| blob | 1ace2dca0566f3a800cefeae294461912f74309e |
1 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
2 # 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
3 #
4 # This file is free software; you can redistribute it and/or modify it
5 # under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 2 of the License, or
7 # (at your option) any later version.
8 #
9 # This program is distributed in the hope that it will be useful, but
10 # WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # General Public License for more details.
13 #
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 ##############################################################################
19 ### WARNING: this file contains embedded tabs. Do not run untabify on this file.
21 AC_INIT(move-if-change)
22 AC_PREREQ(2.13)
23 AC_CANONICAL_SYSTEM
24 AC_ARG_PROGRAM
26 sinclude(config/acx.m4)
28 ### we might need to use some other shell than /bin/sh for running subshells
29 ### If we are on Windows, search for the shell. This will permit people
30 ### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
31 ### without also having to set CONFIG_SHELL. This code will work when
32 ### using bash, which sets OSTYPE.
33 case "${OSTYPE}" in
34 *win32*)
35 if test x${CONFIG_SHELL} = x ; then
36 if test ! -f /bin/sh ; then
37 if test x${SHELL} != x && test -f ${SHELL} ; then
38 CONFIG_SHELL=${SHELL}
39 export CONFIG_SHELL
40 else
41 for prog in sh sh.exe bash bash.exe; do
42 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
43 for dir in $PATH; do
44 test -z "$dir" && dir=.
45 if test -f $dir/$prog; then
46 CONFIG_SHELL=$dir/$prog
47 export CONFIG_SHELL
48 break
49 fi
50 done
51 IFS="$save_ifs"
52 test -n "${CONFIG_SHELL}" && break
53 done
54 fi
55 fi
56 fi
57 ;;
58 esac
60 config_shell=${CONFIG_SHELL-/bin/sh}
62 progname=$0
63 # if PWD already has a value, it is probably wrong.
64 if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
66 # Export original configure arguments for use by sub-configures.
67 TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
68 AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
70 moveifchange=${srcdir}/move-if-change
72 # Set srcdir to "." if that's what it is.
73 # This is important for multilib support.
74 pwd=`${PWDCMD-pwd}`
75 srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
76 if test "${pwd}" = "${srcpwd}" ; then
77 srcdir=.
78 fi
80 topsrcdir=$srcpwd
82 extra_host_args=
83 # Define the trigger file to make sure configure will re-run whenever
84 # the gcc version number changes.
85 if test "${with_gcc_version_trigger+set}" = set ; then
86 gcc_version_trigger="$with_gcc_version_trigger"
87 gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
88 else
89 # If gcc's sources are available, define the trigger file.
90 if test -f ${topsrcdir}/gcc/version.c ; then
91 gcc_version_trigger=${topsrcdir}/gcc/version.c
92 gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
93 case "$ac_configure_args" in
94 *--with-gcc-version-trigger=$gcc_version_trigger* )
95 ;;
96 * )
97 # Add to all subconfigure arguments: build, host, and target.
98 ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
99 ;;
100 esac
101 fi
102 fi
104 ### To add a new directory to the tree, first choose whether it is a target
105 ### or a host dependent tool. Then put it into the appropriate list
106 ### (library or tools, host or target), doing a dependency sort.
108 # Subdirs will be configured in the order listed in build_configdirs,
109 # configdirs, or target_configdirs; see the serialization section below.
111 # Dependency sorting is only needed when *configuration* must be done in
112 # a particular order. In all cases a dependency should be specified in
113 # the Makefile, whether or not it's implicitly specified here.
115 # Double entries in build_configdirs, configdirs, or target_configdirs may
116 # cause circular dependencies and break everything horribly.
118 # these libraries are used by various programs built for the host environment
119 #
120 host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib"
122 # these tools are built for the host environment
123 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
124 # know that we are building the simulator.
125 # binutils, gas and ld appear in that order because it makes sense to run
126 # "make check" in that particular order.
127 host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
129 # libgcj represents the runtime libraries only used by gcj.
130 libgcj="target-libffi \
131 target-boehm-gc \
132 target-zlib \
133 target-qthreads \
134 target-libjava"
136 # these libraries are built for the target environment, and are built after
137 # the host libraries and the host tools (which may be a cross compiler)
138 #
139 target_libraries="target-libiberty \
140 target-libgloss \
141 target-newlib \
142 target-libstdc++-v3 \
143 target-libf2c \
144 ${libgcj} \
145 target-libobjc"
147 # these tools are built using the target libraries, and are intended to
148 # run only in the target environment
149 #
150 # note: any program that *uses* libraries that are in the "target_libraries"
151 # list belongs in this list. those programs are also very likely
152 # candidates for the "native_only" list which follows
153 #
154 target_tools="target-examples target-groff target-gperf target-rda"
156 ################################################################################
158 ## All tools belong in one of the four categories, and are assigned above
159 ## We assign ${configdirs} this way to remove all embedded newlines. This
160 ## is important because configure will choke if they ever get through.
161 ## ${configdirs} is directories we build using the host tools.
162 ## ${target_configdirs} is directories we build using the target tools.
163 #
164 configdirs=`echo ${host_libs} ${host_tools}`
165 target_configdirs=`echo ${target_libraries} ${target_tools}`
167 # Only make build modules if build != host.
168 # This should be done more generally, but at the moment it doesn't matter.
169 if test ${host_alias} != ${build_alias} ; then
170 # This is the only build module.
171 build_modules=libiberty
172 else
173 build_modules=
174 fi
177 ################################################################################
179 srcname="gnu development package"
181 # This gets set non-empty for some net releases of packages.
182 appdirs=""
184 # Define is_cross_compiler to save on calls to 'test'.
185 is_cross_compiler=
186 if test x"${host}" = x"${target}" ; then
187 is_cross_compiler=no
188 else
189 is_cross_compiler=yes
190 fi
192 # Find the build and target subdirs.
193 GCC_TOPLEV_SUBDIRS
195 if test ! -d ${target_subdir} ; then
196 if mkdir ${target_subdir} ; then true
197 else
198 echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2
199 exit 1
200 fi
201 fi
203 if test x"${build_alias}" != x"${host}" ; then
204 if test ! -d ${build_subdir} ; then
205 if mkdir ${build_subdir} ; then true
206 else
207 echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2
208 exit 1
209 fi
210 fi
211 fi
213 # Skipdirs are removed silently.
214 skipdirs=
215 # Noconfigdirs are removed loudly.
216 noconfigdirs=""
218 use_gnu_ld=
219 # Make sure we don't let GNU ld be added if we didn't want it.
220 if test x$with_gnu_ld = xno ; then
221 use_gnu_ld=no
222 noconfigdirs="$noconfigdirs ld"
223 fi
225 use_gnu_as=
226 # Make sure we don't let GNU as be added if we didn't want it.
227 if test x$with_gnu_as = xno ; then
228 use_gnu_as=no
229 noconfigdirs="$noconfigdirs gas"
230 fi
232 # some tools are so dependent upon X11 that if we're not building with X,
233 # it's not even worth trying to configure, much less build, that tool.
235 case ${with_x} in
236 yes | "") ;; # the default value for this tree is that X11 is available
237 no)
238 skipdirs="${skipdirs} tk tix itcl libgui"
239 # We won't be able to build gdbtk without X.
240 enable_gdbtk=no
241 ;;
242 *) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
243 esac
245 # Some tools are only suitable for building in a "native" situation.
246 # Remove these if host!=target.
247 native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
249 # Similarly, some are only suitable for cross toolchains.
250 # Remove these if host=target.
251 cross_only="target-libgloss target-newlib target-opcodes"
253 case $is_cross_compiler in
254 no) skipdirs="${skipdirs} ${cross_only}" ;;
255 yes) skipdirs="${skipdirs} ${native_only}" ;;
256 esac
258 # If both --with-headers and --with-libs are specified, default to
259 # --without-newlib.
260 if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
261 if test x"${with_newlib}" = x ; then
262 with_newlib=no
263 fi
264 fi
266 # Recognize --with-newlib/--without-newlib.
267 case ${with_newlib} in
268 no) skipdirs="${skipdirs} target-newlib" ;;
269 yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
270 esac
272 # Configure extra directories which are host specific
274 case "${host}" in
275 *-cygwin*)
276 configdirs="$configdirs libtermcap" ;;
277 esac
279 # Remove more programs from consideration, based on the host or
280 # target this usually means that a port of the program doesn't
281 # exist yet.
283 case "${host}" in
284 hppa*64*-*-*)
285 noconfigdirs="$noconfigdirs byacc"
286 ;;
287 i[[3456789]]86-*-vsta)
288 noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
289 ;;
290 i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
291 noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
292 ;;
293 i[[3456789]]86-*-mingw32*)
294 # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
295 noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
296 ;;
297 i[[3456789]]86-*-beos*)
298 noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
299 ;;
300 *-*-cygwin*)
301 noconfigdirs="autoconf automake send-pr rcs guile perl"
302 ;;
303 *-*-netbsd*)
304 noconfigdirs="rcs"
305 ;;
306 ppc*-*-pe)
307 noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
308 ;;
309 powerpc-*-beos*)
310 noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
311 ;;
312 *-*-darwin*)
313 noconfigdirs="$noconfigdirs tk itcl tix libgui"
314 ;;
315 esac
317 # Save it here so that, even in case of --enable-libgcj, if the Java
318 # front-end isn't enabled, we still get libgcj disabled.
319 libgcj_saved=$libgcj
320 case $enable_libgcj in
321 yes)
322 # If we reset it here, it won't get added to noconfigdirs in the
323 # target-specific build rules, so it will be forcibly enabled
324 # (unless the Java language itself isn't enabled).
325 libgcj=
326 ;;
327 no)
328 # Make sure we get it printed in the list of not supported target libs.
329 noconfigdirs="$noconfigdirs ${libgcj}"
330 ;;
331 esac
333 case "${target}" in
334 *-*-chorusos)
335 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
336 ;;
337 *-*-darwin*)
338 noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
339 noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
340 ;;
341 *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
342 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
343 ;;
344 *-*-kaos*)
345 # Remove unsupported stuff on all kaOS configurations.
346 skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-libf2c target-librx"
347 skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
348 skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
349 noconfigdirs="$noconfigdirs target-libgloss"
350 ;;
351 *-*-netbsd*)
352 # Skip some stuff on all NetBSD configurations.
353 noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
355 # Skip some stuff that's unsupported on some NetBSD configurations.
356 case "${target}" in
357 i*86-*-netbsdelf*) ;;
358 arm*-*-netbsdelf*) ;;
359 *)
360 noconfigdirs="$noconfigdirs ${libgcj}"
361 ;;
362 esac
363 ;;
364 *-*-netware)
365 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
366 ;;
367 *-*-rtems*)
368 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
369 case ${target} in
370 h8300*-*-* | h8500-*-*)
371 noconfigdirs="$noconfigdirs target-libf2c"
372 ;;
373 *) ;;
374 esac
375 ;;
376 *-*-vxworks*)
377 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
378 ;;
379 alpha*-dec-osf*)
380 # ld works, but does not support shared libraries.
381 # newlib is not 64 bit ready. I'm not sure about fileutils.
382 # gas doesn't generate exception information.
383 noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
384 ;;
385 alpha*-*-*vms*)
386 noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
387 ;;
388 alpha*-*-linux*)
389 # newlib is not 64 bit ready
390 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
391 ;;
392 alpha*-*-freebsd*)
393 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
394 ;;
395 alpha*-*-*)
396 # newlib is not 64 bit ready
397 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
398 ;;
399 sh-*-linux*)
400 noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
401 ;;
402 sh*-*-pe|mips*-*-pe|*arm-wince-pe)
403 noconfigdirs="$noconfigdirs ${libgcj}"
404 noconfigdirs="$noconfigdirs target-examples"
405 noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
406 noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
407 noconfigdirs="$noconfigdirs expect dejagnu"
408 # the C++ libraries don't build on top of CE's C libraries
409 noconfigdirs="$noconfigdirs target-libstdc++-v3"
410 noconfigdirs="$noconfigdirs target-newlib"
411 case "${host}" in
412 *-*-cygwin*) ;; # keep gdb and readline
413 *) noconfigdirs="$noconfigdirs gdb readline"
414 ;;
415 esac
416 ;;
417 arc-*-*)
418 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
419 ;;
420 arm-*-coff | strongarm-*-coff | xscale-*-coff)
421 noconfigdirs="$noconfigdirs ${libgcj}"
422 ;;
423 arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
424 noconfigdirs="$noconfigdirs target-libffi target-qthreads"
425 ;;
426 arm-*-pe*)
427 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
428 ;;
429 arm-*-oabi*)
430 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
431 ;;
432 thumb-*-coff)
433 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
434 ;;
435 thumb-*-elf)
436 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
437 ;;
438 thumb-*-oabi)
439 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
440 ;;
441 thumb-*-pe)
442 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
443 ;;
444 arm-*-riscix*)
445 noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
446 ;;
447 avr-*-*)
448 noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
449 ;;
450 c4x-*-* | tic4x-*-*)
451 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
452 ;;
453 c54x*-*-* | tic54x-*-*)
454 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
455 ;;
456 cris-*-*)
457 noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
458 ;;
459 d10v-*-*)
460 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
461 ;;
462 d30v-*-*)
463 noconfigdirs="$noconfigdirs ${libgcj} gdb"
464 ;;
465 fr30-*-elf*)
466 noconfigdirs="$noconfigdirs ${libgcj} gdb"
467 ;;
468 frv-*-*)
469 noconfigdirs="$noconfigdirs ${libgcj}"
470 ;;
471 h8300*-*-*)
472 noconfigdirs="$noconfigdirs target-libgloss ${libgcj} target-libf2c"
473 ;;
474 h8500-*-*)
475 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
476 ;;
477 hppa*64*-*-linux* | parisc*64*-*-linux*)
478 # In this case, it's because the hppa64-linux target is for
479 # the kernel only at this point and has no libc, and thus no
480 # headers, crt*.o, etc., all of which are needed by these.
481 noconfigdirs="$noconfigdirs target-zlib"
482 ;;
483 hppa*-*-*elf* | \
484 parisc*-*-linux* | hppa*-*-linux* | \
485 hppa*-*-lites* | \
486 hppa*-*-openbsd* | \
487 hppa*64*-*-*)
488 noconfigdirs="$noconfigdirs ${libgcj}"
489 # Do configure ld/binutils/gas for this case.
490 ;;
491 hppa*-*-*)
492 # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
493 # build on HP-UX 10.20.
494 noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
495 ;;
496 i960-*-*)
497 noconfigdirs="$noconfigdirs ${libgcj} gdb"
498 ;;
499 ia64*-*-elf*)
500 # No gdb support yet.
501 noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
502 ;;
503 ia64*-**-hpux*)
504 # No gdb or ld support yet.
505 noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
506 ;;
507 i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
508 noconfigdirs="$noconfigdirs ${libgcj}"
509 ;;
510 i[[3456789]]86-*-freebsd*)
511 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
512 ;;
513 i[[3456789]]86-*-linux*)
514 # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
515 # not build java stuff by default.
516 case "${target}" in
517 *-*-*libc1*)
518 noconfigdirs="$noconfigdirs ${libgcj}";;
519 esac
521 # This section makes it possible to build newlib natively on linux.
522 # If we are using a cross compiler then don't configure newlib.
523 if test x${is_cross_compiler} != xno ; then
524 noconfigdirs="$noconfigdirs target-newlib"
525 fi
526 noconfigdirs="$noconfigdirs target-libgloss"
527 # If we are not using a cross compiler, do configure newlib.
528 # Note however, that newlib will only be configured in this situation
529 # if the --with-newlib option has been given, because otherwise
530 # 'target-newlib' will appear in skipdirs.
531 ;;
532 i[[3456789]]86-*-mingw32*)
533 target_configdirs="$target_configdirs target-mingw"
534 noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
536 # Can't build gdb for mingw32 if not native.
537 case "${host}" in
538 i[[3456789]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
539 *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
540 ;;
541 esac
542 ;;
543 *-*-cygwin*)
544 target_configdirs="$target_configdirs target-libtermcap target-winsup"
545 noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
546 # always build newlib.
547 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
549 # Can't build gdb for Cygwin if not native.
550 case "${host}" in
551 *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
552 *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
553 ;;
554 esac
555 ;;
556 i[[3456789]]86-*-pe)
557 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
558 ;;
559 i[[3456789]]86-*-sco3.2v5*)
560 # The linker does not yet know about weak symbols in COFF,
561 # and is not configured to handle mixed ELF and COFF.
562 noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
563 ;;
564 i[[3456789]]86-*-sco*)
565 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
566 ;;
567 i[[3456789]]86-*-solaris2*)
568 noconfigdirs="$noconfigdirs target-libgloss"
569 ;;
570 i[[3456789]]86-*-sysv4*)
571 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
572 ;;
573 i[[3456789]]86-*-beos*)
574 noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
575 ;;
576 m32r-*-*)
577 noconfigdirs="$noconfigdirs ${libgcj} gdb"
578 ;;
579 m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
580 noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
581 ;;
582 m68k-*-elf*)
583 noconfigdirs="$noconfigdirs ${libgcj}"
584 ;;
585 m68k-*-coff*)
586 noconfigdirs="$noconfigdirs ${libgcj}"
587 ;;
588 mcore-*-pe*)
589 # The EPOC C++ environment does not support exceptions or rtti,
590 # and so building libstdc++-v3 tends not to always work.
591 noconfigdirs="$noconfigdirs target-libstdc++-v3"
592 ;;
593 mmix-*-*)
594 noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
595 ;;
596 mn10200-*-*)
597 noconfigdirs="$noconfigdirs ${libgcj}"
598 ;;
599 mn10300-*-*)
600 noconfigdirs="$noconfigdirs ${libgcj}"
601 ;;
602 powerpc-*-aix*)
603 # copied from rs6000-*-* entry
604 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
605 ;;
606 powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
607 target_configdirs="$target_configdirs target-winsup"
608 noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
609 # always build newlib.
610 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
611 ;;
612 # This is temporary until we can link against shared libraries
613 powerpcle-*-solaris*)
614 noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
615 ;;
616 powerpc-*-beos*)
617 noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
618 ;;
619 powerpc-*-eabi)
620 noconfigdirs="$noconfigdirs ${libgcj}"
621 ;;
622 rs6000-*-lynxos*)
623 noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
624 ;;
625 rs6000-*-aix*)
626 noconfigdirs="$noconfigdirs gprof ${libgcj}"
627 ;;
628 rs6000-*-*)
629 noconfigdirs="$noconfigdirs gprof ${libgcj}"
630 ;;
631 m68k-apollo-*)
632 noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
633 ;;
634 mips*-*-irix5*)
635 # The GNU linker does not support shared libraries.
636 noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
637 ;;
638 mips*-*-irix6*)
639 # Linking libjava exceeds command-line length limits on at least
640 # IRIX 6.2, but not on IRIX 6.5.
641 # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
642 # <oldham@codesourcery.com>
643 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
644 ;;
645 mips*-dec-bsd*)
646 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
647 ;;
648 mips*-*-bsd*)
649 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
650 ;;
651 mipstx39-*-*)
652 noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
653 ;;
654 mips*-*-linux*)
655 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
656 ;;
657 mips*-*-*)
658 noconfigdirs="$noconfigdirs gprof ${libgcj}"
659 ;;
660 romp-*-*)
661 noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
662 ;;
663 sh-*-*)
664 case "${host}" in
665 i[[3456789]]86-*-vsta) ;; # don't add gprof back in
666 i[[3456789]]86-*-go32*) ;; # don't add gprof back in
667 i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
668 *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
669 esac
670 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
671 ;;
672 sh64-*-*)
673 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
674 ;;
675 sparc-*-elf*)
676 noconfigdirs="$noconfigdirs ${libgcj}"
677 ;;
678 sparc64-*-elf*)
679 noconfigdirs="$noconfigdirs ${libgcj}"
680 ;;
681 sparclite-*-*)
682 noconfigdirs="$noconfigdirs ${libgcj}"
683 ;;
684 sparc-*-sunos4*)
685 noconfigdirs="$noconfigdirs ${libgcj}"
686 if test x${is_cross_compiler} != xno ; then
687 noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
688 else
689 use_gnu_ld=no
690 fi
691 ;;
692 sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
693 ;;
694 v810-*-*)
695 noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
696 ;;
697 v850-*-*)
698 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
699 ;;
700 v850e-*-*)
701 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
702 ;;
703 v850ea-*-*)
704 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
705 ;;
706 vax-*-vms)
707 noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
708 ;;
709 vax-*-*)
710 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
711 ;;
712 ip2k-*-*)
713 noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
714 ;;
715 *-*-linux*)
716 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
717 ;;
718 *-*-lynxos*)
719 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
720 ;;
721 *-*-*)
722 noconfigdirs="$noconfigdirs ${libgcj}"
723 ;;
724 esac
726 # If we aren't building newlib, then don't build libgloss, since libgloss
727 # depends upon some newlib header files.
728 case "${noconfigdirs}" in
729 *target-libgloss*) ;;
730 *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
731 esac
733 # Figure out what language subdirectories are present.
734 # Look if the user specified --enable-languages="..."; if not, use
735 # the environment variable $LANGUAGES if defined. $LANGUAGES might
736 # go away some day.
737 # NB: embedded tabs in this IF block -- do not untabify
738 if test x"${enable_languages+set}" != xset; then
739 if test x"${LANGUAGES+set}" = xset; then
740 enable_languages="${LANGUAGES}"
741 echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
742 else
743 enable_languages=all
744 fi
745 else
746 if test x"${enable_languages}" = x ||
747 test x"${enable_languages}" = xyes;
748 then
749 echo configure.in: --enable-languages needs at least one language argument 1>&2
750 exit 1
751 fi
752 fi
753 enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'`
755 # First scan to see if an enabled language requires some other language.
756 # We assume that a given config-lang.in will list all the language
757 # front ends it requires, even if some are required indirectly.
758 for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
759 case ${lang_frag} in
760 ..) ;;
761 # The odd quoting in the next line works around
762 # an apparent bug in bash 1.12 on linux.
763 ${srcdir}/gcc/[[*]]/config-lang.in) ;;
764 *)
765 # From the config-lang.in, get $language, $lang_requires
766 language=
767 lang_requires=
768 . ${lang_frag}
769 for other in ${lang_requires} ; do
770 case ,${enable_languages}, in
771 *,$other,*) ;;
772 *,all,*) ;;
773 *,$language,*)
774 echo " \`$other' language required by \`$language'; enabling" 1>&2
775 enable_languages="${enable_languages},${other}"
776 ;;
777 esac
778 done
779 ;;
780 esac
781 done
783 for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
784 case ${lang_frag} in
785 ..) ;;
786 # The odd quoting in the next line works around
787 # an apparent bug in bash 1.12 on linux.
788 ${srcdir}/gcc/[[*]]/config-lang.in) ;;
789 *)
790 # From the config-lang.in, get $language, $target_libs,
791 # $lang_dirs, and $build_by_default
792 language=
793 target_libs=
794 lang_dirs=
795 build_by_default=
796 . ${lang_frag}
797 if test "x$language" = x ; then
798 echo "${lang_frag} doesn't set \$language." 1>&2
799 exit 1
800 fi
801 case ,${enable_languages}, in
802 *,${language},*)
803 # Language was explicitly selected; include it.
804 add_this_lang=yes
805 ;;
806 *,all,*)
807 # 'all' was selected; include 'default' languages.
808 case ${build_by_default} in
809 no) add_this_lang=no ;;
810 *) add_this_lang=yes ;;
811 esac
812 ;;
813 *) add_this_lang=no ;;
814 esac
815 case ${add_this_lang} in
816 no)
817 # Remove language-dependent dirs.
818 eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
819 ;;
820 esac
821 ;;
822 esac
823 done
825 # Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
826 # $target_configdirs.
827 # If we have the source for $noconfigdirs entries, add them to $notsupp.
829 notsupp=""
830 for dir in . $skipdirs $noconfigdirs ; do
831 dirname=`echo $dir | sed -e s/target-//g`
832 if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
833 configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
834 if test -r $srcdir/$dirname/configure ; then
835 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
836 true
837 else
838 notsupp="$notsupp $dir"
839 fi
840 fi
841 fi
842 if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
843 target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
844 if test -r $srcdir/$dirname/configure ; then
845 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
846 true
847 else
848 notsupp="$notsupp $dir"
849 fi
850 fi
851 fi
852 done
854 # Sometimes the tools are distributed with libiberty but with no other
855 # libraries. In that case, we don't want to build target-libiberty.
856 if test -n "${target_configdirs}" ; then
857 others=
858 for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
859 if test "$i" != "libiberty" ; then
860 if test -r $srcdir/$i/configure ; then
861 others=yes;
862 break;
863 fi
864 fi
865 done
866 if test -z "${others}" ; then
867 target_configdirs=
868 fi
869 fi
871 # Quietly strip out all directories which aren't configurable in this tree.
872 # This relies on all configurable subdirectories being autoconfiscated, which
873 # is now the case.
874 configdirs_all="$configdirs"
875 configdirs=
876 for i in ${configdirs_all} ; do
877 if test -f ${srcdir}/$i/configure ; then
878 configdirs="${configdirs} $i"
879 fi
880 done
881 target_configdirs_all="$target_configdirs"
882 target_configdirs=
883 for i in ${target_configdirs_all} ; do
884 j=`echo $i | sed -e s/target-//g`
885 if test -f ${srcdir}/$j/configure ; then
886 target_configdirs="${target_configdirs} $i"
887 fi
888 done
890 # Produce a warning message for the subdirs we can't configure.
891 # This isn't especially interesting in the Cygnus tree, but in the individual
892 # FSF releases, it's important to let people know when their machine isn't
893 # supported by the one or two programs in a package.
895 if test -n "${notsupp}" && test -z "${norecursion}" ; then
896 # If $appdirs is non-empty, at least one of those directories must still
897 # be configured, or we error out. (E.g., if the gas release supports a
898 # specified target in some subdirs but not the gas subdir, we shouldn't
899 # pretend that all is well.)
900 if test -n "$appdirs" ; then
901 for dir in $appdirs ; do
902 if test -r $dir/Makefile.in ; then
903 if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
904 appdirs=""
905 break
906 fi
907 if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
908 appdirs=""
909 break
910 fi
911 fi
912 done
913 if test -n "$appdirs" ; then
914 echo "*** This configuration is not supported by this package." 1>&2
915 exit 1
916 fi
917 fi
918 # Okay, some application will build, or we don't care to check. Still
919 # notify of subdirs not getting built.
920 echo "*** This configuration is not supported in the following subdirectories:" 1>&2
921 echo " ${notsupp}" 1>&2
922 echo " (Any other directories should still work fine.)" 1>&2
923 fi
925 case "$host" in
926 *msdosdjgpp*)
927 enable_gdbtk=no ;;
928 esac
930 copy_dirs=
932 # Handle --with-headers=XXX. If the value is not "yes", the contents of
933 # the named directory are copied to $(tooldir)/sys-include.
934 if test x"${with_headers}" != x ; then
935 if test x${is_cross_compiler} = xno ; then
936 echo 1>&2 '***' --with-headers is only supported when cross compiling
937 exit 1
938 fi
939 if test x"${with_headers}" != xyes ; then
940 case "${exec_prefixoption}" in
941 "") x=${prefix} ;;
942 *) x=${exec_prefix} ;;
943 esac
944 copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
945 fi
946 fi
948 # Handle --with-libs=XXX. If the value is not "yes", the contents of
949 # the name directories are copied to $(tooldir)/lib. Multiple directories
950 # are permitted.
951 if test x"${with_libs}" != x ; then
952 if test x${is_cross_compiler} = xno ; then
953 echo 1>&2 '***' --with-libs is only supported when cross compiling
954 exit 1
955 fi
956 if test x"${with_libs}" != xyes ; then
957 # Copy the libraries in reverse order, so that files in the first named
958 # library override files in subsequent libraries.
959 case "${exec_prefixoption}" in
960 "") x=${prefix} ;;
961 *) x=${exec_prefix} ;;
962 esac
963 for l in ${with_libs}; do
964 copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
965 done
966 fi
967 fi
969 # Handle ${copy_dirs}
970 set fnord ${copy_dirs}
971 shift
972 while test $# != 0 ; do
973 if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
974 :
975 else
976 echo Copying $1 to $2
978 # Use the install script to create the directory and all required
979 # parent directories.
980 if test -d $2 ; then
981 :
982 else
983 echo >config.temp
984 ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
985 fi
987 # Copy the directory, assuming we have tar.
988 # FIXME: Should we use B in the second tar? Not all systems support it.
989 (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
991 # It is the responsibility of the user to correctly adjust all
992 # symlinks. If somebody can figure out how to handle them correctly
993 # here, feel free to add the code.
995 echo $1 > $2/COPIED
996 fi
997 shift; shift
998 done
1000 # Work in distributions that contain no compiler tools, like Autoconf.
1001 tentative_cc=""
1002 host_makefile_frag=/dev/null
1003 if test -d ${srcdir}/config ; then
1004 case "${host}" in
1005 m68k-hp-hpux*)
1006 # Avoid "too much defining" errors from HPUX compiler.
1007 tentative_cc="cc -Wp,-H256000"
1008 # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
1009 # If it's HP/UX ar, this should be harmless.
1010 RANLIB="ar ts"
1011 ;;
1012 m68k-apollo-sysv*)
1013 tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
1014 ;;
1015 m68k-apollo-bsd*)
1016 #None of the Apollo compilers can compile gas or binutils. The preprocessor
1017 # chokes on bfd, the compiler won't let you assign integers to enums, and
1018 # other problems. Defining CC to gcc is a questionable way to say "don't use
1019 # the apollo compiler" (the preferred version of GCC could be called cc,
1020 # or whatever), but I'm not sure leaving CC as cc is any better...
1021 #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
1022 # Used to have BISON=yacc.
1023 tentative_cc=gcc
1024 ;;
1025 m88k-dg-dgux*)
1026 tentative_cc="gcc -Wall -ansi -D__using_DGUX"
1027 ;;
1028 m88k-harris-cxux*)
1029 # Under CX/UX, we want to tell the compiler to use ANSI mode.
1030 tentative_cc="cc -Xa"
1031 host_makefile_frag="config/mh-cxux"
1032 ;;
1033 m88k-motorola-sysv*)
1034 ;;
1035 mips*-dec-ultrix*)
1036 tentative_cc="cc -Wf,-XNg1000"
1037 host_makefile_frag="config/mh-decstation"
1038 ;;
1039 mips*-nec-sysv4*)
1040 # The C compiler on NEC MIPS SVR4 needs bigger tables.
1041 tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
1042 host_makefile_frag="config/mh-necv4"
1043 ;;
1044 mips*-sgi-irix4*)
1045 # Tell compiler to use K&R C. We can't compile under the SGI Ansi
1046 # environment. Also bump switch table size so that cp-parse will
1047 # compile. Bump string length limit so linker builds.
1048 tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
1049 ;;
1050 mips*-*-sysv4*)
1051 host_makefile_frag="config/mh-sysv4"
1052 ;;
1053 mips*-*-sysv*)
1054 # This is for a MIPS running RISC/os 4.52C.
1056 # This is needed for GDB, but needs to be in the top-level make because
1057 # if a library is compiled with the bsd headers and gets linked with the
1058 # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
1059 # a different size).
1060 # ptrace(2) apparently has problems in the BSD environment. No workaround is
1061 # known except to select the sysv environment. Could we use /proc instead?
1062 # These "sysv environments" and "bsd environments" often end up being a pain.
1063 #
1064 # This is not part of CFLAGS because perhaps not all C compilers have this
1065 # option.
1066 tentative_cc="cc -systype sysv"
1067 ;;
1068 i370-ibm-opened*)
1069 tentative_cc="c89"
1070 ;;
1071 i[[3456789]]86-*-sysv5*)
1072 host_makefile_frag="config/mh-sysv5"
1073 ;;
1074 i[[3456789]]86-*-dgux*)
1075 tentative_cc="gcc -Wall -ansi -D__using_DGUX"
1076 host_makefile_frag="config/mh-dgux386"
1077 ;;
1078 i[[3456789]]86-ncr-sysv4.3*)
1079 # The MetaWare compiler will generate a copyright message unless you
1080 # turn it off by adding the -Hnocopyr flag.
1081 tentative_cc="cc -Hnocopyr"
1082 ;;
1083 i[[3456789]]86-ncr-sysv4*)
1084 # for an NCR 3000 (i486/SVR4) system.
1085 # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
1086 # This compiler not only emits obnoxious copyright messages every time
1087 # you run it, but it chokes and dies on a whole bunch of GNU source
1088 # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
1089 tentative_cc="/usr/ccs/ATT/cc"
1090 host_makefile_frag="config/mh-ncr3000"
1091 ;;
1092 i[[3456789]]86-*-sco3.2v5*)
1093 ;;
1094 i[[3456789]]86-*-sco*)
1095 # The native C compiler botches some simple uses of const. Unfortunately,
1096 # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
1097 tentative_cc="cc -Dconst="
1098 host_makefile_frag="config/mh-sco"
1099 ;;
1100 i[[3456789]]86-*-udk*)
1101 host_makefile_frag="config/mh-sysv5"
1102 ;;
1103 i[[3456789]]86-*-solaris2*)
1104 host_makefile_frag="config/mh-sysv4"
1105 ;;
1106 i[[3456789]]86-*-msdosdjgpp*)
1107 host_makefile_frag="config/mh-djgpp"
1108 ;;
1109 *-cygwin*)
1110 host_makefile_frag="config/mh-cygwin"
1111 ;;
1112 *-mingw32*)
1113 host_makefile_frag="config/mh-mingw32"
1114 ;;
1115 *-interix*)
1116 host_makefile_frag="config/mh-interix"
1117 ;;
1118 vax-*-ultrix2*)
1119 # The old BSD pcc isn't up to compiling parts of gdb so use gcc
1120 tentative_cc=gcc
1121 ;;
1122 *-*-solaris2*)
1123 host_makefile_frag="config/mh-solaris"
1124 ;;
1125 m68k-sun-sunos*)
1126 # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
1127 # without overflowing the jump tables (-J says to use a 32 bit table)
1128 tentative_cc="cc -J"
1129 ;;
1130 *-hp-hpux*)
1131 tentative_cc="cc -Wp,-H256000"
1132 ;;
1133 *-*-hiux*)
1134 tentative_cc="cc -Wp,-H256000"
1135 ;;
1136 rs6000-*-lynxos*)
1137 # /bin/cc is less than useful for our purposes. Always use GCC
1138 tentative_cc="/usr/cygnus/progressive/bin/gcc"
1139 host_makefile_frag="config/mh-lynxrs6k"
1140 ;;
1141 *-*-lynxos*)
1142 # /bin/cc is less than useful for our purposes. Always use GCC
1143 tentative_cc="/bin/gcc"
1144 ;;
1145 *-*-sysv4*)
1146 host_makefile_frag="config/mh-sysv4"
1147 ;;
1148 esac
1149 fi
1151 extra_arflags_for_target=
1152 extra_nmflags_for_target=
1153 extra_ranlibflags_for_target=
1154 target_makefile_frag=/dev/null
1155 case "${target}" in
1156 i[[3456789]]86-*-netware*)
1157 target_makefile_frag="config/mt-netware"
1158 ;;
1159 powerpc-*-netware*)
1160 target_makefile_frag="config/mt-netware"
1161 ;;
1162 *-*-linux*)
1163 target_makefile_frag="config/mt-linux"
1164 ;;
1165 *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
1166 # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
1167 # commands to handle both 32-bit and 64-bit objects. These flags are
1168 # harmless if we're using GNU nm or ar.
1169 extra_arflags_for_target=" -X32_64"
1170 extra_nmflags_for_target=" -B -X32_64"
1171 ;;
1172 *-*-darwin*)
1173 # ranlib from Darwin requires the -c flag to look at common symbols.
1174 extra_ranlibflags_for_target=" -c"
1175 ;;
1176 mips*-*-pe | sh*-*-pe | *arm-wince-pe)
1177 target_makefile_frag="config/mt-wince"
1178 ;;
1179 esac
1181 alphaieee_frag=/dev/null
1182 case $target in
1183 alpha*-*-*)
1184 # This just makes sure to use the -mieee option to build target libs.
1185 # This should probably be set individually by each library.
1186 alphaieee_frag="config/mt-alphaieee"
1187 ;;
1188 esac
1190 # If --enable-target-optspace always use -Os instead of -O2 to build
1191 # the target libraries, similarly if it is not specified, use -Os
1192 # on selected platforms.
1193 ospace_frag=/dev/null
1194 case "${enable_target_optspace}:${target}" in
1195 yes:*)
1196 ospace_frag="config/mt-ospace"
1197 ;;
1198 :d30v-*)
1199 ospace_frag="config/mt-d30v"
1200 ;;
1201 :m32r-* | :d10v-* | :fr30-*)
1202 ospace_frag="config/mt-ospace"
1203 ;;
1204 no:* | :*)
1205 ;;
1206 *)
1207 echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
1208 ;;
1209 esac
1211 # Set with_gnu_as and with_gnu_ld as appropriate.
1212 #
1213 # This is done by determining whether or not the appropriate directory
1214 # is available, and by checking whether or not specific configurations
1215 # have requested that this magic not happen.
1216 #
1217 # The command line options always override the explicit settings in
1218 # configure.in, and the settings in configure.in override this magic.
1219 #
1220 # If the default for a toolchain is to use GNU as and ld, and you don't
1221 # want to do that, then you should use the --without-gnu-as and
1222 # --without-gnu-ld options for the configure script.
1224 if test x${use_gnu_as} = x &&
1225 echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
1226 with_gnu_as=yes
1227 extra_host_args="$extra_host_args --with-gnu-as"
1228 fi
1230 if test x${use_gnu_ld} = x &&
1231 echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
1232 with_gnu_ld=yes
1233 extra_host_args="$extra_host_args --with-gnu-ld"
1234 fi
1236 # If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
1237 # can detect this case.
1239 if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
1240 with_newlib=yes
1241 extra_host_args="$extra_host_args --with-newlib"
1242 fi
1245 # Default to using --with-stabs for certain targets.
1246 if test x${with_stabs} = x ; then
1247 case "${target}" in
1248 mips*-*-irix6*)
1249 ;;
1250 mips*-*-* | alpha*-*-osf*)
1251 with_stabs=yes;
1252 extra_host_args="${extra_host_args} --with-stabs"
1253 ;;
1254 esac
1255 fi
1257 # hpux11 in 64bit mode has libraries in a weird place. Arrange to find
1258 # them automatically.
1259 case "${host}" in
1260 hppa*64*-*-hpux11*)
1261 extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
1262 ;;
1263 esac
1265 # If we aren't going to be using gcc, see if we can extract a definition
1266 # of CC from the fragment.
1267 # Actually, use the 'pre-extracted' version above.
1268 if test -z "${CC}" && test "${build}" = "${host}" ; then
1269 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1270 found=
1271 for dir in $PATH; do
1272 test -z "$dir" && dir=.
1273 if test -f $dir/gcc; then
1274 found=yes
1275 break
1276 fi
1277 done
1278 IFS="$save_ifs"
1279 if test -z "${found}" && test -n "${tentative_cc}" ; then
1280 CC=$tentative_cc
1281 fi
1282 fi
1284 # Some systems (e.g., one of the i386-aix systems the gas testers are
1285 # using) don't handle "\$" correctly, so don't use it here.
1286 tooldir='${exec_prefix}'/${target_alias}
1287 build_tooldir=${tooldir}
1289 # Generate a default definition for YACC. This is used if the makefile can't
1290 # locate bison or byacc in objdir.
1292 for prog in 'bison -y' byacc yacc
1293 do
1294 set dummy $prog; tmp=$2
1295 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1296 for dir in $PATH; do
1297 test -z "$dir" && dir=.
1298 if test -f $dir/$tmp; then
1299 DEFAULT_YACC="$prog"
1300 break
1301 fi
1302 done
1303 IFS="$save_ifs"
1305 test -n "$DEFAULT_YACC" && break
1306 done
1308 # Generate a default definition for M4. This is used if the makefile can't
1309 # locate m4 in objdir.
1311 for prog in gm4 gnum4 m4
1312 do
1313 set dummy $prog; tmp=$2
1314 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1315 for dir in $PATH; do
1316 test -z "$dir" && dir=.
1317 if test -f $dir/$tmp; then
1318 DEFAULT_M4="$prog"
1319 break
1320 fi
1321 done
1322 IFS="$save_ifs"
1324 test -n "$DEFAULT_M4" && break
1325 done
1327 # Generate a default definition for LEX. This is used if the makefile can't
1328 # locate flex in objdir.
1330 for prog in flex lex
1331 do
1332 set dummy $prog; tmp=$2
1333 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1334 for dir in $PATH; do
1335 test -z "$dir" && dir=.
1336 if test -f $dir/$tmp; then
1337 DEFAULT_LEX="$prog"
1338 break
1339 fi
1340 done
1341 IFS="$save_ifs"
1343 test -n "$DEFAULT_LEX" && break
1344 done
1346 if test "${build}" != "${host}" ; then
1347 # If we are doing a Canadian Cross, in which the host and build systems
1348 # are not the same, we set reasonable default values for the tools.
1350 BISON=${BISON-bison}
1351 CC=${CC-${host_alias}-gcc}
1352 CFLAGS=${CFLAGS-"-g -O2"}
1353 CXX=${CXX-${host_alias}-c++}
1354 CXXFLAGS=${CXXFLAGS-"-g -O2"}
1355 CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
1356 CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
1357 CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
1358 GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
1359 GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
1360 BUILD_PREFIX=${build_alias}-
1361 BUILD_PREFIX_1=${build_alias}-
1362 MAKEINFO=${MAKEINFO-makeinfo}
1364 if test -z "${YACC}" ; then
1365 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1366 for dir in $PATH; do
1367 test -z "$dir" && dir=.
1368 if test -f $dir/bison; then
1369 YACC="bison -y"
1370 break
1371 fi
1372 if test -f $dir/byacc; then
1373 YACC=byacc
1374 break
1375 fi
1376 if test -f $dir/yacc; then
1377 YACC=yacc
1378 break
1379 fi
1380 done
1381 IFS="$save_ifs"
1382 if test -z "${YACC}" ; then
1383 YACC="bison -y"
1384 fi
1385 fi
1387 if test -z "${LEX}" ; then
1388 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1389 for dir in $PATH; do
1390 test -z "$dir" && dir=.
1391 if test -f $dir/flex; then
1392 LEX=flex
1393 break
1394 fi
1395 if test -f $dir/lex; then
1396 LEX=lex
1397 break
1398 fi
1399 done
1400 IFS="$save_ifs"
1401 LEX=${LEX-flex}
1402 fi
1404 else
1405 # Set reasonable default values for some tools even if not Canadian.
1406 # Of course, these are different reasonable default values, originally
1407 # specified directly in the Makefile.
1408 # We don't export, so that autoconf can do its job.
1409 # Note that all these settings are above the fragment inclusion point
1410 # in Makefile.in, so can still be overridden by fragments.
1411 # This is all going to change when we autoconfiscate...
1413 BISON="\$(USUAL_BISON)"
1414 CC_FOR_BUILD="\$(CC)"
1415 GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
1416 BUILD_PREFIX=
1417 BUILD_PREFIX_1=loser-
1418 MAKEINFO="\$(USUAL_MAKEINFO)"
1419 LEX="\$(USUAL_LEX)"
1420 YACC="\$(USUAL_YACC)"
1422 # If CC is still not set, try to get gcc.
1423 cc_prog_is_gcc=
1424 if test -z "${CC}" ; then
1425 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1426 for dir in $PATH; do
1427 test -z "$dir" && dir=.
1428 if test -f $dir/gcc; then
1429 CC="gcc"
1430 cc_prog_is_gcc=yes
1431 echo 'void f(){}' > conftest.c
1432 if test -z "`${CC} -g -c conftest.c 2>&1`"; then
1433 CFLAGS=${CFLAGS-"-g -O2"}
1434 CXXFLAGS=${CXXFLAGS-"-g -O2"}
1435 else
1436 CFLAGS=${CFLAGS-"-O2"}
1437 CXXFLAGS=${CXXFLAGS-"-O2"}
1438 fi
1439 rm -f conftest*
1440 break
1441 fi
1442 done
1443 IFS="$save_ifs"
1444 CC=${CC-cc}
1445 else
1446 # Determine if we are using gcc.
1447 cat > conftest.c <<EOF
1448 #ifdef __GNUC__
1449 yes;
1450 #endif
1451 EOF
1452 if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
1453 cc_prog_is_gcc=yes
1454 fi
1455 rm -f conftest.c
1456 if test -z "${CFLAGS}"; then
1457 # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
1458 # is set to a version of gcc.
1459 if test "$cc_prog_is_gcc" = yes; then
1460 echo 'void f(){}' > conftest.c
1461 if test -z "`${CC} -g -c conftest.c 2>&1`"; then
1462 CFLAGS=${CFLAGS-"-g -O2"}
1463 CXXFLAGS=${CXXFLAGS-"-g -O2"}
1464 else
1465 CFLAGS=${CFLAGS-"-O2"}
1466 CXXFLAGS=${CXXFLAGS-"-O2"}
1467 fi
1468 rm -f conftest*
1469 fi
1470 fi
1471 fi
1473 # We must set the default linker to the linker used by gcc for the correct
1474 # operation of libtool. If LD is not defined and we are using gcc, try to
1475 # set the LD default to the ld used by gcc.
1476 if test -z "$LD"; then
1477 if test "$cc_prog_is_gcc" = yes; then
1478 case $build in
1479 *-*-mingw*)
1480 gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
1481 *)
1482 gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
1483 esac
1484 case $gcc_prog_ld in
1485 # Accept absolute paths.
1486 [[\\/]* | [A-Za-z]:[\\/]*)]
1487 LD="$gcc_prog_ld" ;;
1488 esac
1489 fi
1490 fi
1492 CXX=${CXX-"c++"}
1493 CFLAGS=${CFLAGS-"-g"}
1494 CXXFLAGS=${CXXFLAGS-"-g -O2"}
1495 fi
1497 # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
1498 # Set up the list of links to be made.
1499 # ${links} is the list of link names, and ${files} is the list of names to link to.
1501 # Make the links.
1502 configlinks="${links}"
1503 if test -r ./config.status ; then
1504 mv -f ./config.status ./config.back
1505 fi
1506 while test -n "${files}" ; do
1507 # set file to car of files, files to cdr of files
1508 set ${files}; file=$1; shift; files=$*
1509 set ${links}; link=$1; shift; links=$*
1511 if test ! -r ${srcdir}/${file} ; then
1512 if test ! -r ${file} ; then
1513 echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
1514 echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
1515 exit 1
1516 else
1517 srcfile=${file}
1518 fi
1519 else
1520 srcfile=${srcdir}/${file}
1521 fi
1523 ${remove} -f ${link}
1524 # Make a symlink if possible, otherwise try a hard link
1525 if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
1526 true
1527 else
1528 # We need to re-remove the file because Lynx leaves a
1529 # very strange directory there when it fails an NFS symlink.
1530 ${remove} -r -f ${link}
1531 ${hard_link} ${srcfile} ${link}
1532 fi
1533 if test ! -r ${link} ; then
1534 echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
1535 exit 1
1536 fi
1538 echo "Linked \"${link}\" to \"${srcfile}\"."
1539 done
1541 # Create a .gdbinit file which runs the one in srcdir
1542 # and tells GDB to look there for source files.
1544 if test -r ${srcdir}/.gdbinit ; then
1545 case ${srcdir} in
1546 .) ;;
1547 *) cat > ./.gdbinit <<EOF
1548 # ${NO_EDIT}
1549 dir ${srcdir}
1550 dir .
1551 source ${srcdir}/.gdbinit
1552 EOF
1553 ;;
1554 esac
1555 fi
1557 # Make sure that the compiler is able to generate an executable. If it
1558 # can't, we are probably in trouble. We don't care whether we can run the
1559 # executable--we might be using a cross compiler--we only care whether it
1560 # can be created. At this point the main configure script has set CC.
1561 we_are_ok=no
1562 echo "int main () { return 0; }" > conftest.c
1563 ${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
1564 if test $? = 0 ; then
1565 if test -s conftest || test -s conftest.exe ; then
1566 we_are_ok=yes
1567 fi
1568 fi
1569 case $we_are_ok in
1570 no)
1571 echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
1572 echo 1>&2 "*** You must set the environment variable CC to a working compiler."
1573 rm -f conftest*
1574 exit 1
1575 ;;
1576 esac
1577 rm -f conftest*
1579 # The Solaris /usr/ucb/cc compiler does not appear to work.
1580 case "${host}" in
1581 sparc-sun-solaris2*)
1582 CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
1583 if test "`type $CCBASE | sed 's/^[[^/]]*//'`" = "/usr/ucb/cc" ; then
1584 could_use=
1585 test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
1586 if test -d /opt/cygnus/bin ; then
1587 if test "$could_use" = "" ; then
1588 could_use="/opt/cygnus/bin"
1589 else
1590 could_use="$could_use or /opt/cygnus/bin"
1591 fi
1592 fi
1593 if test "$could_use" = "" ; then
1594 echo "Warning: compilation may fail because you're using"
1595 echo "/usr/ucb/cc. You should change your PATH or CC "
1596 echo "variable and rerun configure."
1597 else
1598 echo "Warning: compilation may fail because you're using"
1599 echo "/usr/ucb/cc, when you should use the C compiler from"
1600 echo "$could_use. You should change your"
1601 echo "PATH or CC variable and rerun configure."
1602 fi
1603 fi
1604 ;;
1605 esac
1607 # If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
1608 # binutils tools will find libbfd.so.
1609 case "${enable_shared}" in
1610 no | "") SET_LIB_PATH= ;;
1611 *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
1612 esac
1614 case "${host}" in
1615 *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
1616 *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
1617 esac
1619 # Record target_configdirs and the configure arguments for target and
1620 # build configuration in Makefile.
1621 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
1623 # This is the final value for target_configdirs. configdirs already
1624 # has its final value, as does build_modules. It's time to create some
1625 # lists of valid targets.
1627 all_build_modules=
1628 configure_build_modules=
1629 for module in ${build_modules} ; do
1630 all_build_modules=all-build-${module}
1631 configure_build_modules=configure-build-${module}
1632 done
1634 # Determine whether gdb needs tk/tcl or not.
1635 # Use 'maybe' since enable_gdbtk might be true even if tk isn't available
1636 # and in that case we want gdb to be built without tk. Ugh!
1637 # In fact I believe gdb is the *only* package directly dependent on tk,
1638 # so we should be able to put the 'maybe's in unconditionally and
1639 # leave out the maybe dependencies when enable_gdbtk is false. I'm not
1640 # 100% sure that that's safe though.
1642 gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui"
1643 case "$enable_gdbtk" in
1644 no)
1645 GDB_TK="" ;;
1646 yes)
1647 GDB_TK="${gdb_tk}" ;;
1648 *)
1649 # Only add the dependency on gdbtk when GDBtk is part of the gdb
1650 # distro. Eventually someone will fix this and move Insight, nee
1651 # gdbtk to a separate directory.
1652 if test -d ${srcdir}/gdb/gdbtk ; then
1653 GDB_TK="${gdb_tk}"
1654 else
1655 GDB_TK=""
1656 fi
1657 ;;
1658 esac
1660 # Create the 'maybe dependencies'. This uses a temporary file.
1662 # While at that, we remove Makefiles if we were started for recursive
1663 # configuration, so that the top-level Makefile reconfigures them,
1664 # like we used to do when configure itself was recursive.
1665 rm -f maybedep.tmp
1666 echo '# maybedep.tmp' > maybedep.tmp
1668 # Make-targets which may need maybe dependencies.
1669 mts="configure all install check clean distclean dvi info install-info"
1670 mts="${mts} installcheck mostlyclean maintainer-clean TAGS"
1672 # Loop over modules and make-targets.
1673 for module in ${build_modules} ; do
1674 if test -z "${no_recursion}" \
1675 && test -f ${build_subdir}/${module}/Makefile; then
1676 echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
1677 rm -f ${build_subdir}/${module}/Makefile
1678 fi
1679 for mt in ${mts} ; do
1680 case ${mt} in
1681 install) ;; # No installing build modules.
1682 *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;;
1683 esac
1684 done
1685 done
1686 for module in ${configdirs} ; do
1687 if test -z "${no_recursion}" \
1688 && test -f ${module}/Makefile; then
1689 echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
1690 rm -f ${module}/Makefile
1691 fi
1692 for mt in ${mts} ; do
1693 echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp
1694 done
1695 done
1696 for module in ${target_configdirs} ; do
1697 if test -z "${no_recursion}" \
1698 && test -f ${target_subdir}/${module}/Makefile; then
1699 echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
1700 rm -f ${target_subdir}/${module}/Makefile
1701 fi
1702 for mt in ${mts} ; do
1703 echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp
1704 done
1705 done
1706 maybe_dependencies=maybedep.tmp
1707 AC_SUBST_FILE(maybe_dependencies)
1709 # Create the serialization dependencies. This uses a temporary file.
1711 AC_ARG_ENABLE([serial-configure],
1712 [ --enable-serial-[{host,target,build}-]configure
1713 Force sequential configuration of
1714 sub-packages for the host, target or build
1715 machine, or all sub-packages])
1717 case ${enable_serial_configure} in
1718 yes)
1719 enable_serial_build_configure=yes
1720 enable_serial_host_configure=yes
1721 enable_serial_target_configure=yes
1722 ;;
1723 esac
1725 # These force 'configure's to be done one at a time, to avoid problems
1726 # with contention over a shared config.cache.
1727 rm -f serdep.tmp
1728 echo '# serdep.tmp' > serdep.tmp
1729 olditem=
1730 test "x${enable_serial_build_configure}" = xyes &&
1731 for item in ${build_configdirs} ; do
1732 case ${olditem} in
1733 "") ;;
1734 *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
1735 esac
1736 olditem=${item}
1737 done
1738 olditem=
1739 test "x${enable_serial_host_configure}" = xyes &&
1740 for item in ${configdirs} ; do
1741 case ${olditem} in
1742 "") ;;
1743 *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
1744 esac
1745 olditem=${item}
1746 done
1747 olditem=
1748 test "x${enable_serial_target_configure}" = xyes &&
1749 for item in ${target_configdirs} ; do
1750 case ${olditem} in
1751 "") ;;
1752 *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
1753 esac
1754 olditem=${item}
1755 done
1756 serialization_dependencies=serdep.tmp
1757 AC_SUBST_FILE(serialization_dependencies)
1759 # Base args. Strip norecursion, cache-file, srcdir, host, build,
1760 # target and nonopt. These are the ones we might not want to pass
1761 # down to subconfigures.
1762 baseargs=`echo " ${ac_configure_args} " | \
1763 sed -e 's/ --no[[^ ]]* / /' \
1764 -e 's/ --c[[a-z-]]*[[= ]][[^ ]]* / /' \
1765 -e 's/ --sr[[a-z-]]*[[= ]][[^ ]]* / /' \
1766 -e 's/ --ho[[a-z-]]*[[= ]][[^ ]]* / /' \
1767 -e 's/ --bu[[a-z-]]*[[= ]][[^ ]]* / /' \
1768 -e 's/ --t[[a-z-]]*[[= ]][[^ ]]* / /' \
1769 -e 's/ -cache-file[[= ]][[^ ]]* / /' \
1770 -e 's/ -srcdir[[= ]][[^ ]]* / /' \
1771 -e 's/ -host[[= ]][[^ ]]* / /' \
1772 -e 's/ -build[[= ]][[^ ]]* / /' \
1773 -e 's/ -target[[= ]][[^ ]]* / /' \
1774 -e "s/ [[^' -][^ ]*] / /" \
1775 -e 's/^ *//;s/ *$//'`
1777 # For the build-side libraries, we just need to pretend we're native,
1778 # and not use the same cache file. Multilibs are neither needed nor
1779 # desired.
1780 build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
1782 # For host modules, accept cache file option, or specification as blank.
1783 case "${cache_file}" in
1784 "") # empty
1785 cache_file_option="" ;;
1786 /* | [[A-Za-z]]:[[\\/]]* ) # absolute path
1787 cache_file_option="--cache-file=${cache_file}" ;;
1788 *) # relative path
1789 cache_file_option="--cache-file=../${cache_file}" ;;
1790 esac
1792 host_configargs="${cache_file_option} --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
1794 target_configargs=${baseargs}
1796 # Passing a --with-cross-host argument lets the target libraries know
1797 # whether they are being built with a cross-compiler or being built
1798 # native. However, it would be better to use other mechanisms to make the
1799 # sorts of decisions they want to make on this basis. Please consider
1800 # this option to be deprecated. FIXME.
1801 if test x${is_cross_compiler} = xyes ; then
1802 target_configargs="--with-cross-host=${host_alias} ${target_configargs}"
1803 fi
1805 # Default to --enable-multilib.
1806 if test x${enable_multilib} = x ; then
1807 target_configargs="--enable-multilib ${target_configargs}"
1808 fi
1810 # Pass --with-newlib if appropriate. Note that target_configdirs has
1811 # changed from the earlier setting of with_newlib.
1812 if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
1813 target_configargs="--with-newlib ${target_configargs}"
1814 fi
1816 # Pass the appropriate --host, --build, and --cache-file arguments.
1817 target_configargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
1819 # provide a proper gxx_include_dir.
1820 # Note, if you change the default, make sure to fix both here and in
1821 # the gcc and libstdc++-v3 subdirectories.
1822 # Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
1823 case "${with_gxx_include_dir}" in
1824 yes)
1825 AC_MSG_ERROR([--with-gxx-include-dir=[[dir]] requires a directory])
1826 ;;
1827 no | "")
1828 case "${enable_version_specific_runtime_libs}" in
1829 yes) gxx_include_dir='${libsubdir}/include/c++' ;;
1830 *)
1831 . ${srcdir}/config.if
1832 gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
1833 esac ;;
1834 *) gxx_include_dir=${with_gxx_include_dir} ;;
1835 esac
1837 FLAGS_FOR_TARGET=
1838 case " $target_configdirs " in
1839 *" newlib "*)
1840 case " $target_configargs " in
1841 *" --with-newlib "*)
1842 case "$target" in
1843 *-cygwin*)
1844 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
1845 esac
1847 # If we're not building GCC, don't discard standard headers.
1848 if test -d ${srcdir}/gcc; then
1849 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
1851 if test "${build}" != "${host}"; then
1852 # On Canadian crosses, CC_FOR_TARGET will have already been set
1853 # by `configure', so we won't have an opportunity to add -Bgcc/
1854 # to it. This is right: we don't want to search that directory
1855 # for binaries, but we want the header files in there, so add
1856 # them explicitly.
1857 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
1859 # Someone might think of using the pre-installed headers on
1860 # Canadian crosses, in case the installed compiler is not fully
1861 # compatible with the compiler being built. In this case, it
1862 # would be better to flag an error than risking having
1863 # incompatible object files being constructed. We can't
1864 # guarantee that an error will be flagged, but let's hope the
1865 # compiler will do it, when presented with incompatible header
1866 # files.
1867 fi
1868 fi
1870 case "${target}-${is_cross_compiler}" in
1871 i[[3456789]]86-*-linux*-no)
1872 # Here host == target, so we don't need to build gcc,
1873 # so we don't want to discard standard headers.
1874 FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
1875 ;;
1876 *)
1877 # If we're building newlib, use its generic headers last, but search
1878 # for any libc-related directories first (so make it the last -B
1879 # switch).
1880 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
1881 ;;
1882 esac
1883 ;;
1884 esac
1885 ;;
1886 esac
1888 # On Canadian crosses, we'll be searching the right directories for
1889 # the previously-installed cross compiler, so don't bother to add
1890 # flags for directories within the install tree of the compiler
1891 # being built; programs in there won't even run.
1892 if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
1893 # Search for pre-installed headers if nothing else fits.
1894 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
1895 fi
1897 if test "x${use_gnu_ld}" = x &&
1898 echo " ${configdirs} " | grep " ld " > /dev/null ; then
1899 # Arrange for us to find uninstalled linker scripts.
1900 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
1901 fi
1903 if test "x${CC_FOR_TARGET+set}" = xset; then
1904 :
1905 elif test -d ${srcdir}/gcc; then
1906 CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
1907 elif test "$host" = "$target"; then
1908 CC_FOR_TARGET='$(CC)'
1909 else
1910 CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
1911 fi
1912 CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
1914 if test "x${GCJ_FOR_TARGET+set}" = xset; then
1915 :
1916 elif test -d ${srcdir}/gcc; then
1917 GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
1918 elif test "$host" = "$target"; then
1919 GCJ_FOR_TARGET='gcj'
1920 else
1921 GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
1922 fi
1923 GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
1925 # Don't use libstdc++-v3's flags to configure/build itself.
1926 libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
1927 raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
1929 if test "x${CXX_FOR_TARGET+set}" = xset; then
1930 :
1931 elif test -d ${srcdir}/gcc; then
1932 # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
1933 # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
1934 # default whereas gcc does not.
1935 # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
1936 # all other cases.
1937 CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
1938 RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
1939 elif test "$host" = "$target"; then
1940 CXX_FOR_TARGET='$(CXX)'
1941 RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
1942 else
1943 CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
1944 RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
1945 fi
1946 CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
1947 RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
1949 qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[[&%]],\\\&,g'`
1950 qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[[&%]],\\\&,g'`
1952 # We want to defer the evaluation of `cmd`s and shell variables in
1953 # CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
1954 # bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
1955 # quotes, but we still have to duplicate `$'s so that shell variables
1956 # can be expanded by the nested make as shell variables, not as make
1957 # macros.
1958 qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[[$]][[$]],$$$$,g'`
1959 qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[[$]][[$]],$$$$,g'`
1961 # Wrap CC_FOR_TARGET and friends, for certain types of builds.
1962 CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
1963 GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
1964 CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
1965 RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
1966 CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
1967 RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
1969 # Makefile fragments.
1970 host_makefile_frag=${srcdir}/${host_makefile_frag}
1971 target_makefile_frag=${srcdir}/${target_makefile_frag}
1972 alphaieee_frag=${srcdir}/${alphaieee_frag}
1973 ospace_frag=${srcdir}/${ospace_frag}
1974 AC_SUBST_FILE(host_makefile_frag)
1975 AC_SUBST_FILE(target_makefile_frag)
1976 AC_SUBST_FILE(alphaieee_frag)
1977 AC_SUBST_FILE(ospace_frag)
1979 # Miscellanea: directories, flags, etc.
1980 AC_SUBST(SET_LIB_PATH)
1981 AC_SUBST(RPATH_ENVVAR)
1982 AC_SUBST(BUILD_PREFIX)
1983 AC_SUBST(BUILD_PREFIX_1)
1984 AC_SUBST(configlinks)
1985 AC_SUBST(gcc_version_trigger)
1986 AC_SUBST(gcc_version)
1987 AC_SUBST(tooldir)
1988 AC_SUBST(build_tooldir)
1989 AC_SUBST(GDB_TK)
1990 AC_SUBST(gxx_include_dir)
1991 AC_SUBST(libstdcxx_incdir)
1993 # Build module lists & subconfigure args.
1994 AC_SUBST(build_configargs)
1995 AC_SUBST(configure_build_modules)
1996 AC_SUBST(all_build_modules)
1998 # Host module lists & subconfigure args.
1999 AC_SUBST(host_configargs)
2000 AC_SUBST(configdirs)
2002 # Target module lists & subconfigure args.
2003 AC_SUBST(target_configargs)
2004 AC_SUBST(target_configdirs)
2006 # Build tools.
2007 AC_SUBST(BISON)
2008 AC_SUBST(CC_FOR_BUILD)
2009 AC_SUBST(LEX)
2010 AC_SUBST(MAKEINFO)
2011 AC_SUBST(YACC)
2012 AC_SUBST(config_shell)
2014 # Host tools.
2015 NCN_STRICT_CHECK_TOOL(AR, ar)
2016 NCN_STRICT_CHECK_TOOL(AS, as)
2017 NCN_STRICT_CHECK_TOOL(DLLTOOL, dlltool)
2018 NCN_STRICT_CHECK_TOOL(LD, ld)
2019 NCN_STRICT_CHECK_TOOL(NM, nm)
2020 NCN_STRICT_CHECK_TOOL(RANLIB, ranlib, :)
2021 NCN_STRICT_CHECK_TOOL(WINDRES, windres)
2022 NCN_STRICT_CHECK_TOOL(OBJCOPY, objcopy)
2023 NCN_STRICT_CHECK_TOOL(OBJDUMP, objdump)
2024 AC_SUBST(CC)
2025 AC_SUBST(CXX)
2026 AC_SUBST(CFLAGS)
2027 AC_SUBST(CXXFLAGS)
2028 AC_SUBST(DEFAULT_YACC)
2029 AC_SUBST(DEFAULT_LEX)
2030 AC_SUBST(DEFAULT_M4)
2032 # Target tools.
2033 NCN_STRICT_CHECK_TARGET_TOOL(AR_FOR_TARGET, ar)
2034 NCN_STRICT_CHECK_TARGET_TOOL(AS_FOR_TARGET, as)
2035 NCN_STRICT_CHECK_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool)
2036 NCN_STRICT_CHECK_TARGET_TOOL(LD_FOR_TARGET, ld)
2037 NCN_STRICT_CHECK_TARGET_TOOL(NM_FOR_TARGET, nm)
2038 NCN_STRICT_CHECK_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib, :)
2039 NCN_STRICT_CHECK_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
2041 AC_SUBST(GCC_FOR_TARGET)
2042 AC_SUBST(FLAGS_FOR_TARGET)
2043 AC_SUBST(CC_FOR_TARGET)
2044 AC_SUBST(GCJ_FOR_TARGET)
2045 AC_SUBST(CXX_FOR_TARGET)
2046 AC_SUBST(RAW_CXX_FOR_TARGET)
2047 AC_SUBST(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)
2048 AC_SUBST(RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)
2050 # Fix up target tools.
2051 if test "x${build}" = "x${host}" ; then
2052 # In this case, the newly built tools can and should be used,
2053 # so we override the results of the autoconf tests.
2054 # This should really only happen when the tools are actually being built,
2055 # but that's a further refinement. The new build scheme, where
2056 # tools are built into a structure paralleling where they're installed,
2057 # should also eliminate all of this cleanly.
2058 AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
2059 AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
2060 DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
2061 LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
2062 NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
2063 RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
2064 WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
2065 fi
2066 # Certain tools may need extra flags.
2067 AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
2068 RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
2069 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
2071 AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
2072 AC_ARG_ENABLE(maintainer-mode,
2073 [ --enable-maintainer-mode enable make rules and dependencies not useful
2074 (and sometimes confusing) to the casual installer],
2075 USE_MAINTAINER_MODE=$enableval,
2076 USE_MAINTAINER_MODE=no)
2077 AC_MSG_RESULT($USE_MAINTAINER_MODE)
2078 AC_SUBST(MAINTAINER_MODE_TRUE)
2079 AC_SUBST(MAINTAINER_MODE_FALSE)
2080 if test "$USE_MAINTAINER_MODE" = yes; then
2081 MAINTAINER_MODE_TRUE=
2082 MAINTAINER_MODE_FALSE='#'
2083 else
2084 MAINTAINER_MODE_TRUE='#'
2085 MAINTAINER_MODE_FALSE=
2086 fi
2087 MAINT=$MAINTAINER_MODE_TRUE
2088 AC_SUBST(MAINT)dnl
2090 AC_OUTPUT(Makefile)