bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001, 2002, 2003, 2004, 2005, 2006
   4    Free Software Foundation, Inc.
   5    Written by Cygnus Support.
   6
   7    This file is part of BFD, the Binary File Descriptor library.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 2 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program; if not, write to the Free Software
  21    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
  22
  23 /*
  24 SECTION
  25         Relocations
  26
  27         BFD maintains relocations in much the same way it maintains
  28         symbols: they are left alone until required, then read in
  29         en-masse and translated into an internal form.  A common
  30         routine <<bfd_perform_relocation>> acts upon the
  31         canonical form to do the fixup.
  32
  33         Relocations are maintained on a per section basis,
  34         while symbols are maintained on a per BFD basis.
  35
  36         All that a back end has to do to fit the BFD interface is to create
  37         a <<struct reloc_cache_entry>> for each relocation
  38         in a particular section, and fill in the right bits of the structures.
  39
  40 @menu
  41 @* typedef arelent::
  42 @* howto manager::
  43 @end menu
  44
  45 */
  46
  47 /* DO compile in the reloc_code name table from libbfd.h.  */
  48 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  49
  50 #include "bfd.h"
  51 #include "sysdep.h"
  52 #include "bfdlink.h"
  53 #include "libbfd.h"
  54 /*
  55 DOCDD
  56 INODE
  57         typedef arelent, howto manager, Relocations, Relocations
  58
  59 SUBSECTION
  60         typedef arelent
  61
  62         This is the structure of a relocation entry:
  63
  64 CODE_FRAGMENT
  65 .
  66 .typedef enum bfd_reloc_status
  67 .{
  68 .  {* No errors detected.  *}
  69 .  bfd_reloc_ok,
  70 .
  71 .  {* The relocation was performed, but there was an overflow.  *}
  72 .  bfd_reloc_overflow,
  73 .
  74 .  {* The address to relocate was not within the section supplied.  *}
  75 .  bfd_reloc_outofrange,
  76 .
  77 .  {* Used by special functions.  *}
  78 .  bfd_reloc_continue,
  79 .
  80 .  {* Unsupported relocation size requested.  *}
  81 .  bfd_reloc_notsupported,
  82 .
  83 .  {* Unused.  *}
  84 .  bfd_reloc_other,
  85 .
  86 .  {* The symbol to relocate against was undefined.  *}
  87 .  bfd_reloc_undefined,
  88 .
  89 .  {* The relocation was performed, but may not be ok - presently
  90 .     generated only when linking i960 coff files with i960 b.out
  91 .     symbols.  If this type is returned, the error_message argument
  92 .     to bfd_perform_relocation will be set.  *}
  93 .  bfd_reloc_dangerous
  94 . }
  95 . bfd_reloc_status_type;
  96 .
  97 .
  98 .typedef struct reloc_cache_entry
  99 .{
 100 .  {* A pointer into the canonical table of pointers.  *}
 101 .  struct bfd_symbol **sym_ptr_ptr;
 102 .
 103 .  {* offset in section.  *}
 104 .  bfd_size_type address;
 105 .
 106 .  {* addend for relocation value.  *}
 107 .  bfd_vma addend;
 108 .
 109 .  {* Pointer to how to perform the required relocation.  *}
 110 .  reloc_howto_type *howto;
 111 .
 112 .}
 113 .arelent;
 114 .
 115 */
 116
 117 /*
 118 DESCRIPTION
 119
 120         Here is a description of each of the fields within an <<arelent>>:
 121
 122         o <<sym_ptr_ptr>>
 123
 124         The symbol table pointer points to a pointer to the symbol
 125         associated with the relocation request.  It is the pointer
 126         into the table returned by the back end's
 127         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 128         referenced through a pointer to a pointer so that tools like
 129         the linker can fix up all the symbols of the same name by
 130         modifying only one pointer. The relocation routine looks in
 131         the symbol and uses the base of the section the symbol is
 132         attached to and the value of the symbol as the initial
 133         relocation offset. If the symbol pointer is zero, then the
 134         section provided is looked up.
 135
 136         o <<address>>
 137
 138         The <<address>> field gives the offset in bytes from the base of
 139         the section data which owns the relocation record to the first
 140         byte of relocatable information. The actual data relocated
 141         will be relative to this point; for example, a relocation
 142         type which modifies the bottom two bytes of a four byte word
 143         would not touch the first byte pointed to in a big endian
 144         world.
 145
 146         o <<addend>>
 147
 148         The <<addend>> is a value provided by the back end to be added (!)
 149         to the relocation offset. Its interpretation is dependent upon
 150         the howto. For example, on the 68k the code:
 151
 152 |        char foo[];
 153 |        main()
 154 |                {
 155 |                return foo[0x12345678];
 156 |                }
 157
 158         Could be compiled into:
 159
 160 |        linkw fp,#-4
 161 |        moveb @@#12345678,d0
 162 |        extbl d0
 163 |        unlk fp
 164 |        rts
 165
 166         This could create a reloc pointing to <<foo>>, but leave the
 167         offset in the data, something like:
 168
 169 |RELOCATION RECORDS FOR [.text]:
 170 |offset   type      value
 171 |00000006 32        _foo
 172 |
 173 |00000000 4e56 fffc          ; linkw fp,#-4
 174 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 175 |0000000a 49c0               ; extbl d0
 176 |0000000c 4e5e               ; unlk fp
 177 |0000000e 4e75               ; rts
 178
 179         Using coff and an 88k, some instructions don't have enough
 180         space in them to represent the full address range, and
 181         pointers have to be loaded in two parts. So you'd get something like:
 182
 183 |        or.u     r13,r0,hi16(_foo+0x12345678)
 184 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 185 |        jmp      r1
 186
 187         This should create two relocs, both pointing to <<_foo>>, and with
 188         0x12340000 in their addend field. The data would consist of:
 189
 190 |RELOCATION RECORDS FOR [.text]:
 191 |offset   type      value
 192 |00000002 HVRT16    _foo+0x12340000
 193 |00000006 LVRT16    _foo+0x12340000
 194 |
 195 |00000000 5da05678           ; or.u r13,r0,0x5678
 196 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 197 |00000008 f400c001           ; jmp r1
 198
 199         The relocation routine digs out the value from the data, adds
 200         it to the addend to get the original offset, and then adds the
 201         value of <<_foo>>. Note that all 32 bits have to be kept around
 202         somewhere, to cope with carry from bit 15 to bit 16.
 203
 204         One further example is the sparc and the a.out format. The
 205         sparc has a similar problem to the 88k, in that some
 206         instructions don't have room for an entire offset, but on the
 207         sparc the parts are created in odd sized lumps. The designers of
 208         the a.out format chose to not use the data within the section
 209         for storing part of the offset; all the offset is kept within
 210         the reloc. Anything in the data should be ignored.
 211
 212 |        save %sp,-112,%sp
 213 |        sethi %hi(_foo+0x12345678),%g2
 214 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 215 |        ret
 216 |        restore
 217
 218         Both relocs contain a pointer to <<foo>>, and the offsets
 219         contain junk.
 220
 221 |RELOCATION RECORDS FOR [.text]:
 222 |offset   type      value
 223 |00000004 HI22      _foo+0x12345678
 224 |00000008 LO10      _foo+0x12345678
 225 |
 226 |00000000 9de3bf90     ; save %sp,-112,%sp
 227 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 228 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 229 |0000000c 81c7e008     ; ret
 230 |00000010 81e80000     ; restore
 231
 232         o <<howto>>
 233
 234         The <<howto>> field can be imagined as a
 235         relocation instruction. It is a pointer to a structure which
 236         contains information on what to do with all of the other
 237         information in the reloc record and data section. A back end
 238         would normally have a relocation instruction set and turn
 239         relocations into pointers to the correct structure on input -
 240         but it would be possible to create each howto field on demand.
 241
 242 */
 243
 244 /*
 245 SUBSUBSECTION
 246         <<enum complain_overflow>>
 247
 248         Indicates what sort of overflow checking should be done when
 249         performing a relocation.
 250
 251 CODE_FRAGMENT
 252 .
 253 .enum complain_overflow
 254 .{
 255 .  {* Do not complain on overflow.  *}
 256 .  complain_overflow_dont,
 257 .
 258 .  {* Complain if the value overflows when considered as a signed
 259 .     number one bit larger than the field.  ie. A bitfield of N bits
 260 .     is allowed to represent -2**n to 2**n-1.  *}
 261 .  complain_overflow_bitfield,
 262 .
 263 .  {* Complain if the value overflows when considered as a signed
 264 .     number.  *}
 265 .  complain_overflow_signed,
 266 .
 267 .  {* Complain if the value overflows when considered as an
 268 .     unsigned number.  *}
 269 .  complain_overflow_unsigned
 270 .};
 271
 272 */
 273
 274 /*
 275 SUBSUBSECTION
 276         <<reloc_howto_type>>
 277
 278         The <<reloc_howto_type>> is a structure which contains all the
 279         information that libbfd needs to know to tie up a back end's data.
 280
 281 CODE_FRAGMENT
 282 .struct bfd_symbol;             {* Forward declaration.  *}
 283 .
 284 .struct reloc_howto_struct
 285 .{
 286 .  {*  The type field has mainly a documentary use - the back end can
 287 .      do what it wants with it, though normally the back end's
 288 .      external idea of what a reloc number is stored
 289 .      in this field.  For example, a PC relative word relocation
 290 .      in a coff environment has the type 023 - because that's
 291 .      what the outside world calls a R_PCRWORD reloc.  *}
 292 .  unsigned int type;
 293 .
 294 .  {*  The value the final relocation is shifted right by.  This drops
 295 .      unwanted data from the relocation.  *}
 296 .  unsigned int rightshift;
 297 .
 298 .  {*  The size of the item to be relocated.  This is *not* a
 299 .      power-of-two measure.  To get the number of bytes operated
 300 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 301 .  int size;
 302 .
 303 .  {*  The number of bits in the item to be relocated.  This is used
 304 .      when doing overflow checking.  *}
 305 .  unsigned int bitsize;
 306 .
 307 .  {*  Notes that the relocation is relative to the location in the
 308 .      data section of the addend.  The relocation function will
 309 .      subtract from the relocation value the address of the location
 310 .      being relocated.  *}
 311 .  bfd_boolean pc_relative;
 312 .
 313 .  {*  The bit position of the reloc value in the destination.
 314 .      The relocated value is left shifted by this amount.  *}
 315 .  unsigned int bitpos;
 316 .
 317 .  {* What type of overflow error should be checked for when
 318 .     relocating.  *}
 319 .  enum complain_overflow complain_on_overflow;
 320 .
 321 .  {* If this field is non null, then the supplied function is
 322 .     called rather than the normal function.  This allows really
 323 .     strange relocation methods to be accommodated (e.g., i960 callj
 324 .     instructions).  *}
 325 .  bfd_reloc_status_type (*special_function)
 326 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 327 .     bfd *, char **);
 328 .
 329 .  {* The textual name of the relocation type.  *}
 330 .  char *name;
 331 .
 332 .  {* Some formats record a relocation addend in the section contents
 333 .     rather than with the relocation.  For ELF formats this is the
 334 .     distinction between USE_REL and USE_RELA (though the code checks
 335 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 336 .     addend is recorded with the section contents; when performing a
 337 .     partial link (ld -r) the section contents (the data) will be
 338 .     modified.  The value of this field is FALSE if addends are
 339 .     recorded with the relocation (in arelent.addend); when performing
 340 .     a partial link the relocation will be modified.
 341 .     All relocations for all ELF USE_RELA targets should set this field
 342 .     to FALSE (values of TRUE should be looked on with suspicion).
 343 .     However, the converse is not true: not all relocations of all ELF
 344 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 345 .     to each particular target.  For relocs that aren't used in partial
 346 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 347 .  bfd_boolean partial_inplace;
 348 .
 349 .  {* src_mask selects the part of the instruction (or data) to be used
 350 .     in the relocation sum.  If the target relocations don't have an
 351 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 352 .     dst_mask to extract the addend from the section contents.  If
 353 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 354 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 355 .     bogus as in those cases the value in the dst_mask part of the
 356 .     section contents should be treated as garbage.  *}
 357 .  bfd_vma src_mask;
 358 .
 359 .  {* dst_mask selects which parts of the instruction (or data) are
 360 .     replaced with a relocated value.  *}
 361 .  bfd_vma dst_mask;
 362 .
 363 .  {* When some formats create PC relative instructions, they leave
 364 .     the value of the pc of the place being relocated in the offset
 365 .     slot of the instruction, so that a PC relative relocation can
 366 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 367 .     Some formats leave the displacement part of an instruction
 368 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 369 .  bfd_boolean pcrel_offset;
 370 .};
 371 .
 372 */
 373
 374 /*
 375 FUNCTION
 376         The HOWTO Macro
 377
 378 DESCRIPTION
 379         The HOWTO define is horrible and will go away.
 380
 381 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 382 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 383
 384 DESCRIPTION
 385         And will be replaced with the totally magic way. But for the
 386         moment, we are compatible, so do it this way.
 387
 388 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 389 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 390 .         NAME, FALSE, 0, 0, IN)
 391 .
 392
 393 DESCRIPTION
 394         This is used to fill in an empty howto entry in an array.
 395
 396 .#define EMPTY_HOWTO(C) \
 397 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 398 .         NULL, FALSE, 0, 0, FALSE)
 399 .
 400
 401 DESCRIPTION
 402         Helper routine to turn a symbol into a relocation value.
 403
 404 .#define HOWTO_PREPARE(relocation, symbol)               \
 405 .  {                                                     \
 406 .    if (symbol != NULL)                                 \
 407 .      {                                                 \
 408 .        if (bfd_is_com_section (symbol->section))       \
 409 .          {                                             \
 410 .            relocation = 0;                             \
 411 .          }                                             \
 412 .        else                                            \
 413 .          {                                             \
 414 .            relocation = symbol->value;                 \
 415 .          }                                             \
 416 .      }                                                 \
 417 .  }
 418 .
 419 */
 420
 421 /*
 422 FUNCTION
 423         bfd_get_reloc_size
 424
 425 SYNOPSIS
 426         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 427
 428 DESCRIPTION
 429         For a reloc_howto_type that operates on a fixed number of bytes,
 430         this returns the number of bytes operated on.
 431  */
 432
 433 unsigned int
 434 bfd_get_reloc_size (reloc_howto_type *howto)
 435 {
 436   switch (howto->size)
 437     {
 438     case 0: return 1;
 439     case 1: return 2;
 440     case 2: return 4;
 441     case 3: return 0;
 442     case 4: return 8;
 443     case 8: return 16;
 444     case -2: return 4;
 445     default: abort ();
 446     }
 447 }
 448
 449 /*
 450 TYPEDEF
 451         arelent_chain
 452
 453 DESCRIPTION
 454
 455         How relocs are tied together in an <<asection>>:
 456
 457 .typedef struct relent_chain
 458 .{
 459 .  arelent relent;
 460 .  struct relent_chain *next;
 461 .}
 462 .arelent_chain;
 463 .
 464 */
 465
 466 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 467 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 468
 469 /*
 470 FUNCTION
 471         bfd_check_overflow
 472
 473 SYNOPSIS
 474         bfd_reloc_status_type bfd_check_overflow
 475           (enum complain_overflow how,
 476            unsigned int bitsize,
 477            unsigned int rightshift,
 478            unsigned int addrsize,
 479            bfd_vma relocation);
 480
 481 DESCRIPTION
 482         Perform overflow checking on @var{relocation} which has
 483         @var{bitsize} significant bits and will be shifted right by
 484         @var{rightshift} bits, on a machine with addresses containing
 485         @var{addrsize} significant bits.  The result is either of
 486         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 487
 488 */
 489
 490 bfd_reloc_status_type
 491 bfd_check_overflow (enum complain_overflow how,
 492                     unsigned int bitsize,
 493                     unsigned int rightshift,
 494                     unsigned int addrsize,
 495                     bfd_vma relocation)
 496 {
 497   bfd_vma fieldmask, addrmask, signmask, ss, a;
 498   bfd_reloc_status_type flag = bfd_reloc_ok;
 499
 500   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 501      we'll be permissive: extra bits in the field mask will
 502      automatically extend the address mask for purposes of the
 503      overflow check.  */
 504   fieldmask = N_ONES (bitsize);
 505   signmask = ~fieldmask;
 506   addrmask = N_ONES (addrsize) | fieldmask;
 507   a = (relocation & addrmask) >> rightshift;;
 508
 509   switch (how)
 510     {
 511     case complain_overflow_dont:
 512       break;
 513
 514     case complain_overflow_signed:
 515       /* If any sign bits are set, all sign bits must be set.  That
 516          is, A must be a valid negative address after shifting.  */
 517       signmask = ~ (fieldmask >> 1);
 518       /* Fall thru */
 519
 520     case complain_overflow_bitfield:
 521       /* Bitfields are sometimes signed, sometimes unsigned.  We
 522          explicitly allow an address wrap too, which means a bitfield
 523          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 524          if the value has some, but not all, bits set outside the
 525          field.  */
 526       ss = a & signmask;
 527       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 528         flag = bfd_reloc_overflow;
 529       break;
 530
 531     case complain_overflow_unsigned:
 532       /* We have an overflow if the address does not fit in the field.  */
 533       if ((a & signmask) != 0)
 534         flag = bfd_reloc_overflow;
 535       break;
 536
 537     default:
 538       abort ();
 539     }
 540
 541   return flag;
 542 }
 543
 544 /*
 545 FUNCTION
 546         bfd_perform_relocation
 547
 548 SYNOPSIS
 549         bfd_reloc_status_type bfd_perform_relocation
 550           (bfd *abfd,
 551            arelent *reloc_entry,
 552            void *data,
 553            asection *input_section,
 554            bfd *output_bfd,
 555            char **error_message);
 556
 557 DESCRIPTION
 558         If @var{output_bfd} is supplied to this function, the
 559         generated image will be relocatable; the relocations are
 560         copied to the output file after they have been changed to
 561         reflect the new state of the world. There are two ways of
 562         reflecting the results of partial linkage in an output file:
 563         by modifying the output data in place, and by modifying the
 564         relocation record.  Some native formats (e.g., basic a.out and
 565         basic coff) have no way of specifying an addend in the
 566         relocation type, so the addend has to go in the output data.
 567         This is no big deal since in these formats the output data
 568         slot will always be big enough for the addend. Complex reloc
 569         types with addends were invented to solve just this problem.
 570         The @var{error_message} argument is set to an error message if
 571         this return @code{bfd_reloc_dangerous}.
 572
 573 */
 574
 575 bfd_reloc_status_type
 576 bfd_perform_relocation (bfd *abfd,
 577                         arelent *reloc_entry,
 578                         void *data,
 579                         asection *input_section,
 580                         bfd *output_bfd,
 581                         char **error_message)
 582 {
 583   bfd_vma relocation;
 584   bfd_reloc_status_type flag = bfd_reloc_ok;
 585   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 586   bfd_vma output_base = 0;
 587   reloc_howto_type *howto = reloc_entry->howto;
 588   asection *reloc_target_output_section;
 589   asymbol *symbol;
 590
 591   symbol = *(reloc_entry->sym_ptr_ptr);
 592   if (bfd_is_abs_section (symbol->section)
 593       && output_bfd != NULL)
 594     {
 595       reloc_entry->address += input_section->output_offset;
 596       return bfd_reloc_ok;
 597     }
 598
 599   /* If we are not producing relocatable output, return an error if
 600      the symbol is not defined.  An undefined weak symbol is
 601      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 602   if (bfd_is_und_section (symbol->section)
 603       && (symbol->flags & BSF_WEAK) == 0
 604       && output_bfd == NULL)
 605     flag = bfd_reloc_undefined;
 606
 607   /* If there is a function supplied to handle this relocation type,
 608      call it.  It'll return `bfd_reloc_continue' if further processing
 609      can be done.  */
 610   if (howto->special_function)
 611     {
 612       bfd_reloc_status_type cont;
 613       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 614                                       input_section, output_bfd,
 615                                       error_message);
 616       if (cont != bfd_reloc_continue)
 617         return cont;
 618     }
 619
 620   /* Is the address of the relocation really within the section?  */
 621   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 622     return bfd_reloc_outofrange;
 623
 624   /* Work out which section the relocation is targeted at and the
 625      initial relocation command value.  */
 626
 627   /* Get symbol value.  (Common symbols are special.)  */
 628   if (bfd_is_com_section (symbol->section))
 629     relocation = 0;
 630   else
 631     relocation = symbol->value;
 632
 633   reloc_target_output_section = symbol->section->output_section;
 634
 635   /* Convert input-section-relative symbol value to absolute.  */
 636   if ((output_bfd && ! howto->partial_inplace)
 637       || reloc_target_output_section == NULL)
 638     output_base = 0;
 639   else
 640     output_base = reloc_target_output_section->vma;
 641
 642   relocation += output_base + symbol->section->output_offset;
 643
 644   /* Add in supplied addend.  */
 645   relocation += reloc_entry->addend;
 646
 647   /* Here the variable relocation holds the final address of the
 648      symbol we are relocating against, plus any addend.  */
 649
 650   if (howto->pc_relative)
 651     {
 652       /* This is a PC relative relocation.  We want to set RELOCATION
 653          to the distance between the address of the symbol and the
 654          location.  RELOCATION is already the address of the symbol.
 655
 656          We start by subtracting the address of the section containing
 657          the location.
 658
 659          If pcrel_offset is set, we must further subtract the position
 660          of the location within the section.  Some targets arrange for
 661          the addend to be the negative of the position of the location
 662          within the section; for example, i386-aout does this.  For
 663          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 664          include the position of the location; for example, m88kbcs,
 665          or ELF.  For those targets, pcrel_offset is TRUE.
 666
 667          If we are producing relocatable output, then we must ensure
 668          that this reloc will be correctly computed when the final
 669          relocation is done.  If pcrel_offset is FALSE we want to wind
 670          up with the negative of the location within the section,
 671          which means we must adjust the existing addend by the change
 672          in the location within the section.  If pcrel_offset is TRUE
 673          we do not want to adjust the existing addend at all.
