sparc-dis.c (build_hash_table): Add prototype.
718 (is_delayed_branch, compute_arch_mask): Add prototypes.
719 (print_insn_sparc): Make several local variables const.
720 (compare_opcodes): Change arguments to const PTR. Add prototype.
721 * sparc-opc.c (arg): Change name field to be const.
722 (lookup_name, lookup_value): Add prototypes. Change table and
723 name parameters to be const.
724 (sparc_encode_asi): Change name parameter to be const.
725 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
726 (sparc_encode_sparclet_cpreg): Likewise.
727 (sparc_decode_asi): Change return type to be const.
728 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
729 (sparc_decode_sparclet_cpreg): Likewise.
731 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
733 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
734 Solaris doesn't like the combined options, and the -f is
735 unnecessary.
736 (stamp-tshlink, install): Likewise.
738 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
740 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
741 as relaxable.
743 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
745 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
747 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
749 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
750 the mc68000.
752 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
754 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
756 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
758 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
760 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
762 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
764 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
766 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
767 floatformat_to_double to make portable.
768 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
769 precision float.
771 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
773 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
774 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
776 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
778 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
779 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
781 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
783 * tic80-opc.c (LSI_SCALED): Renamed from this ...
784 (OFF_SL_BR_SCALED): ... to this, and added the flag
785 TIC80_OPERAND_BASEREL to the flags word.
786 (tic80_opcodes): Replace all occurances of LSI_SCALED with
787 OFF_SL_BR_SCALED.
789 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
791 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
792 Change mips_opcodes from const array to a pointer,
793 and change bfd_mips_num_opcodes from const int to int,
794 so that we can increase the size of the mips opcodes table
795 dynamically.
797 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
799 * tic80-opc.c (tic80_predefined_symbols): Revert change to
800 store BITNUM values in the table in one's complement form
801 to match behavior when assembler is given a raw numeric
802 value for a BITNUM operand.
803 * tic80-dis.c (print_operand_bitnum): Ditto.
805 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
807 * d30v-opc.c: Removed references to FLAG_X.
809 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
811 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
813 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
815 * Makefile.in: Added d30v object files.
816 * configure: (bfd_d30v_arch) Rebuilt.
817 * configure.in: (bfd_d30v_arch) Added new case.
818 * d30v-dis.c: New file.
819 * d30v-opc.c: New file.
820 * disassemble.c (disassembler) Add entry for d30v.
822 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
824 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
825 representations for the floating point BITNUM values.
827 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
829 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
830 in the table in one's complement form, as they appear in the
831 actual instruction.
832 (tic80_symbol_to_value): Use macros to access predefined
833 symbol fields.
834 (tic80_value_to_symbol): Ditto.
835 (tic80_next_predefined_symbol): New function.
836 * tic80-dis.c (print_operand_bitnum): Remove code that did
837 one's complement for BITNUM values.
839 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
841 * makefile.vms: Remove 8 bit characters. Update to latest
842 gcc release.
844 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
846 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
848 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
850 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
851 (IMM24_PCREL): Likewise.
853 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
855 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
856 address for an extended PC relative instruction that is not a
857 branch.
859 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
861 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
862 bytes_per_line.
864 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
866 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
867 (tic80_opcodes): Sort entries so that long immediate forms
868 come after short immediate forms, making it easier for
869 assembler to select the right one for a given operand.
871 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
873 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
874 display_endian.
875 (print_insn_mips16): Likewise.
877 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
879 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
880 a symbol class that restricts translation to just that
881 class (general register, condition code, etc).
883 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
885 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
886 and REG_DEST_E for register operands that have to be
887 an even numbered register. Add REG_FPA for operands that
888 are one of the floating point accumulator registers.
889 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
890 (tic80_opcodes): Change entries that need even numbered
891 register operands to use the new operand table entries.
892 Add "or" entries that are identical to "or.tt" entries.
894 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
896 * mips16-opc.c: Add new cases of exit instruction for
897 disassembler.
898 * mips-dis.c (print_mips16_insn_arg): Display floating point
899 registers in operands of exit instruction. Print `$' before
900 register names in operands of entry and exit instructions.
902 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
904 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
905 pairs for all predefined symbols recognized by the assembler.
906 Also used by the disassembling routines.
907 (tic80_symbol_to_value): New function.
908 (tic80_value_to_symbol): New function.
909 * tic80-dis.c (print_operand_control_register,
910 print_operand_condition_code, print_operand_bitnum):
911 Remove private tables and use tic80_value_to_symbol function.
913 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
915 * d10v-dis.c (print_operand): Change address printing
916 to correctly handle PC wrapping. Fixes PR11490.
918 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
920 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
921 branches relaxable.
923 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
925 * mips-dis.c (print_insn_mips16): Set insn_info information.
926 (print_mips16_insn_arg): Likewise.
928 * mips-dis.c (print_insn_mips16): Better handling of an extend
929 opcode followed by an instruction which can not be extended.
931 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
933 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
934 coldfire moveb instruction to not allow an address register as
935 destination. Although the documentation does not indicate that
936 this is invalid, experiments uncovered unexpected behavior.
937 Added a comment explaining the situation. Thanks to Andreas
938 Schwab for pointing this out to me.
940 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
942 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
943 entries are presorted so that entries with the same mnemonic are
944 adjacent to each other in the table. Sort the entries for each
945 instruction so that this is true.
947 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
949 * m68k-dis.c: Include <libiberty.h>.
950 (print_insn_m68k): Sort the opcode table on the most significant
951 nibble of the opcode.
953 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
955 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
956 "vsub", "vst", "xnor", and "xor" instructions.
957 (V_a1): Renamed from V_a, msb of accumulator reg number.
958 (V_a0): Add macro, lsb of accumulator reg number.
960 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
962 * tic80-dis.c (print_insn_tic80): Broke excessively long
963 function up into several smaller ones and arranged for
964 the instruction printing function to be callable recursively
965 to print vector instructions that have both a load and a
966 math instruction packed into a single opcode.
967 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
968 to explain why it comes after the other vector opcodes.
970 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
972 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
973 move insns to handle immediate operands.
975 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
977 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
978 fix operand mask in the "moveml" entries for the coldfire.
980 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
982 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
983 New macros for building vector instruction opcodes.
984 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
985 FMT_LI, which were unused. The field is now a flags field.
986 Remove some opcodes that are possible, but illegal, such
987 as long immediate instructions with doubles for immediate
988 values. Add "vadd" and "vld" instructions.
990 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
992 * tic80-opc.c (tic80_operands): Reorder some table entries to make
993 the order more logical. Move the shift alias instructions ("rotl",
994 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
995 interspersed with the regular sr.x and sl.x instructions. Add
996 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
997 "sub", "subu", "swcr", and "trap".
999 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1001 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1002 (OFF_SL_PC): Renamed from OFF_SL.
1003 (OFF_SS_BR): New operand type for base relative operand.
1004 (OFF_SL_BR): New operand type for base relative operand.
1005 (REG_BASE): New operand type for base register operand.
1006 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1007 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1008 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1009 instructions.
1010 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1011 10 char field, padded with spaces on rhs, rather than a string
1012 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1013 than old TIC80_OPERAND_RELATIVE. Add support for new
1014 TIC80_OPERAND_BASEREL flag bit.
1016 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1018 * tic80-dis.c (print_insn_tic80): Print floating point operands
1019 as floats.
1020 * tic80-opc.c (SPFI): Add single precision floating point
1021 immediate operand type.
1022 (ROTATE): Add rotate operand type for shifts.
1023 (ENDMASK): Add for shifts.
1024 (n): Macro for the 'n' bit.
1025 (i): Macro for the 'i' bit.
1026 (PD): Macro for the 'PD' field.
1027 (P2): Macro for the 'P2' field.
1028 (P1): Macro for the 'P1' field.
1029 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1030 "fcmp", and "fdiv".
1032 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1034 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1035 adding in current address for pc-relative operands.
1037 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1039 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1040 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1041 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1042 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1043 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1044 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1045 (REG_SCALED, LSI_SCALED): New operand types.
1046 (E): New macro for 'E' bit at bit 27.
1047 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1048 opcodes, including the various size flavors (b,h,w,d) for
1049 the direct load and store instructions.
1051 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1053 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1054 in an instruction.
1055 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1056 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1057 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1058 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1059 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1060 masks with "MASK_* & ~M_*" to get the M bit reset.
1061 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1063 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1065 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1066 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1067 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1068 form.
1069 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1070 CC, SICR, and LICR table entries.
1071 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1072 "bcnd", and "brcr" opcodes.
1074 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1076 * ppc-opc.c (powerpc_operands): Make comment match the
1077 actual fields (no shift field).
1078 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1079 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1080 partial implementation, work in progress.
1081 * tic80-opc.c (tic80_operands): Begin construction operands table.
1082 (tic80_opcodes): Continue populating opcodes table and start
1083 filling in the operand indices.
1084 (tic80_num_opcodes): Add this.
1086 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1088 * m68k-opc.c: Add #B case for moveq.
1090 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1092 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1093 before they are used.
1095 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1097 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1098 for "breakpoint" instruction.
1100 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1102 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1103 (dep): Use ALL_CFLAGS rather than CFLAGS.
1105 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1107 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1108 flag.
1110 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1112 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1113 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1115 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1117 * mips16-opc.c: Add "abs".
1119 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1121 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1122 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1123 (disassembler): Add bfd_arch_tic80 support to set disassemble
1124 to print_insn_tic80.
1125 * tic80-dis.c (print_insn_tic80): Add stub.
1127 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1129 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1130 * configure: Regenerate with autoconf.
1131 * tic80-dis.c: Add file.
1132 * tic80-opc.c: Add file.
1134 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1136 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1138 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1140 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1141 (mn10200_opcodes): Use it for some logicals and btst insns.
1142 Add "break" and "trap" instructions.
1144 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1146 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1148 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1150 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1151 relative load or add now depends upon whether the instruction is
1152 in a delay slot.
1154 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1156 * mn10200-dis.c: Finish writing disassembler.
1157 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1158 Fix mask for "jmp (an)".
1160 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1161 handle endianness issues for mn10300.
1163 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1165 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1167 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1168 instruction. Fix opcode field for "movb (imm24),dn".
1170 * mn10200-opc.c (mn10200_operands): Fix insertion position
1171 for DI operand.
1173 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1175 * mn10200-opc.c: Create mn10200 opcode table.
1176 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1177 but moving along nicely.
1179 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1181 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1183 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1185 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1186 specifiers for fmovem* instructions.
1188 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1190 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1192 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1194 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1195 with dsrl.
1197 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1199 * mn10300-opc.c: Add some comments explaining the various
1200 operands and such.
1202 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1204 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1206 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1207 specifiers.
1209 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1210 operand specifiers in fmovm* instructions.
1212 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1214 * ppc-opc.c (insert_li): Give an error if the offset has the two
1215 least significant bits set.
1217 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1219 * mips-dis.c (print_insn_mips16): Separate the instruction from
1220 the arguments with a tab, not a space.
1222 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1224 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1225 register prefix.
1227 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1228 mov am,(imm32,sp).
1230 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1232 * configure: Rebuild with autoconf 2.12.
1234 Add support for mips16 (16 bit MIPS implementation):
1235 * mips16-opc.c: New file.
1236 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1237 (mips16_reg_names): New static array.
1238 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1239 after seeing a 16 bit symbol.
1240 (print_insn_little_mips): Likewise.
1241 (print_insn_mips16): New static function.
1242 (print_mips16_insn_arg): New static function.
1243 * mips-opc.c: Add jalx instruction.
1244 * Makefile.in (mips16-opc.o): New target.
1245 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1246 * configure: Rebuild.
1248 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1250 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1251 operand specifiers in *save, *restore and movem* instructions.
1253 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1254 the coldfire.
1256 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1257 register operands for immediate arithmetic, not, neg, negx, and
1258 set according to condition instructions.
1260 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1261 specifier of the effective-address operand in immediate forms of
1262 arithmetic instructions. The specifier for the immediate operand
1263 notes how and where the constant will be stored.
1265 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1267 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1268 opcode.
1270 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1271 register prefix.
1273 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1275 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1277 * mn10300-dis.c (disassemble): Handle register lists.
1279 * mn10300-opc.c: Fix handling of register list operand for
1280 "call", "ret", and "rets" instructions.
1282 * mn10300-dis.c (disassemble): Print PC-relative and memory
1283 addresses symbolically if possible.
1284 * mn10300-opc.c: Distinguish between absolute memory addresses,
1285 pc-relative offsets & random immediates.
1287 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1288 in 7 byte insns.
1289 (disassemble): Handle SPLIT and EXTENDED operands.
1291 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1293 * mn10300-dis.c: Rough cut at printing some operands.
1295 * mn10300-dis.c: Start working on disassembler support.
1296 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1298 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1299 list.
1300 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1302 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1304 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1306 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1308 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1309 register argument is calls and jmp instructions.
1311 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1313 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1314 getx operand. Fix opcode for mulqu imm,dn.
1316 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1318 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1319 in MN10300_OPERAND_SPLIT operands for how many bits
1320 appear in the basic insn word. Add IMM32_HIGH24,
1321 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1322 (mn10300_opcodes): Use new operands as needed.
1324 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1325 for bset, bclr, btst instructions.
1326 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1328 * mn10300-opc.c (mn10300_operands): Remove many redundant
1329 operands. Update opcode table as appropriate.
1330 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1331 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1333 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1335 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1336 operands (for indexed load/stores). Fix bitpos for DI
1337 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1338 few instructions that insert immediates/displacements in the
1339 middle of the instruction. Add IMM8E for 8 bit immediate in
1340 the extended part of an instruction.
1341 (mn10300_operands): Use new opcodes as appropriate.
1343 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1345 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1346 sequential so the assembler never parallelizes it with
1347 other instructions.
1349 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1351 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1352 a data/address register that appears in register field 0
1353 and register field 1.
1354 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1356 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1358 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1359 standard disassembly.
1361 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1362 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1363 Recategorize PALcode instructions.
1365 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1367 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1369 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1371 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1372 there are no operand types.
1374 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1376 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1377 changed.
1378 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1380 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1382 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1384 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1386 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1387 and sst.w instructions.
1389 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1390 "bCC"instructions).
1392 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1394 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1395 and the arguments.
1397 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1399 * ppc-opc.c (PPCPWR2): Define.
1400 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1401 it.
1403 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1405 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1406 field for movhu instruction.
1408 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1409 cast value to "long" not "signed long" to keep hpux10
1410 compiler quiet.
1412 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1414 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1415 for mov (abs16),DN.
1417 * mn10300-opc.c (FMT*): Remove definitions.
1419 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1420 for shift-by-register opcodes.
1422 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1423 into [AD][MN][01] for encoding the position of the register
1424 in the opcode.
1426 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1428 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1429 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1431 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1433 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1434 Fix various typos. Add "PAREN" operand.
1435 (MEM, MEM2): Define.
1436 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1437 operands. Fix several typos.
1439 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1440 changes.
1442 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1444 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1445 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1446 at this time.
1447 (mn10300_opcodes): Break opcode format out into its own field.
1448 Update many operand fields to deal with signed vs unsigned
1449 issues. Fix one or two typos in the "mov" instruction
1450 opcode, mask and/or operand fields.
1452 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1454 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1455 m68851 wasn't reset.
1457 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1459 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1460 all opcodes. Very rough cut at operands for all opcodes.
1462 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1463 opcode table.
1465 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1467 * mn10200-opc.c, mn10300-opc.c: New files.
1468 * mn10200-dis.c, mn10300-dis.c: New files.
1469 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1470 * disassemble.c: Break mn10x00 support into 10200 and 10300
1471 support.
1472 * configure.in: Likewise.
1473 * configure: Rebuilt.
1475 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1477 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1479 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1481 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1482 MN10x00 processors.
1483 * disassemble.c (ARCH_mn10x00): Define.
1484 (disassembler): Handle bfd_arch_mn10x00.
1485 * configure.in: Recognize bfd_mn10x00_arch.
1486 * configure: Rebuilt.
1488 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1490 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1491 accordingly. Don't declare functions using op_rtn.
1493 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1495 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1496 params to be more standard.
1497 * (disassemble): Print absolute addresses and symbolic names for
1498 branch and jump targets.
1499 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1500 bit operands.
1501 * (v850_opcodes): Add breakpoint insn.
1503 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1505 * m68k-opc.c: Move the fmovemx data register cases before the
1506 other cases, so that they get recognized before the data register
1507 does gets treated as a degenerate register list.
1509 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1511 * mips-opc.c: Add a case for "div" and "divu" with two registers
1512 and a destination of $0.
1514 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1516 * mips-dis.c (print_insn_arg): Add prototype.
1517 (_print_insn_mips): Ditto.
1519 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1521 * mips-dis.c (print_insn_arg): Print condition code registers as
1522 $fccN.
1524 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1526 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1528 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1530 * v850-dis.c (disassemble): Make static. Provide prototype.
1532 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1534 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1535 in range checks.
1537 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1539 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1540 ']' characters into the output stream.
1541 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1542 Add "memop" field to all opcodes (for the disassembler).
1543 Reorder opcodes so that "nop" comes before "mov" and "jr"
1544 comes before "jarl".
1546 * v850-dis.c (print_insn_v850): Fix typo in last change.
1548 * v850-dis.c (print_insn_v850): Properly handle disassembling
1549 a two byte insn at the end of a memory region when the memory
1550 region's size is only two byte aligned.
1552 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1554 * v850-dis.c (v850_reg_names): Define.
1555 (v850_sreg_names, v850_cc_names): Likewise.
1556 (disassemble): Very rough cut at printing operands (unformatted).
1558 * v850-opc.c (BOP_MASK): Fix.
1559 (v850_opcodes): Fix mask for jarl and jr.
1561 * v850-dis.c: New file. Skeleton for disassembler support.
1562 * Makefile.in Remove v850 references, they're not needed here.
1563 * configure.in: Add v850-dis.o when building v850 toolchains.
1564 * configure: Rebuilt.
1565 * disassemble.c (disassembler): Call v850 disassembler.
1567 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1568 (insert_d8_6, extract_d8_6): New functions.
1569 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1570 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1571 Add D8_6.
1572 (IF4A, IF4B): Use "D7" instead of "D7S".
1573 (IF4C, IF4D): Use "D8_7" instead of "D8".
1574 (IF4E, IF4F): New. Use "D8_6".
1575 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1576 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1578 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1579 (v850_operands): Change D16 to D16_15, use special insert/extract
1580 routines. New new D16 that uses the generic insert/extract code.
1581 (IF7A, IF7B): Use D16_15.
1582 (IF7C, IF7D): New. Use D16.
1583 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1585 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1586 message. Issue an error if the branch offset is odd.
1588 * v850-opc.c: Add notes about needing special insert/extract
1589 for all the load/store insns, except "ld.b" and "st.b".
1591 * v850-opc.c (insert_d22, extract_d22): New functions.
1592 (v850_operands): Use insert_d22 and extract_d22 for
1593 D22 operands.
1594 (insert_d9): Fix range check.
1596 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1598 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1599 and set bits field to D9 and D22 operands.
1601 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1603 * v850-opc.c (v850_operands): Define SR2 operand.
1604 (v850_opcodes): "ldsr" uses R1,SR2.
1606 * v850-opc.c (v850_opcodes): Fix opcode specs for
1607 sld.w, sst.b, sst.h, sst.w, and nop.
1609 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1611 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1612 end of the opcode table.
1614 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1616 * d10v-opc.c (pre_defined_registers): Added register pairs,
1617 "r0-r1", "r2-r3", etc.
1619 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1621 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1622 Create I16U for an unsigned 16bit mmediate operand.
1623 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1625 * v850-opc.c (v850_operands): Define EP operand.
1626 (IF4A, IF4B, IF4C, IF4D): Use EP.
1628 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1629 with immediate operand, "movhi". Tweak "ldsr".
1631 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1632 correct. Get sld.[bhw] and sst.[bhw] closer.
1634 * v850-opc.c (v850_operands): "not" is a two byte insn
1636 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1638 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1640 * v850-opc.c (two): Get order of words correct.
1642 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1644 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1645 register source and destination operands.
1646 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1648 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1649 same thinko in "trap" opcode.
1651 * v850-opc.c (v850_opcodes): Add initializer for size field
1652 on all opcodes.
1654 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1655 Add D8 for 8-bit unsigned field in short load/store insns.
1656 (IF4A, IF4D): These both need two registers.
1657 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1658 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1659 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1660 for "ldsr" and "stsr".
1661 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1662 is unsigned.
1664 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1665 short store word (sst.w).
1667 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1669 * v850-opc.c (v850_operands): Added insert and extract fields,
1670 pointers to functions that handle unusual operand encodings.
1672 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1674 * v850-opc.c (v850_opcodes): Enable "trap".
1676 * v850-opc.c (v850_opcodes): Fix order of displacement
1677 and register for "set1", "clr1", "not1", and "tst1".
1679 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1681 * v850-opc.c (v850_operands): Add "B3" support.
1682 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1683 and "tst1".
1685 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1687 * v850-opc.c: Close unterminated comment.
1689 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1691 * v850-opc.c (v850_operands): Add flags field.
1692 (v850_opcodes): add move opcodes.
1694 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1696 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1697 * configure: (bfd_v850v_arch) Add new case.
1698 * configure.in: (bfd_v850_arch) Add new case.
1699 * v850-opc.c: New file.
1701 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1703 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1705 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1707 * d10v-opc.c: Add additional information to the opcode
1708 table to help determinine which instructions can be done
1709 in parallel.
1711 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1713 * mpw-make.sed: Update editing of include pathnames to be
1714 more general.
1716 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1718 * arm-opc.h: Added "bx" instruction definition.
1720 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1722 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1724 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1726 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1728 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1730 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1732 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1734 * makefile.vms: Update for alpha-opc changes.
1736 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1738 * i386-dis.c (print_insn_i386): Actually return the correct value.
1739 (ONE, OP_ONE): #ifdef out; not used.
1741 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1743 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1744 Changed subi operand type to treat 0 as 16.
1746 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1748 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1749 <rose@netcom.com>.
1751 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1753 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1754 memory transfer instructions. Add new format string entries %h and %s.
1755 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1756 formats %h and %s.
1758 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1760 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1761 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1763 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1765 * alpha-dis.c (print_insn_alpha_osf): Remove.
1766 (print_insn_alpha_vms): Remove.
1767 (print_insn_alpha): Make globally visible. Chose the register
1768 names based on info->flavour.
1769 * disassemble.c: Always return print_insn_alpha for the alpha.
1771 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1773 * d10v-dis.c (dis_long): Handle unknown opcodes.
1775 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1777 * d10v-opc.c: Changes to support signed and unsigned numbers.
1778 All instructions with the same name that have long and short forms
1779 now end in ".l" or ".s". Divs added.
1780 * d10v-dis.c: Changes to support signed and unsigned numbers.
1782 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1784 * d10v-dis.c: Change all functions to use info->print_address_func.
1786 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1788 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1789 move ccr/sr insns more strict so that the disassembler only
1790 selects them when the addressing mode is data register.
1792 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1793 * d10v-opc.c (pre_defined_registers): Declare.
1794 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1795 to pick a better name for the registers.
1797 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1799 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1800 operands for fexpand and fpmerge. From Christian Kuehnke
1801 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1803 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1805 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1806 print routine. Take new regnames and cpumask arguments.
1807 Kill the environment variable nonsense.
1808 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1809 (print_insn_alpha_vms): New function. Do VMS style regnames.
1810 * disassemble.c (disassembler): Test bfd flavour to pick
1811 between OSF and VMS routines. Default to OSF.
1813 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1815 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1816 * configure: Rebuild.
1817 * Makefile.in (install): Use @INSTALL_SHLIB@.
1819 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1821 * configure: (bfd_d10v_arch) Add new case.
1822 * configure.in: (bfd_d10v_arch) Add new case.
1823 * d10v-dis.c: New file.
1824 * d10v-opc.c: New file.
1825 * disassemble.c (disassembler) Add entry for d10v.
1827 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1829 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1830 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1832 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1834 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1835 distinguish between variants of the instruction set.
1836 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1837 distinguish between variants of the instruction set.
