bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001, 2002, 2003, 2004, 2005, 2006
   4    Free Software Foundation, Inc.
   5    Written by Cygnus Support.
   6
   7    This file is part of BFD, the Binary File Descriptor library.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 2 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program; if not, write to the Free Software
  21    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
  22
  23 /*
  24 SECTION
  25         Relocations
  26
  27         BFD maintains relocations in much the same way it maintains
  28         symbols: they are left alone until required, then read in
  29         en-masse and translated into an internal form.  A common
  30         routine <<bfd_perform_relocation>> acts upon the
  31         canonical form to do the fixup.
  32
  33         Relocations are maintained on a per section basis,
  34         while symbols are maintained on a per BFD basis.
  35
  36         All that a back end has to do to fit the BFD interface is to create
  37         a <<struct reloc_cache_entry>> for each relocation
  38         in a particular section, and fill in the right bits of the structures.
  39
  40 @menu
  41 @* typedef arelent::
  42 @* howto manager::
  43 @end menu
  44
  45 */
  46
  47 /* DO compile in the reloc_code name table from libbfd.h.  */
  48 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  49
  50 #include "bfd.h"
  51 #include "sysdep.h"
  52 #include "bfdlink.h"
  53 #include "libbfd.h"
  54 /*
  55 DOCDD
  56 INODE
  57         typedef arelent, howto manager, Relocations, Relocations
  58
  59 SUBSECTION
  60         typedef arelent
  61
  62         This is the structure of a relocation entry:
  63
  64 CODE_FRAGMENT
  65 .
  66 .typedef enum bfd_reloc_status
  67 .{
  68 .  {* No errors detected.  *}
  69 .  bfd_reloc_ok,
  70 .
  71 .  {* The relocation was performed, but there was an overflow.  *}
  72 .  bfd_reloc_overflow,
  73 .
  74 .  {* The address to relocate was not within the section supplied.  *}
  75 .  bfd_reloc_outofrange,
  76 .
  77 .  {* Used by special functions.  *}
  78 .  bfd_reloc_continue,
  79 .
  80 .  {* Unsupported relocation size requested.  *}
  81 .  bfd_reloc_notsupported,
  82 .
  83 .  {* Unused.  *}
  84 .  bfd_reloc_other,
  85 .
  86 .  {* The symbol to relocate against was undefined.  *}
  87 .  bfd_reloc_undefined,
  88 .
  89 .  {* The relocation was performed, but may not be ok - presently
  90 .     generated only when linking i960 coff files with i960 b.out
  91 .     symbols.  If this type is returned, the error_message argument
  92 .     to bfd_perform_relocation will be set.  *}
  93 .  bfd_reloc_dangerous
  94 . }
  95 . bfd_reloc_status_type;
  96 .
  97 .
  98 .typedef struct reloc_cache_entry
  99 .{
 100 .  {* A pointer into the canonical table of pointers.  *}
 101 .  struct bfd_symbol **sym_ptr_ptr;
 102 .
 103 .  {* offset in section.  *}
 104 .  bfd_size_type address;
 105 .
 106 .  {* addend for relocation value.  *}
 107 .  bfd_vma addend;
 108 .
 109 .  {* Pointer to how to perform the required relocation.  *}
 110 .  reloc_howto_type *howto;
 111 .
 112 .}
 113 .arelent;
 114 .
 115 */
 116
 117 /*
 118 DESCRIPTION
 119
 120         Here is a description of each of the fields within an <<arelent>>:
 121
 122         o <<sym_ptr_ptr>>
 123
 124         The symbol table pointer points to a pointer to the symbol
 125         associated with the relocation request.  It is the pointer
 126         into the table returned by the back end's
 127         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 128         referenced through a pointer to a pointer so that tools like
 129         the linker can fix up all the symbols of the same name by
 130         modifying only one pointer. The relocation routine looks in
 131         the symbol and uses the base of the section the symbol is
 132         attached to and the value of the symbol as the initial
 133         relocation offset. If the symbol pointer is zero, then the
 134         section provided is looked up.
 135
 136         o <<address>>
 137
 138         The <<address>> field gives the offset in bytes from the base of
 139         the section data which owns the relocation record to the first
 140         byte of relocatable information. The actual data relocated
 141         will be relative to this point; for example, a relocation
 142         type which modifies the bottom two bytes of a four byte word
 143         would not touch the first byte pointed to in a big endian
 144         world.
 145
 146         o <<addend>>
 147
 148         The <<addend>> is a value provided by the back end to be added (!)
 149         to the relocation offset. Its interpretation is dependent upon
 150         the howto. For example, on the 68k the code:
 151
 152 |        char foo[];
 153 |        main()
 154 |                {
 155 |                return foo[0x12345678];
 156 |                }
 157
 158         Could be compiled into:
 159
 160 |        linkw fp,#-4
 161 |        moveb @@#12345678,d0
 162 |        extbl d0
 163 |        unlk fp
 164 |        rts
 165
 166         This could create a reloc pointing to <<foo>>, but leave the
 167         offset in the data, something like:
 168
 169 |RELOCATION RECORDS FOR [.text]:
 170 |offset   type      value
 171 |00000006 32        _foo
 172 |
 173 |00000000 4e56 fffc          ; linkw fp,#-4
 174 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 175 |0000000a 49c0               ; extbl d0
 176 |0000000c 4e5e               ; unlk fp
 177 |0000000e 4e75               ; rts
 178
 179         Using coff and an 88k, some instructions don't have enough
 180         space in them to represent the full address range, and
 181         pointers have to be loaded in two parts. So you'd get something like:
 182
 183 |        or.u     r13,r0,hi16(_foo+0x12345678)
 184 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 185 |        jmp      r1
 186
 187         This should create two relocs, both pointing to <<_foo>>, and with
 188         0x12340000 in their addend field. The data would consist of:
 189
 190 |RELOCATION RECORDS FOR [.text]:
 191 |offset   type      value
 192 |00000002 HVRT16    _foo+0x12340000
 193 |00000006 LVRT16    _foo+0x12340000
 194 |
 195 |00000000 5da05678           ; or.u r13,r0,0x5678
 196 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 197 |00000008 f400c001           ; jmp r1
 198
 199         The relocation routine digs out the value from the data, adds
 200         it to the addend to get the original offset, and then adds the
 201         value of <<_foo>>. Note that all 32 bits have to be kept around
 202         somewhere, to cope with carry from bit 15 to bit 16.
 203
 204         One further example is the sparc and the a.out format. The
 205         sparc has a similar problem to the 88k, in that some
 206         instructions don't have room for an entire offset, but on the
 207         sparc the parts are created in odd sized lumps. The designers of
 208         the a.out format chose to not use the data within the section
 209         for storing part of the offset; all the offset is kept within
 210         the reloc. Anything in the data should be ignored.
 211
 212 |        save %sp,-112,%sp
 213 |        sethi %hi(_foo+0x12345678),%g2
 214 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 215 |        ret
 216 |        restore
 217
 218         Both relocs contain a pointer to <<foo>>, and the offsets
 219         contain junk.
 220
 221 |RELOCATION RECORDS FOR [.text]:
 222 |offset   type      value
 223 |00000004 HI22      _foo+0x12345678
 224 |00000008 LO10      _foo+0x12345678
 225 |
 226 |00000000 9de3bf90     ; save %sp,-112,%sp
 227 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 228 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 229 |0000000c 81c7e008     ; ret
 230 |00000010 81e80000     ; restore
 231
 232         o <<howto>>
 233
 234         The <<howto>> field can be imagined as a
 235         relocation instruction. It is a pointer to a structure which
 236         contains information on what to do with all of the other
 237         information in the reloc record and data section. A back end
 238         would normally have a relocation instruction set and turn
 239         relocations into pointers to the correct structure on input -
 240         but it would be possible to create each howto field on demand.
 241
 242 */
 243
 244 /*
 245 SUBSUBSECTION
 246         <<enum complain_overflow>>
 247
 248         Indicates what sort of overflow checking should be done when
 249         performing a relocation.
 250
 251 CODE_FRAGMENT
 252 .
 253 .enum complain_overflow
 254 .{
 255 .  {* Do not complain on overflow.  *}
 256 .  complain_overflow_dont,
 257 .
 258 .  {* Complain if the value overflows when considered as a signed
 259 .     number one bit larger than the field.  ie. A bitfield of N bits
 260 .     is allowed to represent -2**n to 2**n-1.  *}
 261 .  complain_overflow_bitfield,
 262 .
 263 .  {* Complain if the value overflows when considered as a signed
 264 .     number.  *}
 265 .  complain_overflow_signed,
 266 .
 267 .  {* Complain if the value overflows when considered as an
 268 .     unsigned number.  *}
 269 .  complain_overflow_unsigned
 270 .};
 271
 272 */
 273
 274 /*
 275 SUBSUBSECTION
 276         <<reloc_howto_type>>
 277
 278         The <<reloc_howto_type>> is a structure which contains all the
 279         information that libbfd needs to know to tie up a back end's data.
 280
 281 CODE_FRAGMENT
 282 .struct bfd_symbol;             {* Forward declaration.  *}
 283 .
 284 .struct reloc_howto_struct
 285 .{
 286 .  {*  The type field has mainly a documentary use - the back end can
 287 .      do what it wants with it, though normally the back end's
 288 .      external idea of what a reloc number is stored
 289 .      in this field.  For example, a PC relative word relocation
 290 .      in a coff environment has the type 023 - because that's
 291 .      what the outside world calls a R_PCRWORD reloc.  *}
 292 .  unsigned int type;
 293 .
 294 .  {*  The value the final relocation is shifted right by.  This drops
 295 .      unwanted data from the relocation.  *}
 296 .  unsigned int rightshift;
 297 .
 298 .  {*  The size of the item to be relocated.  This is *not* a
 299 .      power-of-two measure.  To get the number of bytes operated
 300 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 301 .  int size;
 302 .
 303 .  {*  The number of bits in the item to be relocated.  This is used
 304 .      when doing overflow checking.  *}
 305 .  unsigned int bitsize;
 306 .
 307 .  {*  Notes that the relocation is relative to the location in the
 308 .      data section of the addend.  The relocation function will
 309 .      subtract from the relocation value the address of the location
 310 .      being relocated.  *}
 311 .  bfd_boolean pc_relative;
 312 .
 313 .  {*  The bit position of the reloc value in the destination.
 314 .      The relocated value is left shifted by this amount.  *}
 315 .  unsigned int bitpos;
 316 .
 317 .  {* What type of overflow error should be checked for when
 318 .     relocating.  *}
 319 .  enum complain_overflow complain_on_overflow;
 320 .
 321 .  {* If this field is non null, then the supplied function is
 322 .     called rather than the normal function.  This allows really
 323 .     strange relocation methods to be accommodated (e.g., i960 callj
 324 .     instructions).  *}
 325 .  bfd_reloc_status_type (*special_function)
 326 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 327 .     bfd *, char **);
 328 .
 329 .  {* The textual name of the relocation type.  *}
 330 .  char *name;
 331 .
 332 .  {* Some formats record a relocation addend in the section contents
 333 .     rather than with the relocation.  For ELF formats this is the
 334 .     distinction between USE_REL and USE_RELA (though the code checks
 335 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 336 .     addend is recorded with the section contents; when performing a
 337 .     partial link (ld -r) the section contents (the data) will be
 338 .     modified.  The value of this field is FALSE if addends are
 339 .     recorded with the relocation (in arelent.addend); when performing
 340 .     a partial link the relocation will be modified.
 341 .     All relocations for all ELF USE_RELA targets should set this field
 342 .     to FALSE (values of TRUE should be looked on with suspicion).
 343 .     However, the converse is not true: not all relocations of all ELF
 344 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 345 .     to each particular target.  For relocs that aren't used in partial
 346 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 347 .  bfd_boolean partial_inplace;
 348 .
 349 .  {* src_mask selects the part of the instruction (or data) to be used
 350 .     in the relocation sum.  If the target relocations don't have an
 351 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 352 .     dst_mask to extract the addend from the section contents.  If
 353 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 354 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 355 .     bogus as in those cases the value in the dst_mask part of the
 356 .     section contents should be treated as garbage.  *}
 357 .  bfd_vma src_mask;
 358 .
 359 .  {* dst_mask selects which parts of the instruction (or data) are
 360 .     replaced with a relocated value.  *}
 361 .  bfd_vma dst_mask;
 362 .
 363 .  {* When some formats create PC relative instructions, they leave
 364 .     the value of the pc of the place being relocated in the offset
 365 .     slot of the instruction, so that a PC relative relocation can
 366 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 367 .     Some formats leave the displacement part of an instruction
 368 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 369 .  bfd_boolean pcrel_offset;
 370 .};
 371 .
 372 */
 373
 374 /*
 375 FUNCTION
 376         The HOWTO Macro
 377
 378 DESCRIPTION
 379         The HOWTO define is horrible and will go away.
 380
 381 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 382 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 383
 384 DESCRIPTION
 385         And will be replaced with the totally magic way. But for the
 386         moment, we are compatible, so do it this way.
 387
 388 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 389 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 390 .         NAME, FALSE, 0, 0, IN)
 391 .
 392
 393 DESCRIPTION
 394         This is used to fill in an empty howto entry in an array.
 395
 396 .#define EMPTY_HOWTO(C) \
 397 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 398 .         NULL, FALSE, 0, 0, FALSE)
 399 .
 400
 401 DESCRIPTION
 402         Helper routine to turn a symbol into a relocation value.
 403
 404 .#define HOWTO_PREPARE(relocation, symbol)               \
 405 .  {                                                     \
 406 .    if (symbol != NULL)                                 \
 407 .      {                                                 \
 408 .        if (bfd_is_com_section (symbol->section))       \
 409 .          {                                             \
 410 .            relocation = 0;                             \
 411 .          }                                             \
 412 .        else                                            \
 413 .          {                                             \
 414 .            relocation = symbol->value;                 \
 415 .          }                                             \
 416 .      }                                                 \
 417 .  }
 418 .
 419 */
 420
 421 /*
 422 FUNCTION
 423         bfd_get_reloc_size
 424
 425 SYNOPSIS
 426         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 427
 428 DESCRIPTION
 429         For a reloc_howto_type that operates on a fixed number of bytes,
 430         this returns the number of bytes operated on.
 431  */
 432
 433 unsigned int
 434 bfd_get_reloc_size (reloc_howto_type *howto)
 435 {
 436   switch (howto->size)
 437     {
 438     case 0: return 1;
 439     case 1: return 2;
 440     case 2: return 4;
 441     case 3: return 0;
 442     case 4: return 8;
 443     case 8: return 16;
 444     case -2: return 4;
 445     default: abort ();
 446     }
 447 }
 448
 449 /*
 450 TYPEDEF
 451         arelent_chain
 452
 453 DESCRIPTION
 454
 455         How relocs are tied together in an <<asection>>:
 456
 457 .typedef struct relent_chain
 458 .{
 459 .  arelent relent;
 460 .  struct relent_chain *next;
 461 .}
 462 .arelent_chain;
 463 .
 464 */
 465
 466 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 467 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 468
 469 /*
 470 FUNCTION
 471         bfd_check_overflow
 472
 473 SYNOPSIS
 474         bfd_reloc_status_type bfd_check_overflow
 475           (enum complain_overflow how,
 476            unsigned int bitsize,
 477            unsigned int rightshift,
 478            unsigned int addrsize,
 479            bfd_vma relocation);
 480
 481 DESCRIPTION
 482         Perform overflow checking on @var{relocation} which has
 483         @var{bitsize} significant bits and will be shifted right by
 484         @var{rightshift} bits, on a machine with addresses containing
 485         @var{addrsize} significant bits.  The result is either of
 486         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 487
 488 */
 489
 490 bfd_reloc_status_type
 491 bfd_check_overflow (enum complain_overflow how,
 492                     unsigned int bitsize,
 493                     unsigned int rightshift,
 494                     unsigned int addrsize,
 495                     bfd_vma relocation)
 496 {
 497   bfd_vma fieldmask, addrmask, signmask, ss, a;
 498   bfd_reloc_status_type flag = bfd_reloc_ok;
 499
 500   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 501      we'll be permissive: extra bits in the field mask will
 502      automatically extend the address mask for purposes of the
 503      overflow check.  */
 504   fieldmask = N_ONES (bitsize);
 505   signmask = ~fieldmask;
 506   addrmask = N_ONES (addrsize) | fieldmask;
 507   a = (relocation & addrmask) >> rightshift;;
 508
 509   switch (how)
 510     {
 511     case complain_overflow_dont:
 512       break;
 513
 514     case complain_overflow_signed:
 515       /* If any sign bits are set, all sign bits must be set.  That
 516          is, A must be a valid negative address after shifting.  */
 517       signmask = ~ (fieldmask >> 1);
 518       /* Fall thru */
 519
 520     case complain_overflow_bitfield:
 521       /* Bitfields are sometimes signed, sometimes unsigned.  We
 522          explicitly allow an address wrap too, which means a bitfield
 523          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 524          if the value has some, but not all, bits set outside the
 525          field.  */
 526       ss = a & signmask;
 527       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 528         flag = bfd_reloc_overflow;
 529       break;
 530
 531     case complain_overflow_unsigned:
 532       /* We have an overflow if the address does not fit in the field.  */
 533       if ((a & signmask) != 0)
 534         flag = bfd_reloc_overflow;
 535       break;
 536
 537     default:
 538       abort ();
 539     }
 540
 541   return flag;
 542 }
 543
 544 /*
 545 FUNCTION
 546         bfd_perform_relocation
 547
 548 SYNOPSIS
 549         bfd_reloc_status_type bfd_perform_relocation
 550           (bfd *abfd,
 551            arelent *reloc_entry,
 552            void *data,
 553            asection *input_section,
 554            bfd *output_bfd,
 555            char **error_message);
 556
 557 DESCRIPTION
 558         If @var{output_bfd} is supplied to this function, the
 559         generated image will be relocatable; the relocations are
 560         copied to the output file after they have been changed to
 561         reflect the new state of the world. There are two ways of
 562         reflecting the results of partial linkage in an output file:
 563         by modifying the output data in place, and by modifying the
 564         relocation record.  Some native formats (e.g., basic a.out and
 565         basic coff) have no way of specifying an addend in the
 566         relocation type, so the addend has to go in the output data.
 567         This is no big deal since in these formats the output data
 568         slot will always be big enough for the addend. Complex reloc
 569         types with addends were invented to solve just this problem.
 570         The @var{error_message} argument is set to an error message if
 571         this return @code{bfd_reloc_dangerous}.
 572
 573 */
 574
 575 bfd_reloc_status_type
 576 bfd_perform_relocation (bfd *abfd,
 577                         arelent *reloc_entry,
 578                         void *data,
 579                         asection *input_section,
 580                         bfd *output_bfd,
 581                         char **error_message)
 582 {
 583   bfd_vma relocation;
 584   bfd_reloc_status_type flag = bfd_reloc_ok;
 585   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 586   bfd_vma output_base = 0;
 587   reloc_howto_type *howto = reloc_entry->howto;
 588   asection *reloc_target_output_section;
 589   asymbol *symbol;
 590
 591   symbol = *(reloc_entry->sym_ptr_ptr);
 592   if (bfd_is_abs_section (symbol->section)
 593       && output_bfd != NULL)
 594     {
 595       reloc_entry->address += input_section->output_offset;
 596       return bfd_reloc_ok;
 597     }
 598
 599   /* If we are not producing relocatable output, return an error if
 600      the symbol is not defined.  An undefined weak symbol is
 601      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 602   if (bfd_is_und_section (symbol->section)
 603       && (symbol->flags & BSF_WEAK) == 0
 604       && output_bfd == NULL)
 605     flag = bfd_reloc_undefined;
 606
 607   /* If there is a function supplied to handle this relocation type,
 608      call it.  It'll return `bfd_reloc_continue' if further processing
 609      can be done.  */
 610   if (howto->special_function)
 611     {
 612       bfd_reloc_status_type cont;
 613       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 614                                       input_section, output_bfd,
 615                                       error_message);
 616       if (cont != bfd_reloc_continue)
 617         return cont;
 618     }
 619
 620   /* Is the address of the relocation really within the section?  */
 621   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 622     return bfd_reloc_outofrange;
 623
 624   /* Work out which section the relocation is targeted at and the
 625      initial relocation command value.  */
 626
 627   /* Get symbol value.  (Common symbols are special.)  */
 628   if (bfd_is_com_section (symbol->section))
 629     relocation = 0;
 630   else
 631     relocation = symbol->value;
 632
 633   reloc_target_output_section = symbol->section->output_section;
 634
 635   /* Convert input-section-relative symbol value to absolute.  */
 636   if ((output_bfd && ! howto->partial_inplace)
 637       || reloc_target_output_section == NULL)
 638     output_base = 0;
 639   else
 640     output_base = reloc_target_output_section->vma;
 641
 642   relocation += output_base + symbol->section->output_offset;
 643
 644   /* Add in supplied addend.  */
 645   relocation += reloc_entry->addend;
 646
 647   /* Here the variable relocation holds the final address of the
 648      symbol we are relocating against, plus any addend.  */
 649
 650   if (howto->pc_relative)
 651     {
 652       /* This is a PC relative relocation.  We want to set RELOCATION
 653          to the distance between the address of the symbol and the
 654          location.  RELOCATION is already the address of the symbol.
 655
 656          We start by subtracting the address of the section containing
 657          the location.
 658
 659          If pcrel_offset is set, we must further subtract the position
 660          of the location within the section.  Some targets arrange for
 661          the addend to be the negative of the position of the location
 662          within the section; for example, i386-aout does this.  For
 663          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 664          include the position of the location; for example, m88kbcs,
 665          or ELF.  For those targets, pcrel_offset is TRUE.
 666
 667          If we are producing relocatable output, then we must ensure
 668          that this reloc will be correctly computed when the final
 669          relocation is done.  If pcrel_offset is FALSE we want to wind
 670          up with the negative of the location within the section,
 671          which means we must adjust the existing addend by the change
 672          in the location within the section.  If pcrel_offset is TRUE
 673          we do not want to adjust the existing addend at all.
 674
 675          FIXME: This seems logical to me, but for the case of
 676          producing relocatable output it is not what the code
 677          actually does.  I don't want to change it, because it seems
 678          far too likely that something will break.  */
 679
 680       relocation -=
 681         input_section->output_section->vma + input_section->output_offset;
 682
 683       if (howto->pcrel_offset)
 684         relocation -= reloc_entry->address;
 685     }
 686
 687   if (output_bfd != NULL)
 688     {
 689       if (! howto->partial_inplace)
 690         {
 691           /* This is a partial relocation, and we want to apply the relocation
 692              to the reloc entry rather than the raw data. Modify the reloc
 693              inplace to reflect what we now know.  */
 694           reloc_entry->addend = relocation;
 695           reloc_entry->address += input_section->output_offset;
 696           return flag;
 697         }
 698       else
 699         {
 700           /* This is a partial relocation, but inplace, so modify the
 701              reloc record a bit.
 702
 703              If we've relocated with a symbol with a section, change
 704              into a ref to the section belonging to the symbol.  */
 705
 706           reloc_entry->address += input_section->output_offset;
 707
 708           /* WTF?? */
 709           if (abfd->xvec->flavour == bfd_target_coff_flavour
 710               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 711               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 712             {
 713               /* For m68k-coff, the addend was being subtracted twice during
 714                  relocation with -r.  Removing the line below this comment
 715                  fixes that problem; see PR 2953.
 716
 717 However, Ian wrote the following, regarding removing the line below,
 718 which explains why it is still enabled:  --djm
 719
 720 If you put a patch like that into BFD you need to check all the COFF
 721 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 722 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 723 problem in a different way.  There may very well be a reason that the
 724 code works as it does.
 725
 726 Hmmm.  The first obvious point is that bfd_perform_relocation should
 727 not have any tests that depend upon the flavour.  It's seem like
 728 entirely the wrong place for such a thing.  The second obvious point
 729 is that the current code ignores the reloc addend when producing
 730 relocatable output for COFF.  That's peculiar.  In fact, I really
 731 have no idea what the point of the line you want to remove is.
 732
 733 A typical COFF reloc subtracts the old value of the symbol and adds in
 734 the new value to the location in the object file (if it's a pc
 735 relative reloc it adds the difference between the symbol value and the
 736 location).  When relocating we need to preserve that property.
 737
 738 BFD handles this by setting the addend to the negative of the old
 739 value of the symbol.  Unfortunately it handles common symbols in a
 740 non-standard way (it doesn't subtract the old value) but that's a
 741 different story (we can't change it without losing backward
 742 compatibility with old object files) (coff-i386 does subtract the old
 743 value, to be compatible with existing coff-i386 targets, like SCO).
 744
 745 So everything works fine when not producing relocatable output.  When
 746 we are producing relocatable output, logically we should do exactly
 747 what we do when not producing relocatable output.  Therefore, your
 748 patch is correct.  In fact, it should probably always just set
 749 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 750 add the value into the object file.  This won't hurt the COFF code,
 751 which doesn't use the addend; I'm not sure what it will do to other
 752 formats (the thing to check for would be whether any formats both use
 753 the addend and set partial_inplace).
 754
 755 When I wanted to make coff-i386 produce relocatable output, I ran
 756 into the problem that you are running into: I wanted to remove that
 757 line.  Rather than risk it, I made the coff-i386 relocs use a special
 758 function; it's coff_i386_reloc in coff-i386.c.  The function
 759 specifically adds the addend field into the object file, knowing that
 760 bfd_perform_relocation is not going to.  If you remove that line, then
 761 coff-i386.c will wind up adding the addend field in twice.  It's
 762 trivial to fix; it just needs to be done.
 763
 764 The problem with removing the line is just that it may break some
 765 working code.  With BFD it's hard to be sure of anything.  The right
 766 way to deal with this is simply to build and test at least all the
 767 supported COFF targets.  It should be straightforward if time and disk
 768 space consuming.  For each target:
 769     1) build the linker
 770     2) generate some executable, and link it using -r (I would
 771        probably use paranoia.o and link against newlib/libc.a, which
 772        for all the supported targets would be available in
 773        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 774     3) make the change to reloc.c
 775     4) rebuild the linker
 776     5) repeat step 2
 777     6) if the resulting object files are the same, you have at least
 778        made it no worse
 779     7) if they are different you have to figure out which version is
 780        right
 781 */
 782               relocation -= reloc_entry->addend;
 783               reloc_entry->addend = 0;
 784             }
 785           else
 786             {
 787               reloc_entry->addend = relocation;
 788             }
 789         }
 790     }
 791   else
 792     {
 793       reloc_entry->addend = 0;
 794     }
 795
 796   /* FIXME: This overflow checking is incomplete, because the value
 797      might have overflowed before we get here.  For a correct check we
 798      need to compute the value in a size larger than bitsize, but we
 799      can't reasonably do that for a reloc the same size as a host
 800      machine word.
 801      FIXME: We should also do overflow checking on the result after
 802      adding in the value contained in the object file.  */
 803   if (howto->complain_on_overflow != complain_overflow_dont
 804       && flag == bfd_reloc_ok)
 805     flag = bfd_check_overflow (howto->complain_on_overflow,
 806                                howto->bitsize,
 807                                howto->rightshift,
 808                                bfd_arch_bits_per_address (abfd),
 809                                relocation);
 810
 811   /* Either we are relocating all the way, or we don't want to apply
 812      the relocation to the reloc entry (probably because there isn't
 813      any room in the output format to describe addends to relocs).  */
 814
 815   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 816      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 817      following program:
 818
 819      struct str
 820      {
 821        unsigned int i0;
 822      } s = { 0 };
 823
 824      int
 825      main ()
 826      {
 827        unsigned long x;
 828
 829        x = 0x100000000;
 830        x <<= (unsigned long) s.i0;
 831        if (x == 0)
 832          printf ("failed\n");
 833        else
 834          printf ("succeeded (%lx)\n", x);
 835      }
 836      */
 837
 838   relocation >>= (bfd_vma) howto->rightshift;
 839
 840   /* Shift everything up to where it's going to be used.  */
 841   relocation <<= (bfd_vma) howto->bitpos;
 842
 843   /* Wait for the day when all have the mask in them.  */
 844
 845   /* What we do:
 846      i instruction to be left alone
 847      o offset within instruction
 848      r relocation offset to apply
 849      S src mask
 850      D dst mask
 851      N ~dst mask
 852      A part 1
 853      B part 2
 854      R result
 855
 856      Do this:
 857      ((  i i i i i o o o o o  from bfd_get<size>
 858      and           S S S S S) to get the size offset we want
 859      +   r r r r r r r r r r) to get the final value to place
 860      and           D D D D D  to chop to right size
 861      -----------------------
 862      =             A A A A A
 863      And this:
 864      (   i i i i i o o o o o  from bfd_get<size>
 865      and N N N N N          ) get instruction
 866      -----------------------
 867      =   B B B B B
 868
 869      And then:
 870      (   B B B B B
 871      or            A A A A A)
 872      -----------------------
 873      =   R R R R R R R R R R  put into bfd_put<size>
 874      */
 875
 876 #define DOIT(x) \
 877   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 878
 879   switch (howto->size)
 880     {
 881     case 0:
 882       {
 883         char x = bfd_get_8 (abfd, (char *) data + octets);
 884         DOIT (x);
 885         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 886       }
 887       break;
 888
 889     case 1:
 890       {
 891         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 892         DOIT (x);
 893         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 894       }
 895       break;
 896     case 2:
 897       {
 898         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 899         DOIT (x);
 900         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 901       }
 902       break;
 903     case -2:
 904       {
 905         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 906         relocation = -relocation;
 907         DOIT (x);
 908         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 909       }
 910       break;
 911
 912     case -1:
 913       {
 914         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 915         relocation = -relocation;
 916         DOIT (x);
 917         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 918       }
 919       break;
 920
 921     case 3:
 922       /* Do nothing */
 923       break;
 924
 925     case 4:
 926 #ifdef BFD64
 927       {
 928         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 929         DOIT (x);
 930         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 931       }
 932 #else
 933       abort ();
 934 #endif
 935       break;
 936     default:
 937       return bfd_reloc_other;
 938     }
 939
 940   return flag;
 941 }
 942
 943 /*
 944 FUNCTION
 945         bfd_install_relocation
 946
 947 SYNOPSIS
 948         bfd_reloc_status_type bfd_install_relocation
 949           (bfd *abfd,
 950            arelent *reloc_entry,
 951            void *data, bfd_vma data_start,
 952            asection *input_section,
 953            char **error_message);
 954
 955 DESCRIPTION
 956         This looks remarkably like <<bfd_perform_relocation>>, except it
 957         does not expect that the section contents have been filled in.
 958         I.e., it's suitable for use when creating, rather than applying
 959         a relocation.
 960
 961         For now, this function should be considered reserved for the
 962         assembler.
 963 */
 964
 965 bfd_reloc_status_type
 966 bfd_install_relocation (bfd *abfd,
 967                         arelent *reloc_entry,
 968                         void *data_start,
 969                         bfd_vma data_start_offset,
 970                         asection *input_section,
 971                         char **error_message)
 972 {
 973   bfd_vma relocation;
 974   bfd_reloc_status_type flag = bfd_reloc_ok;
 975   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 976   bfd_vma output_base = 0;
 977   reloc_howto_type *howto = reloc_entry->howto;
 978   asection *reloc_target_output_section;
 979   asymbol *symbol;
 980   bfd_byte *data;
 981
 982   symbol = *(reloc_entry->sym_ptr_ptr);
 983   if (bfd_is_abs_section (symbol->section))
 984     {
 985       reloc_entry->address += input_section->output_offset;
 986       return bfd_reloc_ok;
 987     }
 988
 989   /* If there is a function supplied to handle this relocation type,
 990      call it.  It'll return `bfd_reloc_continue' if further processing
 991      can be done.  */
 992   if (howto->special_function)
 993     {
 994       bfd_reloc_status_type cont;
 995
 996       /* XXX - The special_function calls haven't been fixed up to deal
 997          with creating new relocations and section contents.  */
 998       cont = howto->special_function (abfd, reloc_entry, symbol,
 999                                       /* XXX - Non-portable! */
1000                                       ((bfd_byte *) data_start
1001                                        - data_start_offset),
1002                                       input_section, abfd, error_message);
1003       if (cont != bfd_reloc_continue)
1004         return cont;
1005     }
1006
1007   /* Is the address of the relocation really within the section?  */
1008   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1009     return bfd_reloc_outofrange;
1010
1011   /* Work out which section the relocation is targeted at and the
1012      initial relocation command value.  */
1013
1014   /* Get symbol value.  (Common symbols are special.)  */
1015   if (bfd_is_com_section (symbol->section))
1016     relocation = 0;
1017   else
1018     relocation = symbol->value;
1019
1020   reloc_target_output_section = symbol->section->output_section;
1021
1022   /* Convert input-section-relative symbol value to absolute.  */
1023   if (! howto->partial_inplace)
1024     output_base = 0;
1025   else
1026     output_base = reloc_target_output_section->vma;
1027
1028   relocation += output_base + symbol->section->output_offset;
1029
1030   /* Add in supplied addend.  */
1031   relocation += reloc_entry->addend;
1032
1033   /* Here the variable relocation holds the final address of the
1034      symbol we are relocating against, plus any addend.  */
1035
1036   if (howto->pc_relative)
1037     {
1038       /* This is a PC relative relocation.  We want to set RELOCATION
1039          to the distance between the address of the symbol and the
1040          location.  RELOCATION is already the address of the symbol.
1041
1042          We start by subtracting the address of the section containing
1043          the location.
1044
1045          If pcrel_offset is set, we must further subtract the position
1046          of the location within the section.  Some targets arrange for
1047          the addend to be the negative of the position of the location
1048          within the section; for example, i386-aout does this.  For
1049          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1050          include the position of the location; for example, m88kbcs,
1051          or ELF.  For those targets, pcrel_offset is TRUE.
1052
1053          If we are producing relocatable output, then we must ensure
1054          that this reloc will be correctly computed when the final
1055          relocation is done.  If pcrel_offset is FALSE we want to wind
1056          up with the negative of the location within the section,
1057          which means we must adjust the existing addend by the change
1058          in the location within the section.  If pcrel_offset is TRUE
1059          we do not want to adjust the existing addend at all.
1060
1061          FIXME: This seems logical to me, but for the case of
1062          producing relocatable output it is not what the code
1063          actually does.  I don't want to change it, because it seems
1064          far too likely that something will break.  */
1065
1066       relocation -=
1067         input_section->output_section->vma + input_section->output_offset;
1068
1069       if (howto->pcrel_offset && howto->partial_inplace)
1070         relocation -= reloc_entry->address;
1071     }
1072
1073   if (! howto->partial_inplace)
1074     {
1075       /* This is a partial relocation, and we want to apply the relocation
1076          to the reloc entry rather than the raw data. Modify the reloc
1077          inplace to reflect what we now know.  */
1078       reloc_entry->addend = relocation;
1079       reloc_entry->address += input_section->output_offset;
1080       return flag;
1081     }
1082   else
1083     {
1084       /* This is a partial relocation, but inplace, so modify the
1085          reloc record a bit.
1086
1087          If we've relocated with a symbol with a section, change
1088          into a ref to the section belonging to the symbol.  */
1089       reloc_entry->address += input_section->output_offset;
1090
1091       /* WTF?? */
1092       if (abfd->xvec->flavour == bfd_target_coff_flavour
1093           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1094           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1095         {
1096
1097           /* For m68k-coff, the addend was being subtracted twice during
1098              relocation with -r.  Removing the line below this comment
1099              fixes that problem; see PR 2953.
1100
1101 However, Ian wrote the following, regarding removing the line below,
1102 which explains why it is still enabled:  --djm
1103
1104 If you put a patch like that into BFD you need to check all the COFF
1105 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1106 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1107 problem in a different way.  There may very well be a reason that the
1108 code works as it does.
1109
1110 Hmmm.  The first obvious point is that bfd_install_relocation should
1111 not have any tests that depend upon the flavour.  It's seem like
1112 entirely the wrong place for such a thing.  The second obvious point
1113 is that the current code ignores the reloc addend when producing
1114 relocatable output for COFF.  That's peculiar.  In fact, I really
1115 have no idea what the point of the line you want to remove is.
1116
1117 A typical COFF reloc subtracts the old value of the symbol and adds in
1118 the new value to the location in the object file (if it's a pc
1119 relative reloc it adds the difference between the symbol value and the
1120 location).  When relocating we need to preserve that property.
1121
1122 BFD handles this by setting the addend to the negative of the old
1123 value of the symbol.  Unfortunately it handles common symbols in a
1124 non-standard way (it doesn't subtract the old value) but that's a
1125 different story (we can't change it without losing backward
1126 compatibility with old object files) (coff-i386 does subtract the old
1127 value, to be compatible with existing coff-i386 targets, like SCO).
1128
1129 So everything works fine when not producing relocatable output.  When
1130 we are producing relocatable output, logically we should do exactly
1131 what we do when not producing relocatable output.  Therefore, your
1132 patch is correct.  In fact, it should probably always just set
1133 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1134 add the value into the object file.  This won't hurt the COFF code,
1135 which doesn't use the addend; I'm not sure what it will do to other
1136 formats (the thing to check for would be whether any formats both use
1137 the addend and set partial_inplace).
1138
1139 When I wanted to make coff-i386 produce relocatable output, I ran
1140 into the problem that you are running into: I wanted to remove that
1141 line.  Rather than risk it, I made the coff-i386 relocs use a special
1142 function; it's coff_i386_reloc in coff-i386.c.  The function
1143 specifically adds the addend field into the object file, knowing that
1144 bfd_install_relocation is not going to.  If you remove that line, then
1145 coff-i386.c will wind up adding the addend field in twice.  It's
1146 trivial to fix; it just needs to be done.
1147
1148 The problem with removing the line is just that it may break some
1149 working code.  With BFD it's hard to be sure of anything.  The right
1150 way to deal with this is simply to build and test at least all the
1151 supported COFF targets.  It should be straightforward if time and disk
1152 space consuming.  For each target:
1153     1) build the linker
1154     2) generate some executable, and link it using -r (I would
1155        probably use paranoia.o and link against newlib/libc.a, which
1156        for all the supported targets would be available in
1157        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1158     3) make the change to reloc.c
1159     4) rebuild the linker
1160     5) repeat step 2
1161     6) if the resulting object files are the same, you have at least
1162        made it no worse
1163     7) if they are different you have to figure out which version is
1164        right.  */
1165           relocation -= reloc_entry->addend;
1166           /* FIXME: There should be no target specific code here...  */
1167           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1168             reloc_entry->addend = 0;
1169         }
1170       else
1171         {
1172           reloc_entry->addend = relocation;
1173         }
1174     }
1175
1176   /* FIXME: This overflow checking is incomplete, because the value
1177      might have overflowed before we get here.  For a correct check we
1178      need to compute the value in a size larger than bitsize, but we
1179      can't reasonably do that for a reloc the same size as a host
1180      machine word.
1181      FIXME: We should also do overflow checking on the result after
1182      adding in the value contained in the object file.  */
1183   if (howto->complain_on_overflow != complain_overflow_dont)
1184     flag = bfd_check_overflow (howto->complain_on_overflow,
1185                                howto->bitsize,
1186                                howto->rightshift,
1187                                bfd_arch_bits_per_address (abfd),
1188                                relocation);
1189
1190   /* Either we are relocating all the way, or we don't want to apply
1191      the relocation to the reloc entry (probably because there isn't
1192      any room in the output format to describe addends to relocs).  */
1193
1194   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1195      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1196      following program:
1197
1198      struct str
1199      {
1200        unsigned int i0;
1201      } s = { 0 };
1202
1203      int
1204      main ()
1205      {
1206        unsigned long x;
1207
1208        x = 0x100000000;
1209        x <<= (unsigned long) s.i0;
1210        if (x == 0)
1211          printf ("failed\n");
1212        else
1213          printf ("succeeded (%lx)\n", x);
1214      }
1215      */
1216
1217   relocation >>= (bfd_vma) howto->rightshift;
1218
1219   /* Shift everything up to where it's going to be used.  */
1220   relocation <<= (bfd_vma) howto->bitpos;
1221
1222   /* Wait for the day when all have the mask in them.  */
1223
1224   /* What we do:
1225      i instruction to be left alone
1226      o offset within instruction
1227      r relocation offset to apply
1228      S src mask
1229      D dst mask
1230      N ~dst mask
1231      A part 1
1232      B part 2
1233      R result
1234
1235      Do this:
1236      ((  i i i i i o o o o o  from bfd_get<size>
1237      and           S S S S S) to get the size offset we want
1238      +   r r r r r r r r r r) to get the final value to place
1239      and           D D D D D  to chop to right size
1240      -----------------------
1241      =             A A A A A
1242      And this:
1243      (   i i i i i o o o o o  from bfd_get<size>
1244      and N N N N N          ) get instruction
1245      -----------------------
1246      =   B B B B B
1247
1248      And then:
1249      (   B B B B B
1250      or            A A A A A)
1251      -----------------------
1252      =   R R R R R R R R R R  put into bfd_put<size>
1253      */
1254
1255 #define DOIT(x) \
1256   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1257
1258   data = (bfd_byte *) data_start + (octets - data_start_offset);
1259
1260   switch (howto->size)
1261     {
1262     case 0:
1263       {
1264         char x = bfd_get_8 (abfd, data);
1265         DOIT (x);
1266         bfd_put_8 (abfd, x, data);
1267       }
1268       break;
1269
1270     case 1:
1271       {
1272         short x = bfd_get_16 (abfd, data);
1273         DOIT (x);
1274         bfd_put_16 (abfd, (bfd_vma) x, data);
1275       }
1276       break;
1277     case 2:
1278       {
1279         long x = bfd_get_32 (abfd, data);
1280         DOIT (x);
1281         bfd_put_32 (abfd, (bfd_vma) x, data);
1282       }
1283       break;
1284     case -2:
1285       {
1286         long x = bfd_get_32 (abfd, data);
1287         relocation = -relocation;
1288         DOIT (x);
1289         bfd_put_32 (abfd, (bfd_vma) x, data);
1290       }
1291       break;
1292
1293     case 3:
1294       /* Do nothing */
1295       break;
1296
1297     case 4:
1298       {
1299         bfd_vma x = bfd_get_64 (abfd, data);
1300         DOIT (x);
1301         bfd_put_64 (abfd, x, data);
1302       }
1303       break;
1304     default:
1305       return bfd_reloc_other;
1306     }
1307
1308   return flag;
1309 }
1310
1311 /* This relocation routine is used by some of the backend linkers.
1312    They do not construct asymbol or arelent structures, so there is no
1313    reason for them to use bfd_perform_relocation.  Also,
1314    bfd_perform_relocation is so hacked up it is easier to write a new
1315    function than to try to deal with it.
1316
1317    This routine does a final relocation.  Whether it is useful for a
1318    relocatable link depends upon how the object format defines
1319    relocations.
1320
1321    FIXME: This routine ignores any special_function in the HOWTO,
1322    since the existing special_function values have been written for
1323    bfd_perform_relocation.
1324
1325    HOWTO is the reloc howto information.
1326    INPUT_BFD is the BFD which the reloc applies to.
1327    INPUT_SECTION is the section which the reloc applies to.
1328    CONTENTS is the contents of the section.
1329    ADDRESS is the address of the reloc within INPUT_SECTION.
1330    VALUE is the value of the symbol the reloc refers to.
1331    ADDEND is the addend of the reloc.  */
1332
1333 bfd_reloc_status_type
1334 _bfd_final_link_relocate (reloc_howto_type *howto,
1335                           bfd *input_bfd,
1336                           asection *input_section,
1337                           bfd_byte *contents,
1338                           bfd_vma address,
1339                           bfd_vma value,
1340                           bfd_vma addend)
1341 {
1342   bfd_vma relocation;
1343
1344   /* Sanity check the address.  */
1345   if (address > bfd_get_section_limit (input_bfd, input_section))
1346     return bfd_reloc_outofrange;
1347
1348   /* This function assumes that we are dealing with a basic relocation
1349      against a symbol.  We want to compute the value of the symbol to
1350      relocate to.  This is just VALUE, the value of the symbol, plus
1351      ADDEND, any addend associated with the reloc.  */
1352   relocation = value + addend;
1353
1354   /* If the relocation is PC relative, we want to set RELOCATION to
1355      the distance between the symbol (currently in RELOCATION) and the
1356      location we are relocating.  Some targets (e.g., i386-aout)
1357      arrange for the contents of the section to be the negative of the
1358      offset of the location within the section; for such targets
1359      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1360      simply leave the contents of the section as zero; for such
1361      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1362      need to subtract out the offset of the location within the
1363      section (which is just ADDRESS).  */
1364   if (howto->pc_relative)
1365     {
1366       relocation -= (input_section->output_section->vma
1367                      + input_section->output_offset);
1368       if (howto->pcrel_offset)
1369         relocation -= address;
1370     }
1371
1372   return _bfd_relocate_contents (howto, input_bfd, relocation,
1373                                  contents + address);
1374 }
1375
1376 /* Relocate a given location using a given value and howto.  */
1377
1378 bfd_reloc_status_type
1379 _bfd_relocate_contents (reloc_howto_type *howto,
1380                         bfd *input_bfd,
1381                         bfd_vma relocation,
1382                         bfd_byte *location)
1383 {
1384   int size;
1385   bfd_vma x = 0;
1386   bfd_reloc_status_type flag;
1387   unsigned int rightshift = howto->rightshift;
1388   unsigned int bitpos = howto->bitpos;
1389
1390   /* If the size is negative, negate RELOCATION.  This isn't very
1391      general.  */
1392   if (howto->size < 0)
1393     relocation = -relocation;
1394
1395   /* Get the value we are going to relocate.  */
1396   size = bfd_get_reloc_size (howto);
1397   switch (size)
1398     {
1399     default:
1400     case 0:
1401       abort ();
1402     case 1:
1403       x = bfd_get_8 (input_bfd, location);
1404       break;
1405     case 2:
1406       x = bfd_get_16 (input_bfd, location);
1407       break;
1408     case 4:
1409       x = bfd_get_32 (input_bfd, location);
1410       break;
1411     case 8:
1412 #ifdef BFD64
1413       x = bfd_get_64 (input_bfd, location);
1414 #else
1415       abort ();
1416 #endif
1417       break;
1418     }
1419
1420   /* Check for overflow.  FIXME: We may drop bits during the addition
1421      which we don't check for.  We must either check at every single
1422      operation, which would be tedious, or we must do the computations
1423      in a type larger than bfd_vma, which would be inefficient.  */
1424   flag = bfd_reloc_ok;
1425   if (howto->complain_on_overflow != complain_overflow_dont)
1426     {
1427       bfd_vma addrmask, fieldmask, signmask, ss;
1428       bfd_vma a, b, sum;
1429
1430       /* Get the values to be added together.  For signed and unsigned
1431          relocations, we assume that all values should be truncated to
1432          the size of an address.  For bitfields, all the bits matter.
1433          See also bfd_check_overflow.  */
1434       fieldmask = N_ONES (howto->bitsize);
1435       signmask = ~fieldmask;
1436       addrmask = N_ONES (bfd_arch_bits_per_address (input_bfd)) | fieldmask;
1437       a = (relocation & addrmask) >> rightshift;
1438       b = (x & howto->src_mask & addrmask) >> bitpos;
1439
1440       switch (howto->complain_on_overflow)
1441         {
1442         case complain_overflow_signed:
1443           /* If any sign bits are set, all sign bits must be set.
1444              That is, A must be a valid negative address after
1445              shifting.  */
1446           signmask = ~(fieldmask >> 1);
1447           /* Fall thru */
1448
1449         case complain_overflow_bitfield:
1450           /* Much like the signed check, but for a field one bit
1451              wider.  We allow a bitfield to represent numbers in the
1452              range -2**n to 2**n-1, where n is the number of bits in the
1453              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1454              can't overflow, which is exactly what we want.  */
1455           ss = a & signmask;
1456           if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
1457             flag = bfd_reloc_overflow;
1458
1459           /* We only need this next bit of code if the sign bit of B
1460              is below the sign bit of A.  This would only happen if
1461              SRC_MASK had fewer bits than BITSIZE.  Note that if
1462              SRC_MASK has more bits than BITSIZE, we can get into
1463              trouble; we would need to verify that B is in range, as
1464              we do for A above.  */
1465           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1466           ss >>= bitpos;
1467
1468           /* Set all the bits above the sign bit.  */
1469           b = (b ^ ss) - ss;
1470
1471           /* Now we can do the addition.  */
1472           sum = a + b;
1473
1474           /* See if the result has the correct sign.  Bits above the
1475              sign bit are junk now; ignore them.  If the sum is
1476              positive, make sure we did not have all negative inputs;
1477              if the sum is negative, make sure we did not have all
1478              positive inputs.  The test below looks only at the sign
1479              bits, and it really just
1480                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1481
1482              We mask with addrmask here to explicitly allow an address
1483              wrap-around.  The Linux kernel relies on it, and it is
1484              the only way to write assembler code which can run when
1485              loaded at a location 0x80000000 away from the location at
1486              which it is linked.  */
1487           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1488             flag = bfd_reloc_overflow;
1489           break;
1490
1491         case complain_overflow_unsigned:
1492           /* Checking for an unsigned overflow is relatively easy:
1493              trim the addresses and add, and trim the result as well.
1494              Overflow is normally indicated when the result does not
1495              fit in the field.  However, we also need to consider the
1496              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1497              input is 0x80000000, and bfd_vma is only 32 bits; then we
1498              will get sum == 0, but there is an overflow, since the
1499              inputs did not fit in the field.  Instead of doing a
1500              separate test, we can check for this by or-ing in the
1501              operands when testing for the sum overflowing its final
1502              field.  */
1503           sum = (a + b) & addrmask;
1504           if ((a | b | sum) & signmask)
1505             flag = bfd_reloc_overflow;
1506           break;
1507
1508         default:
1509           abort ();
1510         }
1511     }
1512
1513   /* Put RELOCATION in the right bits.  */
1514   relocation >>= (bfd_vma) rightshift;
1515   relocation <<= (bfd_vma) bitpos;
1516
1517   /* Add RELOCATION to the right bits of X.  */
1518   x = ((x & ~howto->dst_mask)
1519        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1520
1521   /* Put the relocated value back in the object file.  */
1522   switch (size)
1523     {
1524     default:
1525     case 0:
1526       abort ();
1527     case 1:
1528       bfd_put_8 (input_bfd, x, location);
1529       break;
1530     case 2:
1531       bfd_put_16 (input_bfd, x, location);
1532       break;
1533     case 4:
1534       bfd_put_32 (input_bfd, x, location);
1535       break;
1536     case 8:
1537 #ifdef BFD64
1538       bfd_put_64 (input_bfd, x, location);
1539 #else
1540       abort ();
1541 #endif
1542       break;
1543     }
1544
1545   return flag;
1546 }
1547
1548 /*
1549 DOCDD
1550 INODE
1551         howto manager,  , typedef arelent, Relocations
1552
1553 SUBSECTION
1554         The howto manager
1555
1556         When an application wants to create a relocation, but doesn't
1557         know what the target machine might call it, it can find out by
1558         using this bit of code.
1559
1560 */
1561
1562 /*
1563 TYPEDEF
1564         bfd_reloc_code_type
1565
1566 DESCRIPTION
1567         The insides of a reloc code.  The idea is that, eventually, there
1568         will be one enumerator for every type of relocation we ever do.
1569         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1570         return a howto pointer.
1571
1572         This does mean that the application must determine the correct
1573         enumerator value; you can't get a howto pointer from a random set
1574         of attributes.
1575
1576 SENUM
1577    bfd_reloc_code_real
1578
1579 ENUM
1580   BFD_RELOC_64
1581 ENUMX
1582   BFD_RELOC_32
1583 ENUMX
1584   BFD_RELOC_26
1585 ENUMX
1586   BFD_RELOC_24
1587 ENUMX
1588   BFD_RELOC_16
1589 ENUMX
1590   BFD_RELOC_14
1591 ENUMX
1592   BFD_RELOC_8
1593 ENUMDOC
1594   Basic absolute relocations of N bits.
1595
1596 ENUM
1597   BFD_RELOC_64_PCREL
1598 ENUMX
1599   BFD_RELOC_32_PCREL
1600 ENUMX
1601   BFD_RELOC_24_PCREL
1602 ENUMX
1603   BFD_RELOC_16_PCREL
1604 ENUMX
1605   BFD_RELOC_12_PCREL
1606 ENUMX
1607   BFD_RELOC_8_PCREL
1608 ENUMDOC
1609   PC-relative relocations.  Sometimes these are relative to the address
1610 of the relocation itself; sometimes they are relative to the start of
1611 the section containing the relocation.  It depends on the specific target.
1612
1613 The 24-bit relocation is used in some Intel 960 configurations.
1614
1615 ENUM
1616   BFD_RELOC_32_SECREL
1617 ENUMDOC
1618   Section relative relocations.  Some targets need this for DWARF2.
1619
1620 ENUM
1621   BFD_RELOC_32_GOT_PCREL
1622 ENUMX
1623   BFD_RELOC_16_GOT_PCREL
1624 ENUMX
1625   BFD_RELOC_8_GOT_PCREL
1626 ENUMX
1627   BFD_RELOC_32_GOTOFF
1628 ENUMX
1629   BFD_RELOC_16_GOTOFF
1630 ENUMX
1631   BFD_RELOC_LO16_GOTOFF
1632 ENUMX
1633   BFD_RELOC_HI16_GOTOFF
1634 ENUMX
1635   BFD_RELOC_HI16_S_GOTOFF
1636 ENUMX
1637   BFD_RELOC_8_GOTOFF
1638 ENUMX
1639   BFD_RELOC_64_PLT_PCREL
1640 ENUMX
1641   BFD_RELOC_32_PLT_PCREL
1642 ENUMX
1643   BFD_RELOC_24_PLT_PCREL
1644 ENUMX
1645   BFD_RELOC_16_PLT_PCREL
1646 ENUMX
1647   BFD_RELOC_8_PLT_PCREL
1648 ENUMX
1649   BFD_RELOC_64_PLTOFF
1650 ENUMX
1651   BFD_RELOC_32_PLTOFF
1652 ENUMX
1653   BFD_RELOC_16_PLTOFF
1654 ENUMX
1655   BFD_RELOC_LO16_PLTOFF
1656 ENUMX
1657   BFD_RELOC_HI16_PLTOFF
1658 ENUMX
1659   BFD_RELOC_HI16_S_PLTOFF
1660 ENUMX
1661   BFD_RELOC_8_PLTOFF
1662 ENUMDOC
1663   For ELF.
1664
1665 ENUM
1666   BFD_RELOC_68K_GLOB_DAT
1667 ENUMX
1668   BFD_RELOC_68K_JMP_SLOT
1669 ENUMX
1670   BFD_RELOC_68K_RELATIVE
1671 ENUMDOC
1672   Relocations used by 68K ELF.
1673
1674 ENUM
1675   BFD_RELOC_32_BASEREL
1676 ENUMX
1677   BFD_RELOC_16_BASEREL
1678 ENUMX
1679   BFD_RELOC_LO16_BASEREL
1680 ENUMX
1681   BFD_RELOC_HI16_BASEREL
1682 ENUMX
1683   BFD_RELOC_HI16_S_BASEREL
1684 ENUMX
1685   BFD_RELOC_8_BASEREL
1686 ENUMX
1687   BFD_RELOC_RVA
1688 ENUMDOC
1689   Linkage-table relative.
1690
1691 ENUM
1692   BFD_RELOC_8_FFnn
1693 ENUMDOC
1694   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1695
1696 ENUM
1697   BFD_RELOC_32_PCREL_S2
1698 ENUMX
1699   BFD_RELOC_16_PCREL_S2
1700 ENUMX
1701   BFD_RELOC_23_PCREL_S2
1702 ENUMDOC
1703   These PC-relative relocations are stored as word displacements --
1704 i.e., byte displacements shifted right two bits.  The 30-bit word
1705 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1706 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1707 signed 16-bit displacement is used on the MIPS, and the 23-bit
1708 displacement is used on the Alpha.
1709
1710 ENUM
1711   BFD_RELOC_HI22
1712 ENUMX
1713   BFD_RELOC_LO10
1714 ENUMDOC
1715   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1716 the target word.  These are used on the SPARC.
1717
1718 ENUM
1719   BFD_RELOC_GPREL16
1720 ENUMX
1721   BFD_RELOC_GPREL32
1722 ENUMDOC
1723   For systems that allocate a Global Pointer register, these are
1724 displacements off that register.  These relocation types are
1725 handled specially, because the value the register will have is
1726 decided relatively late.
1727
1728 ENUM
1729   BFD_RELOC_I960_CALLJ
1730 ENUMDOC
1731   Reloc types used for i960/b.out.
1732
1733 ENUM
1734   BFD_RELOC_NONE
1735 ENUMX
1736   BFD_RELOC_SPARC_WDISP22
1737 ENUMX
1738   BFD_RELOC_SPARC22
1739 ENUMX
1740   BFD_RELOC_SPARC13
1741 ENUMX
1742   BFD_RELOC_SPARC_GOT10
1743 ENUMX
1744   BFD_RELOC_SPARC_GOT13
1745 ENUMX
1746   BFD_RELOC_SPARC_GOT22
1747 ENUMX
1748   BFD_RELOC_SPARC_PC10
1749 ENUMX
1750   BFD_RELOC_SPARC_PC22
1751 ENUMX
1752   BFD_RELOC_SPARC_WPLT30
1753 ENUMX
1754   BFD_RELOC_SPARC_COPY
1755 ENUMX
1756   BFD_RELOC_SPARC_GLOB_DAT
1757 ENUMX
1758   BFD_RELOC_SPARC_JMP_SLOT
1759 ENUMX
1760   BFD_RELOC_SPARC_RELATIVE
1761 ENUMX
1762   BFD_RELOC_SPARC_UA16
1763 ENUMX
1764   BFD_RELOC_SPARC_UA32
1765 ENUMX
1766   BFD_RELOC_SPARC_UA64
1767 ENUMDOC
1768   SPARC ELF relocations.  There is probably some overlap with other
1769   relocation types already defined.
1770
1771 ENUM
1772   BFD_RELOC_SPARC_BASE13
1773 ENUMX
1774   BFD_RELOC_SPARC_BASE22
1775 ENUMDOC
1776   I think these are specific to SPARC a.out (e.g., Sun 4).
1777
1778 ENUMEQ
1779   BFD_RELOC_SPARC_64
1780   BFD_RELOC_64
1781 ENUMX
1782   BFD_RELOC_SPARC_10
1783 ENUMX
1784   BFD_RELOC_SPARC_11
1785 ENUMX
1786   BFD_RELOC_SPARC_OLO10
1787 ENUMX
1788   BFD_RELOC_SPARC_HH22
1789 ENUMX
1790   BFD_RELOC_SPARC_HM10
1791 ENUMX
1792   BFD_RELOC_SPARC_LM22
1793 ENUMX
1794   BFD_RELOC_SPARC_PC_HH22
1795 ENUMX
1796   BFD_RELOC_SPARC_PC_HM10
1797 ENUMX
1798   BFD_RELOC_SPARC_PC_LM22
1799 ENUMX
1800   BFD_RELOC_SPARC_WDISP16
1801 ENUMX
1802   BFD_RELOC_SPARC_WDISP19
1803 ENUMX
1804   BFD_RELOC_SPARC_7
1805 ENUMX
1806   BFD_RELOC_SPARC_6
1807 ENUMX
1808   BFD_RELOC_SPARC_5
1809 ENUMEQX
1810   BFD_RELOC_SPARC_DISP64
1811   BFD_RELOC_64_PCREL
1812 ENUMX
1813   BFD_RELOC_SPARC_PLT32
1814 ENUMX
1815   BFD_RELOC_SPARC_PLT64
1816 ENUMX
1817   BFD_RELOC_SPARC_HIX22
1818 ENUMX
1819   BFD_RELOC_SPARC_LOX10
1820 ENUMX
1821   BFD_RELOC_SPARC_H44
1822 ENUMX
1823   BFD_RELOC_SPARC_M44
1824 ENUMX
1825   BFD_RELOC_SPARC_L44
1826 ENUMX
1827   BFD_RELOC_SPARC_REGISTER
1828 ENUMDOC
1829   SPARC64 relocations
1830
1831 ENUM
1832   BFD_RELOC_SPARC_REV32
1833 ENUMDOC
1834   SPARC little endian relocation
1835 ENUM
1836   BFD_RELOC_SPARC_TLS_GD_HI22
1837 ENUMX
1838   BFD_RELOC_SPARC_TLS_GD_LO10
1839 ENUMX
1840   BFD_RELOC_SPARC_TLS_GD_ADD
1841 ENUMX
1842   BFD_RELOC_SPARC_TLS_GD_CALL
1843 ENUMX
1844   BFD_RELOC_SPARC_TLS_LDM_HI22
1845 ENUMX
1846   BFD_RELOC_SPARC_TLS_LDM_LO10
1847 ENUMX
1848   BFD_RELOC_SPARC_TLS_LDM_ADD
1849 ENUMX
1850   BFD_RELOC_SPARC_TLS_LDM_CALL
1851 ENUMX
1852   BFD_RELOC_SPARC_TLS_LDO_HIX22
1853 ENUMX
1854   BFD_RELOC_SPARC_TLS_LDO_LOX10
1855 ENUMX
1856   BFD_RELOC_SPARC_TLS_LDO_ADD
1857 ENUMX
1858   BFD_RELOC_SPARC_TLS_IE_HI22
1859 ENUMX
1860   BFD_RELOC_SPARC_TLS_IE_LO10
1861 ENUMX
1862   BFD_RELOC_SPARC_TLS_IE_LD
1863 ENUMX
1864   BFD_RELOC_SPARC_TLS_IE_LDX
1865 ENUMX
1866   BFD_RELOC_SPARC_TLS_IE_ADD
1867 ENUMX
1868   BFD_RELOC_SPARC_TLS_LE_HIX22
1869 ENUMX
1870   BFD_RELOC_SPARC_TLS_LE_LOX10
1871 ENUMX
1872   BFD_RELOC_SPARC_TLS_DTPMOD32
1873 ENUMX
1874   BFD_RELOC_SPARC_TLS_DTPMOD64
1875 ENUMX
1876   BFD_RELOC_SPARC_TLS_DTPOFF32
1877 ENUMX
1878   BFD_RELOC_SPARC_TLS_DTPOFF64
1879 ENUMX
1880   BFD_RELOC_SPARC_TLS_TPOFF32
1881 ENUMX
1882   BFD_RELOC_SPARC_TLS_TPOFF64
1883 ENUMDOC
1884   SPARC TLS relocations
1885
1886 ENUM
1887   BFD_RELOC_ALPHA_GPDISP_HI16
1888 ENUMDOC
1889   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
1890      "addend" in some special way.
1891   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1892      writing; when reading, it will be the absolute section symbol.  The
1893      addend is the displacement in bytes of the "lda" instruction from
1894      the "ldah" instruction (which is at the address of this reloc).
1895 ENUM
1896   BFD_RELOC_ALPHA_GPDISP_LO16
1897 ENUMDOC
1898   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1899      with GPDISP_HI16 relocs.  The addend is ignored when writing the
1900      relocations out, and is filled in with the file's GP value on
1901      reading, for convenience.
1902
1903 ENUM
1904   BFD_RELOC_ALPHA_GPDISP
1905 ENUMDOC
1906   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
1907      relocation except that there is no accompanying GPDISP_LO16
1908      relocation.
1909
1910 ENUM
1911   BFD_RELOC_ALPHA_LITERAL
1912 ENUMX
1913   BFD_RELOC_ALPHA_ELF_LITERAL
1914 ENUMX
1915   BFD_RELOC_ALPHA_LITUSE
1916 ENUMDOC
1917   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
1918      the assembler turns it into a LDQ instruction to load the address of
1919      the symbol, and then fills in a register in the real instruction.
1920
1921      The LITERAL reloc, at the LDQ instruction, refers to the .lita
1922      section symbol.  The addend is ignored when writing, but is filled
1923      in with the file's GP value on reading, for convenience, as with the
1924      GPDISP_LO16 reloc.
1925
1926      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
1927      It should refer to the symbol to be referenced, as with 16_GOTOFF,
1928      but it generates output not based on the position within the .got
1929      section, but relative to the GP value chosen for the file during the
1930      final link stage.
1931
1932      The LITUSE reloc, on the instruction using the loaded address, gives
1933      information to the linker that it might be able to use to optimize
1934      away some literal section references.  The symbol is ignored (read
1935      as the absolute section symbol), and the "addend" indicates the type
1936      of instruction using the register:
1937               1 - "memory" fmt insn
1938               2 - byte-manipulation (byte offset reg)
1939               3 - jsr (target of branch)
1940
1941 ENUM
1942   BFD_RELOC_ALPHA_HINT
1943 ENUMDOC
1944   The HINT relocation indicates a value that should be filled into the
1945      "hint" field of a jmp/jsr/ret instruction, for possible branch-
1946      prediction logic which may be provided on some processors.
1947
1948 ENUM
1949   BFD_RELOC_ALPHA_LINKAGE
1950 ENUMDOC
1951   The LINKAGE relocation outputs a linkage pair in the object file,
1952      which is filled by the linker.
1953
1954 ENUM
1955   BFD_RELOC_ALPHA_CODEADDR
1956 ENUMDOC
1957   The CODEADDR relocation outputs a STO_CA in the object file,
1958      which is filled by the linker.
1959
1960 ENUM
1961   BFD_RELOC_ALPHA_GPREL_HI16
1962 ENUMX
1963   BFD_RELOC_ALPHA_GPREL_LO16
1964 ENUMDOC
1965   The GPREL_HI/LO relocations together form a 32-bit offset from the
1966      GP register.
1967
1968 ENUM
1969   BFD_RELOC_ALPHA_BRSGP
1970 ENUMDOC
1971   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
1972   share a common GP, and the target address is adjusted for
1973   STO_ALPHA_STD_GPLOAD.
1974
1975 ENUM
1976   BFD_RELOC_ALPHA_TLSGD
1977 ENUMX
1978   BFD_RELOC_ALPHA_TLSLDM
1979 ENUMX
1980   BFD_RELOC_ALPHA_DTPMOD64
1981 ENUMX
1982   BFD_RELOC_ALPHA_GOTDTPREL16
1983 ENUMX
1984   BFD_RELOC_ALPHA_DTPREL64
1985 ENUMX
1986   BFD_RELOC_ALPHA_DTPREL_HI16
1987 ENUMX
1988   BFD_RELOC_ALPHA_DTPREL_LO16
1989 ENUMX
1990   BFD_RELOC_ALPHA_DTPREL16
1991 ENUMX
1992   BFD_RELOC_ALPHA_GOTTPREL16
1993 ENUMX
1994   BFD_RELOC_ALPHA_TPREL64
1995 ENUMX
1996   BFD_RELOC_ALPHA_TPREL_HI16
1997 ENUMX
1998   BFD_RELOC_ALPHA_TPREL_LO16
1999 ENUMX
2000   BFD_RELOC_ALPHA_TPREL16
2001 ENUMDOC
2002   Alpha thread-local storage relocations.
2003
2004 ENUM
2005   BFD_RELOC_MIPS_JMP
2006 ENUMDOC
2007   Bits 27..2 of the relocation address shifted right 2 bits;
2008      simple reloc otherwise.
2009
2010 ENUM
2011   BFD_RELOC_MIPS16_JMP
2012 ENUMDOC
2013   The MIPS16 jump instruction.
2014
2015 ENUM
2016   BFD_RELOC_MIPS16_GPREL
2017 ENUMDOC
2018   MIPS16 GP relative reloc.
2019
2020 ENUM
2021   BFD_RELOC_HI16
2022 ENUMDOC
2023   High 16 bits of 32-bit value; simple reloc.
2024 ENUM
2025   BFD_RELOC_HI16_S
2026 ENUMDOC
2027   High 16 bits of 32-bit value but the low 16 bits will be sign
2028      extended and added to form the final result.  If the low 16
2029      bits form a negative number, we need to add one to the high value
2030      to compensate for the borrow when the low bits are added.
2031 ENUM
2032   BFD_RELOC_LO16
2033 ENUMDOC
2034   Low 16 bits.
2035
2036 ENUM
2037   BFD_RELOC_HI16_PCREL
2038 ENUMDOC
2039   High 16 bits of 32-bit pc-relative value
2040 ENUM
2041   BFD_RELOC_HI16_S_PCREL
2042 ENUMDOC
2043   High 16 bits of 32-bit pc-relative value, adjusted
2044 ENUM
2045   BFD_RELOC_LO16_PCREL
2046 ENUMDOC
2047   Low 16 bits of pc-relative value
2048
2049 ENUM
2050   BFD_RELOC_MIPS16_HI16
2051 ENUMDOC
2052   MIPS16 high 16 bits of 32-bit value.
2053 ENUM
2054   BFD_RELOC_MIPS16_HI16_S
2055 ENUMDOC
2056   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2057      extended and added to form the final result.  If the low 16
2058      bits form a negative number, we need to add one to the high value
2059      to compensate for the borrow when the low bits are added.
2060 ENUM
2061   BFD_RELOC_MIPS16_LO16
2062 ENUMDOC
2063   MIPS16 low 16 bits.
2064
2065 ENUM
2066   BFD_RELOC_MIPS_LITERAL
2067 ENUMDOC
2068   Relocation against a MIPS literal section.
2069
2070 ENUM
2071   BFD_RELOC_MIPS_GOT16
2072 ENUMX
2073   BFD_RELOC_MIPS_CALL16
2074 ENUMX
2075   BFD_RELOC_MIPS_GOT_HI16
2076 ENUMX
2077   BFD_RELOC_MIPS_GOT_LO16
2078 ENUMX
2079   BFD_RELOC_MIPS_CALL_HI16
2080 ENUMX
2081   BFD_RELOC_MIPS_CALL_LO16
2082 ENUMX
2083   BFD_RELOC_MIPS_SUB
2084 ENUMX
2085   BFD_RELOC_MIPS_GOT_PAGE
2086 ENUMX
2087   BFD_RELOC_MIPS_GOT_OFST
2088 ENUMX
2089   BFD_RELOC_MIPS_GOT_DISP
2090 ENUMX
2091   BFD_RELOC_MIPS_SHIFT5
2092 ENUMX
2093   BFD_RELOC_MIPS_SHIFT6
2094 ENUMX
2095   BFD_RELOC_MIPS_INSERT_A
2096 ENUMX
2097   BFD_RELOC_MIPS_INSERT_B
2098 ENUMX
2099   BFD_RELOC_MIPS_DELETE
2100 ENUMX
2101   BFD_RELOC_MIPS_HIGHEST
2102 ENUMX
2103   BFD_RELOC_MIPS_HIGHER
2104 ENUMX
2105   BFD_RELOC_MIPS_SCN_DISP
2106 ENUMX
2107   BFD_RELOC_MIPS_REL16
2108 ENUMX
2109   BFD_RELOC_MIPS_RELGOT
2110 ENUMX
2111   BFD_RELOC_MIPS_JALR
2112 ENUMX
2113   BFD_RELOC_MIPS_TLS_DTPMOD32
2114 ENUMX
2115   BFD_RELOC_MIPS_TLS_DTPREL32
2116 ENUMX
2117   BFD_RELOC_MIPS_TLS_DTPMOD64
2118 ENUMX
2119   BFD_RELOC_MIPS_TLS_DTPREL64
2120 ENUMX
2121   BFD_RELOC_MIPS_TLS_GD
2122 ENUMX
2123   BFD_RELOC_MIPS_TLS_LDM
2124 ENUMX
2125   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2126 ENUMX
2127   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2128 ENUMX
2129   BFD_RELOC_MIPS_TLS_GOTTPREL
2130 ENUMX
2131   BFD_RELOC_MIPS_TLS_TPREL32
2132 ENUMX
2133   BFD_RELOC_MIPS_TLS_TPREL64
2134 ENUMX
2135   BFD_RELOC_MIPS_TLS_TPREL_HI16
2136 ENUMX
2137   BFD_RELOC_MIPS_TLS_TPREL_LO16
2138 ENUMDOC
2139   MIPS ELF relocations.
2140 COMMENT
2141
2142 ENUM
2143   BFD_RELOC_MIPS_COPY
2144 ENUMX
2145   BFD_RELOC_MIPS_JUMP_SLOT
2146 ENUMDOC
2147   MIPS ELF relocations (VxWorks extensions).
2148 COMMENT
2149
2150 ENUM
2151   BFD_RELOC_FRV_LABEL16
2152 ENUMX
2153   BFD_RELOC_FRV_LABEL24
2154 ENUMX
2155   BFD_RELOC_FRV_LO16
2156 ENUMX
2157   BFD_RELOC_FRV_HI16
2158 ENUMX
2159   BFD_RELOC_FRV_GPREL12
2160 ENUMX
2161   BFD_RELOC_FRV_GPRELU12
2162 ENUMX
2163   BFD_RELOC_FRV_GPREL32
2164 ENUMX
2165   BFD_RELOC_FRV_GPRELHI
2166 ENUMX
2167   BFD_RELOC_FRV_GPRELLO
2168 ENUMX
2169   BFD_RELOC_FRV_GOT12
2170 ENUMX
2171   BFD_RELOC_FRV_GOTHI
2172 ENUMX
2173   BFD_RELOC_FRV_GOTLO
2174 ENUMX
2175   BFD_RELOC_FRV_FUNCDESC
2176 ENUMX
2177   BFD_RELOC_FRV_FUNCDESC_GOT12
2178 ENUMX
2179   BFD_RELOC_FRV_FUNCDESC_GOTHI
2180 ENUMX
2181   BFD_RELOC_FRV_FUNCDESC_GOTLO
2182 ENUMX
2183   BFD_RELOC_FRV_FUNCDESC_VALUE
2184 ENUMX
2185   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2186 ENUMX
2187   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2188 ENUMX
2189   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2190 ENUMX
2191   BFD_RELOC_FRV_GOTOFF12
2192 ENUMX
2193   BFD_RELOC_FRV_GOTOFFHI
2194 ENUMX
2195   BFD_RELOC_FRV_GOTOFFLO
2196 ENUMX
2197   BFD_RELOC_FRV_GETTLSOFF
2198 ENUMX
2199   BFD_RELOC_FRV_TLSDESC_VALUE
2200 ENUMX
2201   BFD_RELOC_FRV_GOTTLSDESC12
2202 ENUMX
2203   BFD_RELOC_FRV_GOTTLSDESCHI
2204 ENUMX
2205   BFD_RELOC_FRV_GOTTLSDESCLO
2206 ENUMX
2207   BFD_RELOC_FRV_TLSMOFF12
2208 ENUMX
2209   BFD_RELOC_FRV_TLSMOFFHI
2210 ENUMX
2211   BFD_RELOC_FRV_TLSMOFFLO
2212 ENUMX
2213   BFD_RELOC_FRV_GOTTLSOFF12
2214 ENUMX
2215   BFD_RELOC_FRV_GOTTLSOFFHI
2216 ENUMX
2217   BFD_RELOC_FRV_GOTTLSOFFLO
2218 ENUMX
2219   BFD_RELOC_FRV_TLSOFF
2220 ENUMX
2221   BFD_RELOC_FRV_TLSDESC_RELAX
2222 ENUMX
2223   BFD_RELOC_FRV_GETTLSOFF_RELAX
2224 ENUMX
2225   BFD_RELOC_FRV_TLSOFF_RELAX
2226 ENUMX
2227   BFD_RELOC_FRV_TLSMOFF
2228 ENUMDOC
2229   Fujitsu Frv Relocations.
2230 COMMENT
2231
2232 ENUM
2233   BFD_RELOC_MN10300_GOTOFF24
2234 ENUMDOC
2235   This is a 24bit GOT-relative reloc for the mn10300.
2236 ENUM
2237   BFD_RELOC_MN10300_GOT32
2238 ENUMDOC
2239   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2240   in the instruction.
2241 ENUM
2242   BFD_RELOC_MN10300_GOT24
2243 ENUMDOC
2244   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2245   in the instruction.
2246 ENUM
2247   BFD_RELOC_MN10300_GOT16
2248 ENUMDOC
2249   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2250   in the instruction.
2251 ENUM
2252   BFD_RELOC_MN10300_COPY
2253 ENUMDOC
2254   Copy symbol at runtime.
2255 ENUM
2256   BFD_RELOC_MN10300_GLOB_DAT
2257 ENUMDOC
2258   Create GOT entry.
2259 ENUM
2260   BFD_RELOC_MN10300_JMP_SLOT
2261 ENUMDOC
2262   Create PLT entry.
2263 ENUM
2264   BFD_RELOC_MN10300_RELATIVE
2265 ENUMDOC
2266   Adjust by program base.
2267 COMMENT
2268
2269 ENUM
2270   BFD_RELOC_386_GOT32
2271 ENUMX
2272   BFD_RELOC_386_PLT32
2273 ENUMX
2274   BFD_RELOC_386_COPY
2275 ENUMX
2276   BFD_RELOC_386_GLOB_DAT
2277 ENUMX
2278   BFD_RELOC_386_JUMP_SLOT
2279 ENUMX
2280   BFD_RELOC_386_RELATIVE
2281 ENUMX
2282   BFD_RELOC_386_GOTOFF
2283 ENUMX
2284   BFD_RELOC_386_GOTPC
2285 ENUMX
2286   BFD_RELOC_386_TLS_TPOFF
2287 ENUMX
2288   BFD_RELOC_386_TLS_IE
2289 ENUMX
2290   BFD_RELOC_386_TLS_GOTIE
2291 ENUMX
2292   BFD_RELOC_386_TLS_LE
2293 ENUMX
2294   BFD_RELOC_386_TLS_GD
2295 ENUMX
2296   BFD_RELOC_386_TLS_LDM
2297 ENUMX
2298   BFD_RELOC_386_TLS_LDO_32
2299 ENUMX
2300   BFD_RELOC_386_TLS_IE_32
2301 ENUMX
2302   BFD_RELOC_386_TLS_LE_32
2303 ENUMX
2304   BFD_RELOC_386_TLS_DTPMOD32
2305 ENUMX
2306   BFD_RELOC_386_TLS_DTPOFF32
2307 ENUMX
2308   BFD_RELOC_386_TLS_TPOFF32
2309 ENUMX
2310   BFD_RELOC_386_TLS_GOTDESC
2311 ENUMX
2312   BFD_RELOC_386_TLS_DESC_CALL
2313 ENUMX
2314   BFD_RELOC_386_TLS_DESC
2315 ENUMDOC
2316   i386/elf relocations
2317
2318 ENUM
2319   BFD_RELOC_X86_64_GOT32
2320 ENUMX
2321   BFD_RELOC_X86_64_PLT32
2322 ENUMX
2323   BFD_RELOC_X86_64_COPY
2324 ENUMX
2325   BFD_RELOC_X86_64_GLOB_DAT
2326 ENUMX
2327   BFD_RELOC_X86_64_JUMP_SLOT
2328 ENUMX
2329   BFD_RELOC_X86_64_RELATIVE
2330 ENUMX
2331   BFD_RELOC_X86_64_GOTPCREL
2332 ENUMX
2333   BFD_RELOC_X86_64_32S
2334 ENUMX
2335   BFD_RELOC_X86_64_DTPMOD64
2336 ENUMX
2337   BFD_RELOC_X86_64_DTPOFF64
2338 ENUMX
2339   BFD_RELOC_X86_64_TPOFF64
2340 ENUMX
2341   BFD_RELOC_X86_64_TLSGD
2342 ENUMX
2343   BFD_RELOC_X86_64_TLSLD
2344 ENUMX
2345   BFD_RELOC_X86_64_DTPOFF32
2346 ENUMX
2347   BFD_RELOC_X86_64_GOTTPOFF
2348 ENUMX
2349   BFD_RELOC_X86_64_TPOFF32
2350 ENUMX
2351   BFD_RELOC_X86_64_GOTOFF64
2352 ENUMX
2353   BFD_RELOC_X86_64_GOTPC32
2354 ENUMX
2355   BFD_RELOC_X86_64_GOT64
2356 ENUMX
2357   BFD_RELOC_X86_64_GOTPCREL64
2358 ENUMX
2359   BFD_RELOC_X86_64_GOTPC64
2360 ENUMX
2361   BFD_RELOC_X86_64_GOTPLT64
2362 ENUMX
2363   BFD_RELOC_X86_64_PLTOFF64
2364 ENUMX
2365   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2366 ENUMX
2367   BFD_RELOC_X86_64_TLSDESC_CALL
2368 ENUMX
2369   BFD_RELOC_X86_64_TLSDESC
2370 ENUMDOC
2371   x86-64/elf relocations
2372
2373 ENUM
2374   BFD_RELOC_NS32K_IMM_8
2375 ENUMX
2376   BFD_RELOC_NS32K_IMM_16
2377 ENUMX
2378   BFD_RELOC_NS32K_IMM_32
2379 ENUMX
2380   BFD_RELOC_NS32K_IMM_8_PCREL
2381 ENUMX
2382   BFD_RELOC_NS32K_IMM_16_PCREL
2383 ENUMX
2384   BFD_RELOC_NS32K_IMM_32_PCREL
2385 ENUMX
2386   BFD_RELOC_NS32K_DISP_8
2387 ENUMX
2388   BFD_RELOC_NS32K_DISP_16
2389 ENUMX
2390   BFD_RELOC_NS32K_DISP_32
2391 ENUMX
2392   BFD_RELOC_NS32K_DISP_8_PCREL
2393 ENUMX
2394   BFD_RELOC_NS32K_DISP_16_PCREL
2395 ENUMX
2396   BFD_RELOC_NS32K_DISP_32_PCREL
2397 ENUMDOC
2398   ns32k relocations
2399
2400 ENUM
2401   BFD_RELOC_PDP11_DISP_8_PCREL
2402 ENUMX
2403   BFD_RELOC_PDP11_DISP_6_PCREL
2404 ENUMDOC
2405   PDP11 relocations
2406
2407 ENUM
2408   BFD_RELOC_PJ_CODE_HI16
2409 ENUMX
2410   BFD_RELOC_PJ_CODE_LO16
2411 ENUMX
2412   BFD_RELOC_PJ_CODE_DIR16
2413 ENUMX
2414   BFD_RELOC_PJ_CODE_DIR32
2415 ENUMX
2416   BFD_RELOC_PJ_CODE_REL16
2417 ENUMX
2418   BFD_RELOC_PJ_CODE_REL32
2419 ENUMDOC
2420   Picojava relocs.  Not all of these appear in object files.
2421
2422 ENUM
2423   BFD_RELOC_PPC_B26
2424 ENUMX
2425   BFD_RELOC_PPC_BA26
2426 ENUMX
2427   BFD_RELOC_PPC_TOC16
2428 ENUMX
2429   BFD_RELOC_PPC_B16
2430 ENUMX
2431   BFD_RELOC_PPC_B16_BRTAKEN
2432 ENUMX
2433   BFD_RELOC_PPC_B16_BRNTAKEN
2434 ENUMX
2435   BFD_RELOC_PPC_BA16
2436 ENUMX
2437   BFD_RELOC_PPC_BA16_BRTAKEN
2438 ENUMX
2439   BFD_RELOC_PPC_BA16_BRNTAKEN
2440 ENUMX
2441   BFD_RELOC_PPC_COPY
2442 ENUMX
2443   BFD_RELOC_PPC_GLOB_DAT
2444 ENUMX
2445   BFD_RELOC_PPC_JMP_SLOT
2446 ENUMX
2447   BFD_RELOC_PPC_RELATIVE
2448 ENUMX
2449   BFD_RELOC_PPC_LOCAL24PC
2450 ENUMX
2451   BFD_RELOC_PPC_EMB_NADDR32
2452 ENUMX
2453   BFD_RELOC_PPC_EMB_NADDR16
2454 ENUMX
2455   BFD_RELOC_PPC_EMB_NADDR16_LO
2456 ENUMX
2457   BFD_RELOC_PPC_EMB_NADDR16_HI
2458 ENUMX
2459   BFD_RELOC_PPC_EMB_NADDR16_HA
2460 ENUMX
2461   BFD_RELOC_PPC_EMB_SDAI16
2462 ENUMX
2463   BFD_RELOC_PPC_EMB_SDA2I16
2464 ENUMX
2465   BFD_RELOC_PPC_EMB_SDA2REL
2466 ENUMX
2467   BFD_RELOC_PPC_EMB_SDA21
2468 ENUMX
2469   BFD_RELOC_PPC_EMB_MRKREF
2470 ENUMX
2471   BFD_RELOC_PPC_EMB_RELSEC16
2472 ENUMX
2473   BFD_RELOC_PPC_EMB_RELST_LO
2474 ENUMX
2475   BFD_RELOC_PPC_EMB_RELST_HI
2476 ENUMX
2477   BFD_RELOC_PPC_EMB_RELST_HA
2478 ENUMX
2479   BFD_RELOC_PPC_EMB_BIT_FLD
2480 ENUMX
2481   BFD_RELOC_PPC_EMB_RELSDA
2482 ENUMX
2483   BFD_RELOC_PPC64_HIGHER
2484 ENUMX
2485   BFD_RELOC_PPC64_HIGHER_S
2486 ENUMX
2487   BFD_RELOC_PPC64_HIGHEST
2488 ENUMX
2489   BFD_RELOC_PPC64_HIGHEST_S
2490 ENUMX
2491   BFD_RELOC_PPC64_TOC16_LO
2492 ENUMX
2493   BFD_RELOC_PPC64_TOC16_HI
2494 ENUMX
2495   BFD_RELOC_PPC64_TOC16_HA
2496 ENUMX
2497   BFD_RELOC_PPC64_TOC
2498 ENUMX
2499   BFD_RELOC_PPC64_PLTGOT16
2500 ENUMX
2501   BFD_RELOC_PPC64_PLTGOT16_LO
2502 ENUMX
2503   BFD_RELOC_PPC64_PLTGOT16_HI
2504 ENUMX
2505   BFD_RELOC_PPC64_PLTGOT16_HA
2506 ENUMX
2507   BFD_RELOC_PPC64_ADDR16_DS
2508 ENUMX
2509   BFD_RELOC_PPC64_ADDR16_LO_DS
2510 ENUMX
2511   BFD_RELOC_PPC64_GOT16_DS
2512 ENUMX
2513   BFD_RELOC_PPC64_GOT16_LO_DS
2514 ENUMX
2515   BFD_RELOC_PPC64_PLT16_LO_DS
2516 ENUMX
2517   BFD_RELOC_PPC64_SECTOFF_DS
2518 ENUMX
2519   BFD_RELOC_PPC64_SECTOFF_LO_DS
2520 ENUMX
2521   BFD_RELOC_PPC64_TOC16_DS
2522 ENUMX
2523   BFD_RELOC_PPC64_TOC16_LO_DS
2524 ENUMX
2525   BFD_RELOC_PPC64_PLTGOT16_DS
2526 ENUMX
2527   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2528 ENUMDOC
2529   Power(rs6000) and PowerPC relocations.
2530
2531 ENUM
2532   BFD_RELOC_PPC_TLS
2533 ENUMX
2534   BFD_RELOC_PPC_DTPMOD
2535 ENUMX
2536   BFD_RELOC_PPC_TPREL16
2537 ENUMX
2538   BFD_RELOC_PPC_TPREL16_LO
2539 ENUMX
2540   BFD_RELOC_PPC_TPREL16_HI
2541 ENUMX
2542   BFD_RELOC_PPC_TPREL16_HA
2543 ENUMX
2544   BFD_RELOC_PPC_TPREL
2545 ENUMX
2546   BFD_RELOC_PPC_DTPREL16
2547 ENUMX
2548   BFD_RELOC_PPC_DTPREL16_LO
2549 ENUMX
2550   BFD_RELOC_PPC_DTPREL16_HI
2551 ENUMX
2552   BFD_RELOC_PPC_DTPREL16_HA
2553 ENUMX
2554   BFD_RELOC_PPC_DTPREL
2555 ENUMX
2556   BFD_RELOC_PPC_GOT_TLSGD16
2557 ENUMX
2558   BFD_RELOC_PPC_GOT_TLSGD16_LO
2559 ENUMX
2560   BFD_RELOC_PPC_GOT_TLSGD16_HI
2561 ENUMX
2562   BFD_RELOC_PPC_GOT_TLSGD16_HA
2563 ENUMX
2564   BFD_RELOC_PPC_GOT_TLSLD16
2565 ENUMX
2566   BFD_RELOC_PPC_GOT_TLSLD16_LO
2567 ENUMX
2568   BFD_RELOC_PPC_GOT_TLSLD16_HI
2569 ENUMX
2570   BFD_RELOC_PPC_GOT_TLSLD16_HA
2571 ENUMX
2572   BFD_RELOC_PPC_GOT_TPREL16
2573 ENUMX
2574   BFD_RELOC_PPC_GOT_TPREL16_LO
2575 ENUMX
2576   BFD_RELOC_PPC_GOT_TPREL16_HI
2577 ENUMX
2578   BFD_RELOC_PPC_GOT_TPREL16_HA
2579 ENUMX
2580   BFD_RELOC_PPC_GOT_DTPREL16
2581 ENUMX
2582   BFD_RELOC_PPC_GOT_DTPREL16_LO
2583 ENUMX
2584   BFD_RELOC_PPC_GOT_DTPREL16_HI
2585 ENUMX
2586   BFD_RELOC_PPC_GOT_DTPREL16_HA
2587 ENUMX
2588   BFD_RELOC_PPC64_TPREL16_DS
2589 ENUMX
2590   BFD_RELOC_PPC64_TPREL16_LO_DS
2591 ENUMX
2592   BFD_RELOC_PPC64_TPREL16_HIGHER
2593 ENUMX
2594   BFD_RELOC_PPC64_TPREL16_HIGHERA
2595 ENUMX
2596   BFD_RELOC_PPC64_TPREL16_HIGHEST
2597 ENUMX
2598   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2599 ENUMX
2600   BFD_RELOC_PPC64_DTPREL16_DS
2601 ENUMX
2602   BFD_RELOC_PPC64_DTPREL16_LO_DS
2603 ENUMX
2604   BFD_RELOC_PPC64_DTPREL16_HIGHER
2605 ENUMX
2606   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2607 ENUMX
2608   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2609 ENUMX
2610   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2611 ENUMDOC
2612   PowerPC and PowerPC64 thread-local storage relocations.
2613
2614 ENUM
2615   BFD_RELOC_I370_D12
2616 ENUMDOC
2617   IBM 370/390 relocations
2618
2619 ENUM
2620   BFD_RELOC_CTOR
2621 ENUMDOC
2622   The type of reloc used to build a constructor table - at the moment
2623   probably a 32 bit wide absolute relocation, but the target can choose.
2624   It generally does map to one of the other relocation types.
2625
2626 ENUM
2627   BFD_RELOC_ARM_PCREL_BRANCH
2628 ENUMDOC
2629   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
2630   not stored in the instruction.
2631 ENUM
2632   BFD_RELOC_ARM_PCREL_BLX
2633 ENUMDOC
2634   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
2635   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2636   field in the instruction.
2637 ENUM
2638   BFD_RELOC_THUMB_PCREL_BLX
2639 ENUMDOC
2640   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
2641   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2642   field in the instruction.
2643 ENUM
2644   BFD_RELOC_ARM_PCREL_CALL
2645 ENUMDOC
2646   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
2647 ENUM
2648   BFD_RELOC_ARM_PCREL_JUMP
2649 ENUMDOC
2650   ARM 26-bit pc-relative branch for B or conditional BL instruction.
2651
2652 ENUM
2653   BFD_RELOC_THUMB_PCREL_BRANCH7
2654 ENUMX
2655   BFD_RELOC_THUMB_PCREL_BRANCH9
2656 ENUMX
2657   BFD_RELOC_THUMB_PCREL_BRANCH12
2658 ENUMX
2659   BFD_RELOC_THUMB_PCREL_BRANCH20
2660 ENUMX
2661   BFD_RELOC_THUMB_PCREL_BRANCH23
2662 ENUMX
2663   BFD_RELOC_THUMB_PCREL_BRANCH25
2664 ENUMDOC
2665   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
2666   The lowest bit must be zero and is not stored in the instruction.
2667   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
2668   "nn" one smaller in all cases.  Note further that BRANCH23
2669   corresponds to R_ARM_THM_CALL.
2670
2671 ENUM
2672   BFD_RELOC_ARM_OFFSET_IMM
2673 ENUMDOC
2674   12-bit immediate offset, used in ARM-format ldr and str instructions.
2675
2676 ENUM
2677   BFD_RELOC_ARM_THUMB_OFFSET
2678 ENUMDOC
2679   5-bit immediate offset, used in Thumb-format ldr and str instructions.
2680
2681 ENUM
2682   BFD_RELOC_ARM_TARGET1
2683 ENUMDOC
2684   Pc-relative or absolute relocation depending on target.  Used for
2685   entries in .init_array sections.
2686 ENUM
2687   BFD_RELOC_ARM_ROSEGREL32
2688 ENUMDOC
2689   Read-only segment base relative address.
2690 ENUM
2691   BFD_RELOC_ARM_SBREL32
2692 ENUMDOC
2693   Data segment base relative address.
2694 ENUM
2695   BFD_RELOC_ARM_TARGET2
2696 ENUMDOC
2697   This reloc is used for references to RTTI data from exception handling
2698   tables.  The actual definition depends on the target.  It may be a
2699   pc-relative or some form of GOT-indirect relocation.
2700 ENUM
2701   BFD_RELOC_ARM_PREL31
2702 ENUMDOC
2703   31-bit PC relative address.
2704 ENUM
2705   BFD_RELOC_ARM_MOVW
2706 ENUMX
2707   BFD_RELOC_ARM_MOVT
2708 ENUMX
2709   BFD_RELOC_ARM_MOVW_PCREL
2710 ENUMX
2711   BFD_RELOC_ARM_MOVT_PCREL
2712 ENUMX
2713   BFD_RELOC_ARM_THUMB_MOVW
2714 ENUMX
2715   BFD_RELOC_ARM_THUMB_MOVT
2716 ENUMX
2717   BFD_RELOC_ARM_THUMB_MOVW_PCREL
2718 ENUMX
2719   BFD_RELOC_ARM_THUMB_MOVT_PCREL
2720 ENUMDOC
2721   Low and High halfword relocations for MOVW and MOVT instructions.
2722
2723 ENUM
2724   BFD_RELOC_ARM_JUMP_SLOT
2725 ENUMX
2726   BFD_RELOC_ARM_GLOB_DAT
2727 ENUMX
2728   BFD_RELOC_ARM_GOT32
2729 ENUMX
2730   BFD_RELOC_ARM_PLT32
2731 ENUMX
2732   BFD_RELOC_ARM_RELATIVE
2733 ENUMX
2734   BFD_RELOC_ARM_GOTOFF
2735 ENUMX
2736   BFD_RELOC_ARM_GOTPC
2737 ENUMDOC
2738   Relocations for setting up GOTs and PLTs for shared libraries.
2739
2740 ENUM
2741   BFD_RELOC_ARM_TLS_GD32
2742 ENUMX
2743   BFD_RELOC_ARM_TLS_LDO32
2744 ENUMX
2745   BFD_RELOC_ARM_TLS_LDM32
2746 ENUMX
2747   BFD_RELOC_ARM_TLS_DTPOFF32
2748 ENUMX
2749   BFD_RELOC_ARM_TLS_DTPMOD32
2750 ENUMX
2751   BFD_RELOC_ARM_TLS_TPOFF32
2752 ENUMX
2753   BFD_RELOC_ARM_TLS_IE32
2754 ENUMX
2755   BFD_RELOC_ARM_TLS_LE32
2756 ENUMDOC
2757   ARM thread-local storage relocations.
2758
2759 ENUM
2760   BFD_RELOC_ARM_IMMEDIATE
2761 ENUMX
2762   BFD_RELOC_ARM_ADRL_IMMEDIATE
2763 ENUMX
2764   BFD_RELOC_ARM_T32_IMMEDIATE
2765 ENUMX
2766   BFD_RELOC_ARM_T32_IMM12
2767 ENUMX
2768   BFD_RELOC_ARM_T32_ADD_PC12
2769 ENUMX
2770   BFD_RELOC_ARM_SHIFT_IMM
2771 ENUMX
2772   BFD_RELOC_ARM_SMC
2773 ENUMX
2774   BFD_RELOC_ARM_SWI
2775 ENUMX
2776   BFD_RELOC_ARM_MULTI
2777 ENUMX
2778   BFD_RELOC_ARM_CP_OFF_IMM
2779 ENUMX
2780   BFD_RELOC_ARM_CP_OFF_IMM_S2
2781 ENUMX
2782   BFD_RELOC_ARM_T32_CP_OFF_IMM
2783 ENUMX
2784   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
2785 ENUMX
2786   BFD_RELOC_ARM_ADR_IMM
2787 ENUMX
2788   BFD_RELOC_ARM_LDR_IMM
2789 ENUMX
2790   BFD_RELOC_ARM_LITERAL
2791 ENUMX
2792   BFD_RELOC_ARM_IN_POOL
2793 ENUMX
2794   BFD_RELOC_ARM_OFFSET_IMM8
2795 ENUMX
2796   BFD_RELOC_ARM_T32_OFFSET_U8
2797 ENUMX
2798   BFD_RELOC_ARM_T32_OFFSET_IMM
2799 ENUMX
2800   BFD_RELOC_ARM_HWLITERAL
2801 ENUMX
2802   BFD_RELOC_ARM_THUMB_ADD
2803 ENUMX
2804   BFD_RELOC_ARM_THUMB_IMM
2805 ENUMX
2806   BFD_RELOC_ARM_THUMB_SHIFT
2807 ENUMDOC
2808   These relocs are only used within the ARM assembler.  They are not
2809   (at present) written to any object files.
2810
2811 ENUM
2812   BFD_RELOC_SH_PCDISP8BY2
2813 ENUMX
2814   BFD_RELOC_SH_PCDISP12BY2
2815 ENUMX
2816   BFD_RELOC_SH_IMM3
2817 ENUMX
2818   BFD_RELOC_SH_IMM3U
2819 ENUMX
2820   BFD_RELOC_SH_DISP12
2821 ENUMX
2822   BFD_RELOC_SH_DISP12BY2
2823 ENUMX
2824   BFD_RELOC_SH_DISP12BY4
2825 ENUMX
2826   BFD_RELOC_SH_DISP12BY8
2827 ENUMX
2828   BFD_RELOC_SH_DISP20
2829 ENUMX
2830   BFD_RELOC_SH_DISP20BY8
2831 ENUMX
2832   BFD_RELOC_SH_IMM4
2833 ENUMX
2834   BFD_RELOC_SH_IMM4BY2
2835 ENUMX
2836   BFD_RELOC_SH_IMM4BY4
2837 ENUMX
2838   BFD_RELOC_SH_IMM8
2839 ENUMX
2840   BFD_RELOC_SH_IMM8BY2
2841 ENUMX
2842   BFD_RELOC_SH_IMM8BY4
2843 ENUMX
2844   BFD_RELOC_SH_PCRELIMM8BY2
2845 ENUMX
2846   BFD_RELOC_SH_PCRELIMM8BY4
2847 ENUMX
2848   BFD_RELOC_SH_SWITCH16
2849 ENUMX
2850   BFD_RELOC_SH_SWITCH32
2851 ENUMX
2852   BFD_RELOC_SH_USES
2853 ENUMX
2854   BFD_RELOC_SH_COUNT
2855 ENUMX
2856   BFD_RELOC_SH_ALIGN
2857 ENUMX
2858   BFD_RELOC_SH_CODE
2859 ENUMX
2860   BFD_RELOC_SH_DATA
2861 ENUMX
2862   BFD_RELOC_SH_LABEL
2863 ENUMX
2864   BFD_RELOC_SH_LOOP_START
2865 ENUMX
2866   BFD_RELOC_SH_LOOP_END
2867 ENUMX
2868   BFD_RELOC_SH_COPY
2869 ENUMX
2870   BFD_RELOC_SH_GLOB_DAT
2871 ENUMX
2872   BFD_RELOC_SH_JMP_SLOT
2873 ENUMX
2874   BFD_RELOC_SH_RELATIVE
2875 ENUMX
2876   BFD_RELOC_SH_GOTPC
2877 ENUMX
2878   BFD_RELOC_SH_GOT_LOW16
2879 ENUMX
2880   BFD_RELOC_SH_GOT_MEDLOW16
2881 ENUMX
2882   BFD_RELOC_SH_GOT_MEDHI16
2883 ENUMX
2884   BFD_RELOC_SH_GOT_HI16
2885 ENUMX
2886   BFD_RELOC_SH_GOTPLT_LOW16
2887 ENUMX
2888   BFD_RELOC_SH_GOTPLT_MEDLOW16
2889 ENUMX
2890   BFD_RELOC_SH_GOTPLT_MEDHI16
2891 ENUMX
2892   BFD_RELOC_SH_GOTPLT_HI16
2893 ENUMX
2894   BFD_RELOC_SH_PLT_LOW16
2895 ENUMX
2896   BFD_RELOC_SH_PLT_MEDLOW16
2897 ENUMX
2898   BFD_RELOC_SH_PLT_MEDHI16
2899 ENUMX
2900   BFD_RELOC_SH_PLT_HI16
2901 ENUMX
2902   BFD_RELOC_SH_GOTOFF_LOW16
2903 ENUMX
2904   BFD_RELOC_SH_GOTOFF_MEDLOW16
2905 ENUMX
2906   BFD_RELOC_SH_GOTOFF_MEDHI16
2907 ENUMX
2908   BFD_RELOC_SH_GOTOFF_HI16
2909 ENUMX
2910   BFD_RELOC_SH_GOTPC_LOW16
2911 ENUMX
2912   BFD_RELOC_SH_GOTPC_MEDLOW16
2913 ENUMX
2914   BFD_RELOC_SH_GOTPC_MEDHI16
2915 ENUMX
2916   BFD_RELOC_SH_GOTPC_HI16
2917 ENUMX
2918   BFD_RELOC_SH_COPY64
2919 ENUMX
2920   BFD_RELOC_SH_GLOB_DAT64
2921 ENUMX
2922   BFD_RELOC_SH_JMP_SLOT64
2923 ENUMX
2924   BFD_RELOC_SH_RELATIVE64
2925 ENUMX
2926   BFD_RELOC_SH_GOT10BY4
2927 ENUMX
2928   BFD_RELOC_SH_GOT10BY8
2929 ENUMX
2930   BFD_RELOC_SH_GOTPLT10BY4
2931 ENUMX
2932   BFD_RELOC_SH_GOTPLT10BY8
2933 ENUMX
2934   BFD_RELOC_SH_GOTPLT32
2935 ENUMX
2936   BFD_RELOC_SH_SHMEDIA_CODE
2937 ENUMX
2938   BFD_RELOC_SH_IMMU5
2939 ENUMX
2940   BFD_RELOC_SH_IMMS6
2941 ENUMX
2942   BFD_RELOC_SH_IMMS6BY32
2943 ENUMX
2944   BFD_RELOC_SH_IMMU6
2945 ENUMX
2946   BFD_RELOC_SH_IMMS10
2947 ENUMX
2948   BFD_RELOC_SH_IMMS10BY2
2949 ENUMX
2950   BFD_RELOC_SH_IMMS10BY4
2951 ENUMX
2952   BFD_RELOC_SH_IMMS10BY8
2953 ENUMX
2954   BFD_RELOC_SH_IMMS16
2955 ENUMX
2956   BFD_RELOC_SH_IMMU16
2957 ENUMX
2958   BFD_RELOC_SH_IMM_LOW16
2959 ENUMX
2960   BFD_RELOC_SH_IMM_LOW16_PCREL
2961 ENUMX
2962   BFD_RELOC_SH_IMM_MEDLOW16
2963 ENUMX
2964   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
2965 ENUMX
2966   BFD_RELOC_SH_IMM_MEDHI16
2967 ENUMX
2968   BFD_RELOC_SH_IMM_MEDHI16_PCREL
2969 ENUMX
2970   BFD_RELOC_SH_IMM_HI16
2971 ENUMX
2972   BFD_RELOC_SH_IMM_HI16_PCREL
2973 ENUMX
2974   BFD_RELOC_SH_PT_16
2975 ENUMX
2976   BFD_RELOC_SH_TLS_GD_32
2977 ENUMX
2978   BFD_RELOC_SH_TLS_LD_32
2979 ENUMX
2980   BFD_RELOC_SH_TLS_LDO_32
2981 ENUMX
2982   BFD_RELOC_SH_TLS_IE_32
2983 ENUMX
2984   BFD_RELOC_SH_TLS_LE_32
2985 ENUMX
2986   BFD_RELOC_SH_TLS_DTPMOD32
2987 ENUMX
2988   BFD_RELOC_SH_TLS_DTPOFF32
2989 ENUMX
2990   BFD_RELOC_SH_TLS_TPOFF32
2991 ENUMDOC
2992   Renesas / SuperH SH relocs.  Not all of these appear in object files.
2993
2994 ENUM
2995   BFD_RELOC_ARC_B22_PCREL
2996 ENUMDOC
2997   ARC Cores relocs.
2998   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
2999   not stored in the instruction.  The high 20 bits are installed in bits 26
3000   through 7 of the instruction.
3001 ENUM
3002   BFD_RELOC_ARC_B26
3003 ENUMDOC
3004   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3005   stored in the instruction.  The high 24 bits are installed in bits 23
3006   through 0.
3007
3008 ENUM
3009   BFD_RELOC_BFIN_16_IMM
3010 ENUMDOC
3011   ADI Blackfin 16 bit immediate absolute reloc.
3012 ENUM
3013   BFD_RELOC_BFIN_16_HIGH
3014 ENUMDOC
3015   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3016 ENUM
3017   BFD_RELOC_BFIN_4_PCREL
3018 ENUMDOC
3019   ADI Blackfin 'a' part of LSETUP.
3020 ENUM
3021   BFD_RELOC_BFIN_5_PCREL
3022 ENUMDOC
3023   ADI Blackfin.
3024 ENUM
3025   BFD_RELOC_BFIN_16_LOW
3026 ENUMDOC
3027   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3028 ENUM
3029   BFD_RELOC_BFIN_10_PCREL
3030 ENUMDOC
3031   ADI Blackfin.
3032 ENUM
3033   BFD_RELOC_BFIN_11_PCREL
3034 ENUMDOC
3035   ADI Blackfin 'b' part of LSETUP.
3036 ENUM
3037   BFD_RELOC_BFIN_12_PCREL_JUMP
3038 ENUMDOC
3039   ADI Blackfin.
3040 ENUM
3041   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3042 ENUMDOC
3043   ADI Blackfin Short jump, pcrel.
3044 ENUM
3045   BFD_RELOC_BFIN_24_PCREL_CALL_X
3046 ENUMDOC
3047   ADI Blackfin Call.x not implemented.
3048 ENUM
3049   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3050 ENUMDOC
3051   ADI Blackfin Long Jump pcrel.
3052 ENUM
3053   BFD_RELOC_BFIN_GOT17M4
3054 ENUMX
3055   BFD_RELOC_BFIN_GOTHI
3056 ENUMX
3057   BFD_RELOC_BFIN_GOTLO
3058 ENUMX
3059   BFD_RELOC_BFIN_FUNCDESC
3060 ENUMX
3061   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3062 ENUMX
3063   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3064 ENUMX
3065   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3066 ENUMX
3067   BFD_RELOC_BFIN_FUNCDESC_VALUE
3068 ENUMX
3069   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3070 ENUMX
3071   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3072 ENUMX
3073   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3074 ENUMX
3075   BFD_RELOC_BFIN_GOTOFF17M4
3076 ENUMX
3077   BFD_RELOC_BFIN_GOTOFFHI
3078 ENUMX
3079   BFD_RELOC_BFIN_GOTOFFLO
3080 ENUMDOC
3081   ADI Blackfin FD-PIC relocations.
3082 ENUM
3083   BFD_RELOC_BFIN_GOT
3084 ENUMDOC
3085   ADI Blackfin GOT relocation.
3086 ENUM
3087   BFD_RELOC_BFIN_PLTPC
3088 ENUMDOC
3089   ADI Blackfin PLTPC relocation.
3090 ENUM
3091   BFD_ARELOC_BFIN_PUSH
3092 ENUMDOC
3093   ADI Blackfin arithmetic relocation.
3094 ENUM
3095   BFD_ARELOC_BFIN_CONST
3096 ENUMDOC
3097   ADI Blackfin arithmetic relocation.
3098 ENUM
3099   BFD_ARELOC_BFIN_ADD
3100 ENUMDOC
3101   ADI Blackfin arithmetic relocation.
3102 ENUM
3103   BFD_ARELOC_BFIN_SUB
3104 ENUMDOC
3105   ADI Blackfin arithmetic relocation.
3106 ENUM
3107   BFD_ARELOC_BFIN_MULT
3108 ENUMDOC
3109   ADI Blackfin arithmetic relocation.
3110 ENUM
3111   BFD_ARELOC_BFIN_DIV
3112 ENUMDOC
3113   ADI Blackfin arithmetic relocation.
3114 ENUM
3115   BFD_ARELOC_BFIN_MOD
3116 ENUMDOC
3117   ADI Blackfin arithmetic relocation.
3118 ENUM
3119   BFD_ARELOC_BFIN_LSHIFT
3120 ENUMDOC
3121   ADI Blackfin arithmetic relocation.
3122 ENUM
3123   BFD_ARELOC_BFIN_RSHIFT
3124 ENUMDOC
3125   ADI Blackfin arithmetic relocation.
3126 ENUM
3127   BFD_ARELOC_BFIN_AND
3128 ENUMDOC
3129   ADI Blackfin arithmetic relocation.
3130 ENUM
3131   BFD_ARELOC_BFIN_OR
3132 ENUMDOC
3133   ADI Blackfin arithmetic relocation.
3134 ENUM
3135   BFD_ARELOC_BFIN_XOR
3136 ENUMDOC
3137   ADI Blackfin arithmetic relocation.
3138 ENUM
3139   BFD_ARELOC_BFIN_LAND
3140 ENUMDOC
3141   ADI Blackfin arithmetic relocation.
3142 ENUM
3143   BFD_ARELOC_BFIN_LOR
3144 ENUMDOC
3145   ADI Blackfin arithmetic relocation.
3146 ENUM
3147   BFD_ARELOC_BFIN_LEN
3148 ENUMDOC
3149   ADI Blackfin arithmetic relocation.
3150 ENUM
3151   BFD_ARELOC_BFIN_NEG
3152 ENUMDOC
3153   ADI Blackfin arithmetic relocation.
3154 ENUM
3155   BFD_ARELOC_BFIN_COMP
3156 ENUMDOC
3157   ADI Blackfin arithmetic relocation.
3158 ENUM
3159   BFD_ARELOC_BFIN_PAGE
3160 ENUMDOC
3161   ADI Blackfin arithmetic relocation.
3162 ENUM
3163   BFD_ARELOC_BFIN_HWPAGE
3164 ENUMDOC
3165   ADI Blackfin arithmetic relocation.
3166 ENUM
3167   BFD_ARELOC_BFIN_ADDR
3168 ENUMDOC
3169   ADI Blackfin arithmetic relocation.
3170
3171 ENUM
3172   BFD_RELOC_D10V_10_PCREL_R
3173 ENUMDOC
3174   Mitsubishi D10V relocs.
3175   This is a 10-bit reloc with the right 2 bits
3176   assumed to be 0.
3177 ENUM
3178   BFD_RELOC_D10V_10_PCREL_L
3179 ENUMDOC
3180   Mitsubishi D10V relocs.
3181   This is a 10-bit reloc with the right 2 bits
3182   assumed to be 0.  This is the same as the previous reloc
3183   except it is in the left container, i.e.,
3184   shifted left 15 bits.
3185 ENUM
3186   BFD_RELOC_D10V_18
3187 ENUMDOC
3188   This is an 18-bit reloc with the right 2 bits
3189   assumed to be 0.
3190 ENUM
3191   BFD_RELOC_D10V_18_PCREL
3192 ENUMDOC
3193   This is an 18-bit reloc with the right 2 bits
3194   assumed to be 0.
3195
3196 ENUM
3197   BFD_RELOC_D30V_6
3198 ENUMDOC
3199   Mitsubishi D30V relocs.
3200   This is a 6-bit absolute reloc.
3201 ENUM
3202   BFD_RELOC_D30V_9_PCREL
3203 ENUMDOC
3204   This is a 6-bit pc-relative reloc with
3205   the right 3 bits assumed to be 0.
3206 ENUM
3207   BFD_RELOC_D30V_9_PCREL_R
3208 ENUMDOC
3209   This is a 6-bit pc-relative reloc with
3210   the right 3 bits assumed to be 0. Same
3211   as the previous reloc but on the right side
3212   of the container.
3213 ENUM
3214   BFD_RELOC_D30V_15
3215 ENUMDOC
3216   This is a 12-bit absolute reloc with the
3217   right 3 bitsassumed to be 0.
3218 ENUM
3219   BFD_RELOC_D30V_15_PCREL
3220 ENUMDOC
3221   This is a 12-bit pc-relative reloc with
3222   the right 3 bits assumed to be 0.
3223 ENUM
3224   BFD_RELOC_D30V_15_PCREL_R
3225 ENUMDOC
3226   This is a 12-bit pc-relative reloc with
3227   the right 3 bits assumed to be 0. Same
3228   as the previous reloc but on the right side
3229   of the container.
3230 ENUM
3231   BFD_RELOC_D30V_21
3232 ENUMDOC
3233   This is an 18-bit absolute reloc with
3234   the right 3 bits assumed to be 0.
3235 ENUM
3236   BFD_RELOC_D30V_21_PCREL
3237 ENUMDOC
3238   This is an 18-bit pc-relative reloc with
3239   the right 3 bits assumed to be 0.
3240 ENUM
3241   BFD_RELOC_D30V_21_PCREL_R
3242 ENUMDOC
3243   This is an 18-bit pc-relative reloc with
3244   the right 3 bits assumed to be 0. Same
3245   as the previous reloc but on the right side
3246   of the container.
3247 ENUM
3248   BFD_RELOC_D30V_32
3249 ENUMDOC
3250   This is a 32-bit absolute reloc.
3251 ENUM
3252   BFD_RELOC_D30V_32_PCREL
3253 ENUMDOC
3254   This is a 32-bit pc-relative reloc.
3255
3256 ENUM
3257   BFD_RELOC_DLX_HI16_S
3258 ENUMDOC
3259   DLX relocs
3260 ENUM
3261   BFD_RELOC_DLX_LO16
3262 ENUMDOC
3263   DLX relocs
3264 ENUM
3265   BFD_RELOC_DLX_JMP26
3266 ENUMDOC
3267   DLX relocs
3268
3269 ENUM
3270   BFD_RELOC_M32C_HI8
3271 ENUMX
3272   BFD_RELOC_M32C_RL_JUMP
3273 ENUMX
3274   BFD_RELOC_M32C_RL_1ADDR
3275 ENUMX
3276   BFD_RELOC_M32C_RL_2ADDR
3277 ENUMDOC
3278   Renesas M16C/M32C Relocations.
3279
3280 ENUM
3281   BFD_RELOC_M32R_24
3282 ENUMDOC
3283   Renesas M32R (formerly Mitsubishi M32R) relocs.
3284   This is a 24 bit absolute address.
3285 ENUM
3286   BFD_RELOC_M32R_10_PCREL
3287 ENUMDOC
3288   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3289 ENUM
3290   BFD_RELOC_M32R_18_PCREL
3291 ENUMDOC
3292   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3293 ENUM
3294   BFD_RELOC_M32R_26_PCREL
3295 ENUMDOC
3296   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3297 ENUM
3298   BFD_RELOC_M32R_HI16_ULO
3299 ENUMDOC
3300   This is a 16-bit reloc containing the high 16 bits of an address
3301   used when the lower 16 bits are treated as unsigned.
3302 ENUM
3303   BFD_RELOC_M32R_HI16_SLO
3304 ENUMDOC
3305   This is a 16-bit reloc containing the high 16 bits of an address
3306   used when the lower 16 bits are treated as signed.
3307 ENUM
3308   BFD_RELOC_M32R_LO16
3309 ENUMDOC
3310   This is a 16-bit reloc containing the lower 16 bits of an address.
3311 ENUM
3312   BFD_RELOC_M32R_SDA16
3313 ENUMDOC
3314   This is a 16-bit reloc containing the small data area offset for use in
3315   add3, load, and store instructions.
3316 ENUM
3317   BFD_RELOC_M32R_GOT24
3318 ENUMX
3319   BFD_RELOC_M32R_26_PLTREL
3320 ENUMX
3321   BFD_RELOC_M32R_COPY
3322 ENUMX
3323   BFD_RELOC_M32R_GLOB_DAT
3324 ENUMX
3325   BFD_RELOC_M32R_JMP_SLOT
3326 ENUMX
3327   BFD_RELOC_M32R_RELATIVE
3328 ENUMX
3329   BFD_RELOC_M32R_GOTOFF
3330 ENUMX
3331   BFD_RELOC_M32R_GOTOFF_HI_ULO
3332 ENUMX
3333   BFD_RELOC_M32R_GOTOFF_HI_SLO
3334 ENUMX
3335   BFD_RELOC_M32R_GOTOFF_LO
3336 ENUMX
3337   BFD_RELOC_M32R_GOTPC24
3338 ENUMX
3339   BFD_RELOC_M32R_GOT16_HI_ULO
3340 ENUMX
3341   BFD_RELOC_M32R_GOT16_HI_SLO
3342 ENUMX
3343   BFD_RELOC_M32R_GOT16_LO
3344 ENUMX
3345   BFD_RELOC_M32R_GOTPC_HI_ULO
3346 ENUMX
3347   BFD_RELOC_M32R_GOTPC_HI_SLO
3348 ENUMX
3349   BFD_RELOC_M32R_GOTPC_LO
3350 ENUMDOC
3351   For PIC.
3352
3353
3354 ENUM
3355   BFD_RELOC_V850_9_PCREL
3356 ENUMDOC
3357   This is a 9-bit reloc
3358 ENUM
3359   BFD_RELOC_V850_22_PCREL
3360 ENUMDOC
3361   This is a 22-bit reloc
3362
3363 ENUM
3364   BFD_RELOC_V850_SDA_16_16_OFFSET
3365 ENUMDOC
3366   This is a 16 bit offset from the short data area pointer.
3367 ENUM
3368   BFD_RELOC_V850_SDA_15_16_OFFSET
3369 ENUMDOC
3370   This is a 16 bit offset (of which only 15 bits are used) from the
3371   short data area pointer.
3372 ENUM
3373   BFD_RELOC_V850_ZDA_16_16_OFFSET
3374 ENUMDOC
3375   This is a 16 bit offset from the zero data area pointer.
3376 ENUM
3377   BFD_RELOC_V850_ZDA_15_16_OFFSET
3378 ENUMDOC
3379   This is a 16 bit offset (of which only 15 bits are used) from the
3380   zero data area pointer.
3381 ENUM
3382   BFD_RELOC_V850_TDA_6_8_OFFSET
3383 ENUMDOC
3384   This is an 8 bit offset (of which only 6 bits are used) from the
3385   tiny data area pointer.
3386 ENUM
3387   BFD_RELOC_V850_TDA_7_8_OFFSET
3388 ENUMDOC
3389   This is an 8bit offset (of which only 7 bits are used) from the tiny
3390   data area pointer.
3391 ENUM
3392   BFD_RELOC_V850_TDA_7_7_OFFSET
3393 ENUMDOC
3394   This is a 7 bit offset from the tiny data area pointer.
3395 ENUM
3396   BFD_RELOC_V850_TDA_16_16_OFFSET
3397 ENUMDOC
3398   This is a 16 bit offset from the tiny data area pointer.
3399 COMMENT
3400 ENUM
3401   BFD_RELOC_V850_TDA_4_5_OFFSET
3402 ENUMDOC
3403   This is a 5 bit offset (of which only 4 bits are used) from the tiny
3404   data area pointer.
3405 ENUM
3406   BFD_RELOC_V850_TDA_4_4_OFFSET
3407 ENUMDOC
3408   This is a 4 bit offset from the tiny data area pointer.
3409 ENUM
3410   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3411 ENUMDOC
3412   This is a 16 bit offset from the short data area pointer, with the
3413   bits placed non-contiguously in the instruction.
3414 ENUM
3415   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3416 ENUMDOC
3417   This is a 16 bit offset from the zero data area pointer, with the
3418   bits placed non-contiguously in the instruction.
3419 ENUM
3420   BFD_RELOC_V850_CALLT_6_7_OFFSET
3421 ENUMDOC
3422   This is a 6 bit offset from the call table base pointer.
3423 ENUM
3424   BFD_RELOC_V850_CALLT_16_16_OFFSET
3425 ENUMDOC
3426   This is a 16 bit offset from the call table base pointer.
3427 ENUM
3428   BFD_RELOC_V850_LONGCALL
3429 ENUMDOC
3430   Used for relaxing indirect function calls.
3431 ENUM
3432   BFD_RELOC_V850_LONGJUMP
3433 ENUMDOC
3434   Used for relaxing indirect jumps.
3435 ENUM
3436   BFD_RELOC_V850_ALIGN
3437 ENUMDOC
3438   Used to maintain alignment whilst relaxing.
3439 ENUM
3440   BFD_RELOC_V850_LO16_SPLIT_OFFSET
3441 ENUMDOC
3442   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3443   instructions.
3444 ENUM
3445   BFD_RELOC_MN10300_32_PCREL
3446 ENUMDOC
3447   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
3448   instruction.
3449 ENUM
3450   BFD_RELOC_MN10300_16_PCREL
3451 ENUMDOC
3452   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
3453   instruction.
3454
3455 ENUM
3456   BFD_RELOC_TIC30_LDP
3457 ENUMDOC
3458   This is a 8bit DP reloc for the tms320c30, where the most
3459   significant 8 bits of a 24 bit word are placed into the least
3460   significant 8 bits of the opcode.
3461
3462 ENUM
3463   BFD_RELOC_TIC54X_PARTLS7
3464 ENUMDOC
3465   This is a 7bit reloc for the tms320c54x, where the least
3466   significant 7 bits of a 16 bit word are placed into the least
3467   significant 7 bits of the opcode.
3468
3469 ENUM
3470   BFD_RELOC_TIC54X_PARTMS9
3471 ENUMDOC
3472   This is a 9bit DP reloc for the tms320c54x, where the most
3473   significant 9 bits of a 16 bit word are placed into the least
3474   significant 9 bits of the opcode.
3475
3476 ENUM
3477   BFD_RELOC_TIC54X_23
3478 ENUMDOC
3479   This is an extended address 23-bit reloc for the tms320c54x.
3480
3481 ENUM
3482   BFD_RELOC_TIC54X_16_OF_23
3483 ENUMDOC
3484   This is a 16-bit reloc for the tms320c54x, where the least
3485   significant 16 bits of a 23-bit extended address are placed into
3486   the opcode.
3487
3488 ENUM
3489   BFD_RELOC_TIC54X_MS7_OF_23
3490 ENUMDOC
3491   This is a reloc for the tms320c54x, where the most
3492   significant 7 bits of a 23-bit extended address are placed into
3493   the opcode.
3494
3495 ENUM
3496   BFD_RELOC_FR30_48
3497 ENUMDOC
3498   This is a 48 bit reloc for the FR30 that stores 32 bits.
3499 ENUM
3500   BFD_RELOC_FR30_20
3501 ENUMDOC
3502   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
3503   two sections.
3504 ENUM
3505   BFD_RELOC_FR30_6_IN_4
3506 ENUMDOC
3507   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
3508   4 bits.
3509 ENUM
3510   BFD_RELOC_FR30_8_IN_8
3511 ENUMDOC
3512   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
3513   into 8 bits.
3514 ENUM
3515   BFD_RELOC_FR30_9_IN_8
3516 ENUMDOC
3517   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
3518   into 8 bits.
3519 ENUM
3520   BFD_RELOC_FR30_10_IN_8
3521 ENUMDOC
3522   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
3523   into 8 bits.
3524 ENUM
3525   BFD_RELOC_FR30_9_PCREL
3526 ENUMDOC
3527   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
3528   short offset into 8 bits.
3529 ENUM
3530   BFD_RELOC_FR30_12_PCREL
3531 ENUMDOC
3532   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
3533   short offset into 11 bits.
3534
3535 ENUM
3536   BFD_RELOC_MCORE_PCREL_IMM8BY4
3537 ENUMX
3538   BFD_RELOC_MCORE_PCREL_IMM11BY2
3539 ENUMX
3540   BFD_RELOC_MCORE_PCREL_IMM4BY2
3541 ENUMX
3542   BFD_RELOC_MCORE_PCREL_32
3543 ENUMX
3544   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
3545 ENUMX
3546   BFD_RELOC_MCORE_RVA
3547 ENUMDOC
3548   Motorola Mcore relocations.
3549
3550 ENUM
3551   BFD_RELOC_MMIX_GETA
3552 ENUMX
3553   BFD_RELOC_MMIX_GETA_1
3554 ENUMX
3555   BFD_RELOC_MMIX_GETA_2
3556 ENUMX
3557   BFD_RELOC_MMIX_GETA_3
3558 ENUMDOC
3559   These are relocations for the GETA instruction.
3560 ENUM
3561   BFD_RELOC_MMIX_CBRANCH
3562 ENUMX
3563   BFD_RELOC_MMIX_CBRANCH_J
3564 ENUMX
3565   BFD_RELOC_MMIX_CBRANCH_1
3566 ENUMX
3567   BFD_RELOC_MMIX_CBRANCH_2
3568 ENUMX
3569   BFD_RELOC_MMIX_CBRANCH_3
3570 ENUMDOC
3571   These are relocations for a conditional branch instruction.
3572 ENUM
3573   BFD_RELOC_MMIX_PUSHJ
3574 ENUMX
3575   BFD_RELOC_MMIX_PUSHJ_1
3576 ENUMX
3577   BFD_RELOC_MMIX_PUSHJ_2
3578 ENUMX
3579   BFD_RELOC_MMIX_PUSHJ_3
3580 ENUMX
3581   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
3582 ENUMDOC
3583   These are relocations for the PUSHJ instruction.
3584 ENUM
3585   BFD_RELOC_MMIX_JMP
3586 ENUMX
3587   BFD_RELOC_MMIX_JMP_1
3588 ENUMX
3589   BFD_RELOC_MMIX_JMP_2
3590 ENUMX
3591   BFD_RELOC_MMIX_JMP_3
3592 ENUMDOC
3593   These are relocations for the JMP instruction.
3594 ENUM
3595   BFD_RELOC_MMIX_ADDR19
3596 ENUMDOC
3597   This is a relocation for a relative address as in a GETA instruction or
3598   a branch.
3599 ENUM
3600   BFD_RELOC_MMIX_ADDR27
3601 ENUMDOC
3602   This is a relocation for a relative address as in a JMP instruction.
3603 ENUM
3604   BFD_RELOC_MMIX_REG_OR_BYTE
3605 ENUMDOC
3606   This is a relocation for an instruction field that may be a general
3607   register or a value 0..255.
3608 ENUM
3609   BFD_RELOC_MMIX_REG
3610 ENUMDOC
3611   This is a relocation for an instruction field that may be a general
3612   register.
3613 ENUM
3614   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
3615 ENUMDOC
3616   This is a relocation for two instruction fields holding a register and
3617   an offset, the equivalent of the relocation.
3618 ENUM
3619   BFD_RELOC_MMIX_LOCAL
3620 ENUMDOC
3621   This relocation is an assertion that the expression is not allocated as
3622   a global register.  It does not modify contents.
3623
3624 ENUM
3625   BFD_RELOC_AVR_7_PCREL
3626 ENUMDOC
3627   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
3628   short offset into 7 bits.
3629 ENUM
3630   BFD_RELOC_AVR_13_PCREL
3631 ENUMDOC
3632   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
3633   short offset into 12 bits.
3634 ENUM
3635   BFD_RELOC_AVR_16_PM
3636 ENUMDOC
3637   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
3638   program memory address) into 16 bits.
3639 ENUM
3640   BFD_RELOC_AVR_LO8_LDI
3641 ENUMDOC
3642   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3643   data memory address) into 8 bit immediate value of LDI insn.
3644 ENUM
3645   BFD_RELOC_AVR_HI8_LDI
3646 ENUMDOC
3647   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3648   of data memory address) into 8 bit immediate value of LDI insn.
3649 ENUM
3650   BFD_RELOC_AVR_HH8_LDI
3651 ENUMDOC
3652   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3653   of program memory address) into 8 bit immediate value of LDI insn.
3654 ENUM
3655   BFD_RELOC_AVR_MS8_LDI
3656 ENUMDOC
3657   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3658   of 32 bit value) into 8 bit immediate value of LDI insn.
3659 ENUM
3660   BFD_RELOC_AVR_LO8_LDI_NEG
3661 ENUMDOC
3662   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3663   (usually data memory address) into 8 bit immediate value of SUBI insn.
3664 ENUM
3665   BFD_RELOC_AVR_HI8_LDI_NEG
3666 ENUMDOC
3667   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3668   (high 8 bit of data memory address) into 8 bit immediate value of
3669   SUBI insn.
3670 ENUM
3671   BFD_RELOC_AVR_HH8_LDI_NEG
3672 ENUMDOC
3673   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3674   (most high 8 bit of program memory address) into 8 bit immediate value
3675   of LDI or SUBI insn.
3676 ENUM
3677   BFD_RELOC_AVR_MS8_LDI_NEG
3678 ENUMDOC
3679   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
3680   of 32 bit value) into 8 bit immediate value of LDI insn.
3681 ENUM
3682   BFD_RELOC_AVR_LO8_LDI_PM
3683 ENUMDOC
3684   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3685   command address) into 8 bit immediate value of LDI insn.
3686 ENUM
3687   BFD_RELOC_AVR_HI8_LDI_PM
3688 ENUMDOC
3689   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3690   of command address) into 8 bit immediate value of LDI insn.
3691 ENUM
3692   BFD_RELOC_AVR_HH8_LDI_PM
3693 ENUMDOC
3694   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3695   of command address) into 8 bit immediate value of LDI insn.
3696 ENUM
3697   BFD_RELOC_AVR_LO8_LDI_PM_NEG
3698 ENUMDOC
3699   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3700   (usually command address) into 8 bit immediate value of SUBI insn.
3701 ENUM
3702   BFD_RELOC_AVR_HI8_LDI_PM_NEG
3703 ENUMDOC
3704   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3705   (high 8 bit of 16 bit command address) into 8 bit immediate value
3706   of SUBI insn.
3707 ENUM
3708   BFD_RELOC_AVR_HH8_LDI_PM_NEG
3709 ENUMDOC
3710   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3711   (high 6 bit of 22 bit command address) into 8 bit immediate
3712   value of SUBI insn.
3713 ENUM
3714   BFD_RELOC_AVR_CALL
3715 ENUMDOC
3716   This is a 32 bit reloc for the AVR that stores 23 bit value
3717   into 22 bits.
3718 ENUM
3719   BFD_RELOC_AVR_LDI
3720 ENUMDOC
3721   This is a 16 bit reloc for the AVR that stores all needed bits
3722   for absolute addressing with ldi with overflow check to linktime
3723 ENUM
3724   BFD_RELOC_AVR_6
3725 ENUMDOC
3726   This is a 6 bit reloc for the AVR that stores offset for ldd/std
3727   instructions
3728 ENUM
3729   BFD_RELOC_AVR_6_ADIW
3730 ENUMDOC
3731   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
3732   instructions
3733
3734 ENUM
3735   BFD_RELOC_390_12
3736 ENUMDOC
3737    Direct 12 bit.
3738 ENUM
3739   BFD_RELOC_390_GOT12
3740 ENUMDOC
3741   12 bit GOT offset.
3742 ENUM
3743   BFD_RELOC_390_PLT32
3744 ENUMDOC
3745   32 bit PC relative PLT address.
3746 ENUM
3747   BFD_RELOC_390_COPY
3748 ENUMDOC
3749   Copy symbol at runtime.
3750 ENUM
3751   BFD_RELOC_390_GLOB_DAT
3752 ENUMDOC
3753   Create GOT entry.
3754 ENUM
3755   BFD_RELOC_390_JMP_SLOT
3756 ENUMDOC
3757   Create PLT entry.
3758 ENUM
3759   BFD_RELOC_390_RELATIVE
3760 ENUMDOC
3761   Adjust by program base.
3762 ENUM
3763   BFD_RELOC_390_GOTPC
3764 ENUMDOC
3765   32 bit PC relative offset to GOT.
3766 ENUM
3767   BFD_RELOC_390_GOT16
3768 ENUMDOC
3769   16 bit GOT offset.
3770 ENUM
3771   BFD_RELOC_390_PC16DBL
3772 ENUMDOC
3773   PC relative 16 bit shifted by 1.
3774 ENUM
3775   BFD_RELOC_390_PLT16DBL
3776 ENUMDOC
3777   16 bit PC rel. PLT shifted by 1.
3778 ENUM
3779   BFD_RELOC_390_PC32DBL
3780 ENUMDOC
3781   PC relative 32 bit shifted by 1.
3782 ENUM
3783   BFD_RELOC_390_PLT32DBL
3784 ENUMDOC
3785   32 bit PC rel. PLT shifted by 1.
3786 ENUM
3787   BFD_RELOC_390_GOTPCDBL
3788 ENUMDOC
3789   32 bit PC rel. GOT shifted by 1.
3790 ENUM
3791   BFD_RELOC_390_GOT64
3792 ENUMDOC
3793   64 bit GOT offset.
3794 ENUM
3795   BFD_RELOC_390_PLT64
3796 ENUMDOC
3797   64 bit PC relative PLT address.
3798 ENUM
3799   BFD_RELOC_390_GOTENT
3800 ENUMDOC
3801   32 bit rel. offset to GOT entry.
3802 ENUM
3803   BFD_RELOC_390_GOTOFF64
3804 ENUMDOC
3805   64 bit offset to GOT.
3806 ENUM
3807   BFD_RELOC_390_GOTPLT12
3808 ENUMDOC
3809   12-bit offset to symbol-entry within GOT, with PLT handling.
3810 ENUM
3811   BFD_RELOC_390_GOTPLT16
3812 ENUMDOC
3813   16-bit offset to symbol-entry within GOT, with PLT handling.
3814 ENUM
3815   BFD_RELOC_390_GOTPLT32
3816 ENUMDOC
3817   32-bit offset to symbol-entry within GOT, with PLT handling.
3818 ENUM
3819   BFD_RELOC_390_GOTPLT64
3820 ENUMDOC
3821   64-bit offset to symbol-entry within GOT, with PLT handling.
3822 ENUM
3823   BFD_RELOC_390_GOTPLTENT
3824 ENUMDOC
3825   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
3826 ENUM
3827   BFD_RELOC_390_PLTOFF16
3828 ENUMDOC
3829   16-bit rel. offset from the GOT to a PLT entry.
3830 ENUM
3831   BFD_RELOC_390_PLTOFF32
3832 ENUMDOC
3833   32-bit rel. offset from the GOT to a PLT entry.
3834 ENUM
3835   BFD_RELOC_390_PLTOFF64
3836 ENUMDOC
3837   64-bit rel. offset from the GOT to a PLT entry.
3838
3839 ENUM
3840   BFD_RELOC_390_TLS_LOAD
3841 ENUMX
3842   BFD_RELOC_390_TLS_GDCALL
3843 ENUMX
3844   BFD_RELOC_390_TLS_LDCALL
3845 ENUMX
3846   BFD_RELOC_390_TLS_GD32
3847 ENUMX
3848   BFD_RELOC_390_TLS_GD64
3849 ENUMX
3850   BFD_RELOC_390_TLS_GOTIE12
3851 ENUMX
3852   BFD_RELOC_390_TLS_GOTIE32
3853 ENUMX
3854   BFD_RELOC_390_TLS_GOTIE64
3855 ENUMX
3856   BFD_RELOC_390_TLS_LDM32
3857 ENUMX
3858   BFD_RELOC_390_TLS_LDM64
3859 ENUMX
3860   BFD_RELOC_390_TLS_IE32
3861 ENUMX
3862   BFD_RELOC_390_TLS_IE64
3863 ENUMX
3864   BFD_RELOC_390_TLS_IEENT
3865 ENUMX
3866   BFD_RELOC_390_TLS_LE32
3867 ENUMX
3868   BFD_RELOC_390_TLS_LE64
3869 ENUMX
3870   BFD_RELOC_390_TLS_LDO32
3871 ENUMX
3872   BFD_RELOC_390_TLS_LDO64
3873 ENUMX
3874   BFD_RELOC_390_TLS_DTPMOD
3875 ENUMX
3876   BFD_RELOC_390_TLS_DTPOFF
3877 ENUMX
3878   BFD_RELOC_390_TLS_TPOFF
3879 ENUMDOC
3880   s390 tls relocations.
3881
3882 ENUM
3883   BFD_RELOC_390_20
3884 ENUMX
3885   BFD_RELOC_390_GOT20
3886 ENUMX
3887   BFD_RELOC_390_GOTPLT20
3888 ENUMX
3889   BFD_RELOC_390_TLS_GOTIE20
3890 ENUMDOC
3891   Long displacement extension.
3892
3893 ENUM
3894   BFD_RELOC_IP2K_FR9
3895 ENUMDOC
3896   Scenix IP2K - 9-bit register number / data address
3897 ENUM
3898   BFD_RELOC_IP2K_BANK
3899 ENUMDOC
3900   Scenix IP2K - 4-bit register/data bank number
3901 ENUM
3902   BFD_RELOC_IP2K_ADDR16CJP
3903 ENUMDOC
3904   Scenix IP2K - low 13 bits of instruction word address
3905 ENUM
3906   BFD_RELOC_IP2K_PAGE3
3907 ENUMDOC
3908   Scenix IP2K - high 3 bits of instruction word address
3909 ENUM
3910   BFD_RELOC_IP2K_LO8DATA
3911 ENUMX
3912   BFD_RELOC_IP2K_HI8DATA
3913 ENUMX
3914   BFD_RELOC_IP2K_EX8DATA
3915 ENUMDOC
3916   Scenix IP2K - ext/low/high 8 bits of data address
3917 ENUM
3918   BFD_RELOC_IP2K_LO8INSN
3919 ENUMX
3920   BFD_RELOC_IP2K_HI8INSN
3921 ENUMDOC
3922   Scenix IP2K - low/high 8 bits of instruction word address
3923 ENUM
3924   BFD_RELOC_IP2K_PC_SKIP
3925 ENUMDOC
3926   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
3927 ENUM
3928   BFD_RELOC_IP2K_TEXT
3929 ENUMDOC
3930   Scenix IP2K - 16 bit word address in text section.
3931 ENUM
3932   BFD_RELOC_IP2K_FR_OFFSET
3933 ENUMDOC
3934   Scenix IP2K - 7-bit sp or dp offset
3935 ENUM
3936   BFD_RELOC_VPE4KMATH_DATA
3937 ENUMX
3938   BFD_RELOC_VPE4KMATH_INSN
3939 ENUMDOC
3940   Scenix VPE4K coprocessor - data/insn-space addressing
3941
3942 ENUM
3943   BFD_RELOC_VTABLE_INHERIT
3944 ENUMX
3945   BFD_RELOC_VTABLE_ENTRY
3946 ENUMDOC
3947   These two relocations are used by the linker to determine which of
3948   the entries in a C++ virtual function table are actually used.  When
3949   the --gc-sections option is given, the linker will zero out the entries
3950   that are not used, so that the code for those functions need not be
3951   included in the output.
3952
3953   VTABLE_INHERIT is a zero-space relocation used to describe to the
3954   linker the inheritance tree of a C++ virtual function table.  The
3955   relocation's symbol should be the parent class' vtable, and the
3956   relocation should be located at the child vtable.
3957
3958   VTABLE_ENTRY is a zero-space relocation that describes the use of a
3959   virtual function table entry.  The reloc's symbol should refer to the
3960   table of the class mentioned in the code.  Off of that base, an offset
3961   describes the entry that is being used.  For Rela hosts, this offset
3962   is stored in the reloc's addend.  For Rel hosts, we are forced to put
3963   this offset in the reloc's section offset.
3964
3965 ENUM
3966   BFD_RELOC_IA64_IMM14
3967 ENUMX
3968   BFD_RELOC_IA64_IMM22
3969 ENUMX
3970   BFD_RELOC_IA64_IMM64
3971 ENUMX
3972   BFD_RELOC_IA64_DIR32MSB
3973 ENUMX
3974   BFD_RELOC_IA64_DIR32LSB
3975 ENUMX
3976   BFD_RELOC_IA64_DIR64MSB
3977 ENUMX
3978   BFD_RELOC_IA64_DIR64LSB
3979 ENUMX
3980   BFD_RELOC_IA64_GPREL22
3981 ENUMX
3982   BFD_RELOC_IA64_GPREL64I
3983 ENUMX
3984   BFD_RELOC_IA64_GPREL32MSB
3985 ENUMX
3986   BFD_RELOC_IA64_GPREL32LSB
3987 ENUMX
3988   BFD_RELOC_IA64_GPREL64MSB
3989 ENUMX
3990   BFD_RELOC_IA64_GPREL64LSB
3991 ENUMX
3992   BFD_RELOC_IA64_LTOFF22
3993 ENUMX
3994   BFD_RELOC_IA64_LTOFF64I
3995 ENUMX
3996   BFD_RELOC_IA64_PLTOFF22
3997 ENUMX
3998   BFD_RELOC_IA64_PLTOFF64I
3999 ENUMX
4000   BFD_RELOC_IA64_PLTOFF64MSB
4001 ENUMX
4002   BFD_RELOC_IA64_PLTOFF64LSB
4003 ENUMX
4004   BFD_RELOC_IA64_FPTR64I
4005 ENUMX
4006   BFD_RELOC_IA64_FPTR32MSB
4007 ENUMX
4008   BFD_RELOC_IA64_FPTR32LSB
4009 ENUMX
4010   BFD_RELOC_IA64_FPTR64MSB
4011 ENUMX
4012   BFD_RELOC_IA64_FPTR64LSB
4013 ENUMX
4014   BFD_RELOC_IA64_PCREL21B
4015 ENUMX
4016   BFD_RELOC_IA64_PCREL21BI
4017 ENUMX
4018   BFD_RELOC_IA64_PCREL21M
4019 ENUMX
4020   BFD_RELOC_IA64_PCREL21F
4021 ENUMX
4022   BFD_RELOC_IA64_PCREL22
4023 ENUMX
4024   BFD_RELOC_IA64_PCREL60B
4025 ENUMX
4026   BFD_RELOC_IA64_PCREL64I
4027 ENUMX
4028   BFD_RELOC_IA64_PCREL32MSB
4029 ENUMX
4030   BFD_RELOC_IA64_PCREL32LSB
4031 ENUMX
4032   BFD_RELOC_IA64_PCREL64MSB
4033 ENUMX
4034   BFD_RELOC_IA64_PCREL64LSB
4035 ENUMX
4036   BFD_RELOC_IA64_LTOFF_FPTR22
4037 ENUMX
4038   BFD_RELOC_IA64_LTOFF_FPTR64I
4039 ENUMX
4040   BFD_RELOC_IA64_LTOFF_FPTR32MSB
4041 ENUMX
4042   BFD_RELOC_IA64_LTOFF_FPTR32LSB
4043 ENUMX
4044   BFD_RELOC_IA64_LTOFF_FPTR64MSB
4045 ENUMX
4046   BFD_RELOC_IA64_LTOFF_FPTR64LSB
4047 ENUMX
4048   BFD_RELOC_IA64_SEGREL32MSB
4049 ENUMX
4050   BFD_RELOC_IA64_SEGREL32LSB
4051 ENUMX
4052   BFD_RELOC_IA64_SEGREL64MSB
4053 ENUMX
4054   BFD_RELOC_IA64_SEGREL64LSB
4055 ENUMX
4056   BFD_RELOC_IA64_SECREL32MSB
4057 ENUMX
4058   BFD_RELOC_IA64_SECREL32LSB
4059 ENUMX
4060   BFD_RELOC_IA64_SECREL64MSB
4061 ENUMX
4062   BFD_RELOC_IA64_SECREL64LSB
4063 ENUMX
4064   BFD_RELOC_IA64_REL32MSB
4065 ENUMX
4066   BFD_RELOC_IA64_REL32LSB
4067 ENUMX
4068   BFD_RELOC_IA64_REL64MSB
4069 ENUMX
4070   BFD_RELOC_IA64_REL64LSB
4071 ENUMX
4072   BFD_RELOC_IA64_LTV32MSB
4073 ENUMX
4074   BFD_RELOC_IA64_LTV32LSB
4075 ENUMX
4076   BFD_RELOC_IA64_LTV64MSB
4077 ENUMX
4078   BFD_RELOC_IA64_LTV64LSB
4079 ENUMX
4080   BFD_RELOC_IA64_IPLTMSB
4081 ENUMX
4082   BFD_RELOC_IA64_IPLTLSB
4083 ENUMX
4084   BFD_RELOC_IA64_COPY
4085 ENUMX
4086   BFD_RELOC_IA64_LTOFF22X
4087 ENUMX
4088   BFD_RELOC_IA64_LDXMOV
4089 ENUMX
4090   BFD_RELOC_IA64_TPREL14
4091 ENUMX
4092   BFD_RELOC_IA64_TPREL22
4093 ENUMX
4094   BFD_RELOC_IA64_TPREL64I
4095 ENUMX
4096   BFD_RELOC_IA64_TPREL64MSB
4097 ENUMX
4098   BFD_RELOC_IA64_TPREL64LSB
4099 ENUMX
4100   BFD_RELOC_IA64_LTOFF_TPREL22
4101 ENUMX
4102   BFD_RELOC_IA64_DTPMOD64MSB
4103 ENUMX
4104   BFD_RELOC_IA64_DTPMOD64LSB
4105 ENUMX
4106   BFD_RELOC_IA64_LTOFF_DTPMOD22
4107 ENUMX
4108   BFD_RELOC_IA64_DTPREL14
4109 ENUMX
4110   BFD_RELOC_IA64_DTPREL22
4111 ENUMX
4112   BFD_RELOC_IA64_DTPREL64I
4113 ENUMX
4114   BFD_RELOC_IA64_DTPREL32MSB
4115 ENUMX
4116   BFD_RELOC_IA64_DTPREL32LSB
4117 ENUMX
4118   BFD_RELOC_IA64_DTPREL64MSB
4119 ENUMX
4120   BFD_RELOC_IA64_DTPREL64LSB
4121 ENUMX
4122   BFD_RELOC_IA64_LTOFF_DTPREL22
4123 ENUMDOC
4124   Intel IA64 Relocations.
4125
4126 ENUM
4127   BFD_RELOC_M68HC11_HI8
4128 ENUMDOC
4129   Motorola 68HC11 reloc.
4130   This is the 8 bit high part of an absolute address.
4131 ENUM
4132   BFD_RELOC_M68HC11_LO8
4133 ENUMDOC
4134   Motorola 68HC11 reloc.
4135   This is the 8 bit low part of an absolute address.
4136 ENUM
4137   BFD_RELOC_M68HC11_3B
4138 ENUMDOC
4139   Motorola 68HC11 reloc.
4140   This is the 3 bit of a value.
4141 ENUM
4142   BFD_RELOC_M68HC11_RL_JUMP
4143 ENUMDOC
4144   Motorola 68HC11 reloc.
4145   This reloc marks the beginning of a jump/call instruction.
4146   It is used for linker relaxation to correctly identify beginning
4147   of instruction and change some branches to use PC-relative
4148   addressing mode.
4149 ENUM
4150   BFD_RELOC_M68HC11_RL_GROUP
4151 ENUMDOC
4152   Motorola 68HC11 reloc.
4153   This reloc marks a group of several instructions that gcc generates
4154   and for which the linker relaxation pass can modify and/or remove
4155   some of them.
4156 ENUM
4157   BFD_RELOC_M68HC11_LO16
4158 ENUMDOC
4159   Motorola 68HC11 reloc.
4160   This is the 16-bit lower part of an address.  It is used for 'call'
4161   instruction to specify the symbol address without any special
4162   transformation (due to memory bank window).
4163 ENUM
4164   BFD_RELOC_M68HC11_PAGE
4165 ENUMDOC
4166   Motorola 68HC11 reloc.
4167   This is a 8-bit reloc that specifies the page number of an address.
4168   It is used by 'call' instruction to specify the page number of
4169   the symbol.
4170 ENUM
4171   BFD_RELOC_M68HC11_24
4172 ENUMDOC
4173   Motorola 68HC11 reloc.
4174   This is a 24-bit reloc that represents the address with a 16-bit
4175   value and a 8-bit page number.  The symbol address is transformed
4176   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
4177 ENUM
4178   BFD_RELOC_M68HC12_5B
4179 ENUMDOC
4180   Motorola 68HC12 reloc.
4181   This is the 5 bits of a value.
4182
4183 ENUM
4184   BFD_RELOC_16C_NUM08
4185 ENUMX
4186   BFD_RELOC_16C_NUM08_C
4187 ENUMX
4188   BFD_RELOC_16C_NUM16
4189 ENUMX
4190   BFD_RELOC_16C_NUM16_C
4191 ENUMX
4192   BFD_RELOC_16C_NUM32
4193 ENUMX
4194   BFD_RELOC_16C_NUM32_C
4195 ENUMX
4196   BFD_RELOC_16C_DISP04
4197 ENUMX
4198   BFD_RELOC_16C_DISP04_C
4199 ENUMX
4200   BFD_RELOC_16C_DISP08
4201 ENUMX
4202   BFD_RELOC_16C_DISP08_C
4203 ENUMX
4204   BFD_RELOC_16C_DISP16
4205 ENUMX
4206   BFD_RELOC_16C_DISP16_C
4207 ENUMX
4208   BFD_RELOC_16C_DISP24
4209 ENUMX
4210   BFD_RELOC_16C_DISP24_C
4211 ENUMX
4212   BFD_RELOC_16C_DISP24a
4213 ENUMX
4214   BFD_RELOC_16C_DISP24a_C
4215 ENUMX
4216   BFD_RELOC_16C_REG04
4217 ENUMX
4218   BFD_RELOC_16C_REG04_C
4219 ENUMX
4220   BFD_RELOC_16C_REG04a
4221 ENUMX
4222   BFD_RELOC_16C_REG04a_C
4223 ENUMX
4224   BFD_RELOC_16C_REG14
4225 ENUMX
4226   BFD_RELOC_16C_REG14_C
4227 ENUMX
4228   BFD_RELOC_16C_REG16
4229 ENUMX
4230   BFD_RELOC_16C_REG16_C
4231 ENUMX
4232   BFD_RELOC_16C_REG20
4233 ENUMX
4234   BFD_RELOC_16C_REG20_C
4235 ENUMX
4236   BFD_RELOC_16C_ABS20
4237 ENUMX
4238   BFD_RELOC_16C_ABS20_C
4239 ENUMX
4240   BFD_RELOC_16C_ABS24
4241 ENUMX
4242   BFD_RELOC_16C_ABS24_C
4243 ENUMX
4244   BFD_RELOC_16C_IMM04
4245 ENUMX
4246   BFD_RELOC_16C_IMM04_C
4247 ENUMX
4248   BFD_RELOC_16C_IMM16
4249 ENUMX
4250   BFD_RELOC_16C_IMM16_C
4251 ENUMX
4252   BFD_RELOC_16C_IMM20
4253 ENUMX
4254   BFD_RELOC_16C_IMM20_C
4255 ENUMX
4256   BFD_RELOC_16C_IMM24
4257 ENUMX
4258   BFD_RELOC_16C_IMM24_C
4259 ENUMX
4260   BFD_RELOC_16C_IMM32
4261 ENUMX
4262   BFD_RELOC_16C_IMM32_C
4263 ENUMDOC
4264   NS CR16C Relocations.
4265
4266 ENUM
4267   BFD_RELOC_CRX_REL4
4268 ENUMX
4269   BFD_RELOC_CRX_REL8
4270 ENUMX
4271   BFD_RELOC_CRX_REL8_CMP
4272 ENUMX
4273   BFD_RELOC_CRX_REL16
4274 ENUMX
4275   BFD_RELOC_CRX_REL24
4276 ENUMX
4277   BFD_RELOC_CRX_REL32
4278 ENUMX
4279   BFD_RELOC_CRX_REGREL12
4280 ENUMX
4281   BFD_RELOC_CRX_REGREL22
4282 ENUMX
4283   BFD_RELOC_CRX_REGREL28
4284 ENUMX
4285   BFD_RELOC_CRX_REGREL32
4286 ENUMX
4287   BFD_RELOC_CRX_ABS16
4288 ENUMX
4289   BFD_RELOC_CRX_ABS32
4290 ENUMX
4291   BFD_RELOC_CRX_NUM8
4292 ENUMX
4293   BFD_RELOC_CRX_NUM16
4294 ENUMX
4295   BFD_RELOC_CRX_NUM32
4296 ENUMX
4297   BFD_RELOC_CRX_IMM16
4298 ENUMX
4299   BFD_RELOC_CRX_IMM32
4300 ENUMX
4301   BFD_RELOC_CRX_SWITCH8
4302 ENUMX
4303   BFD_RELOC_CRX_SWITCH16
4304 ENUMX
4305   BFD_RELOC_CRX_SWITCH32
4306 ENUMDOC
4307   NS CRX Relocations.
4308
4309 ENUM
4310   BFD_RELOC_CRIS_BDISP8
4311 ENUMX
4312   BFD_RELOC_CRIS_UNSIGNED_5
4313 ENUMX
4314   BFD_RELOC_CRIS_SIGNED_6
4315 ENUMX
4316   BFD_RELOC_CRIS_UNSIGNED_6
4317 ENUMX
4318   BFD_RELOC_CRIS_SIGNED_8
4319 ENUMX
4320   BFD_RELOC_CRIS_UNSIGNED_8
4321 ENUMX
4322   BFD_RELOC_CRIS_SIGNED_16
4323 ENUMX
4324   BFD_RELOC_CRIS_UNSIGNED_16
4325 ENUMX
4326   BFD_RELOC_CRIS_LAPCQ_OFFSET
4327 ENUMX
4328   BFD_RELOC_CRIS_UNSIGNED_4
4329 ENUMDOC
4330   These relocs are only used within the CRIS assembler.  They are not
4331   (at present) written to any object files.
4332 ENUM
4333   BFD_RELOC_CRIS_COPY
4334 ENUMX
4335   BFD_RELOC_CRIS_GLOB_DAT
4336 ENUMX
4337   BFD_RELOC_CRIS_JUMP_SLOT
4338 ENUMX
4339   BFD_RELOC_CRIS_RELATIVE
4340 ENUMDOC
4341   Relocs used in ELF shared libraries for CRIS.
4342 ENUM
4343   BFD_RELOC_CRIS_32_GOT
4344 ENUMDOC
4345   32-bit offset to symbol-entry within GOT.
4346 ENUM
4347   BFD_RELOC_CRIS_16_GOT
4348 ENUMDOC
4349   16-bit offset to symbol-entry within GOT.
4350 ENUM
4351   BFD_RELOC_CRIS_32_GOTPLT
4352 ENUMDOC
4353   32-bit offset to symbol-entry within GOT, with PLT handling.
4354 ENUM
4355   BFD_RELOC_CRIS_16_GOTPLT
4356 ENUMDOC
4357   16-bit offset to symbol-entry within GOT, with PLT handling.
4358 ENUM
4359   BFD_RELOC_CRIS_32_GOTREL
4360 ENUMDOC
4361   32-bit offset to symbol, relative to GOT.
4362 ENUM
4363   BFD_RELOC_CRIS_32_PLT_GOTREL
4364 ENUMDOC
4365   32-bit offset to symbol with PLT entry, relative to GOT.
4366 ENUM
4367   BFD_RELOC_CRIS_32_PLT_PCREL
4368 ENUMDOC
4369   32-bit offset to symbol with PLT entry, relative to this relocation.
4370
4371 ENUM
4372   BFD_RELOC_860_COPY
4373 ENUMX
4374   BFD_RELOC_860_GLOB_DAT
4375 ENUMX
4376   BFD_RELOC_860_JUMP_SLOT
4377 ENUMX
4378   BFD_RELOC_860_RELATIVE
4379 ENUMX
4380   BFD_RELOC_860_PC26
4381 ENUMX
4382   BFD_RELOC_860_PLT26
4383 ENUMX
4384   BFD_RELOC_860_PC16
4385 ENUMX
4386   BFD_RELOC_860_LOW0
4387 ENUMX
4388   BFD_RELOC_860_SPLIT0
4389 ENUMX
4390   BFD_RELOC_860_LOW1
4391 ENUMX
4392   BFD_RELOC_860_SPLIT1
4393 ENUMX
4394   BFD_RELOC_860_LOW2
4395 ENUMX
4396   BFD_RELOC_860_SPLIT2
4397 ENUMX
4398   BFD_RELOC_860_LOW3
4399 ENUMX
4400   BFD_RELOC_860_LOGOT0
4401 ENUMX
4402   BFD_RELOC_860_SPGOT0
4403 ENUMX
4404   BFD_RELOC_860_LOGOT1
4405 ENUMX
4406   BFD_RELOC_860_SPGOT1
4407 ENUMX
4408   BFD_RELOC_860_LOGOTOFF0
4409 ENUMX
4410   BFD_RELOC_860_SPGOTOFF0
4411 ENUMX
4412   BFD_RELOC_860_LOGOTOFF1
4413 ENUMX
4414   BFD_RELOC_860_SPGOTOFF1
4415 ENUMX
4416   BFD_RELOC_860_LOGOTOFF2
4417 ENUMX
4418   BFD_RELOC_860_LOGOTOFF3
4419 ENUMX
4420   BFD_RELOC_860_LOPC
4421 ENUMX
4422   BFD_RELOC_860_HIGHADJ
4423 ENUMX
4424   BFD_RELOC_860_HAGOT
4425 ENUMX
4426   BFD_RELOC_860_HAGOTOFF
4427 ENUMX
4428   BFD_RELOC_860_HAPC
4429 ENUMX
4430   BFD_RELOC_860_HIGH
4431 ENUMX
4432   BFD_RELOC_860_HIGOT
4433 ENUMX
4434   BFD_RELOC_860_HIGOTOFF
4435 ENUMDOC
4436   Intel i860 Relocations.
4437
4438 ENUM
4439   BFD_RELOC_OPENRISC_ABS_26
4440 ENUMX
4441   BFD_RELOC_OPENRISC_REL_26
4442 ENUMDOC
4443   OpenRISC Relocations.
4444
4445 ENUM
4446   BFD_RELOC_H8_DIR16A8
4447 ENUMX
4448   BFD_RELOC_H8_DIR16R8
4449 ENUMX
4450   BFD_RELOC_H8_DIR24A8
4451 ENUMX
4452   BFD_RELOC_H8_DIR24R8
4453 ENUMX
4454   BFD_RELOC_H8_DIR32A16
4455 ENUMDOC
4456   H8 elf Relocations.
4457
4458 ENUM
4459   BFD_RELOC_XSTORMY16_REL_12
4460 ENUMX
4461   BFD_RELOC_XSTORMY16_12
4462 ENUMX
4463   BFD_RELOC_XSTORMY16_24
4464 ENUMX
4465   BFD_RELOC_XSTORMY16_FPTR16
4466 ENUMDOC
4467   Sony Xstormy16 Relocations.
4468
4469 ENUM
4470   BFD_RELOC_XC16X_PAG
4471 ENUMX
4472   BFD_RELOC_XC16X_POF
4473 ENUMX
4474   BFD_RELOC_XC16X_SEG
4475 ENUMX
4476   BFD_RELOC_XC16X_SOF
4477 ENUMDOC
4478   Infineon Relocations.
4479
4480 ENUM
4481   BFD_RELOC_VAX_GLOB_DAT
4482 ENUMX
4483   BFD_RELOC_VAX_JMP_SLOT
4484 ENUMX
4485   BFD_RELOC_VAX_RELATIVE
4486 ENUMDOC
4487   Relocations used by VAX ELF.
4488
4489 ENUM
4490   BFD_RELOC_MT_PC16
4491 ENUMDOC
4492   Morpho MT - 16 bit immediate relocation.
4493 ENUM
4494   BFD_RELOC_MT_HI16
4495 ENUMDOC
4496   Morpho MT - Hi 16 bits of an address.
4497 ENUM
4498   BFD_RELOC_MT_LO16
4499 ENUMDOC
4500   Morpho MT - Low 16 bits of an address.
4501 ENUM
4502   BFD_RELOC_MT_GNU_VTINHERIT
4503 ENUMDOC
4504   Morpho MT - Used to tell the linker which vtable entries are used.
4505 ENUM
4506   BFD_RELOC_MT_GNU_VTENTRY
4507 ENUMDOC
4508   Morpho MT - Used to tell the linker which vtable entries are used.
4509 ENUM
4510   BFD_RELOC_MT_PCINSN8
4511 ENUMDOC
4512   Morpho MT - 8 bit immediate relocation.
4513
4514 ENUM
4515   BFD_RELOC_MSP430_10_PCREL
4516 ENUMX
4517   BFD_RELOC_MSP430_16_PCREL
4518 ENUMX
4519   BFD_RELOC_MSP430_16
4520 ENUMX
4521   BFD_RELOC_MSP430_16_PCREL_BYTE
4522 ENUMX
4523   BFD_RELOC_MSP430_16_BYTE
4524 ENUMX
4525   BFD_RELOC_MSP430_2X_PCREL
4526 ENUMX
4527   BFD_RELOC_MSP430_RL_PCREL
4528 ENUMDOC
4529   msp430 specific relocation codes
4530
4531 ENUM
4532   BFD_RELOC_IQ2000_OFFSET_16
4533 ENUMX
4534   BFD_RELOC_IQ2000_OFFSET_21
4535 ENUMX
4536   BFD_RELOC_IQ2000_UHI16
4537 ENUMDOC
4538   IQ2000 Relocations.
4539
4540 ENUM
4541   BFD_RELOC_XTENSA_RTLD
4542 ENUMDOC
4543   Special Xtensa relocation used only by PLT entries in ELF shared
4544   objects to indicate that the runtime linker should set the value
4545   to one of its own internal functions or data structures.
4546 ENUM
4547   BFD_RELOC_XTENSA_GLOB_DAT
4548 ENUMX
4549   BFD_RELOC_XTENSA_JMP_SLOT
4550 ENUMX
4551   BFD_RELOC_XTENSA_RELATIVE
4552 ENUMDOC
4553   Xtensa relocations for ELF shared objects.
4554 ENUM
4555   BFD_RELOC_XTENSA_PLT
4556 ENUMDOC
4557   Xtensa relocation used in ELF object files for symbols that may require
4558   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
4559 ENUM
4560   BFD_RELOC_XTENSA_DIFF8
4561 ENUMX
4562   BFD_RELOC_XTENSA_DIFF16
4563 ENUMX
4564   BFD_RELOC_XTENSA_DIFF32
4565 ENUMDOC
4566   Xtensa relocations to mark the difference of two local symbols.
4567   These are only needed to support linker relaxation and can be ignored
4568   when not relaxing.  The field is set to the value of the difference
4569   assuming no relaxation.  The relocation encodes the position of the
4570   first symbol so the linker can determine whether to adjust the field
4571   value.
4572 ENUM
4573   BFD_RELOC_XTENSA_SLOT0_OP
4574 ENUMX
4575   BFD_RELOC_XTENSA_SLOT1_OP
4576 ENUMX
4577   BFD_RELOC_XTENSA_SLOT2_OP
4578 ENUMX
4579   BFD_RELOC_XTENSA_SLOT3_OP
4580 ENUMX
4581   BFD_RELOC_XTENSA_SLOT4_OP
4582 ENUMX
4583   BFD_RELOC_XTENSA_SLOT5_OP
4584 ENUMX
4585   BFD_RELOC_XTENSA_SLOT6_OP
4586 ENUMX
4587   BFD_RELOC_XTENSA_SLOT7_OP
4588 ENUMX
4589   BFD_RELOC_XTENSA_SLOT8_OP
4590 ENUMX
4591   BFD_RELOC_XTENSA_SLOT9_OP
4592 ENUMX
4593   BFD_RELOC_XTENSA_SLOT10_OP
4594 ENUMX
4595   BFD_RELOC_XTENSA_SLOT11_OP
4596 ENUMX
4597   BFD_RELOC_XTENSA_SLOT12_OP
4598 ENUMX
4599   BFD_RELOC_XTENSA_SLOT13_OP
4600 ENUMX
4601   BFD_RELOC_XTENSA_SLOT14_OP
4602 ENUMDOC
4603   Generic Xtensa relocations for instruction operands.  Only the slot
4604   number is encoded in the relocation.  The relocation applies to the
4605   last PC-relative immediate operand, or if there are no PC-relative
4606   immediates, to the last immediate operand.
4607 ENUM
4608   BFD_RELOC_XTENSA_SLOT0_ALT
4609 ENUMX
4610   BFD_RELOC_XTENSA_SLOT1_ALT
4611 ENUMX
4612   BFD_RELOC_XTENSA_SLOT2_ALT
4613 ENUMX
4614   BFD_RELOC_XTENSA_SLOT3_ALT
4615 ENUMX
4616   BFD_RELOC_XTENSA_SLOT4_ALT
4617 ENUMX
4618   BFD_RELOC_XTENSA_SLOT5_ALT
4619 ENUMX
4620   BFD_RELOC_XTENSA_SLOT6_ALT
4621 ENUMX
4622   BFD_RELOC_XTENSA_SLOT7_ALT
4623 ENUMX
4624   BFD_RELOC_XTENSA_SLOT8_ALT
4625 ENUMX
4626   BFD_RELOC_XTENSA_SLOT9_ALT
4627 ENUMX
4628   BFD_RELOC_XTENSA_SLOT10_ALT
4629 ENUMX
4630   BFD_RELOC_XTENSA_SLOT11_ALT
4631 ENUMX
4632   BFD_RELOC_XTENSA_SLOT12_ALT
4633 ENUMX
4634   BFD_RELOC_XTENSA_SLOT13_ALT
4635 ENUMX
4636   BFD_RELOC_XTENSA_SLOT14_ALT
4637 ENUMDOC
4638   Alternate Xtensa relocations.  Only the slot is encoded in the
4639   relocation.  The meaning of these relocations is opcode-specific.
4640 ENUM
4641   BFD_RELOC_XTENSA_OP0
4642 ENUMX
4643   BFD_RELOC_XTENSA_OP1
4644 ENUMX
4645   BFD_RELOC_XTENSA_OP2
4646 ENUMDOC
4647   Xtensa relocations for backward compatibility.  These have all been
4648   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
4649 ENUM
4650   BFD_RELOC_XTENSA_ASM_EXPAND
4651 ENUMDOC
4652   Xtensa relocation to mark that the assembler expanded the
4653   instructions from an original target.  The expansion size is
4654   encoded in the reloc size.
4655 ENUM
4656   BFD_RELOC_XTENSA_ASM_SIMPLIFY
4657 ENUMDOC
4658   Xtensa relocation to mark that the linker should simplify
4659   assembler-expanded instructions.  This is commonly used
4660   internally by the linker after analysis of a
4661   BFD_RELOC_XTENSA_ASM_EXPAND.
4662
4663 ENUM
4664   BFD_RELOC_Z80_DISP8
4665 ENUMDOC
4666   8 bit signed offset in (ix+d) or (iy+d).
4667
4668 ENUM
4669   BFD_RELOC_Z8K_DISP7
4670 ENUMDOC
4671   DJNZ offset.
4672 ENUM
4673   BFD_RELOC_Z8K_CALLR
4674 ENUMDOC
4675   CALR offset.
4676 ENUM
4677   BFD_RELOC_Z8K_IMM4L
4678 ENUMDOC
4679   4 bit value.
4680
4681 ENDSENUM
4682   BFD_RELOC_UNUSED
4683 CODE_FRAGMENT
4684 .
4685 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
4686 */
4687
4688 /*
4689 FUNCTION
4690         bfd_reloc_type_lookup
4691
4692 SYNOPSIS
4693         reloc_howto_type *bfd_reloc_type_lookup
4694           (bfd *abfd, bfd_reloc_code_real_type code);
4695
4696 DESCRIPTION
4697         Return a pointer to a howto structure which, when
4698         invoked, will perform the relocation @var{code} on data from the
4699         architecture noted.
4700
4701 */
4702
4703 reloc_howto_type *
4704 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
4705 {
4706   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
4707 }
4708
4709 static reloc_howto_type bfd_howto_32 =
4710 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
4711
4712 /*
4713 INTERNAL_FUNCTION
4714         bfd_default_reloc_type_lookup
4715
4716 SYNOPSIS
4717         reloc_howto_type *bfd_default_reloc_type_lookup
4718           (bfd *abfd, bfd_reloc_code_real_type  code);
4719
4720 DESCRIPTION
4721         Provides a default relocation lookup routine for any architecture.
4722
4723 */
4724
4725 reloc_howto_type *
4726 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
4727 {
4728   switch (code)
4729     {
4730     case BFD_RELOC_CTOR:
4731       /* The type of reloc used in a ctor, which will be as wide as the
4732          address - so either a 64, 32, or 16 bitter.  */
4733       switch (bfd_get_arch_info (abfd)->bits_per_address)
4734         {
4735         case 64:
4736           BFD_FAIL ();
4737         case 32:
4738           return &bfd_howto_32;
4739         case 16:
4740           BFD_FAIL ();
4741         default:
4742           BFD_FAIL ();
4743         }
4744     default:
4745       BFD_FAIL ();
4746     }
4747   return NULL;
4748 }
4749
4750 /*
4751 FUNCTION
4752         bfd_get_reloc_code_name
4753
4754 SYNOPSIS
4755         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
4756
4757 DESCRIPTION
4758         Provides a printable name for the supplied relocation code.
4759         Useful mainly for printing error messages.
4760 */
4761
4762 const char *
4763 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
4764 {
4765   if (code > BFD_RELOC_UNUSED)
4766     return 0;
4767   return bfd_reloc_code_real_names[code];
4768 }
4769
4770 /*
4771 INTERNAL_FUNCTION
4772         bfd_generic_relax_section
4773
4774 SYNOPSIS
4775         bfd_boolean bfd_generic_relax_section
4776           (bfd *abfd,
4777            asection *section,
4778            struct bfd_link_info *,
4779            bfd_boolean *);
4780
4781 DESCRIPTION
4782         Provides default handling for relaxing for back ends which
4783         don't do relaxing.
4784 */
4785
4786 bfd_boolean
4787 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
4788                            asection *section ATTRIBUTE_UNUSED,
4789                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
4790                            bfd_boolean *again)
4791 {
4792   *again = FALSE;
4793   return TRUE;
4794 }
4795
4796 /*
4797 INTERNAL_FUNCTION
4798         bfd_generic_gc_sections
4799
4800 SYNOPSIS
4801         bfd_boolean bfd_generic_gc_sections
4802           (bfd *, struct bfd_link_info *);
4803
4804 DESCRIPTION
4805         Provides default handling for relaxing for back ends which
4806         don't do section gc -- i.e., does nothing.
4807 */
4808
4809 bfd_boolean
4810 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
4811                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
4812 {
4813   return TRUE;
4814 }
4815
4816 /*
4817 INTERNAL_FUNCTION
4818         bfd_generic_merge_sections
4819
4820 SYNOPSIS
4821         bfd_boolean bfd_generic_merge_sections
4822           (bfd *, struct bfd_link_info *);
4823
4824 DESCRIPTION
4825         Provides default handling for SEC_MERGE section merging for back ends
4826         which don't have SEC_MERGE support -- i.e., does nothing.
4827 */
4828
4829 bfd_boolean
4830 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
4831                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
4832 {
4833   return TRUE;
4834 }
4835
4836 /*
4837 INTERNAL_FUNCTION
4838         bfd_generic_get_relocated_section_contents
4839
4840 SYNOPSIS
4841         bfd_byte *bfd_generic_get_relocated_section_contents
4842           (bfd *abfd,
4843            struct bfd_link_info *link_info,
4844            struct bfd_link_order *link_order,
4845            bfd_byte *data,
4846            bfd_boolean relocatable,
4847            asymbol **symbols);
4848
4849 DESCRIPTION
4850         Provides default handling of relocation effort for back ends
4851         which can't be bothered to do it efficiently.
4852
4853 */
4854
4855 bfd_byte *
4856 bfd_generic_get_relocated_section_contents (bfd *abfd,
4857                                             struct bfd_link_info *link_info,
4858                                             struct bfd_link_order *link_order,
4859                                             bfd_byte *data,
4860                                             bfd_boolean relocatable,
4861                                             asymbol **symbols)
4862 {
4863   /* Get enough memory to hold the stuff.  */
4864   bfd *input_bfd = link_order->u.indirect.section->owner;
4865   asection *input_section = link_order->u.indirect.section;
4866
4867   long reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
4868   arelent **reloc_vector = NULL;
4869   long reloc_count;
4870   bfd_size_type sz;
4871
4872   if (reloc_size < 0)
4873     goto error_return;
4874
4875   reloc_vector = bfd_malloc (reloc_size);
4876   if (reloc_vector == NULL && reloc_size != 0)
4877     goto error_return;
4878
4879   /* Read in the section.  */
4880   sz = input_section->rawsize ? input_section->rawsize : input_section->size;
4881   if (!bfd_get_section_contents (input_bfd, input_section, data, 0, sz))
4882     goto error_return;
4883
4884   reloc_count = bfd_canonicalize_reloc (input_bfd,
4885                                         input_section,
4886                                         reloc_vector,
4887                                         symbols);
4888   if (reloc_count < 0)
4889     goto error_return;
4890
4891   if (reloc_count > 0)
4892     {
4893       arelent **parent;
4894       for (parent = reloc_vector; *parent != NULL; parent++)
4895         {
4896           char *error_message = NULL;
4897           bfd_reloc_status_type r =
4898             bfd_perform_relocation (input_bfd,
4899                                     *parent,
4900                                     data,
4901                                     input_section,
4902                                     relocatable ? abfd : NULL,
4903                                     &error_message);
4904
4905           if (relocatable)
4906             {
4907               asection *os = input_section->output_section;
4908
4909               /* A partial link, so keep the relocs.  */
4910               os->orelocation[os->reloc_count] = *parent;
4911               os->reloc_count++;
4912             }
4913
4914           if (r != bfd_reloc_ok)
4915             {
4916               switch (r)
4917                 {
4918                 case bfd_reloc_undefined:
4919                   if (!((*link_info->callbacks->undefined_symbol)
4920                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
4921                          input_bfd, input_section, (*parent)->address,
4922                          TRUE)))
4923                     goto error_return;
4924                   break;
4925                 case bfd_reloc_dangerous:
4926                   BFD_ASSERT (error_message != NULL);
4927                   if (!((*link_info->callbacks->reloc_dangerous)
4928                         (link_info, error_message, input_bfd, input_section,
4929                          (*parent)->address)))
4930                     goto error_return;
4931                   break;
4932                 case bfd_reloc_overflow:
4933                   if (!((*link_info->callbacks->reloc_overflow)
4934                         (link_info, NULL,
4935                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
4936                          (*parent)->howto->name, (*parent)->addend,
4937                          input_bfd, input_section, (*parent)->address)))
4938                     goto error_return;
4939                   break;
4940                 case bfd_reloc_outofrange:
4941                 default:
4942                   abort ();
4943                   break;
4944                 }
4945
4946             }
4947         }
4948     }
4949   if (reloc_vector != NULL)
4950     free (reloc_vector);
4951   return data;
4952
4953 error_return:
4954   if (reloc_vector != NULL)
4955     free (reloc_vector);
4956   return NULL;
4957 }