1 /* Process record and replay target for GDB, the GNU debugger.
3 Copyright (C) 2013-2020 Free Software Foundation, Inc.
5 This file is part of GDB.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program. If not, see <http://www.gnu.org/licenses/>. */
23 #include "gdbthread.h"
25 #include "event-top.h"
26 #include "completer.h"
27 #include "arch-utils.h"
31 #include "record-full.h"
34 #include "gdbsupport/event-loop.h"
37 #include "observable.h"
39 #include "gdbsupport/gdb_unlinker.h"
40 #include "gdbsupport/byte-vector.h"
41 #include "async-event.h"
45 /* This module implements "target record-full", also known as "process
46 record and replay". This target sits on top of a "normal" target
47 (a target that "has execution"), and provides a record and replay
48 functionality, including reverse debugging.
50 Target record has two modes: recording, and replaying.
52 In record mode, we intercept the resume and wait methods.
53 Whenever gdb resumes the target, we run the target in single step
54 mode, and we build up an execution log in which, for each executed
55 instruction, we record all changes in memory and register state.
56 This is invisible to the user, to whom it just looks like an
57 ordinary debugging session (except for performance degradation).
59 In replay mode, instead of actually letting the inferior run as a
60 process, we simulate its execution by playing back the recorded
61 execution log. For each instruction in the log, we simulate the
62 instruction's side effects by duplicating the changes that it would
63 have made on memory and registers. */
65 #define DEFAULT_RECORD_FULL_INSN_MAX_NUM 200000
67 #define RECORD_FULL_IS_REPLAY \
68 (record_full_list->next || ::execution_direction == EXEC_REVERSE)
70 #define RECORD_FULL_FILE_MAGIC netorder32(0x20091016)
72 /* These are the core structs of the process record functionality.
74 A record_full_entry is a record of the value change of a register
75 ("record_full_reg") or a part of memory ("record_full_mem"). And each
76 instruction must have a struct record_full_entry ("record_full_end")
77 that indicates that this is the last struct record_full_entry of this
80 Each struct record_full_entry is linked to "record_full_list" by "prev"
81 and "next" pointers. */
83 struct record_full_mem_entry
87 /* Set this flag if target memory for this entry
88 can no longer be accessed. */
89 int mem_entry_not_accessible
;
93 gdb_byte buf
[sizeof (gdb_byte
*)];
97 struct record_full_reg_entry
104 gdb_byte buf
[2 * sizeof (gdb_byte
*)];
108 struct record_full_end_entry
110 enum gdb_signal sigval
;
114 enum record_full_type
121 /* This is the data structure that makes up the execution log.
123 The execution log consists of a single linked list of entries
124 of type "struct record_full_entry". It is doubly linked so that it
125 can be traversed in either direction.
127 The start of the list is anchored by a struct called
128 "record_full_first". The pointer "record_full_list" either points
129 to the last entry that was added to the list (in record mode), or to
130 the next entry in the list that will be executed (in replay mode).
132 Each list element (struct record_full_entry), in addition to next
133 and prev pointers, consists of a union of three entry types: mem,
134 reg, and end. A field called "type" determines which entry type is
135 represented by a given list element.
137 Each instruction that is added to the execution log is represented
138 by a variable number of list elements ('entries'). The instruction
139 will have one "reg" entry for each register that is changed by
140 executing the instruction (including the PC in every case). It
141 will also have one "mem" entry for each memory change. Finally,
142 each instruction will have an "end" entry that separates it from
143 the changes associated with the next instruction. */
145 struct record_full_entry
147 struct record_full_entry
*prev
;
148 struct record_full_entry
*next
;
149 enum record_full_type type
;
153 struct record_full_reg_entry reg
;
155 struct record_full_mem_entry mem
;
157 struct record_full_end_entry end
;
161 /* If true, query if PREC cannot record memory
162 change of next instruction. */
163 bool record_full_memory_query
= false;
165 struct record_full_core_buf_entry
167 struct record_full_core_buf_entry
*prev
;
168 struct target_section
*p
;
172 /* Record buf with core target. */
173 static detached_regcache
*record_full_core_regbuf
= NULL
;
174 static struct target_section
*record_full_core_start
;
175 static struct target_section
*record_full_core_end
;
176 static struct record_full_core_buf_entry
*record_full_core_buf_list
= NULL
;
178 /* The following variables are used for managing the linked list that
179 represents the execution log.
181 record_full_first is the anchor that holds down the beginning of
184 record_full_list serves two functions:
185 1) In record mode, it anchors the end of the list.
186 2) In replay mode, it traverses the list and points to
187 the next instruction that must be emulated.
189 record_full_arch_list_head and record_full_arch_list_tail are used
190 to manage a separate list, which is used to build up the change
191 elements of the currently executing instruction during record mode.
192 When this instruction has been completely annotated in the "arch
193 list", it will be appended to the main execution log. */
195 static struct record_full_entry record_full_first
;
196 static struct record_full_entry
*record_full_list
= &record_full_first
;
197 static struct record_full_entry
*record_full_arch_list_head
= NULL
;
198 static struct record_full_entry
*record_full_arch_list_tail
= NULL
;
200 /* true ask user. false auto delete the last struct record_full_entry. */
201 static bool record_full_stop_at_limit
= true;
202 /* Maximum allowed number of insns in execution log. */
203 static unsigned int record_full_insn_max_num
204 = DEFAULT_RECORD_FULL_INSN_MAX_NUM
;
205 /* Actual count of insns presently in execution log. */
206 static unsigned int record_full_insn_num
= 0;
207 /* Count of insns logged so far (may be larger
208 than count of insns presently in execution log). */
209 static ULONGEST record_full_insn_count
;
211 static const char record_longname
[]
212 = N_("Process record and replay target");
213 static const char record_doc
[]
214 = N_("Log program while executing and replay execution from log.");
216 /* Base class implementing functionality common to both the
217 "record-full" and "record-core" targets. */
219 class record_full_base_target
: public target_ops
222 const target_info
&info () const override
= 0;
224 strata
stratum () const override
{ return record_stratum
; }
226 void close () override
;
227 void async (int) override
;
228 ptid_t
wait (ptid_t
, struct target_waitstatus
*, int) override
;
229 bool stopped_by_watchpoint () override
;
230 bool stopped_data_address (CORE_ADDR
*) override
;
232 bool stopped_by_sw_breakpoint () override
;
233 bool supports_stopped_by_sw_breakpoint () override
;
235 bool stopped_by_hw_breakpoint () override
;
236 bool supports_stopped_by_hw_breakpoint () override
;
238 bool can_execute_reverse () override
;
240 /* Add bookmark target methods. */
241 gdb_byte
*get_bookmark (const char *, int) override
;
242 void goto_bookmark (const gdb_byte
*, int) override
;
243 enum exec_direction_kind
execution_direction () override
;
244 enum record_method
record_method (ptid_t ptid
) override
;
245 void info_record () override
;
246 void save_record (const char *filename
) override
;
247 bool supports_delete_record () override
;
248 void delete_record () override
;
249 bool record_is_replaying (ptid_t ptid
) override
;
250 bool record_will_replay (ptid_t ptid
, int dir
) override
;
251 void record_stop_replaying () override
;
252 void goto_record_begin () override
;
253 void goto_record_end () override
;
254 void goto_record (ULONGEST insn
) override
;
257 /* The "record-full" target. */
259 static const target_info record_full_target_info
= {
265 class record_full_target final
: public record_full_base_target
268 const target_info
&info () const override
269 { return record_full_target_info
; }
271 void commit_resume () override
;
272 void resume (ptid_t
, int, enum gdb_signal
) override
;
273 void disconnect (const char *, int) override
;
274 void detach (inferior
*, int) override
;
275 void mourn_inferior () override
;
276 void kill () override
;
277 void store_registers (struct regcache
*, int) override
;
278 enum target_xfer_status
xfer_partial (enum target_object object
,
281 const gdb_byte
*writebuf
,
282 ULONGEST offset
, ULONGEST len
,
283 ULONGEST
*xfered_len
) override
;
284 int insert_breakpoint (struct gdbarch
*,
285 struct bp_target_info
*) override
;
286 int remove_breakpoint (struct gdbarch
*,
287 struct bp_target_info
*,
288 enum remove_bp_reason
) override
;
291 /* The "record-core" target. */
293 static const target_info record_full_core_target_info
= {
299 class record_full_core_target final
: public record_full_base_target
302 const target_info
&info () const override
303 { return record_full_core_target_info
; }
305 void resume (ptid_t
, int, enum gdb_signal
) override
;
306 void disconnect (const char *, int) override
;
307 void kill () override
;
308 void fetch_registers (struct regcache
*regcache
, int regno
) override
;
309 void prepare_to_store (struct regcache
*regcache
) override
;
310 void store_registers (struct regcache
*, int) override
;
311 enum target_xfer_status
xfer_partial (enum target_object object
,
314 const gdb_byte
*writebuf
,
315 ULONGEST offset
, ULONGEST len
,
316 ULONGEST
*xfered_len
) override
;
317 int insert_breakpoint (struct gdbarch
*,
318 struct bp_target_info
*) override
;
319 int remove_breakpoint (struct gdbarch
*,
320 struct bp_target_info
*,
321 enum remove_bp_reason
) override
;
323 bool has_execution (inferior
*inf
) override
;
326 static record_full_target record_full_ops
;
327 static record_full_core_target record_full_core_ops
;
330 record_full_target::detach (inferior
*inf
, int from_tty
)
332 record_detach (this, inf
, from_tty
);
336 record_full_target::disconnect (const char *args
, int from_tty
)
338 record_disconnect (this, args
, from_tty
);
342 record_full_core_target::disconnect (const char *args
, int from_tty
)
344 record_disconnect (this, args
, from_tty
);
348 record_full_target::mourn_inferior ()
350 record_mourn_inferior (this);
354 record_full_target::kill ()
359 /* See record-full.h. */
362 record_full_is_used (void)
364 struct target_ops
*t
;
366 t
= find_record_target ();
367 return (t
== &record_full_ops
368 || t
== &record_full_core_ops
);
372 /* Command lists for "set/show record full". */
373 static struct cmd_list_element
*set_record_full_cmdlist
;
374 static struct cmd_list_element
*show_record_full_cmdlist
;
376 /* Command list for "record full". */
377 static struct cmd_list_element
*record_full_cmdlist
;
379 static void record_full_goto_insn (struct record_full_entry
*entry
,
380 enum exec_direction_kind dir
);
382 /* Alloc and free functions for record_full_reg, record_full_mem, and
383 record_full_end entries. */
385 /* Alloc a record_full_reg record entry. */
387 static inline struct record_full_entry
*
388 record_full_reg_alloc (struct regcache
*regcache
, int regnum
)
390 struct record_full_entry
*rec
;
391 struct gdbarch
*gdbarch
= regcache
->arch ();
393 rec
= XCNEW (struct record_full_entry
);
394 rec
->type
= record_full_reg
;
395 rec
->u
.reg
.num
= regnum
;
396 rec
->u
.reg
.len
= register_size (gdbarch
, regnum
);
397 if (rec
->u
.reg
.len
> sizeof (rec
->u
.reg
.u
.buf
))
398 rec
->u
.reg
.u
.ptr
= (gdb_byte
*) xmalloc (rec
->u
.reg
.len
);
403 /* Free a record_full_reg record entry. */
406 record_full_reg_release (struct record_full_entry
*rec
)
408 gdb_assert (rec
->type
== record_full_reg
);
409 if (rec
->u
.reg
.len
> sizeof (rec
->u
.reg
.u
.buf
))
410 xfree (rec
->u
.reg
.u
.ptr
);
414 /* Alloc a record_full_mem record entry. */
416 static inline struct record_full_entry
*
417 record_full_mem_alloc (CORE_ADDR addr
, int len
)
419 struct record_full_entry
*rec
;
421 rec
= XCNEW (struct record_full_entry
);
422 rec
->type
= record_full_mem
;
423 rec
->u
.mem
.addr
= addr
;
424 rec
->u
.mem
.len
= len
;
425 if (rec
->u
.mem
.len
> sizeof (rec
->u
.mem
.u
.buf
))
426 rec
->u
.mem
.u
.ptr
= (gdb_byte
*) xmalloc (len
);
431 /* Free a record_full_mem record entry. */
434 record_full_mem_release (struct record_full_entry
*rec
)
436 gdb_assert (rec
->type
== record_full_mem
);
437 if (rec
->u
.mem
.len
> sizeof (rec
->u
.mem
.u
.buf
))
438 xfree (rec
->u
.mem
.u
.ptr
);
442 /* Alloc a record_full_end record entry. */
444 static inline struct record_full_entry
*
445 record_full_end_alloc (void)
447 struct record_full_entry
*rec
;
449 rec
= XCNEW (struct record_full_entry
);
450 rec
->type
= record_full_end
;
455 /* Free a record_full_end record entry. */
458 record_full_end_release (struct record_full_entry
*rec
)
463 /* Free one record entry, any type.
464 Return entry->type, in case caller wants to know. */
466 static inline enum record_full_type
467 record_full_entry_release (struct record_full_entry
*rec
)
469 enum record_full_type type
= rec
->type
;
472 case record_full_reg
:
473 record_full_reg_release (rec
);
475 case record_full_mem
:
476 record_full_mem_release (rec
);
478 case record_full_end
:
479 record_full_end_release (rec
);
485 /* Free all record entries in list pointed to by REC. */
488 record_full_list_release (struct record_full_entry
*rec
)
499 record_full_entry_release (rec
->next
);
502 if (rec
== &record_full_first
)
504 record_full_insn_num
= 0;
505 record_full_first
.next
= NULL
;
508 record_full_entry_release (rec
);
511 /* Free all record entries forward of the given list position. */
514 record_full_list_release_following (struct record_full_entry
*rec
)
516 struct record_full_entry
*tmp
= rec
->next
;
522 if (record_full_entry_release (tmp
) == record_full_end
)
524 record_full_insn_num
--;
525 record_full_insn_count
--;
531 /* Delete the first instruction from the beginning of the log, to make
532 room for adding a new instruction at the end of the log.
534 Note -- this function does not modify record_full_insn_num. */
537 record_full_list_release_first (void)
539 struct record_full_entry
*tmp
;
541 if (!record_full_first
.next
)
544 /* Loop until a record_full_end. */
547 /* Cut record_full_first.next out of the linked list. */
548 tmp
= record_full_first
.next
;
549 record_full_first
.next
= tmp
->next
;
550 tmp
->next
->prev
= &record_full_first
;
552 /* tmp is now isolated, and can be deleted. */
553 if (record_full_entry_release (tmp
) == record_full_end
)
554 break; /* End loop at first record_full_end. */
556 if (!record_full_first
.next
)
558 gdb_assert (record_full_insn_num
== 1);
559 break; /* End loop when list is empty. */
564 /* Add a struct record_full_entry to record_full_arch_list. */
567 record_full_arch_list_add (struct record_full_entry
*rec
)
569 if (record_debug
> 1)
570 fprintf_unfiltered (gdb_stdlog
,
571 "Process record: record_full_arch_list_add %s.\n",
572 host_address_to_string (rec
));
574 if (record_full_arch_list_tail
)
576 record_full_arch_list_tail
->next
= rec
;
577 rec
->prev
= record_full_arch_list_tail
;
578 record_full_arch_list_tail
= rec
;
582 record_full_arch_list_head
= rec
;
583 record_full_arch_list_tail
= rec
;
587 /* Return the value storage location of a record entry. */
588 static inline gdb_byte
*
589 record_full_get_loc (struct record_full_entry
*rec
)
592 case record_full_mem
:
593 if (rec
->u
.mem
.len
> sizeof (rec
->u
.mem
.u
.buf
))
594 return rec
->u
.mem
.u
.ptr
;
596 return rec
->u
.mem
.u
.buf
;
597 case record_full_reg
:
598 if (rec
->u
.reg
.len
> sizeof (rec
->u
.reg
.u
.buf
))
599 return rec
->u
.reg
.u
.ptr
;
601 return rec
->u
.reg
.u
.buf
;
602 case record_full_end
:
604 gdb_assert_not_reached ("unexpected record_full_entry type");
609 /* Record the value of a register NUM to record_full_arch_list. */
612 record_full_arch_list_add_reg (struct regcache
*regcache
, int regnum
)
614 struct record_full_entry
*rec
;
616 if (record_debug
> 1)
617 fprintf_unfiltered (gdb_stdlog
,
618 "Process record: add register num = %d to "
622 rec
= record_full_reg_alloc (regcache
, regnum
);
624 regcache
->raw_read (regnum
, record_full_get_loc (rec
));
626 record_full_arch_list_add (rec
);
631 /* Record the value of a region of memory whose address is ADDR and
632 length is LEN to record_full_arch_list. */
635 record_full_arch_list_add_mem (CORE_ADDR addr
, int len
)
637 struct record_full_entry
*rec
;
639 if (record_debug
> 1)
640 fprintf_unfiltered (gdb_stdlog
,
641 "Process record: add mem addr = %s len = %d to "
643 paddress (target_gdbarch (), addr
), len
);
645 if (!addr
) /* FIXME: Why? Some arch must permit it... */
648 rec
= record_full_mem_alloc (addr
, len
);
650 if (record_read_memory (target_gdbarch (), addr
,
651 record_full_get_loc (rec
), len
))
653 record_full_mem_release (rec
);
657 record_full_arch_list_add (rec
);
662 /* Add a record_full_end type struct record_full_entry to
663 record_full_arch_list. */
666 record_full_arch_list_add_end (void)
668 struct record_full_entry
*rec
;
670 if (record_debug
> 1)
671 fprintf_unfiltered (gdb_stdlog
,
672 "Process record: add end to arch list.\n");
674 rec
= record_full_end_alloc ();
675 rec
->u
.end
.sigval
= GDB_SIGNAL_0
;
676 rec
->u
.end
.insn_num
= ++record_full_insn_count
;
678 record_full_arch_list_add (rec
);
684 record_full_check_insn_num (void)
686 if (record_full_insn_num
== record_full_insn_max_num
)
688 /* Ask user what to do. */
689 if (record_full_stop_at_limit
)
691 if (!yquery (_("Do you want to auto delete previous execution "
692 "log entries when record/replay buffer becomes "
693 "full (record full stop-at-limit)?")))
694 error (_("Process record: stopped by user."));
695 record_full_stop_at_limit
= 0;
700 /* Before inferior step (when GDB record the running message, inferior
701 only can step), GDB will call this function to record the values to
702 record_full_list. This function will call gdbarch_process_record to
703 record the running message of inferior and set them to
704 record_full_arch_list, and add it to record_full_list. */
707 record_full_message (struct regcache
*regcache
, enum gdb_signal signal
)
710 struct gdbarch
*gdbarch
= regcache
->arch ();
714 record_full_arch_list_head
= NULL
;
715 record_full_arch_list_tail
= NULL
;
717 /* Check record_full_insn_num. */
718 record_full_check_insn_num ();
720 /* If gdb sends a signal value to target_resume,
721 save it in the 'end' field of the previous instruction.
723 Maybe process record should record what really happened,
724 rather than what gdb pretends has happened.
726 So if Linux delivered the signal to the child process during
727 the record mode, we will record it and deliver it again in
730 If user says "ignore this signal" during the record mode, then
731 it will be ignored again during the replay mode (no matter if
732 the user says something different, like "deliver this signal"
733 during the replay mode).
735 User should understand that nothing he does during the replay
736 mode will change the behavior of the child. If he tries,
737 then that is a user error.
739 But we should still deliver the signal to gdb during the replay,
740 if we delivered it during the recording. Therefore we should
741 record the signal during record_full_wait, not
742 record_full_resume. */
743 if (record_full_list
!= &record_full_first
) /* FIXME better way
746 gdb_assert (record_full_list
->type
== record_full_end
);
747 record_full_list
->u
.end
.sigval
= signal
;
750 if (signal
== GDB_SIGNAL_0
751 || !gdbarch_process_record_signal_p (gdbarch
))
752 ret
= gdbarch_process_record (gdbarch
,
754 regcache_read_pc (regcache
));
756 ret
= gdbarch_process_record_signal (gdbarch
,
761 error (_("Process record: inferior program stopped."));
763 error (_("Process record: failed to record execution log."));
765 catch (const gdb_exception
&ex
)
767 record_full_list_release (record_full_arch_list_tail
);
771 record_full_list
->next
= record_full_arch_list_head
;
772 record_full_arch_list_head
->prev
= record_full_list
;
773 record_full_list
= record_full_arch_list_tail
;
775 if (record_full_insn_num
== record_full_insn_max_num
)
776 record_full_list_release_first ();
778 record_full_insn_num
++;
782 record_full_message_wrapper_safe (struct regcache
*regcache
,
783 enum gdb_signal signal
)
787 record_full_message (regcache
, signal
);
789 catch (const gdb_exception
&ex
)
791 exception_print (gdb_stderr
, ex
);
798 /* Set to 1 if record_full_store_registers and record_full_xfer_partial
799 doesn't need record. */
801 static int record_full_gdb_operation_disable
= 0;
803 scoped_restore_tmpl
<int>
804 record_full_gdb_operation_disable_set (void)
806 return make_scoped_restore (&record_full_gdb_operation_disable
, 1);
809 /* Flag set to TRUE for target_stopped_by_watchpoint. */
810 static enum target_stop_reason record_full_stop_reason
811 = TARGET_STOPPED_BY_NO_REASON
;
813 /* Execute one instruction from the record log. Each instruction in
814 the log will be represented by an arbitrary sequence of register
815 entries and memory entries, followed by an 'end' entry. */
818 record_full_exec_insn (struct regcache
*regcache
,
819 struct gdbarch
*gdbarch
,
820 struct record_full_entry
*entry
)
824 case record_full_reg
: /* reg */
826 gdb::byte_vector
reg (entry
->u
.reg
.len
);
828 if (record_debug
> 1)
829 fprintf_unfiltered (gdb_stdlog
,
830 "Process record: record_full_reg %s to "
831 "inferior num = %d.\n",
832 host_address_to_string (entry
),
835 regcache
->cooked_read (entry
->u
.reg
.num
, reg
.data ());
836 regcache
->cooked_write (entry
->u
.reg
.num
, record_full_get_loc (entry
));
837 memcpy (record_full_get_loc (entry
), reg
.data (), entry
->u
.reg
.len
);
841 case record_full_mem
: /* mem */
843 /* Nothing to do if the entry is flagged not_accessible. */
844 if (!entry
->u
.mem
.mem_entry_not_accessible
)
846 gdb::byte_vector
mem (entry
->u
.mem
.len
);
848 if (record_debug
> 1)
849 fprintf_unfiltered (gdb_stdlog
,
850 "Process record: record_full_mem %s to "
851 "inferior addr = %s len = %d.\n",
852 host_address_to_string (entry
),
853 paddress (gdbarch
, entry
->u
.mem
.addr
),
856 if (record_read_memory (gdbarch
,
857 entry
->u
.mem
.addr
, mem
.data (),
859 entry
->u
.mem
.mem_entry_not_accessible
= 1;
862 if (target_write_memory (entry
->u
.mem
.addr
,
863 record_full_get_loc (entry
),
866 entry
->u
.mem
.mem_entry_not_accessible
= 1;
868 warning (_("Process record: error writing memory at "
869 "addr = %s len = %d."),
870 paddress (gdbarch
, entry
->u
.mem
.addr
),
875 memcpy (record_full_get_loc (entry
), mem
.data (),
878 /* We've changed memory --- check if a hardware
879 watchpoint should trap. Note that this
880 presently assumes the target beneath supports
881 continuable watchpoints. On non-continuable
882 watchpoints target, we'll want to check this
883 _before_ actually doing the memory change, and
884 not doing the change at all if the watchpoint
886 if (hardware_watchpoint_inserted_in_range
887 (regcache
->aspace (),
888 entry
->u
.mem
.addr
, entry
->u
.mem
.len
))
889 record_full_stop_reason
= TARGET_STOPPED_BY_WATCHPOINT
;
898 static void record_full_restore (void);
900 /* Asynchronous signal handle registered as event loop source for when
901 we have pending events ready to be passed to the core. */
903 static struct async_event_handler
*record_full_async_inferior_event_token
;
906 record_full_async_inferior_event_handler (gdb_client_data data
)
908 inferior_event_handler (INF_REG_EVENT
);
911 /* Open the process record target for 'core' files. */
914 record_full_core_open_1 (const char *name
, int from_tty
)
916 struct regcache
*regcache
= get_current_regcache ();
917 int regnum
= gdbarch_num_regs (regcache
->arch ());
920 /* Get record_full_core_regbuf. */
921 target_fetch_registers (regcache
, -1);
922 record_full_core_regbuf
= new detached_regcache (regcache
->arch (), false);
924 for (i
= 0; i
< regnum
; i
++)
925 record_full_core_regbuf
->raw_supply (i
, *regcache
);
927 /* Get record_full_core_start and record_full_core_end. */
928 if (build_section_table (core_bfd
, &record_full_core_start
,
929 &record_full_core_end
))
931 delete record_full_core_regbuf
;
932 record_full_core_regbuf
= NULL
;
933 error (_("\"%s\": Can't find sections: %s"),
934 bfd_get_filename (core_bfd
), bfd_errmsg (bfd_get_error ()));
937 push_target (&record_full_core_ops
);
938 record_full_restore ();
941 /* Open the process record target for 'live' processes. */
944 record_full_open_1 (const char *name
, int from_tty
)
947 fprintf_unfiltered (gdb_stdlog
, "Process record: record_full_open_1\n");
950 if (!target_has_execution
)
951 error (_("Process record: the program is not being run."));
953 error (_("Process record target can't debug inferior in non-stop mode "
956 if (!gdbarch_process_record_p (target_gdbarch ()))
957 error (_("Process record: the current architecture doesn't support "
958 "record function."));
960 push_target (&record_full_ops
);
963 static void record_full_init_record_breakpoints (void);
965 /* Open the process record target. */
968 record_full_open (const char *name
, int from_tty
)
971 fprintf_unfiltered (gdb_stdlog
, "Process record: record_full_open\n");
976 record_full_insn_num
= 0;
977 record_full_insn_count
= 0;
978 record_full_list
= &record_full_first
;
979 record_full_list
->next
= NULL
;
982 record_full_core_open_1 (name
, from_tty
);
984 record_full_open_1 (name
, from_tty
);
986 /* Register extra event sources in the event loop. */
987 record_full_async_inferior_event_token
988 = create_async_event_handler (record_full_async_inferior_event_handler
,
991 record_full_init_record_breakpoints ();
993 gdb::observers::record_changed
.notify (current_inferior (), 1, "full", NULL
);
996 /* "close" target method. Close the process record target. */
999 record_full_base_target::close ()
1001 struct record_full_core_buf_entry
*entry
;
1004 fprintf_unfiltered (gdb_stdlog
, "Process record: record_full_close\n");
1006 record_full_list_release (record_full_list
);
1008 /* Release record_full_core_regbuf. */
1009 if (record_full_core_regbuf
)
1011 delete record_full_core_regbuf
;
1012 record_full_core_regbuf
= NULL
;
1015 /* Release record_full_core_buf_list. */
1016 while (record_full_core_buf_list
)
1018 entry
= record_full_core_buf_list
;
1019 record_full_core_buf_list
= record_full_core_buf_list
->prev
;
1023 if (record_full_async_inferior_event_token
)
1024 delete_async_event_handler (&record_full_async_inferior_event_token
);
1027 /* "async" target method. */
1030 record_full_base_target::async (int enable
)
1033 mark_async_event_handler (record_full_async_inferior_event_token
);
1035 clear_async_event_handler (record_full_async_inferior_event_token
);
1037 beneath ()->async (enable
);
1040 /* The PTID and STEP arguments last passed to
1041 record_full_target::resume. */
1042 static ptid_t record_full_resume_ptid
= null_ptid
;
1043 static int record_full_resume_step
= 0;
1045 /* True if we've been resumed, and so each record_full_wait call should
1046 advance execution. If this is false, record_full_wait will return a
1047 TARGET_WAITKIND_IGNORE. */
1048 static int record_full_resumed
= 0;
1050 /* The execution direction of the last resume we got. This is
1051 necessary for async mode. Vis (order is not strictly accurate):
1053 1. user has the global execution direction set to forward
1054 2. user does a reverse-step command
1055 3. record_full_resume is called with global execution direction
1056 temporarily switched to reverse
1057 4. GDB's execution direction is reverted back to forward
1058 5. target record notifies event loop there's an event to handle
1059 6. infrun asks the target which direction was it going, and switches
1060 the global execution direction accordingly (to reverse)
1061 7. infrun polls an event out of the record target, and handles it
1062 8. GDB goes back to the event loop, and goto #4.
1064 static enum exec_direction_kind record_full_execution_dir
= EXEC_FORWARD
;
1066 /* "resume" target method. Resume the process record target. */
1069 record_full_target::resume (ptid_t ptid
, int step
, enum gdb_signal signal
)
1071 record_full_resume_ptid
= inferior_ptid
;
1072 record_full_resume_step
= step
;
1073 record_full_resumed
= 1;
1074 record_full_execution_dir
= ::execution_direction
;
1076 if (!RECORD_FULL_IS_REPLAY
)
1078 struct gdbarch
*gdbarch
= target_thread_architecture (ptid
);
1080 record_full_message (get_current_regcache (), signal
);
1084 /* This is not hard single step. */
1085 if (!gdbarch_software_single_step_p (gdbarch
))
1087 /* This is a normal continue. */
1092 /* This arch supports soft single step. */
1093 if (thread_has_single_step_breakpoints_set (inferior_thread ()))
1095 /* This is a soft single step. */
1096 record_full_resume_step
= 1;
1099 step
= !insert_single_step_breakpoints (gdbarch
);
1103 /* Make sure the target beneath reports all signals. */
1104 target_pass_signals ({});
1106 this->beneath ()->resume (ptid
, step
, signal
);
1109 /* We are about to start executing the inferior (or simulate it),
1110 let's register it with the event loop. */
1111 if (target_can_async_p ())
1115 /* "commit_resume" method for process record target. */
1118 record_full_target::commit_resume ()
1120 if (!RECORD_FULL_IS_REPLAY
)
1121 beneath ()->commit_resume ();
1124 static int record_full_get_sig
= 0;
1126 /* SIGINT signal handler, registered by "wait" method. */
1129 record_full_sig_handler (int signo
)
1132 fprintf_unfiltered (gdb_stdlog
, "Process record: get a signal\n");
1134 /* It will break the running inferior in replay mode. */
1135 record_full_resume_step
= 1;
1137 /* It will let record_full_wait set inferior status to get the signal
1139 record_full_get_sig
= 1;
1142 /* "wait" target method for process record target.
1144 In record mode, the target is always run in singlestep mode
1145 (even when gdb says to continue). The wait method intercepts
1146 the stop events and determines which ones are to be passed on to
1147 gdb. Most stop events are just singlestep events that gdb is not
1148 to know about, so the wait method just records them and keeps
1151 In replay mode, this function emulates the recorded execution log,
1152 one instruction at a time (forward or backward), and determines
1156 record_full_wait_1 (struct target_ops
*ops
,
1157 ptid_t ptid
, struct target_waitstatus
*status
,
1160 scoped_restore restore_operation_disable
1161 = record_full_gdb_operation_disable_set ();
1164 fprintf_unfiltered (gdb_stdlog
,
1165 "Process record: record_full_wait "
1166 "record_full_resume_step = %d, "
1167 "record_full_resumed = %d, direction=%s\n",
1168 record_full_resume_step
, record_full_resumed
,
1169 record_full_execution_dir
== EXEC_FORWARD
1170 ? "forward" : "reverse");
1172 if (!record_full_resumed
)
1174 gdb_assert ((options
& TARGET_WNOHANG
) != 0);
1176 /* No interesting event. */
1177 status
->kind
= TARGET_WAITKIND_IGNORE
;
1178 return minus_one_ptid
;
1181 record_full_get_sig
= 0;
1182 signal (SIGINT
, record_full_sig_handler
);
1184 record_full_stop_reason
= TARGET_STOPPED_BY_NO_REASON
;
1186 if (!RECORD_FULL_IS_REPLAY
&& ops
!= &record_full_core_ops
)
1188 if (record_full_resume_step
)
1190 /* This is a single step. */
1191 return ops
->beneath ()->wait (ptid
, status
, options
);
1195 /* This is not a single step. */
1198 struct gdbarch
*gdbarch
1199 = target_thread_architecture (record_full_resume_ptid
);
1203 ret
= ops
->beneath ()->wait (ptid
, status
, options
);
1204 if (status
->kind
== TARGET_WAITKIND_IGNORE
)
1207 fprintf_unfiltered (gdb_stdlog
,
1208 "Process record: record_full_wait "
1209 "target beneath not done yet\n");
1213 for (thread_info
*tp
: all_non_exited_threads ())
1214 delete_single_step_breakpoints (tp
);
1216 if (record_full_resume_step
)
1219 /* Is this a SIGTRAP? */
1220 if (status
->kind
== TARGET_WAITKIND_STOPPED
1221 && status
->value
.sig
== GDB_SIGNAL_TRAP
)
1223 struct regcache
*regcache
;
1224 enum target_stop_reason
*stop_reason_p
1225 = &record_full_stop_reason
;
1227 /* Yes -- this is likely our single-step finishing,
1228 but check if there's any reason the core would be
1229 interested in the event. */
1231 registers_changed ();
1232 switch_to_thread (current_inferior ()->process_target (),
1234 regcache
= get_current_regcache ();
1235 tmp_pc
= regcache_read_pc (regcache
);
1236 const struct address_space
*aspace
= regcache
->aspace ();
1238 if (target_stopped_by_watchpoint ())
1240 /* Always interested in watchpoints. */
1242 else if (record_check_stopped_by_breakpoint (aspace
, tmp_pc
,
1245 /* There is a breakpoint here. Let the core
1250 /* This is a single-step trap. Record the
1251 insn and issue another step.
1252 FIXME: this part can be a random SIGTRAP too.
1253 But GDB cannot handle it. */
1256 if (!record_full_message_wrapper_safe (regcache
,
1259 status
->kind
= TARGET_WAITKIND_STOPPED
;
1260 status
->value
.sig
= GDB_SIGNAL_0
;
1264 if (gdbarch_software_single_step_p (gdbarch
))
1266 process_stratum_target
*proc_target
1267 = current_inferior ()->process_target ();
1269 /* Try to insert the software single step breakpoint.
1270 If insert success, set step to 0. */
1271 set_executing (proc_target
, inferior_ptid
, false);
1272 reinit_frame_cache ();
1274 step
= !insert_single_step_breakpoints (gdbarch
);
1276 set_executing (proc_target
, inferior_ptid
, true);
1280 fprintf_unfiltered (gdb_stdlog
,
1281 "Process record: record_full_wait "
1282 "issuing one more step in the "
1283 "target beneath\n");
1284 ops
->beneath ()->resume (ptid
, step
, GDB_SIGNAL_0
);
1285 ops
->beneath ()->commit_resume ();
1290 /* The inferior is broken by a breakpoint or a signal. */
1299 switch_to_thread (current_inferior ()->process_target (),
1300 record_full_resume_ptid
);
1301 struct regcache
*regcache
= get_current_regcache ();
1302 struct gdbarch
*gdbarch
= regcache
->arch ();
1303 const struct address_space
*aspace
= regcache
->aspace ();
1304 int continue_flag
= 1;
1305 int first_record_full_end
= 1;
1311 record_full_stop_reason
= TARGET_STOPPED_BY_NO_REASON
;
1312 status
->kind
= TARGET_WAITKIND_STOPPED
;
1314 /* Check breakpoint when forward execute. */
1315 if (execution_direction
== EXEC_FORWARD
)
1317 tmp_pc
= regcache_read_pc (regcache
);
1318 if (record_check_stopped_by_breakpoint (aspace
, tmp_pc
,
1319 &record_full_stop_reason
))
1322 fprintf_unfiltered (gdb_stdlog
,
1323 "Process record: break at %s.\n",
1324 paddress (gdbarch
, tmp_pc
));
1329 /* If GDB is in terminal_inferior mode, it will not get the
1330 signal. And in GDB replay mode, GDB doesn't need to be
1331 in terminal_inferior mode, because inferior will not
1332 executed. Then set it to terminal_ours to make GDB get
1334 target_terminal::ours ();
1336 /* In EXEC_FORWARD mode, record_full_list points to the tail of prev
1338 if (execution_direction
== EXEC_FORWARD
&& record_full_list
->next
)
1339 record_full_list
= record_full_list
->next
;
1341 /* Loop over the record_full_list, looking for the next place to
1345 /* Check for beginning and end of log. */
1346 if (execution_direction
== EXEC_REVERSE
1347 && record_full_list
== &record_full_first
)
1349 /* Hit beginning of record log in reverse. */
1350 status
->kind
= TARGET_WAITKIND_NO_HISTORY
;
1353 if (execution_direction
!= EXEC_REVERSE
1354 && !record_full_list
->next
)
1356 /* Hit end of record log going forward. */
1357 status
->kind
= TARGET_WAITKIND_NO_HISTORY
;
1361 record_full_exec_insn (regcache
, gdbarch
, record_full_list
);
1363 if (record_full_list
->type
== record_full_end
)
1365 if (record_debug
> 1)
1368 "Process record: record_full_end %s to "
1370 host_address_to_string (record_full_list
));
1372 if (first_record_full_end
1373 && execution_direction
== EXEC_REVERSE
)
1375 /* When reverse execute, the first
1376 record_full_end is the part of current
1378 first_record_full_end
= 0;
1382 /* In EXEC_REVERSE mode, this is the
1383 record_full_end of prev instruction. In
1384 EXEC_FORWARD mode, this is the
1385 record_full_end of current instruction. */
1387 if (record_full_resume_step
)
1389 if (record_debug
> 1)
1390 fprintf_unfiltered (gdb_stdlog
,
1391 "Process record: step.\n");
1395 /* check breakpoint */
1396 tmp_pc
= regcache_read_pc (regcache
);
1397 if (record_check_stopped_by_breakpoint
1398 (aspace
, tmp_pc
, &record_full_stop_reason
))
1401 fprintf_unfiltered (gdb_stdlog
,
1402 "Process record: break "
1404 paddress (gdbarch
, tmp_pc
));
1409 if (record_full_stop_reason
1410 == TARGET_STOPPED_BY_WATCHPOINT
)
1413 fprintf_unfiltered (gdb_stdlog
,
1414 "Process record: hit hw "
1418 /* Check target signal */
1419 if (record_full_list
->u
.end
.sigval
!= GDB_SIGNAL_0
)
1420 /* FIXME: better way to check */
1427 if (execution_direction
== EXEC_REVERSE
)
1429 if (record_full_list
->prev
)
1430 record_full_list
= record_full_list
->prev
;
1434 if (record_full_list
->next
)
1435 record_full_list
= record_full_list
->next
;
1439 while (continue_flag
);
1442 if (record_full_get_sig
)
1443 status
->value
.sig
= GDB_SIGNAL_INT
;
1444 else if (record_full_list
->u
.end
.sigval
!= GDB_SIGNAL_0
)
1445 /* FIXME: better way to check */
1446 status
->value
.sig
= record_full_list
->u
.end
.sigval
;
1448 status
->value
.sig
= GDB_SIGNAL_TRAP
;
1450 catch (const gdb_exception
&ex
)
1452 if (execution_direction
== EXEC_REVERSE
)
1454 if (record_full_list
->next
)
1455 record_full_list
= record_full_list
->next
;
1458 record_full_list
= record_full_list
->prev
;
1464 signal (SIGINT
, handle_sigint
);
1466 return inferior_ptid
;
1470 record_full_base_target::wait (ptid_t ptid
, struct target_waitstatus
*status
,
1475 return_ptid
= record_full_wait_1 (this, ptid
, status
, options
);
1476 if (status
->kind
!= TARGET_WAITKIND_IGNORE
)
1478 /* We're reporting a stop. Make sure any spurious
1479 target_wait(WNOHANG) doesn't advance the target until the
1480 core wants us resumed again. */
1481 record_full_resumed
= 0;
1487 record_full_base_target::stopped_by_watchpoint ()
1489 if (RECORD_FULL_IS_REPLAY
)
1490 return record_full_stop_reason
== TARGET_STOPPED_BY_WATCHPOINT
;
1492 return beneath ()->stopped_by_watchpoint ();
1496 record_full_base_target::stopped_data_address (CORE_ADDR
*addr_p
)
1498 if (RECORD_FULL_IS_REPLAY
)
1501 return this->beneath ()->stopped_data_address (addr_p
);
1504 /* The stopped_by_sw_breakpoint method of target record-full. */
1507 record_full_base_target::stopped_by_sw_breakpoint ()
1509 return record_full_stop_reason
== TARGET_STOPPED_BY_SW_BREAKPOINT
;
1512 /* The supports_stopped_by_sw_breakpoint method of target
1516 record_full_base_target::supports_stopped_by_sw_breakpoint ()
1521 /* The stopped_by_hw_breakpoint method of target record-full. */
1524 record_full_base_target::stopped_by_hw_breakpoint ()
1526 return record_full_stop_reason
== TARGET_STOPPED_BY_HW_BREAKPOINT
;
1529 /* The supports_stopped_by_sw_breakpoint method of target
1533 record_full_base_target::supports_stopped_by_hw_breakpoint ()
1538 /* Record registers change (by user or by GDB) to list as an instruction. */
1541 record_full_registers_change (struct regcache
*regcache
, int regnum
)
1543 /* Check record_full_insn_num. */
1544 record_full_check_insn_num ();
1546 record_full_arch_list_head
= NULL
;
1547 record_full_arch_list_tail
= NULL
;
1553 for (i
= 0; i
< gdbarch_num_regs (regcache
->arch ()); i
++)
1555 if (record_full_arch_list_add_reg (regcache
, i
))
1557 record_full_list_release (record_full_arch_list_tail
);
1558 error (_("Process record: failed to record execution log."));
1564 if (record_full_arch_list_add_reg (regcache
, regnum
))
1566 record_full_list_release (record_full_arch_list_tail
);
1567 error (_("Process record: failed to record execution log."));
1570 if (record_full_arch_list_add_end ())
1572 record_full_list_release (record_full_arch_list_tail
);
1573 error (_("Process record: failed to record execution log."));
1575 record_full_list
->next
= record_full_arch_list_head
;
1576 record_full_arch_list_head
->prev
= record_full_list
;
1577 record_full_list
= record_full_arch_list_tail
;
1579 if (record_full_insn_num
== record_full_insn_max_num
)
1580 record_full_list_release_first ();
1582 record_full_insn_num
++;
1585 /* "store_registers" method for process record target. */
1588 record_full_target::store_registers (struct regcache
*regcache
, int regno
)
1590 if (!record_full_gdb_operation_disable
)
1592 if (RECORD_FULL_IS_REPLAY
)
1596 /* Let user choose if he wants to write register or not. */
1599 query (_("Because GDB is in replay mode, changing the "
1600 "value of a register will make the execution "
1601 "log unusable from this point onward. "
1602 "Change all registers?"));
1605 query (_("Because GDB is in replay mode, changing the value "
1606 "of a register will make the execution log unusable "
1607 "from this point onward. Change register %s?"),
1608 gdbarch_register_name (regcache
->arch (),
1613 /* Invalidate the value of regcache that was set in function
1614 "regcache_raw_write". */
1620 i
< gdbarch_num_regs (regcache
->arch ());
1622 regcache
->invalidate (i
);
1625 regcache
->invalidate (regno
);
1627 error (_("Process record canceled the operation."));
1630 /* Destroy the record from here forward. */
1631 record_full_list_release_following (record_full_list
);
1634 record_full_registers_change (regcache
, regno
);
1636 this->beneath ()->store_registers (regcache
, regno
);
1639 /* "xfer_partial" method. Behavior is conditional on
1640 RECORD_FULL_IS_REPLAY.
1641 In replay mode, we cannot write memory unles we are willing to
1642 invalidate the record/replay log from this point forward. */
1644 enum target_xfer_status
1645 record_full_target::xfer_partial (enum target_object object
,
1646 const char *annex
, gdb_byte
*readbuf
,
1647 const gdb_byte
*writebuf
, ULONGEST offset
,
1648 ULONGEST len
, ULONGEST
*xfered_len
)
1650 if (!record_full_gdb_operation_disable
1651 && (object
== TARGET_OBJECT_MEMORY
1652 || object
== TARGET_OBJECT_RAW_MEMORY
) && writebuf
)
1654 if (RECORD_FULL_IS_REPLAY
)
1656 /* Let user choose if he wants to write memory or not. */
1657 if (!query (_("Because GDB is in replay mode, writing to memory "
1658 "will make the execution log unusable from this "
1659 "point onward. Write memory at address %s?"),
1660 paddress (target_gdbarch (), offset
)))
1661 error (_("Process record canceled the operation."));
1663 /* Destroy the record from here forward. */
1664 record_full_list_release_following (record_full_list
);
1667 /* Check record_full_insn_num */
1668 record_full_check_insn_num ();
1670 /* Record registers change to list as an instruction. */
1671 record_full_arch_list_head
= NULL
;
1672 record_full_arch_list_tail
= NULL
;
1673 if (record_full_arch_list_add_mem (offset
, len
))
1675 record_full_list_release (record_full_arch_list_tail
);
1677 fprintf_unfiltered (gdb_stdlog
,
1678 "Process record: failed to record "
1680 return TARGET_XFER_E_IO
;
1682 if (record_full_arch_list_add_end ())
1684 record_full_list_release (record_full_arch_list_tail
);
1686 fprintf_unfiltered (gdb_stdlog
,
1687 "Process record: failed to record "
1689 return TARGET_XFER_E_IO
;
1691 record_full_list
->next
= record_full_arch_list_head
;
1692 record_full_arch_list_head
->prev
= record_full_list
;
1693 record_full_list
= record_full_arch_list_tail
;
1695 if (record_full_insn_num
== record_full_insn_max_num
)
1696 record_full_list_release_first ();
1698 record_full_insn_num
++;
1701 return this->beneath ()->xfer_partial (object
, annex
, readbuf
, writebuf
,
1702 offset
, len
, xfered_len
);
1705 /* This structure represents a breakpoint inserted while the record
1706 target is active. We use this to know when to install/remove
1707 breakpoints in/from the target beneath. For example, a breakpoint
1708 may be inserted while recording, but removed when not replaying nor
1709 recording. In that case, the breakpoint had not been inserted on
1710 the target beneath, so we should not try to remove it there. */
1712 struct record_full_breakpoint
1714 record_full_breakpoint (struct address_space
*address_space_
,
1716 bool in_target_beneath_
)
1717 : address_space (address_space_
),
1719 in_target_beneath (in_target_beneath_
)
1723 /* The address and address space the breakpoint was set at. */
1724 struct address_space
*address_space
;
1727 /* True when the breakpoint has been also installed in the target
1728 beneath. This will be false for breakpoints set during replay or
1730 bool in_target_beneath
;
1733 /* The list of breakpoints inserted while the record target is
1735 static std::vector
<record_full_breakpoint
> record_full_breakpoints
;
1738 record_full_sync_record_breakpoints (struct bp_location
*loc
, void *data
)
1740 if (loc
->loc_type
!= bp_loc_software_breakpoint
)
1745 record_full_breakpoints
.emplace_back
1746 (loc
->target_info
.placed_address_space
,
1747 loc
->target_info
.placed_address
,
1752 /* Sync existing breakpoints to record_full_breakpoints. */
1755 record_full_init_record_breakpoints (void)
1757 record_full_breakpoints
.clear ();
1759 iterate_over_bp_locations (record_full_sync_record_breakpoints
);
1762 /* Behavior is conditional on RECORD_FULL_IS_REPLAY. We will not actually
1763 insert or remove breakpoints in the real target when replaying, nor
1767 record_full_target::insert_breakpoint (struct gdbarch
*gdbarch
,
1768 struct bp_target_info
*bp_tgt
)
1770 bool in_target_beneath
= false;
1772 if (!RECORD_FULL_IS_REPLAY
)
1774 /* When recording, we currently always single-step, so we don't
1775 really need to install regular breakpoints in the inferior.
1776 However, we do have to insert software single-step
1777 breakpoints, in case the target can't hardware step. To keep
1778 things simple, we always insert. */
1780 scoped_restore restore_operation_disable
1781 = record_full_gdb_operation_disable_set ();
1783 int ret
= this->beneath ()->insert_breakpoint (gdbarch
, bp_tgt
);
1787 in_target_beneath
= true;
1790 /* Use the existing entries if found in order to avoid duplication
1791 in record_full_breakpoints. */
1793 for (const record_full_breakpoint
&bp
: record_full_breakpoints
)
1795 if (bp
.addr
== bp_tgt
->placed_address
1796 && bp
.address_space
== bp_tgt
->placed_address_space
)
1798 gdb_assert (bp
.in_target_beneath
== in_target_beneath
);
1803 record_full_breakpoints
.emplace_back (bp_tgt
->placed_address_space
,
1804 bp_tgt
->placed_address
,
1809 /* "remove_breakpoint" method for process record target. */
1812 record_full_target::remove_breakpoint (struct gdbarch
*gdbarch
,
1813 struct bp_target_info
*bp_tgt
,
1814 enum remove_bp_reason reason
)
1816 for (auto iter
= record_full_breakpoints
.begin ();
1817 iter
!= record_full_breakpoints
.end ();
1820 struct record_full_breakpoint
&bp
= *iter
;
1822 if (bp
.addr
== bp_tgt
->placed_address
1823 && bp
.address_space
== bp_tgt
->placed_address_space
)
1825 if (bp
.in_target_beneath
)
1827 scoped_restore restore_operation_disable
1828 = record_full_gdb_operation_disable_set ();
1830 int ret
= this->beneath ()->remove_breakpoint (gdbarch
, bp_tgt
,
1836 if (reason
== REMOVE_BREAKPOINT
)
1837 unordered_remove (record_full_breakpoints
, iter
);
1842 gdb_assert_not_reached ("removing unknown breakpoint");
1845 /* "can_execute_reverse" method for process record target. */
1848 record_full_base_target::can_execute_reverse ()
1853 /* "get_bookmark" method for process record and prec over core. */
1856 record_full_base_target::get_bookmark (const char *args
, int from_tty
)
1860 /* Return stringified form of instruction count. */
1861 if (record_full_list
&& record_full_list
->type
== record_full_end
)
1862 ret
= xstrdup (pulongest (record_full_list
->u
.end
.insn_num
));
1867 fprintf_unfiltered (gdb_stdlog
,
1868 "record_full_get_bookmark returns %s\n", ret
);
1870 fprintf_unfiltered (gdb_stdlog
,
1871 "record_full_get_bookmark returns NULL\n");
1873 return (gdb_byte
*) ret
;
1876 /* "goto_bookmark" method for process record and prec over core. */
1879 record_full_base_target::goto_bookmark (const gdb_byte
*raw_bookmark
,
1882 const char *bookmark
= (const char *) raw_bookmark
;
1885 fprintf_unfiltered (gdb_stdlog
,
1886 "record_full_goto_bookmark receives %s\n", bookmark
);
1888 std::string name_holder
;
1889 if (bookmark
[0] == '\'' || bookmark
[0] == '\"')
1891 if (bookmark
[strlen (bookmark
) - 1] != bookmark
[0])
1892 error (_("Unbalanced quotes: %s"), bookmark
);
1894 name_holder
= std::string (bookmark
+ 1, strlen (bookmark
) - 2);
1895 bookmark
= name_holder
.c_str ();
1898 record_goto (bookmark
);
1901 enum exec_direction_kind
1902 record_full_base_target::execution_direction ()
1904 return record_full_execution_dir
;
1907 /* The record_method method of target record-full. */
1910 record_full_base_target::record_method (ptid_t ptid
)
1912 return RECORD_METHOD_FULL
;
1916 record_full_base_target::info_record ()
1918 struct record_full_entry
*p
;
1920 if (RECORD_FULL_IS_REPLAY
)
1921 printf_filtered (_("Replay mode:\n"));
1923 printf_filtered (_("Record mode:\n"));
1925 /* Find entry for first actual instruction in the log. */
1926 for (p
= record_full_first
.next
;
1927 p
!= NULL
&& p
->type
!= record_full_end
;
1931 /* Do we have a log at all? */
1932 if (p
!= NULL
&& p
->type
== record_full_end
)
1934 /* Display instruction number for first instruction in the log. */
1935 printf_filtered (_("Lowest recorded instruction number is %s.\n"),
1936 pulongest (p
->u
.end
.insn_num
));
1938 /* If in replay mode, display where we are in the log. */
1939 if (RECORD_FULL_IS_REPLAY
)
1940 printf_filtered (_("Current instruction number is %s.\n"),
1941 pulongest (record_full_list
->u
.end
.insn_num
));
1943 /* Display instruction number for last instruction in the log. */
1944 printf_filtered (_("Highest recorded instruction number is %s.\n"),
1945 pulongest (record_full_insn_count
));
1947 /* Display log count. */
1948 printf_filtered (_("Log contains %u instructions.\n"),
1949 record_full_insn_num
);
1952 printf_filtered (_("No instructions have been logged.\n"));
1954 /* Display max log size. */
1955 printf_filtered (_("Max logged instructions is %u.\n"),
1956 record_full_insn_max_num
);
1960 record_full_base_target::supports_delete_record ()
1965 /* The "delete_record" target method. */
1968 record_full_base_target::delete_record ()
1970 record_full_list_release_following (record_full_list
);
1973 /* The "record_is_replaying" target method. */
1976 record_full_base_target::record_is_replaying (ptid_t ptid
)
1978 return RECORD_FULL_IS_REPLAY
;
1981 /* The "record_will_replay" target method. */
1984 record_full_base_target::record_will_replay (ptid_t ptid
, int dir
)
1986 /* We can currently only record when executing forwards. Should we be able
1987 to record when executing backwards on targets that support reverse
1988 execution, this needs to be changed. */
1990 return RECORD_FULL_IS_REPLAY
|| dir
== EXEC_REVERSE
;
1993 /* Go to a specific entry. */
1996 record_full_goto_entry (struct record_full_entry
*p
)
1999 error (_("Target insn not found."));
2000 else if (p
== record_full_list
)
2001 error (_("Already at target insn."));
2002 else if (p
->u
.end
.insn_num
> record_full_list
->u
.end
.insn_num
)
2004 printf_filtered (_("Go forward to insn number %s\n"),
2005 pulongest (p
->u
.end
.insn_num
));
2006 record_full_goto_insn (p
, EXEC_FORWARD
);
2010 printf_filtered (_("Go backward to insn number %s\n"),
2011 pulongest (p
->u
.end
.insn_num
));
2012 record_full_goto_insn (p
, EXEC_REVERSE
);
2015 registers_changed ();
2016 reinit_frame_cache ();
2017 inferior_thread ()->suspend
.stop_pc
2018 = regcache_read_pc (get_current_regcache ());
2019 print_stack_frame (get_selected_frame (NULL
), 1, SRC_AND_LOC
, 1);
2022 /* The "goto_record_begin" target method. */
2025 record_full_base_target::goto_record_begin ()
2027 struct record_full_entry
*p
= NULL
;
2029 for (p
= &record_full_first
; p
!= NULL
; p
= p
->next
)
2030 if (p
->type
== record_full_end
)
2033 record_full_goto_entry (p
);
2036 /* The "goto_record_end" target method. */
2039 record_full_base_target::goto_record_end ()
2041 struct record_full_entry
*p
= NULL
;
2043 for (p
= record_full_list
; p
->next
!= NULL
; p
= p
->next
)
2045 for (; p
!= NULL
; p
= p
->prev
)
2046 if (p
->type
== record_full_end
)
2049 record_full_goto_entry (p
);
2052 /* The "goto_record" target method. */
2055 record_full_base_target::goto_record (ULONGEST target_insn
)
2057 struct record_full_entry
*p
= NULL
;
2059 for (p
= &record_full_first
; p
!= NULL
; p
= p
->next
)
2060 if (p
->type
== record_full_end
&& p
->u
.end
.insn_num
== target_insn
)
2063 record_full_goto_entry (p
);
2066 /* The "record_stop_replaying" target method. */
2069 record_full_base_target::record_stop_replaying ()
2074 /* "resume" method for prec over corefile. */
2077 record_full_core_target::resume (ptid_t ptid
, int step
,
2078 enum gdb_signal signal
)
2080 record_full_resume_step
= step
;
2081 record_full_resumed
= 1;
2082 record_full_execution_dir
= ::execution_direction
;
2084 /* We are about to start executing the inferior (or simulate it),
2085 let's register it with the event loop. */
2086 if (target_can_async_p ())
2090 /* "kill" method for prec over corefile. */
2093 record_full_core_target::kill ()
2096 fprintf_unfiltered (gdb_stdlog
, "Process record: record_full_core_kill\n");
2098 unpush_target (this);
2101 /* "fetch_registers" method for prec over corefile. */
2104 record_full_core_target::fetch_registers (struct regcache
*regcache
,
2109 int num
= gdbarch_num_regs (regcache
->arch ());
2112 for (i
= 0; i
< num
; i
++)
2113 regcache
->raw_supply (i
, *record_full_core_regbuf
);
2116 regcache
->raw_supply (regno
, *record_full_core_regbuf
);
2119 /* "prepare_to_store" method for prec over corefile. */
2122 record_full_core_target::prepare_to_store (struct regcache
*regcache
)
2126 /* "store_registers" method for prec over corefile. */
2129 record_full_core_target::store_registers (struct regcache
*regcache
,
2132 if (record_full_gdb_operation_disable
)
2133 record_full_core_regbuf
->raw_supply (regno
, *regcache
);
2135 error (_("You can't do that without a process to debug."));
2138 /* "xfer_partial" method for prec over corefile. */
2140 enum target_xfer_status
2141 record_full_core_target::xfer_partial (enum target_object object
,
2142 const char *annex
, gdb_byte
*readbuf
,
2143 const gdb_byte
*writebuf
, ULONGEST offset
,
2144 ULONGEST len
, ULONGEST
*xfered_len
)
2146 if (object
== TARGET_OBJECT_MEMORY
)
2148 if (record_full_gdb_operation_disable
|| !writebuf
)
2150 struct target_section
*p
;
2152 for (p
= record_full_core_start
; p
< record_full_core_end
; p
++)
2154 if (offset
>= p
->addr
)
2156 struct record_full_core_buf_entry
*entry
;
2157 ULONGEST sec_offset
;
2159 if (offset
>= p
->endaddr
)
2162 if (offset
+ len
> p
->endaddr
)
2163 len
= p
->endaddr
- offset
;
2165 sec_offset
= offset
- p
->addr
;
2167 /* Read readbuf or write writebuf p, offset, len. */
2169 if (p
->the_bfd_section
->flags
& SEC_CONSTRUCTOR
2170 || (p
->the_bfd_section
->flags
& SEC_HAS_CONTENTS
) == 0)
2173 memset (readbuf
, 0, len
);
2176 return TARGET_XFER_OK
;
2178 /* Get record_full_core_buf_entry. */
2179 for (entry
= record_full_core_buf_list
; entry
;
2180 entry
= entry
->prev
)
2187 /* Add a new entry. */
2188 entry
= XNEW (struct record_full_core_buf_entry
);
2190 if (!bfd_malloc_and_get_section
2191 (p
->the_bfd_section
->owner
,
2196 return TARGET_XFER_EOF
;
2198 entry
->prev
= record_full_core_buf_list
;
2199 record_full_core_buf_list
= entry
;
2202 memcpy (entry
->buf
+ sec_offset
, writebuf
,
2208 return this->beneath ()->xfer_partial (object
, annex
,
2213 memcpy (readbuf
, entry
->buf
+ sec_offset
,
2218 return TARGET_XFER_OK
;
2222 return TARGET_XFER_E_IO
;
2225 error (_("You can't do that without a process to debug."));
2228 return this->beneath ()->xfer_partial (object
, annex
,
2229 readbuf
, writebuf
, offset
, len
,
2233 /* "insert_breakpoint" method for prec over corefile. */
2236 record_full_core_target::insert_breakpoint (struct gdbarch
*gdbarch
,
2237 struct bp_target_info
*bp_tgt
)
2242 /* "remove_breakpoint" method for prec over corefile. */
2245 record_full_core_target::remove_breakpoint (struct gdbarch
*gdbarch
,
2246 struct bp_target_info
*bp_tgt
,
2247 enum remove_bp_reason reason
)
2252 /* "has_execution" method for prec over corefile. */
2255 record_full_core_target::has_execution (inferior
*inf
)
2260 /* Record log save-file format
2261 Version 1 (never released)
2264 4 bytes: magic number htonl(0x20090829).
2265 NOTE: be sure to change whenever this file format changes!
2269 1 byte: record type (record_full_end, see enum record_full_type).
2271 1 byte: record type (record_full_reg, see enum record_full_type).
2272 8 bytes: register id (network byte order).
2273 MAX_REGISTER_SIZE bytes: register value.
2275 1 byte: record type (record_full_mem, see enum record_full_type).
2276 8 bytes: memory length (network byte order).
2277 8 bytes: memory address (network byte order).
2278 n bytes: memory value (n == memory length).
2281 4 bytes: magic number netorder32(0x20091016).
2282 NOTE: be sure to change whenever this file format changes!
2286 1 byte: record type (record_full_end, see enum record_full_type).
2288 4 bytes: instruction count
2290 1 byte: record type (record_full_reg, see enum record_full_type).
2291 4 bytes: register id (network byte order).
2292 n bytes: register value (n == actual register size).
2293 (eg. 4 bytes for x86 general registers).
2295 1 byte: record type (record_full_mem, see enum record_full_type).
2296 4 bytes: memory length (network byte order).
2297 8 bytes: memory address (network byte order).
2298 n bytes: memory value (n == memory length).
2302 /* bfdcore_read -- read bytes from a core file section. */
2305 bfdcore_read (bfd
*obfd
, asection
*osec
, void *buf
, int len
, int *offset
)
2307 int ret
= bfd_get_section_contents (obfd
, osec
, buf
, *offset
, len
);
2312 error (_("Failed to read %d bytes from core file %s ('%s')."),
2313 len
, bfd_get_filename (obfd
),
2314 bfd_errmsg (bfd_get_error ()));
2317 static inline uint64_t
2318 netorder64 (uint64_t input
)
2322 store_unsigned_integer ((gdb_byte
*) &ret
, sizeof (ret
),
2323 BFD_ENDIAN_BIG
, input
);
2327 static inline uint32_t
2328 netorder32 (uint32_t input
)
2332 store_unsigned_integer ((gdb_byte
*) &ret
, sizeof (ret
),
2333 BFD_ENDIAN_BIG
, input
);
2337 /* Restore the execution log from a core_bfd file. */
2339 record_full_restore (void)
2342 struct record_full_entry
*rec
;
2346 struct regcache
*regcache
;
2348 /* We restore the execution log from the open core bfd,
2350 if (core_bfd
== NULL
)
2353 /* "record_full_restore" can only be called when record list is empty. */
2354 gdb_assert (record_full_first
.next
== NULL
);
2357 fprintf_unfiltered (gdb_stdlog
, "Restoring recording from core file.\n");
2359 /* Now need to find our special note section. */
2360 osec
= bfd_get_section_by_name (core_bfd
, "null0");
2362 fprintf_unfiltered (gdb_stdlog
, "Find precord section %s.\n",
2363 osec
? "succeeded" : "failed");
2366 osec_size
= bfd_section_size (osec
);
2368 fprintf_unfiltered (gdb_stdlog
, "%s", bfd_section_name (osec
));
2370 /* Check the magic code. */
2371 bfdcore_read (core_bfd
, osec
, &magic
, sizeof (magic
), &bfd_offset
);
2372 if (magic
!= RECORD_FULL_FILE_MAGIC
)
2373 error (_("Version mis-match or file format error in core file %s."),
2374 bfd_get_filename (core_bfd
));
2376 fprintf_unfiltered (gdb_stdlog
,
2377 " Reading 4-byte magic cookie "
2378 "RECORD_FULL_FILE_MAGIC (0x%s)\n",
2379 phex_nz (netorder32 (magic
), 4));
2381 /* Restore the entries in recfd into record_full_arch_list_head and
2382 record_full_arch_list_tail. */
2383 record_full_arch_list_head
= NULL
;
2384 record_full_arch_list_tail
= NULL
;
2385 record_full_insn_num
= 0;
2389 regcache
= get_current_regcache ();
2394 uint32_t regnum
, len
, signal
, count
;
2397 /* We are finished when offset reaches osec_size. */
2398 if (bfd_offset
>= osec_size
)
2400 bfdcore_read (core_bfd
, osec
, &rectype
, sizeof (rectype
), &bfd_offset
);
2404 case record_full_reg
: /* reg */
2405 /* Get register number to regnum. */
2406 bfdcore_read (core_bfd
, osec
, ®num
,
2407 sizeof (regnum
), &bfd_offset
);
2408 regnum
= netorder32 (regnum
);
2410 rec
= record_full_reg_alloc (regcache
, regnum
);
2413 bfdcore_read (core_bfd
, osec
, record_full_get_loc (rec
),
2414 rec
->u
.reg
.len
, &bfd_offset
);
2417 fprintf_unfiltered (gdb_stdlog
,
2418 " Reading register %d (1 "
2419 "plus %lu plus %d bytes)\n",
2421 (unsigned long) sizeof (regnum
),
2425 case record_full_mem
: /* mem */
2427 bfdcore_read (core_bfd
, osec
, &len
,
2428 sizeof (len
), &bfd_offset
);
2429 len
= netorder32 (len
);
2432 bfdcore_read (core_bfd
, osec
, &addr
,
2433 sizeof (addr
), &bfd_offset
);
2434 addr
= netorder64 (addr
);
2436 rec
= record_full_mem_alloc (addr
, len
);
2439 bfdcore_read (core_bfd
, osec
, record_full_get_loc (rec
),
2440 rec
->u
.mem
.len
, &bfd_offset
);
2443 fprintf_unfiltered (gdb_stdlog
,
2444 " Reading memory %s (1 plus "
2445 "%lu plus %lu plus %d bytes)\n",
2446 paddress (get_current_arch (),
2448 (unsigned long) sizeof (addr
),
2449 (unsigned long) sizeof (len
),
2453 case record_full_end
: /* end */
2454 rec
= record_full_end_alloc ();
2455 record_full_insn_num
++;
2457 /* Get signal value. */
2458 bfdcore_read (core_bfd
, osec
, &signal
,
2459 sizeof (signal
), &bfd_offset
);
2460 signal
= netorder32 (signal
);
2461 rec
->u
.end
.sigval
= (enum gdb_signal
) signal
;
2463 /* Get insn count. */
2464 bfdcore_read (core_bfd
, osec
, &count
,
2465 sizeof (count
), &bfd_offset
);
2466 count
= netorder32 (count
);
2467 rec
->u
.end
.insn_num
= count
;
2468 record_full_insn_count
= count
+ 1;
2470 fprintf_unfiltered (gdb_stdlog
,
2471 " Reading record_full_end (1 + "
2472 "%lu + %lu bytes), offset == %s\n",
2473 (unsigned long) sizeof (signal
),
2474 (unsigned long) sizeof (count
),
2475 paddress (get_current_arch (),
2480 error (_("Bad entry type in core file %s."),
2481 bfd_get_filename (core_bfd
));
2485 /* Add rec to record arch list. */
2486 record_full_arch_list_add (rec
);
2489 catch (const gdb_exception
&ex
)
2491 record_full_list_release (record_full_arch_list_tail
);
2495 /* Add record_full_arch_list_head to the end of record list. */
2496 record_full_first
.next
= record_full_arch_list_head
;
2497 record_full_arch_list_head
->prev
= &record_full_first
;
2498 record_full_arch_list_tail
->next
= NULL
;
2499 record_full_list
= &record_full_first
;
2501 /* Update record_full_insn_max_num. */
2502 if (record_full_insn_num
> record_full_insn_max_num
)
2504 record_full_insn_max_num
= record_full_insn_num
;
2505 warning (_("Auto increase record/replay buffer limit to %u."),
2506 record_full_insn_max_num
);
2510 printf_filtered (_("Restored records from core file %s.\n"),
2511 bfd_get_filename (core_bfd
));
2513 print_stack_frame (get_selected_frame (NULL
), 1, SRC_AND_LOC
, 1);
2516 /* bfdcore_write -- write bytes into a core file section. */
2519 bfdcore_write (bfd
*obfd
, asection
*osec
, void *buf
, int len
, int *offset
)
2521 int ret
= bfd_set_section_contents (obfd
, osec
, buf
, *offset
, len
);
2526 error (_("Failed to write %d bytes to core file %s ('%s')."),
2527 len
, bfd_get_filename (obfd
),
2528 bfd_errmsg (bfd_get_error ()));
2531 /* Restore the execution log from a file. We use a modified elf
2532 corefile format, with an extra section for our data. */
2535 cmd_record_full_restore (const char *args
, int from_tty
)
2537 core_file_command (args
, from_tty
);
2538 record_full_open (args
, from_tty
);
2541 /* Save the execution log to a file. We use a modified elf corefile
2542 format, with an extra section for our data. */
2545 record_full_base_target::save_record (const char *recfilename
)
2547 struct record_full_entry
*cur_record_full_list
;
2549 struct regcache
*regcache
;
2550 struct gdbarch
*gdbarch
;
2552 asection
*osec
= NULL
;
2555 /* Open the save file. */
2557 fprintf_unfiltered (gdb_stdlog
, "Saving execution log to core file '%s'\n",
2560 /* Open the output file. */
2561 gdb_bfd_ref_ptr
obfd (create_gcore_bfd (recfilename
));
2563 /* Arrange to remove the output file on failure. */
2564 gdb::unlinker
unlink_file (recfilename
);
2566 /* Save the current record entry to "cur_record_full_list". */
2567 cur_record_full_list
= record_full_list
;
2569 /* Get the values of regcache and gdbarch. */
2570 regcache
= get_current_regcache ();
2571 gdbarch
= regcache
->arch ();
2573 /* Disable the GDB operation record. */
2574 scoped_restore restore_operation_disable
2575 = record_full_gdb_operation_disable_set ();
2577 /* Reverse execute to the begin of record list. */
2580 /* Check for beginning and end of log. */
2581 if (record_full_list
== &record_full_first
)
2584 record_full_exec_insn (regcache
, gdbarch
, record_full_list
);
2586 if (record_full_list
->prev
)
2587 record_full_list
= record_full_list
->prev
;
2590 /* Compute the size needed for the extra bfd section. */
2591 save_size
= 4; /* magic cookie */
2592 for (record_full_list
= record_full_first
.next
; record_full_list
;
2593 record_full_list
= record_full_list
->next
)
2594 switch (record_full_list
->type
)
2596 case record_full_end
:
2597 save_size
+= 1 + 4 + 4;
2599 case record_full_reg
:
2600 save_size
+= 1 + 4 + record_full_list
->u
.reg
.len
;
2602 case record_full_mem
:
2603 save_size
+= 1 + 4 + 8 + record_full_list
->u
.mem
.len
;
2607 /* Make the new bfd section. */
2608 osec
= bfd_make_section_anyway_with_flags (obfd
.get (), "precord",
2612 error (_("Failed to create 'precord' section for corefile %s: %s"),
2614 bfd_errmsg (bfd_get_error ()));
2615 bfd_set_section_size (osec
, save_size
);
2616 bfd_set_section_vma (osec
, 0);
2617 bfd_set_section_alignment (osec
, 0);
2619 /* Save corefile state. */
2620 write_gcore_file (obfd
.get ());
2622 /* Write out the record log. */
2623 /* Write the magic code. */
2624 magic
= RECORD_FULL_FILE_MAGIC
;
2626 fprintf_unfiltered (gdb_stdlog
,
2627 " Writing 4-byte magic cookie "
2628 "RECORD_FULL_FILE_MAGIC (0x%s)\n",
2629 phex_nz (magic
, 4));
2630 bfdcore_write (obfd
.get (), osec
, &magic
, sizeof (magic
), &bfd_offset
);
2632 /* Save the entries to recfd and forward execute to the end of
2634 record_full_list
= &record_full_first
;
2638 if (record_full_list
!= &record_full_first
)
2641 uint32_t regnum
, len
, signal
, count
;
2644 type
= record_full_list
->type
;
2645 bfdcore_write (obfd
.get (), osec
, &type
, sizeof (type
), &bfd_offset
);
2647 switch (record_full_list
->type
)
2649 case record_full_reg
: /* reg */
2651 fprintf_unfiltered (gdb_stdlog
,
2652 " Writing register %d (1 "
2653 "plus %lu plus %d bytes)\n",
2654 record_full_list
->u
.reg
.num
,
2655 (unsigned long) sizeof (regnum
),
2656 record_full_list
->u
.reg
.len
);
2659 regnum
= netorder32 (record_full_list
->u
.reg
.num
);
2660 bfdcore_write (obfd
.get (), osec
, ®num
,
2661 sizeof (regnum
), &bfd_offset
);
2664 bfdcore_write (obfd
.get (), osec
,
2665 record_full_get_loc (record_full_list
),
2666 record_full_list
->u
.reg
.len
, &bfd_offset
);
2669 case record_full_mem
: /* mem */
2671 fprintf_unfiltered (gdb_stdlog
,
2672 " Writing memory %s (1 plus "
2673 "%lu plus %lu plus %d bytes)\n",
2675 record_full_list
->u
.mem
.addr
),
2676 (unsigned long) sizeof (addr
),
2677 (unsigned long) sizeof (len
),
2678 record_full_list
->u
.mem
.len
);
2681 len
= netorder32 (record_full_list
->u
.mem
.len
);
2682 bfdcore_write (obfd
.get (), osec
, &len
, sizeof (len
),
2685 /* Write memaddr. */
2686 addr
= netorder64 (record_full_list
->u
.mem
.addr
);
2687 bfdcore_write (obfd
.get (), osec
, &addr
,
2688 sizeof (addr
), &bfd_offset
);
2691 bfdcore_write (obfd
.get (), osec
,
2692 record_full_get_loc (record_full_list
),
2693 record_full_list
->u
.mem
.len
, &bfd_offset
);
2696 case record_full_end
:
2698 fprintf_unfiltered (gdb_stdlog
,
2699 " Writing record_full_end (1 + "
2700 "%lu + %lu bytes)\n",
2701 (unsigned long) sizeof (signal
),
2702 (unsigned long) sizeof (count
));
2703 /* Write signal value. */
2704 signal
= netorder32 (record_full_list
->u
.end
.sigval
);
2705 bfdcore_write (obfd
.get (), osec
, &signal
,
2706 sizeof (signal
), &bfd_offset
);
2708 /* Write insn count. */
2709 count
= netorder32 (record_full_list
->u
.end
.insn_num
);
2710 bfdcore_write (obfd
.get (), osec
, &count
,
2711 sizeof (count
), &bfd_offset
);
2716 /* Execute entry. */
2717 record_full_exec_insn (regcache
, gdbarch
, record_full_list
);
2719 if (record_full_list
->next
)
2720 record_full_list
= record_full_list
->next
;
2725 /* Reverse execute to cur_record_full_list. */
2728 /* Check for beginning and end of log. */
2729 if (record_full_list
== cur_record_full_list
)
2732 record_full_exec_insn (regcache
, gdbarch
, record_full_list
);
2734 if (record_full_list
->prev
)
2735 record_full_list
= record_full_list
->prev
;
2738 unlink_file
.keep ();
2741 printf_filtered (_("Saved core file %s with execution log.\n"),
2745 /* record_full_goto_insn -- rewind the record log (forward or backward,
2746 depending on DIR) to the given entry, changing the program state
2750 record_full_goto_insn (struct record_full_entry
*entry
,
2751 enum exec_direction_kind dir
)
2753 scoped_restore restore_operation_disable
2754 = record_full_gdb_operation_disable_set ();
2755 struct regcache
*regcache
= get_current_regcache ();
2756 struct gdbarch
*gdbarch
= regcache
->arch ();
2758 /* Assume everything is valid: we will hit the entry,
2759 and we will not hit the end of the recording. */
2761 if (dir
== EXEC_FORWARD
)
2762 record_full_list
= record_full_list
->next
;
2766 record_full_exec_insn (regcache
, gdbarch
, record_full_list
);
2767 if (dir
== EXEC_REVERSE
)
2768 record_full_list
= record_full_list
->prev
;
2770 record_full_list
= record_full_list
->next
;
2771 } while (record_full_list
!= entry
);
2774 /* Alias for "target record-full". */
2777 cmd_record_full_start (const char *args
, int from_tty
)
2779 execute_command ("target record-full", from_tty
);
2783 set_record_full_insn_max_num (const char *args
, int from_tty
,
2784 struct cmd_list_element
*c
)
2786 if (record_full_insn_num
> record_full_insn_max_num
)
2788 /* Count down record_full_insn_num while releasing records from list. */
2789 while (record_full_insn_num
> record_full_insn_max_num
)
2791 record_full_list_release_first ();
2792 record_full_insn_num
--;
2797 void _initialize_record_full ();
2799 _initialize_record_full ()
2801 struct cmd_list_element
*c
;
2803 /* Init record_full_first. */
2804 record_full_first
.prev
= NULL
;
2805 record_full_first
.next
= NULL
;
2806 record_full_first
.type
= record_full_end
;
2808 add_target (record_full_target_info
, record_full_open
);
2809 add_deprecated_target_alias (record_full_target_info
, "record");
2810 add_target (record_full_core_target_info
, record_full_open
);
2812 add_prefix_cmd ("full", class_obscure
, cmd_record_full_start
,
2813 _("Start full execution recording."), &record_full_cmdlist
,
2814 "record full ", 0, &record_cmdlist
);
2816 c
= add_cmd ("restore", class_obscure
, cmd_record_full_restore
,
2817 _("Restore the execution log from a file.\n\
2818 Argument is filename. File must be created with 'record save'."),
2819 &record_full_cmdlist
);
2820 set_cmd_completer (c
, filename_completer
);
2822 /* Deprecate the old version without "full" prefix. */
2823 c
= add_alias_cmd ("restore", "full restore", class_obscure
, 1,
2825 set_cmd_completer (c
, filename_completer
);
2826 deprecate_cmd (c
, "record full restore");
2828 add_basic_prefix_cmd ("full", class_support
,
2829 _("Set record options."), &set_record_full_cmdlist
,
2830 "set record full ", 0, &set_record_cmdlist
);
2832 add_show_prefix_cmd ("full", class_support
,
2833 _("Show record options."), &show_record_full_cmdlist
,
2834 "show record full ", 0, &show_record_cmdlist
);
2836 /* Record instructions number limit command. */
2837 add_setshow_boolean_cmd ("stop-at-limit", no_class
,
2838 &record_full_stop_at_limit
, _("\
2839 Set whether record/replay stops when record/replay buffer becomes full."), _("\
2840 Show whether record/replay stops when record/replay buffer becomes full."),
2841 _("Default is ON.\n\
2842 When ON, if the record/replay buffer becomes full, ask user what to do.\n\
2843 When OFF, if the record/replay buffer becomes full,\n\
2844 delete the oldest recorded instruction to make room for each new one."),
2846 &set_record_full_cmdlist
, &show_record_full_cmdlist
);
2848 c
= add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class
, 1,
2849 &set_record_cmdlist
);
2850 deprecate_cmd (c
, "set record full stop-at-limit");
2852 c
= add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class
, 1,
2853 &show_record_cmdlist
);
2854 deprecate_cmd (c
, "show record full stop-at-limit");
2856 add_setshow_uinteger_cmd ("insn-number-max", no_class
,
2857 &record_full_insn_max_num
,
2858 _("Set record/replay buffer limit."),
2859 _("Show record/replay buffer limit."), _("\
2860 Set the maximum number of instructions to be stored in the\n\
2861 record/replay buffer. A value of either \"unlimited\" or zero means no\n\
2862 limit. Default is 200000."),
2863 set_record_full_insn_max_num
,
2864 NULL
, &set_record_full_cmdlist
,
2865 &show_record_full_cmdlist
);
2867 c
= add_alias_cmd ("insn-number-max", "full insn-number-max", no_class
, 1,
2868 &set_record_cmdlist
);
2869 deprecate_cmd (c
, "set record full insn-number-max");
2871 c
= add_alias_cmd ("insn-number-max", "full insn-number-max", no_class
, 1,
2872 &show_record_cmdlist
);
2873 deprecate_cmd (c
, "show record full insn-number-max");
2875 add_setshow_boolean_cmd ("memory-query", no_class
,
2876 &record_full_memory_query
, _("\
2877 Set whether query if PREC cannot record memory change of next instruction."),
2879 Show whether query if PREC cannot record memory change of next instruction."),
2882 When ON, query if PREC cannot record memory change of next instruction."),
2884 &set_record_full_cmdlist
,
2885 &show_record_full_cmdlist
);
2887 c
= add_alias_cmd ("memory-query", "full memory-query", no_class
, 1,
2888 &set_record_cmdlist
);
2889 deprecate_cmd (c
, "set record full memory-query");
2891 c
= add_alias_cmd ("memory-query", "full memory-query", no_class
, 1,
2892 &show_record_cmdlist
);
2893 deprecate_cmd (c
, "show record full memory-query");