 674
 675          FIXME: This seems logical to me, but for the case of
 676          producing relocatable output it is not what the code
 677          actually does.  I don't want to change it, because it seems
 678          far too likely that something will break.  */
 679
 680       relocation -=
 681         input_section->output_section->vma + input_section->output_offset;
 682
 683       if (howto->pcrel_offset)
 684         relocation -= reloc_entry->address;
 685     }
 686
 687   if (output_bfd != NULL)
 688     {
 689       if (! howto->partial_inplace)
 690         {
 691           /* This is a partial relocation, and we want to apply the relocation
 692              to the reloc entry rather than the raw data. Modify the reloc
 693              inplace to reflect what we now know.  */
 694           reloc_entry->addend = relocation;
 695           reloc_entry->address += input_section->output_offset;
 696           return flag;
 697         }
 698       else
 699         {
 700           /* This is a partial relocation, but inplace, so modify the
 701              reloc record a bit.
 702
 703              If we've relocated with a symbol with a section, change
 704              into a ref to the section belonging to the symbol.  */
 705
 706           reloc_entry->address += input_section->output_offset;
 707
 708           /* WTF?? */
 709           if (abfd->xvec->flavour == bfd_target_coff_flavour
 710               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 711               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 712             {
 713               /* For m68k-coff, the addend was being subtracted twice during
 714                  relocation with -r.  Removing the line below this comment
 715                  fixes that problem; see PR 2953.
 716
 717 However, Ian wrote the following, regarding removing the line below,
 718 which explains why it is still enabled:  --djm
 719
 720 If you put a patch like that into BFD you need to check all the COFF
 721 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 722 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 723 problem in a different way.  There may very well be a reason that the
 724 code works as it does.
 725
 726 Hmmm.  The first obvious point is that bfd_perform_relocation should
 727 not have any tests that depend upon the flavour.  It's seem like
 728 entirely the wrong place for such a thing.  The second obvious point
 729 is that the current code ignores the reloc addend when producing
 730 relocatable output for COFF.  That's peculiar.  In fact, I really
 731 have no idea what the point of the line you want to remove is.
 732
 733 A typical COFF reloc subtracts the old value of the symbol and adds in
 734 the new value to the location in the object file (if it's a pc
 735 relative reloc it adds the difference between the symbol value and the
 736 location).  When relocating we need to preserve that property.
 737
 738 BFD handles this by setting the addend to the negative of the old
 739 value of the symbol.  Unfortunately it handles common symbols in a
 740 non-standard way (it doesn't subtract the old value) but that's a
 741 different story (we can't change it without losing backward
 742 compatibility with old object files) (coff-i386 does subtract the old
 743 value, to be compatible with existing coff-i386 targets, like SCO).
 744
 745 So everything works fine when not producing relocatable output.  When
 746 we are producing relocatable output, logically we should do exactly
 747 what we do when not producing relocatable output.  Therefore, your
 748 patch is correct.  In fact, it should probably always just set
 749 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 750 add the value into the object file.  This won't hurt the COFF code,
 751 which doesn't use the addend; I'm not sure what it will do to other
 752 formats (the thing to check for would be whether any formats both use
 753 the addend and set partial_inplace).
 754
 755 When I wanted to make coff-i386 produce relocatable output, I ran
 756 into the problem that you are running into: I wanted to remove that
 757 line.  Rather than risk it, I made the coff-i386 relocs use a special
 758 function; it's coff_i386_reloc in coff-i386.c.  The function
 759 specifically adds the addend field into the object file, knowing that
 760 bfd_perform_relocation is not going to.  If you remove that line, then
 761 coff-i386.c will wind up adding the addend field in twice.  It's
 762 trivial to fix; it just needs to be done.
 763
 764 The problem with removing the line is just that it may break some
 765 working code.  With BFD it's hard to be sure of anything.  The right
 766 way to deal with this is simply to build and test at least all the
 767 supported COFF targets.  It should be straightforward if time and disk
 768 space consuming.  For each target:
 769     1) build the linker
 770     2) generate some executable, and link it using -r (I would
 771        probably use paranoia.o and link against newlib/libc.a, which
 772        for all the supported targets would be available in
 773        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 774     3) make the change to reloc.c
 775     4) rebuild the linker
 776     5) repeat step 2
 777     6) if the resulting object files are the same, you have at least
 778        made it no worse
 779     7) if they are different you have to figure out which version is
 780        right
 781 */
 782               relocation -= reloc_entry->addend;
 783               reloc_entry->addend = 0;
 784             }
 785           else
 786             {
 787               reloc_entry->addend = relocation;
 788             }
 789         }
 790     }
 791   else
 792     {
 793       reloc_entry->addend = 0;
 794     }
 795
 796   /* FIXME: This overflow checking is incomplete, because the value
 797      might have overflowed before we get here.  For a correct check we
 798      need to compute the value in a size larger than bitsize, but we
 799      can't reasonably do that for a reloc the same size as a host
 800      machine word.
 801      FIXME: We should also do overflow checking on the result after
 802      adding in the value contained in the object file.  */
 803   if (howto->complain_on_overflow != complain_overflow_dont
 804       && flag == bfd_reloc_ok)
 805     flag = bfd_check_overflow (howto->complain_on_overflow,
 806                                howto->bitsize,
 807                                howto->rightshift,
 808                                bfd_arch_bits_per_address (abfd),
 809                                relocation);
 810
 811   /* Either we are relocating all the way, or we don't want to apply
 812      the relocation to the reloc entry (probably because there isn't
 813      any room in the output format to describe addends to relocs).  */
 814
 815   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 816      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 817      following program:
 818
 819      struct str
 820      {
 821        unsigned int i0;
 822      } s = { 0 };
 823
 824      int
 825      main ()
 826      {
 827        unsigned long x;
 828
 829        x = 0x100000000;
 830        x <<= (unsigned long) s.i0;
 831        if (x == 0)
 832          printf ("failed\n");
 833        else
 834          printf ("succeeded (%lx)\n", x);
 835      }
 836      */
 837
 838   relocation >>= (bfd_vma) howto->rightshift;
 839
 840   /* Shift everything up to where it's going to be used.  */
 841   relocation <<= (bfd_vma) howto->bitpos;
 842
 843   /* Wait for the day when all have the mask in them.  */
 844
 845   /* What we do:
 846      i instruction to be left alone
 847      o offset within instruction
 848      r relocation offset to apply
 849      S src mask
 850      D dst mask
 851      N ~dst mask
 852      A part 1
 853      B part 2
 854      R result
 855
 856      Do this:
 857      ((  i i i i i o o o o o  from bfd_get<size>
 858      and           S S S S S) to get the size offset we want
 859      +   r r r r r r r r r r) to get the final value to place
 860      and           D D D D D  to chop to right size
 861      -----------------------
 862      =             A A A A A
 863      And this:
 864      (   i i i i i o o o o o  from bfd_get<size>
 865      and N N N N N          ) get instruction
 866      -----------------------
 867      =   B B B B B
 868
 869      And then:
 870      (   B B B B B
 871      or            A A A A A)
 872      -----------------------
 873      =   R R R R R R R R R R  put into bfd_put<size>
 874      */
 875
 876 #define DOIT(x) \
 877   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 878
 879   switch (howto->size)
 880     {
 881     case 0:
 882       {
 883         char x = bfd_get_8 (abfd, (char *) data + octets);
 884         DOIT (x);
 885         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 886       }
 887       break;
 888
 889     case 1:
 890       {
 891         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 892         DOIT (x);
 893         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 894       }
 895       break;
 896     case 2:
 897       {
 898         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 899         DOIT (x);
 900         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 901       }
 902       break;
 903     case -2:
 904       {
 905         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 906         relocation = -relocation;
 907         DOIT (x);
 908         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 909       }
 910       break;
 911
 912     case -1:
 913       {
 914         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 915         relocation = -relocation;
 916         DOIT (x);
 917         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 918       }
 919       break;
 920
 921     case 3:
 922       /* Do nothing */
 923       break;
 924
 925     case 4:
 926 #ifdef BFD64
 927       {
 928         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 929         DOIT (x);
 930         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 931       }
 932 #else
 933       abort ();
 934 #endif
 935       break;
 936     default:
 937       return bfd_reloc_other;
 938     }
 939
 940   return flag;
 941 }
 942
 943 /*
 944 FUNCTION
 945         bfd_install_relocation
 946
 947 SYNOPSIS
 948         bfd_reloc_status_type bfd_install_relocation
 949           (bfd *abfd,
 950            arelent *reloc_entry,
 951            void *data, bfd_vma data_start,
 952            asection *input_section,
 953            char **error_message);
 954
 955 DESCRIPTION
 956         This looks remarkably like <<bfd_perform_relocation>>, except it
 957         does not expect that the section contents have been filled in.
 958         I.e., it's suitable for use when creating, rather than applying
 959         a relocation.
 960
 961         For now, this function should be considered reserved for the
 962         assembler.
 963 */
 964
 965 bfd_reloc_status_type
 966 bfd_install_relocation (bfd *abfd,
 967                         arelent *reloc_entry,
 968                         void *data_start,
 969                         bfd_vma data_start_offset,
 970                         asection *input_section,
 971                         char **error_message)
 972 {
 973   bfd_vma relocation;
 974   bfd_reloc_status_type flag = bfd_reloc_ok;
 975   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 976   bfd_vma output_base = 0;
 977   reloc_howto_type *howto = reloc_entry->howto;
 978   asection *reloc_target_output_section;
 979   asymbol *symbol;
 980   bfd_byte *data;
 981
 982   symbol = *(reloc_entry->sym_ptr_ptr);
 983   if (bfd_is_abs_section (symbol->section))
 984     {
 985       reloc_entry->address += input_section->output_offset;
 986       return bfd_reloc_ok;
 987     }
 988
 989   /* If there is a function supplied to handle this relocation type,
 990      call it.  It'll return `bfd_reloc_continue' if further processing
 991      can be done.  */
 992   if (howto->special_function)
 993     {
 994       bfd_reloc_status_type cont;
 995
 996       /* XXX - The special_function calls haven't been fixed up to deal
 997          with creating new relocations and section contents.  */
 998       cont = howto->special_function (abfd, reloc_entry, symbol,
 999                                       /* XXX - Non-portable! */
1000                                       ((bfd_byte *) data_start
1001                                        - data_start_offset),
1002                                       input_section, abfd, error_message);
1003       if (cont != bfd_reloc_continue)
1004         return cont;
1005     }
1006
1007   /* Is the address of the relocation really within the section?  */
1008   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1009     return bfd_reloc_outofrange;
1010
1011   /* Work out which section the relocation is targeted at and the
1012      initial relocation command value.  */
1013
1014   /* Get symbol value.  (Common symbols are special.)  */
1015   if (bfd_is_com_section (symbol->section))
1016     relocation = 0;
1017   else
1018     relocation = symbol->value;
1019
1020   reloc_target_output_section = symbol->section->output_section;
1021
1022   /* Convert input-section-relative symbol value to absolute.  */
1023   if (! howto->partial_inplace)
1024     output_base = 0;
1025   else
1026     output_base = reloc_target_output_section->vma;
1027
1028   relocation += output_base + symbol->section->output_offset;
1029
1030   /* Add in supplied addend.  */
1031   relocation += reloc_entry->addend;
1032
1033   /* Here the variable relocation holds the final address of the
1034      symbol we are relocating against, plus any addend.  */
1035
1036   if (howto->pc_relative)
1037     {
1038       /* This is a PC relative relocation.  We want to set RELOCATION
1039          to the distance between the address of the symbol and the
1040          location.  RELOCATION is already the address of the symbol.
1041
1042          We start by subtracting the address of the section containing
1043          the location.
1044
1045          If pcrel_offset is set, we must further subtract the position
1046          of the location within the section.  Some targets arrange for
1047          the addend to be the negative of the position of the location
1048          within the section; for example, i386-aout does this.  For
1049          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1050          include the position of the location; for example, m88kbcs,
1051          or ELF.  For those targets, pcrel_offset is TRUE.
1052
1053          If we are producing relocatable output, then we must ensure
1054          that this reloc will be correctly computed when the final
1055          relocation is done.  If pcrel_offset is FALSE we want to wind
1056          up with the negative of the location within the section,
1057          which means we must adjust the existing addend by the change
1058          in the location within the section.  If pcrel_offset is TRUE
1059          we do not want to adjust the existing addend at all.
1060
1061          FIXME: This seems logical to me, but for the case of
1062          producing relocatable output it is not what the code
1063          actually does.  I don't want to change it, because it seems
1064          far too likely that something will break.  */
1065
1066       relocation -=
1067         input_section->output_section->vma + input_section->output_offset;
1068
1069       if (howto->pcrel_offset && howto->partial_inplace)
1070         relocation -= reloc_entry->address;
1071     }
1072
1073   if (! howto->partial_inplace)
1074     {
1075       /* This is a partial relocation, and we want to apply the relocation
1076          to the reloc entry rather than the raw data. Modify the reloc
1077          inplace to reflect what we now know.  */
1078       reloc_entry->addend = relocation;
1079       reloc_entry->address += input_section->output_offset;
1080       return flag;
1081     }
1082   else
1083     {
1084       /* This is a partial relocation, but inplace, so modify the
1085          reloc record a bit.
1086
1087          If we've relocated with a symbol with a section, change
1088          into a ref to the section belonging to the symbol.  */
1089       reloc_entry->address += input_section->output_offset;
1090
1091       /* WTF?? */
1092       if (abfd->xvec->flavour == bfd_target_coff_flavour
1093           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1094           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1095         {
1096
1097           /* For m68k-coff, the addend was being subtracted twice during
1098              relocation with -r.  Removing the line below this comment
1099              fixes that problem; see PR 2953.
1100
1101 However, Ian wrote the following, regarding removing the line below,
1102 which explains why it is still enabled:  --djm
1103
1104 If you put a patch like that into BFD you need to check all the COFF
1105 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1106 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1107 problem in a different way.  There may very well be a reason that the
1108 code works as it does.
1109
1110 Hmmm.  The first obvious point is that bfd_install_relocation should
1111 not have any tests that depend upon the flavour.  It's seem like
1112 entirely the wrong place for such a thing.  The second obvious point
1113 is that the current code ignores the reloc addend when producing
1114 relocatable output for COFF.  That's peculiar.  In fact, I really
1115 have no idea what the point of the line you want to remove is.
1116
1117 A typical COFF reloc subtracts the old value of the symbol and adds in
1118 the new value to the location in the object file (if it's a pc
1119 relative reloc it adds the difference between the symbol value and the
1120 location).  When relocating we need to preserve that property.
1121
1122 BFD handles this by setting the addend to the negative of the old
1123 value of the symbol.  Unfortunately it handles common symbols in a
1124 non-standard way (it doesn't subtract the old value) but that's a
1125 different story (we can't change it without losing backward
1126 compatibility with old object files) (coff-i386 does subtract the old
1127 value, to be compatible with existing coff-i386 targets, like SCO).
1128
1129 So everything works fine when not producing relocatable output.  When
1130 we are producing relocatable output, logically we should do exactly
1131 what we do when not producing relocatable output.  Therefore, your
1132 patch is correct.  In fact, it should probably always just set
1133 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1134 add the value into the object file.  This won't hurt the COFF code,
1135 which doesn't use the addend; I'm not sure what it will do to other
1136 formats (the thing to check for would be whether any formats both use
1137 the addend and set partial_inplace).
1138
1139 When I wanted to make coff-i386 produce relocatable output, I ran
1140 into the problem that you are running into: I wanted to remove that
1141 line.  Rather than risk it, I made the coff-i386 relocs use a special
1142 function; it's coff_i386_reloc in coff-i386.c.  The function
1143 specifically adds the addend field into the object file, knowing that
1144 bfd_install_relocation is not going to.  If you remove that line, then
1145 coff-i386.c will wind up adding the addend field in twice.  It's
1146 trivial to fix; it just needs to be done.
1147
1148 The problem with removing the line is just that it may break some
1149 working code.  With BFD it's hard to be sure of anything.  The right
1150 way to deal with this is simply to build and test at least all the
1151 supported COFF targets.  It should be straightforward if time and disk
1152 space consuming.  For each target:
1153     1) build the linker
1154     2) generate some executable, and link it using -r (I would
1155        probably use paranoia.o and link against newlib/libc.a, which
1156        for all the supported targets would be available in
1157        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1158     3) make the change to reloc.c
1159     4) rebuild the linker
1160     5) repeat step 2
1161     6) if the resulting object files are the same, you have at least
1162        made it no worse
1163     7) if they are different you have to figure out which version is
1164        right.  */
1165           relocation -= reloc_entry->addend;
1166           /* FIXME: There should be no target specific code here...  */
1167           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1168             reloc_entry->addend = 0;
1169         }
1170       else
1171         {
1172           reloc_entry->addend = relocation;
1173         }
1174     }
1175
1176   /* FIXME: This overflow checking is incomplete, because the value
1177      might have overflowed before we get here.  For a correct check we
1178      need to compute the value in a size larger than bitsize, but we
1179      can't reasonably do that for a reloc the same size as a host
1180      machine word.
1181      FIXME: We should also do overflow checking on the result after
1182      adding in the value contained in the object file.  */
1183   if (howto->complain_on_overflow != complain_overflow_dont)
1184     flag = bfd_check_overflow (howto->complain_on_overflow,
1185                                howto->bitsize,
1186                                howto->rightshift,
1187                                bfd_arch_bits_per_address (abfd),
1188                                relocation);
1189
1190   /* Either we are relocating all the way, or we don't want to apply
1191      the relocation to the reloc entry (probably because there isn't
1192      any room in the output format to describe addends to relocs).  */
1193
1194   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1195      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1196      following program:
1197
1198      struct str
1199      {
1200        unsigned int i0;
1201      } s = { 0 };
1202
1203      int
1204      main ()
1205      {
1206        unsigned long x;
1207
1208        x = 0x100000000;
1209        x <<= (unsigned long) s.i0;
1210        if (x == 0)
1211          printf ("failed\n");
1212        else
1213          printf ("succeeded (%lx)\n", x);
1214      }
1215      */
1216
1217   relocation >>= (bfd_vma) howto->rightshift;
1218
1219   /* Shift everything up to where it's going to be used.  */
1220   relocation <<= (bfd_vma) howto->bitpos;
1221
1222   /* Wait for the day when all have the mask in them.  */
1223
1224   /* What we do:
1225      i instruction to be left alone
1226      o offset within instruction
1227      r relocation offset to apply
1228      S src mask
1229      D dst mask
1230      N ~dst mask
1231      A part 1
1232      B part 2
1233      R result
1234
1235      Do this:
1236      ((  i i i i i o o o o o  from bfd_get<size>
1237      and           S S S S S) to get the size offset we want
1238      +   r r r r r r r r r r) to get the final value to place
1239      and           D D D D D  to chop to right size
1240      -----------------------
1241      =             A A A A A
1242      And this:
1243      (   i i i i i o o o o o  from bfd_get<size>
1244      and N N N N N          ) get instruction
1245      -----------------------
1246      =   B B B B B
1247
1248      And then:
1249      (   B B B B B
1250      or            A A A A A)
1251      -----------------------
1252      =   R R R R R R R R R R  put into bfd_put<size>
1253      */
1254
1255 #define DOIT(x) \
1256   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1257
1258   data = (bfd_byte *) data_start + (octets - data_start_offset);
1259
1260   switch (howto->size)
1261     {
1262     case 0:
1263       {
1264         char x = bfd_get_8 (abfd, data);
1265         DOIT (x);
1266         bfd_put_8 (abfd, x, data);
1267       }
1268       break;
1269
1270     case 1:
1271       {
1272         short x = bfd_get_16 (abfd, data);
1273         DOIT (x);
1274         bfd_put_16 (abfd, (bfd_vma) x, data);
1275       }
1276       break;
1277     case 2:
1278       {
1279         long x = bfd_get_32 (abfd, data);
1280         DOIT (x);
1281         bfd_put_32 (abfd, (bfd_vma) x, data);
1282       }
1283       break;
1284     case -2:
1285       {
1286         long x = bfd_get_32 (abfd, data);
1287         relocation = -relocation;
1288         DOIT (x);
1289         bfd_put_32 (abfd, (bfd_vma) x, data);
1290       }
1291       break;
1292
1293     case 3:
1294       /* Do nothing */
1295       break;
1296
1297     case 4:
1298       {
1299         bfd_vma x = bfd_get_64 (abfd, data);
1300         DOIT (x);
1301         bfd_put_64 (abfd, x, data);
1302       }
1303       break;
1304     default:
1305       return bfd_reloc_other;
1306     }
1307
1308   return flag;
1309 }
1310
1311 /* This relocation routine is used by some of the backend linkers.
1312    They do not construct asymbol or arelent structures, so there is no
1313    reason for them to use bfd_perform_relocation.  Also,
1314    bfd_perform_relocation is so hacked up it is easier to write a new
1315    function than to try to deal with it.
1316
1317    This routine does a final relocation.  Whether it is useful for a
1318    relocatable link depends upon how the object format defines
1319    relocations.
1320
1321    FIXME: This routine ignores any special_function in the HOWTO,
1322    since the existing special_function values have been written for
1323    bfd_perform_relocation.
1324
1325    HOWTO is the reloc howto information.
1326    INPUT_BFD is the BFD which the reloc applies to.
1327    INPUT_SECTION is the section which the reloc applies to.
1328    CONTENTS is the contents of the section.
1329    ADDRESS is the address of the reloc within INPUT_SECTION.
1330    VALUE is the value of the symbol the reloc refers to.
1331    ADDEND is the addend of the reloc.  */
1332
1333 bfd_reloc_status_type
1334 _bfd_final_link_relocate (reloc_howto_type *howto,
1335                           bfd *input_bfd,
1336                           asection *input_section,
1337                           bfd_byte *contents,
1338                           bfd_vma address,
1339                           bfd_vma value,
1340                           bfd_vma addend)
1341 {
1342   bfd_vma relocation;
1343
1344   /* Sanity check the address.  */
1345   if (address > bfd_get_section_limit (input_bfd, input_section))
1346     return bfd_reloc_outofrange;
1347
1348   /* This function assumes that we are dealing with a basic relocation
1349      against a symbol.  We want to compute the value of the symbol to
1350      relocate to.  This is just VALUE, the value of the symbol, plus
1351      ADDEND, any addend associated with the reloc.  */
1352   relocation = value + addend;
1353
1354   /* If the relocation is PC relative, we want to set RELOCATION to
1355      the distance between the symbol (currently in RELOCATION) and the
1356      location we are relocating.  Some targets (e.g., i386-aout)
1357      arrange for the contents of the section to be the negative of the
1358      offset of the location within the section; for such targets
1359      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1360      simply leave the contents of the section as zero; for such
1361      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1362      need to subtract out the offset of the location within the
1363      section (which is just ADDRESS).  */
1364   if (howto->pc_relative)
1365     {
1366       relocation -= (input_section->output_section->vma
1367                      + input_section->output_offset);
1368       if (howto->pcrel_offset)
1369         relocation -= address;
1370     }
1371
1372   return _bfd_relocate_contents (howto, input_bfd, relocation,
1373                                  contents + address);
1374 }
1375
1376 /* Relocate a given location using a given value and howto.  */
1377
1378 bfd_reloc_status_type
1379 _bfd_relocate_contents (reloc_howto_type *howto,
1380                         bfd *input_bfd,
1381                         bfd_vma relocation,
1382                         bfd_byte *location)
1383 {
1384   int size;
1385   bfd_vma x = 0;
1386   bfd_reloc_status_type flag;
1387   unsigned int rightshift = howto->rightshift;
1388   unsigned int bitpos = howto->bitpos;
1389
1390   /* If the size is negative, negate RELOCATION.  This isn't very
1391      general.  */
1392   if (howto->size < 0)
1393     relocation = -relocation;
1394
1395   /* Get the value we are going to relocate.  */
1396   size = bfd_get_reloc_size (howto);
1397   switch (size)
1398     {
1399     default:
1400     case 0:
1401       abort ();
1402     case 1:
1403       x = bfd_get_8 (input_bfd, location);
1404       break;
1405     case 2:
1406       x = bfd_get_16 (input_bfd, location);
1407       break;
1408     case 4:
1409       x = bfd_get_32 (input_bfd, location);
1410       break;
1411     case 8:
1412 #ifdef BFD64
1413       x = bfd_get_64 (input_bfd, location);
1414 #else
1415       abort ();
1416 #endif
1417       break;
1418     }
1419
1420   /* Check for overflow.  FIXME: We may drop bits during the addition
1421      which we don't check for.  We must either check at every single
1422      operation, which would be tedious, or we must do the computations
1423      in a type larger than bfd_vma, which would be inefficient.  */
1424   flag = bfd_reloc_ok;
1425   if (howto->complain_on_overflow != complain_overflow_dont)
1426     {
1427       bfd_vma addrmask, fieldmask, signmask, ss;
1428       bfd_vma a, b, sum;
1429
1430       /* Get the values to be added together.  For signed and unsigned
1431          relocations, we assume that all values should be truncated to
1432          the size of an address.  For bitfields, all the bits matter.
1433          See also bfd_check_overflow.  */
1434       fieldmask = N_ONES (howto->bitsize);
1435       signmask = ~fieldmask;
1436       addrmask = N_ONES (bfd_arch_bits_per_address (input_bfd)) | fieldmask;
1437       a = (relocation & addrmask) >> rightshift;
1438       b = (x & howto->src_mask & addrmask) >> bitpos;
1439
1440       switch (howto->complain_on_overflow)
1441         {
1442         case complain_overflow_signed:
1443           /* If any sign bits are set, all sign bits must be set.
1444              That is, A must be a valid negative address after
1445              shifting.  */
1446           signmask = ~(fieldmask >> 1);
1447           /* Fall thru */
1448
1449         case complain_overflow_bitfield:
1450           /* Much like the signed check, but for a field one bit
1451              wider.  We allow a bitfield to represent numbers in the
1452              range -2**n to 2**n-1, where n is the number of bits in the
1453              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1454              can't overflow, which is exactly what we want.  */
1455           ss = a & signmask;
1456           if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
1457             flag = bfd_reloc_overflow;
1458
1459           /* We only need this next bit of code if the sign bit of B
1460              is below the sign bit of A.  This would only happen if
1461              SRC_MASK had fewer bits than BITSIZE.  Note that if
1462              SRC_MASK has more bits than BITSIZE, we can get into
1463              trouble; we would need to verify that B is in range, as
1464              we do for A above.  */
1465           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1466           ss >>= bitpos;
1467
1468           /* Set all the bits above the sign bit.  */
1469           b = (b ^ ss) - ss;
1470
1471           /* Now we can do the addition.  */
1472           sum = a + b;
1473
1474           /* See if the result has the correct sign.  Bits above the
1475              sign bit are junk now; ignore them.  If the sum is
1476              positive, make sure we did not have all negative inputs;
1477              if the sum is negative, make sure we did not have all
1478              positive inputs.  The test below looks only at the sign
1479              bits, and it really just
1480                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1481
1482              We mask with addrmask here to explicitly allow an address
1483              wrap-around.  The Linux kernel relies on it, and it is
1484              the only way to write assembler code which can run when
1485              loaded at a location 0x80000000 away from the location at
1486              which it is linked.  */
1487           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1488             flag = bfd_reloc_overflow;
1489           break;
1490
1491         case complain_overflow_unsigned:
1492           /* Checking for an unsigned overflow is relatively easy:
1493              trim the addresses and add, and trim the result as well.
1494              Overflow is normally indicated when the result does not
1495              fit in the field.  However, we also need to consider the
1496              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1497              input is 0x80000000, and bfd_vma is only 32 bits; then we
1498              will get sum == 0, but there is an overflow, since the
1499              inputs did not fit in the field.  Instead of doing a
1500              separate test, we can check for this by or-ing in the
1501              operands when testing for the sum overflowing its final
1502              field.  */
1503           sum = (a + b) & addrmask;
1504           if ((a | b | sum) & signmask)
1505             flag = bfd_reloc_overflow;
1506           break;
1507
1508         default:
1509           abort ();
1510         }
1511     }
1512
1513   /* Put RELOCATION in the right bits.  */
1514   relocation >>= (bfd_vma) rightshift;
1515   relocation <<= (bfd_vma) bitpos;
1516
1517   /* Add RELOCATION to the right bits of X.  */
1518   x = ((x & ~howto->dst_mask)
1519        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1520
1521   /* Put the relocated value back in the object file.  */
1522   switch (size)
1523     {
1524     default:
1525     case 0:
1526       abort ();
1527     case 1:
1528       bfd_put_8 (input_bfd, x, location);
1529       break;
1530     case 2:
1531       bfd_put_16 (input_bfd, x, location);
1532       break;
1533     case 4:
1534       bfd_put_32 (input_bfd, x, location);
1535       break;
1536     case 8:
1537 #ifdef BFD64
1538       bfd_put_64 (input_bfd, x, location);
1539 #else
1540       abort ();
1541 #endif
1542       break;
1543     }
1544
1545   return flag;
1546 }
1547
1548 /*
1549 DOCDD
1550 INODE
1551         howto manager,  , typedef arelent, Relocations
1552
1553 SUBSECTION
1554         The howto manager
1555
1556         When an application wants to create a relocation, but doesn't
1557         know what the target machine might call it, it can find out by
1558         using this bit of code.
1559
1560 */
1561
1562 /*
1563 TYPEDEF
1564         bfd_reloc_code_type
1565
1566 DESCRIPTION
1567         The insides of a reloc code.  The idea is that, eventually, there
1568         will be one enumerator for every type of relocation we ever do.
1569         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1570         return a howto pointer.
1571
1572         This does mean that the application must determine the correct
1573         enumerator value; you can't get a howto pointer from a random set
1574         of attributes.
1575
1576 SENUM
1577    bfd_reloc_code_real
1578
1579 ENUM
1580   BFD_RELOC_64
1581 ENUMX
1582   BFD_RELOC_32
1583 ENUMX
1584   BFD_RELOC_26
1585 ENUMX
1586   BFD_RELOC_24
1587 ENUMX
1588   BFD_RELOC_16
1589 ENUMX
1590   BFD_RELOC_14
1591 ENUMX
1592   BFD_RELOC_8
1593 ENUMDOC
1594   Basic absolute relocations of N bits.
1595
1596 ENUM
1597   BFD_RELOC_64_PCREL
1598 ENUMX
1599   BFD_RELOC_32_PCREL
1600 ENUMX
1601   BFD_RELOC_24_PCREL
1602 ENUMX
1603   BFD_RELOC_16_PCREL
1604 ENUMX
1605   BFD_RELOC_12_PCREL
1606 ENUMX
1607   BFD_RELOC_8_PCREL
1608 ENUMDOC
1609   PC-relative relocations.  Sometimes these are relative to the address
1610 of the relocation itself; sometimes they are relative to the start of
1611 the section containing the relocation.  It depends on the specific target.
1612
1613 The 24-bit relocation is used in some Intel 960 configurations.
1614
1615 ENUM
1616   BFD_RELOC_32_SECREL
1617 ENUMDOC
1618   Section relative relocations.  Some targets need this for DWARF2.
1619
1620 ENUM
1621   BFD_RELOC_32_GOT_PCREL
1622 ENUMX
1623   BFD_RELOC_16_GOT_PCREL
1624 ENUMX
1625   BFD_RELOC_8_GOT_PCREL
1626 ENUMX
1627   BFD_RELOC_32_GOTOFF
1628 ENUMX
1629   BFD_RELOC_16_GOTOFF
1630 ENUMX
1631   BFD_RELOC_LO16_GOTOFF
1632 ENUMX
1633   BFD_RELOC_HI16_GOTOFF
1634 ENUMX
1635   BFD_RELOC_HI16_S_GOTOFF
1636 ENUMX
1637   BFD_RELOC_8_GOTOFF
1638 ENUMX
1639   BFD_RELOC_64_PLT_PCREL
1640 ENUMX
1641   BFD_RELOC_32_PLT_PCREL
1642 ENUMX
1643   BFD_RELOC_24_PLT_PCREL
1644 ENUMX
1645   BFD_RELOC_16_PLT_PCREL
1646 ENUMX
1647   BFD_RELOC_8_PLT_PCREL
1648 ENUMX
1649   BFD_RELOC_64_PLTOFF
1650 ENUMX
1651   BFD_RELOC_32_PLTOFF
1652 ENUMX
1653   BFD_RELOC_16_PLTOFF
1654 ENUMX
1655   BFD_RELOC_LO16_PLTOFF
1656 ENUMX
1657   BFD_RELOC_HI16_PLTOFF
1658 ENUMX
1659   BFD_RELOC_HI16_S_PLTOFF
1660 ENUMX
1661   BFD_RELOC_8_PLTOFF
1662 ENUMDOC
1663   For ELF.
1664
1665 ENUM
1666   BFD_RELOC_68K_GLOB_DAT
1667 ENUMX
1668   BFD_RELOC_68K_JMP_SLOT
1669 ENUMX
1670   BFD_RELOC_68K_RELATIVE
1671 ENUMDOC
1672   Relocations used by 68K ELF.
1673
1674 ENUM
1675   BFD_RELOC_32_BASEREL
1676 ENUMX
1677   BFD_RELOC_16_BASEREL
1678 ENUMX
1679   BFD_RELOC_LO16_BASEREL
1680 ENUMX
1681   BFD_RELOC_HI16_BASEREL
1682 ENUMX
1683   BFD_RELOC_HI16_S_BASEREL
1684 ENUMX
1685   BFD_RELOC_8_BASEREL
1686 ENUMX
1687   BFD_RELOC_RVA
1688 ENUMDOC
1689   Linkage-table relative.
1690
1691 ENUM
1692   BFD_RELOC_8_FFnn
1693 ENUMDOC
1694   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1695
1696 ENUM
1697   BFD_RELOC_32_PCREL_S2
1698 ENUMX
1699   BFD_RELOC_16_PCREL_S2
1700 ENUMX
1701   BFD_RELOC_23_PCREL_S2
1702 ENUMDOC
1703   These PC-relative relocations are stored as word displacements --
1704 i.e., byte displacements shifted right two bits.  The 30-bit word
1705 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1706 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1707 signed 16-bit displacement is used on the MIPS, and the 23-bit
1708 displacement is used on the Alpha.
1709
1710 ENUM
1711   BFD_RELOC_HI22
1712 ENUMX
1713   BFD_RELOC_LO10
1714 ENUMDOC
1715   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1716 the target word.  These are used on the SPARC.
1717
1718 ENUM
1719   BFD_RELOC_GPREL16
1720 ENUMX
1721   BFD_RELOC_GPREL32
1722 ENUMDOC
1723   For systems that allocate a Global Pointer register, these are
1724 displacements off that register.  These relocation types are
1725 handled specially, because the value the register will have is
1726 decided relatively late.
1727
1728 ENUM
1729   BFD_RELOC_I960_CALLJ
1730 ENUMDOC
1731   Reloc types used for i960/b.out.
1732
1733 ENUM
1734   BFD_RELOC_NONE
1735 ENUMX
1736   BFD_RELOC_SPARC_WDISP22
1737 ENUMX
1738   BFD_RELOC_SPARC22
1739 ENUMX
1740   BFD_RELOC_SPARC13
1741 ENUMX
1742   BFD_RELOC_SPARC_GOT10
1743 ENUMX
1744   BFD_RELOC_SPARC_GOT13
1745 ENUMX
1746   BFD_RELOC_SPARC_GOT22
1747 ENUMX
1748   BFD_RELOC_SPARC_PC10
1749 ENUMX
1750   BFD_RELOC_SPARC_PC22
1751 ENUMX
1752   BFD_RELOC_SPARC_WPLT30
1753 ENUMX
1754   BFD_RELOC_SPARC_COPY
1755 ENUMX
1756   BFD_RELOC_SPARC_GLOB_DAT
1757 ENUMX
1758   BFD_RELOC_SPARC_JMP_SLOT
1759 ENUMX
1760   BFD_RELOC_SPARC_RELATIVE
1761 ENUMX
1762   BFD_RELOC_SPARC_UA16
1763 ENUMX
1764   BFD_RELOC_SPARC_UA32
1765 ENUMX
1766   BFD_RELOC_SPARC_UA64
1767 ENUMDOC
1768   SPARC ELF relocations.  There is probably some overlap with other
1769   relocation types already defined.
1770
1771 ENUM
1772   BFD_RELOC_SPARC_BASE13
1773 ENUMX
1774   BFD_RELOC_SPARC_BASE22
1775 ENUMDOC
1776   I think these are specific to SPARC a.out (e.g., Sun 4).
1777
1778 ENUMEQ
1779   BFD_RELOC_SPARC_64
1780   BFD_RELOC_64
1781 ENUMX
1782   BFD_RELOC_SPARC_10
1783 ENUMX
1784   BFD_RELOC_SPARC_11
1785 ENUMX
1786   BFD_RELOC_SPARC_OLO10
1787 ENUMX
1788   BFD_RELOC_SPARC_HH22
1789 ENUMX
1790   BFD_RELOC_SPARC_HM10
1791 ENUMX
1792   BFD_RELOC_SPARC_LM22
1793 ENUMX
1794   BFD_RELOC_SPARC_PC_HH22
1795 ENUMX
1796   BFD_RELOC_SPARC_PC_HM10
1797 ENUMX
1798   BFD_RELOC_SPARC_PC_LM22
1799 ENUMX
1800   BFD_RELOC_SPARC_WDISP16
1801 ENUMX
1802   BFD_RELOC_SPARC_WDISP19
1803 ENUMX
1804   BFD_RELOC_SPARC_7
1805 ENUMX
1806   BFD_RELOC_SPARC_6
1807 ENUMX
1808   BFD_RELOC_SPARC_5
1809 ENUMEQX
1810   BFD_RELOC_SPARC_DISP64
1811   BFD_RELOC_64_PCREL
1812 ENUMX
1813   BFD_RELOC_SPARC_PLT32
1814 ENUMX
1815   BFD_RELOC_SPARC_PLT64
1816 ENUMX
1817   BFD_RELOC_SPARC_HIX22
1818 ENUMX
1819   BFD_RELOC_SPARC_LOX10
1820 ENUMX
1821   BFD_RELOC_SPARC_H44
1822 ENUMX
1823   BFD_RELOC_SPARC_M44
1824 ENUMX
1825   BFD_RELOC_SPARC_L44
1826 ENUMX
1827   BFD_RELOC_SPARC_REGISTER
1828 ENUMDOC
1829   SPARC64 relocations
1830
1831 ENUM
1832   BFD_RELOC_SPARC_REV32
1833 ENUMDOC
1834   SPARC little endian relocation
1835 ENUM
1836   BFD_RELOC_SPARC_TLS_GD_HI22
1837 ENUMX
1838   BFD_RELOC_SPARC_TLS_GD_LO10
1839 ENUMX
1840   BFD_RELOC_SPARC_TLS_GD_ADD
1841 ENUMX
1842   BFD_RELOC_SPARC_TLS_GD_CALL
1843 ENUMX
1844   BFD_RELOC_SPARC_TLS_LDM_HI22
1845 ENUMX
1846   BFD_RELOC_SPARC_TLS_LDM_LO10
1847 ENUMX
1848   BFD_RELOC_SPARC_TLS_LDM_ADD
1849 ENUMX
1850   BFD_RELOC_SPARC_TLS_LDM_CALL
1851 ENUMX
1852   BFD_RELOC_SPARC_TLS_LDO_HIX22
1853 ENUMX
1854   BFD_RELOC_SPARC_TLS_LDO_LOX10
1855 ENUMX
1856   BFD_RELOC_SPARC_TLS_LDO_ADD
1857 ENUMX
1858   BFD_RELOC_SPARC_TLS_IE_HI22
1859 ENUMX
1860   BFD_RELOC_SPARC_TLS_IE_LO10
1861 ENUMX
1862   BFD_RELOC_SPARC_TLS_IE_LD
1863 ENUMX
1864   BFD_RELOC_SPARC_TLS_IE_LDX
1865 ENUMX
1866   BFD_RELOC_SPARC_TLS_IE_ADD
1867 ENUMX
1868   BFD_RELOC_SPARC_TLS_LE_HIX22
1869 ENUMX
1870   BFD_RELOC_SPARC_TLS_LE_LOX10
1871 ENUMX
1872   BFD_RELOC_SPARC_TLS_DTPMOD32
1873 ENUMX
1874   BFD_RELOC_SPARC_TLS_DTPMOD64
1875 ENUMX
1876   BFD_RELOC_SPARC_TLS_DTPOFF32
1877 ENUMX
1878   BFD_RELOC_SPARC_TLS_DTPOFF64
1879 ENUMX
1880   BFD_RELOC_SPARC_TLS_TPOFF32
1881 ENUMX
1882   BFD_RELOC_SPARC_TLS_TPOFF64
1883 ENUMDOC
1884   SPARC TLS relocations
1885
1886 ENUM
1887   BFD_RELOC_ALPHA_GPDISP_HI16
1888 ENUMDOC
1889   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
1890      "addend" in some special way.
1891   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1892      writing; when reading, it will be the absolute section symbol.  The
1893      addend is the displacement in bytes of the "lda" instruction from
1894      the "ldah" instruction (which is at the address of this reloc).
1895 ENUM
1896   BFD_RELOC_ALPHA_GPDISP_LO16
1897 ENUMDOC
1898   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1899      with GPDISP_HI16 relocs.  The addend is ignored when writing the
1900      relocations out, and is filled in with the file's GP value on
1901      reading, for convenience.
1902
1903 ENUM
1904   BFD_RELOC_ALPHA_GPDISP
1905 ENUMDOC
1906   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
1907      relocation except that there is no accompanying GPDISP_LO16
1908      relocation.
1909
1910 ENUM
1911   BFD_RELOC_ALPHA_LITERAL
1912 ENUMX
1913   BFD_RELOC_ALPHA_ELF_LITERAL
1914 ENUMX
1915   BFD_RELOC_ALPHA_LITUSE
1916 ENUMDOC
1917   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
1918      the assembler turns it into a LDQ instruction to load the address of
1919      the symbol, and then fills in a register in the real instruction.
1920
1921      The LITERAL reloc, at the LDQ instruction, refers to the .lita
1922      section symbol.  The addend is ignored when writing, but is filled
1923      in with the file's GP value on reading, for convenience, as with the
1924      GPDISP_LO16 reloc.
1925
1926      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
1927      It should refer to the symbol to be referenced, as with 16_GOTOFF,
1928      but it generates output not based on the position within the .got
1929      section, but relative to the GP value chosen for the file during the
1930      final link stage.
1931
1932      The LITUSE reloc, on the instruction using the loaded address, gives
1933      information to the linker that it might be able to use to optimize
1934      away some literal section references.  The symbol is ignored (read
1935      as the absolute section symbol), and the "addend" indicates the type
1936      of instruction using the register:
1937               1 - "memory" fmt insn
1938               2 - byte-manipulation (byte offset reg)
1939               3 - jsr (target of branch)
1940
1941 ENUM
1942   BFD_RELOC_ALPHA_HINT
1943 ENUMDOC
1944   The HINT relocation indicates a value that should be filled into the
1945      "hint" field of a jmp/jsr/ret instruction, for possible branch-
1946      prediction logic which may be provided on some processors.
1947
1948 ENUM
1949   BFD_RELOC_ALPHA_LINKAGE
1950 ENUMDOC
1951   The LINKAGE relocation outputs a linkage pair in the object file,
1952      which is filled by the linker.
1953
1954 ENUM
1955   BFD_RELOC_ALPHA_CODEADDR
1956 ENUMDOC
1957   The CODEADDR relocation outputs a STO_CA in the object file,
1958      which is filled by the linker.