1839 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1841 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1842 the 8086 instruction set.
1843 * i386-dis.c: General cleanups. Make most things static. Add
1844 prototypes. Get rid of static variables aflags and dflags. Pass
1845 them as args (to almost everything).
1847 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1849 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1851 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1853 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1854 if the next arg is marked with SRC_IN_DST. Gross.
1856 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1857 we're looking for and find EXR.
1859 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1860 if we're looking for KBIT and we don't find it.
1862 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1863 for L_3 and L_2.
1865 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1866 3bit immediate operands.
1868 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1870 * Released binutils 2.7.
1872 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1873 <kkaempf@progis.ac-net.de>.
1875 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1877 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1879 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1881 * sparc-dis.c (print_insn_sparclite): New routine to print
1882 sparclite instructions.
1884 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1886 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1888 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1890 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1891 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1892 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1894 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1896 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1897 Use autoconf-set values.
1898 (docdir, oldincludedir): Removed.
1899 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1901 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1903 * alpha-opc.c: New file.
1904 * alpha-opc.h: Remove.
1905 * alpha-dis.c: Complete rewrite to use new opcode table.
1906 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1907 * configure: Rebuild with autoconf 2.10.
1908 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1909 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1910 alpha-opc.h.
1911 (alpha-opc.o): New target.
1913 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1915 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1916 Set imm_added_to_rs1 even if the source and destination register
1917 are not the same.
1919 * sparc-opc.c: Add some two operand forms of the wr instruction.
1921 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1923 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1924 to just "mode".
1926 * disassemble.c (disassembler): Handle H8/S.
1927 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1929 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1931 * sparc-opc.c: Add beq/teq as aliases for be/te.
1933 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1934 <sergei@msil.sps.mot.com>.
1936 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1938 * makefile.vms: New file.
1940 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1942 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1944 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1945 regardless of plen.
1947 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1949 * i386-dis.c (OP_OFF): Call append_prefix.
1951 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1953 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1954 unsigned long to silence a warning from the Solaris PowerPC
1955 compiler.
1957 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1959 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1961 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1963 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1964 (X_IMM13): Delete.
1965 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1966 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1967 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1968 cpush, cpusha, cpull sparclet insns.
1970 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1972 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1974 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1976 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1977 Set F_FLOAT on other floating point instructions.
1979 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1981 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1982 registers.
1983 (powerpc_opcodes): Add 860/821 specific SPRs.
1985 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1987 * configure.in: Permit --enable-shared to specify a list of
1988 directories. Set and substitute BFD_PICLIST.
1989 * configure: Rebuild.
1990 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1991 uses. Set to @BFD_PICLIST@.
1993 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1995 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1996 not "abs", which may be needed for the absolute in something
1997 like btst #0,@10:8. Print L_3 immediates separately from other
1998 immediates. Change ABSMOV reference to ABS8MEM.
2000 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2002 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2003 (current_arch_mask): New static global.
2004 (compute_arch_mask): New static function.
2005 (print_insn_sparc): Delete sparc_v9_p. New static local
2006 current_mach. Resort opcode table if current_mach changes.
2007 Generalize "insn not supported" test.
2008 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2009 Delete test for v9/!v9.
2010 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2011 (v6notlet): Define.
2012 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2013 (brfcx): Renamed to FBRX.
2014 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2015 coprocessor mnemonics are not supported on the sparclet).
2016 (condf): Renamed to CONDF.
2017 (SLCBCC2): Delete F_ALIAS flag.
2019 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2021 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2022 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2024 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2026 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2027 that the shared library version number is set correctly.
2029 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2031 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2032 Miles Bader <miles@gnu.ai.mit.edu>.
2033 * configure: Rebuild.
2035 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2037 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2038 malloc.
2040 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2042 * configure: Rebuild with autoconf 2.8.
2044 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2046 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2047 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2049 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2051 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2052 since they appear as targets in Makefile.in.
2053 * configure: Rebuild.
2055 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2057 * mpw-make.sed: Edit out shared library support bits.
2059 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2061 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2062 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2063 (sparc_opcodes): Add sparclet insns.
2064 (sparclet_cpreg_table): New static local.
2065 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2066 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2068 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2070 * i386-dis.c (index16): New static variable.
2071 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2072 other way around.
2073 (OP_indirE): Return result of OP_E.
2074 (OP_E): Check for 16 bit addressing mode, and disassemble
2075 correctly. Optimised 32 bit case a little. Don't print
2076 "(base,index,scale)" when sib specifies only an offset.
2078 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2080 * configure.in: Set and substitute SHLIB_DEP.
2081 * configure: Rebuild.
2082 * Makefile.in (SHLIB_DEP): New variable.
2083 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2084 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2085 COMMON_SHLIB, add them to piclist with appropriate modifications.
2086 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2087 here: just use piclist.
2089 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2091 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2092 (print_insn_sparc): Rewrite v9/not-v9 tests.
2093 (compare_opcodes): Likewise.
2094 * sparc-opc.c (MASK_<ARCH>): Define.
2095 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2096 (sparclet,v6notv9): Define.
2097 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2098 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2100 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2102 * configure.in: Call AC_PROG_CC before configure.host.
2103 * configure: Rebuild.
2105 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2107 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2109 * i386-dis.c (onebyte_has_modrm): New static array.
2110 (twobyte_has_modrm): New static array.
2111 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2113 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2115 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2116 $(SHLINK).
2118 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2120 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2121 doesn't conflict.
2123 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2125 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2126 m68010up, not just m68020up | cpu32.
2128 * Makefile.in (SONAME): New variable.
2129 ($(SHLINK)): Make a link to the transformed name, as well.
2130 (stamp-tshlink): New target.
2131 (install): Skip stamp-tshlink during install.
2133 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2135 * configure.in: Call AC_ARG_PROGRAM.
2136 * configure: Rebuild.
2137 * Makefile.in (program_transform_name): New variable.
2138 (install): Transform library name before installing it.
2140 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2142 * i960-dis.c (mem): Add HX dcinva instruction.
2144 Support for building as a shared library, based on patches from
2145 Alan Modra <alan@spri.levels.unisa.edu.au>:
2146 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2147 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2148 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2149 * configure: Rebuild.
2150 * Makefile.in (ALLLIBS): New variable.
2151 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2152 (COMMON_SHLIB, SHLINK): New variables.
2153 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2154 (STAGESTUFF): Remove variable.
2155 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2156 (stamp-piclist, piclist): New targets.
2157 ($(SHLIB), $(SHLINK)): New targets.
2158 ($(OFILES)): Depend upon stamp-picdir.
2159 (disassemble.o): Build twice if PICFLAG is set.
2160 (MOSTLYCLEAN): Add pic/*.o.
2161 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2162 (distclean): Remove pic and stamp-picdir.
2163 (install): Install shared libraries.
2164 (stamp-picdir): New target.
2166 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2168 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2169 Print unknown instruction as "unknown", rather than in hex.
2171 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2173 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2175 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2177 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2179 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2181 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2182 when necessary. From Ulrich Drepper
2183 <drepper@myware.rz.uni-karlsruhe.de>.
2185 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2187 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2188 sparc_num_opcodes. Update architecture enum values.
2189 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2190 (sparc_opcode_lookup_arch): New function.
2191 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2192 (sparc_opcodes): Add v9a shutdown insn.
2194 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2196 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2197 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2198 architecture.
2199 (print_insn_sparc64): Deleted.
2200 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2201 print_insn_sparc.
2203 * sparc-opc.c (architecture_pname): Add v9a.
2205 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2207 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2208 incorrectly defined as 0x16 when it should be 0x15.
2209 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2210 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2211 excb (exception barrier) which is defined in the Alpha
2212 Architecture Handbook version 2.
2213 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2214 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2215 disassembled as or, for example.
2217 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2219 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2220 (_print_insn_mips): Change i from int to unsigned int.
2222 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2224 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2225 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2227 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2229 * i386-dis.c: Added Pentium Pro instructions.
2231 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2233 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2234 being for Power2.
2236 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2238 * sh-opc.h (sh_nibble_type): Added REG_B.
2239 (sh_arg_type): Added A_REG_B.
2240 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2241 and stc.l opcodes.
2242 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2244 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2246 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2248 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2250 * Makefile.in (distclean): Remove stamp-h. From Ronald
2251 F. Guilmette <rfg@monkeys.com>.
2253 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2255 From David Mosberger-Tang <davidm@azstarnet.com>:
2256 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2257 instruction.
2259 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2261 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2262 (sh_table): Added many SH3 opcodes.
2263 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2265 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2267 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2268 (subco,subco.): Mark this PPC, not PPCCOM.
2270 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2272 * configure: Rebuild with autoconf 2.7.
2274 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2276 * configure: Rebuild with autoconf 2.6.
2278 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2280 * configure.in: Sort list of architectures. Accept but do nothing
2281 for alliant, convex, pyramid, romp, and tahoe.
2283 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2285 * a29k-dis.c (print_special): Change num to unsigned int.
2287 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2289 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2290 shifting it.
2292 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2294 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2295 * configure: Rebuilt.
2297 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2299 * configure.in: Add case for bfd_i860_arch.
2300 * configure: Rebuild.
2302 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2304 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2305 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2306 (NEXTDOUBLE): Likewise.
2307 (print_insn_m68k): Don't match fmoveml if there is more than one
2308 register in the list.
2309 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2311 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2313 * m68k-opc.c: Use #W rather than #w.
2314 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2316 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2318 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2319 and likewise for all the dbxx opcodes.
2321 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2323 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2325 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2327 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2328 the VR4100 specific instructions to the mips_opcodes structure.
2330 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2332 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2333 ugly Metrowerks bug in CW6, is fixed in CW7.
2335 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2337 * ppc-opc.c (whole file): Add flags for common/any support.
2339 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2341 * Makefile.in (BISON): Remove macro.
2342 (FLAGS_TO_PASS): Remove BISON.
2344 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2346 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2348 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2349 instructions that take no args by looking at the match mask.
2350 (print_insn_arg): Always print "%" before register names.
2351 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2352 [case '_']: Don't print "@#" before address.
2353 [case 'J']: Use "%s" as format string, not register name.
2354 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2356 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2358 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2359 name correctly.
2361 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2363 From David Mosberger-Tang <davidm@azstarnet.com>
2365 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2366 (alpha_insn_set): added definitions for VAX floating point
2367 instructions (Unix compilers don't generate these, but handcoded
2368 assembly might still use them).
2370 * alpha-dis.c (print_insn_alpha): added support for disassembling
2371 the miscellaneous instructions in the Alpha instruction set.
2373 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2375 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2376 no longer create sysdep.h, sed ppc-opc.c to work around a
2377 serious Metrowerks C bug.
2378 * mpw-make.in: Remove.
2379 * mpw-make.sed: New file, used by mpw-configure to edit
2380 Makefile.in into an MPW makefile.
2382 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2384 * Makefile.in (maintainer-clean): New synonym for realclean.
2386 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2388 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2389 which use '0', '1', and '2' instead. Specify the proper size for
2390 a pmove immediate operand. Correct the pmovefd patterns to be
2391 moves to a register, not from a register.
2392 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2394 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2396 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2397 %psr, %wim, %tbr as F_NOTV9.
2399 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2401 * Makefile.in (Makefile): Just rebuild Makefile when running
2402 config.status.
2403 (config.h, stamp-h): New targets.
2404 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2405 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2406 rebuilding config.h.
2407 * configure: Rebuild.
2409 * mips-opc.c: Change unaligned loads and stores with "t,A"
2410 operands to use "t,A(b)".
2412 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2414 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2416 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2418 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2419 until 3 instead of until 2.
2421 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2423 * Makefile.in (ALL_CFLAGS): Define.
2424 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2425 (MOSTLYCLEAN): Add config.log.
2426 (distclean): Don't remove config.log.
2427 * configure.in: Substitute HDEFINES.
2428 * configure: Rebuild.
2430 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2432 * sh-opc.h (sh_arg_type): Add F_FR0.
2433 (sh_table, case fmac): Add F_FR0 as first argument.
2435 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2437 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2439 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2441 * sparc-dis.c: Remove all references to NO_V9.
2443 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2445 * aclocal.m4: Just include ../bfd/aclocal.m4.
2446 * configure: Rebuild.
2448 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2450 * sparc-dis.c (X_DISP19): Define.
2451 (print_insn, case 'G'): Use it.
2452 (print_insn, case 'L'): Sign extend displacement.
2454 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2456 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2457 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2458 host_makefile_frag or frags.
2459 * aclocal.m4: New file.
2460 * configure: Rebuild.
2461 * Makefile.in (INSTALL): Set to @INSTALL@.
2462 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2463 (INSTALL_DATA): Set to @INSTALL_DATA@.
2464 (AR): Set to @AR@.
2465 (AR_FLAGS): Set to rc rather than qc.
2466 (CC): Define as @CC@.
2467 (CFLAGS): Set to @CFLAGS@.
2468 (@host_makefile_frag@): Remove.
2469 (config.status): Remove dependency upon @frags@.
2471 * configure.in: ../bfd/config.bfd now just sets shell variables.
2472 Use them rather than looking through target Makefile fragments.
2473 * configure: Rebuild.
2475 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2477 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2479 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2481 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2482 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2483 sparc64 insns.
2485 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2486 (lookup_{name,value}): New functions.
2487 (prefetch_table): New static local.
2488 (sparc_{encode,decode}_prefetch): New functions.
2489 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2491 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2493 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2494 instructions.
2496 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2498 * sh-dis.c: Correct comment on first line of file.
2500 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2502 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2504 * sparc-opc.c (asi, membar): New static locals.
2505 (sparc_{encode,decode}_{asi,membar}): New functions.
2506 (sparc_opcodes, membar insn): Fix.
2507 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2508 Support decoding of membar masks.
2509 (X_MEMBAR): Define.
2511 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2513 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2515 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2517 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2518 and likewise for the other branches. Add bhs as an alias for bcc,
2519 and likewise for the size variants. Add dbhs as an alias for
2520 dbcc.
2522 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2524 * sh-opc.h (FP sts instructions): Update to match reality.
2526 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2528 * m68k-dis.c: (fpcr_names): Add % before all register names.
2529 (reg_names): Likewise.
2530 (print_insn_arg): Don't explicitly print % before register names.
2531 Add % before register names in static array names. In case 'r',
2532 print data registers as `@(Dn)', not `Dn@'. When printing a
2533 memory address, don't print @# before it.
2534 (print_indexed): Change base_disp and outer_disp from int to
2535 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2536 syntax. Sign extend 8 byte displacement correctly.
2537 (print_base): Print using MIT syntax. Print zpc when appropriate.
2538 Change parameter disp from int to bfd_vma.
2540 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2541 for jsr.
2543 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2545 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2546 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2547 * sh-opc.h (sh_arg_type): Add new operand types.
2548 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2550 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2552 * Makefile.in (distclean): Remove generated file config.h.
2554 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2556 * Makefile.in (distclean): Remove generated file config.h.
2558 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2560 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2561 Clean up tables.
2562 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2563 (opcode): Remove.
2564 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2565 rather than numopcodes. Use m68k_opcodes rather than removed
2566 opcode function. Don't check F_ALIAS.
2567 (print_insn_arg): Change first parameter to be const char *.
2568 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2569 (m68k-opc.o): New target.
2570 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2571 * configure: Rebuild.
2573 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2575 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2576 (opcode_bits, opcode_hash_table): New variables.
2577 (opcodes_initialized): Renamed from opcodes_sorted.
2578 (build_hash_table): New function.
2579 (is_delayed_branch): Use hash table.
2580 (print_insn): Renamed from print_insn_sparc, made static.
2581 Build and use hash table. If !sparc64, ignore sparc64 insns,
2582 and vice-versa if sparc64.
2583 (print_insn_sparc, print_insn_sparc64): New functions.
2584 (compare_opcodes): Move sparc64 opcodes to end.
2585 Print commutative insns with constant second.
2586 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2588 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2590 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2591 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2592 avoids printing a delay slot in a delay slot.
2593 * sh-opc.h (sh_table): Fully bracket last entry.
2595 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2597 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2599 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2601 * configure.in: Get host_makefile_frag from ${srcdir}.
