binutils/doc/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkgincludedir = $(includedir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkglibexecdir = $(libexecdir)/@PACKAGE@
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 build_triplet = @build@
  35 host_triplet = @host@
  36 target_triplet = @target@
  37 subdir = doc
  38 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
  41         $(top_srcdir)/../config/zlib.m4 \
  42         $(top_srcdir)/../bfd/warning.m4 \
  43         $(top_srcdir)/../config/depstand.m4 \
  44         $(top_srcdir)/../config/gettext-sister.m4 \
  45         $(top_srcdir)/../config/iconv.m4 \
  46         $(top_srcdir)/../config/largefile.m4 \
  47         $(top_srcdir)/../config/lead-dot.m4 \
  48         $(top_srcdir)/../config/lib-ld.m4 \
  49         $(top_srcdir)/../config/lib-link.m4 \
  50         $(top_srcdir)/../config/lib-prefix.m4 \
  51         $(top_srcdir)/../config/nls.m4 \
  52         $(top_srcdir)/../config/override.m4 \
  53         $(top_srcdir)/../config/plugins.m4 \
  54         $(top_srcdir)/../config/po.m4 \
  55         $(top_srcdir)/../config/progtest.m4 \
  56         $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
  57         $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
  58         $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.in
  59 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  60         $(ACLOCAL_M4)
  61 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
  62 CONFIG_HEADER = $(top_builddir)/config.h
  63 CONFIG_CLEAN_FILES =
  64 CONFIG_CLEAN_VPATH_FILES =
  65 depcomp =
  66 am__depfiles_maybe =
  67 SOURCES =
  68 INFO_DEPS = binutils.info
  69 TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
  70 am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
  71 DVIS = binutils.dvi
  72 PDFS = binutils.pdf
  73 PSS = binutils.ps
  74 HTMLS = binutils.html
  75 TEXINFOS = binutils.texi
  76 TEXI2PDF = $(TEXI2DVI) --pdf --batch
  77 MAKEINFOHTML = $(MAKEINFO) --html
  78 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
  79 DVIPS = dvips
  80 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  81 am__vpath_adj = case $$p in \
  82     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  83     *) f=$$p;; \
  84   esac;
  85 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  86 am__install_max = 40
  87 am__nobase_strip_setup = \
  88   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  89 am__nobase_strip = \
  90   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  91 am__nobase_list = $(am__nobase_strip_setup); \
  92   for p in $$list; do echo "$$p $$p"; done | \
  93   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  94   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  95     if (++n[$$2] == $(am__install_max)) \
  96       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  97     END { for (dir in files) print dir, files[dir] }'
  98 am__base_list = \
  99   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 100   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 101 man1dir = $(mandir)/man1
 102 am__installdirs = "$(DESTDIR)$(man1dir)"
 103 NROFF = nroff
 104 MANS = $(man_MANS)
 105 ACLOCAL = @ACLOCAL@
 106 ALLOCA = @ALLOCA@
 107 AMTAR = @AMTAR@
 108 AR = @AR@
 109 AUTOCONF = @AUTOCONF@
 110 AUTOHEADER = @AUTOHEADER@
 111 AUTOMAKE = @AUTOMAKE@
 112 AWK = @AWK@
 113 BUILD_DLLTOOL = @BUILD_DLLTOOL@
 114 BUILD_DLLWRAP = @BUILD_DLLWRAP@
 115 BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@
 116 BUILD_MISC = @BUILD_MISC@
 117 BUILD_NLMCONV = @BUILD_NLMCONV@
 118 BUILD_SRCONV = @BUILD_SRCONV@
 119 BUILD_WINDMC = @BUILD_WINDMC@
 120 BUILD_WINDRES = @BUILD_WINDRES@
 121 CATALOGS = @CATALOGS@
 122 CATOBJEXT = @CATOBJEXT@
 123 CC = @CC@
 124 CCDEPMODE = @CCDEPMODE@
 125 CC_FOR_BUILD = @CC_FOR_BUILD@
 126 CFLAGS = @CFLAGS@
 127 CPP = @CPP@
 128 CPPFLAGS = @CPPFLAGS@
 129 CYGPATH_W = @CYGPATH_W@
 130 DATADIRNAME = @DATADIRNAME@
 131 DEFS = @DEFS@
 132 DEMANGLER_NAME = @DEMANGLER_NAME@
 133 DEPDIR = @DEPDIR@
 134 DLLTOOL_DEFS = @DLLTOOL_DEFS@
 135 DSYMUTIL = @DSYMUTIL@
 136 DUMPBIN = @DUMPBIN@
 137 ECHO_C = @ECHO_C@
 138 ECHO_N = @ECHO_N@
 139 ECHO_T = @ECHO_T@
 140 EGREP = @EGREP@
 141 EMULATION = @EMULATION@
 142 EMULATION_VECTOR = @EMULATION_VECTOR@
 143 EXEEXT = @EXEEXT@
 144 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
 145 FGREP = @FGREP@
 146 GENCAT = @GENCAT@
 147 GMSGFMT = @GMSGFMT@
 148 GREP = @GREP@
 149 HDEFINES = @HDEFINES@
 150 INCINTL = @INCINTL@
 151 INSTALL = @INSTALL@
 152 INSTALL_DATA = @INSTALL_DATA@
 153 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 154 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 155 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 156 INSTOBJEXT = @INSTOBJEXT@
 157 LD = @LD@
 158 LDFLAGS = @LDFLAGS@
 159 LEX = @LEX@
 160 LEXLIB = @LEXLIB@
 161 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
 162 LIBICONV = @LIBICONV@
 163 LIBINTL = @LIBINTL@
 164 LIBINTL_DEP = @LIBINTL_DEP@
 165 LIBOBJS = @LIBOBJS@
 166 LIBS = @LIBS@
 167 LIBTOOL = @LIBTOOL@
 168 LIPO = @LIPO@
 169 LN_S = @LN_S@
 170 LTLIBICONV = @LTLIBICONV@
 171 LTLIBOBJS = @LTLIBOBJS@
 172 MAINT = @MAINT@
 173 MAKEINFO = @MAKEINFO@
 174 MKDIR_P = @MKDIR_P@
 175 MKINSTALLDIRS = @MKINSTALLDIRS@
 176 MSGFMT = @MSGFMT@
 177 MSGMERGE = @MSGMERGE@
 178 NLMCONV_DEFS = @NLMCONV_DEFS@
 179 NM = @NM@
 180 NMEDIT = @NMEDIT@
 181 NO_WERROR = @NO_WERROR@
 182 OBJDUMP = @OBJDUMP@
 183 OBJDUMP_DEFS = @OBJDUMP_DEFS@
 184 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
 185 OBJEXT = @OBJEXT@
 186 OTOOL = @OTOOL@
 187 OTOOL64 = @OTOOL64@
 188 PACKAGE = @PACKAGE@
 189 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 190 PACKAGE_NAME = @PACKAGE_NAME@
 191 PACKAGE_STRING = @PACKAGE_STRING@
 192 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 193 PACKAGE_URL = @PACKAGE_URL@
 194 PACKAGE_VERSION = @PACKAGE_VERSION@
 195 PATH_SEPARATOR = @PATH_SEPARATOR@
 196 POSUB = @POSUB@
 197 RANLIB = @RANLIB@
 198 SED = @SED@
 199 SET_MAKE = @SET_MAKE@
 200 SHELL = @SHELL@
 201 STRIP = @STRIP@
 202 USE_NLS = @USE_NLS@
 203 VERSION = @VERSION@
 204 WARN_CFLAGS = @WARN_CFLAGS@
 205 XGETTEXT = @XGETTEXT@
 206 YACC = @YACC@
 207 YFLAGS = @YFLAGS@
 208 abs_builddir = @abs_builddir@
 209 abs_srcdir = @abs_srcdir@
 210 abs_top_builddir = @abs_top_builddir@
 211 abs_top_srcdir = @abs_top_srcdir@
 212 ac_ct_CC = @ac_ct_CC@
 213 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 214 am__include = @am__include@
 215 am__leading_dot = @am__leading_dot@
 216 am__quote = @am__quote@
 217 am__tar = @am__tar@
 218 am__untar = @am__untar@
 219 bindir = @bindir@
 220 build = @build@
 221 build_alias = @build_alias@
 222 build_cpu = @build_cpu@
 223 build_os = @build_os@
 224 build_vendor = @build_vendor@
 225 builddir = @builddir@
 226 datadir = @datadir@
 227 datarootdir = @datarootdir@
 228 docdir = @docdir@
 229 dvidir = @dvidir@
 230 exec_prefix = @exec_prefix@
 231 host = @host@
 232 host_alias = @host_alias@
 233 host_cpu = @host_cpu@
 234 host_os = @host_os@
 235 host_vendor = @host_vendor@
 236 htmldir = @htmldir@
 237 includedir = @includedir@
 238 infodir = @infodir@
 239 install_sh = @install_sh@
 240 libdir = @libdir@
 241 libexecdir = @libexecdir@
 242 localedir = @localedir@
 243 localstatedir = @localstatedir@
 244 mandir = @mandir@
 245 mkdir_p = @mkdir_p@
 246 oldincludedir = @oldincludedir@
 247 pdfdir = @pdfdir@
 248 prefix = @prefix@
 249 program_transform_name = @program_transform_name@
 250 psdir = @psdir@
 251 sbindir = @sbindir@
 252 sharedstatedir = @sharedstatedir@
 253 srcdir = @srcdir@
 254 sysconfdir = @sysconfdir@
 255 target = @target@
 256 target_alias = @target_alias@
 257 target_cpu = @target_cpu@
 258 target_os = @target_os@
 259 target_vendor = @target_vendor@
 260 top_build_prefix = @top_build_prefix@
 261 top_builddir = @top_builddir@
 262 top_srcdir = @top_srcdir@
 263 AUTOMAKE_OPTIONS = cygnus
 264
 265 # What version of the manual you want; "all" includes everything
 266 CONFIG = all
 267
 268 # Options to extract the man page from as.texinfo
 269 MANCONF = -Dman
 270 TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
 271 POD2MAN = pod2man --center="GNU Development Tools" \
 272          --release="binutils-$(VERSION)" --section=1
 273
 274
 275 # List of man pages generated from binutils.texi
 276 man_MANS = \
 277         addr2line.1 \
 278         ar.1 \
 279         dlltool.1 \
 280         nlmconv.1 \
 281         nm.1 \
 282         objcopy.1 \
 283         objdump.1 \
 284         ranlib.1 \
 285         readelf.1 \
 286         size.1 \
 287         strings.1 \
 288         strip.1 \
 289         elfedit.1 \
 290         windres.1 \
 291         windmc.1 \
 292         $(DEMANGLER_NAME).1
 293
 294 info_TEXINFOS = binutils.texi
 295 binutils_TEXI = $(srcdir)/binutils.texi
 296 AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
 297                    -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
 298
 299 TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
 300                     -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
 301
 302 MOSTLYCLEANFILES = $(DEMANGLER_NAME).1
 303 MAINTAINERCLEANFILES = binutils.info
 304
 305 # Automake 1.9 will only build info files in the objdir if they are
 306 # mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
 307 # though, so we use a bogus condition.
 308 @GENINSRC_NEVER_TRUE@DISTCLEANFILES = binutils.info
 309 all: all-am
 310
 311 .SUFFIXES:
 312 .SUFFIXES: .dvi .ps
 313 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 314         @for dep in $?; do \
 315           case '$(am__configure_deps)' in \
 316             *$$dep*) \
 317               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 318                 && { if test -f $@; then exit 0; else break; fi; }; \
 319               exit 1;; \
 320           esac; \
 321         done; \
 322         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
 323         $(am__cd) $(top_srcdir) && \
 324           $(AUTOMAKE) --foreign doc/Makefile
 325 .PRECIOUS: Makefile
 326 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 327         @case '$?' in \
 328           *config.status*) \
 329             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 330           *) \
 331             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 332             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 333         esac;
 334
 335 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 336         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 337
 338 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 339         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 340 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 341         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 342 $(am__aclocal_m4_deps):
 343
 344 mostlyclean-libtool:
 345         -rm -f *.lo
 346
 347 clean-libtool:
 348         -rm -rf .libs _libs
 349
 350 binutils.info: binutils.texi
 351         restore=: && backupdir="$(am__leading_dot)am$$$$" && \
 352         rm -rf $$backupdir && mkdir $$backupdir && \
 353         if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
 354           for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
 355             if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
 356           done; \
 357         else :; fi && \
 358         if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
 359          -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
 360         then \
 361           rc=0; \
 362         else \
 363           rc=$$?; \
 364           $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
 365         fi; \
 366         rm -rf $$backupdir; exit $$rc
 367
 368 binutils.dvi: binutils.texi
 369         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 370         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 371         $(TEXI2DVI) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
 372
 373 binutils.pdf: binutils.texi
 374         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 375         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 376         $(TEXI2PDF) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
 377
 378 binutils.html: binutils.texi
 379         rm -rf $(@:.html=.htp)
 380         if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
 381          -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
 382         then \
 383           rm -rf $@; \
 384           if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
 385             mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
 386         else \
 387           if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
 388             rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
 389           exit 1; \
 390         fi
 391 .dvi.ps:
 392         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 393         $(DVIPS) -o $@ $<
 394
 395 uninstall-dvi-am:
 396         @$(NORMAL_UNINSTALL)
 397         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 398         for p in $$list; do \
 399           $(am__strip_dir) \
 400           echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
 401           rm -f "$(DESTDIR)$(dvidir)/$$f"; \
 402         done
 403
 404 uninstall-html-am:
 405         @$(NORMAL_UNINSTALL)
 406         @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
 407         for p in $$list; do \
 408           $(am__strip_dir) \
 409           echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
 410           rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
 411         done
 412
 413 uninstall-info-am:
 414         @$(PRE_UNINSTALL)
 415         @if test -d '$(DESTDIR)$(infodir)' && \
 416             (install-info --version && \
 417              install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 418           list='$(INFO_DEPS)'; \
 419           for file in $$list; do \
 420             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 421             echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
 422             if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
 423             then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
 424           done; \
 425         else :; fi
 426         @$(NORMAL_UNINSTALL)
 427         @list='$(INFO_DEPS)'; \
 428         for file in $$list; do \
 429           relfile=`echo "$$file" | sed 's|^.*/||'`; \
 430           relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
 431           (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
 432              echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
 433              rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
 434            else :; fi); \
 435         done
 436
 437 uninstall-pdf-am:
 438         @$(NORMAL_UNINSTALL)
 439         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 440         for p in $$list; do \
 441           $(am__strip_dir) \
 442           echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
 443           rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
 444         done
 445
 446 uninstall-ps-am:
 447         @$(NORMAL_UNINSTALL)
 448         @list='$(PSS)'; test -n "$(psdir)" || list=; \
 449         for p in $$list; do \
 450           $(am__strip_dir) \
 451           echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
 452           rm -f "$(DESTDIR)$(psdir)/$$f"; \
 453         done
 454
 455 dist-info: $(INFO_DEPS)
 456         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 457         list='$(INFO_DEPS)'; \
 458         for base in $$list; do \
 459           case $$base in \
 460             $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
 461           esac; \
 462           if test -f $$base; then d=.; else d=$(srcdir); fi; \
 463           base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
 464           for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
 465             if test -f $$file; then \
 466               relfile=`expr "$$file" : "$$d/\(.*\)"`; \
 467               test -f "$(distdir)/$$relfile" || \
 468                 cp -p $$file "$(distdir)/$$relfile"; \
 469             else :; fi; \
 470           done; \
 471         done
 472
 473 mostlyclean-aminfo:
 474         -rm -rf binutils.aux binutils.cp binutils.cps binutils.fn binutils.fns \
 475           binutils.ky binutils.log binutils.pg binutils.pgs \
 476           binutils.tmp binutils.toc binutils.tp binutils.tps \
 477           binutils.vr binutils.vrs
 478
 479 clean-aminfo:
 480         -test -z "binutils.dvi binutils.pdf binutils.ps binutils.html" \
 481         || rm -rf binutils.dvi binutils.pdf binutils.ps binutils.html
 482
 483 maintainer-clean-aminfo:
 484         @list='$(INFO_DEPS)'; for i in $$list; do \
 485           i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
 486           echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
 487           rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
 488         done
 489
 490 clean-info: mostlyclean-aminfo clean-aminfo
 491 install-man1: $(man_MANS)
 492         @$(NORMAL_INSTALL)
 493         test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
 494         @list=''; test -n "$(man1dir)" || exit 0; \
 495         { for i in $$list; do echo "$$i"; done; \
 496         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 497           sed -n '/\.1[a-z]*$$/p'; \
 498         } | while read p; do \
 499           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 500           echo "$$d$$p"; echo "$$p"; \
 501         done | \
 502         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 503               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 504         sed 'N;N;s,\n, ,g' | { \
 505         list=; while read file base inst; do \
 506           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 507             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
 508             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
 509           fi; \
 510         done; \
 511         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 512         while read files; do \
 513           test -z "$$files" || { \
 514             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
 515             $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
 516         done; }
 517
 518 uninstall-man1:
 519         @$(NORMAL_UNINSTALL)
 520         @list=''; test -n "$(man1dir)" || exit 0; \
 521         files=`{ for i in $$list; do echo "$$i"; done; \
 522         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 523           sed -n '/\.1[a-z]*$$/p'; \
 524         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 525               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 526         test -z "$$files" || { \
 527           echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
 528           cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
 529 tags: TAGS
 530 TAGS:
 531
 532 ctags: CTAGS
 533 CTAGS:
 534
 535 check-am:
 536 check: check-am
 537 all-am: Makefile $(MANS)
 538 installdirs:
 539         for dir in "$(DESTDIR)$(man1dir)"; do \
 540           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 541         done
 542 install: install-am
 543 install-exec: install-exec-am
 544 install-data: install-data-am
 545 uninstall: uninstall-am
 546
 547 install-am: all-am
 548         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 549
 550 installcheck: installcheck-am
 551 install-strip:
 552         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 553           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 554           `test -z '$(STRIP)' || \
 555             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 556 mostlyclean-generic:
 557         -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
 558
 559 clean-generic:
 560
 561 distclean-generic:
 562         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 563         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 564         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 565
 566 maintainer-clean-generic:
 567         @echo "This command is intended for maintainers to use"
 568         @echo "it deletes files that may require special tools to rebuild."
 569         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 570 clean: clean-am
 571
 572 clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
 573
 574 distclean: distclean-am
 575         -rm -f Makefile
 576 distclean-am: clean-am distclean-generic
 577
 578 dvi: dvi-am
 579
 580 dvi-am: $(DVIS)
 581
 582 html: html-am
 583
 584 html-am: $(HTMLS)
 585
 586 info: info-am
 587
 588 info-am: $(INFO_DEPS) info-local
 589
 590 install-data-am: install-data-local install-man
 591
 592 install-dvi: install-dvi-am
 593
 594 install-dvi-am: $(DVIS)
 595         @$(NORMAL_INSTALL)
 596         test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
 597         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 598         for p in $$list; do \
 599           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 600           echo "$$d$$p"; \
 601         done | $(am__base_list) | \
 602         while read files; do \
 603           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
 604           $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
 605         done
 606 install-exec-am:
 607
 608 install-html: install-html-am
 609
 610 install-html-am: $(HTMLS)
 611         @$(NORMAL_INSTALL)
 612         test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
 613         @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
 614         for p in $$list; do \
 615           if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
 616           $(am__strip_dir) \
 617           if test -d "$$d$$p"; then \
 618             echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
 619             $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
 620             echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
 621             $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
 622           else \
 623             list2="$$list2 $$d$$p"; \
 624           fi; \
 625         done; \
 626         test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
 627         while read files; do \
 628           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
 629           $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
 630         done; }
 631 install-info: install-info-am
 632
 633 install-info-am: $(INFO_DEPS)
 634         @$(NORMAL_INSTALL)
 635         test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
 636         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 637         list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 638         for file in $$list; do \
 639           case $$file in \
 640             $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
 641           esac; \
 642           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 643           file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
 644           for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
 645                        $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
 646             if test -f $$ifile; then \
 647               echo "$$ifile"; \
 648             else : ; fi; \
 649           done; \
 650         done | $(am__base_list) | \
 651         while read files; do \
 652           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
 653           $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
 654         @$(POST_INSTALL)
 655         @if (install-info --version && \
 656              install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 657           list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 658           for file in $$list; do \
 659             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 660             echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
 661             install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
 662           done; \
 663         else : ; fi
 664 install-man: install-man1
 665
 666 install-pdf: install-pdf-am
 667
 668 install-pdf-am: $(PDFS)
 669         @$(NORMAL_INSTALL)
 670         test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
 671         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 672         for p in $$list; do \
 673           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 674           echo "$$d$$p"; \
 675         done | $(am__base_list) | \
 676         while read files; do \
 677           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
 678           $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 679 install-ps: install-ps-am
 680
 681 install-ps-am: $(PSS)
 682         @$(NORMAL_INSTALL)
 683         test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
 684         @list='$(PSS)'; test -n "$(psdir)" || list=; \
 685         for p in $$list; do \
 686           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 687           echo "$$d$$p"; \
 688         done | $(am__base_list) | \
 689         while read files; do \
 690           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
 691           $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
 692 installcheck-am:
 693
 694 maintainer-clean: maintainer-clean-am
 695         -rm -f Makefile
 696 maintainer-clean-am: distclean-am maintainer-clean-aminfo \
 697         maintainer-clean-generic
 698
 699 mostlyclean: mostlyclean-am
 700
 701 mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
 702         mostlyclean-libtool
 703
 704 pdf: pdf-am
 705
 706 pdf-am: $(PDFS)
 707
 708 ps: ps-am
 709
 710 ps-am: $(PSS)
 711
 712 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
 713         uninstall-man uninstall-pdf-am uninstall-ps-am
 714
 715 uninstall-man: uninstall-man1
 716
 717 .MAKE: install-am install-strip
 718
 719 .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
 720         clean-info clean-libtool dist-info distclean distclean-generic \
 721         distclean-libtool dvi dvi-am html html-am info info-am \
 722         info-local install install-am install-data install-data-am \
 723         install-data-local install-dvi install-dvi-am install-exec \
 724         install-exec-am install-html install-html-am install-info \
 725         install-info-am install-man install-man1 install-pdf \
 726         install-pdf-am install-ps install-ps-am install-strip \
 727         installcheck installcheck-am installdirs maintainer-clean \
 728         maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
 729         mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \
 730         pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
 731         uninstall-html-am uninstall-info-am uninstall-man \
 732         uninstall-man1 uninstall-pdf-am uninstall-ps-am
 733
 734
 735 # Man page generation from texinfo
 736 addr2line.1:    $(binutils_TEXI) $(binutils_TEXINFOS)
 737         touch $@
 738         -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
 739         -($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 740                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 741         rm -f addr2line.pod
 742
 743 ar.1:   $(binutils_TEXI) $(binutils_TEXINFOS)
 744         touch $@
 745         -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
 746         -($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 747                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 748         rm -f ar.pod
 749
 750 dlltool.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 751         touch $@
 752         -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
 753         -($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 754                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 755         rm -f dlltool.pod
 756
 757 nlmconv.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 758         touch $@
 759         -$(TEXI2POD) $(MANCONF) -Dnlmconv < $(binutils_TEXI) > nlmconv.pod
 760         -($(POD2MAN) nlmconv.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 761                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 762         rm -f nlmconv.pod
 763
 764 nm.1:   $(binutils_TEXI) $(binutils_TEXINFOS)
 765         touch $@
 766         -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
 767         -($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 768                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 769         rm -f nm.pod
 770
 771 objcopy.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 772         touch $@
 773         -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
 774         -($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 775                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 776         rm -f objcopy.pod
 777
 778 objdump.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 779         touch $@
 780         -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
 781         -($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 782                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 783         rm -f objdump.pod
 784
 785 ranlib.1:       $(binutils_TEXI) $(binutils_TEXINFOS)
 786         touch $@
 787         -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
 788         -($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 789                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 790         rm -f ranlib.pod
 791
 792 readelf.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 793         touch $@
 794         -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
 795         -($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 796                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 797         rm -f readelf.pod
 798
 799 size.1: $(binutils_TEXI) $(binutils_TEXINFOS)
 800         touch $@
 801         -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
 802         -($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 803                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 804         rm -f size.pod
 805
 806 strings.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 807         touch $@
 808         -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
 809         -($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 810                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 811         rm -f strings.pod
 812
 813 strip.1:        $(binutils_TEXI) $(binutils_TEXINFOS)
 814         touch $@
 815         -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
 816         -($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 817                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 818         rm -f strip.pod
 819
 820 elfedit.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 821         touch $@
 822         -$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
 823         -($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 824                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 825         rm -f elfedit.pod
 826
 827 windres.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 828         touch $@
 829         -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
 830         -($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 831                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 832         rm -f windres.pod
 833
 834 windmc.1:       $(binutils_TEXI) $(binutils_TEXINFOS)
 835         touch $@
 836         -$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
 837         -($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 838                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 839         rm -f windmc.pod
 840
 841 cxxfilt.man:    $(binutils_TEXI) $(binutils_TEXINFOS)
 842         touch $@
 843         -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
 844         -($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 845                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 846         rm -f $(DEMANGLER_NAME).pod
 847
 848 $(DEMANGLER_NAME).1: cxxfilt.man Makefile
 849         if test -f cxxfilt.man; then \
 850           man=cxxfilt.man; \
 851         else \
 852           man=$(srcdir)/cxxfilt.man; \
 853         fi; \
 854         sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
 855             -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
 856                 > $(DEMANGLER_NAME).1
 857
 858 # We want install to imply install-info as per GNU standards, despite the
 859 # cygnus option.
 860 install-data-local: install-info
 861
 862 # Maintenance
 863
 864 # We need it for the taz target in ../../Makefile.in.
 865 info-local: $(MANS)
 866
 867 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 868 # Otherwise a system limit (for SysV at least) may be exceeded.
 869 .NOEXPORT: