include/opcode/alpha.h

   1 /* alpha.h -- Header file for Alpha opcode table
   2    Copyright 1996, 1999, 2001, 2003, 2010 Free Software Foundation, Inc.
   3    Contributed by Richard Henderson <rth@tamu.edu>,
   4    patterned after the PPC opcode table written by Ian Lance Taylor.
   5
   6    This file is part of GDB, GAS, and the GNU binutils.
   7
   8    GDB, GAS, and the GNU binutils are free software; you can redistribute
   9    them and/or modify them under the terms of the GNU General Public
  10    License as published by the Free Software Foundation; either version 3,
  11    or (at your option) any later version.
  12
  13    GDB, GAS, and the GNU binutils are distributed in the hope that they
  14    will be useful, but WITHOUT ANY WARRANTY; without even the implied
  15    warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
  16    the GNU General Public License for more details.
  17
  18    You should have received a copy of the GNU General Public License
  19    along with this file; see the file COPYING3.  If not, write to the Free
  20    Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
  21    MA 02110-1301, USA.  */
  22
  23 #ifndef OPCODE_ALPHA_H
  24 #define OPCODE_ALPHA_H
  25
  26 /* The opcode table is an array of struct alpha_opcode.  */
  27
  28 struct alpha_opcode
  29 {
  30   /* The opcode name.  */
  31   const char *name;
  32
  33   /* The opcode itself.  Those bits which will be filled in with
  34      operands are zeroes.  */
  35   unsigned opcode;
  36
  37   /* The opcode mask.  This is used by the disassembler.  This is a
  38      mask containing ones indicating those bits which must match the
  39      opcode field, and zeroes indicating those bits which need not
  40      match (and are presumably filled in by operands).  */
  41   unsigned mask;
  42
  43   /* One bit flags for the opcode.  These are primarily used to
  44      indicate specific processors and environments support the
  45      instructions.  The defined values are listed below. */
  46   unsigned flags;
  47
  48   /* An array of operand codes.  Each code is an index into the
  49      operand table.  They appear in the order which the operands must
  50      appear in assembly code, and are terminated by a zero.  */
  51   unsigned char operands[4];
  52 };
  53
  54 /* The table itself is sorted by major opcode number, and is otherwise
  55    in the order in which the disassembler should consider
  56    instructions.  */
  57 extern const struct alpha_opcode alpha_opcodes[];
  58 extern const unsigned alpha_num_opcodes;
  59
  60 /* Values defined for the flags field of a struct alpha_opcode.  */
  61
  62 /* CPU Availability */
  63 #define AXP_OPCODE_BASE  0x0001  /* Base architecture -- all cpus.  */
  64 #define AXP_OPCODE_EV4   0x0002  /* EV4 specific PALcode insns.  */
  65 #define AXP_OPCODE_EV5   0x0004  /* EV5 specific PALcode insns.  */
  66 #define AXP_OPCODE_EV6   0x0008  /* EV6 specific PALcode insns.  */
  67 #define AXP_OPCODE_BWX   0x0100  /* Byte/word extension (amask bit 0).  */
  68 #define AXP_OPCODE_CIX   0x0200  /* "Count" extension (amask bit 1).  */
  69 #define AXP_OPCODE_MAX   0x0400  /* Multimedia extension (amask bit 8).  */
  70
  71 #define AXP_OPCODE_NOPAL (~(AXP_OPCODE_EV4|AXP_OPCODE_EV5|AXP_OPCODE_EV6))
  72
  73 /* A macro to extract the major opcode from an instruction.  */
  74 #define AXP_OP(i)       (((i) >> 26) & 0x3F)
  75
  76 /* The total number of major opcodes. */
  77 #define AXP_NOPS        0x40
  78
  79 \f
  80 /* The operands table is an array of struct alpha_operand.  */
  81
  82 struct alpha_operand
  83 {
  84   /* The number of bits in the operand.  */
  85   unsigned int bits : 5;
  86
  87   /* How far the operand is left shifted in the instruction.  */
  88   unsigned int shift : 5;
  89
  90   /* The default relocation type for this operand.  */
  91   signed int default_reloc : 16;
  92
  93   /* One bit syntax flags.  */
  94   unsigned int flags : 16;
  95
  96   /* Insertion function.  This is used by the assembler.  To insert an
  97      operand value into an instruction, check this field.
  98
  99      If it is NULL, execute
 100          i |= (op & ((1 << o->bits) - 1)) << o->shift;
 101      (i is the instruction which we are filling in, o is a pointer to
 102      this structure, and op is the opcode value; this assumes twos
 103      complement arithmetic).
 104
 105      If this field is not NULL, then simply call it with the
 106      instruction and the operand value.  It will return the new value
 107      of the instruction.  If the ERRMSG argument is not NULL, then if
 108      the operand value is illegal, *ERRMSG will be set to a warning
 109      string (the operand will be inserted in any case).  If the
 110      operand value is legal, *ERRMSG will be unchanged (most operands
 111      can accept any value).  */
 112   unsigned (*insert) (unsigned instruction, int op, const char **errmsg);
 113
 114   /* Extraction function.  This is used by the disassembler.  To
 115      extract this operand type from an instruction, check this field.
 116
 117      If it is NULL, compute
 118          op = ((i) >> o->shift) & ((1 << o->bits) - 1);
 119          if ((o->flags & AXP_OPERAND_SIGNED) != 0
 120              && (op & (1 << (o->bits - 1))) != 0)
 121            op -= 1 << o->bits;
 122      (i is the instruction, o is a pointer to this structure, and op
 123      is the result; this assumes twos complement arithmetic).
 124
 125      If this field is not NULL, then simply call it with the
 126      instruction value.  It will return the value of the operand.  If
 127      the INVALID argument is not NULL, *INVALID will be set to
 128      non-zero if this operand type can not actually be extracted from
 129      this operand (i.e., the instruction does not match).  If the
 130      operand is valid, *INVALID will not be changed.  */
 131   int (*extract) (unsigned instruction, int *invalid);
 132 };
 133
 134 /* Elements in the table are retrieved by indexing with values from
 135    the operands field of the alpha_opcodes table.  */
 136
 137 extern const struct alpha_operand alpha_operands[];
 138 extern const unsigned alpha_num_operands;
 139
 140 /* Values defined for the flags field of a struct alpha_operand.  */
 141
 142 /* Mask for selecting the type for typecheck purposes */
 143 #define AXP_OPERAND_TYPECHECK_MASK                                      \
 144   (AXP_OPERAND_PARENS | AXP_OPERAND_COMMA | AXP_OPERAND_IR |            \
 145    AXP_OPERAND_FPR | AXP_OPERAND_RELATIVE | AXP_OPERAND_SIGNED |        \
 146    AXP_OPERAND_UNSIGNED)
 147
 148 /* This operand does not actually exist in the assembler input.  This
 149    is used to support extended mnemonics, for which two operands fields
 150    are identical.  The assembler should call the insert function with
 151    any op value.  The disassembler should call the extract function,
 152    ignore the return value, and check the value placed in the invalid
 153    argument.  */
 154 #define AXP_OPERAND_FAKE        01
 155
 156 /* The operand should be wrapped in parentheses rather than separated
 157    from the previous by a comma.  This is used for the load and store
 158    instructions which want their operands to look like "Ra,disp(Rb)".  */
 159 #define AXP_OPERAND_PARENS      02
 160
 161 /* Used in combination with PARENS, this supresses the supression of
 162    the comma.  This is used for "jmp Ra,(Rb),hint".  */
 163 #define AXP_OPERAND_COMMA       04
 164
 165 /* This operand names an integer register.  */
 166 #define AXP_OPERAND_IR          010
 167
 168 /* This operand names a floating point register.  */
 169 #define AXP_OPERAND_FPR         020
 170
 171 /* This operand is a relative branch displacement.  The disassembler
 172    prints these symbolically if possible.  */
 173 #define AXP_OPERAND_RELATIVE    040
 174
 175 /* This operand takes signed values.  */
 176 #define AXP_OPERAND_SIGNED      0100
 177
 178 /* This operand takes unsigned values.  This exists primarily so that
 179    a flags value of 0 can be treated as end-of-arguments.  */
 180 #define AXP_OPERAND_UNSIGNED    0200
 181
 182 /* Supress overflow detection on this field.  This is used for hints. */
 183 #define AXP_OPERAND_NOOVERFLOW  0400
 184
 185 /* Mask for optional argument default value.  */
 186 #define AXP_OPERAND_OPTIONAL_MASK 07000
 187
 188 /* This operand defaults to zero.  This is used for jump hints.  */
 189 #define AXP_OPERAND_DEFAULT_ZERO 01000
 190
 191 /* This operand should default to the first (real) operand and is used
 192    in conjunction with AXP_OPERAND_OPTIONAL.  This allows
 193    "and $0,3,$0" to be written as "and $0,3", etc.  I don't like
 194    it, but it's what DEC does.  */
 195 #define AXP_OPERAND_DEFAULT_FIRST 02000
 196
 197 /* Similarly, this operand should default to the second (real) operand.
 198    This allows "negl $0" instead of "negl $0,$0".  */
 199 #define AXP_OPERAND_DEFAULT_SECOND 04000
 200
 201 \f
 202 /* Register common names */
 203
 204 #define AXP_REG_V0      0
 205 #define AXP_REG_T0      1
 206 #define AXP_REG_T1      2
 207 #define AXP_REG_T2      3
 208 #define AXP_REG_T3      4
 209 #define AXP_REG_T4      5
 210 #define AXP_REG_T5      6
 211 #define AXP_REG_T6      7
 212 #define AXP_REG_T7      8
 213 #define AXP_REG_S0      9
 214 #define AXP_REG_S1      10
 215 #define AXP_REG_S2      11
 216 #define AXP_REG_S3      12
 217 #define AXP_REG_S4      13
 218 #define AXP_REG_S5      14
 219 #define AXP_REG_FP      15
 220 #define AXP_REG_A0      16
 221 #define AXP_REG_A1      17
 222 #define AXP_REG_A2      18
 223 #define AXP_REG_A3      19
 224 #define AXP_REG_A4      20
 225 #define AXP_REG_A5      21
 226 #define AXP_REG_T8      22
 227 #define AXP_REG_T9      23
 228 #define AXP_REG_T10     24
 229 #define AXP_REG_T11     25
 230 #define AXP_REG_RA      26
 231 #define AXP_REG_PV      27
 232 #define AXP_REG_T12     27
 233 #define AXP_REG_AT      28
 234 #define AXP_REG_GP      29
 235 #define AXP_REG_SP      30
 236 #define AXP_REG_ZERO    31
 237
 238 #endif /* OPCODE_ALPHA_H */