2603 * configure.in: Autoconfiscated. Check for string[s].h. Create
2604 config.h from config.in. Don't set up sysdep.h link.
2605 * sysdep.h: New file.
2606 * configure, config.in: New files, generated from configure.in.
2607 * Makefile.in: Updated to be processed autoconf-style.
2608 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2609 (Makefile): Depend on config.status.
2610 (config.status): New rule.
2611 * configure.bat: Update Makefile substitutions.
2613 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2615 * mips-opc.c (L1): Define.
2616 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2617 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2618 and wb.
2620 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2622 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2623 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2624 have multiple add units but only a single logical unit.
2626 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2627 shifted by 18, without any insertion or extraction function.
2628 (insert_cr, extract_cr): Remove.
2630 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2632 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2633 register names.
2635 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2637 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2638 * sh-opc.h: Add copyright.
2640 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2642 * Makefile.in (crunch-m68k): Delete extra target accidentally
2643 checked in a while ago.
2645 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2647 * sh-opc.h (sh_table): Add SH3 support.
2649 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2651 * sh-opc.h: Added bsrf and braf.
2653 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2655 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2656 bogus [ls]fm{ea,fd} patterns.
2658 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2659 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2660 initialize it from memory. Make function static.
2661 (print_insn_{big,little}_arm): New functions.
2662 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2663 the correct endianness.
2665 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2667 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2668 enum list.
2670 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2672 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2673 17th, so that it builds again using GCC as the compiler.
2675 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2677 * mips-dis.c (print_insn_little_mips): Cast return value from
2678 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2679 expects an unsigned long, and that might be fewer words of
2680 argument storage (e.g., if bfd_vma is long long on a 32-bit
2681 machine).
2682 (print_insn_big_mips): Likewise with bfd_getb32 value.
2683 (_print_insn_mips): Now static.
2685 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2687 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2688 gcc memory hog problem with initializer is fixed.
2690 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2692 Merge in support for Mac MPW as a host.
2693 (Old change descriptions retained for informational value.)
2695 * mpw-config.in (archname): Compute from the config.
2696 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2698 * mpw-config.in (target_arch): Compute from canonical target.
2699 (m68k, mips, powerpc, sparc): Add architectures.
2700 * mpw-make.in (disassemble.c.o): Add.
2701 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2703 * mpw-config.in (BFD_MACHINES): Set to a default value.
2704 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2706 * mpw-make.in (CSEARCH): Add extra-include to search path.
2708 * mpw-config.in (varargs.h): Don't create.
2709 (sysdep.h): Create using forward-include.
2710 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2712 * mpw-config.in: New file, MPW version of configure.in.
2713 * mpw-make.in: New file, MPW version of Makefile.in.
2715 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2717 * alpha-dis.c (print_insn_alpha): Put empty statement after
2718 default label.
2720 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2722 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2723 (low_sign_extend): Likewise.
2724 (get_field): Delete unused function.
2725 (set_field, deposit_14, deposit_21): Likewise.
2727 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2729 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2730 (guy@netapp.com).
2732 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2734 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2736 * alpha-opc.h (OSF_ASMCODE): define
2737 print pal-code names as defined in App C of the
2738 Alpha Architecture Reference Manual
2740 * alpha-dis.c: cleaned up output
2741 print stylized code forms as defined in App A.4.3 of the
2742 Alpha Architecture Reference Manual
2744 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2746 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2747 `rfe'.
2748 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2749 'N', and 'M'.
2751 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2753 * m68k-dis.c (opcode): New function. Returns address of opcode
2754 table entry given index, even if the opcode table was split to
2755 work around gcc bugs.
2756 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2757 directly.
2758 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2759 (reg_names): Now const.
2760 (print_insn_arg): Arrays cacheFieldName and names now const.
2761 (print_indexed): Array scales now const.
2763 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2765 * ppc-opc.c: Sort recently added instructions by minor opcode
2766 number within major opcode number.
2768 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2770 * hppa-dis.c: Include libhppa.h.
2772 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2774 * mips-opc.c: Change dli to use M_DLI, and add dla.
2776 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2778 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2780 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2782 * mips-opc.c: Add r4650 mul instruction.
2784 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2786 * mips-opc.c: Add uld and usd macros for unaligned double load and
2787 store.
2789 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2791 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2792 mfdcr, mtdcr, icbt, iccci.
2794 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2796 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2797 signed char fields to shorts, more portable.
2799 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2801 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2802 char fields as signed chars, since they may have negative values.
2804 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2806 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2807 (mycroft@netbsd.org).
2809 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2811 From "Logg, Ed" <elogg@ea.com>:
2812 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2813 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2814 value.
2816 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2818 * ppc-opc.c: Changes based on patch from David Edelsohn
2819 <edelsohn@mhpcc.edu>.
2820 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2821 SPR.
2822 (FXM_MASK): Define.
2823 (insert_tbr): New static function.
2824 (extract_tbr): New static function.
2825 (XFXFXM_MASK, XFXM): Define.
2826 (XSPRBAT_MASK, XSPRG_MASK): Define.
2827 (powerpc_opcodes): Add instructions to access special registers by
2828 name. Add mtcr and mftbu.
2830 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2832 * mips-opc.c (P3): Define.
2833 (mips_opcodes): Add mad and madu.
2835 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2837 * configure.in: Add W65 support.
2838 * disassemble.c: Likewise.
2839 * w65-opc.h, w65-dis.c: New files.
2841 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2843 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2844 immediates.
2846 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2848 * mips-opc.c: Add dli as a synonym for li.
2850 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2852 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2853 print something for reserved opcode values, even if it won't
2854 assemble again.
2856 * mips-dis.c (_print_insn_mips): When initializing, shift right
2857 and mask, to avoid sign extension problems on the Alpha.
2859 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2860 control registers.
2862 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2864 * sh-opc.h (mov.l gbr): Get direction right.
2865 * sh-dis.c (print_insn_shx): New function.
2866 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2867 print opcodes with right byte order.
2869 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2871 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2872 to avoid conflicts with getopt.
2874 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2876 * hppa-dis.c (print_insn_hppa): Read the instruction using
2877 bfd_getb32, so that it works on a little endian or 64 bit host.
2878 Remove unused local variable op.
2880 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2882 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2883 addu does not work correctly if -mips3.
2885 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2887 * a29k-dis.c (print_special): Add special register names defined
2888 on 29030, 29040 and 29050.
2889 (print_insn): Handle new operand type 'I'.
2891 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2893 * Makefile.in (INSTALL): Use top level install.sh script.
2895 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2897 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2898 that it works on a little endian host.
2900 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2902 * configure.in: Use ${config_shell} when running config.bfd.
2904 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2906 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2908 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2910 * a29k-dis.c (print_insn): Print the opcode.
2912 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2914 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2916 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2918 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2920 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2922 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2923 which store a value into memory.
2925 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2927 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2928 * arm-dis.c, arm-opc.h: New files.
2930 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2932 * Makefile.in (ns32k-dis.o): Add dependency.
2933 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2934 string, not as array of chars.
2936 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2938 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2940 * sparc-opc.c: Added sparclite extended FP operations, and
2941 versions of v9 impdep* instructions permitting specification of
2942 the OPF field.
2944 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2946 * i960-dis.c (reg_names): Now const.
2947 (struct sparse_tabent): New type, copied from array type in mem
2948 function.
2949 (ctrl): Local static array ctrl_tab now const.
2950 (cobr): Local static array cobr_tab now const.
2951 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2952 static variable mem_tab no longer explicitly initialized. Changed
2953 mem_init to const array of struct sparse_tabent.
2954 (reg): Local static variable reg_tab no longer explicitly
2955 initialized. Changed reg_init to const array of struct
2956 sparse_tabent.
2957 (ea): Local static array scale_tab now const.
2959 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2960 (REG_MAX): Updated.
2962 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2964 * configure.bat: the disassember needs to be enabled for
2965 "objdump -d" to work in djgpp.
2967 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2969 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2970 (invalid_float): Enabled general version, doesn't require running
2971 on ns32k host. Changed to take char* argument, and test for
2972 explicitly specified sizes, instead of using sizeof() on host CPU
2973 types.
2974 (INVALID_FLOAT): Cast first argument.
2975 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2976 list_P032, list_M032): Now const.
2977 (optlist, list_search): Made appropriate arguments now point to
2978 const.
2979 (print_insn_arg): Changed static array of one-character-string
2980 pointers into a static const array of characters; fixed sprintf
2981 statement accordingly.
2983 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2985 * ns32k-dis.c: Semi-new file. Had apparently been dropped
2986 from distribution. A ns32k-dis.c from a previous distribution has
2987 been brought up to date and supports the new interface.
2989 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2991 * configure.in: add bfd_ns32k_arch target support.
2993 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2994 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2996 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2998 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2999 disassembly right.
3001 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3003 * h8300-dis.c, mips-dis.c: Don't use true and false.
3005 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3007 * configure.in: Change --with-targets to --enable-targets.
3009 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3011 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3012 opcodes to the first instruction with that opcode, to speed
3013 disassembly of large files. From ralphc@pyramid.com (Ralph
3014 Campbell).
3016 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3018 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3020 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3022 * configure.bat: update to latest makefile.in
3024 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3026 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3027 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3028 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3029 slot insn is in a delay slot.
3030 * z8k-opc.h: (resflg): Fix patterns.
3031 * h8500-opc.h Fix CR insn patterns.
3033 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3035 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3036 "cmpl" before POWER versions, so that gas -many uses them.
3038 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3040 * disassemble.c: New file.
3041 * Makefile.in (OFILES): Add disassemble.o.
3042 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3043 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3044 binutils/configure.in.
3046 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3047 opcode being examined.
3049 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3051 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3052 (insert_ral, insert_ram, insert_ras): New functions.
3053 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3054 RAS for store with update.
3056 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3058 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3059 (edelsohn@npac.syr.edu).
3061 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3063 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3064 immediate argument.
3066 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3068 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3070 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3072 * ppc-opc.c (powerpc_operands): The signedp field has been
3073 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3074 instead. Add new operand SISIGNOPT.
3075 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3076 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3077 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3078 than signedp field.
3080 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3082 * i386-dis.c (struct private): Renamed to dis_private. `private'
3083 is a reserved word for dynix cc.
3085 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3087 * configure.in: Change error message to refer to bfd/config.bfd
3088 rather than bfd/configure.in.
3090 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3092 * ppc-opc.c: Define POWER2 as short alias flag.
3093 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3094 fsqrt.
3096 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3098 * i960-dis.c (print_insn_i960): Don't read a second word for
3099 opcodes 0, 1, 2 and 3.
3101 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3103 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3105 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3107 * m68881-ext.c: Removed; no longer used.
3108 * Makefile.in: Changed accordingly.
3110 * m68k-dis.c (ext_format_68881): Don't declare.
3111 (print_insn_m68k): If an instruction uses place 'i', it uses at
3112 least four fixed bytes.
3113 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3114 extended float, convert to double using floatformat_to_double, not
3115 ieee_extended_to_double, and fetch the data before converting it.
3117 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3119 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3120 davidj@ICSI.Berkeley.EDU (David Johnson).
3122 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3124 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3125 PowerPC uses bdnz[l][a].
3127 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3129 * dis-buf.c, i386-dis.c: Include sysdep.h.
3131 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3133 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3135 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3136 by Motorola PowerPC 601 with PPC_OPCODE_601.
3137 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3138 Disassemble Motorola PowerPC 601 instructions as well as normal
3139 PowerPC instructions.
3141 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3143 * i960-dis.c (reg, mem): Just use a static array instead of
3144 calling xmalloc.
3146 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3148 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3149 condition name index if this is for a negated condition.
3151 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3152 Floating point format for 'H' operand is backwards from normal
3153 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3154 operands (fmpyadd and fmpysub), handle bizarre register
3155 translation correctly for single precision format.
3157 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3158 or 'I' operands if the next format specifier is 'M' (fcmp
3159 condition completer).
3161 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3163 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3164 single number giving a bitmask for the MB and ME fields of an M
3165 form instruction. Change NB to accept 32, and turn it into 0;
3166 also turn 0 into 32 when disassembling. Seperated SH from NB.
3167 (insert_mbe, extract_mbe): New functions.
3168 (insert_nb, extract_nb): New functions.
3169 (SC_MASK): Mask out SA and LK bits.
3170 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3171 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3172 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3173 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3174 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3175 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3176 (powerpc_macros): Define table of macro definitions.
3177 (powerpc_num_macros): Define.
3179 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3180 if PPC_OPERAND_NEXT is set.
3182 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3184 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3185 char. Retrieve contents using bfd_getl32 instead of shifting.
3187 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3189 * ppc-opc.c: New file. Opcode table for PowerPC, including
3190 opcodes for POWER (RS/6000).
3191 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3192 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3193 (CFILES): Add ppc-dis.c.
3194 (ppc-dis.o, ppc-opc.o): New targets.
3195 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3197 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3199 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3200 No space before 'u', 'f', or 'N'.
3202 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3204 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3205 farther than we should.
3207 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3209 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3211 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3213 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3215 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3216 needs it, to prevent reading past the end of a section.
3218 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3220 * mips-opc.c: Use macro for j instruction, to support SVR4 PIC.
3221 Removed t,A case for la; always use t,A(b) case.
3223 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3225 From Ted Lemen <mellon@pepper.ncd.com>
3226 * mips-dis.c (print_insn_arg): Handle 'k'.
3227 * mips-opc.c: Make cache use k, not t.
3229 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3231 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3232 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3233 FLOAT_FORMAT_CODE to put out floating point register names.
3235 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3237 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3239 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3241 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3243 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3245 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3246 larger than 32. Moved dsxx32 variants first for disassembler.
3248 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3250 * z8kgen.c, z8k-opc.h: Add full lda information.
3252 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3254 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3255 movb instructions. Any necessary space will be emitted by
3256 the code to handle nullification completers.
3258 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3260 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3262 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3264 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3265 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3267 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3269 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3271 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3273 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3274 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3276 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3278 * m88k-dis.c (m88kdis): comment change. Remove space after
3279 printing mnemonic.
3280 (printop): handle new arg types DEC and XREG for m88110.
3282 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3284 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3285 type for absolute branch addresses. Delete special
3286 "ble" and "be" code in 'W' operand code.
3288 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3290 * mips-opc.c: Set hazard information correctly for branch
3291 likely instructions.
3293 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3295 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3296 info->fprintf_func for printing and info->print_address_func for
3297 address output.
3299 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3301 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3303 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3305 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3306 Corrected second case of "b" for disassembler.
3308 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3310 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3311 to BFD swapping routines to correspond to BFD name changes.
3313 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3315 * mips-opc.c: Change div machine instruction to be z,s,t rather
3316 than s,t. Change div macro to be d,v,t rather than d,s,t.
3317 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3318 rem and remu which generates only the corresponding div
3319 instruction. This is for compatibility with the MIPS assembler,
3320 which only generates the simple machine instruction when an
3321 explicit destination of $0 is used.
3322 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3324 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3326 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3327 WR_31 hazard for bal, bgezal, bltzal.
3329 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3331 * hppa-dis.c (print_insn_hppa): Use print function
3332 from within the disassemble_info, not fprintf_filtered.
3334 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3336 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3337 Law, law@cs.utah.edu.)
3339 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3341 * mips-opc.c ("absu"): Removed.
3342 ("dabs"): Added.
3344 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3346 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3347 Changed hazard information to distinguish between memory load
3348 delays and coprocessor load delays.
3350 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3352 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3354 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3356 * configure.in: Don't pass cpu to config.bfd.
3358 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3360 * m88k-dis.c (m88kdis): Make class unsigned.
3362 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3364 * alpha-dis.c (print_insn_alpha): One branch format case was
3365 missing the instruction name.
3367 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3369 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3370 Add the arch-specific auxiliary files.
3371 (OFILES): Remove the arch-specific auxiliary files
3372 and use BFD_MACHINES instead of DIS_LIBS.
3373 * configure.in: Set BFD_MACHINES based on --with-targets option.
3375 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3377 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3378 for swc1.
3380 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3382 * sparc-opc.c: Change CONST to const to deal with gcc
3383 -Dconst=__const -traditional.
3385 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3387 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3388 coprocessor instructions out of #if 0, and made them use new
3389 argument type "C".