1959
1960 ENUM
1961   BFD_RELOC_ALPHA_GPREL_HI16
1962 ENUMX
1963   BFD_RELOC_ALPHA_GPREL_LO16
1964 ENUMDOC
1965   The GPREL_HI/LO relocations together form a 32-bit offset from the
1966      GP register.
1967
1968 ENUM
1969   BFD_RELOC_ALPHA_BRSGP
1970 ENUMDOC
1971   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
1972   share a common GP, and the target address is adjusted for
1973   STO_ALPHA_STD_GPLOAD.
1974
1975 ENUM
1976   BFD_RELOC_ALPHA_TLSGD
1977 ENUMX
1978   BFD_RELOC_ALPHA_TLSLDM
1979 ENUMX
1980   BFD_RELOC_ALPHA_DTPMOD64
1981 ENUMX
1982   BFD_RELOC_ALPHA_GOTDTPREL16
1983 ENUMX
1984   BFD_RELOC_ALPHA_DTPREL64
1985 ENUMX
1986   BFD_RELOC_ALPHA_DTPREL_HI16
1987 ENUMX
1988   BFD_RELOC_ALPHA_DTPREL_LO16
1989 ENUMX
1990   BFD_RELOC_ALPHA_DTPREL16
1991 ENUMX
1992   BFD_RELOC_ALPHA_GOTTPREL16
1993 ENUMX
1994   BFD_RELOC_ALPHA_TPREL64
1995 ENUMX
1996   BFD_RELOC_ALPHA_TPREL_HI16
1997 ENUMX
1998   BFD_RELOC_ALPHA_TPREL_LO16
1999 ENUMX
2000   BFD_RELOC_ALPHA_TPREL16
2001 ENUMDOC
2002   Alpha thread-local storage relocations.
2003
2004 ENUM
2005   BFD_RELOC_MIPS_JMP
2006 ENUMDOC
2007   Bits 27..2 of the relocation address shifted right 2 bits;
2008      simple reloc otherwise.
2009
2010 ENUM
2011   BFD_RELOC_MIPS16_JMP
2012 ENUMDOC
2013   The MIPS16 jump instruction.
2014
2015 ENUM
2016   BFD_RELOC_MIPS16_GPREL
2017 ENUMDOC
2018   MIPS16 GP relative reloc.
2019
2020 ENUM
2021   BFD_RELOC_HI16
2022 ENUMDOC
2023   High 16 bits of 32-bit value; simple reloc.
2024 ENUM
2025   BFD_RELOC_HI16_S
2026 ENUMDOC
2027   High 16 bits of 32-bit value but the low 16 bits will be sign
2028      extended and added to form the final result.  If the low 16
2029      bits form a negative number, we need to add one to the high value
2030      to compensate for the borrow when the low bits are added.
2031 ENUM
2032   BFD_RELOC_LO16
2033 ENUMDOC
2034   Low 16 bits.
2035
2036 ENUM
2037   BFD_RELOC_HI16_PCREL
2038 ENUMDOC
2039   High 16 bits of 32-bit pc-relative value
2040 ENUM
2041   BFD_RELOC_HI16_S_PCREL
2042 ENUMDOC
2043   High 16 bits of 32-bit pc-relative value, adjusted
2044 ENUM
2045   BFD_RELOC_LO16_PCREL
2046 ENUMDOC
2047   Low 16 bits of pc-relative value
2048
2049 ENUM
2050   BFD_RELOC_MIPS16_HI16
2051 ENUMDOC
2052   MIPS16 high 16 bits of 32-bit value.
2053 ENUM
2054   BFD_RELOC_MIPS16_HI16_S
2055 ENUMDOC
2056   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2057      extended and added to form the final result.  If the low 16
2058      bits form a negative number, we need to add one to the high value
2059      to compensate for the borrow when the low bits are added.
2060 ENUM
2061   BFD_RELOC_MIPS16_LO16
2062 ENUMDOC
2063   MIPS16 low 16 bits.
2064
2065 ENUM
2066   BFD_RELOC_MIPS_LITERAL
2067 ENUMDOC
2068   Relocation against a MIPS literal section.
2069
2070 ENUM
2071   BFD_RELOC_MIPS_GOT16
2072 ENUMX
2073   BFD_RELOC_MIPS_CALL16
2074 ENUMX
2075   BFD_RELOC_MIPS_GOT_HI16
2076 ENUMX
2077   BFD_RELOC_MIPS_GOT_LO16
2078 ENUMX
2079   BFD_RELOC_MIPS_CALL_HI16
2080 ENUMX
2081   BFD_RELOC_MIPS_CALL_LO16
2082 ENUMX
2083   BFD_RELOC_MIPS_SUB
2084 ENUMX
2085   BFD_RELOC_MIPS_GOT_PAGE
2086 ENUMX
2087   BFD_RELOC_MIPS_GOT_OFST
2088 ENUMX
2089   BFD_RELOC_MIPS_GOT_DISP
2090 ENUMX
2091   BFD_RELOC_MIPS_SHIFT5
2092 ENUMX
2093   BFD_RELOC_MIPS_SHIFT6
2094 ENUMX
2095   BFD_RELOC_MIPS_INSERT_A
2096 ENUMX
2097   BFD_RELOC_MIPS_INSERT_B
2098 ENUMX
2099   BFD_RELOC_MIPS_DELETE
2100 ENUMX
2101   BFD_RELOC_MIPS_HIGHEST
2102 ENUMX
2103   BFD_RELOC_MIPS_HIGHER
2104 ENUMX
2105   BFD_RELOC_MIPS_SCN_DISP
2106 ENUMX
2107   BFD_RELOC_MIPS_REL16
2108 ENUMX
2109   BFD_RELOC_MIPS_RELGOT
2110 ENUMX
2111   BFD_RELOC_MIPS_JALR
2112 ENUMX
2113   BFD_RELOC_MIPS_TLS_DTPMOD32
2114 ENUMX
2115   BFD_RELOC_MIPS_TLS_DTPREL32
2116 ENUMX
2117   BFD_RELOC_MIPS_TLS_DTPMOD64
2118 ENUMX
2119   BFD_RELOC_MIPS_TLS_DTPREL64
2120 ENUMX
2121   BFD_RELOC_MIPS_TLS_GD
2122 ENUMX
2123   BFD_RELOC_MIPS_TLS_LDM
2124 ENUMX
2125   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2126 ENUMX
2127   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2128 ENUMX
2129   BFD_RELOC_MIPS_TLS_GOTTPREL
2130 ENUMX
2131   BFD_RELOC_MIPS_TLS_TPREL32
2132 ENUMX
2133   BFD_RELOC_MIPS_TLS_TPREL64
2134 ENUMX
2135   BFD_RELOC_MIPS_TLS_TPREL_HI16
2136 ENUMX
2137   BFD_RELOC_MIPS_TLS_TPREL_LO16
2138 ENUMDOC
2139   MIPS ELF relocations.
2140 COMMENT
2141
2142 ENUM
2143   BFD_RELOC_MIPS_COPY
2144 ENUMX
2145   BFD_RELOC_MIPS_JUMP_SLOT
2146 ENUMDOC
2147   MIPS ELF relocations (VxWorks extensions).
2148 COMMENT
2149
2150 ENUM
2151   BFD_RELOC_FRV_LABEL16
2152 ENUMX
2153   BFD_RELOC_FRV_LABEL24
2154 ENUMX
2155   BFD_RELOC_FRV_LO16
2156 ENUMX
2157   BFD_RELOC_FRV_HI16
2158 ENUMX
2159   BFD_RELOC_FRV_GPREL12
2160 ENUMX
2161   BFD_RELOC_FRV_GPRELU12
2162 ENUMX
2163   BFD_RELOC_FRV_GPREL32
2164 ENUMX
2165   BFD_RELOC_FRV_GPRELHI
2166 ENUMX
2167   BFD_RELOC_FRV_GPRELLO
2168 ENUMX
2169   BFD_RELOC_FRV_GOT12
2170 ENUMX
2171   BFD_RELOC_FRV_GOTHI
2172 ENUMX
2173   BFD_RELOC_FRV_GOTLO
2174 ENUMX
2175   BFD_RELOC_FRV_FUNCDESC
2176 ENUMX
2177   BFD_RELOC_FRV_FUNCDESC_GOT12
2178 ENUMX
2179   BFD_RELOC_FRV_FUNCDESC_GOTHI
2180 ENUMX
2181   BFD_RELOC_FRV_FUNCDESC_GOTLO
2182 ENUMX
2183   BFD_RELOC_FRV_FUNCDESC_VALUE
2184 ENUMX
2185   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2186 ENUMX
2187   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2188 ENUMX
2189   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2190 ENUMX
2191   BFD_RELOC_FRV_GOTOFF12
2192 ENUMX
2193   BFD_RELOC_FRV_GOTOFFHI
2194 ENUMX
2195   BFD_RELOC_FRV_GOTOFFLO
2196 ENUMX
2197   BFD_RELOC_FRV_GETTLSOFF
2198 ENUMX
2199   BFD_RELOC_FRV_TLSDESC_VALUE
2200 ENUMX
2201   BFD_RELOC_FRV_GOTTLSDESC12
2202 ENUMX
2203   BFD_RELOC_FRV_GOTTLSDESCHI
2204 ENUMX
2205   BFD_RELOC_FRV_GOTTLSDESCLO
2206 ENUMX
2207   BFD_RELOC_FRV_TLSMOFF12
2208 ENUMX
2209   BFD_RELOC_FRV_TLSMOFFHI
2210 ENUMX
2211   BFD_RELOC_FRV_TLSMOFFLO
2212 ENUMX
2213   BFD_RELOC_FRV_GOTTLSOFF12
2214 ENUMX
2215   BFD_RELOC_FRV_GOTTLSOFFHI
2216 ENUMX
2217   BFD_RELOC_FRV_GOTTLSOFFLO
2218 ENUMX
2219   BFD_RELOC_FRV_TLSOFF
2220 ENUMX
2221   BFD_RELOC_FRV_TLSDESC_RELAX
2222 ENUMX
2223   BFD_RELOC_FRV_GETTLSOFF_RELAX
2224 ENUMX
2225   BFD_RELOC_FRV_TLSOFF_RELAX
2226 ENUMX
2227   BFD_RELOC_FRV_TLSMOFF
2228 ENUMDOC
2229   Fujitsu Frv Relocations.
2230 COMMENT
2231
2232 ENUM
2233   BFD_RELOC_MN10300_GOTOFF24
2234 ENUMDOC
2235   This is a 24bit GOT-relative reloc for the mn10300.
2236 ENUM
2237   BFD_RELOC_MN10300_GOT32
2238 ENUMDOC
2239   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2240   in the instruction.
2241 ENUM
2242   BFD_RELOC_MN10300_GOT24
2243 ENUMDOC
2244   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2245   in the instruction.
2246 ENUM
2247   BFD_RELOC_MN10300_GOT16
2248 ENUMDOC
2249   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2250   in the instruction.
2251 ENUM
2252   BFD_RELOC_MN10300_COPY
2253 ENUMDOC
2254   Copy symbol at runtime.
2255 ENUM
2256   BFD_RELOC_MN10300_GLOB_DAT
2257 ENUMDOC
2258   Create GOT entry.
2259 ENUM
2260   BFD_RELOC_MN10300_JMP_SLOT
2261 ENUMDOC
2262   Create PLT entry.
2263 ENUM
2264   BFD_RELOC_MN10300_RELATIVE
2265 ENUMDOC
2266   Adjust by program base.
2267 COMMENT
2268
2269 ENUM
2270   BFD_RELOC_386_GOT32
2271 ENUMX
2272   BFD_RELOC_386_PLT32
2273 ENUMX
2274   BFD_RELOC_386_COPY
2275 ENUMX
2276   BFD_RELOC_386_GLOB_DAT
2277 ENUMX
2278   BFD_RELOC_386_JUMP_SLOT
2279 ENUMX
2280   BFD_RELOC_386_RELATIVE
2281 ENUMX
2282   BFD_RELOC_386_GOTOFF
2283 ENUMX
2284   BFD_RELOC_386_GOTPC
2285 ENUMX
2286   BFD_RELOC_386_TLS_TPOFF
2287 ENUMX
2288   BFD_RELOC_386_TLS_IE
2289 ENUMX
2290   BFD_RELOC_386_TLS_GOTIE
2291 ENUMX
2292   BFD_RELOC_386_TLS_LE
2293 ENUMX
2294   BFD_RELOC_386_TLS_GD
2295 ENUMX
2296   BFD_RELOC_386_TLS_LDM
2297 ENUMX
2298   BFD_RELOC_386_TLS_LDO_32
2299 ENUMX
2300   BFD_RELOC_386_TLS_IE_32
2301 ENUMX
2302   BFD_RELOC_386_TLS_LE_32
2303 ENUMX
2304   BFD_RELOC_386_TLS_DTPMOD32
2305 ENUMX
2306   BFD_RELOC_386_TLS_DTPOFF32
2307 ENUMX
2308   BFD_RELOC_386_TLS_TPOFF32
2309 ENUMX
2310   BFD_RELOC_386_TLS_GOTDESC
2311 ENUMX
2312   BFD_RELOC_386_TLS_DESC_CALL
2313 ENUMX
2314   BFD_RELOC_386_TLS_DESC
2315 ENUMDOC
2316   i386/elf relocations
2317
2318 ENUM
2319   BFD_RELOC_X86_64_GOT32
2320 ENUMX
2321   BFD_RELOC_X86_64_PLT32
2322 ENUMX
2323   BFD_RELOC_X86_64_COPY
2324 ENUMX
2325   BFD_RELOC_X86_64_GLOB_DAT
2326 ENUMX
2327   BFD_RELOC_X86_64_JUMP_SLOT
2328 ENUMX
2329   BFD_RELOC_X86_64_RELATIVE
2330 ENUMX
2331   BFD_RELOC_X86_64_GOTPCREL
2332 ENUMX
2333   BFD_RELOC_X86_64_32S
2334 ENUMX
2335   BFD_RELOC_X86_64_DTPMOD64
2336 ENUMX
2337   BFD_RELOC_X86_64_DTPOFF64
2338 ENUMX
2339   BFD_RELOC_X86_64_TPOFF64
2340 ENUMX
2341   BFD_RELOC_X86_64_TLSGD
2342 ENUMX
2343   BFD_RELOC_X86_64_TLSLD
2344 ENUMX
2345   BFD_RELOC_X86_64_DTPOFF32
2346 ENUMX
2347   BFD_RELOC_X86_64_GOTTPOFF
2348 ENUMX
2349   BFD_RELOC_X86_64_TPOFF32
2350 ENUMX
2351   BFD_RELOC_X86_64_GOTOFF64
2352 ENUMX
2353   BFD_RELOC_X86_64_GOTPC32
2354 ENUMX
2355   BFD_RELOC_X86_64_GOT64
2356 ENUMX
2357   BFD_RELOC_X86_64_GOTPCREL64
2358 ENUMX
2359   BFD_RELOC_X86_64_GOTPC64
2360 ENUMX
2361   BFD_RELOC_X86_64_GOTPLT64
2362 ENUMX
2363   BFD_RELOC_X86_64_PLTOFF64
2364 ENUMX
2365   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2366 ENUMX
2367   BFD_RELOC_X86_64_TLSDESC_CALL
2368 ENUMX
2369   BFD_RELOC_X86_64_TLSDESC
2370 ENUMDOC
2371   x86-64/elf relocations
2372
2373 ENUM
2374   BFD_RELOC_NS32K_IMM_8
2375 ENUMX
2376   BFD_RELOC_NS32K_IMM_16
2377 ENUMX
2378   BFD_RELOC_NS32K_IMM_32
2379 ENUMX
2380   BFD_RELOC_NS32K_IMM_8_PCREL
2381 ENUMX
2382   BFD_RELOC_NS32K_IMM_16_PCREL
2383 ENUMX
2384   BFD_RELOC_NS32K_IMM_32_PCREL
2385 ENUMX
2386   BFD_RELOC_NS32K_DISP_8
2387 ENUMX
2388   BFD_RELOC_NS32K_DISP_16
2389 ENUMX
2390   BFD_RELOC_NS32K_DISP_32
2391 ENUMX
2392   BFD_RELOC_NS32K_DISP_8_PCREL
2393 ENUMX
2394   BFD_RELOC_NS32K_DISP_16_PCREL
2395 ENUMX
2396   BFD_RELOC_NS32K_DISP_32_PCREL
2397 ENUMDOC
2398   ns32k relocations
2399
2400 ENUM
2401   BFD_RELOC_PDP11_DISP_8_PCREL
2402 ENUMX
2403   BFD_RELOC_PDP11_DISP_6_PCREL
2404 ENUMDOC
2405   PDP11 relocations
2406
2407 ENUM
2408   BFD_RELOC_PJ_CODE_HI16
2409 ENUMX
2410   BFD_RELOC_PJ_CODE_LO16
2411 ENUMX
2412   BFD_RELOC_PJ_CODE_DIR16
2413 ENUMX
2414   BFD_RELOC_PJ_CODE_DIR32
2415 ENUMX
2416   BFD_RELOC_PJ_CODE_REL16
2417 ENUMX
2418   BFD_RELOC_PJ_CODE_REL32
2419 ENUMDOC
2420   Picojava relocs.  Not all of these appear in object files.
2421
2422 ENUM
2423   BFD_RELOC_PPC_B26
2424 ENUMX
2425   BFD_RELOC_PPC_BA26
2426 ENUMX
2427   BFD_RELOC_PPC_TOC16
2428 ENUMX
2429   BFD_RELOC_PPC_B16
2430 ENUMX
2431   BFD_RELOC_PPC_B16_BRTAKEN
2432 ENUMX
2433   BFD_RELOC_PPC_B16_BRNTAKEN
2434 ENUMX
2435   BFD_RELOC_PPC_BA16
2436 ENUMX
2437   BFD_RELOC_PPC_BA16_BRTAKEN
2438 ENUMX
2439   BFD_RELOC_PPC_BA16_BRNTAKEN
2440 ENUMX
2441   BFD_RELOC_PPC_COPY
2442 ENUMX
2443   BFD_RELOC_PPC_GLOB_DAT
2444 ENUMX
2445   BFD_RELOC_PPC_JMP_SLOT
2446 ENUMX
2447   BFD_RELOC_PPC_RELATIVE
2448 ENUMX
2449   BFD_RELOC_PPC_LOCAL24PC
2450 ENUMX
2451   BFD_RELOC_PPC_EMB_NADDR32
2452 ENUMX
2453   BFD_RELOC_PPC_EMB_NADDR16
2454 ENUMX
2455   BFD_RELOC_PPC_EMB_NADDR16_LO
2456 ENUMX
2457   BFD_RELOC_PPC_EMB_NADDR16_HI
2458 ENUMX
2459   BFD_RELOC_PPC_EMB_NADDR16_HA
2460 ENUMX
2461   BFD_RELOC_PPC_EMB_SDAI16
2462 ENUMX
2463   BFD_RELOC_PPC_EMB_SDA2I16
2464 ENUMX
2465   BFD_RELOC_PPC_EMB_SDA2REL
2466 ENUMX
2467   BFD_RELOC_PPC_EMB_SDA21
2468 ENUMX
2469   BFD_RELOC_PPC_EMB_MRKREF
2470 ENUMX
2471   BFD_RELOC_PPC_EMB_RELSEC16
2472 ENUMX
2473   BFD_RELOC_PPC_EMB_RELST_LO
2474 ENUMX
2475   BFD_RELOC_PPC_EMB_RELST_HI
2476 ENUMX
2477   BFD_RELOC_PPC_EMB_RELST_HA
2478 ENUMX
2479   BFD_RELOC_PPC_EMB_BIT_FLD
2480 ENUMX
2481   BFD_RELOC_PPC_EMB_RELSDA
2482 ENUMX
2483   BFD_RELOC_PPC64_HIGHER
2484 ENUMX
2485   BFD_RELOC_PPC64_HIGHER_S
2486 ENUMX
2487   BFD_RELOC_PPC64_HIGHEST
2488 ENUMX
2489   BFD_RELOC_PPC64_HIGHEST_S
2490 ENUMX
2491   BFD_RELOC_PPC64_TOC16_LO
2492 ENUMX
2493   BFD_RELOC_PPC64_TOC16_HI
2494 ENUMX
2495   BFD_RELOC_PPC64_TOC16_HA
2496 ENUMX
2497   BFD_RELOC_PPC64_TOC
2498 ENUMX
2499   BFD_RELOC_PPC64_PLTGOT16
2500 ENUMX
2501   BFD_RELOC_PPC64_PLTGOT16_LO
2502 ENUMX
2503   BFD_RELOC_PPC64_PLTGOT16_HI
2504 ENUMX
2505   BFD_RELOC_PPC64_PLTGOT16_HA
2506 ENUMX
2507   BFD_RELOC_PPC64_ADDR16_DS
2508 ENUMX
2509   BFD_RELOC_PPC64_ADDR16_LO_DS
2510 ENUMX
2511   BFD_RELOC_PPC64_GOT16_DS
2512 ENUMX
2513   BFD_RELOC_PPC64_GOT16_LO_DS
2514 ENUMX
2515   BFD_RELOC_PPC64_PLT16_LO_DS
2516 ENUMX
2517   BFD_RELOC_PPC64_SECTOFF_DS
2518 ENUMX
2519   BFD_RELOC_PPC64_SECTOFF_LO_DS
2520 ENUMX
2521   BFD_RELOC_PPC64_TOC16_DS
2522 ENUMX
2523   BFD_RELOC_PPC64_TOC16_LO_DS
2524 ENUMX
2525   BFD_RELOC_PPC64_PLTGOT16_DS
2526 ENUMX
2527   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2528 ENUMDOC
2529   Power(rs6000) and PowerPC relocations.
2530
2531 ENUM
2532   BFD_RELOC_PPC_TLS
2533 ENUMX
2534   BFD_RELOC_PPC_DTPMOD
2535 ENUMX
2536   BFD_RELOC_PPC_TPREL16
2537 ENUMX
2538   BFD_RELOC_PPC_TPREL16_LO
2539 ENUMX
2540   BFD_RELOC_PPC_TPREL16_HI
2541 ENUMX
2542   BFD_RELOC_PPC_TPREL16_HA
2543 ENUMX
2544   BFD_RELOC_PPC_TPREL
2545 ENUMX
2546   BFD_RELOC_PPC_DTPREL16
2547 ENUMX
2548   BFD_RELOC_PPC_DTPREL16_LO
2549 ENUMX
2550   BFD_RELOC_PPC_DTPREL16_HI
2551 ENUMX
2552   BFD_RELOC_PPC_DTPREL16_HA
2553 ENUMX
2554   BFD_RELOC_PPC_DTPREL
2555 ENUMX
2556   BFD_RELOC_PPC_GOT_TLSGD16
2557 ENUMX
2558   BFD_RELOC_PPC_GOT_TLSGD16_LO
2559 ENUMX
2560   BFD_RELOC_PPC_GOT_TLSGD16_HI
2561 ENUMX
2562   BFD_RELOC_PPC_GOT_TLSGD16_HA
2563 ENUMX
2564   BFD_RELOC_PPC_GOT_TLSLD16
2565 ENUMX
2566   BFD_RELOC_PPC_GOT_TLSLD16_LO
2567 ENUMX
2568   BFD_RELOC_PPC_GOT_TLSLD16_HI
2569 ENUMX
2570   BFD_RELOC_PPC_GOT_TLSLD16_HA
2571 ENUMX
2572   BFD_RELOC_PPC_GOT_TPREL16
2573 ENUMX
2574   BFD_RELOC_PPC_GOT_TPREL16_LO
2575 ENUMX
2576   BFD_RELOC_PPC_GOT_TPREL16_HI
2577 ENUMX
2578   BFD_RELOC_PPC_GOT_TPREL16_HA
2579 ENUMX
2580   BFD_RELOC_PPC_GOT_DTPREL16
2581 ENUMX
2582   BFD_RELOC_PPC_GOT_DTPREL16_LO
2583 ENUMX
2584   BFD_RELOC_PPC_GOT_DTPREL16_HI
2585 ENUMX
2586   BFD_RELOC_PPC_GOT_DTPREL16_HA
2587 ENUMX
2588   BFD_RELOC_PPC64_TPREL16_DS
2589 ENUMX
2590   BFD_RELOC_PPC64_TPREL16_LO_DS
2591 ENUMX
2592   BFD_RELOC_PPC64_TPREL16_HIGHER
2593 ENUMX
2594   BFD_RELOC_PPC64_TPREL16_HIGHERA
2595 ENUMX
2596   BFD_RELOC_PPC64_TPREL16_HIGHEST
2597 ENUMX
2598   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2599 ENUMX
2600   BFD_RELOC_PPC64_DTPREL16_DS
2601 ENUMX
2602   BFD_RELOC_PPC64_DTPREL16_LO_DS
2603 ENUMX
2604   BFD_RELOC_PPC64_DTPREL16_HIGHER
2605 ENUMX
2606   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2607 ENUMX
2608   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2609 ENUMX
2610   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2611 ENUMDOC
2612   PowerPC and PowerPC64 thread-local storage relocations.
2613
2614 ENUM
2615   BFD_RELOC_I370_D12
2616 ENUMDOC
2617   IBM 370/390 relocations
2618
2619 ENUM
2620   BFD_RELOC_CTOR
2621 ENUMDOC
2622   The type of reloc used to build a constructor table - at the moment
2623   probably a 32 bit wide absolute relocation, but the target can choose.
2624   It generally does map to one of the other relocation types.
2625
2626 ENUM
2627   BFD_RELOC_ARM_PCREL_BRANCH
2628 ENUMDOC
2629   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
2630   not stored in the instruction.
2631 ENUM
2632   BFD_RELOC_ARM_PCREL_BLX
2633 ENUMDOC
2634   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
2635   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2636   field in the instruction.
2637 ENUM
2638   BFD_RELOC_THUMB_PCREL_BLX
2639 ENUMDOC
2640   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
2641   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2642   field in the instruction.
2643 ENUM
2644   BFD_RELOC_ARM_PCREL_CALL
2645 ENUMDOC
2646   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
2647 ENUM
2648   BFD_RELOC_ARM_PCREL_JUMP
2649 ENUMDOC
2650   ARM 26-bit pc-relative branch for B or conditional BL instruction.
2651
2652 ENUM
2653   BFD_RELOC_THUMB_PCREL_BRANCH7
2654 ENUMX
2655   BFD_RELOC_THUMB_PCREL_BRANCH9
2656 ENUMX
2657   BFD_RELOC_THUMB_PCREL_BRANCH12
2658 ENUMX
2659   BFD_RELOC_THUMB_PCREL_BRANCH20
2660 ENUMX
2661   BFD_RELOC_THUMB_PCREL_BRANCH23
2662 ENUMX
2663   BFD_RELOC_THUMB_PCREL_BRANCH25
2664 ENUMDOC
2665   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
2666   The lowest bit must be zero and is not stored in the instruction.
2667   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
2668   "nn" one smaller in all cases.  Note further that BRANCH23
2669   corresponds to R_ARM_THM_CALL.
2670
2671 ENUM
2672   BFD_RELOC_ARM_OFFSET_IMM
2673 ENUMDOC
2674   12-bit immediate offset, used in ARM-format ldr and str instructions.
2675
2676 ENUM
2677   BFD_RELOC_ARM_THUMB_OFFSET
2678 ENUMDOC
2679   5-bit immediate offset, used in Thumb-format ldr and str instructions.
2680
2681 ENUM
2682   BFD_RELOC_ARM_TARGET1
2683 ENUMDOC
2684   Pc-relative or absolute relocation depending on target.  Used for
2685   entries in .init_array sections.
2686 ENUM
2687   BFD_RELOC_ARM_ROSEGREL32
2688 ENUMDOC
2689   Read-only segment base relative address.
2690 ENUM
2691   BFD_RELOC_ARM_SBREL32
2692 ENUMDOC
2693   Data segment base relative address.
2694 ENUM
2695   BFD_RELOC_ARM_TARGET2
2696 ENUMDOC
2697   This reloc is used for references to RTTI data from exception handling
2698   tables.  The actual definition depends on the target.  It may be a
2699   pc-relative or some form of GOT-indirect relocation.
2700 ENUM
2701   BFD_RELOC_ARM_PREL31
2702 ENUMDOC
2703   31-bit PC relative address.
2704
2705 ENUM
2706   BFD_RELOC_ARM_JUMP_SLOT
2707 ENUMX
2708   BFD_RELOC_ARM_GLOB_DAT
2709 ENUMX
2710   BFD_RELOC_ARM_GOT32
2711 ENUMX
2712   BFD_RELOC_ARM_PLT32
2713 ENUMX
2714   BFD_RELOC_ARM_RELATIVE
2715 ENUMX
2716   BFD_RELOC_ARM_GOTOFF
2717 ENUMX
2718   BFD_RELOC_ARM_GOTPC
2719 ENUMDOC
2720   Relocations for setting up GOTs and PLTs for shared libraries.
2721
2722 ENUM
2723   BFD_RELOC_ARM_TLS_GD32
2724 ENUMX
2725   BFD_RELOC_ARM_TLS_LDO32
2726 ENUMX
2727   BFD_RELOC_ARM_TLS_LDM32
2728 ENUMX
2729   BFD_RELOC_ARM_TLS_DTPOFF32
2730 ENUMX
2731   BFD_RELOC_ARM_TLS_DTPMOD32
2732 ENUMX
2733   BFD_RELOC_ARM_TLS_TPOFF32
2734 ENUMX
2735   BFD_RELOC_ARM_TLS_IE32
2736 ENUMX
2737   BFD_RELOC_ARM_TLS_LE32
2738 ENUMDOC
2739   ARM thread-local storage relocations.
2740
2741 ENUM
2742   BFD_RELOC_ARM_IMMEDIATE
2743 ENUMX
2744   BFD_RELOC_ARM_ADRL_IMMEDIATE
2745 ENUMX
2746   BFD_RELOC_ARM_T32_IMMEDIATE
2747 ENUMX
2748   BFD_RELOC_ARM_T32_IMM12
2749 ENUMX
2750   BFD_RELOC_ARM_T32_ADD_PC12
2751 ENUMX
2752   BFD_RELOC_ARM_SHIFT_IMM
2753 ENUMX
2754   BFD_RELOC_ARM_SMC
2755 ENUMX
2756   BFD_RELOC_ARM_SWI
2757 ENUMX
2758   BFD_RELOC_ARM_MULTI
2759 ENUMX
2760   BFD_RELOC_ARM_CP_OFF_IMM
2761 ENUMX
2762   BFD_RELOC_ARM_CP_OFF_IMM_S2
2763 ENUMX
2764   BFD_RELOC_ARM_T32_CP_OFF_IMM
2765 ENUMX
2766   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
2767 ENUMX
2768   BFD_RELOC_ARM_ADR_IMM
2769 ENUMX
2770   BFD_RELOC_ARM_LDR_IMM
2771 ENUMX
2772   BFD_RELOC_ARM_LITERAL
2773 ENUMX
2774   BFD_RELOC_ARM_IN_POOL
2775 ENUMX
2776   BFD_RELOC_ARM_OFFSET_IMM8
2777 ENUMX
2778   BFD_RELOC_ARM_T32_OFFSET_U8
2779 ENUMX
2780   BFD_RELOC_ARM_T32_OFFSET_IMM
2781 ENUMX
2782   BFD_RELOC_ARM_HWLITERAL
2783 ENUMX
2784   BFD_RELOC_ARM_THUMB_ADD
2785 ENUMX
2786   BFD_RELOC_ARM_THUMB_IMM
2787 ENUMX
2788   BFD_RELOC_ARM_THUMB_SHIFT
2789 ENUMDOC
2790   These relocs are only used within the ARM assembler.  They are not
2791   (at present) written to any object files.
2792
2793 ENUM
2794   BFD_RELOC_SH_PCDISP8BY2
2795 ENUMX
2796   BFD_RELOC_SH_PCDISP12BY2
2797 ENUMX
2798   BFD_RELOC_SH_IMM3
2799 ENUMX
2800   BFD_RELOC_SH_IMM3U
2801 ENUMX
2802   BFD_RELOC_SH_DISP12
2803 ENUMX
2804   BFD_RELOC_SH_DISP12BY2
2805 ENUMX
2806   BFD_RELOC_SH_DISP12BY4
2807 ENUMX
2808   BFD_RELOC_SH_DISP12BY8
2809 ENUMX
2810   BFD_RELOC_SH_DISP20
2811 ENUMX
2812   BFD_RELOC_SH_DISP20BY8
2813 ENUMX
2814   BFD_RELOC_SH_IMM4
2815 ENUMX
2816   BFD_RELOC_SH_IMM4BY2
2817 ENUMX
2818   BFD_RELOC_SH_IMM4BY4
2819 ENUMX
2820   BFD_RELOC_SH_IMM8
2821 ENUMX
2822   BFD_RELOC_SH_IMM8BY2
2823 ENUMX
2824   BFD_RELOC_SH_IMM8BY4
2825 ENUMX
2826   BFD_RELOC_SH_PCRELIMM8BY2
2827 ENUMX
2828   BFD_RELOC_SH_PCRELIMM8BY4
2829 ENUMX
2830   BFD_RELOC_SH_SWITCH16
2831 ENUMX
2832   BFD_RELOC_SH_SWITCH32
2833 ENUMX
2834   BFD_RELOC_SH_USES
2835 ENUMX
2836   BFD_RELOC_SH_COUNT
2837 ENUMX
2838   BFD_RELOC_SH_ALIGN
2839 ENUMX
2840   BFD_RELOC_SH_CODE
2841 ENUMX
2842   BFD_RELOC_SH_DATA
2843 ENUMX
2844   BFD_RELOC_SH_LABEL
2845 ENUMX
2846   BFD_RELOC_SH_LOOP_START
2847 ENUMX
2848   BFD_RELOC_SH_LOOP_END
2849 ENUMX
2850   BFD_RELOC_SH_COPY
2851 ENUMX
2852   BFD_RELOC_SH_GLOB_DAT
2853 ENUMX
2854   BFD_RELOC_SH_JMP_SLOT
2855 ENUMX
2856   BFD_RELOC_SH_RELATIVE
2857 ENUMX
2858   BFD_RELOC_SH_GOTPC
2859 ENUMX
2860   BFD_RELOC_SH_GOT_LOW16
2861 ENUMX
2862   BFD_RELOC_SH_GOT_MEDLOW16
2863 ENUMX
2864   BFD_RELOC_SH_GOT_MEDHI16
2865 ENUMX
2866   BFD_RELOC_SH_GOT_HI16
2867 ENUMX
2868   BFD_RELOC_SH_GOTPLT_LOW16
2869 ENUMX
2870   BFD_RELOC_SH_GOTPLT_MEDLOW16
2871 ENUMX
2872   BFD_RELOC_SH_GOTPLT_MEDHI16
2873 ENUMX
2874   BFD_RELOC_SH_GOTPLT_HI16
2875 ENUMX
2876   BFD_RELOC_SH_PLT_LOW16
2877 ENUMX
2878   BFD_RELOC_SH_PLT_MEDLOW16
2879 ENUMX
2880   BFD_RELOC_SH_PLT_MEDHI16
2881 ENUMX
2882   BFD_RELOC_SH_PLT_HI16
2883 ENUMX
2884   BFD_RELOC_SH_GOTOFF_LOW16
2885 ENUMX
2886   BFD_RELOC_SH_GOTOFF_MEDLOW16
2887 ENUMX
2888   BFD_RELOC_SH_GOTOFF_MEDHI16
2889 ENUMX
2890   BFD_RELOC_SH_GOTOFF_HI16
2891 ENUMX
2892   BFD_RELOC_SH_GOTPC_LOW16
2893 ENUMX
2894   BFD_RELOC_SH_GOTPC_MEDLOW16
2895 ENUMX
2896   BFD_RELOC_SH_GOTPC_MEDHI16
2897 ENUMX
2898   BFD_RELOC_SH_GOTPC_HI16
2899 ENUMX
2900   BFD_RELOC_SH_COPY64
2901 ENUMX
2902   BFD_RELOC_SH_GLOB_DAT64
2903 ENUMX
2904   BFD_RELOC_SH_JMP_SLOT64
2905 ENUMX
2906   BFD_RELOC_SH_RELATIVE64
2907 ENUMX
2908   BFD_RELOC_SH_GOT10BY4
2909 ENUMX
2910   BFD_RELOC_SH_GOT10BY8
2911 ENUMX
2912   BFD_RELOC_SH_GOTPLT10BY4
2913 ENUMX
2914   BFD_RELOC_SH_GOTPLT10BY8
2915 ENUMX
2916   BFD_RELOC_SH_GOTPLT32
2917 ENUMX
2918   BFD_RELOC_SH_SHMEDIA_CODE
2919 ENUMX
2920   BFD_RELOC_SH_IMMU5
2921 ENUMX
2922   BFD_RELOC_SH_IMMS6
2923 ENUMX
2924   BFD_RELOC_SH_IMMS6BY32
2925 ENUMX
2926   BFD_RELOC_SH_IMMU6
2927 ENUMX
2928   BFD_RELOC_SH_IMMS10
2929 ENUMX
2930   BFD_RELOC_SH_IMMS10BY2
2931 ENUMX
2932   BFD_RELOC_SH_IMMS10BY4
2933 ENUMX
2934   BFD_RELOC_SH_IMMS10BY8
2935 ENUMX
2936   BFD_RELOC_SH_IMMS16
2937 ENUMX
2938   BFD_RELOC_SH_IMMU16
2939 ENUMX
2940   BFD_RELOC_SH_IMM_LOW16
2941 ENUMX
2942   BFD_RELOC_SH_IMM_LOW16_PCREL
2943 ENUMX
2944   BFD_RELOC_SH_IMM_MEDLOW16
2945 ENUMX
2946   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
2947 ENUMX
2948   BFD_RELOC_SH_IMM_MEDHI16
2949 ENUMX
2950   BFD_RELOC_SH_IMM_MEDHI16_PCREL
2951 ENUMX
2952   BFD_RELOC_SH_IMM_HI16
2953 ENUMX
2954   BFD_RELOC_SH_IMM_HI16_PCREL
2955 ENUMX
2956   BFD_RELOC_SH_PT_16
2957 ENUMX
2958   BFD_RELOC_SH_TLS_GD_32
2959 ENUMX
2960   BFD_RELOC_SH_TLS_LD_32
2961 ENUMX
2962   BFD_RELOC_SH_TLS_LDO_32
2963 ENUMX
2964   BFD_RELOC_SH_TLS_IE_32
2965 ENUMX
2966   BFD_RELOC_SH_TLS_LE_32
2967 ENUMX
2968   BFD_RELOC_SH_TLS_DTPMOD32
2969 ENUMX
2970   BFD_RELOC_SH_TLS_DTPOFF32
2971 ENUMX
2972   BFD_RELOC_SH_TLS_TPOFF32
2973 ENUMDOC
2974   Renesas / SuperH SH relocs.  Not all of these appear in object files.
2975
2976 ENUM
2977   BFD_RELOC_ARC_B22_PCREL
2978 ENUMDOC
2979   ARC Cores relocs.
2980   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
2981   not stored in the instruction.  The high 20 bits are installed in bits 26
2982   through 7 of the instruction.
2983 ENUM
2984   BFD_RELOC_ARC_B26
2985 ENUMDOC
2986   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
2987   stored in the instruction.  The high 24 bits are installed in bits 23
2988   through 0.
2989
2990 ENUM
2991   BFD_RELOC_BFIN_16_IMM
2992 ENUMDOC
2993   ADI Blackfin 16 bit immediate absolute reloc.
2994 ENUM
2995   BFD_RELOC_BFIN_16_HIGH
2996 ENUMDOC
2997   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
2998 ENUM
2999   BFD_RELOC_BFIN_4_PCREL
3000 ENUMDOC
3001   ADI Blackfin 'a' part of LSETUP.
3002 ENUM
3003   BFD_RELOC_BFIN_5_PCREL
3004 ENUMDOC
3005   ADI Blackfin.
3006 ENUM
3007   BFD_RELOC_BFIN_16_LOW
3008 ENUMDOC
3009   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3010 ENUM
3011   BFD_RELOC_BFIN_10_PCREL
3012 ENUMDOC
3013   ADI Blackfin.
3014 ENUM
3015   BFD_RELOC_BFIN_11_PCREL
3016 ENUMDOC
3017   ADI Blackfin 'b' part of LSETUP.
3018 ENUM
3019   BFD_RELOC_BFIN_12_PCREL_JUMP
3020 ENUMDOC
3021   ADI Blackfin.
3022 ENUM
3023   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3024 ENUMDOC
3025   ADI Blackfin Short jump, pcrel.
3026 ENUM
3027   BFD_RELOC_BFIN_24_PCREL_CALL_X
3028 ENUMDOC
3029   ADI Blackfin Call.x not implemented.
3030 ENUM
3031   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3032 ENUMDOC
3033   ADI Blackfin Long Jump pcrel.
3034 ENUM
3035   BFD_RELOC_BFIN_GOT17M4
3036 ENUMX
3037   BFD_RELOC_BFIN_GOTHI
3038 ENUMX
3039   BFD_RELOC_BFIN_GOTLO
3040 ENUMX
3041   BFD_RELOC_BFIN_FUNCDESC
3042 ENUMX
3043   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3044 ENUMX
3045   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3046 ENUMX
3047   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3048 ENUMX
3049   BFD_RELOC_BFIN_FUNCDESC_VALUE
3050 ENUMX
3051   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3052 ENUMX
3053   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3054 ENUMX
3055   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3056 ENUMX
3057   BFD_RELOC_BFIN_GOTOFF17M4
3058 ENUMX
3059   BFD_RELOC_BFIN_GOTOFFHI
3060 ENUMX
3061   BFD_RELOC_BFIN_GOTOFFLO
3062 ENUMDOC
3063   ADI Blackfin FD-PIC relocations.
3064 ENUM
3065   BFD_RELOC_BFIN_GOT
3066 ENUMDOC
3067   ADI Blackfin GOT relocation.
3068 ENUM
3069   BFD_RELOC_BFIN_PLTPC
3070 ENUMDOC
3071   ADI Blackfin PLTPC relocation.
3072 ENUM
3073   BFD_ARELOC_BFIN_PUSH
3074 ENUMDOC
3075   ADI Blackfin arithmetic relocation.
3076 ENUM
3077   BFD_ARELOC_BFIN_CONST
3078 ENUMDOC
3079   ADI Blackfin arithmetic relocation.
3080 ENUM
3081   BFD_ARELOC_BFIN_ADD
3082 ENUMDOC
3083   ADI Blackfin arithmetic relocation.
3084 ENUM
3085   BFD_ARELOC_BFIN_SUB
3086 ENUMDOC
3087   ADI Blackfin arithmetic relocation.
3088 ENUM
3089   BFD_ARELOC_BFIN_MULT
3090 ENUMDOC
3091   ADI Blackfin arithmetic relocation.
3092 ENUM
3093   BFD_ARELOC_BFIN_DIV
3094 ENUMDOC
3095   ADI Blackfin arithmetic relocation.
3096 ENUM
3097   BFD_ARELOC_BFIN_MOD
3098 ENUMDOC
3099   ADI Blackfin arithmetic relocation.
3100 ENUM
3101   BFD_ARELOC_BFIN_LSHIFT
3102 ENUMDOC
3103   ADI Blackfin arithmetic relocation.
3104 ENUM
3105   BFD_ARELOC_BFIN_RSHIFT
3106 ENUMDOC
3107   ADI Blackfin arithmetic relocation.
3108 ENUM
3109   BFD_ARELOC_BFIN_AND
3110 ENUMDOC
3111   ADI Blackfin arithmetic relocation.
3112 ENUM
3113   BFD_ARELOC_BFIN_OR
3114 ENUMDOC
3115   ADI Blackfin arithmetic relocation.
3116 ENUM
3117   BFD_ARELOC_BFIN_XOR
3118 ENUMDOC
3119   ADI Blackfin arithmetic relocation.
3120 ENUM
3121   BFD_ARELOC_BFIN_LAND
3122 ENUMDOC
3123   ADI Blackfin arithmetic relocation.
3124 ENUM
3125   BFD_ARELOC_BFIN_LOR
3126 ENUMDOC
3127   ADI Blackfin arithmetic relocation.
3128 ENUM
3129   BFD_ARELOC_BFIN_LEN
3130 ENUMDOC
3131   ADI Blackfin arithmetic relocation.
3132 ENUM
3133   BFD_ARELOC_BFIN_NEG
3134 ENUMDOC
3135   ADI Blackfin arithmetic relocation.
3136 ENUM
3137   BFD_ARELOC_BFIN_COMP
3138 ENUMDOC
3139   ADI Blackfin arithmetic relocation.
3140 ENUM
3141   BFD_ARELOC_BFIN_PAGE
3142 ENUMDOC
3143   ADI Blackfin arithmetic relocation.
3144 ENUM
3145   BFD_ARELOC_BFIN_HWPAGE
3146 ENUMDOC
3147   ADI Blackfin arithmetic relocation.
3148 ENUM
3149   BFD_ARELOC_BFIN_ADDR
3150 ENUMDOC
3151   ADI Blackfin arithmetic relocation.
3152
3153 ENUM
3154   BFD_RELOC_D10V_10_PCREL_R
3155 ENUMDOC
3156   Mitsubishi D10V relocs.
3157   This is a 10-bit reloc with the right 2 bits
3158   assumed to be 0.
3159 ENUM
3160   BFD_RELOC_D10V_10_PCREL_L
3161 ENUMDOC
3162   Mitsubishi D10V relocs.
3163   This is a 10-bit reloc with the right 2 bits
3164   assumed to be 0.  This is the same as the previous reloc
3165   except it is in the left container, i.e.,
3166   shifted left 15 bits.
3167 ENUM
3168   BFD_RELOC_D10V_18
3169 ENUMDOC
3170   This is an 18-bit reloc with the right 2 bits
3171   assumed to be 0.
3172 ENUM
3173   BFD_RELOC_D10V_18_PCREL
3174 ENUMDOC
3175   This is an 18-bit reloc with the right 2 bits
3176   assumed to be 0.
3177
3178 ENUM
3179   BFD_RELOC_D30V_6
3180 ENUMDOC
3181   Mitsubishi D30V relocs.
3182   This is a 6-bit absolute reloc.
3183 ENUM
3184   BFD_RELOC_D30V_9_PCREL
3185 ENUMDOC
3186   This is a 6-bit pc-relative reloc with
3187   the right 3 bits assumed to be 0.
3188 ENUM
3189   BFD_RELOC_D30V_9_PCREL_R
3190 ENUMDOC
3191   This is a 6-bit pc-relative reloc with
3192   the right 3 bits assumed to be 0. Same
3193   as the previous reloc but on the right side
3194   of the container.
3195 ENUM
3196   BFD_RELOC_D30V_15
3197 ENUMDOC
3198   This is a 12-bit absolute reloc with the
3199   right 3 bitsassumed to be 0.
3200 ENUM
3201   BFD_RELOC_D30V_15_PCREL
3202 ENUMDOC
3203   This is a 12-bit pc-relative reloc with
3204   the right 3 bits assumed to be 0.
3205 ENUM
3206   BFD_RELOC_D30V_15_PCREL_R
3207 ENUMDOC
3208   This is a 12-bit pc-relative reloc with
3209   the right 3 bits assumed to be 0. Same
3210   as the previous reloc but on the right side
3211   of the container.
3212 ENUM
3213   BFD_RELOC_D30V_21
3214 ENUMDOC
3215   This is an 18-bit absolute reloc with
3216   the right 3 bits assumed to be 0.
3217 ENUM
3218   BFD_RELOC_D30V_21_PCREL
3219 ENUMDOC
3220   This is an 18-bit pc-relative reloc with
3221   the right 3 bits assumed to be 0.
3222 ENUM
3223   BFD_RELOC_D30V_21_PCREL_R
3224 ENUMDOC
3225   This is an 18-bit pc-relative reloc with
3226   the right 3 bits assumed to be 0. Same
3227   as the previous reloc but on the right side
3228   of the container.
3229 ENUM
3230   BFD_RELOC_D30V_32
3231 ENUMDOC
3232   This is a 32-bit absolute reloc.
3233 ENUM
3234   BFD_RELOC_D30V_32_PCREL
3235 ENUMDOC
3236   This is a 32-bit pc-relative reloc.
3237
3238 ENUM
3239   BFD_RELOC_DLX_HI16_S
3240 ENUMDOC
3241   DLX relocs
3242 ENUM
3243   BFD_RELOC_DLX_LO16
3244 ENUMDOC
3245   DLX relocs
3246 ENUM
3247   BFD_RELOC_DLX_JMP26
3248 ENUMDOC
3249   DLX relocs
3250
3251 ENUM
3252   BFD_RELOC_M32C_HI8
3253 ENUMX
3254   BFD_RELOC_M32C_RL_JUMP
3255 ENUMX
3256   BFD_RELOC_M32C_RL_1ADDR
3257 ENUMX
3258   BFD_RELOC_M32C_RL_2ADDR
3259 ENUMDOC
3260   Renesas M16C/M32C Relocations.
3261
3262 ENUM
3263   BFD_RELOC_M32R_24
3264 ENUMDOC
3265   Renesas M32R (formerly Mitsubishi M32R) relocs.
3266   This is a 24 bit absolute address.
3267 ENUM
3268   BFD_RELOC_M32R_10_PCREL
3269 ENUMDOC
3270   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3271 ENUM
3272   BFD_RELOC_M32R_18_PCREL
3273 ENUMDOC
3274   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3275 ENUM
3276   BFD_RELOC_M32R_26_PCREL
3277 ENUMDOC
3278   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3279 ENUM
3280   BFD_RELOC_M32R_HI16_ULO
3281 ENUMDOC
3282   This is a 16-bit reloc containing the high 16 bits of an address
3283   used when the lower 16 bits are treated as unsigned.
3284 ENUM
3285   BFD_RELOC_M32R_HI16_SLO
3286 ENUMDOC
3287   This is a 16-bit reloc containing the high 16 bits of an address
3288   used when the lower 16 bits are treated as signed.
3289 ENUM
3290   BFD_RELOC_M32R_LO16
3291 ENUMDOC
3292   This is a 16-bit reloc containing the lower 16 bits of an address.
3293 ENUM
3294   BFD_RELOC_M32R_SDA16
3295 ENUMDOC
3296   This is a 16-bit reloc containing the small data area offset for use in
3297   add3, load, and store instructions.
3298 ENUM
3299   BFD_RELOC_M32R_GOT24
3300 ENUMX
3301   BFD_RELOC_M32R_26_PLTREL
3302 ENUMX
3303   BFD_RELOC_M32R_COPY
3304 ENUMX
3305   BFD_RELOC_M32R_GLOB_DAT
3306 ENUMX
3307   BFD_RELOC_M32R_JMP_SLOT
3308 ENUMX
3309   BFD_RELOC_M32R_RELATIVE
3310 ENUMX
3311   BFD_RELOC_M32R_GOTOFF
3312 ENUMX
3313   BFD_RELOC_M32R_GOTOFF_HI_ULO
3314 ENUMX
3315   BFD_RELOC_M32R_GOTOFF_HI_SLO
3316 ENUMX
3317   BFD_RELOC_M32R_GOTOFF_LO
3318 ENUMX
3319   BFD_RELOC_M32R_GOTPC24
3320 ENUMX
3321   BFD_RELOC_M32R_GOT16_HI_ULO
3322 ENUMX
3323   BFD_RELOC_M32R_GOT16_HI_SLO
3324 ENUMX
3325   BFD_RELOC_M32R_GOT16_LO
3326 ENUMX
3327   BFD_RELOC_M32R_GOTPC_HI_ULO
3328 ENUMX
3329   BFD_RELOC_M32R_GOTPC_HI_SLO
3330 ENUMX
3331   BFD_RELOC_M32R_GOTPC_LO
3332 ENUMDOC
3333   For PIC.
3334
3335
3336 ENUM
3337   BFD_RELOC_V850_9_PCREL
3338 ENUMDOC
3339   This is a 9-bit reloc
3340 ENUM
3341   BFD_RELOC_V850_22_PCREL
3342 ENUMDOC
3343   This is a 22-bit reloc
3344
3345 ENUM
3346   BFD_RELOC_V850_SDA_16_16_OFFSET
3347 ENUMDOC
3348   This is a 16 bit offset from the short data area pointer.
3349 ENUM
3350   BFD_RELOC_V850_SDA_15_16_OFFSET
3351 ENUMDOC
3352   This is a 16 bit offset (of which only 15 bits are used) from the
3353   short data area pointer.
3354 ENUM
3355   BFD_RELOC_V850_ZDA_16_16_OFFSET
3356 ENUMDOC
3357   This is a 16 bit offset from the zero data area pointer.
3358 ENUM
3359   BFD_RELOC_V850_ZDA_15_16_OFFSET
3360 ENUMDOC
3361   This is a 16 bit offset (of which only 15 bits are used) from the
3362   zero data area pointer.
3363 ENUM
3364   BFD_RELOC_V850_TDA_6_8_OFFSET
3365 ENUMDOC
3366   This is an 8 bit offset (of which only 6 bits are used) from the
3367   tiny data area pointer.
3368 ENUM
3369   BFD_RELOC_V850_TDA_7_8_OFFSET
3370 ENUMDOC
3371   This is an 8bit offset (of which only 7 bits are used) from the tiny
3372   data area pointer.
3373 ENUM
3374   BFD_RELOC_V850_TDA_7_7_OFFSET
3375 ENUMDOC
3376   This is a 7 bit offset from the tiny data area pointer.
3377 ENUM
3378   BFD_RELOC_V850_TDA_16_16_OFFSET
3379 ENUMDOC
3380   This is a 16 bit offset from the tiny data area pointer.
3381 COMMENT
3382 ENUM
3383   BFD_RELOC_V850_TDA_4_5_OFFSET
3384 ENUMDOC
3385   This is a 5 bit offset (of which only 4 bits are used) from the tiny
3386   data area pointer.
3387 ENUM
3388   BFD_RELOC_V850_TDA_4_4_OFFSET
3389 ENUMDOC
3390   This is a 4 bit offset from the tiny data area pointer.
3391 ENUM
3392   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3393 ENUMDOC
3394   This is a 16 bit offset from the short data area pointer, with the
3395   bits placed non-contiguously in the instruction.
3396 ENUM
3397   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3398 ENUMDOC
3399   This is a 16 bit offset from the zero data area pointer, with the
3400   bits placed non-contiguously in the instruction.
3401 ENUM
3402   BFD_RELOC_V850_CALLT_6_7_OFFSET
3403 ENUMDOC
3404   This is a 6 bit offset from the call table base pointer.
3405 ENUM
3406   BFD_RELOC_V850_CALLT_16_16_OFFSET
3407 ENUMDOC
3408   This is a 16 bit offset from the call table base pointer.
3409 ENUM
3410   BFD_RELOC_V850_LONGCALL
3411 ENUMDOC
3412   Used for relaxing indirect function calls.
3413 ENUM
3414   BFD_RELOC_V850_LONGJUMP
3415 ENUMDOC
3416   Used for relaxing indirect jumps.
3417 ENUM
3418   BFD_RELOC_V850_ALIGN
3419 ENUMDOC
3420   Used to maintain alignment whilst relaxing.
3421 ENUM
3422   BFD_RELOC_V850_LO16_SPLIT_OFFSET
3423 ENUMDOC
3424   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3425   instructions.
3426 ENUM
3427   BFD_RELOC_MN10300_32_PCREL
3428 ENUMDOC
3429   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
3430   instruction.
3431 ENUM
3432   BFD_RELOC_MN10300_16_PCREL
3433 ENUMDOC
3434   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
3435   instruction.
3436
3437 ENUM
3438   BFD_RELOC_TIC30_LDP
3439 ENUMDOC
3440   This is a 8bit DP reloc for the tms320c30, where the most
3441   significant 8 bits of a 24 bit word are placed into the least
3442   significant 8 bits of the opcode.
3443
3444 ENUM
3445   BFD_RELOC_TIC54X_PARTLS7
3446 ENUMDOC
3447   This is a 7bit reloc for the tms320c54x, where the least
3448   significant 7 bits of a 16 bit word are placed into the least
3449   significant 7 bits of the opcode.
3450
3451 ENUM
3452   BFD_RELOC_TIC54X_PARTMS9
3453 ENUMDOC
3454   This is a 9bit DP reloc for the tms320c54x, where the most
3455   significant 9 bits of a 16 bit word are placed into the least
3456   significant 9 bits of the opcode.
3457
3458 ENUM
3459   BFD_RELOC_TIC54X_23
3460 ENUMDOC
3461   This is an extended address 23-bit reloc for the tms320c54x.
3462
3463 ENUM
3464   BFD_RELOC_TIC54X_16_OF_23
3465 ENUMDOC
3466   This is a 16-bit reloc for the tms320c54x, where the least
3467   significant 16 bits of a 23-bit extended address are placed into
3468   the opcode.
3469
3470 ENUM
3471   BFD_RELOC_TIC54X_MS7_OF_23
3472 ENUMDOC
3473   This is a reloc for the tms320c54x, where the most
3474   significant 7 bits of a 23-bit extended address are placed into
3475   the opcode.
3476
3477 ENUM
3478   BFD_RELOC_FR30_48
3479 ENUMDOC
3480   This is a 48 bit reloc for the FR30 that stores 32 bits.
3481 ENUM
3482   BFD_RELOC_FR30_20
3483 ENUMDOC
3484   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
3485   two sections.
3486 ENUM
3487   BFD_RELOC_FR30_6_IN_4
3488 ENUMDOC
3489   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
3490   4 bits.
3491 ENUM
3492   BFD_RELOC_FR30_8_IN_8
3493 ENUMDOC
3494   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
3495   into 8 bits.
3496 ENUM
3497   BFD_RELOC_FR30_9_IN_8
3498 ENUMDOC
3499   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
3500   into 8 bits.
3501 ENUM
3502   BFD_RELOC_FR30_10_IN_8
3503 ENUMDOC
3504   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
3505   into 8 bits.
3506 ENUM
3507   BFD_RELOC_FR30_9_PCREL
3508 ENUMDOC
3509   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
3510   short offset into 8 bits.
3511 ENUM
3512   BFD_RELOC_FR30_12_PCREL
3513 ENUMDOC
3514   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
3515   short offset into 11 bits.
3516
3517 ENUM
3518   BFD_RELOC_MCORE_PCREL_IMM8BY4
3519 ENUMX
3520   BFD_RELOC_MCORE_PCREL_IMM11BY2
3521 ENUMX
3522   BFD_RELOC_MCORE_PCREL_IMM4BY2
3523 ENUMX
3524   BFD_RELOC_MCORE_PCREL_32
3525 ENUMX
3526   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
3527 ENUMX
3528   BFD_RELOC_MCORE_RVA
3529 ENUMDOC
3530   Motorola Mcore relocations.
3531
3532 ENUM
3533   BFD_RELOC_MMIX_GETA
3534 ENUMX
3535   BFD_RELOC_MMIX_GETA_1
3536 ENUMX
3537   BFD_RELOC_MMIX_GETA_2
3538 ENUMX
3539   BFD_RELOC_MMIX_GETA_3
3540 ENUMDOC
3541   These are relocations for the GETA instruction.
3542 ENUM
3543   BFD_RELOC_MMIX_CBRANCH
3544 ENUMX
3545   BFD_RELOC_MMIX_CBRANCH_J
3546 ENUMX
3547   BFD_RELOC_MMIX_CBRANCH_1
3548 ENUMX
3549   BFD_RELOC_MMIX_CBRANCH_2
3550 ENUMX
3551   BFD_RELOC_MMIX_CBRANCH_3
3552 ENUMDOC
3553   These are relocations for a conditional branch instruction.
3554 ENUM
3555   BFD_RELOC_MMIX_PUSHJ
3556 ENUMX
3557   BFD_RELOC_MMIX_PUSHJ_1
3558 ENUMX
3559   BFD_RELOC_MMIX_PUSHJ_2
3560 ENUMX
3561   BFD_RELOC_MMIX_PUSHJ_3
3562 ENUMX
3563   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
3564 ENUMDOC
3565   These are relocations for the PUSHJ instruction.
3566 ENUM
3567   BFD_RELOC_MMIX_JMP
3568 ENUMX
3569   BFD_RELOC_MMIX_JMP_1
3570 ENUMX
3571   BFD_RELOC_MMIX_JMP_2
3572 ENUMX
3573   BFD_RELOC_MMIX_JMP_3
3574 ENUMDOC
3575   These are relocations for the JMP instruction.
3576 ENUM
3577   BFD_RELOC_MMIX_ADDR19
3578 ENUMDOC
3579   This is a relocation for a relative address as in a GETA instruction or
3580   a branch.
3581 ENUM
3582   BFD_RELOC_MMIX_ADDR27
3583 ENUMDOC
3584   This is a relocation for a relative address as in a JMP instruction.
3585 ENUM
3586   BFD_RELOC_MMIX_REG_OR_BYTE
3587 ENUMDOC
3588   This is a relocation for an instruction field that may be a general
3589   register or a value 0..255.
3590 ENUM
3591   BFD_RELOC_MMIX_REG
3592 ENUMDOC
3593   This is a relocation for an instruction field that may be a general
3594   register.
3595 ENUM
3596   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
3597 ENUMDOC
3598   This is a relocation for two instruction fields holding a register and
3599   an offset, the equivalent of the relocation.
3600 ENUM
3601   BFD_RELOC_MMIX_LOCAL
3602 ENUMDOC
3603   This relocation is an assertion that the expression is not allocated as
3604   a global register.  It does not modify contents.
3605
3606 ENUM
3607   BFD_RELOC_AVR_7_PCREL
3608 ENUMDOC
3609   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
3610   short offset into 7 bits.
3611 ENUM
3612   BFD_RELOC_AVR_13_PCREL
3613 ENUMDOC
3614   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
3615   short offset into 12 bits.
3616 ENUM
3617   BFD_RELOC_AVR_16_PM
3618 ENUMDOC
3619   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
3620   program memory address) into 16 bits.
3621 ENUM
3622   BFD_RELOC_AVR_LO8_LDI
3623 ENUMDOC
3624   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3625   data memory address) into 8 bit immediate value of LDI insn.
3626 ENUM
3627   BFD_RELOC_AVR_HI8_LDI
3628 ENUMDOC
3629   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3630   of data memory address) into 8 bit immediate value of LDI insn.
3631 ENUM
3632   BFD_RELOC_AVR_HH8_LDI
3633 ENUMDOC
3634   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3635   of program memory address) into 8 bit immediate value of LDI insn.
3636 ENUM
3637   BFD_RELOC_AVR_MS8_LDI
3638 ENUMDOC
3639   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3640   of 32 bit value) into 8 bit immediate value of LDI insn.
3641 ENUM
3642   BFD_RELOC_AVR_LO8_LDI_NEG
3643 ENUMDOC
3644   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3645   (usually data memory address) into 8 bit immediate value of SUBI insn.
3646 ENUM
3647   BFD_RELOC_AVR_HI8_LDI_NEG
3648 ENUMDOC
3649   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3650   (high 8 bit of data memory address) into 8 bit immediate value of
3651   SUBI insn.
3652 ENUM
3653   BFD_RELOC_AVR_HH8_LDI_NEG
3654 ENUMDOC
3655   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3656   (most high 8 bit of program memory address) into 8 bit immediate value
3657   of LDI or SUBI insn.
3658 ENUM
3659   BFD_RELOC_AVR_MS8_LDI_NEG
3660 ENUMDOC
3661   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
3662   of 32 bit value) into 8 bit immediate value of LDI insn.
3663 ENUM
3664   BFD_RELOC_AVR_LO8_LDI_PM
3665 ENUMDOC
3666   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3667   command address) into 8 bit immediate value of LDI insn.
3668 ENUM
3669   BFD_RELOC_AVR_HI8_LDI_PM
3670 ENUMDOC
3671   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3672   of command address) into 8 bit immediate value of LDI insn.
3673 ENUM
3674   BFD_RELOC_AVR_HH8_LDI_PM
3675 ENUMDOC
3676   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3677   of command address) into 8 bit immediate value of LDI insn.
3678 ENUM
3679   BFD_RELOC_AVR_LO8_LDI_PM_NEG
3680 ENUMDOC
3681   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3682   (usually command address) into 8 bit immediate value of SUBI insn.
3683 ENUM
3684   BFD_RELOC_AVR_HI8_LDI_PM_NEG
3685 ENUMDOC
3686   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3687   (high 8 bit of 16 bit command address) into 8 bit immediate value
3688   of SUBI insn.
3689 ENUM
3690   BFD_RELOC_AVR_HH8_LDI_PM_NEG
3691 ENUMDOC
3692   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3693   (high 6 bit of 22 bit command address) into 8 bit immediate
3694   value of SUBI insn.
3695 ENUM
3696   BFD_RELOC_AVR_CALL
3697 ENUMDOC
3698   This is a 32 bit reloc for the AVR that stores 23 bit value
3699   into 22 bits.
3700 ENUM
3701   BFD_RELOC_AVR_LDI
3702 ENUMDOC
3703   This is a 16 bit reloc for the AVR that stores all needed bits
3704   for absolute addressing with ldi with overflow check to linktime
3705 ENUM
3706   BFD_RELOC_AVR_6
3707 ENUMDOC
3708   This is a 6 bit reloc for the AVR that stores offset for ldd/std
3709   instructions
3710 ENUM
3711   BFD_RELOC_AVR_6_ADIW
3712 ENUMDOC
3713   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
3714   instructions
3715
3716 ENUM
3717   BFD_RELOC_390_12
3718 ENUMDOC
3719    Direct 12 bit.
3720 ENUM
3721   BFD_RELOC_390_GOT12
3722 ENUMDOC
3723   12 bit GOT offset.
3724 ENUM
3725   BFD_RELOC_390_PLT32
3726 ENUMDOC
3727   32 bit PC relative PLT address.
3728 ENUM
3729   BFD_RELOC_390_COPY
3730 ENUMDOC
3731   Copy symbol at runtime.
3732 ENUM
3733   BFD_RELOC_390_GLOB_DAT
3734 ENUMDOC
3735   Create GOT entry.
3736 ENUM
3737   BFD_RELOC_390_JMP_SLOT
3738 ENUMDOC
3739   Create PLT entry.
3740 ENUM
3741   BFD_RELOC_390_RELATIVE
3742 ENUMDOC
3743   Adjust by program base.
3744 ENUM
3745   BFD_RELOC_390_GOTPC
3746 ENUMDOC
3747   32 bit PC relative offset to GOT.
3748 ENUM
3749   BFD_RELOC_390_GOT16
3750 ENUMDOC
3751   16 bit GOT offset.
3752 ENUM
3753   BFD_RELOC_390_PC16DBL
3754 ENUMDOC
3755   PC relative 16 bit shifted by 1.
3756 ENUM
3757   BFD_RELOC_390_PLT16DBL
3758 ENUMDOC
3759   16 bit PC rel. PLT shifted by 1.
3760 ENUM
3761   BFD_RELOC_390_PC32DBL
3762 ENUMDOC
3763   PC relative 32 bit shifted by 1.
3764 ENUM
3765   BFD_RELOC_390_PLT32DBL
3766 ENUMDOC
3767   32 bit PC rel. PLT shifted by 1.
3768 ENUM
3769   BFD_RELOC_390_GOTPCDBL
3770 ENUMDOC
3771   32 bit PC rel. GOT shifted by 1.
3772 ENUM
3773   BFD_RELOC_390_GOT64
3774 ENUMDOC
3775   64 bit GOT offset.
3776 ENUM
3777   BFD_RELOC_390_PLT64
3778 ENUMDOC
3779   64 bit PC relative PLT address.
3780 ENUM
3781   BFD_RELOC_390_GOTENT
3782 ENUMDOC
3783   32 bit rel. offset to GOT entry.
3784 ENUM
3785   BFD_RELOC_390_GOTOFF64
3786 ENUMDOC
3787   64 bit offset to GOT.
3788 ENUM
3789   BFD_RELOC_390_GOTPLT12
3790 ENUMDOC
3791   12-bit offset to symbol-entry within GOT, with PLT handling.
3792 ENUM
3793   BFD_RELOC_390_GOTPLT16
3794 ENUMDOC
3795   16-bit offset to symbol-entry within GOT, with PLT handling.
3796 ENUM
3797   BFD_RELOC_390_GOTPLT32
3798 ENUMDOC
3799   32-bit offset to symbol-entry within GOT, with PLT handling.
3800 ENUM
3801   BFD_RELOC_390_GOTPLT64
3802 ENUMDOC
3803   64-bit offset to symbol-entry within GOT, with PLT handling.
3804 ENUM
3805   BFD_RELOC_390_GOTPLTENT
3806 ENUMDOC
3807   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
3808 ENUM
3809   BFD_RELOC_390_PLTOFF16
3810 ENUMDOC
3811   16-bit rel. offset from the GOT to a PLT entry.
3812 ENUM
3813   BFD_RELOC_390_PLTOFF32
3814 ENUMDOC
3815   32-bit rel. offset from the GOT to a PLT entry.
3816 ENUM
3817   BFD_RELOC_390_PLTOFF64
3818 ENUMDOC
3819   64-bit rel. offset from the GOT to a PLT entry.
3820
3821 ENUM
3822   BFD_RELOC_390_TLS_LOAD
3823 ENUMX
3824   BFD_RELOC_390_TLS_GDCALL
3825 ENUMX
3826   BFD_RELOC_390_TLS_LDCALL
3827 ENUMX
3828   BFD_RELOC_390_TLS_GD32
3829 ENUMX
3830   BFD_RELOC_390_TLS_GD64
3831 ENUMX
3832   BFD_RELOC_390_TLS_GOTIE12
3833 ENUMX
3834   BFD_RELOC_390_TLS_GOTIE32
3835 ENUMX
3836   BFD_RELOC_390_TLS_GOTIE64
3837 ENUMX
3838   BFD_RELOC_390_TLS_LDM32
3839 ENUMX
3840   BFD_RELOC_390_TLS_LDM64
3841 ENUMX
3842   BFD_RELOC_390_TLS_IE32
3843 ENUMX
3844   BFD_RELOC_390_TLS_IE64
3845 ENUMX
3846   BFD_RELOC_390_TLS_IEENT
3847 ENUMX
3848   BFD_RELOC_390_TLS_LE32
3849 ENUMX
3850   BFD_RELOC_390_TLS_LE64
3851 ENUMX
3852   BFD_RELOC_390_TLS_LDO32
3853 ENUMX
3854   BFD_RELOC_390_TLS_LDO64
3855 ENUMX
3856   BFD_RELOC_390_TLS_DTPMOD
3857 ENUMX
3858   BFD_RELOC_390_TLS_DTPOFF
3859 ENUMX
3860   BFD_RELOC_390_TLS_TPOFF
3861 ENUMDOC
3862   s390 tls relocations.
3863
3864 ENUM
3865   BFD_RELOC_390_20
3866 ENUMX
3867   BFD_RELOC_390_GOT20
3868 ENUMX
3869   BFD_RELOC_390_GOTPLT20
3870 ENUMX
3871   BFD_RELOC_390_TLS_GOTIE20
3872 ENUMDOC
3873   Long displacement extension.
3874
3875 ENUM
3876   BFD_RELOC_IP2K_FR9
3877 ENUMDOC
3878   Scenix IP2K - 9-bit register number / data address
3879 ENUM
3880   BFD_RELOC_IP2K_BANK
3881 ENUMDOC
3882   Scenix IP2K - 4-bit register/data bank number
3883 ENUM
3884   BFD_RELOC_IP2K_ADDR16CJP
3885 ENUMDOC
3886   Scenix IP2K - low 13 bits of instruction word address
3887 ENUM
3888   BFD_RELOC_IP2K_PAGE3
3889 ENUMDOC
3890   Scenix IP2K - high 3 bits of instruction word address
3891 ENUM
3892   BFD_RELOC_IP2K_LO8DATA
3893 ENUMX
3894   BFD_RELOC_IP2K_HI8DATA
3895 ENUMX
3896   BFD_RELOC_IP2K_EX8DATA
3897 ENUMDOC
3898   Scenix IP2K - ext/low/high 8 bits of data address
3899 ENUM
3900   BFD_RELOC_IP2K_LO8INSN
3901 ENUMX
3902   BFD_RELOC_IP2K_HI8INSN
3903 ENUMDOC
3904   Scenix IP2K - low/high 8 bits of instruction word address
3905 ENUM
3906   BFD_RELOC_IP2K_PC_SKIP
3907 ENUMDOC
3908   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
3909 ENUM
3910   BFD_RELOC_IP2K_TEXT
3911 ENUMDOC
3912   Scenix IP2K - 16 bit word address in text section.
3913 ENUM
3914   BFD_RELOC_IP2K_FR_OFFSET
3915 ENUMDOC
3916   Scenix IP2K - 7-bit sp or dp offset
3917 ENUM
3918   BFD_RELOC_VPE4KMATH_DATA
3919 ENUMX
3920   BFD_RELOC_VPE4KMATH_INSN
3921 ENUMDOC
3922   Scenix VPE4K coprocessor - data/insn-space addressing
3923
3924 ENUM
3925   BFD_RELOC_VTABLE_INHERIT
3926 ENUMX
3927   BFD_RELOC_VTABLE_ENTRY
3928 ENUMDOC
3929   These two relocations are used by the linker to determine which of
3930   the entries in a C++ virtual function table are actually used.  When
3931   the --gc-sections option is given, the linker will zero out the entries
3932   that are not used, so that the code for those functions need not be
3933   included in the output.
3934
3935   VTABLE_INHERIT is a zero-space relocation used to describe to the
3936   linker the inheritance tree of a C++ virtual function table.  The
3937   relocation's symbol should be the parent class' vtable, and the
3938   relocation should be located at the child vtable.
3939
3940   VTABLE_ENTRY is a zero-space relocation that describes the use of a
3941   virtual function table entry.  The reloc's symbol should refer to the
3942   table of the class mentioned in the code.  Off of that base, an offset
3943   describes the entry that is being used.  For Rela hosts, this offset
3944   is stored in the reloc's addend.  For Rel hosts, we are forced to put
3945   this offset in the reloc's section offset.
3946
3947 ENUM
3948   BFD_RELOC_IA64_IMM14
3949 ENUMX
3950   BFD_RELOC_IA64_IMM22
3951 ENUMX
3952   BFD_RELOC_IA64_IMM64
3953 ENUMX
3954   BFD_RELOC_IA64_DIR32MSB
3955 ENUMX
3956   BFD_RELOC_IA64_DIR32LSB
3957 ENUMX
3958   BFD_RELOC_IA64_DIR64MSB
3959 ENUMX
3960   BFD_RELOC_IA64_DIR64LSB
3961 ENUMX
3962   BFD_RELOC_IA64_GPREL22
3963 ENUMX
3964   BFD_RELOC_IA64_GPREL64I
3965 ENUMX
3966   BFD_RELOC_IA64_GPREL32MSB
3967 ENUMX
3968   BFD_RELOC_IA64_GPREL32LSB
3969 ENUMX
3970   BFD_RELOC_IA64_GPREL64MSB
3971 ENUMX
3972   BFD_RELOC_IA64_GPREL64LSB
3973 ENUMX
3974   BFD_RELOC_IA64_LTOFF22
3975 ENUMX
3976   BFD_RELOC_IA64_LTOFF64I
3977 ENUMX
3978   BFD_RELOC_IA64_PLTOFF22
3979 ENUMX
3980   BFD_RELOC_IA64_PLTOFF64I
3981 ENUMX
3982   BFD_RELOC_IA64_PLTOFF64MSB
3983 ENUMX
3984   BFD_RELOC_IA64_PLTOFF64LSB
3985 ENUMX
3986   BFD_RELOC_IA64_FPTR64I
3987 ENUMX
3988   BFD_RELOC_IA64_FPTR32MSB
3989 ENUMX
3990   BFD_RELOC_IA64_FPTR32LSB
3991 ENUMX
3992   BFD_RELOC_IA64_FPTR64MSB
3993 ENUMX
3994   BFD_RELOC_IA64_FPTR64LSB
3995 ENUMX
3996   BFD_RELOC_IA64_PCREL21B
3997 ENUMX
3998   BFD_RELOC_IA64_PCREL21BI
3999 ENUMX
4000   BFD_RELOC_IA64_PCREL21M
4001 ENUMX
4002   BFD_RELOC_IA64_PCREL21F
4003 ENUMX
4004   BFD_RELOC_IA64_PCREL22
4005 ENUMX
4006   BFD_RELOC_IA64_PCREL60B
4007 ENUMX
4008   BFD_RELOC_IA64_PCREL64I
4009 ENUMX
4010   BFD_RELOC_IA64_PCREL32MSB
4011 ENUMX
4012   BFD_RELOC_IA64_PCREL32LSB
4013 ENUMX
4014   BFD_RELOC_IA64_PCREL64MSB
4015 ENUMX
4016   BFD_RELOC_IA64_PCREL64LSB
4017 ENUMX
4018   BFD_RELOC_IA64_LTOFF_FPTR22
4019 ENUMX
4020   BFD_RELOC_IA64_LTOFF_FPTR64I
4021 ENUMX
4022   BFD_RELOC_IA64_LTOFF_FPTR32MSB
4023 ENUMX
4024   BFD_RELOC_IA64_LTOFF_FPTR32LSB
4025 ENUMX
4026   BFD_RELOC_IA64_LTOFF_FPTR64MSB
4027 ENUMX
4028   BFD_RELOC_IA64_LTOFF_FPTR64LSB
4029 ENUMX
4030   BFD_RELOC_IA64_SEGREL32MSB
4031 ENUMX
4032   BFD_RELOC_IA64_SEGREL32LSB
4033 ENUMX
4034   BFD_RELOC_IA64_SEGREL64MSB
4035 ENUMX
4036   BFD_RELOC_IA64_SEGREL64LSB
4037 ENUMX
4038   BFD_RELOC_IA64_SECREL32MSB
4039 ENUMX
4040   BFD_RELOC_IA64_SECREL32LSB
4041 ENUMX
4042   BFD_RELOC_IA64_SECREL64MSB
4043 ENUMX
4044   BFD_RELOC_IA64_SECREL64LSB
4045 ENUMX
4046   BFD_RELOC_IA64_REL32MSB
4047 ENUMX
4048   BFD_RELOC_IA64_REL32LSB
4049 ENUMX
4050   BFD_RELOC_IA64_REL64MSB
4051 ENUMX
4052   BFD_RELOC_IA64_REL64LSB
4053 ENUMX
4054   BFD_RELOC_IA64_LTV32MSB
4055 ENUMX
4056   BFD_RELOC_IA64_LTV32LSB
4057 ENUMX
4058   BFD_RELOC_IA64_LTV64MSB
4059 ENUMX
4060   BFD_RELOC_IA64_LTV64LSB
4061 ENUMX
4062   BFD_RELOC_IA64_IPLTMSB
4063 ENUMX
4064   BFD_RELOC_IA64_IPLTLSB
4065 ENUMX
4066   BFD_RELOC_IA64_COPY
4067 ENUMX
4068   BFD_RELOC_IA64_LTOFF22X
4069 ENUMX
4070   BFD_RELOC_IA64_LDXMOV
4071 ENUMX
4072   BFD_RELOC_IA64_TPREL14
4073 ENUMX
4074   BFD_RELOC_IA64_TPREL22
4075 ENUMX
4076   BFD_RELOC_IA64_TPREL64I
4077 ENUMX
4078   BFD_RELOC_IA64_TPREL64MSB
4079 ENUMX
4080   BFD_RELOC_IA64_TPREL64LSB
4081 ENUMX
4082   BFD_RELOC_IA64_LTOFF_TPREL22
4083 ENUMX
4084   BFD_RELOC_IA64_DTPMOD64MSB
4085 ENUMX
4086   BFD_RELOC_IA64_DTPMOD64LSB
4087 ENUMX
4088   BFD_RELOC_IA64_LTOFF_DTPMOD22
4089 ENUMX
4090   BFD_RELOC_IA64_DTPREL14
4091 ENUMX
4092   BFD_RELOC_IA64_DTPREL22
4093 ENUMX
4094   BFD_RELOC_IA64_DTPREL64I
4095 ENUMX
4096   BFD_RELOC_IA64_DTPREL32MSB
4097 ENUMX
4098   BFD_RELOC_IA64_DTPREL32LSB
4099 ENUMX
4100   BFD_RELOC_IA64_DTPREL64MSB
4101 ENUMX
4102   BFD_RELOC_IA64_DTPREL64LSB
4103 ENUMX
4104   BFD_RELOC_IA64_LTOFF_DTPREL22
4105 ENUMDOC
4106   Intel IA64 Relocations.
4107
4108 ENUM
4109   BFD_RELOC_M68HC11_HI8
4110 ENUMDOC
4111   Motorola 68HC11 reloc.
4112   This is the 8 bit high part of an absolute address.
4113 ENUM
4114   BFD_RELOC_M68HC11_LO8
4115 ENUMDOC
4116   Motorola 68HC11 reloc.
4117   This is the 8 bit low part of an absolute address.
4118 ENUM
4119   BFD_RELOC_M68HC11_3B
4120 ENUMDOC
4121   Motorola 68HC11 reloc.
4122   This is the 3 bit of a value.
4123 ENUM
4124   BFD_RELOC_M68HC11_RL_JUMP
4125 ENUMDOC
4126   Motorola 68HC11 reloc.
4127   This reloc marks the beginning of a jump/call instruction.
4128   It is used for linker relaxation to correctly identify beginning
4129   of instruction and change some branches to use PC-relative
4130   addressing mode.
4131 ENUM
4132   BFD_RELOC_M68HC11_RL_GROUP
4133 ENUMDOC
4134   Motorola 68HC11 reloc.
4135   This reloc marks a group of several instructions that gcc generates
4136   and for which the linker relaxation pass can modify and/or remove
4137   some of them.
4138 ENUM
4139   BFD_RELOC_M68HC11_LO16
4140 ENUMDOC
4141   Motorola 68HC11 reloc.
4142   This is the 16-bit lower part of an address.  It is used for 'call'
4143   instruction to specify the symbol address without any special
4144   transformation (due to memory bank window).
4145 ENUM
4146   BFD_RELOC_M68HC11_PAGE
4147 ENUMDOC
4148   Motorola 68HC11 reloc.
4149   This is a 8-bit reloc that specifies the page number of an address.
4150   It is used by 'call' instruction to specify the page number of
4151   the symbol.
4152 ENUM
4153   BFD_RELOC_M68HC11_24
4154 ENUMDOC
4155   Motorola 68HC11 reloc.
4156   This is a 24-bit reloc that represents the address with a 16-bit
4157   value and a 8-bit page number.  The symbol address is transformed
4158   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
4159 ENUM
4160   BFD_RELOC_M68HC12_5B
4161 ENUMDOC
4162   Motorola 68HC12 reloc.
4163   This is the 5 bits of a value.
4164
4165 ENUM
4166   BFD_RELOC_16C_NUM08
4167 ENUMX
4168   BFD_RELOC_16C_NUM08_C
4169 ENUMX
4170   BFD_RELOC_16C_NUM16
4171 ENUMX
4172   BFD_RELOC_16C_NUM16_C
4173 ENUMX
4174   BFD_RELOC_16C_NUM32
4175 ENUMX
4176   BFD_RELOC_16C_NUM32_C
4177 ENUMX
4178   BFD_RELOC_16C_DISP04
4179 ENUMX
4180   BFD_RELOC_16C_DISP04_C
4181 ENUMX
4182   BFD_RELOC_16C_DISP08
4183 ENUMX
4184   BFD_RELOC_16C_DISP08_C
4185 ENUMX
4186   BFD_RELOC_16C_DISP16
4187 ENUMX
4188   BFD_RELOC_16C_DISP16_C
4189 ENUMX
4190   BFD_RELOC_16C_DISP24
4191 ENUMX
4192   BFD_RELOC_16C_DISP24_C
4193 ENUMX
4194   BFD_RELOC_16C_DISP24a
4195 ENUMX
4196   BFD_RELOC_16C_DISP24a_C
4197 ENUMX
4198   BFD_RELOC_16C_REG04
4199 ENUMX
4200   BFD_RELOC_16C_REG04_C
4201 ENUMX
4202   BFD_RELOC_16C_REG04a
4203 ENUMX
4204   BFD_RELOC_16C_REG04a_C
4205 ENUMX
4206   BFD_RELOC_16C_REG14
4207 ENUMX
4208   BFD_RELOC_16C_REG14_C
4209 ENUMX
4210   BFD_RELOC_16C_REG16
4211 ENUMX
4212   BFD_RELOC_16C_REG16_C
4213 ENUMX
4214   BFD_RELOC_16C_REG20
4215 ENUMX
4216   BFD_RELOC_16C_REG20_C
4217 ENUMX
4218   BFD_RELOC_16C_ABS20
4219 ENUMX
4220   BFD_RELOC_16C_ABS20_C
4221 ENUMX
4222   BFD_RELOC_16C_ABS24
4223 ENUMX
4224   BFD_RELOC_16C_ABS24_C
4225 ENUMX
4226   BFD_RELOC_16C_IMM04
4227 ENUMX
4228   BFD_RELOC_16C_IMM04_C
4229 ENUMX
4230   BFD_RELOC_16C_IMM16
4231 ENUMX
4232   BFD_RELOC_16C_IMM16_C
4233 ENUMX
4234   BFD_RELOC_16C_IMM20
4235 ENUMX
4236   BFD_RELOC_16C_IMM20_C
4237 ENUMX
4238   BFD_RELOC_16C_IMM24
4239 ENUMX
4240   BFD_RELOC_16C_IMM24_C
4241 ENUMX
4242   BFD_RELOC_16C_IMM32
4243 ENUMX
4244   BFD_RELOC_16C_IMM32_C
4245 ENUMDOC
4246   NS CR16C Relocations.
4247
4248 ENUM
4249   BFD_RELOC_CRX_REL4
4250 ENUMX
4251   BFD_RELOC_CRX_REL8
4252 ENUMX
4253   BFD_RELOC_CRX_REL8_CMP
4254 ENUMX
4255   BFD_RELOC_CRX_REL16
4256 ENUMX
4257   BFD_RELOC_CRX_REL24
4258 ENUMX
4259   BFD_RELOC_CRX_REL32
4260 ENUMX
4261   BFD_RELOC_CRX_REGREL12
4262 ENUMX
4263   BFD_RELOC_CRX_REGREL22
4264 ENUMX
4265   BFD_RELOC_CRX_REGREL28
4266 ENUMX
4267   BFD_RELOC_CRX_REGREL32
4268 ENUMX
4269   BFD_RELOC_CRX_ABS16
4270 ENUMX
4271   BFD_RELOC_CRX_ABS32
4272 ENUMX
4273   BFD_RELOC_CRX_NUM8
4274 ENUMX
4275   BFD_RELOC_CRX_NUM16
4276 ENUMX
4277   BFD_RELOC_CRX_NUM32
4278 ENUMX
4279   BFD_RELOC_CRX_IMM16
4280 ENUMX
4281   BFD_RELOC_CRX_IMM32
4282 ENUMX
4283   BFD_RELOC_CRX_SWITCH8
4284 ENUMX
4285   BFD_RELOC_CRX_SWITCH16
4286 ENUMX
4287   BFD_RELOC_CRX_SWITCH32
4288 ENUMDOC
4289   NS CRX Relocations.
4290
4291 ENUM
4292   BFD_RELOC_CRIS_BDISP8
4293 ENUMX
4294   BFD_RELOC_CRIS_UNSIGNED_5
4295 ENUMX
4296   BFD_RELOC_CRIS_SIGNED_6
4297 ENUMX
4298   BFD_RELOC_CRIS_UNSIGNED_6
4299 ENUMX
4300   BFD_RELOC_CRIS_SIGNED_8
4301 ENUMX
4302   BFD_RELOC_CRIS_UNSIGNED_8
4303 ENUMX
4304   BFD_RELOC_CRIS_SIGNED_16
4305 ENUMX
4306   BFD_RELOC_CRIS_UNSIGNED_16
4307 ENUMX
4308   BFD_RELOC_CRIS_LAPCQ_OFFSET
4309 ENUMX
4310   BFD_RELOC_CRIS_UNSIGNED_4
4311 ENUMDOC
4312   These relocs are only used within the CRIS assembler.  They are not
4313   (at present) written to any object files.
4314 ENUM
4315   BFD_RELOC_CRIS_COPY
4316 ENUMX
4317   BFD_RELOC_CRIS_GLOB_DAT
4318 ENUMX
4319   BFD_RELOC_CRIS_JUMP_SLOT
4320 ENUMX
4321   BFD_RELOC_CRIS_RELATIVE
4322 ENUMDOC
4323   Relocs used in ELF shared libraries for CRIS.
4324 ENUM
4325   BFD_RELOC_CRIS_32_GOT
4326 ENUMDOC
4327   32-bit offset to symbol-entry within GOT.
4328 ENUM
4329   BFD_RELOC_CRIS_16_GOT
4330 ENUMDOC
4331   16-bit offset to symbol-entry within GOT.
4332 ENUM
4333   BFD_RELOC_CRIS_32_GOTPLT
4334 ENUMDOC
4335   32-bit offset to symbol-entry within GOT, with PLT handling.
4336 ENUM
4337   BFD_RELOC_CRIS_16_GOTPLT
4338 ENUMDOC
4339   16-bit offset to symbol-entry within GOT, with PLT handling.
4340 ENUM
4341   BFD_RELOC_CRIS_32_GOTREL
4342 ENUMDOC
4343   32-bit offset to symbol, relative to GOT.
4344 ENUM
4345   BFD_RELOC_CRIS_32_PLT_GOTREL
4346 ENUMDOC
4347   32-bit offset to symbol with PLT entry, relative to GOT.
4348 ENUM
4349   BFD_RELOC_CRIS_32_PLT_PCREL
4350 ENUMDOC
4351   32-bit offset to symbol with PLT entry, relative to this relocation.
4352
4353 ENUM
4354   BFD_RELOC_860_COPY
4355 ENUMX
4356   BFD_RELOC_860_GLOB_DAT
4357 ENUMX
4358   BFD_RELOC_860_JUMP_SLOT
4359 ENUMX
4360   BFD_RELOC_860_RELATIVE
4361 ENUMX
4362   BFD_RELOC_860_PC26
4363 ENUMX
4364   BFD_RELOC_860_PLT26
4365 ENUMX
4366   BFD_RELOC_860_PC16
4367 ENUMX
4368   BFD_RELOC_860_LOW0
4369 ENUMX
4370   BFD_RELOC_860_SPLIT0
4371 ENUMX
4372   BFD_RELOC_860_LOW1
4373 ENUMX
4374   BFD_RELOC_860_SPLIT1
4375 ENUMX
4376   BFD_RELOC_860_LOW2
4377 ENUMX
4378   BFD_RELOC_860_SPLIT2
4379 ENUMX
4380   BFD_RELOC_860_LOW3
4381 ENUMX
4382   BFD_RELOC_860_LOGOT0
4383 ENUMX
4384   BFD_RELOC_860_SPGOT0
4385 ENUMX
4386   BFD_RELOC_860_LOGOT1
4387 ENUMX
4388   BFD_RELOC_860_SPGOT1
4389 ENUMX
4390   BFD_RELOC_860_LOGOTOFF0
4391 ENUMX
4392   BFD_RELOC_860_SPGOTOFF0
4393 ENUMX
4394   BFD_RELOC_860_LOGOTOFF1
4395 ENUMX
4396   BFD_RELOC_860_SPGOTOFF1
4397 ENUMX
4398   BFD_RELOC_860_LOGOTOFF2
4399 ENUMX
4400   BFD_RELOC_860_LOGOTOFF3
4401 ENUMX
4402   BFD_RELOC_860_LOPC
4403 ENUMX
4404   BFD_RELOC_860_HIGHADJ
4405 ENUMX
4406   BFD_RELOC_860_HAGOT
4407 ENUMX
4408   BFD_RELOC_860_HAGOTOFF
4409 ENUMX
4410   BFD_RELOC_860_HAPC
4411 ENUMX
4412   BFD_RELOC_860_HIGH
4413 ENUMX
4414   BFD_RELOC_860_HIGOT
4415 ENUMX
4416   BFD_RELOC_860_HIGOTOFF
4417 ENUMDOC
4418   Intel i860 Relocations.
4419
4420 ENUM
4421   BFD_RELOC_OPENRISC_ABS_26
4422 ENUMX
4423   BFD_RELOC_OPENRISC_REL_26
4424 ENUMDOC
4425   OpenRISC Relocations.
4426
4427 ENUM
4428   BFD_RELOC_H8_DIR16A8
4429 ENUMX
4430   BFD_RELOC_H8_DIR16R8
4431 ENUMX
4432   BFD_RELOC_H8_DIR24A8
4433 ENUMX
4434   BFD_RELOC_H8_DIR24R8
4435 ENUMX
4436   BFD_RELOC_H8_DIR32A16
4437 ENUMDOC
4438   H8 elf Relocations.
4439
4440 ENUM
4441   BFD_RELOC_XSTORMY16_REL_12
4442 ENUMX
4443   BFD_RELOC_XSTORMY16_12
4444 ENUMX
4445   BFD_RELOC_XSTORMY16_24
4446 ENUMX
4447   BFD_RELOC_XSTORMY16_FPTR16
4448 ENUMDOC
4449   Sony Xstormy16 Relocations.
4450
4451 ENUM
4452   BFD_RELOC_XC16X_PAG
4453 ENUMX
4454   BFD_RELOC_XC16X_POF
4455 ENUMX
4456   BFD_RELOC_XC16X_SEG
4457 ENUMX
4458   BFD_RELOC_XC16X_SOF
4459 ENUMDOC
4460   Infineon Relocations.
4461
4462 ENUM
4463   BFD_RELOC_VAX_GLOB_DAT
4464 ENUMX
4465   BFD_RELOC_VAX_JMP_SLOT
4466 ENUMX
4467   BFD_RELOC_VAX_RELATIVE
4468 ENUMDOC
4469   Relocations used by VAX ELF.
4470
4471 ENUM
4472   BFD_RELOC_MT_PC16
4473 ENUMDOC
4474   Morpho MT - 16 bit immediate relocation.
4475 ENUM
4476   BFD_RELOC_MT_HI16
4477 ENUMDOC
4478   Morpho MT - Hi 16 bits of an address.
4479 ENUM
4480   BFD_RELOC_MT_LO16
4481 ENUMDOC
4482   Morpho MT - Low 16 bits of an address.
4483 ENUM
4484   BFD_RELOC_MT_GNU_VTINHERIT
4485 ENUMDOC
4486   Morpho MT - Used to tell the linker which vtable entries are used.
4487 ENUM
4488   BFD_RELOC_MT_GNU_VTENTRY
4489 ENUMDOC
4490   Morpho MT - Used to tell the linker which vtable entries are used.
4491 ENUM
4492   BFD_RELOC_MT_PCINSN8
4493 ENUMDOC
4494   Morpho MT - 8 bit immediate relocation.
4495
4496 ENUM
4497   BFD_RELOC_MSP430_10_PCREL
4498 ENUMX
4499   BFD_RELOC_MSP430_16_PCREL
4500 ENUMX
4501   BFD_RELOC_MSP430_16
4502 ENUMX
4503   BFD_RELOC_MSP430_16_PCREL_BYTE
4504 ENUMX
4505   BFD_RELOC_MSP430_16_BYTE
4506 ENUMX
4507   BFD_RELOC_MSP430_2X_PCREL
4508 ENUMX
4509   BFD_RELOC_MSP430_RL_PCREL
4510 ENUMDOC
4511   msp430 specific relocation codes
4512
4513 ENUM
4514   BFD_RELOC_IQ2000_OFFSET_16
4515 ENUMX
4516   BFD_RELOC_IQ2000_OFFSET_21
4517 ENUMX
4518   BFD_RELOC_IQ2000_UHI16
4519 ENUMDOC
4520   IQ2000 Relocations.
4521
4522 ENUM
4523   BFD_RELOC_XTENSA_RTLD
4524 ENUMDOC
4525   Special Xtensa relocation used only by PLT entries in ELF shared
4526   objects to indicate that the runtime linker should set the value
4527   to one of its own internal functions or data structures.
4528 ENUM
4529   BFD_RELOC_XTENSA_GLOB_DAT
4530 ENUMX
4531   BFD_RELOC_XTENSA_JMP_SLOT
4532 ENUMX
4533   BFD_RELOC_XTENSA_RELATIVE
4534 ENUMDOC
4535   Xtensa relocations for ELF shared objects.
4536 ENUM
4537   BFD_RELOC_XTENSA_PLT
4538 ENUMDOC
4539   Xtensa relocation used in ELF object files for symbols that may require
4540   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
4541 ENUM
4542   BFD_RELOC_XTENSA_DIFF8
4543 ENUMX
4544   BFD_RELOC_XTENSA_DIFF16
4545 ENUMX
4546   BFD_RELOC_XTENSA_DIFF32
4547 ENUMDOC
4548   Xtensa relocations to mark the difference of two local symbols.
4549   These are only needed to support linker relaxation and can be ignored
4550   when not relaxing.  The field is set to the value of the difference
4551   assuming no relaxation.  The relocation encodes the position of the
4552   first symbol so the linker can determine whether to adjust the field
4553   value.
4554 ENUM
4555   BFD_RELOC_XTENSA_SLOT0_OP
4556 ENUMX
4557   BFD_RELOC_XTENSA_SLOT1_OP
4558 ENUMX
4559   BFD_RELOC_XTENSA_SLOT2_OP
4560 ENUMX
4561   BFD_RELOC_XTENSA_SLOT3_OP
4562 ENUMX
4563   BFD_RELOC_XTENSA_SLOT4_OP
4564 ENUMX
4565   BFD_RELOC_XTENSA_SLOT5_OP
4566 ENUMX
4567   BFD_RELOC_XTENSA_SLOT6_OP
4568 ENUMX
4569   BFD_RELOC_XTENSA_SLOT7_OP
4570 ENUMX
4571   BFD_RELOC_XTENSA_SLOT8_OP
4572 ENUMX
4573   BFD_RELOC_XTENSA_SLOT9_OP
4574 ENUMX
4575   BFD_RELOC_XTENSA_SLOT10_OP
4576 ENUMX
4577   BFD_RELOC_XTENSA_SLOT11_OP
4578 ENUMX
4579   BFD_RELOC_XTENSA_SLOT12_OP
4580 ENUMX
4581   BFD_RELOC_XTENSA_SLOT13_OP
4582 ENUMX
4583   BFD_RELOC_XTENSA_SLOT14_OP
4584 ENUMDOC
4585   Generic Xtensa relocations for instruction operands.  Only the slot
4586   number is encoded in the relocation.  The relocation applies to the
4587   last PC-relative immediate operand, or if there are no PC-relative
4588   immediates, to the last immediate operand.
4589 ENUM
4590   BFD_RELOC_XTENSA_SLOT0_ALT
4591 ENUMX
4592   BFD_RELOC_XTENSA_SLOT1_ALT
4593 ENUMX
4594   BFD_RELOC_XTENSA_SLOT2_ALT
4595 ENUMX
4596   BFD_RELOC_XTENSA_SLOT3_ALT
4597 ENUMX
4598   BFD_RELOC_XTENSA_SLOT4_ALT
4599 ENUMX
4600   BFD_RELOC_XTENSA_SLOT5_ALT
4601 ENUMX
4602   BFD_RELOC_XTENSA_SLOT6_ALT
4603 ENUMX
4604   BFD_RELOC_XTENSA_SLOT7_ALT
4605 ENUMX
4606   BFD_RELOC_XTENSA_SLOT8_ALT
4607 ENUMX
4608   BFD_RELOC_XTENSA_SLOT9_ALT
4609 ENUMX
4610   BFD_RELOC_XTENSA_SLOT10_ALT
4611 ENUMX
4612   BFD_RELOC_XTENSA_SLOT11_ALT
4613 ENUMX
4614   BFD_RELOC_XTENSA_SLOT12_ALT
4615 ENUMX
4616   BFD_RELOC_XTENSA_SLOT13_ALT
4617 ENUMX
4618   BFD_RELOC_XTENSA_SLOT14_ALT
4619 ENUMDOC
4620   Alternate Xtensa relocations.  Only the slot is encoded in the
4621   relocation.  The meaning of these relocations is opcode-specific.
4622 ENUM
4623   BFD_RELOC_XTENSA_OP0
4624 ENUMX
4625   BFD_RELOC_XTENSA_OP1
4626 ENUMX
4627   BFD_RELOC_XTENSA_OP2
4628 ENUMDOC
4629   Xtensa relocations for backward compatibility.  These have all been
4630   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
4631 ENUM
4632   BFD_RELOC_XTENSA_ASM_EXPAND
4633 ENUMDOC
4634   Xtensa relocation to mark that the assembler expanded the
4635   instructions from an original target.  The expansion size is
4636   encoded in the reloc size.
4637 ENUM
4638   BFD_RELOC_XTENSA_ASM_SIMPLIFY
4639 ENUMDOC
4640   Xtensa relocation to mark that the linker should simplify
4641   assembler-expanded instructions.  This is commonly used
4642   internally by the linker after analysis of a
4643   BFD_RELOC_XTENSA_ASM_EXPAND.
4644
4645 ENUM
4646   BFD_RELOC_Z80_DISP8
4647 ENUMDOC
4648   8 bit signed offset in (ix+d) or (iy+d).
4649
4650 ENUM
4651   BFD_RELOC_Z8K_DISP7
4652 ENUMDOC
4653   DJNZ offset.
4654 ENUM
4655   BFD_RELOC_Z8K_CALLR
4656 ENUMDOC
4657   CALR offset.
4658 ENUM
4659   BFD_RELOC_Z8K_IMM4L
4660 ENUMDOC
4661   4 bit value.
4662
4663 ENDSENUM
4664   BFD_RELOC_UNUSED
4665 CODE_FRAGMENT
4666 .
4667 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
4668 */
4669
4670 /*
4671 FUNCTION
4672         bfd_reloc_type_lookup
4673
4674 SYNOPSIS
4675         reloc_howto_type *bfd_reloc_type_lookup
4676           (bfd *abfd, bfd_reloc_code_real_type code);
4677
4678 DESCRIPTION
4679         Return a pointer to a howto structure which, when
4680         invoked, will perform the relocation @var{code} on data from the
4681         architecture noted.
4682
4683 */
4684
4685 reloc_howto_type *
4686 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
4687 {
4688   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
4689 }
4690
4691 static reloc_howto_type bfd_howto_32 =
4692 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
4693
4694 /*
4695 INTERNAL_FUNCTION
4696         bfd_default_reloc_type_lookup
4697
4698 SYNOPSIS
4699         reloc_howto_type *bfd_default_reloc_type_lookup
4700           (bfd *abfd, bfd_reloc_code_real_type  code);
4701
4702 DESCRIPTION
4703         Provides a default relocation lookup routine for any architecture.
4704
4705 */
4706
4707 reloc_howto_type *
4708 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
4709 {
4710   switch (code)
4711     {
4712     case BFD_RELOC_CTOR:
4713       /* The type of reloc used in a ctor, which will be as wide as the
4714          address - so either a 64, 32, or 16 bitter.  */
4715       switch (bfd_get_arch_info (abfd)->bits_per_address)
4716         {
4717         case 64:
4718           BFD_FAIL ();
4719         case 32:
4720           return &bfd_howto_32;
4721         case 16:
4722           BFD_FAIL ();
4723         default:
4724           BFD_FAIL ();
4725         }
4726     default:
4727       BFD_FAIL ();
4728     }
4729   return NULL;
4730 }
4731
4732 /*
4733 FUNCTION
4734         bfd_get_reloc_code_name
4735
4736 SYNOPSIS
4737         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
4738
4739 DESCRIPTION
4740         Provides a printable name for the supplied relocation code.
4741         Useful mainly for printing error messages.
4742 */
4743
4744 const char *
4745 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
4746 {
4747   if (code > BFD_RELOC_UNUSED)
4748     return 0;
4749   return bfd_reloc_code_real_names[code];
4750 }
4751
4752 /*
4753 INTERNAL_FUNCTION
4754         bfd_generic_relax_section
4755
4756 SYNOPSIS
4757         bfd_boolean bfd_generic_relax_section
4758           (bfd *abfd,
4759            asection *section,
4760            struct bfd_link_info *,
4761            bfd_boolean *);
4762
4763 DESCRIPTION
4764         Provides default handling for relaxing for back ends which
4765         don't do relaxing.
4766 */
4767
4768 bfd_boolean
4769 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
4770                            asection *section ATTRIBUTE_UNUSED,
4771                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
4772                            bfd_boolean *again)
4773 {
4774   *again = FALSE;
4775   return TRUE;
4776 }
4777
4778 /*
4779 INTERNAL_FUNCTION
4780         bfd_generic_gc_sections
4781
4782 SYNOPSIS
4783         bfd_boolean bfd_generic_gc_sections
4784           (bfd *, struct bfd_link_info *);
4785
4786 DESCRIPTION
4787         Provides default handling for relaxing for back ends which
4788         don't do section gc -- i.e., does nothing.
4789 */
4790
4791 bfd_boolean
4792 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
4793                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
4794 {
4795   return TRUE;
4796 }
4797
4798 /*
4799 INTERNAL_FUNCTION
4800         bfd_generic_merge_sections
4801
4802 SYNOPSIS
4803         bfd_boolean bfd_generic_merge_sections
4804           (bfd *, struct bfd_link_info *);
4805
4806 DESCRIPTION
4807         Provides default handling for SEC_MERGE section merging for back ends
4808         which don't have SEC_MERGE support -- i.e., does nothing.
4809 */
4810
4811 bfd_boolean
4812 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
4813                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
4814 {
4815   return TRUE;
4816 }
4817
4818 /*
4819 INTERNAL_FUNCTION
4820         bfd_generic_get_relocated_section_contents
4821
4822 SYNOPSIS
4823         bfd_byte *bfd_generic_get_relocated_section_contents
4824           (bfd *abfd,
4825            struct bfd_link_info *link_info,
4826            struct bfd_link_order *link_order,
4827            bfd_byte *data,
4828            bfd_boolean relocatable,
4829            asymbol **symbols);
4830
4831 DESCRIPTION
4832         Provides default handling of relocation effort for back ends
4833         which can't be bothered to do it efficiently.
4834
4835 */
4836
4837 bfd_byte *
4838 bfd_generic_get_relocated_section_contents (bfd *abfd,
4839                                             struct bfd_link_info *link_info,
4840                                             struct bfd_link_order *link_order,
4841                                             bfd_byte *data,
4842                                             bfd_boolean relocatable,
4843                                             asymbol **symbols)
4844 {
4845   /* Get enough memory to hold the stuff.  */
4846   bfd *input_bfd = link_order->u.indirect.section->owner;
4847   asection *input_section = link_order->u.indirect.section;
4848
4849   long reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
4850   arelent **reloc_vector = NULL;
4851   long reloc_count;
4852   bfd_size_type sz;
4853
4854   if (reloc_size < 0)
4855     goto error_return;
4856
4857   reloc_vector = bfd_malloc (reloc_size);
4858   if (reloc_vector == NULL && reloc_size != 0)
4859     goto error_return;
4860
4861   /* Read in the section.  */
4862   sz = input_section->rawsize ? input_section->rawsize : input_section->size;
4863   if (!bfd_get_section_contents (input_bfd, input_section, data, 0, sz))
4864     goto error_return;
4865
4866   reloc_count = bfd_canonicalize_reloc (input_bfd,
4867                                         input_section,
4868                                         reloc_vector,
4869                                         symbols);
4870   if (reloc_count < 0)
4871     goto error_return;
4872
4873   if (reloc_count > 0)
4874     {
4875       arelent **parent;
4876       for (parent = reloc_vector; *parent != NULL; parent++)
4877         {
4878           char *error_message = NULL;
4879           bfd_reloc_status_type r =
4880             bfd_perform_relocation (input_bfd,
4881                                     *parent,
4882                                     data,
4883                                     input_section,
4884                                     relocatable ? abfd : NULL,
4885                                     &error_message);
4886
4887           if (relocatable)
4888             {
4889               asection *os = input_section->output_section;
4890
4891               /* A partial link, so keep the relocs.  */
4892               os->orelocation[os->reloc_count] = *parent;
4893               os->reloc_count++;
4894             }
4895
4896           if (r != bfd_reloc_ok)
4897             {
4898               switch (r)
4899                 {
4900                 case bfd_reloc_undefined:
4901                   if (!((*link_info->callbacks->undefined_symbol)
4902                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
4903                          input_bfd, input_section, (*parent)->address,
4904                          TRUE)))
4905                     goto error_return;
4906                   break;
4907                 case bfd_reloc_dangerous:
4908                   BFD_ASSERT (error_message != NULL);
4909                   if (!((*link_info->callbacks->reloc_dangerous)
4910                         (link_info, error_message, input_bfd, input_section,
4911                          (*parent)->address)))
4912                     goto error_return;
4913                   break;
4914                 case bfd_reloc_overflow:
4915                   if (!((*link_info->callbacks->reloc_overflow)
4916                         (link_info, NULL,
4917                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
4918                          (*parent)->howto->name, (*parent)->addend,
4919                          input_bfd, input_section, (*parent)->address)))
4920                     goto error_return;
4921                   break;
4922                 case bfd_reloc_outofrange:
4923                 default:
4924                   abort ();
4925                   break;
4926                 }
4927
4928             }
4929         }
4930     }
4931   if (reloc_vector != NULL)
4932     free (reloc_vector);
4933   return data;
4934
4935 error_return:
4936   if (reloc_vector != NULL)
4937     free (reloc_vector);
4938   return NULL;
4939 }