daily update
[binutils.git] / gas / expr.c
blob3ae1bcc58191a827032b8a4a712d0b62de22ca0f
1 /* expr.c -operands, expressions-
2 Copyright 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
3 1999, 2000, 2001, 2002, 2003, 2004, 2005
4 Free Software Foundation, Inc.
6 This file is part of GAS, the GNU Assembler.
8 GAS is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2, or (at your option)
11 any later version.
13 GAS is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with GAS; see the file COPYING. If not, write to the Free
20 Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
21 02110-1301, USA. */
23 /* This is really a branch office of as-read.c. I split it out to clearly
24 distinguish the world of expressions from the world of statements.
25 (It also gives smaller files to re-compile.)
26 Here, "operand"s are of expressions, not instructions. */
28 #include <string.h>
29 #define min(a, b) ((a) < (b) ? (a) : (b))
31 #include "as.h"
32 #include "safe-ctype.h"
33 #include "obstack.h"
35 static void floating_constant (expressionS * expressionP);
36 static valueT generic_bignum_to_int32 (void);
37 #ifdef BFD64
38 static valueT generic_bignum_to_int64 (void);
39 #endif
40 static void integer_constant (int radix, expressionS * expressionP);
41 static void mri_char_constant (expressionS *);
42 static void current_location (expressionS *);
43 static void clean_up_expression (expressionS * expressionP);
44 static segT operand (expressionS *, enum expr_mode);
45 static operatorT operator (int *);
47 extern const char EXP_CHARS[], FLT_CHARS[];
49 /* We keep a mapping of expression symbols to file positions, so that
50 we can provide better error messages. */
52 struct expr_symbol_line {
53 struct expr_symbol_line *next;
54 symbolS *sym;
55 char *file;
56 unsigned int line;
59 static struct expr_symbol_line *expr_symbol_lines;
61 /* Build a dummy symbol to hold a complex expression. This is how we
62 build expressions up out of other expressions. The symbol is put
63 into the fake section expr_section. */
65 symbolS *
66 make_expr_symbol (expressionS *expressionP)
68 expressionS zero;
69 symbolS *symbolP;
70 struct expr_symbol_line *n;
72 if (expressionP->X_op == O_symbol
73 && expressionP->X_add_number == 0)
74 return expressionP->X_add_symbol;
76 if (expressionP->X_op == O_big)
78 /* This won't work, because the actual value is stored in
79 generic_floating_point_number or generic_bignum, and we are
80 going to lose it if we haven't already. */
81 if (expressionP->X_add_number > 0)
82 as_bad (_("bignum invalid"));
83 else
84 as_bad (_("floating point number invalid"));
85 zero.X_op = O_constant;
86 zero.X_add_number = 0;
87 zero.X_unsigned = 0;
88 clean_up_expression (&zero);
89 expressionP = &zero;
92 /* Putting constant symbols in absolute_section rather than
93 expr_section is convenient for the old a.out code, for which
94 S_GET_SEGMENT does not always retrieve the value put in by
95 S_SET_SEGMENT. */
96 symbolP = symbol_create (FAKE_LABEL_NAME,
97 (expressionP->X_op == O_constant
98 ? absolute_section
99 : expr_section),
100 0, &zero_address_frag);
101 symbol_set_value_expression (symbolP, expressionP);
103 if (expressionP->X_op == O_constant)
104 resolve_symbol_value (symbolP);
106 n = (struct expr_symbol_line *) xmalloc (sizeof *n);
107 n->sym = symbolP;
108 as_where (&n->file, &n->line);
109 n->next = expr_symbol_lines;
110 expr_symbol_lines = n;
112 return symbolP;
115 /* Return the file and line number for an expr symbol. Return
116 non-zero if something was found, 0 if no information is known for
117 the symbol. */
120 expr_symbol_where (symbolS *sym, char **pfile, unsigned int *pline)
122 register struct expr_symbol_line *l;
124 for (l = expr_symbol_lines; l != NULL; l = l->next)
126 if (l->sym == sym)
128 *pfile = l->file;
129 *pline = l->line;
130 return 1;
134 return 0;
137 /* Utilities for building expressions.
138 Since complex expressions are recorded as symbols for use in other
139 expressions these return a symbolS * and not an expressionS *.
140 These explicitly do not take an "add_number" argument. */
141 /* ??? For completeness' sake one might want expr_build_symbol.
142 It would just return its argument. */
144 /* Build an expression for an unsigned constant.
145 The corresponding one for signed constants is missing because
146 there's currently no need for it. One could add an unsigned_p flag
147 but that seems more clumsy. */
149 symbolS *
150 expr_build_uconstant (offsetT value)
152 expressionS e;
154 e.X_op = O_constant;
155 e.X_add_number = value;
156 e.X_unsigned = 1;
157 return make_expr_symbol (&e);
160 /* Build an expression for the current location ('.'). */
162 symbolS *
163 expr_build_dot (void)
165 expressionS e;
167 current_location (&e);
168 return make_expr_symbol (&e);
171 /* Build any floating-point literal here.
172 Also build any bignum literal here. */
174 /* Seems atof_machine can backscan through generic_bignum and hit whatever
175 happens to be loaded before it in memory. And its way too complicated
176 for me to fix right. Thus a hack. JF: Just make generic_bignum bigger,
177 and never write into the early words, thus they'll always be zero.
178 I hate Dean's floating-point code. Bleh. */
179 LITTLENUM_TYPE generic_bignum[SIZE_OF_LARGE_NUMBER + 6];
181 FLONUM_TYPE generic_floating_point_number = {
182 &generic_bignum[6], /* low. (JF: Was 0) */
183 &generic_bignum[SIZE_OF_LARGE_NUMBER + 6 - 1], /* high. JF: (added +6) */
184 0, /* leader. */
185 0, /* exponent. */
186 0 /* sign. */
190 static void
191 floating_constant (expressionS *expressionP)
193 /* input_line_pointer -> floating-point constant. */
194 int error_code;
196 error_code = atof_generic (&input_line_pointer, ".", EXP_CHARS,
197 &generic_floating_point_number);
199 if (error_code)
201 if (error_code == ERROR_EXPONENT_OVERFLOW)
203 as_bad (_("bad floating-point constant: exponent overflow"));
205 else
207 as_bad (_("bad floating-point constant: unknown error code=%d"),
208 error_code);
211 expressionP->X_op = O_big;
212 /* input_line_pointer -> just after constant, which may point to
213 whitespace. */
214 expressionP->X_add_number = -1;
217 static valueT
218 generic_bignum_to_int32 (void)
220 valueT number =
221 ((generic_bignum[1] & LITTLENUM_MASK) << LITTLENUM_NUMBER_OF_BITS)
222 | (generic_bignum[0] & LITTLENUM_MASK);
223 number &= 0xffffffff;
224 return number;
227 #ifdef BFD64
228 static valueT
229 generic_bignum_to_int64 (void)
231 valueT number =
232 ((((((((valueT) generic_bignum[3] & LITTLENUM_MASK)
233 << LITTLENUM_NUMBER_OF_BITS)
234 | ((valueT) generic_bignum[2] & LITTLENUM_MASK))
235 << LITTLENUM_NUMBER_OF_BITS)
236 | ((valueT) generic_bignum[1] & LITTLENUM_MASK))
237 << LITTLENUM_NUMBER_OF_BITS)
238 | ((valueT) generic_bignum[0] & LITTLENUM_MASK));
239 return number;
241 #endif
243 static void
244 integer_constant (int radix, expressionS *expressionP)
246 char *start; /* Start of number. */
247 char *suffix = NULL;
248 char c;
249 valueT number; /* Offset or (absolute) value. */
250 short int digit; /* Value of next digit in current radix. */
251 short int maxdig = 0; /* Highest permitted digit value. */
252 int too_many_digits = 0; /* If we see >= this number of. */
253 char *name; /* Points to name of symbol. */
254 symbolS *symbolP; /* Points to symbol. */
256 int small; /* True if fits in 32 bits. */
258 /* May be bignum, or may fit in 32 bits. */
259 /* Most numbers fit into 32 bits, and we want this case to be fast.
260 so we pretend it will fit into 32 bits. If, after making up a 32
261 bit number, we realise that we have scanned more digits than
262 comfortably fit into 32 bits, we re-scan the digits coding them
263 into a bignum. For decimal and octal numbers we are
264 conservative: Some numbers may be assumed bignums when in fact
265 they do fit into 32 bits. Numbers of any radix can have excess
266 leading zeros: We strive to recognise this and cast them back
267 into 32 bits. We must check that the bignum really is more than
268 32 bits, and change it back to a 32-bit number if it fits. The
269 number we are looking for is expected to be positive, but if it
270 fits into 32 bits as an unsigned number, we let it be a 32-bit
271 number. The cavalier approach is for speed in ordinary cases. */
272 /* This has been extended for 64 bits. We blindly assume that if
273 you're compiling in 64-bit mode, the target is a 64-bit machine.
274 This should be cleaned up. */
276 #ifdef BFD64
277 #define valuesize 64
278 #else /* includes non-bfd case, mostly */
279 #define valuesize 32
280 #endif
282 if ((NUMBERS_WITH_SUFFIX || flag_m68k_mri) && radix == 0)
284 int flt = 0;
286 /* In MRI mode, the number may have a suffix indicating the
287 radix. For that matter, it might actually be a floating
288 point constant. */
289 for (suffix = input_line_pointer; ISALNUM (*suffix); suffix++)
291 if (*suffix == 'e' || *suffix == 'E')
292 flt = 1;
295 if (suffix == input_line_pointer)
297 radix = 10;
298 suffix = NULL;
300 else
302 c = *--suffix;
303 c = TOUPPER (c);
304 /* If we have both NUMBERS_WITH_SUFFIX and LOCAL_LABELS_FB,
305 we distinguish between 'B' and 'b'. This is the case for
306 Z80. */
307 if ((NUMBERS_WITH_SUFFIX && LOCAL_LABELS_FB ? *suffix : c) == 'B')
308 radix = 2;
309 else if (c == 'D')
310 radix = 10;
311 else if (c == 'O' || c == 'Q')
312 radix = 8;
313 else if (c == 'H')
314 radix = 16;
315 else if (suffix[1] == '.' || c == 'E' || flt)
317 floating_constant (expressionP);
318 return;
320 else
322 radix = 10;
323 suffix = NULL;
328 switch (radix)
330 case 2:
331 maxdig = 2;
332 too_many_digits = valuesize + 1;
333 break;
334 case 8:
335 maxdig = radix = 8;
336 too_many_digits = (valuesize + 2) / 3 + 1;
337 break;
338 case 16:
339 maxdig = radix = 16;
340 too_many_digits = (valuesize + 3) / 4 + 1;
341 break;
342 case 10:
343 maxdig = radix = 10;
344 too_many_digits = (valuesize + 11) / 4; /* Very rough. */
346 #undef valuesize
347 start = input_line_pointer;
348 c = *input_line_pointer++;
349 for (number = 0;
350 (digit = hex_value (c)) < maxdig;
351 c = *input_line_pointer++)
353 number = number * radix + digit;
355 /* c contains character after number. */
356 /* input_line_pointer->char after c. */
357 small = (input_line_pointer - start - 1) < too_many_digits;
359 if (radix == 16 && c == '_')
361 /* This is literal of the form 0x333_0_12345678_1.
362 This example is equivalent to 0x00000333000000001234567800000001. */
364 int num_little_digits = 0;
365 int i;
366 input_line_pointer = start; /* -> 1st digit. */
368 know (LITTLENUM_NUMBER_OF_BITS == 16);
370 for (c = '_'; c == '_'; num_little_digits += 2)
373 /* Convert one 64-bit word. */
374 int ndigit = 0;
375 number = 0;
376 for (c = *input_line_pointer++;
377 (digit = hex_value (c)) < maxdig;
378 c = *(input_line_pointer++))
380 number = number * radix + digit;
381 ndigit++;
384 /* Check for 8 digit per word max. */
385 if (ndigit > 8)
386 as_bad (_("a bignum with underscores may not have more than 8 hex digits in any word"));
388 /* Add this chunk to the bignum.
389 Shift things down 2 little digits. */
390 know (LITTLENUM_NUMBER_OF_BITS == 16);
391 for (i = min (num_little_digits + 1, SIZE_OF_LARGE_NUMBER - 1);
392 i >= 2;
393 i--)
394 generic_bignum[i] = generic_bignum[i - 2];
396 /* Add the new digits as the least significant new ones. */
397 generic_bignum[0] = number & 0xffffffff;
398 generic_bignum[1] = number >> 16;
401 /* Again, c is char after number, input_line_pointer->after c. */
403 if (num_little_digits > SIZE_OF_LARGE_NUMBER - 1)
404 num_little_digits = SIZE_OF_LARGE_NUMBER - 1;
406 assert (num_little_digits >= 4);
408 if (num_little_digits != 8)
409 as_bad (_("a bignum with underscores must have exactly 4 words"));
411 /* We might have some leading zeros. These can be trimmed to give
412 us a change to fit this constant into a small number. */
413 while (generic_bignum[num_little_digits - 1] == 0
414 && num_little_digits > 1)
415 num_little_digits--;
417 if (num_little_digits <= 2)
419 /* will fit into 32 bits. */
420 number = generic_bignum_to_int32 ();
421 small = 1;
423 #ifdef BFD64
424 else if (num_little_digits <= 4)
426 /* Will fit into 64 bits. */
427 number = generic_bignum_to_int64 ();
428 small = 1;
430 #endif
431 else
433 small = 0;
435 /* Number of littlenums in the bignum. */
436 number = num_little_digits;
439 else if (!small)
441 /* We saw a lot of digits. manufacture a bignum the hard way. */
442 LITTLENUM_TYPE *leader; /* -> high order littlenum of the bignum. */
443 LITTLENUM_TYPE *pointer; /* -> littlenum we are frobbing now. */
444 long carry;
446 leader = generic_bignum;
447 generic_bignum[0] = 0;
448 generic_bignum[1] = 0;
449 generic_bignum[2] = 0;
450 generic_bignum[3] = 0;
451 input_line_pointer = start; /* -> 1st digit. */
452 c = *input_line_pointer++;
453 for (; (carry = hex_value (c)) < maxdig; c = *input_line_pointer++)
455 for (pointer = generic_bignum; pointer <= leader; pointer++)
457 long work;
459 work = carry + radix * *pointer;
460 *pointer = work & LITTLENUM_MASK;
461 carry = work >> LITTLENUM_NUMBER_OF_BITS;
463 if (carry)
465 if (leader < generic_bignum + SIZE_OF_LARGE_NUMBER - 1)
467 /* Room to grow a longer bignum. */
468 *++leader = carry;
472 /* Again, c is char after number. */
473 /* input_line_pointer -> after c. */
474 know (LITTLENUM_NUMBER_OF_BITS == 16);
475 if (leader < generic_bignum + 2)
477 /* Will fit into 32 bits. */
478 number = generic_bignum_to_int32 ();
479 small = 1;
481 #ifdef BFD64
482 else if (leader < generic_bignum + 4)
484 /* Will fit into 64 bits. */
485 number = generic_bignum_to_int64 ();
486 small = 1;
488 #endif
489 else
491 /* Number of littlenums in the bignum. */
492 number = leader - generic_bignum + 1;
496 if ((NUMBERS_WITH_SUFFIX || flag_m68k_mri)
497 && suffix != NULL
498 && input_line_pointer - 1 == suffix)
499 c = *input_line_pointer++;
501 if (small)
503 /* Here with number, in correct radix. c is the next char.
504 Note that unlike un*x, we allow "011f" "0x9f" to both mean
505 the same as the (conventional) "9f".
506 This is simply easier than checking for strict canonical
507 form. Syntax sux! */
509 if (LOCAL_LABELS_FB && c == 'b')
511 /* Backward ref to local label.
512 Because it is backward, expect it to be defined. */
513 /* Construct a local label. */
514 name = fb_label_name ((int) number, 0);
516 /* Seen before, or symbol is defined: OK. */
517 symbolP = symbol_find (name);
518 if ((symbolP != NULL) && (S_IS_DEFINED (symbolP)))
520 /* Local labels are never absolute. Don't waste time
521 checking absoluteness. */
522 know (SEG_NORMAL (S_GET_SEGMENT (symbolP)));
524 expressionP->X_op = O_symbol;
525 expressionP->X_add_symbol = symbolP;
527 else
529 /* Either not seen or not defined. */
530 /* @@ Should print out the original string instead of
531 the parsed number. */
532 as_bad (_("backward ref to unknown label \"%d:\""),
533 (int) number);
534 expressionP->X_op = O_constant;
537 expressionP->X_add_number = 0;
538 } /* case 'b' */
539 else if (LOCAL_LABELS_FB && c == 'f')
541 /* Forward reference. Expect symbol to be undefined or
542 unknown. undefined: seen it before. unknown: never seen
543 it before.
545 Construct a local label name, then an undefined symbol.
546 Don't create a xseg frag for it: caller may do that.
547 Just return it as never seen before. */
548 name = fb_label_name ((int) number, 1);
549 symbolP = symbol_find_or_make (name);
550 /* We have no need to check symbol properties. */
551 #ifndef many_segments
552 /* Since "know" puts its arg into a "string", we
553 can't have newlines in the argument. */
554 know (S_GET_SEGMENT (symbolP) == undefined_section || S_GET_SEGMENT (symbolP) == text_section || S_GET_SEGMENT (symbolP) == data_section);
555 #endif
556 expressionP->X_op = O_symbol;
557 expressionP->X_add_symbol = symbolP;
558 expressionP->X_add_number = 0;
559 } /* case 'f' */
560 else if (LOCAL_LABELS_DOLLAR && c == '$')
562 /* If the dollar label is *currently* defined, then this is just
563 another reference to it. If it is not *currently* defined,
564 then this is a fresh instantiation of that number, so create
565 it. */
567 if (dollar_label_defined ((long) number))
569 name = dollar_label_name ((long) number, 0);
570 symbolP = symbol_find (name);
571 know (symbolP != NULL);
573 else
575 name = dollar_label_name ((long) number, 1);
576 symbolP = symbol_find_or_make (name);
579 expressionP->X_op = O_symbol;
580 expressionP->X_add_symbol = symbolP;
581 expressionP->X_add_number = 0;
582 } /* case '$' */
583 else
585 expressionP->X_op = O_constant;
586 expressionP->X_add_number = number;
587 input_line_pointer--; /* Restore following character. */
588 } /* Really just a number. */
590 else
592 /* Not a small number. */
593 expressionP->X_op = O_big;
594 expressionP->X_add_number = number; /* Number of littlenums. */
595 input_line_pointer--; /* -> char following number. */
599 /* Parse an MRI multi character constant. */
601 static void
602 mri_char_constant (expressionS *expressionP)
604 int i;
606 if (*input_line_pointer == '\''
607 && input_line_pointer[1] != '\'')
609 expressionP->X_op = O_constant;
610 expressionP->X_add_number = 0;
611 return;
614 /* In order to get the correct byte ordering, we must build the
615 number in reverse. */
616 for (i = SIZE_OF_LARGE_NUMBER - 1; i >= 0; i--)
618 int j;
620 generic_bignum[i] = 0;
621 for (j = 0; j < CHARS_PER_LITTLENUM; j++)
623 if (*input_line_pointer == '\'')
625 if (input_line_pointer[1] != '\'')
626 break;
627 ++input_line_pointer;
629 generic_bignum[i] <<= 8;
630 generic_bignum[i] += *input_line_pointer;
631 ++input_line_pointer;
634 if (i < SIZE_OF_LARGE_NUMBER - 1)
636 /* If there is more than one littlenum, left justify the
637 last one to make it match the earlier ones. If there is
638 only one, we can just use the value directly. */
639 for (; j < CHARS_PER_LITTLENUM; j++)
640 generic_bignum[i] <<= 8;
643 if (*input_line_pointer == '\''
644 && input_line_pointer[1] != '\'')
645 break;
648 if (i < 0)
650 as_bad (_("character constant too large"));
651 i = 0;
654 if (i > 0)
656 int c;
657 int j;
659 c = SIZE_OF_LARGE_NUMBER - i;
660 for (j = 0; j < c; j++)
661 generic_bignum[j] = generic_bignum[i + j];
662 i = c;
665 know (LITTLENUM_NUMBER_OF_BITS == 16);
666 if (i > 2)
668 expressionP->X_op = O_big;
669 expressionP->X_add_number = i;
671 else
673 expressionP->X_op = O_constant;
674 if (i < 2)
675 expressionP->X_add_number = generic_bignum[0] & LITTLENUM_MASK;
676 else
677 expressionP->X_add_number =
678 (((generic_bignum[1] & LITTLENUM_MASK)
679 << LITTLENUM_NUMBER_OF_BITS)
680 | (generic_bignum[0] & LITTLENUM_MASK));
683 /* Skip the final closing quote. */
684 ++input_line_pointer;
687 /* Return an expression representing the current location. This
688 handles the magic symbol `.'. */
690 static void
691 current_location (expressionS *expressionp)
693 if (now_seg == absolute_section)
695 expressionp->X_op = O_constant;
696 expressionp->X_add_number = abs_section_offset;
698 else
700 expressionp->X_op = O_symbol;
701 expressionp->X_add_symbol = symbol_temp_new_now ();
702 expressionp->X_add_number = 0;
706 /* In: Input_line_pointer points to 1st char of operand, which may
707 be a space.
709 Out: An expressionS.
710 The operand may have been empty: in this case X_op == O_absent.
711 Input_line_pointer->(next non-blank) char after operand. */
713 static segT
714 operand (expressionS *expressionP, enum expr_mode mode)
716 char c;
717 symbolS *symbolP; /* Points to symbol. */
718 char *name; /* Points to name of symbol. */
719 segT segment;
721 /* All integers are regarded as unsigned unless they are negated.
722 This is because the only thing which cares whether a number is
723 unsigned is the code in emit_expr which extends constants into
724 bignums. It should only sign extend negative numbers, so that
725 something like ``.quad 0x80000000'' is not sign extended even
726 though it appears negative if valueT is 32 bits. */
727 expressionP->X_unsigned = 1;
729 /* Digits, assume it is a bignum. */
731 SKIP_WHITESPACE (); /* Leading whitespace is part of operand. */
732 c = *input_line_pointer++; /* input_line_pointer -> past char in c. */
734 if (is_end_of_line[(unsigned char) c])
735 goto eol;
737 switch (c)
739 case '1':
740 case '2':
741 case '3':
742 case '4':
743 case '5':
744 case '6':
745 case '7':
746 case '8':
747 case '9':
748 input_line_pointer--;
750 integer_constant ((NUMBERS_WITH_SUFFIX || flag_m68k_mri)
751 ? 0 : 10,
752 expressionP);
753 break;
755 #ifdef LITERAL_PREFIXDOLLAR_HEX
756 case '$':
757 /* $L is the start of a local label, not a hex constant. */
758 if (* input_line_pointer == 'L')
759 goto isname;
760 integer_constant (16, expressionP);
761 break;
762 #endif
764 #ifdef LITERAL_PREFIXPERCENT_BIN
765 case '%':
766 integer_constant (2, expressionP);
767 break;
768 #endif
770 case '0':
771 /* Non-decimal radix. */
773 if (NUMBERS_WITH_SUFFIX || flag_m68k_mri)
775 char *s;
777 /* Check for a hex or float constant. */
778 for (s = input_line_pointer; hex_p (*s); s++)
780 if (*s == 'h' || *s == 'H' || *input_line_pointer == '.')
782 --input_line_pointer;
783 integer_constant (0, expressionP);
784 break;
787 c = *input_line_pointer;
788 switch (c)
790 case 'o':
791 case 'O':
792 case 'q':
793 case 'Q':
794 case '8':
795 case '9':
796 if (NUMBERS_WITH_SUFFIX || flag_m68k_mri)
798 integer_constant (0, expressionP);
799 break;
801 /* Fall through. */
802 default:
803 default_case:
804 if (c && strchr (FLT_CHARS, c))
806 input_line_pointer++;
807 floating_constant (expressionP);
808 expressionP->X_add_number = - TOLOWER (c);
810 else
812 /* The string was only zero. */
813 expressionP->X_op = O_constant;
814 expressionP->X_add_number = 0;
817 break;
819 case 'x':
820 case 'X':
821 if (flag_m68k_mri)
822 goto default_case;
823 input_line_pointer++;
824 integer_constant (16, expressionP);
825 break;
827 case 'b':
828 if (LOCAL_LABELS_FB && ! (flag_m68k_mri || NUMBERS_WITH_SUFFIX))
830 /* This code used to check for '+' and '-' here, and, in
831 some conditions, fall through to call
832 integer_constant. However, that didn't make sense,
833 as integer_constant only accepts digits. */
834 /* Some of our code elsewhere does permit digits greater
835 than the expected base; for consistency, do the same
836 here. */
837 if (input_line_pointer[1] < '0'
838 || input_line_pointer[1] > '9')
840 /* Parse this as a back reference to label 0. */
841 input_line_pointer--;
842 integer_constant (10, expressionP);
843 break;
845 /* Otherwise, parse this as a binary number. */
847 /* Fall through. */
848 case 'B':
849 input_line_pointer++;
850 if (flag_m68k_mri || NUMBERS_WITH_SUFFIX)
851 goto default_case;
852 integer_constant (2, expressionP);
853 break;
855 case '0':
856 case '1':
857 case '2':
858 case '3':
859 case '4':
860 case '5':
861 case '6':
862 case '7':
863 integer_constant ((flag_m68k_mri || NUMBERS_WITH_SUFFIX)
864 ? 0 : 8,
865 expressionP);
866 break;
868 case 'f':
869 if (LOCAL_LABELS_FB)
871 /* If it says "0f" and it could possibly be a floating point
872 number, make it one. Otherwise, make it a local label,
873 and try to deal with parsing the rest later. */
874 if (!input_line_pointer[1]
875 || (is_end_of_line[0xff & input_line_pointer[1]])
876 || strchr (FLT_CHARS, 'f') == NULL)
877 goto is_0f_label;
879 char *cp = input_line_pointer + 1;
880 int r = atof_generic (&cp, ".", EXP_CHARS,
881 &generic_floating_point_number);
882 switch (r)
884 case 0:
885 case ERROR_EXPONENT_OVERFLOW:
886 if (*cp == 'f' || *cp == 'b')
887 /* Looks like a difference expression. */
888 goto is_0f_label;
889 else if (cp == input_line_pointer + 1)
890 /* No characters has been accepted -- looks like
891 end of operand. */
892 goto is_0f_label;
893 else
894 goto is_0f_float;
895 default:
896 as_fatal (_("expr.c(operand): bad atof_generic return val %d"),
901 /* Okay, now we've sorted it out. We resume at one of these
902 two labels, depending on what we've decided we're probably
903 looking at. */
904 is_0f_label:
905 input_line_pointer--;
906 integer_constant (10, expressionP);
907 break;
909 is_0f_float:
910 /* Fall through. */
914 case 'd':
915 case 'D':
916 if (flag_m68k_mri || NUMBERS_WITH_SUFFIX)
918 integer_constant (0, expressionP);
919 break;
921 /* Fall through. */
922 case 'F':
923 case 'r':
924 case 'e':
925 case 'E':
926 case 'g':
927 case 'G':
928 input_line_pointer++;
929 floating_constant (expressionP);
930 expressionP->X_add_number = - TOLOWER (c);
931 break;
933 case '$':
934 if (LOCAL_LABELS_DOLLAR)
936 integer_constant (10, expressionP);
937 break;
939 else
940 goto default_case;
943 break;
945 case '(':
946 #ifndef NEED_INDEX_OPERATOR
947 case '[':
948 #endif
949 /* Didn't begin with digit & not a name. */
950 if (mode != expr_defer)
951 segment = expression (expressionP);
952 else
953 segment = deferred_expression (expressionP);
954 /* expression () will pass trailing whitespace. */
955 if ((c == '(' && *input_line_pointer != ')')
956 || (c == '[' && *input_line_pointer != ']'))
957 as_bad (_("missing '%c'"), c == '(' ? ')' : ']');
958 else
959 input_line_pointer++;
960 SKIP_WHITESPACE ();
961 /* Here with input_line_pointer -> char after "(...)". */
962 return segment;
964 #ifdef TC_M68K
965 case 'E':
966 if (! flag_m68k_mri || *input_line_pointer != '\'')
967 goto de_fault;
968 as_bad (_("EBCDIC constants are not supported"));
969 /* Fall through. */
970 case 'A':
971 if (! flag_m68k_mri || *input_line_pointer != '\'')
972 goto de_fault;
973 ++input_line_pointer;
974 /* Fall through. */
975 #endif
976 case '\'':
977 if (! flag_m68k_mri)
979 /* Warning: to conform to other people's assemblers NO
980 ESCAPEMENT is permitted for a single quote. The next
981 character, parity errors and all, is taken as the value
982 of the operand. VERY KINKY. */
983 expressionP->X_op = O_constant;
984 expressionP->X_add_number = *input_line_pointer++;
985 break;
988 mri_char_constant (expressionP);
989 break;
991 #ifdef TC_M68K
992 case '"':
993 /* Double quote is the bitwise not operator in MRI mode. */
994 if (! flag_m68k_mri)
995 goto de_fault;
996 /* Fall through. */
997 #endif
998 case '~':
999 /* '~' is permitted to start a label on the Delta. */
1000 if (is_name_beginner (c))
1001 goto isname;
1002 case '!':
1003 case '-':
1004 case '+':
1006 /* Do not accept ++e or --e as +(+e) or -(-e)
1007 Disabled, since the preprocessor removes whitespace. */
1008 if (0 && (c == '-' || c == '+') && *input_line_pointer == c)
1009 goto target_op;
1011 operand (expressionP, mode);
1012 if (expressionP->X_op == O_constant)
1014 /* input_line_pointer -> char after operand. */
1015 if (c == '-')
1017 expressionP->X_add_number = - expressionP->X_add_number;
1018 /* Notice: '-' may overflow: no warning is given.
1019 This is compatible with other people's
1020 assemblers. Sigh. */
1021 expressionP->X_unsigned = 0;
1023 else if (c == '~' || c == '"')
1024 expressionP->X_add_number = ~ expressionP->X_add_number;
1025 else if (c == '!')
1026 expressionP->X_add_number = ! expressionP->X_add_number;
1028 else if (expressionP->X_op == O_big
1029 && expressionP->X_add_number <= 0
1030 && c == '-'
1031 && (generic_floating_point_number.sign == '+'
1032 || generic_floating_point_number.sign == 'P'))
1034 /* Negative flonum (eg, -1.000e0). */
1035 if (generic_floating_point_number.sign == '+')
1036 generic_floating_point_number.sign = '-';
1037 else
1038 generic_floating_point_number.sign = 'N';
1040 else if (expressionP->X_op == O_big
1041 && expressionP->X_add_number > 0)
1043 int i;
1045 if (c == '~' || c == '-')
1047 for (i = 0; i < expressionP->X_add_number; ++i)
1048 generic_bignum[i] = ~generic_bignum[i];
1049 if (c == '-')
1050 for (i = 0; i < expressionP->X_add_number; ++i)
1052 generic_bignum[i] += 1;
1053 if (generic_bignum[i])
1054 break;
1057 else if (c == '!')
1059 int nonzero = 0;
1060 for (i = 0; i < expressionP->X_add_number; ++i)
1062 if (generic_bignum[i])
1063 nonzero = 1;
1064 generic_bignum[i] = 0;
1066 generic_bignum[0] = nonzero;
1069 else if (expressionP->X_op != O_illegal
1070 && expressionP->X_op != O_absent)
1072 if (c != '+')
1074 expressionP->X_add_symbol = make_expr_symbol (expressionP);
1075 if (c == '-')
1076 expressionP->X_op = O_uminus;
1077 else if (c == '~' || c == '"')
1078 expressionP->X_op = O_bit_not;
1079 else
1080 expressionP->X_op = O_logical_not;
1081 expressionP->X_add_number = 0;
1084 else
1085 as_warn (_("Unary operator %c ignored because bad operand follows"),
1088 break;
1090 #if defined (DOLLAR_DOT) || defined (TC_M68K)
1091 case '$':
1092 /* '$' is the program counter when in MRI mode, or when
1093 DOLLAR_DOT is defined. */
1094 #ifndef DOLLAR_DOT
1095 if (! flag_m68k_mri)
1096 goto de_fault;
1097 #endif
1098 if (DOLLAR_AMBIGU && hex_p (*input_line_pointer))
1100 /* In MRI mode and on Z80, '$' is also used as the prefix
1101 for a hexadecimal constant. */
1102 integer_constant (16, expressionP);
1103 break;
1106 if (is_part_of_name (*input_line_pointer))
1107 goto isname;
1109 current_location (expressionP);
1110 break;
1111 #endif
1113 case '.':
1114 if (!is_part_of_name (*input_line_pointer))
1116 current_location (expressionP);
1117 break;
1119 else if ((strncasecmp (input_line_pointer, "startof.", 8) == 0
1120 && ! is_part_of_name (input_line_pointer[8]))
1121 || (strncasecmp (input_line_pointer, "sizeof.", 7) == 0
1122 && ! is_part_of_name (input_line_pointer[7])))
1124 int start;
1126 start = (input_line_pointer[1] == 't'
1127 || input_line_pointer[1] == 'T');
1128 input_line_pointer += start ? 8 : 7;
1129 SKIP_WHITESPACE ();
1130 if (*input_line_pointer != '(')
1131 as_bad (_("syntax error in .startof. or .sizeof."));
1132 else
1134 char *buf;
1136 ++input_line_pointer;
1137 SKIP_WHITESPACE ();
1138 name = input_line_pointer;
1139 c = get_symbol_end ();
1141 buf = (char *) xmalloc (strlen (name) + 10);
1142 if (start)
1143 sprintf (buf, ".startof.%s", name);
1144 else
1145 sprintf (buf, ".sizeof.%s", name);
1146 symbolP = symbol_make (buf);
1147 free (buf);
1149 expressionP->X_op = O_symbol;
1150 expressionP->X_add_symbol = symbolP;
1151 expressionP->X_add_number = 0;
1153 *input_line_pointer = c;
1154 SKIP_WHITESPACE ();
1155 if (*input_line_pointer != ')')
1156 as_bad (_("syntax error in .startof. or .sizeof."));
1157 else
1158 ++input_line_pointer;
1160 break;
1162 else
1164 goto isname;
1167 case ',':
1168 eol:
1169 /* Can't imagine any other kind of operand. */
1170 expressionP->X_op = O_absent;
1171 input_line_pointer--;
1172 break;
1174 #ifdef TC_M68K
1175 case '%':
1176 if (! flag_m68k_mri)
1177 goto de_fault;
1178 integer_constant (2, expressionP);
1179 break;
1181 case '@':
1182 if (! flag_m68k_mri)
1183 goto de_fault;
1184 integer_constant (8, expressionP);
1185 break;
1187 case ':':
1188 if (! flag_m68k_mri)
1189 goto de_fault;
1191 /* In MRI mode, this is a floating point constant represented
1192 using hexadecimal digits. */
1194 ++input_line_pointer;
1195 integer_constant (16, expressionP);
1196 break;
1198 case '*':
1199 if (! flag_m68k_mri || is_part_of_name (*input_line_pointer))
1200 goto de_fault;
1202 current_location (expressionP);
1203 break;
1204 #endif
1206 default:
1207 #ifdef TC_M68K
1208 de_fault:
1209 #endif
1210 if (is_name_beginner (c)) /* Here if did not begin with a digit. */
1212 /* Identifier begins here.
1213 This is kludged for speed, so code is repeated. */
1214 isname:
1215 name = --input_line_pointer;
1216 c = get_symbol_end ();
1218 #ifdef md_parse_name
1219 /* This is a hook for the backend to parse certain names
1220 specially in certain contexts. If a name always has a
1221 specific value, it can often be handled by simply
1222 entering it in the symbol table. */
1223 if (md_parse_name (name, expressionP, mode, &c))
1225 *input_line_pointer = c;
1226 break;
1228 #endif
1230 #ifdef TC_I960
1231 /* The MRI i960 assembler permits
1232 lda sizeof code,g13
1233 FIXME: This should use md_parse_name. */
1234 if (flag_mri
1235 && (strcasecmp (name, "sizeof") == 0
1236 || strcasecmp (name, "startof") == 0))
1238 int start;
1239 char *buf;
1241 start = (name[1] == 't'
1242 || name[1] == 'T');
1244 *input_line_pointer = c;
1245 SKIP_WHITESPACE ();
1247 name = input_line_pointer;
1248 c = get_symbol_end ();
1250 buf = (char *) xmalloc (strlen (name) + 10);
1251 if (start)
1252 sprintf (buf, ".startof.%s", name);
1253 else
1254 sprintf (buf, ".sizeof.%s", name);
1255 symbolP = symbol_make (buf);
1256 free (buf);
1258 expressionP->X_op = O_symbol;
1259 expressionP->X_add_symbol = symbolP;
1260 expressionP->X_add_number = 0;
1262 *input_line_pointer = c;
1263 SKIP_WHITESPACE ();
1265 break;
1267 #endif
1269 symbolP = symbol_find_or_make (name);
1271 /* If we have an absolute symbol or a reg, then we know its
1272 value now. */
1273 segment = S_GET_SEGMENT (symbolP);
1274 if (mode != expr_defer && segment == absolute_section)
1276 expressionP->X_op = O_constant;
1277 expressionP->X_add_number = S_GET_VALUE (symbolP);
1279 else if (mode != expr_defer && segment == reg_section)
1281 expressionP->X_op = O_register;
1282 expressionP->X_add_number = S_GET_VALUE (symbolP);
1284 else
1286 expressionP->X_op = O_symbol;
1287 expressionP->X_add_symbol = symbolP;
1288 expressionP->X_add_number = 0;
1290 *input_line_pointer = c;
1292 else
1294 target_op:
1295 /* Let the target try to parse it. Success is indicated by changing
1296 the X_op field to something other than O_absent and pointing
1297 input_line_pointer past the expression. If it can't parse the
1298 expression, X_op and input_line_pointer should be unchanged. */
1299 expressionP->X_op = O_absent;
1300 --input_line_pointer;
1301 md_operand (expressionP);
1302 if (expressionP->X_op == O_absent)
1304 ++input_line_pointer;
1305 as_bad (_("bad expression"));
1306 expressionP->X_op = O_constant;
1307 expressionP->X_add_number = 0;
1310 break;
1313 /* It is more 'efficient' to clean up the expressionS when they are
1314 created. Doing it here saves lines of code. */
1315 clean_up_expression (expressionP);
1316 SKIP_WHITESPACE (); /* -> 1st char after operand. */
1317 know (*input_line_pointer != ' ');
1319 /* The PA port needs this information. */
1320 if (expressionP->X_add_symbol)
1321 symbol_mark_used (expressionP->X_add_symbol);
1323 expressionP->X_add_symbol = symbol_clone_if_forward_ref (expressionP->X_add_symbol);
1324 expressionP->X_op_symbol = symbol_clone_if_forward_ref (expressionP->X_op_symbol);
1326 switch (expressionP->X_op)
1328 default:
1329 return absolute_section;
1330 case O_symbol:
1331 return S_GET_SEGMENT (expressionP->X_add_symbol);
1332 case O_register:
1333 return reg_section;
1337 /* Internal. Simplify a struct expression for use by expr (). */
1339 /* In: address of an expressionS.
1340 The X_op field of the expressionS may only take certain values.
1341 Elsewise we waste time special-case testing. Sigh. Ditto SEG_ABSENT.
1343 Out: expressionS may have been modified:
1344 Unused fields zeroed to help expr (). */
1346 static void
1347 clean_up_expression (expressionS *expressionP)
1349 switch (expressionP->X_op)
1351 case O_illegal:
1352 case O_absent:
1353 expressionP->X_add_number = 0;
1354 /* Fall through. */
1355 case O_big:
1356 case O_constant:
1357 case O_register:
1358 expressionP->X_add_symbol = NULL;
1359 /* Fall through. */
1360 case O_symbol:
1361 case O_uminus:
1362 case O_bit_not:
1363 expressionP->X_op_symbol = NULL;
1364 break;
1365 default:
1366 break;
1370 /* Expression parser. */
1372 /* We allow an empty expression, and just assume (absolute,0) silently.
1373 Unary operators and parenthetical expressions are treated as operands.
1374 As usual, Q==quantity==operand, O==operator, X==expression mnemonics.
1376 We used to do an aho/ullman shift-reduce parser, but the logic got so
1377 warped that I flushed it and wrote a recursive-descent parser instead.
1378 Now things are stable, would anybody like to write a fast parser?
1379 Most expressions are either register (which does not even reach here)
1380 or 1 symbol. Then "symbol+constant" and "symbol-symbol" are common.
1381 So I guess it doesn't really matter how inefficient more complex expressions
1382 are parsed.
1384 After expr(RANK,resultP) input_line_pointer->operator of rank <= RANK.
1385 Also, we have consumed any leading or trailing spaces (operand does that)
1386 and done all intervening operators.
1388 This returns the segment of the result, which will be
1389 absolute_section or the segment of a symbol. */
1391 #undef __
1392 #define __ O_illegal
1393 #ifndef O_SINGLE_EQ
1394 #define O_SINGLE_EQ O_illegal
1395 #endif
1397 /* Maps ASCII -> operators. */
1398 static const operatorT op_encoding[256] = {
1399 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1400 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1402 __, O_bit_or_not, __, __, __, O_modulus, O_bit_and, __,
1403 __, __, O_multiply, O_add, __, O_subtract, __, O_divide,
1404 __, __, __, __, __, __, __, __,
1405 __, __, __, __, O_lt, O_SINGLE_EQ, O_gt, __,
1406 __, __, __, __, __, __, __, __,
1407 __, __, __, __, __, __, __, __,
1408 __, __, __, __, __, __, __, __,
1409 __, __, __,
1410 #ifdef NEED_INDEX_OPERATOR
1411 O_index,
1412 #else
1414 #endif
1415 __, __, O_bit_exclusive_or, __,
1416 __, __, __, __, __, __, __, __,
1417 __, __, __, __, __, __, __, __,
1418 __, __, __, __, __, __, __, __,
1419 __, __, __, __, O_bit_inclusive_or, __, __, __,
1421 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1422 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1423 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1424 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1425 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1426 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1427 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1428 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __
1431 /* Rank Examples
1432 0 operand, (expression)
1433 1 ||
1434 2 &&
1435 3 == <> < <= >= >
1436 4 + -
1437 5 used for * / % in MRI mode
1438 6 & ^ ! |
1439 7 * / % << >>
1440 8 unary - unary ~
1442 static operator_rankT op_rank[] = {
1443 0, /* O_illegal */
1444 0, /* O_absent */
1445 0, /* O_constant */
1446 0, /* O_symbol */
1447 0, /* O_symbol_rva */
1448 0, /* O_register */
1449 0, /* O_big */
1450 9, /* O_uminus */
1451 9, /* O_bit_not */
1452 9, /* O_logical_not */
1453 8, /* O_multiply */
1454 8, /* O_divide */
1455 8, /* O_modulus */
1456 8, /* O_left_shift */
1457 8, /* O_right_shift */
1458 7, /* O_bit_inclusive_or */
1459 7, /* O_bit_or_not */
1460 7, /* O_bit_exclusive_or */
1461 7, /* O_bit_and */
1462 5, /* O_add */
1463 5, /* O_subtract */
1464 4, /* O_eq */
1465 4, /* O_ne */
1466 4, /* O_lt */
1467 4, /* O_le */
1468 4, /* O_ge */
1469 4, /* O_gt */
1470 3, /* O_logical_and */
1471 2, /* O_logical_or */
1472 1, /* O_index */
1473 0, /* O_md1 */
1474 0, /* O_md2 */
1475 0, /* O_md3 */
1476 0, /* O_md4 */
1477 0, /* O_md5 */
1478 0, /* O_md6 */
1479 0, /* O_md7 */
1480 0, /* O_md8 */
1481 0, /* O_md9 */
1482 0, /* O_md10 */
1483 0, /* O_md11 */
1484 0, /* O_md12 */
1485 0, /* O_md13 */
1486 0, /* O_md14 */
1487 0, /* O_md15 */
1488 0, /* O_md16 */
1491 /* Unfortunately, in MRI mode for the m68k, multiplication and
1492 division have lower precedence than the bit wise operators. This
1493 function sets the operator precedences correctly for the current
1494 mode. Also, MRI uses a different bit_not operator, and this fixes
1495 that as well. */
1497 #define STANDARD_MUL_PRECEDENCE 8
1498 #define MRI_MUL_PRECEDENCE 6
1500 void
1501 expr_set_precedence (void)
1503 if (flag_m68k_mri)
1505 op_rank[O_multiply] = MRI_MUL_PRECEDENCE;
1506 op_rank[O_divide] = MRI_MUL_PRECEDENCE;
1507 op_rank[O_modulus] = MRI_MUL_PRECEDENCE;
1509 else
1511 op_rank[O_multiply] = STANDARD_MUL_PRECEDENCE;
1512 op_rank[O_divide] = STANDARD_MUL_PRECEDENCE;
1513 op_rank[O_modulus] = STANDARD_MUL_PRECEDENCE;
1517 /* Initialize the expression parser. */
1519 void
1520 expr_begin (void)
1522 expr_set_precedence ();
1524 /* Verify that X_op field is wide enough. */
1526 expressionS e;
1527 e.X_op = O_max;
1528 assert (e.X_op == O_max);
1532 /* Return the encoding for the operator at INPUT_LINE_POINTER, and
1533 sets NUM_CHARS to the number of characters in the operator.
1534 Does not advance INPUT_LINE_POINTER. */
1536 static inline operatorT
1537 operator (int *num_chars)
1539 int c;
1540 operatorT ret;
1542 c = *input_line_pointer & 0xff;
1543 *num_chars = 1;
1545 if (is_end_of_line[c])
1546 return O_illegal;
1548 switch (c)
1550 default:
1551 return op_encoding[c];
1553 case '+':
1554 case '-':
1555 /* Do not allow a++b and a--b to be a + (+b) and a - (-b)
1556 Disabled, since the preprocessor removes whitespace. */
1557 if (1 || input_line_pointer[1] != c)
1558 return op_encoding[c];
1559 return O_illegal;
1561 case '<':
1562 switch (input_line_pointer[1])
1564 default:
1565 return op_encoding[c];
1566 case '<':
1567 ret = O_left_shift;
1568 break;
1569 case '>':
1570 ret = O_ne;
1571 break;
1572 case '=':
1573 ret = O_le;
1574 break;
1576 *num_chars = 2;
1577 return ret;
1579 case '=':
1580 if (input_line_pointer[1] != '=')
1581 return op_encoding[c];
1583 *num_chars = 2;
1584 return O_eq;
1586 case '>':
1587 switch (input_line_pointer[1])
1589 default:
1590 return op_encoding[c];
1591 case '>':
1592 ret = O_right_shift;
1593 break;
1594 case '=':
1595 ret = O_ge;
1596 break;
1598 *num_chars = 2;
1599 return ret;
1601 case '!':
1602 switch (input_line_pointer[1])
1604 case '!':
1605 /* We accept !! as equivalent to ^ for MRI compatibility. */
1606 *num_chars = 2;
1607 return O_bit_exclusive_or;
1608 case '=':
1609 /* We accept != as equivalent to <>. */
1610 *num_chars = 2;
1611 return O_ne;
1612 default:
1613 if (flag_m68k_mri)
1614 return O_bit_inclusive_or;
1615 return op_encoding[c];
1618 case '|':
1619 if (input_line_pointer[1] != '|')
1620 return op_encoding[c];
1622 *num_chars = 2;
1623 return O_logical_or;
1625 case '&':
1626 if (input_line_pointer[1] != '&')
1627 return op_encoding[c];
1629 *num_chars = 2;
1630 return O_logical_and;
1633 /* NOTREACHED */
1636 /* Parse an expression. */
1638 segT
1639 expr (int rankarg, /* Larger # is higher rank. */
1640 expressionS *resultP, /* Deliver result here. */
1641 enum expr_mode mode /* Controls behavior. */)
1643 operator_rankT rank = (operator_rankT) rankarg;
1644 segT retval;
1645 expressionS right;
1646 operatorT op_left;
1647 operatorT op_right;
1648 int op_chars;
1650 know (rank >= 0);
1652 /* Save the value of dot for the fixup code. */
1653 if (rank == 0)
1654 dot_value = frag_now_fix ();
1656 retval = operand (resultP, mode);
1658 /* operand () gobbles spaces. */
1659 know (*input_line_pointer != ' ');
1661 op_left = operator (&op_chars);
1662 while (op_left != O_illegal && op_rank[(int) op_left] > rank)
1664 segT rightseg;
1666 input_line_pointer += op_chars; /* -> after operator. */
1668 rightseg = expr (op_rank[(int) op_left], &right, mode);
1669 if (right.X_op == O_absent)
1671 as_warn (_("missing operand; zero assumed"));
1672 right.X_op = O_constant;
1673 right.X_add_number = 0;
1674 right.X_add_symbol = NULL;
1675 right.X_op_symbol = NULL;
1678 know (*input_line_pointer != ' ');
1680 if (op_left == O_index)
1682 if (*input_line_pointer != ']')
1683 as_bad ("missing right bracket");
1684 else
1686 ++input_line_pointer;
1687 SKIP_WHITESPACE ();
1691 op_right = operator (&op_chars);
1693 know (op_right == O_illegal
1694 || op_rank[(int) op_right] <= op_rank[(int) op_left]);
1695 know ((int) op_left >= (int) O_multiply
1696 && (int) op_left <= (int) O_index);
1698 /* input_line_pointer->after right-hand quantity. */
1699 /* left-hand quantity in resultP. */
1700 /* right-hand quantity in right. */
1701 /* operator in op_left. */
1703 if (resultP->X_op == O_big)
1705 if (resultP->X_add_number > 0)
1706 as_warn (_("left operand is a bignum; integer 0 assumed"));
1707 else
1708 as_warn (_("left operand is a float; integer 0 assumed"));
1709 resultP->X_op = O_constant;
1710 resultP->X_add_number = 0;
1711 resultP->X_add_symbol = NULL;
1712 resultP->X_op_symbol = NULL;
1714 if (right.X_op == O_big)
1716 if (right.X_add_number > 0)
1717 as_warn (_("right operand is a bignum; integer 0 assumed"));
1718 else
1719 as_warn (_("right operand is a float; integer 0 assumed"));
1720 right.X_op = O_constant;
1721 right.X_add_number = 0;
1722 right.X_add_symbol = NULL;
1723 right.X_op_symbol = NULL;
1726 /* Optimize common cases. */
1727 #ifdef md_optimize_expr
1728 if (md_optimize_expr (resultP, op_left, &right))
1730 /* Skip. */
1733 else
1734 #endif
1735 if (op_left == O_add && right.X_op == O_constant)
1737 /* X + constant. */
1738 resultP->X_add_number += right.X_add_number;
1740 /* This case comes up in PIC code. */
1741 else if (op_left == O_subtract
1742 && right.X_op == O_symbol
1743 && resultP->X_op == O_symbol
1744 && (symbol_get_frag (right.X_add_symbol)
1745 == symbol_get_frag (resultP->X_add_symbol))
1746 && (SEG_NORMAL (rightseg)
1747 || right.X_add_symbol == resultP->X_add_symbol))
1749 resultP->X_add_number -= right.X_add_number;
1750 resultP->X_add_number += (S_GET_VALUE (resultP->X_add_symbol)
1751 - S_GET_VALUE (right.X_add_symbol));
1752 resultP->X_op = O_constant;
1753 resultP->X_add_symbol = 0;
1755 else if (op_left == O_subtract && right.X_op == O_constant)
1757 /* X - constant. */
1758 resultP->X_add_number -= right.X_add_number;
1760 else if (op_left == O_add && resultP->X_op == O_constant)
1762 /* Constant + X. */
1763 resultP->X_op = right.X_op;
1764 resultP->X_add_symbol = right.X_add_symbol;
1765 resultP->X_op_symbol = right.X_op_symbol;
1766 resultP->X_add_number += right.X_add_number;
1767 retval = rightseg;
1769 else if (resultP->X_op == O_constant && right.X_op == O_constant)
1771 /* Constant OP constant. */
1772 offsetT v = right.X_add_number;
1773 if (v == 0 && (op_left == O_divide || op_left == O_modulus))
1775 as_warn (_("division by zero"));
1776 v = 1;
1778 switch (op_left)
1780 default: abort ();
1781 case O_multiply: resultP->X_add_number *= v; break;
1782 case O_divide: resultP->X_add_number /= v; break;
1783 case O_modulus: resultP->X_add_number %= v; break;
1784 case O_left_shift: resultP->X_add_number <<= v; break;
1785 case O_right_shift:
1786 /* We always use unsigned shifts, to avoid relying on
1787 characteristics of the compiler used to compile gas. */
1788 resultP->X_add_number =
1789 (offsetT) ((valueT) resultP->X_add_number >> (valueT) v);
1790 break;
1791 case O_bit_inclusive_or: resultP->X_add_number |= v; break;
1792 case O_bit_or_not: resultP->X_add_number |= ~v; break;
1793 case O_bit_exclusive_or: resultP->X_add_number ^= v; break;
1794 case O_bit_and: resultP->X_add_number &= v; break;
1795 case O_add: resultP->X_add_number += v; break;
1796 case O_subtract: resultP->X_add_number -= v; break;
1797 case O_eq:
1798 resultP->X_add_number =
1799 resultP->X_add_number == v ? ~ (offsetT) 0 : 0;
1800 break;
1801 case O_ne:
1802 resultP->X_add_number =
1803 resultP->X_add_number != v ? ~ (offsetT) 0 : 0;
1804 break;
1805 case O_lt:
1806 resultP->X_add_number =
1807 resultP->X_add_number < v ? ~ (offsetT) 0 : 0;
1808 break;
1809 case O_le:
1810 resultP->X_add_number =
1811 resultP->X_add_number <= v ? ~ (offsetT) 0 : 0;
1812 break;
1813 case O_ge:
1814 resultP->X_add_number =
1815 resultP->X_add_number >= v ? ~ (offsetT) 0 : 0;
1816 break;
1817 case O_gt:
1818 resultP->X_add_number =
1819 resultP->X_add_number > v ? ~ (offsetT) 0 : 0;
1820 break;
1821 case O_logical_and:
1822 resultP->X_add_number = resultP->X_add_number && v;
1823 break;
1824 case O_logical_or:
1825 resultP->X_add_number = resultP->X_add_number || v;
1826 break;
1829 else if (resultP->X_op == O_symbol
1830 && right.X_op == O_symbol
1831 && (op_left == O_add
1832 || op_left == O_subtract
1833 || (resultP->X_add_number == 0
1834 && right.X_add_number == 0)))
1836 /* Symbol OP symbol. */
1837 resultP->X_op = op_left;
1838 resultP->X_op_symbol = right.X_add_symbol;
1839 if (op_left == O_add)
1840 resultP->X_add_number += right.X_add_number;
1841 else if (op_left == O_subtract)
1843 resultP->X_add_number -= right.X_add_number;
1844 if (retval == rightseg && SEG_NORMAL (retval))
1846 retval = absolute_section;
1847 rightseg = absolute_section;
1851 else
1853 /* The general case. */
1854 resultP->X_add_symbol = make_expr_symbol (resultP);
1855 resultP->X_op_symbol = make_expr_symbol (&right);
1856 resultP->X_op = op_left;
1857 resultP->X_add_number = 0;
1858 resultP->X_unsigned = 1;
1861 if (retval != rightseg)
1863 if (! SEG_NORMAL (retval))
1865 if (retval != undefined_section || SEG_NORMAL (rightseg))
1866 retval = rightseg;
1868 else if (SEG_NORMAL (rightseg)
1869 #ifdef DIFF_EXPR_OK
1870 && op_left != O_subtract
1871 #endif
1873 as_bad (_("operation combines symbols in different segments"));
1876 op_left = op_right;
1877 } /* While next operator is >= this rank. */
1879 /* The PA port needs this information. */
1880 if (resultP->X_add_symbol)
1881 symbol_mark_used (resultP->X_add_symbol);
1883 if (rank == 0 && mode == expr_evaluate)
1884 resolve_expression (resultP);
1886 return resultP->X_op == O_constant ? absolute_section : retval;
1889 /* Resolve an expression without changing any symbols/sub-expressions
1890 used. */
1893 resolve_expression (expressionS *expressionP)
1895 /* Help out with CSE. */
1896 valueT final_val = expressionP->X_add_number;
1897 symbolS *add_symbol = expressionP->X_add_symbol;
1898 symbolS *op_symbol = expressionP->X_op_symbol;
1899 operatorT op = expressionP->X_op;
1900 valueT left, right;
1901 segT seg_left, seg_right;
1902 fragS *frag_left, *frag_right;
1904 switch (op)
1906 default:
1907 return 0;
1909 case O_constant:
1910 case O_register:
1911 left = 0;
1912 break;
1914 case O_symbol:
1915 case O_symbol_rva:
1916 if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left))
1917 return 0;
1919 break;
1921 case O_uminus:
1922 case O_bit_not:
1923 case O_logical_not:
1924 if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left))
1925 return 0;
1927 if (seg_left != absolute_section)
1928 return 0;
1930 if (op == O_logical_not)
1931 left = !left;
1932 else if (op == O_uminus)
1933 left = -left;
1934 else
1935 left = ~left;
1936 op = O_constant;
1937 break;
1939 case O_multiply:
1940 case O_divide:
1941 case O_modulus:
1942 case O_left_shift:
1943 case O_right_shift:
1944 case O_bit_inclusive_or:
1945 case O_bit_or_not:
1946 case O_bit_exclusive_or:
1947 case O_bit_and:
1948 case O_add:
1949 case O_subtract:
1950 case O_eq:
1951 case O_ne:
1952 case O_lt:
1953 case O_le:
1954 case O_ge:
1955 case O_gt:
1956 case O_logical_and:
1957 case O_logical_or:
1958 if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left)
1959 || !snapshot_symbol (&op_symbol, &right, &seg_right, &frag_right))
1960 return 0;
1962 /* Simplify addition or subtraction of a constant by folding the
1963 constant into X_add_number. */
1964 if (op == O_add)
1966 if (seg_right == absolute_section)
1968 final_val += right;
1969 op = O_symbol;
1970 break;
1972 else if (seg_left == absolute_section)
1974 final_val += left;
1975 left = right;
1976 seg_left = seg_right;
1977 add_symbol = op_symbol;
1978 op = O_symbol;
1979 break;
1982 else if (op == O_subtract)
1984 if (seg_right == absolute_section)
1986 final_val -= right;
1987 op = O_symbol;
1988 break;
1992 /* Equality and non-equality tests are permitted on anything.
1993 Subtraction, and other comparison operators are permitted if
1994 both operands are in the same section.
1995 Shifts by constant zero are permitted on anything.
1996 Multiplies, bit-ors, and bit-ands with constant zero are
1997 permitted on anything.
1998 Multiplies and divides by constant one are permitted on
1999 anything.
2000 Binary operations with both operands being the same register
2001 or undefined symbol are permitted if the result doesn't depend
2002 on the input value.
2003 Otherwise, both operands must be absolute. We already handled
2004 the case of addition or subtraction of a constant above. */
2005 if (!(seg_left == absolute_section
2006 && seg_right == absolute_section)
2007 && !(op == O_eq || op == O_ne)
2008 && !((op == O_subtract
2009 || op == O_lt || op == O_le || op == O_ge || op == O_gt)
2010 && seg_left == seg_right
2011 && (finalize_syms || frag_left == frag_right)
2012 && (seg_left != reg_section || left == right)
2013 && (seg_left != undefined_section || add_symbol == op_symbol)))
2015 if ((seg_left == absolute_section && left == 0)
2016 || (seg_right == absolute_section && right == 0))
2018 if (op == O_bit_exclusive_or || op == O_bit_inclusive_or)
2020 if (seg_right != absolute_section || right != 0)
2022 seg_left = seg_right;
2023 left = right;
2024 add_symbol = op_symbol;
2026 op = O_symbol;
2027 break;
2029 else if (op == O_left_shift || op == O_right_shift)
2031 if (seg_left != absolute_section || left != 0)
2033 op = O_symbol;
2034 break;
2037 else if (op != O_multiply
2038 && op != O_bit_or_not && op != O_bit_and)
2039 return 0;
2041 else if (op == O_multiply
2042 && seg_left == absolute_section && left == 1)
2044 seg_left = seg_right;
2045 left = right;
2046 add_symbol = op_symbol;
2047 op = O_symbol;
2048 break;
2050 else if ((op == O_multiply || op == O_divide)
2051 && seg_right == absolute_section && right == 1)
2053 op = O_symbol;
2054 break;
2056 else if (left != right
2057 || ((seg_left != reg_section || seg_right != reg_section)
2058 && (seg_left != undefined_section
2059 || seg_right != undefined_section
2060 || add_symbol != op_symbol)))
2061 return 0;
2062 else if (op == O_bit_and || op == O_bit_inclusive_or)
2064 op = O_symbol;
2065 break;
2067 else if (op != O_bit_exclusive_or && op != O_bit_or_not)
2068 return 0;
2071 switch (op)
2073 case O_add: left += right; break;
2074 case O_subtract: left -= right; break;
2075 case O_multiply: left *= right; break;
2076 case O_divide:
2077 if (right == 0)
2078 return 0;
2079 left = (offsetT) left / (offsetT) right;
2080 break;
2081 case O_modulus:
2082 if (right == 0)
2083 return 0;
2084 left = (offsetT) left % (offsetT) right;
2085 break;
2086 case O_left_shift: left <<= right; break;
2087 case O_right_shift: left >>= right; break;
2088 case O_bit_inclusive_or: left |= right; break;
2089 case O_bit_or_not: left |= ~right; break;
2090 case O_bit_exclusive_or: left ^= right; break;
2091 case O_bit_and: left &= right; break;
2092 case O_eq:
2093 case O_ne:
2094 left = (left == right
2095 && seg_left == seg_right
2096 && (finalize_syms || frag_left == frag_right)
2097 && (seg_left != undefined_section
2098 || add_symbol == op_symbol)
2099 ? ~ (valueT) 0 : 0);
2100 if (op == O_ne)
2101 left = ~left;
2102 break;
2103 case O_lt:
2104 left = (offsetT) left < (offsetT) right ? ~ (valueT) 0 : 0;
2105 break;
2106 case O_le:
2107 left = (offsetT) left <= (offsetT) right ? ~ (valueT) 0 : 0;
2108 break;
2109 case O_ge:
2110 left = (offsetT) left >= (offsetT) right ? ~ (valueT) 0 : 0;
2111 break;
2112 case O_gt:
2113 left = (offsetT) left > (offsetT) right ? ~ (valueT) 0 : 0;
2114 break;
2115 case O_logical_and: left = left && right; break;
2116 case O_logical_or: left = left || right; break;
2117 default: abort ();
2120 op = O_constant;
2121 break;
2124 if (op == O_symbol)
2126 if (seg_left == absolute_section)
2127 op = O_constant;
2128 else if (seg_left == reg_section && final_val == 0)
2129 op = O_register;
2130 else if (add_symbol != expressionP->X_add_symbol)
2131 final_val += left;
2132 expressionP->X_add_symbol = add_symbol;
2134 expressionP->X_op = op;
2136 if (op == O_constant || op == O_register)
2137 final_val += left;
2138 expressionP->X_add_number = final_val;
2140 return 1;
2143 /* This lives here because it belongs equally in expr.c & read.c.
2144 expr.c is just a branch office read.c anyway, and putting it
2145 here lessens the crowd at read.c.
2147 Assume input_line_pointer is at start of symbol name.
2148 Advance input_line_pointer past symbol name.
2149 Turn that character into a '\0', returning its former value.
2150 This allows a string compare (RMS wants symbol names to be strings)
2151 of the symbol name.
2152 There will always be a char following symbol name, because all good
2153 lines end in end-of-line. */
2155 char
2156 get_symbol_end (void)
2158 char c;
2160 /* We accept \001 in a name in case this is being called with a
2161 constructed string. */
2162 if (is_name_beginner (c = *input_line_pointer++) || c == '\001')
2164 while (is_part_of_name (c = *input_line_pointer++)
2165 || c == '\001')
2167 if (is_name_ender (c))
2168 c = *input_line_pointer++;
2170 *--input_line_pointer = 0;
2171 return (c);
2174 unsigned int
2175 get_single_number (void)
2177 expressionS exp;
2178 operand (&exp, expr_normal);
2179 return exp.X_add_number;