3391 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3393 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3395 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3397 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3398 instruction, for use by the disassembler.
3400 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3401 hand-coded sign extensions that depended on 32-bit host ints.
3402 FIXME, we still depend on big-endian host bitfield ordering.
3403 (sparc_print_insn): Set the insn_info_valid field, and the
3404 other fields that describe the instruction being printed.
3406 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3408 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3409 `jmp' instead of just one of them.
3411 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3413 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3414 (fput_fp_reg_r): Renamed from fput_reg_r.
3415 (fput_fp_reg): New function.
3416 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3418 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3420 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3422 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3424 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3426 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3427 don't output a space.
3429 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3431 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3433 * mips-opc.c: New file, containing opcode table from
3434 ../include/opcode/mips.h.
3435 * Makefile.in: Add it.
3437 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3439 * m88k-dis.c: New file, moved in from gdb and changed to use the
3440 new dis-asm.h disassembler interface.
3441 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3442 (m88k-dis.o): New target.
3444 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3446 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3447 argument string const char * to correspond to opcode/mips.h.
3449 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3451 * mips-dis.c: Updated to account for name changes in new version
3452 of opcode/mips.h.
3453 * Makefile.in: Added header file dependencies.
3455 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3457 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3459 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3461 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3462 extend, rather than shifts.
3464 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3466 * Makefile.in: Undo 15 June change.
3468 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3470 * m68k-dis.c (print_insn_arg): Change return value to byte count
3471 or error code.
3472 * m68k-dis.c: Re-write to detect invalid operands before
3473 printing anything, so we can handle this the same way we
3474 handle invalid opcodes.
3476 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3478 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3480 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3482 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3483 header files.
3485 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3487 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3489 * configure.in: Do make sysdep.h link.
3490 * Makefile.in: Search ../include. Don't search ../bfd.
3492 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3494 Changes from Jeff Law, law@cs.utah.edu:
3495 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3496 Do not print a space before the completers specified by
3497 'a' and 'd'.
3499 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3501 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3502 defined, since gdb has been fixed.
3504 Changes from Jeff Law, law@cs.utah.edu:
3505 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3506 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3507 be a *disassemble_info, not a *FILE.
3508 * hppa-dis.c: Support 'd', '!', and 'a'.
3509 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3510 * hppa-dis.c: Delete cases which are no longer needed.
3512 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3514 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3516 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3518 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3519 H8/300-H opcodes.
3521 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3523 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3524 * configure.in: No longer need to configure to get sysdep.h.
3526 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3528 * Patches from Jeffrey Law <law@cs.utah.edu>.
3529 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3530 templates for 1.1 FP computational instructions.
3532 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3534 * h8500-dis.c (print_insn_h8500): Address argument is type
3535 bfd_vma.
3536 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3537 Ditto.
3539 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3540 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3542 * sparc-dis.c (compare_opcodes): Move static declaration to
3543 top-level.
3545 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3547 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3548 instruction, remove unimp hack from 'l' argument.
3550 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3552 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3553 happy.
3555 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3557 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3558 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3559 instructions.
3561 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3563 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3564 arrays of string pointers to 2-d arrays of chars, to save
3565 space.
3567 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3569 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3570 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3572 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3574 * hppa-dis.c: New file from Utah, adapted to new disassembler
3575 calling interface.
3576 * Makefile.in: Include it.
3578 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3580 * sh-dis.c, sh-opc.h: New files.
3582 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3584 * alpha-dis.c, alpha-opc.h: New files.
3586 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3588 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3589 value.
3591 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3593 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3595 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3597 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3598 const.
3600 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3602 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3603 and double percent signs a few places.
3605 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3607 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3608 Use info->print_address_func not print_address.
3610 * dis-buf.c (generic_print_address): New function.
3612 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3614 * Makefile.in: Add sparc-dis.c.
3615 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3616 From GDB:
3617 Add `add' instruction to the set that get checked
3618 for a preceding `sethi' in order to print an absolute address.
3619 * (print_insn): Disassembly prefers real instructions.
3620 (is_delayed_branch): Speed up.
3621 * sparc-opc.c: Add ALIAS bit to aliases. Fix up opcode tables.
3622 Still missing some float ops, and needs testing.
3623 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3624 F_ALIAS. Use printf, not fprintf, when not passing a file
3625 pointer...
3626 (compare_opcodes): Check that identical instructions have
3627 identical opcodes, complain otherwise.
3628 From binutils:
3629 * New 'm' arg.
3630 * Include reg_names.
3631 From neither:
3632 Use dis-asm.h/read_memory_func interface.
3634 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3636 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3637 deliberately return non-zero to setjmp from longjmp. Otherwise
3638 this code fails to compile.
3640 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3642 * m68k-dis.c: Fix prototype for fetch_arg().
3644 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3646 * dis-buf.c: New file, for new read_memory_func interface.
3647 Makefile.in (OFILES): Include it.
3648 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3649 Use new read_memory_func interface.
3651 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3653 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3654 * h8500-opc.h: Fix couple of opcodes.
3656 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3658 * Makefile.in: add dvi & installcheck targets
3660 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3662 * Makefile.in: Update for h8500-dis.c.
3664 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3666 * h8500-dis.c, h8500-opc.h: New files
3668 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3670 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3671 ../include/dis-asm.h.
3672 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3673 and ../gdb/m68k-pinsn.c).
3674 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3675 and ../gdb/i386-pinsn.c).
3676 * m68881-ext.c: New file. Moved definition of
3677 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3678 * Makefile.in: Adjust for new files.
3679 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3680 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3681 can be dis-assembled.
3683 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3685 * mips-dis.c (print_insn_arg): Now returns void.
3687 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3689 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3690 files that use the macros.
3692 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3694 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3695 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3696 (CFILES): Added mips-dis.c.
3698 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3700 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3701 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3703 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3705 * Makefile.in: Improve *clean rules.
3706 * configure.in: Allow a default host.
3708 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3710 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3711 files include other sysdep files
3713 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3715 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3717 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3719 * configure.in: For host support, use ../bfd/configure.host
3720 so it stays in sync with the ../bfd/hosts database.
3722 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3724 * configure.in: use cpu-vendor-os triple instead of nested cases
3726 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3728 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3729 *always* the wrong one.
3731 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3733 * z8kgen.c: added copyright info
3735 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3737 * z8k-dis.c (unparse_instr): prettier tabs
3738 * z8kgen.c z8k-opc.h: bug fixes in tables
3740 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3742 * configure.in: Add ncr* configuration.
3743 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3744 picayune ANSI compilers happy.
3746 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3748 * configure.in (i386): Make i386 and i486 synonymous for now.
3749 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3751 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3753 * Makefile.in (install): Fix typo.
3755 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3757 * Makefile.in (make): Remove obsolete crud.
3758 (sparc-opc.o): Avoid Sun Make VPATH bug.
3760 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3762 * Makefile.in: since there are no SUBDIRS, remove rule and
3763 references of subdir_do.
3765 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3767 * Makefile.in (install): Get the library name right here too.
3768 Don't install bfd.h, since it's unrelated to this library. No
3769 subdirs to recurse into, either.
3770 (CFILES): The source file has a .c suffix, not .o.
3772 * sparc-opc.c: New file, moved from BFD.
3773 * Makefile.in (OFILES): Build it.
3775 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3777 * z8k-dis.c: fixed forward refferences of some declarations.
3779 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3781 * Makefile.in: get the name of the library right
3783 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3785 * z8k-dis.c: knows how to disassemble z8k stuff
3786 * z8k-opc.h: new file full of z8000 opcodes
3788 Fri Aug 28 15:38:03 1992 Ken Raeburn (raeburn@cygnus.com)
3790 * Renamed opc-sparc.c to sparc-opc.c for systems with short
3791 filename constraints.
3792 * Makefile.in: Updated to reflect change.
3794 \f
3795 Copyright (C) 1992-1997 Free Software Foundation, Inc.
3797 Copying and distribution of this file, with or without modification,
3798 are permitted in any medium without royalty provided the copyright
3799 notice and this notice are preserved.
3801 Local Variables:
3802 mode: change-log
3803 left-margin: 8
3804 fill-column: 74
3805 version-control: never
3806 End: