1 /* BFD support for handling relocation entries.
2 Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
3 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
4 Free Software Foundation, Inc.
5 Written by Cygnus Support.
7 This file is part of BFD, the Binary File Descriptor library.
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 3 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
22 MA 02110-1301, USA. */
28 BFD maintains relocations in much the same way it maintains
29 symbols: they are left alone until required, then read in
30 en-masse and translated into an internal form. A common
31 routine <<bfd_perform_relocation>> acts upon the
32 canonical form to do the fixup.
34 Relocations are maintained on a per section basis,
35 while symbols are maintained on a per BFD basis.
37 All that a back end has to do to fit the BFD interface is to create
38 a <<struct reloc_cache_entry>> for each relocation
39 in a particular section, and fill in the right bits of the structures.
48 /* DO compile in the reloc_code name table from libbfd.h. */
49 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
58 typedef arelent, howto manager, Relocations, Relocations
63 This is the structure of a relocation entry:
67 .typedef enum bfd_reloc_status
69 . {* No errors detected. *}
72 . {* The relocation was performed, but there was an overflow. *}
75 . {* The address to relocate was not within the section supplied. *}
76 . bfd_reloc_outofrange,
78 . {* Used by special functions. *}
81 . {* Unsupported relocation size requested. *}
82 . bfd_reloc_notsupported,
87 . {* The symbol to relocate against was undefined. *}
88 . bfd_reloc_undefined,
90 . {* The relocation was performed, but may not be ok - presently
91 . generated only when linking i960 coff files with i960 b.out
92 . symbols. If this type is returned, the error_message argument
93 . to bfd_perform_relocation will be set. *}
96 . bfd_reloc_status_type;
99 .typedef struct reloc_cache_entry
101 . {* A pointer into the canonical table of pointers. *}
102 . struct bfd_symbol **sym_ptr_ptr;
104 . {* offset in section. *}
105 . bfd_size_type address;
107 . {* addend for relocation value. *}
110 . {* Pointer to how to perform the required relocation. *}
111 . reloc_howto_type *howto;
121 Here is a description of each of the fields within an <<arelent>>:
125 The symbol table pointer points to a pointer to the symbol
126 associated with the relocation request. It is the pointer
127 into the table returned by the back end's
128 <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
129 referenced through a pointer to a pointer so that tools like
130 the linker can fix up all the symbols of the same name by
131 modifying only one pointer. The relocation routine looks in
132 the symbol and uses the base of the section the symbol is
133 attached to and the value of the symbol as the initial
134 relocation offset. If the symbol pointer is zero, then the
135 section provided is looked up.
139 The <<address>> field gives the offset in bytes from the base of
140 the section data which owns the relocation record to the first
141 byte of relocatable information. The actual data relocated
142 will be relative to this point; for example, a relocation
143 type which modifies the bottom two bytes of a four byte word
144 would not touch the first byte pointed to in a big endian
149 The <<addend>> is a value provided by the back end to be added (!)
150 to the relocation offset. Its interpretation is dependent upon
151 the howto. For example, on the 68k the code:
156 | return foo[0x12345678];
159 Could be compiled into:
162 | moveb @@#12345678,d0
167 This could create a reloc pointing to <<foo>>, but leave the
168 offset in the data, something like:
170 |RELOCATION RECORDS FOR [.text]:
174 |00000000 4e56 fffc ; linkw fp,#-4
175 |00000004 1039 1234 5678 ; moveb @@#12345678,d0
176 |0000000a 49c0 ; extbl d0
177 |0000000c 4e5e ; unlk fp
180 Using coff and an 88k, some instructions don't have enough
181 space in them to represent the full address range, and
182 pointers have to be loaded in two parts. So you'd get something like:
184 | or.u r13,r0,hi16(_foo+0x12345678)
185 | ld.b r2,r13,lo16(_foo+0x12345678)
188 This should create two relocs, both pointing to <<_foo>>, and with
189 0x12340000 in their addend field. The data would consist of:
191 |RELOCATION RECORDS FOR [.text]:
193 |00000002 HVRT16 _foo+0x12340000
194 |00000006 LVRT16 _foo+0x12340000
196 |00000000 5da05678 ; or.u r13,r0,0x5678
197 |00000004 1c4d5678 ; ld.b r2,r13,0x5678
198 |00000008 f400c001 ; jmp r1
200 The relocation routine digs out the value from the data, adds
201 it to the addend to get the original offset, and then adds the
202 value of <<_foo>>. Note that all 32 bits have to be kept around
203 somewhere, to cope with carry from bit 15 to bit 16.
205 One further example is the sparc and the a.out format. The
206 sparc has a similar problem to the 88k, in that some
207 instructions don't have room for an entire offset, but on the
208 sparc the parts are created in odd sized lumps. The designers of
209 the a.out format chose to not use the data within the section
210 for storing part of the offset; all the offset is kept within
211 the reloc. Anything in the data should be ignored.
214 | sethi %hi(_foo+0x12345678),%g2
215 | ldsb [%g2+%lo(_foo+0x12345678)],%i0
219 Both relocs contain a pointer to <<foo>>, and the offsets
222 |RELOCATION RECORDS FOR [.text]:
224 |00000004 HI22 _foo+0x12345678
225 |00000008 LO10 _foo+0x12345678
227 |00000000 9de3bf90 ; save %sp,-112,%sp
228 |00000004 05000000 ; sethi %hi(_foo+0),%g2
229 |00000008 f048a000 ; ldsb [%g2+%lo(_foo+0)],%i0
230 |0000000c 81c7e008 ; ret
231 |00000010 81e80000 ; restore
235 The <<howto>> field can be imagined as a
236 relocation instruction. It is a pointer to a structure which
237 contains information on what to do with all of the other
238 information in the reloc record and data section. A back end
239 would normally have a relocation instruction set and turn
240 relocations into pointers to the correct structure on input -
241 but it would be possible to create each howto field on demand.
247 <<enum complain_overflow>>
249 Indicates what sort of overflow checking should be done when
250 performing a relocation.
254 .enum complain_overflow
256 . {* Do not complain on overflow. *}
257 . complain_overflow_dont,
259 . {* Complain if the value overflows when considered as a signed
260 . number one bit larger than the field. ie. A bitfield of N bits
261 . is allowed to represent -2**n to 2**n-1. *}
262 . complain_overflow_bitfield,
264 . {* Complain if the value overflows when considered as a signed
266 . complain_overflow_signed,
268 . {* Complain if the value overflows when considered as an
269 . unsigned number. *}
270 . complain_overflow_unsigned
279 The <<reloc_howto_type>> is a structure which contains all the
280 information that libbfd needs to know to tie up a back end's data.
283 .struct bfd_symbol; {* Forward declaration. *}
285 .struct reloc_howto_struct
287 . {* The type field has mainly a documentary use - the back end can
288 . do what it wants with it, though normally the back end's
289 . external idea of what a reloc number is stored
290 . in this field. For example, a PC relative word relocation
291 . in a coff environment has the type 023 - because that's
292 . what the outside world calls a R_PCRWORD reloc. *}
295 . {* The value the final relocation is shifted right by. This drops
296 . unwanted data from the relocation. *}
297 . unsigned int rightshift;
299 . {* The size of the item to be relocated. This is *not* a
300 . power-of-two measure. To get the number of bytes operated
301 . on by a type of relocation, use bfd_get_reloc_size. *}
304 . {* The number of bits in the item to be relocated. This is used
305 . when doing overflow checking. *}
306 . unsigned int bitsize;
308 . {* Notes that the relocation is relative to the location in the
309 . data section of the addend. The relocation function will
310 . subtract from the relocation value the address of the location
311 . being relocated. *}
312 . bfd_boolean pc_relative;
314 . {* The bit position of the reloc value in the destination.
315 . The relocated value is left shifted by this amount. *}
316 . unsigned int bitpos;
318 . {* What type of overflow error should be checked for when
320 . enum complain_overflow complain_on_overflow;
322 . {* If this field is non null, then the supplied function is
323 . called rather than the normal function. This allows really
324 . strange relocation methods to be accommodated (e.g., i960 callj
326 . bfd_reloc_status_type (*special_function)
327 . (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
330 . {* The textual name of the relocation type. *}
333 . {* Some formats record a relocation addend in the section contents
334 . rather than with the relocation. For ELF formats this is the
335 . distinction between USE_REL and USE_RELA (though the code checks
336 . for USE_REL == 1/0). The value of this field is TRUE if the
337 . addend is recorded with the section contents; when performing a
338 . partial link (ld -r) the section contents (the data) will be
339 . modified. The value of this field is FALSE if addends are
340 . recorded with the relocation (in arelent.addend); when performing
341 . a partial link the relocation will be modified.
342 . All relocations for all ELF USE_RELA targets should set this field
343 . to FALSE (values of TRUE should be looked on with suspicion).
344 . However, the converse is not true: not all relocations of all ELF
345 . USE_REL targets set this field to TRUE. Why this is so is peculiar
346 . to each particular target. For relocs that aren't used in partial
347 . links (e.g. GOT stuff) it doesn't matter what this is set to. *}
348 . bfd_boolean partial_inplace;
350 . {* src_mask selects the part of the instruction (or data) to be used
351 . in the relocation sum. If the target relocations don't have an
352 . addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
353 . dst_mask to extract the addend from the section contents. If
354 . relocations do have an addend in the reloc, eg. ELF USE_RELA, this
355 . field should be zero. Non-zero values for ELF USE_RELA targets are
356 . bogus as in those cases the value in the dst_mask part of the
357 . section contents should be treated as garbage. *}
360 . {* dst_mask selects which parts of the instruction (or data) are
361 . replaced with a relocated value. *}
364 . {* When some formats create PC relative instructions, they leave
365 . the value of the pc of the place being relocated in the offset
366 . slot of the instruction, so that a PC relative relocation can
367 . be made just by adding in an ordinary offset (e.g., sun3 a.out).
368 . Some formats leave the displacement part of an instruction
369 . empty (e.g., m88k bcs); this flag signals the fact. *}
370 . bfd_boolean pcrel_offset;
380 The HOWTO define is horrible and will go away.
382 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
383 . { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
386 And will be replaced with the totally magic way. But for the
387 moment, we are compatible, so do it this way.
389 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
390 . HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
391 . NAME, FALSE, 0, 0, IN)
395 This is used to fill in an empty howto entry in an array.
397 .#define EMPTY_HOWTO(C) \
398 . HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
399 . NULL, FALSE, 0, 0, FALSE)
403 Helper routine to turn a symbol into a relocation value.
405 .#define HOWTO_PREPARE(relocation, symbol) \
407 . if (symbol != NULL) \
409 . if (bfd_is_com_section (symbol->section)) \
415 . relocation = symbol->value; \
427 unsigned int bfd_get_reloc_size (reloc_howto_type *);
430 For a reloc_howto_type that operates on a fixed number of bytes,
431 this returns the number of bytes operated on.
435 bfd_get_reloc_size (reloc_howto_type
*howto
)
456 How relocs are tied together in an <<asection>>:
458 .typedef struct relent_chain
461 . struct relent_chain *next;
467 /* N_ONES produces N one bits, without overflowing machine arithmetic. */
468 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
475 bfd_reloc_status_type bfd_check_overflow
476 (enum complain_overflow how,
477 unsigned int bitsize,
478 unsigned int rightshift,
479 unsigned int addrsize,
483 Perform overflow checking on @var{relocation} which has
484 @var{bitsize} significant bits and will be shifted right by
485 @var{rightshift} bits, on a machine with addresses containing
486 @var{addrsize} significant bits. The result is either of
487 @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
491 bfd_reloc_status_type
492 bfd_check_overflow (enum complain_overflow how
,
493 unsigned int bitsize
,
494 unsigned int rightshift
,
495 unsigned int addrsize
,
498 bfd_vma fieldmask
, addrmask
, signmask
, ss
, a
;
499 bfd_reloc_status_type flag
= bfd_reloc_ok
;
501 /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
502 we'll be permissive: extra bits in the field mask will
503 automatically extend the address mask for purposes of the
505 fieldmask
= N_ONES (bitsize
);
506 signmask
= ~fieldmask
;
507 addrmask
= N_ONES (addrsize
) | fieldmask
;
508 a
= (relocation
& addrmask
) >> rightshift
;;
512 case complain_overflow_dont
:
515 case complain_overflow_signed
:
516 /* If any sign bits are set, all sign bits must be set. That
517 is, A must be a valid negative address after shifting. */
518 signmask
= ~ (fieldmask
>> 1);
521 case complain_overflow_bitfield
:
522 /* Bitfields are sometimes signed, sometimes unsigned. We
523 explicitly allow an address wrap too, which means a bitfield
524 of n bits is allowed to store -2**n to 2**n-1. Thus overflow
525 if the value has some, but not all, bits set outside the
528 if (ss
!= 0 && ss
!= ((addrmask
>> rightshift
) & signmask
))
529 flag
= bfd_reloc_overflow
;
532 case complain_overflow_unsigned
:
533 /* We have an overflow if the address does not fit in the field. */
534 if ((a
& signmask
) != 0)
535 flag
= bfd_reloc_overflow
;
547 bfd_perform_relocation
550 bfd_reloc_status_type bfd_perform_relocation
552 arelent *reloc_entry,
554 asection *input_section,
556 char **error_message);
559 If @var{output_bfd} is supplied to this function, the
560 generated image will be relocatable; the relocations are
561 copied to the output file after they have been changed to
562 reflect the new state of the world. There are two ways of
563 reflecting the results of partial linkage in an output file:
564 by modifying the output data in place, and by modifying the
565 relocation record. Some native formats (e.g., basic a.out and
566 basic coff) have no way of specifying an addend in the
567 relocation type, so the addend has to go in the output data.
568 This is no big deal since in these formats the output data
569 slot will always be big enough for the addend. Complex reloc
570 types with addends were invented to solve just this problem.
571 The @var{error_message} argument is set to an error message if
572 this return @code{bfd_reloc_dangerous}.
576 bfd_reloc_status_type
577 bfd_perform_relocation (bfd
*abfd
,
578 arelent
*reloc_entry
,
580 asection
*input_section
,
582 char **error_message
)
585 bfd_reloc_status_type flag
= bfd_reloc_ok
;
586 bfd_size_type octets
= reloc_entry
->address
* bfd_octets_per_byte (abfd
);
587 bfd_vma output_base
= 0;
588 reloc_howto_type
*howto
= reloc_entry
->howto
;
589 asection
*reloc_target_output_section
;
592 symbol
= *(reloc_entry
->sym_ptr_ptr
);
593 if (bfd_is_abs_section (symbol
->section
)
594 && output_bfd
!= NULL
)
596 reloc_entry
->address
+= input_section
->output_offset
;
600 /* If we are not producing relocatable output, return an error if
601 the symbol is not defined. An undefined weak symbol is
602 considered to have a value of zero (SVR4 ABI, p. 4-27). */
603 if (bfd_is_und_section (symbol
->section
)
604 && (symbol
->flags
& BSF_WEAK
) == 0
605 && output_bfd
== NULL
)
606 flag
= bfd_reloc_undefined
;
608 /* If there is a function supplied to handle this relocation type,
609 call it. It'll return `bfd_reloc_continue' if further processing
611 if (howto
->special_function
)
613 bfd_reloc_status_type cont
;
614 cont
= howto
->special_function (abfd
, reloc_entry
, symbol
, data
,
615 input_section
, output_bfd
,
617 if (cont
!= bfd_reloc_continue
)
621 /* Is the address of the relocation really within the section? */
622 if (reloc_entry
->address
> bfd_get_section_limit (abfd
, input_section
))
623 return bfd_reloc_outofrange
;
625 /* Work out which section the relocation is targeted at and the
626 initial relocation command value. */
628 /* Get symbol value. (Common symbols are special.) */
629 if (bfd_is_com_section (symbol
->section
))
632 relocation
= symbol
->value
;
634 reloc_target_output_section
= symbol
->section
->output_section
;
636 /* Convert input-section-relative symbol value to absolute. */
637 if ((output_bfd
&& ! howto
->partial_inplace
)
638 || reloc_target_output_section
== NULL
)
641 output_base
= reloc_target_output_section
->vma
;
643 relocation
+= output_base
+ symbol
->section
->output_offset
;
645 /* Add in supplied addend. */
646 relocation
+= reloc_entry
->addend
;
648 /* Here the variable relocation holds the final address of the
649 symbol we are relocating against, plus any addend. */
651 if (howto
->pc_relative
)
653 /* This is a PC relative relocation. We want to set RELOCATION
654 to the distance between the address of the symbol and the
655 location. RELOCATION is already the address of the symbol.
657 We start by subtracting the address of the section containing
660 If pcrel_offset is set, we must further subtract the position
661 of the location within the section. Some targets arrange for
662 the addend to be the negative of the position of the location
663 within the section; for example, i386-aout does this. For
664 i386-aout, pcrel_offset is FALSE. Some other targets do not
665 include the position of the location; for example, m88kbcs,
666 or ELF. For those targets, pcrel_offset is TRUE.
668 If we are producing relocatable output, then we must ensure
669 that this reloc will be correctly computed when the final
670 relocation is done. If pcrel_offset is FALSE we want to wind
671 up with the negative of the location within the section,
672 which means we must adjust the existing addend by the change
673 in the location within the section. If pcrel_offset is TRUE
674 we do not want to adjust the existing addend at all.
676 FIXME: This seems logical to me, but for the case of
677 producing relocatable output it is not what the code
678 actually does. I don't want to change it, because it seems
679 far too likely that something will break. */
682 input_section
->output_section
->vma
+ input_section
->output_offset
;
684 if (howto
->pcrel_offset
)
685 relocation
-= reloc_entry
->address
;
688 if (output_bfd
!= NULL
)
690 if (! howto
->partial_inplace
)
692 /* This is a partial relocation, and we want to apply the relocation
693 to the reloc entry rather than the raw data. Modify the reloc
694 inplace to reflect what we now know. */
695 reloc_entry
->addend
= relocation
;
696 reloc_entry
->address
+= input_section
->output_offset
;
701 /* This is a partial relocation, but inplace, so modify the
704 If we've relocated with a symbol with a section, change
705 into a ref to the section belonging to the symbol. */
707 reloc_entry
->address
+= input_section
->output_offset
;
710 if (abfd
->xvec
->flavour
== bfd_target_coff_flavour
711 && strcmp (abfd
->xvec
->name
, "coff-Intel-little") != 0
712 && strcmp (abfd
->xvec
->name
, "coff-Intel-big") != 0)
714 /* For m68k-coff, the addend was being subtracted twice during
715 relocation with -r. Removing the line below this comment
716 fixes that problem; see PR 2953.
718 However, Ian wrote the following, regarding removing the line below,
719 which explains why it is still enabled: --djm
721 If you put a patch like that into BFD you need to check all the COFF
722 linkers. I am fairly certain that patch will break coff-i386 (e.g.,
723 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
724 problem in a different way. There may very well be a reason that the
725 code works as it does.
727 Hmmm. The first obvious point is that bfd_perform_relocation should
728 not have any tests that depend upon the flavour. It's seem like
729 entirely the wrong place for such a thing. The second obvious point
730 is that the current code ignores the reloc addend when producing
731 relocatable output for COFF. That's peculiar. In fact, I really
732 have no idea what the point of the line you want to remove is.
734 A typical COFF reloc subtracts the old value of the symbol and adds in
735 the new value to the location in the object file (if it's a pc
736 relative reloc it adds the difference between the symbol value and the
737 location). When relocating we need to preserve that property.
739 BFD handles this by setting the addend to the negative of the old
740 value of the symbol. Unfortunately it handles common symbols in a
741 non-standard way (it doesn't subtract the old value) but that's a
742 different story (we can't change it without losing backward
743 compatibility with old object files) (coff-i386 does subtract the old
744 value, to be compatible with existing coff-i386 targets, like SCO).
746 So everything works fine when not producing relocatable output. When
747 we are producing relocatable output, logically we should do exactly
748 what we do when not producing relocatable output. Therefore, your
749 patch is correct. In fact, it should probably always just set
750 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
751 add the value into the object file. This won't hurt the COFF code,
752 which doesn't use the addend; I'm not sure what it will do to other
753 formats (the thing to check for would be whether any formats both use
754 the addend and set partial_inplace).
756 When I wanted to make coff-i386 produce relocatable output, I ran
757 into the problem that you are running into: I wanted to remove that
758 line. Rather than risk it, I made the coff-i386 relocs use a special
759 function; it's coff_i386_reloc in coff-i386.c. The function
760 specifically adds the addend field into the object file, knowing that
761 bfd_perform_relocation is not going to. If you remove that line, then
762 coff-i386.c will wind up adding the addend field in twice. It's
763 trivial to fix; it just needs to be done.
765 The problem with removing the line is just that it may break some
766 working code. With BFD it's hard to be sure of anything. The right
767 way to deal with this is simply to build and test at least all the
768 supported COFF targets. It should be straightforward if time and disk
769 space consuming. For each target:
771 2) generate some executable, and link it using -r (I would
772 probably use paranoia.o and link against newlib/libc.a, which
773 for all the supported targets would be available in
774 /usr/cygnus/progressive/H-host/target/lib/libc.a).
775 3) make the change to reloc.c
776 4) rebuild the linker
778 6) if the resulting object files are the same, you have at least
780 7) if they are different you have to figure out which version is
783 relocation
-= reloc_entry
->addend
;
784 reloc_entry
->addend
= 0;
788 reloc_entry
->addend
= relocation
;
794 reloc_entry
->addend
= 0;
797 /* FIXME: This overflow checking is incomplete, because the value
798 might have overflowed before we get here. For a correct check we
799 need to compute the value in a size larger than bitsize, but we
800 can't reasonably do that for a reloc the same size as a host
802 FIXME: We should also do overflow checking on the result after
803 adding in the value contained in the object file. */
804 if (howto
->complain_on_overflow
!= complain_overflow_dont
805 && flag
== bfd_reloc_ok
)
806 flag
= bfd_check_overflow (howto
->complain_on_overflow
,
809 bfd_arch_bits_per_address (abfd
),
812 /* Either we are relocating all the way, or we don't want to apply
813 the relocation to the reloc entry (probably because there isn't
814 any room in the output format to describe addends to relocs). */
816 /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
817 (OSF version 1.3, compiler version 3.11). It miscompiles the
831 x <<= (unsigned long) s.i0;
835 printf ("succeeded (%lx)\n", x);
839 relocation
>>= (bfd_vma
) howto
->rightshift
;
841 /* Shift everything up to where it's going to be used. */
842 relocation
<<= (bfd_vma
) howto
->bitpos
;
844 /* Wait for the day when all have the mask in them. */
847 i instruction to be left alone
848 o offset within instruction
849 r relocation offset to apply
858 (( i i i i i o o o o o from bfd_get<size>
859 and S S S S S) to get the size offset we want
860 + r r r r r r r r r r) to get the final value to place
861 and D D D D D to chop to right size
862 -----------------------
865 ( i i i i i o o o o o from bfd_get<size>
866 and N N N N N ) get instruction
867 -----------------------
873 -----------------------
874 = R R R R R R R R R R put into bfd_put<size>
878 x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask))
884 char x
= bfd_get_8 (abfd
, (char *) data
+ octets
);
886 bfd_put_8 (abfd
, x
, (unsigned char *) data
+ octets
);
892 short x
= bfd_get_16 (abfd
, (bfd_byte
*) data
+ octets
);
894 bfd_put_16 (abfd
, (bfd_vma
) x
, (unsigned char *) data
+ octets
);
899 long x
= bfd_get_32 (abfd
, (bfd_byte
*) data
+ octets
);
901 bfd_put_32 (abfd
, (bfd_vma
) x
, (bfd_byte
*) data
+ octets
);
906 long x
= bfd_get_32 (abfd
, (bfd_byte
*) data
+ octets
);
907 relocation
= -relocation
;
909 bfd_put_32 (abfd
, (bfd_vma
) x
, (bfd_byte
*) data
+ octets
);
915 long x
= bfd_get_16 (abfd
, (bfd_byte
*) data
+ octets
);
916 relocation
= -relocation
;
918 bfd_put_16 (abfd
, (bfd_vma
) x
, (bfd_byte
*) data
+ octets
);
929 bfd_vma x
= bfd_get_64 (abfd
, (bfd_byte
*) data
+ octets
);
931 bfd_put_64 (abfd
, x
, (bfd_byte
*) data
+ octets
);
938 return bfd_reloc_other
;
946 bfd_install_relocation
949 bfd_reloc_status_type bfd_install_relocation
951 arelent *reloc_entry,
952 void *data, bfd_vma data_start,
953 asection *input_section,
954 char **error_message);
957 This looks remarkably like <<bfd_perform_relocation>>, except it
958 does not expect that the section contents have been filled in.
959 I.e., it's suitable for use when creating, rather than applying
962 For now, this function should be considered reserved for the
966 bfd_reloc_status_type
967 bfd_install_relocation (bfd
*abfd
,
968 arelent
*reloc_entry
,
970 bfd_vma data_start_offset
,
971 asection
*input_section
,
972 char **error_message
)
975 bfd_reloc_status_type flag
= bfd_reloc_ok
;
976 bfd_size_type octets
= reloc_entry
->address
* bfd_octets_per_byte (abfd
);
977 bfd_vma output_base
= 0;
978 reloc_howto_type
*howto
= reloc_entry
->howto
;
979 asection
*reloc_target_output_section
;
983 symbol
= *(reloc_entry
->sym_ptr_ptr
);
984 if (bfd_is_abs_section (symbol
->section
))
986 reloc_entry
->address
+= input_section
->output_offset
;
990 /* If there is a function supplied to handle this relocation type,
991 call it. It'll return `bfd_reloc_continue' if further processing
993 if (howto
->special_function
)
995 bfd_reloc_status_type cont
;
997 /* XXX - The special_function calls haven't been fixed up to deal
998 with creating new relocations and section contents. */
999 cont
= howto
->special_function (abfd
, reloc_entry
, symbol
,
1000 /* XXX - Non-portable! */
1001 ((bfd_byte
*) data_start
1002 - data_start_offset
),
1003 input_section
, abfd
, error_message
);
1004 if (cont
!= bfd_reloc_continue
)
1008 /* Is the address of the relocation really within the section? */
1009 if (reloc_entry
->address
> bfd_get_section_limit (abfd
, input_section
))
1010 return bfd_reloc_outofrange
;
1012 /* Work out which section the relocation is targeted at and the
1013 initial relocation command value. */
1015 /* Get symbol value. (Common symbols are special.) */
1016 if (bfd_is_com_section (symbol
->section
))
1019 relocation
= symbol
->value
;
1021 reloc_target_output_section
= symbol
->section
->output_section
;
1023 /* Convert input-section-relative symbol value to absolute. */
1024 if (! howto
->partial_inplace
)
1027 output_base
= reloc_target_output_section
->vma
;
1029 relocation
+= output_base
+ symbol
->section
->output_offset
;
1031 /* Add in supplied addend. */
1032 relocation
+= reloc_entry
->addend
;
1034 /* Here the variable relocation holds the final address of the
1035 symbol we are relocating against, plus any addend. */
1037 if (howto
->pc_relative
)
1039 /* This is a PC relative relocation. We want to set RELOCATION
1040 to the distance between the address of the symbol and the
1041 location. RELOCATION is already the address of the symbol.
1043 We start by subtracting the address of the section containing
1046 If pcrel_offset is set, we must further subtract the position
1047 of the location within the section. Some targets arrange for
1048 the addend to be the negative of the position of the location
1049 within the section; for example, i386-aout does this. For
1050 i386-aout, pcrel_offset is FALSE. Some other targets do not
1051 include the position of the location; for example, m88kbcs,
1052 or ELF. For those targets, pcrel_offset is TRUE.
1054 If we are producing relocatable output, then we must ensure
1055 that this reloc will be correctly computed when the final
1056 relocation is done. If pcrel_offset is FALSE we want to wind
1057 up with the negative of the location within the section,
1058 which means we must adjust the existing addend by the change
1059 in the location within the section. If pcrel_offset is TRUE
1060 we do not want to adjust the existing addend at all.
1062 FIXME: This seems logical to me, but for the case of
1063 producing relocatable output it is not what the code
1064 actually does. I don't want to change it, because it seems
1065 far too likely that something will break. */
1068 input_section
->output_section
->vma
+ input_section
->output_offset
;
1070 if (howto
->pcrel_offset
&& howto
->partial_inplace
)
1071 relocation
-= reloc_entry
->address
;
1074 if (! howto
->partial_inplace
)
1076 /* This is a partial relocation, and we want to apply the relocation
1077 to the reloc entry rather than the raw data. Modify the reloc
1078 inplace to reflect what we now know. */
1079 reloc_entry
->addend
= relocation
;
1080 reloc_entry
->address
+= input_section
->output_offset
;
1085 /* This is a partial relocation, but inplace, so modify the
1088 If we've relocated with a symbol with a section, change
1089 into a ref to the section belonging to the symbol. */
1090 reloc_entry
->address
+= input_section
->output_offset
;
1093 if (abfd
->xvec
->flavour
== bfd_target_coff_flavour
1094 && strcmp (abfd
->xvec
->name
, "coff-Intel-little") != 0
1095 && strcmp (abfd
->xvec
->name
, "coff-Intel-big") != 0)
1098 /* For m68k-coff, the addend was being subtracted twice during
1099 relocation with -r. Removing the line below this comment
1100 fixes that problem; see PR 2953.
1102 However, Ian wrote the following, regarding removing the line below,
1103 which explains why it is still enabled: --djm
1105 If you put a patch like that into BFD you need to check all the COFF
1106 linkers. I am fairly certain that patch will break coff-i386 (e.g.,
1107 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1108 problem in a different way. There may very well be a reason that the
1109 code works as it does.
1111 Hmmm. The first obvious point is that bfd_install_relocation should
1112 not have any tests that depend upon the flavour. It's seem like
1113 entirely the wrong place for such a thing. The second obvious point
1114 is that the current code ignores the reloc addend when producing
1115 relocatable output for COFF. That's peculiar. In fact, I really
1116 have no idea what the point of the line you want to remove is.
1118 A typical COFF reloc subtracts the old value of the symbol and adds in
1119 the new value to the location in the object file (if it's a pc
1120 relative reloc it adds the difference between the symbol value and the
1121 location). When relocating we need to preserve that property.
1123 BFD handles this by setting the addend to the negative of the old
1124 value of the symbol. Unfortunately it handles common symbols in a
1125 non-standard way (it doesn't subtract the old value) but that's a
1126 different story (we can't change it without losing backward
1127 compatibility with old object files) (coff-i386 does subtract the old
1128 value, to be compatible with existing coff-i386 targets, like SCO).
1130 So everything works fine when not producing relocatable output. When
1131 we are producing relocatable output, logically we should do exactly
1132 what we do when not producing relocatable output. Therefore, your
1133 patch is correct. In fact, it should probably always just set
1134 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1135 add the value into the object file. This won't hurt the COFF code,
1136 which doesn't use the addend; I'm not sure what it will do to other
1137 formats (the thing to check for would be whether any formats both use
1138 the addend and set partial_inplace).
1140 When I wanted to make coff-i386 produce relocatable output, I ran
1141 into the problem that you are running into: I wanted to remove that
1142 line. Rather than risk it, I made the coff-i386 relocs use a special
1143 function; it's coff_i386_reloc in coff-i386.c. The function
1144 specifically adds the addend field into the object file, knowing that
1145 bfd_install_relocation is not going to. If you remove that line, then
1146 coff-i386.c will wind up adding the addend field in twice. It's
1147 trivial to fix; it just needs to be done.
1149 The problem with removing the line is just that it may break some
1150 working code. With BFD it's hard to be sure of anything. The right
1151 way to deal with this is simply to build and test at least all the
1152 supported COFF targets. It should be straightforward if time and disk
1153 space consuming. For each target:
1155 2) generate some executable, and link it using -r (I would
1156 probably use paranoia.o and link against newlib/libc.a, which
1157 for all the supported targets would be available in
1158 /usr/cygnus/progressive/H-host/target/lib/libc.a).
1159 3) make the change to reloc.c
1160 4) rebuild the linker
1162 6) if the resulting object files are the same, you have at least
1164 7) if they are different you have to figure out which version is
1166 relocation
-= reloc_entry
->addend
;
1167 /* FIXME: There should be no target specific code here... */
1168 if (strcmp (abfd
->xvec
->name
, "coff-z8k") != 0)
1169 reloc_entry
->addend
= 0;
1173 reloc_entry
->addend
= relocation
;
1177 /* FIXME: This overflow checking is incomplete, because the value
1178 might have overflowed before we get here. For a correct check we
1179 need to compute the value in a size larger than bitsize, but we
1180 can't reasonably do that for a reloc the same size as a host
1182 FIXME: We should also do overflow checking on the result after
1183 adding in the value contained in the object file. */
1184 if (howto
->complain_on_overflow
!= complain_overflow_dont
)
1185 flag
= bfd_check_overflow (howto
->complain_on_overflow
,
1188 bfd_arch_bits_per_address (abfd
),
1191 /* Either we are relocating all the way, or we don't want to apply
1192 the relocation to the reloc entry (probably because there isn't
1193 any room in the output format to describe addends to relocs). */
1195 /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1196 (OSF version 1.3, compiler version 3.11). It miscompiles the
1210 x <<= (unsigned long) s.i0;
1212 printf ("failed\n");
1214 printf ("succeeded (%lx)\n", x);
1218 relocation
>>= (bfd_vma
) howto
->rightshift
;
1220 /* Shift everything up to where it's going to be used. */
1221 relocation
<<= (bfd_vma
) howto
->bitpos
;
1223 /* Wait for the day when all have the mask in them. */
1226 i instruction to be left alone
1227 o offset within instruction
1228 r relocation offset to apply
1237 (( i i i i i o o o o o from bfd_get<size>
1238 and S S S S S) to get the size offset we want
1239 + r r r r r r r r r r) to get the final value to place
1240 and D D D D D to chop to right size
1241 -----------------------
1244 ( i i i i i o o o o o from bfd_get<size>
1245 and N N N N N ) get instruction
1246 -----------------------
1252 -----------------------
1253 = R R R R R R R R R R put into bfd_put<size>
1257 x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask))
1259 data
= (bfd_byte
*) data_start
+ (octets
- data_start_offset
);
1261 switch (howto
->size
)
1265 char x
= bfd_get_8 (abfd
, data
);
1267 bfd_put_8 (abfd
, x
, data
);
1273 short x
= bfd_get_16 (abfd
, data
);
1275 bfd_put_16 (abfd
, (bfd_vma
) x
, data
);
1280 long x
= bfd_get_32 (abfd
, data
);
1282 bfd_put_32 (abfd
, (bfd_vma
) x
, data
);
1287 long x
= bfd_get_32 (abfd
, data
);
1288 relocation
= -relocation
;
1290 bfd_put_32 (abfd
, (bfd_vma
) x
, data
);
1300 bfd_vma x
= bfd_get_64 (abfd
, data
);
1302 bfd_put_64 (abfd
, x
, data
);
1306 return bfd_reloc_other
;
1312 /* This relocation routine is used by some of the backend linkers.
1313 They do not construct asymbol or arelent structures, so there is no
1314 reason for them to use bfd_perform_relocation. Also,
1315 bfd_perform_relocation is so hacked up it is easier to write a new
1316 function than to try to deal with it.
1318 This routine does a final relocation. Whether it is useful for a
1319 relocatable link depends upon how the object format defines
1322 FIXME: This routine ignores any special_function in the HOWTO,
1323 since the existing special_function values have been written for
1324 bfd_perform_relocation.
1326 HOWTO is the reloc howto information.
1327 INPUT_BFD is the BFD which the reloc applies to.
1328 INPUT_SECTION is the section which the reloc applies to.
1329 CONTENTS is the contents of the section.
1330 ADDRESS is the address of the reloc within INPUT_SECTION.
1331 VALUE is the value of the symbol the reloc refers to.
1332 ADDEND is the addend of the reloc. */
1334 bfd_reloc_status_type
1335 _bfd_final_link_relocate (reloc_howto_type
*howto
,
1337 asection
*input_section
,
1345 /* Sanity check the address. */
1346 if (address
> bfd_get_section_limit (input_bfd
, input_section
))
1347 return bfd_reloc_outofrange
;
1349 /* This function assumes that we are dealing with a basic relocation
1350 against a symbol. We want to compute the value of the symbol to
1351 relocate to. This is just VALUE, the value of the symbol, plus
1352 ADDEND, any addend associated with the reloc. */
1353 relocation
= value
+ addend
;
1355 /* If the relocation is PC relative, we want to set RELOCATION to
1356 the distance between the symbol (currently in RELOCATION) and the
1357 location we are relocating. Some targets (e.g., i386-aout)
1358 arrange for the contents of the section to be the negative of the
1359 offset of the location within the section; for such targets
1360 pcrel_offset is FALSE. Other targets (e.g., m88kbcs or ELF)
1361 simply leave the contents of the section as zero; for such
1362 targets pcrel_offset is TRUE. If pcrel_offset is FALSE we do not
1363 need to subtract out the offset of the location within the
1364 section (which is just ADDRESS). */
1365 if (howto
->pc_relative
)
1367 relocation
-= (input_section
->output_section
->vma
1368 + input_section
->output_offset
);
1369 if (howto
->pcrel_offset
)
1370 relocation
-= address
;
1373 return _bfd_relocate_contents (howto
, input_bfd
, relocation
,
1374 contents
+ address
);
1377 /* Relocate a given location using a given value and howto. */
1379 bfd_reloc_status_type
1380 _bfd_relocate_contents (reloc_howto_type
*howto
,
1387 bfd_reloc_status_type flag
;
1388 unsigned int rightshift
= howto
->rightshift
;
1389 unsigned int bitpos
= howto
->bitpos
;
1391 /* If the size is negative, negate RELOCATION. This isn't very
1393 if (howto
->size
< 0)
1394 relocation
= -relocation
;
1396 /* Get the value we are going to relocate. */
1397 size
= bfd_get_reloc_size (howto
);
1404 x
= bfd_get_8 (input_bfd
, location
);
1407 x
= bfd_get_16 (input_bfd
, location
);
1410 x
= bfd_get_32 (input_bfd
, location
);
1414 x
= bfd_get_64 (input_bfd
, location
);
1421 /* Check for overflow. FIXME: We may drop bits during the addition
1422 which we don't check for. We must either check at every single
1423 operation, which would be tedious, or we must do the computations
1424 in a type larger than bfd_vma, which would be inefficient. */
1425 flag
= bfd_reloc_ok
;
1426 if (howto
->complain_on_overflow
!= complain_overflow_dont
)
1428 bfd_vma addrmask
, fieldmask
, signmask
, ss
;
1431 /* Get the values to be added together. For signed and unsigned
1432 relocations, we assume that all values should be truncated to
1433 the size of an address. For bitfields, all the bits matter.
1434 See also bfd_check_overflow. */
1435 fieldmask
= N_ONES (howto
->bitsize
);
1436 signmask
= ~fieldmask
;
1437 addrmask
= N_ONES (bfd_arch_bits_per_address (input_bfd
)) | fieldmask
;
1438 a
= (relocation
& addrmask
) >> rightshift
;
1439 b
= (x
& howto
->src_mask
& addrmask
) >> bitpos
;
1441 switch (howto
->complain_on_overflow
)
1443 case complain_overflow_signed
:
1444 /* If any sign bits are set, all sign bits must be set.
1445 That is, A must be a valid negative address after
1447 signmask
= ~(fieldmask
>> 1);
1450 case complain_overflow_bitfield
:
1451 /* Much like the signed check, but for a field one bit
1452 wider. We allow a bitfield to represent numbers in the
1453 range -2**n to 2**n-1, where n is the number of bits in the
1454 field. Note that when bfd_vma is 32 bits, a 32-bit reloc
1455 can't overflow, which is exactly what we want. */
1457 if (ss
!= 0 && ss
!= ((addrmask
>> rightshift
) & signmask
))
1458 flag
= bfd_reloc_overflow
;
1460 /* We only need this next bit of code if the sign bit of B
1461 is below the sign bit of A. This would only happen if
1462 SRC_MASK had fewer bits than BITSIZE. Note that if
1463 SRC_MASK has more bits than BITSIZE, we can get into
1464 trouble; we would need to verify that B is in range, as
1465 we do for A above. */
1466 ss
= ((~howto
->src_mask
) >> 1) & howto
->src_mask
;
1469 /* Set all the bits above the sign bit. */
1472 /* Now we can do the addition. */
1475 /* See if the result has the correct sign. Bits above the
1476 sign bit are junk now; ignore them. If the sum is
1477 positive, make sure we did not have all negative inputs;
1478 if the sum is negative, make sure we did not have all
1479 positive inputs. The test below looks only at the sign
1480 bits, and it really just
1481 SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1483 We mask with addrmask here to explicitly allow an address
1484 wrap-around. The Linux kernel relies on it, and it is
1485 the only way to write assembler code which can run when
1486 loaded at a location 0x80000000 away from the location at
1487 which it is linked. */
1488 if (((~(a
^ b
)) & (a
^ sum
)) & signmask
& addrmask
)
1489 flag
= bfd_reloc_overflow
;
1492 case complain_overflow_unsigned
:
1493 /* Checking for an unsigned overflow is relatively easy:
1494 trim the addresses and add, and trim the result as well.
1495 Overflow is normally indicated when the result does not
1496 fit in the field. However, we also need to consider the
1497 case when, e.g., fieldmask is 0x7fffffff or smaller, an
1498 input is 0x80000000, and bfd_vma is only 32 bits; then we
1499 will get sum == 0, but there is an overflow, since the
1500 inputs did not fit in the field. Instead of doing a
1501 separate test, we can check for this by or-ing in the
1502 operands when testing for the sum overflowing its final
1504 sum
= (a
+ b
) & addrmask
;
1505 if ((a
| b
| sum
) & signmask
)
1506 flag
= bfd_reloc_overflow
;
1514 /* Put RELOCATION in the right bits. */
1515 relocation
>>= (bfd_vma
) rightshift
;
1516 relocation
<<= (bfd_vma
) bitpos
;
1518 /* Add RELOCATION to the right bits of X. */
1519 x
= ((x
& ~howto
->dst_mask
)
1520 | (((x
& howto
->src_mask
) + relocation
) & howto
->dst_mask
));
1522 /* Put the relocated value back in the object file. */
1528 bfd_put_8 (input_bfd
, x
, location
);
1531 bfd_put_16 (input_bfd
, x
, location
);
1534 bfd_put_32 (input_bfd
, x
, location
);
1538 bfd_put_64 (input_bfd
, x
, location
);
1548 /* Clear a given location using a given howto, by applying a relocation value
1549 of zero and discarding any in-place addend. This is used for fixed-up
1550 relocations against discarded symbols, to make ignorable debug or unwind
1551 information more obvious. */
1554 _bfd_clear_contents (reloc_howto_type
*howto
,
1561 /* Get the value we are going to relocate. */
1562 size
= bfd_get_reloc_size (howto
);
1569 x
= bfd_get_8 (input_bfd
, location
);
1572 x
= bfd_get_16 (input_bfd
, location
);
1575 x
= bfd_get_32 (input_bfd
, location
);
1579 x
= bfd_get_64 (input_bfd
, location
);
1586 /* Zero out the unwanted bits of X. */
1587 x
&= ~howto
->dst_mask
;
1589 /* Put the relocated value back in the object file. */
1596 bfd_put_8 (input_bfd
, x
, location
);
1599 bfd_put_16 (input_bfd
, x
, location
);
1602 bfd_put_32 (input_bfd
, x
, location
);
1606 bfd_put_64 (input_bfd
, x
, location
);
1617 howto manager, , typedef arelent, Relocations
1622 When an application wants to create a relocation, but doesn't
1623 know what the target machine might call it, it can find out by
1624 using this bit of code.
1633 The insides of a reloc code. The idea is that, eventually, there
1634 will be one enumerator for every type of relocation we ever do.
1635 Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1636 return a howto pointer.
1638 This does mean that the application must determine the correct
1639 enumerator value; you can't get a howto pointer from a random set
1660 Basic absolute relocations of N bits.
1675 PC-relative relocations. Sometimes these are relative to the address
1676 of the relocation itself; sometimes they are relative to the start of
1677 the section containing the relocation. It depends on the specific target.
1679 The 24-bit relocation is used in some Intel 960 configurations.
1684 Section relative relocations. Some targets need this for DWARF2.
1687 BFD_RELOC_32_GOT_PCREL
1689 BFD_RELOC_16_GOT_PCREL
1691 BFD_RELOC_8_GOT_PCREL
1697 BFD_RELOC_LO16_GOTOFF
1699 BFD_RELOC_HI16_GOTOFF
1701 BFD_RELOC_HI16_S_GOTOFF
1705 BFD_RELOC_64_PLT_PCREL
1707 BFD_RELOC_32_PLT_PCREL
1709 BFD_RELOC_24_PLT_PCREL
1711 BFD_RELOC_16_PLT_PCREL
1713 BFD_RELOC_8_PLT_PCREL
1721 BFD_RELOC_LO16_PLTOFF
1723 BFD_RELOC_HI16_PLTOFF
1725 BFD_RELOC_HI16_S_PLTOFF
1732 BFD_RELOC_68K_GLOB_DAT
1734 BFD_RELOC_68K_JMP_SLOT
1736 BFD_RELOC_68K_RELATIVE
1738 Relocations used by 68K ELF.
1741 BFD_RELOC_32_BASEREL
1743 BFD_RELOC_16_BASEREL
1745 BFD_RELOC_LO16_BASEREL
1747 BFD_RELOC_HI16_BASEREL
1749 BFD_RELOC_HI16_S_BASEREL
1755 Linkage-table relative.
1760 Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1763 BFD_RELOC_32_PCREL_S2
1765 BFD_RELOC_16_PCREL_S2
1767 BFD_RELOC_23_PCREL_S2
1769 These PC-relative relocations are stored as word displacements --
1770 i.e., byte displacements shifted right two bits. The 30-bit word
1771 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1772 SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
1773 signed 16-bit displacement is used on the MIPS, and the 23-bit
1774 displacement is used on the Alpha.
1781 High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1782 the target word. These are used on the SPARC.
1789 For systems that allocate a Global Pointer register, these are
1790 displacements off that register. These relocation types are
1791 handled specially, because the value the register will have is
1792 decided relatively late.
1795 BFD_RELOC_I960_CALLJ
1797 Reloc types used for i960/b.out.
1802 BFD_RELOC_SPARC_WDISP22
1808 BFD_RELOC_SPARC_GOT10
1810 BFD_RELOC_SPARC_GOT13
1812 BFD_RELOC_SPARC_GOT22
1814 BFD_RELOC_SPARC_PC10
1816 BFD_RELOC_SPARC_PC22
1818 BFD_RELOC_SPARC_WPLT30
1820 BFD_RELOC_SPARC_COPY
1822 BFD_RELOC_SPARC_GLOB_DAT
1824 BFD_RELOC_SPARC_JMP_SLOT
1826 BFD_RELOC_SPARC_RELATIVE
1828 BFD_RELOC_SPARC_UA16
1830 BFD_RELOC_SPARC_UA32
1832 BFD_RELOC_SPARC_UA64
1834 BFD_RELOC_SPARC_GOTDATA_HIX22
1836 BFD_RELOC_SPARC_GOTDATA_LOX10
1838 BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1840 BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1842 BFD_RELOC_SPARC_GOTDATA_OP
1844 SPARC ELF relocations. There is probably some overlap with other
1845 relocation types already defined.
1848 BFD_RELOC_SPARC_BASE13
1850 BFD_RELOC_SPARC_BASE22
1852 I think these are specific to SPARC a.out (e.g., Sun 4).
1862 BFD_RELOC_SPARC_OLO10
1864 BFD_RELOC_SPARC_HH22
1866 BFD_RELOC_SPARC_HM10
1868 BFD_RELOC_SPARC_LM22
1870 BFD_RELOC_SPARC_PC_HH22
1872 BFD_RELOC_SPARC_PC_HM10
1874 BFD_RELOC_SPARC_PC_LM22
1876 BFD_RELOC_SPARC_WDISP16
1878 BFD_RELOC_SPARC_WDISP19
1886 BFD_RELOC_SPARC_DISP64
1889 BFD_RELOC_SPARC_PLT32
1891 BFD_RELOC_SPARC_PLT64
1893 BFD_RELOC_SPARC_HIX22
1895 BFD_RELOC_SPARC_LOX10
1903 BFD_RELOC_SPARC_REGISTER
1908 BFD_RELOC_SPARC_REV32
1910 SPARC little endian relocation
1912 BFD_RELOC_SPARC_TLS_GD_HI22
1914 BFD_RELOC_SPARC_TLS_GD_LO10
1916 BFD_RELOC_SPARC_TLS_GD_ADD
1918 BFD_RELOC_SPARC_TLS_GD_CALL
1920 BFD_RELOC_SPARC_TLS_LDM_HI22
1922 BFD_RELOC_SPARC_TLS_LDM_LO10
1924 BFD_RELOC_SPARC_TLS_LDM_ADD
1926 BFD_RELOC_SPARC_TLS_LDM_CALL
1928 BFD_RELOC_SPARC_TLS_LDO_HIX22
1930 BFD_RELOC_SPARC_TLS_LDO_LOX10
1932 BFD_RELOC_SPARC_TLS_LDO_ADD
1934 BFD_RELOC_SPARC_TLS_IE_HI22
1936 BFD_RELOC_SPARC_TLS_IE_LO10
1938 BFD_RELOC_SPARC_TLS_IE_LD
1940 BFD_RELOC_SPARC_TLS_IE_LDX
1942 BFD_RELOC_SPARC_TLS_IE_ADD
1944 BFD_RELOC_SPARC_TLS_LE_HIX22
1946 BFD_RELOC_SPARC_TLS_LE_LOX10
1948 BFD_RELOC_SPARC_TLS_DTPMOD32
1950 BFD_RELOC_SPARC_TLS_DTPMOD64
1952 BFD_RELOC_SPARC_TLS_DTPOFF32
1954 BFD_RELOC_SPARC_TLS_DTPOFF64
1956 BFD_RELOC_SPARC_TLS_TPOFF32
1958 BFD_RELOC_SPARC_TLS_TPOFF64
1960 SPARC TLS relocations
1969 BFD_RELOC_SPU_IMM10W
1973 BFD_RELOC_SPU_IMM16W
1977 BFD_RELOC_SPU_PCREL9a
1979 BFD_RELOC_SPU_PCREL9b
1981 BFD_RELOC_SPU_PCREL16
1994 BFD_RELOC_ALPHA_GPDISP_HI16
1996 Alpha ECOFF and ELF relocations. Some of these treat the symbol or
1997 "addend" in some special way.
1998 For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1999 writing; when reading, it will be the absolute section symbol. The
2000 addend is the displacement in bytes of the "lda" instruction from
2001 the "ldah" instruction (which is at the address of this reloc).
2003 BFD_RELOC_ALPHA_GPDISP_LO16
2005 For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2006 with GPDISP_HI16 relocs. The addend is ignored when writing the
2007 relocations out, and is filled in with the file's GP value on
2008 reading, for convenience.
2011 BFD_RELOC_ALPHA_GPDISP
2013 The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2014 relocation except that there is no accompanying GPDISP_LO16
2018 BFD_RELOC_ALPHA_LITERAL
2020 BFD_RELOC_ALPHA_ELF_LITERAL
2022 BFD_RELOC_ALPHA_LITUSE
2024 The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2025 the assembler turns it into a LDQ instruction to load the address of
2026 the symbol, and then fills in a register in the real instruction.
2028 The LITERAL reloc, at the LDQ instruction, refers to the .lita
2029 section symbol. The addend is ignored when writing, but is filled
2030 in with the file's GP value on reading, for convenience, as with the
2033 The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2034 It should refer to the symbol to be referenced, as with 16_GOTOFF,
2035 but it generates output not based on the position within the .got
2036 section, but relative to the GP value chosen for the file during the
2039 The LITUSE reloc, on the instruction using the loaded address, gives
2040 information to the linker that it might be able to use to optimize
2041 away some literal section references. The symbol is ignored (read
2042 as the absolute section symbol), and the "addend" indicates the type
2043 of instruction using the register:
2044 1 - "memory" fmt insn
2045 2 - byte-manipulation (byte offset reg)
2046 3 - jsr (target of branch)
2049 BFD_RELOC_ALPHA_HINT
2051 The HINT relocation indicates a value that should be filled into the
2052 "hint" field of a jmp/jsr/ret instruction, for possible branch-
2053 prediction logic which may be provided on some processors.
2056 BFD_RELOC_ALPHA_LINKAGE
2058 The LINKAGE relocation outputs a linkage pair in the object file,
2059 which is filled by the linker.
2062 BFD_RELOC_ALPHA_CODEADDR
2064 The CODEADDR relocation outputs a STO_CA in the object file,
2065 which is filled by the linker.
2068 BFD_RELOC_ALPHA_GPREL_HI16
2070 BFD_RELOC_ALPHA_GPREL_LO16
2072 The GPREL_HI/LO relocations together form a 32-bit offset from the
2076 BFD_RELOC_ALPHA_BRSGP
2078 Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2079 share a common GP, and the target address is adjusted for
2080 STO_ALPHA_STD_GPLOAD.
2083 BFD_RELOC_ALPHA_TLSGD
2085 BFD_RELOC_ALPHA_TLSLDM
2087 BFD_RELOC_ALPHA_DTPMOD64
2089 BFD_RELOC_ALPHA_GOTDTPREL16
2091 BFD_RELOC_ALPHA_DTPREL64
2093 BFD_RELOC_ALPHA_DTPREL_HI16
2095 BFD_RELOC_ALPHA_DTPREL_LO16
2097 BFD_RELOC_ALPHA_DTPREL16
2099 BFD_RELOC_ALPHA_GOTTPREL16
2101 BFD_RELOC_ALPHA_TPREL64
2103 BFD_RELOC_ALPHA_TPREL_HI16
2105 BFD_RELOC_ALPHA_TPREL_LO16
2107 BFD_RELOC_ALPHA_TPREL16
2109 Alpha thread-local storage relocations.
2114 Bits 27..2 of the relocation address shifted right 2 bits;
2115 simple reloc otherwise.
2118 BFD_RELOC_MIPS16_JMP
2120 The MIPS16 jump instruction.
2123 BFD_RELOC_MIPS16_GPREL
2125 MIPS16 GP relative reloc.
2130 High 16 bits of 32-bit value; simple reloc.
2134 High 16 bits of 32-bit value but the low 16 bits will be sign
2135 extended and added to form the final result. If the low 16
2136 bits form a negative number, we need to add one to the high value
2137 to compensate for the borrow when the low bits are added.
2144 BFD_RELOC_HI16_PCREL
2146 High 16 bits of 32-bit pc-relative value
2148 BFD_RELOC_HI16_S_PCREL
2150 High 16 bits of 32-bit pc-relative value, adjusted
2152 BFD_RELOC_LO16_PCREL
2154 Low 16 bits of pc-relative value
2157 BFD_RELOC_MIPS16_GOT16
2159 BFD_RELOC_MIPS16_CALL16
2161 Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2162 16-bit immediate fields
2164 BFD_RELOC_MIPS16_HI16
2166 MIPS16 high 16 bits of 32-bit value.
2168 BFD_RELOC_MIPS16_HI16_S
2170 MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2171 extended and added to form the final result. If the low 16
2172 bits form a negative number, we need to add one to the high value
2173 to compensate for the borrow when the low bits are added.
2175 BFD_RELOC_MIPS16_LO16
2180 BFD_RELOC_MIPS_LITERAL
2182 Relocation against a MIPS literal section.
2185 BFD_RELOC_MIPS_GOT16
2187 BFD_RELOC_MIPS_CALL16
2189 BFD_RELOC_MIPS_GOT_HI16
2191 BFD_RELOC_MIPS_GOT_LO16
2193 BFD_RELOC_MIPS_CALL_HI16
2195 BFD_RELOC_MIPS_CALL_LO16
2199 BFD_RELOC_MIPS_GOT_PAGE
2201 BFD_RELOC_MIPS_GOT_OFST
2203 BFD_RELOC_MIPS_GOT_DISP
2205 BFD_RELOC_MIPS_SHIFT5
2207 BFD_RELOC_MIPS_SHIFT6
2209 BFD_RELOC_MIPS_INSERT_A
2211 BFD_RELOC_MIPS_INSERT_B
2213 BFD_RELOC_MIPS_DELETE
2215 BFD_RELOC_MIPS_HIGHEST
2217 BFD_RELOC_MIPS_HIGHER
2219 BFD_RELOC_MIPS_SCN_DISP
2221 BFD_RELOC_MIPS_REL16
2223 BFD_RELOC_MIPS_RELGOT
2227 BFD_RELOC_MIPS_TLS_DTPMOD32
2229 BFD_RELOC_MIPS_TLS_DTPREL32
2231 BFD_RELOC_MIPS_TLS_DTPMOD64
2233 BFD_RELOC_MIPS_TLS_DTPREL64
2235 BFD_RELOC_MIPS_TLS_GD
2237 BFD_RELOC_MIPS_TLS_LDM
2239 BFD_RELOC_MIPS_TLS_DTPREL_HI16
2241 BFD_RELOC_MIPS_TLS_DTPREL_LO16
2243 BFD_RELOC_MIPS_TLS_GOTTPREL
2245 BFD_RELOC_MIPS_TLS_TPREL32
2247 BFD_RELOC_MIPS_TLS_TPREL64
2249 BFD_RELOC_MIPS_TLS_TPREL_HI16
2251 BFD_RELOC_MIPS_TLS_TPREL_LO16
2253 MIPS ELF relocations.
2259 BFD_RELOC_MIPS_JUMP_SLOT
2261 MIPS ELF relocations (VxWorks and PLT extensions).
2265 BFD_RELOC_FRV_LABEL16
2267 BFD_RELOC_FRV_LABEL24
2273 BFD_RELOC_FRV_GPREL12
2275 BFD_RELOC_FRV_GPRELU12
2277 BFD_RELOC_FRV_GPREL32
2279 BFD_RELOC_FRV_GPRELHI
2281 BFD_RELOC_FRV_GPRELLO
2289 BFD_RELOC_FRV_FUNCDESC
2291 BFD_RELOC_FRV_FUNCDESC_GOT12
2293 BFD_RELOC_FRV_FUNCDESC_GOTHI
2295 BFD_RELOC_FRV_FUNCDESC_GOTLO
2297 BFD_RELOC_FRV_FUNCDESC_VALUE
2299 BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2301 BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2303 BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2305 BFD_RELOC_FRV_GOTOFF12
2307 BFD_RELOC_FRV_GOTOFFHI
2309 BFD_RELOC_FRV_GOTOFFLO
2311 BFD_RELOC_FRV_GETTLSOFF
2313 BFD_RELOC_FRV_TLSDESC_VALUE
2315 BFD_RELOC_FRV_GOTTLSDESC12
2317 BFD_RELOC_FRV_GOTTLSDESCHI
2319 BFD_RELOC_FRV_GOTTLSDESCLO
2321 BFD_RELOC_FRV_TLSMOFF12
2323 BFD_RELOC_FRV_TLSMOFFHI
2325 BFD_RELOC_FRV_TLSMOFFLO
2327 BFD_RELOC_FRV_GOTTLSOFF12
2329 BFD_RELOC_FRV_GOTTLSOFFHI
2331 BFD_RELOC_FRV_GOTTLSOFFLO
2333 BFD_RELOC_FRV_TLSOFF
2335 BFD_RELOC_FRV_TLSDESC_RELAX
2337 BFD_RELOC_FRV_GETTLSOFF_RELAX
2339 BFD_RELOC_FRV_TLSOFF_RELAX
2341 BFD_RELOC_FRV_TLSMOFF
2343 Fujitsu Frv Relocations.
2347 BFD_RELOC_MN10300_GOTOFF24
2349 This is a 24bit GOT-relative reloc for the mn10300.
2351 BFD_RELOC_MN10300_GOT32
2353 This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2356 BFD_RELOC_MN10300_GOT24
2358 This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2361 BFD_RELOC_MN10300_GOT16
2363 This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2366 BFD_RELOC_MN10300_COPY
2368 Copy symbol at runtime.
2370 BFD_RELOC_MN10300_GLOB_DAT
2374 BFD_RELOC_MN10300_JMP_SLOT
2378 BFD_RELOC_MN10300_RELATIVE
2380 Adjust by program base.
2382 BFD_RELOC_MN10300_SYM_DIFF
2384 Together with another reloc targeted at the same location,
2385 allows for a value that is the difference of two symbols
2386 in the same section.
2388 BFD_RELOC_MN10300_ALIGN
2390 The addend of this reloc is an alignment power that must
2391 be honoured at the offset's location, regardless of linker
2402 BFD_RELOC_386_GLOB_DAT
2404 BFD_RELOC_386_JUMP_SLOT
2406 BFD_RELOC_386_RELATIVE
2408 BFD_RELOC_386_GOTOFF
2412 BFD_RELOC_386_TLS_TPOFF
2414 BFD_RELOC_386_TLS_IE
2416 BFD_RELOC_386_TLS_GOTIE
2418 BFD_RELOC_386_TLS_LE
2420 BFD_RELOC_386_TLS_GD
2422 BFD_RELOC_386_TLS_LDM
2424 BFD_RELOC_386_TLS_LDO_32
2426 BFD_RELOC_386_TLS_IE_32
2428 BFD_RELOC_386_TLS_LE_32
2430 BFD_RELOC_386_TLS_DTPMOD32
2432 BFD_RELOC_386_TLS_DTPOFF32
2434 BFD_RELOC_386_TLS_TPOFF32
2436 BFD_RELOC_386_TLS_GOTDESC
2438 BFD_RELOC_386_TLS_DESC_CALL
2440 BFD_RELOC_386_TLS_DESC
2442 i386/elf relocations
2445 BFD_RELOC_X86_64_GOT32
2447 BFD_RELOC_X86_64_PLT32
2449 BFD_RELOC_X86_64_COPY
2451 BFD_RELOC_X86_64_GLOB_DAT
2453 BFD_RELOC_X86_64_JUMP_SLOT
2455 BFD_RELOC_X86_64_RELATIVE
2457 BFD_RELOC_X86_64_GOTPCREL
2459 BFD_RELOC_X86_64_32S
2461 BFD_RELOC_X86_64_DTPMOD64
2463 BFD_RELOC_X86_64_DTPOFF64
2465 BFD_RELOC_X86_64_TPOFF64
2467 BFD_RELOC_X86_64_TLSGD
2469 BFD_RELOC_X86_64_TLSLD
2471 BFD_RELOC_X86_64_DTPOFF32
2473 BFD_RELOC_X86_64_GOTTPOFF
2475 BFD_RELOC_X86_64_TPOFF32
2477 BFD_RELOC_X86_64_GOTOFF64
2479 BFD_RELOC_X86_64_GOTPC32
2481 BFD_RELOC_X86_64_GOT64
2483 BFD_RELOC_X86_64_GOTPCREL64
2485 BFD_RELOC_X86_64_GOTPC64
2487 BFD_RELOC_X86_64_GOTPLT64
2489 BFD_RELOC_X86_64_PLTOFF64
2491 BFD_RELOC_X86_64_GOTPC32_TLSDESC
2493 BFD_RELOC_X86_64_TLSDESC_CALL
2495 BFD_RELOC_X86_64_TLSDESC
2497 x86-64/elf relocations
2500 BFD_RELOC_NS32K_IMM_8
2502 BFD_RELOC_NS32K_IMM_16
2504 BFD_RELOC_NS32K_IMM_32
2506 BFD_RELOC_NS32K_IMM_8_PCREL
2508 BFD_RELOC_NS32K_IMM_16_PCREL
2510 BFD_RELOC_NS32K_IMM_32_PCREL
2512 BFD_RELOC_NS32K_DISP_8
2514 BFD_RELOC_NS32K_DISP_16
2516 BFD_RELOC_NS32K_DISP_32
2518 BFD_RELOC_NS32K_DISP_8_PCREL
2520 BFD_RELOC_NS32K_DISP_16_PCREL
2522 BFD_RELOC_NS32K_DISP_32_PCREL
2527 BFD_RELOC_PDP11_DISP_8_PCREL
2529 BFD_RELOC_PDP11_DISP_6_PCREL
2534 BFD_RELOC_PJ_CODE_HI16
2536 BFD_RELOC_PJ_CODE_LO16
2538 BFD_RELOC_PJ_CODE_DIR16
2540 BFD_RELOC_PJ_CODE_DIR32
2542 BFD_RELOC_PJ_CODE_REL16
2544 BFD_RELOC_PJ_CODE_REL32
2546 Picojava relocs. Not all of these appear in object files.
2557 BFD_RELOC_PPC_B16_BRTAKEN
2559 BFD_RELOC_PPC_B16_BRNTAKEN
2563 BFD_RELOC_PPC_BA16_BRTAKEN
2565 BFD_RELOC_PPC_BA16_BRNTAKEN
2569 BFD_RELOC_PPC_GLOB_DAT
2571 BFD_RELOC_PPC_JMP_SLOT
2573 BFD_RELOC_PPC_RELATIVE
2575 BFD_RELOC_PPC_LOCAL24PC
2577 BFD_RELOC_PPC_EMB_NADDR32
2579 BFD_RELOC_PPC_EMB_NADDR16
2581 BFD_RELOC_PPC_EMB_NADDR16_LO
2583 BFD_RELOC_PPC_EMB_NADDR16_HI
2585 BFD_RELOC_PPC_EMB_NADDR16_HA
2587 BFD_RELOC_PPC_EMB_SDAI16
2589 BFD_RELOC_PPC_EMB_SDA2I16
2591 BFD_RELOC_PPC_EMB_SDA2REL
2593 BFD_RELOC_PPC_EMB_SDA21
2595 BFD_RELOC_PPC_EMB_MRKREF
2597 BFD_RELOC_PPC_EMB_RELSEC16
2599 BFD_RELOC_PPC_EMB_RELST_LO
2601 BFD_RELOC_PPC_EMB_RELST_HI
2603 BFD_RELOC_PPC_EMB_RELST_HA
2605 BFD_RELOC_PPC_EMB_BIT_FLD
2607 BFD_RELOC_PPC_EMB_RELSDA
2609 BFD_RELOC_PPC64_HIGHER
2611 BFD_RELOC_PPC64_HIGHER_S
2613 BFD_RELOC_PPC64_HIGHEST
2615 BFD_RELOC_PPC64_HIGHEST_S
2617 BFD_RELOC_PPC64_TOC16_LO
2619 BFD_RELOC_PPC64_TOC16_HI
2621 BFD_RELOC_PPC64_TOC16_HA
2625 BFD_RELOC_PPC64_PLTGOT16
2627 BFD_RELOC_PPC64_PLTGOT16_LO
2629 BFD_RELOC_PPC64_PLTGOT16_HI
2631 BFD_RELOC_PPC64_PLTGOT16_HA
2633 BFD_RELOC_PPC64_ADDR16_DS
2635 BFD_RELOC_PPC64_ADDR16_LO_DS
2637 BFD_RELOC_PPC64_GOT16_DS
2639 BFD_RELOC_PPC64_GOT16_LO_DS
2641 BFD_RELOC_PPC64_PLT16_LO_DS
2643 BFD_RELOC_PPC64_SECTOFF_DS
2645 BFD_RELOC_PPC64_SECTOFF_LO_DS
2647 BFD_RELOC_PPC64_TOC16_DS
2649 BFD_RELOC_PPC64_TOC16_LO_DS
2651 BFD_RELOC_PPC64_PLTGOT16_DS
2653 BFD_RELOC_PPC64_PLTGOT16_LO_DS
2655 Power(rs6000) and PowerPC relocations.
2660 BFD_RELOC_PPC_DTPMOD
2662 BFD_RELOC_PPC_TPREL16
2664 BFD_RELOC_PPC_TPREL16_LO
2666 BFD_RELOC_PPC_TPREL16_HI
2668 BFD_RELOC_PPC_TPREL16_HA
2672 BFD_RELOC_PPC_DTPREL16
2674 BFD_RELOC_PPC_DTPREL16_LO
2676 BFD_RELOC_PPC_DTPREL16_HI
2678 BFD_RELOC_PPC_DTPREL16_HA
2680 BFD_RELOC_PPC_DTPREL
2682 BFD_RELOC_PPC_GOT_TLSGD16
2684 BFD_RELOC_PPC_GOT_TLSGD16_LO
2686 BFD_RELOC_PPC_GOT_TLSGD16_HI
2688 BFD_RELOC_PPC_GOT_TLSGD16_HA
2690 BFD_RELOC_PPC_GOT_TLSLD16
2692 BFD_RELOC_PPC_GOT_TLSLD16_LO
2694 BFD_RELOC_PPC_GOT_TLSLD16_HI
2696 BFD_RELOC_PPC_GOT_TLSLD16_HA
2698 BFD_RELOC_PPC_GOT_TPREL16
2700 BFD_RELOC_PPC_GOT_TPREL16_LO
2702 BFD_RELOC_PPC_GOT_TPREL16_HI
2704 BFD_RELOC_PPC_GOT_TPREL16_HA
2706 BFD_RELOC_PPC_GOT_DTPREL16
2708 BFD_RELOC_PPC_GOT_DTPREL16_LO
2710 BFD_RELOC_PPC_GOT_DTPREL16_HI
2712 BFD_RELOC_PPC_GOT_DTPREL16_HA
2714 BFD_RELOC_PPC64_TPREL16_DS
2716 BFD_RELOC_PPC64_TPREL16_LO_DS
2718 BFD_RELOC_PPC64_TPREL16_HIGHER
2720 BFD_RELOC_PPC64_TPREL16_HIGHERA
2722 BFD_RELOC_PPC64_TPREL16_HIGHEST
2724 BFD_RELOC_PPC64_TPREL16_HIGHESTA
2726 BFD_RELOC_PPC64_DTPREL16_DS
2728 BFD_RELOC_PPC64_DTPREL16_LO_DS
2730 BFD_RELOC_PPC64_DTPREL16_HIGHER
2732 BFD_RELOC_PPC64_DTPREL16_HIGHERA
2734 BFD_RELOC_PPC64_DTPREL16_HIGHEST
2736 BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2738 PowerPC and PowerPC64 thread-local storage relocations.
2743 IBM 370/390 relocations
2748 The type of reloc used to build a constructor table - at the moment
2749 probably a 32 bit wide absolute relocation, but the target can choose.
2750 It generally does map to one of the other relocation types.
2753 BFD_RELOC_ARM_PCREL_BRANCH
2755 ARM 26 bit pc-relative branch. The lowest two bits must be zero and are
2756 not stored in the instruction.
2758 BFD_RELOC_ARM_PCREL_BLX
2760 ARM 26 bit pc-relative branch. The lowest bit must be zero and is
2761 not stored in the instruction. The 2nd lowest bit comes from a 1 bit
2762 field in the instruction.
2764 BFD_RELOC_THUMB_PCREL_BLX
2766 Thumb 22 bit pc-relative branch. The lowest bit must be zero and is
2767 not stored in the instruction. The 2nd lowest bit comes from a 1 bit
2768 field in the instruction.
2770 BFD_RELOC_ARM_PCREL_CALL
2772 ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
2774 BFD_RELOC_ARM_PCREL_JUMP
2776 ARM 26-bit pc-relative branch for B or conditional BL instruction.
2779 BFD_RELOC_THUMB_PCREL_BRANCH7
2781 BFD_RELOC_THUMB_PCREL_BRANCH9
2783 BFD_RELOC_THUMB_PCREL_BRANCH12
2785 BFD_RELOC_THUMB_PCREL_BRANCH20
2787 BFD_RELOC_THUMB_PCREL_BRANCH23
2789 BFD_RELOC_THUMB_PCREL_BRANCH25
2791 Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
2792 The lowest bit must be zero and is not stored in the instruction.
2793 Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
2794 "nn" one smaller in all cases. Note further that BRANCH23
2795 corresponds to R_ARM_THM_CALL.
2798 BFD_RELOC_ARM_OFFSET_IMM
2800 12-bit immediate offset, used in ARM-format ldr and str instructions.
2803 BFD_RELOC_ARM_THUMB_OFFSET
2805 5-bit immediate offset, used in Thumb-format ldr and str instructions.
2808 BFD_RELOC_ARM_TARGET1
2810 Pc-relative or absolute relocation depending on target. Used for
2811 entries in .init_array sections.
2813 BFD_RELOC_ARM_ROSEGREL32
2815 Read-only segment base relative address.
2817 BFD_RELOC_ARM_SBREL32
2819 Data segment base relative address.
2821 BFD_RELOC_ARM_TARGET2
2823 This reloc is used for references to RTTI data from exception handling
2824 tables. The actual definition depends on the target. It may be a
2825 pc-relative or some form of GOT-indirect relocation.
2827 BFD_RELOC_ARM_PREL31
2829 31-bit PC relative address.
2835 BFD_RELOC_ARM_MOVW_PCREL
2837 BFD_RELOC_ARM_MOVT_PCREL
2839 BFD_RELOC_ARM_THUMB_MOVW
2841 BFD_RELOC_ARM_THUMB_MOVT
2843 BFD_RELOC_ARM_THUMB_MOVW_PCREL
2845 BFD_RELOC_ARM_THUMB_MOVT_PCREL
2847 Low and High halfword relocations for MOVW and MOVT instructions.
2850 BFD_RELOC_ARM_JUMP_SLOT
2852 BFD_RELOC_ARM_GLOB_DAT
2858 BFD_RELOC_ARM_RELATIVE
2860 BFD_RELOC_ARM_GOTOFF
2864 Relocations for setting up GOTs and PLTs for shared libraries.
2867 BFD_RELOC_ARM_TLS_GD32
2869 BFD_RELOC_ARM_TLS_LDO32
2871 BFD_RELOC_ARM_TLS_LDM32
2873 BFD_RELOC_ARM_TLS_DTPOFF32
2875 BFD_RELOC_ARM_TLS_DTPMOD32
2877 BFD_RELOC_ARM_TLS_TPOFF32
2879 BFD_RELOC_ARM_TLS_IE32
2881 BFD_RELOC_ARM_TLS_LE32
2883 ARM thread-local storage relocations.
2886 BFD_RELOC_ARM_ALU_PC_G0_NC
2888 BFD_RELOC_ARM_ALU_PC_G0
2890 BFD_RELOC_ARM_ALU_PC_G1_NC
2892 BFD_RELOC_ARM_ALU_PC_G1
2894 BFD_RELOC_ARM_ALU_PC_G2
2896 BFD_RELOC_ARM_LDR_PC_G0
2898 BFD_RELOC_ARM_LDR_PC_G1
2900 BFD_RELOC_ARM_LDR_PC_G2
2902 BFD_RELOC_ARM_LDRS_PC_G0
2904 BFD_RELOC_ARM_LDRS_PC_G1
2906 BFD_RELOC_ARM_LDRS_PC_G2
2908 BFD_RELOC_ARM_LDC_PC_G0
2910 BFD_RELOC_ARM_LDC_PC_G1
2912 BFD_RELOC_ARM_LDC_PC_G2
2914 BFD_RELOC_ARM_ALU_SB_G0_NC
2916 BFD_RELOC_ARM_ALU_SB_G0
2918 BFD_RELOC_ARM_ALU_SB_G1_NC
2920 BFD_RELOC_ARM_ALU_SB_G1
2922 BFD_RELOC_ARM_ALU_SB_G2
2924 BFD_RELOC_ARM_LDR_SB_G0
2926 BFD_RELOC_ARM_LDR_SB_G1
2928 BFD_RELOC_ARM_LDR_SB_G2
2930 BFD_RELOC_ARM_LDRS_SB_G0
2932 BFD_RELOC_ARM_LDRS_SB_G1
2934 BFD_RELOC_ARM_LDRS_SB_G2
2936 BFD_RELOC_ARM_LDC_SB_G0
2938 BFD_RELOC_ARM_LDC_SB_G1
2940 BFD_RELOC_ARM_LDC_SB_G2
2942 ARM group relocations.
2947 Annotation of BX instructions.
2950 BFD_RELOC_ARM_IMMEDIATE
2952 BFD_RELOC_ARM_ADRL_IMMEDIATE
2954 BFD_RELOC_ARM_T32_IMMEDIATE
2956 BFD_RELOC_ARM_T32_ADD_IMM
2958 BFD_RELOC_ARM_T32_IMM12
2960 BFD_RELOC_ARM_T32_ADD_PC12
2962 BFD_RELOC_ARM_SHIFT_IMM
2970 BFD_RELOC_ARM_CP_OFF_IMM
2972 BFD_RELOC_ARM_CP_OFF_IMM_S2
2974 BFD_RELOC_ARM_T32_CP_OFF_IMM
2976 BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
2978 BFD_RELOC_ARM_ADR_IMM
2980 BFD_RELOC_ARM_LDR_IMM
2982 BFD_RELOC_ARM_LITERAL
2984 BFD_RELOC_ARM_IN_POOL
2986 BFD_RELOC_ARM_OFFSET_IMM8
2988 BFD_RELOC_ARM_T32_OFFSET_U8
2990 BFD_RELOC_ARM_T32_OFFSET_IMM
2992 BFD_RELOC_ARM_HWLITERAL
2994 BFD_RELOC_ARM_THUMB_ADD
2996 BFD_RELOC_ARM_THUMB_IMM
2998 BFD_RELOC_ARM_THUMB_SHIFT
3000 These relocs are only used within the ARM assembler. They are not
3001 (at present) written to any object files.
3004 BFD_RELOC_SH_PCDISP8BY2
3006 BFD_RELOC_SH_PCDISP12BY2
3014 BFD_RELOC_SH_DISP12BY2
3016 BFD_RELOC_SH_DISP12BY4
3018 BFD_RELOC_SH_DISP12BY8
3022 BFD_RELOC_SH_DISP20BY8
3026 BFD_RELOC_SH_IMM4BY2
3028 BFD_RELOC_SH_IMM4BY4
3032 BFD_RELOC_SH_IMM8BY2
3034 BFD_RELOC_SH_IMM8BY4
3036 BFD_RELOC_SH_PCRELIMM8BY2
3038 BFD_RELOC_SH_PCRELIMM8BY4
3040 BFD_RELOC_SH_SWITCH16
3042 BFD_RELOC_SH_SWITCH32
3056 BFD_RELOC_SH_LOOP_START
3058 BFD_RELOC_SH_LOOP_END
3062 BFD_RELOC_SH_GLOB_DAT
3064 BFD_RELOC_SH_JMP_SLOT
3066 BFD_RELOC_SH_RELATIVE
3070 BFD_RELOC_SH_GOT_LOW16
3072 BFD_RELOC_SH_GOT_MEDLOW16
3074 BFD_RELOC_SH_GOT_MEDHI16
3076 BFD_RELOC_SH_GOT_HI16
3078 BFD_RELOC_SH_GOTPLT_LOW16
3080 BFD_RELOC_SH_GOTPLT_MEDLOW16
3082 BFD_RELOC_SH_GOTPLT_MEDHI16
3084 BFD_RELOC_SH_GOTPLT_HI16
3086 BFD_RELOC_SH_PLT_LOW16
3088 BFD_RELOC_SH_PLT_MEDLOW16
3090 BFD_RELOC_SH_PLT_MEDHI16
3092 BFD_RELOC_SH_PLT_HI16
3094 BFD_RELOC_SH_GOTOFF_LOW16
3096 BFD_RELOC_SH_GOTOFF_MEDLOW16
3098 BFD_RELOC_SH_GOTOFF_MEDHI16
3100 BFD_RELOC_SH_GOTOFF_HI16
3102 BFD_RELOC_SH_GOTPC_LOW16
3104 BFD_RELOC_SH_GOTPC_MEDLOW16
3106 BFD_RELOC_SH_GOTPC_MEDHI16
3108 BFD_RELOC_SH_GOTPC_HI16
3112 BFD_RELOC_SH_GLOB_DAT64
3114 BFD_RELOC_SH_JMP_SLOT64
3116 BFD_RELOC_SH_RELATIVE64
3118 BFD_RELOC_SH_GOT10BY4
3120 BFD_RELOC_SH_GOT10BY8
3122 BFD_RELOC_SH_GOTPLT10BY4
3124 BFD_RELOC_SH_GOTPLT10BY8
3126 BFD_RELOC_SH_GOTPLT32
3128 BFD_RELOC_SH_SHMEDIA_CODE
3134 BFD_RELOC_SH_IMMS6BY32
3140 BFD_RELOC_SH_IMMS10BY2
3142 BFD_RELOC_SH_IMMS10BY4
3144 BFD_RELOC_SH_IMMS10BY8
3150 BFD_RELOC_SH_IMM_LOW16
3152 BFD_RELOC_SH_IMM_LOW16_PCREL
3154 BFD_RELOC_SH_IMM_MEDLOW16
3156 BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3158 BFD_RELOC_SH_IMM_MEDHI16
3160 BFD_RELOC_SH_IMM_MEDHI16_PCREL
3162 BFD_RELOC_SH_IMM_HI16
3164 BFD_RELOC_SH_IMM_HI16_PCREL
3168 BFD_RELOC_SH_TLS_GD_32
3170 BFD_RELOC_SH_TLS_LD_32
3172 BFD_RELOC_SH_TLS_LDO_32
3174 BFD_RELOC_SH_TLS_IE_32
3176 BFD_RELOC_SH_TLS_LE_32
3178 BFD_RELOC_SH_TLS_DTPMOD32
3180 BFD_RELOC_SH_TLS_DTPOFF32
3182 BFD_RELOC_SH_TLS_TPOFF32
3184 Renesas / SuperH SH relocs. Not all of these appear in object files.
3187 BFD_RELOC_ARC_B22_PCREL
3190 ARC 22 bit pc-relative branch. The lowest two bits must be zero and are
3191 not stored in the instruction. The high 20 bits are installed in bits 26
3192 through 7 of the instruction.
3196 ARC 26 bit absolute branch. The lowest two bits must be zero and are not
3197 stored in the instruction. The high 24 bits are installed in bits 23
3201 BFD_RELOC_BFIN_16_IMM
3203 ADI Blackfin 16 bit immediate absolute reloc.
3205 BFD_RELOC_BFIN_16_HIGH
3207 ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3209 BFD_RELOC_BFIN_4_PCREL
3211 ADI Blackfin 'a' part of LSETUP.
3213 BFD_RELOC_BFIN_5_PCREL
3217 BFD_RELOC_BFIN_16_LOW
3219 ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3221 BFD_RELOC_BFIN_10_PCREL
3225 BFD_RELOC_BFIN_11_PCREL
3227 ADI Blackfin 'b' part of LSETUP.
3229 BFD_RELOC_BFIN_12_PCREL_JUMP
3233 BFD_RELOC_BFIN_12_PCREL_JUMP_S
3235 ADI Blackfin Short jump, pcrel.
3237 BFD_RELOC_BFIN_24_PCREL_CALL_X
3239 ADI Blackfin Call.x not implemented.
3241 BFD_RELOC_BFIN_24_PCREL_JUMP_L
3243 ADI Blackfin Long Jump pcrel.
3245 BFD_RELOC_BFIN_GOT17M4
3247 BFD_RELOC_BFIN_GOTHI
3249 BFD_RELOC_BFIN_GOTLO
3251 BFD_RELOC_BFIN_FUNCDESC
3253 BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3255 BFD_RELOC_BFIN_FUNCDESC_GOTHI
3257 BFD_RELOC_BFIN_FUNCDESC_GOTLO
3259 BFD_RELOC_BFIN_FUNCDESC_VALUE
3261 BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3263 BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3265 BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3267 BFD_RELOC_BFIN_GOTOFF17M4
3269 BFD_RELOC_BFIN_GOTOFFHI
3271 BFD_RELOC_BFIN_GOTOFFLO
3273 ADI Blackfin FD-PIC relocations.
3277 ADI Blackfin GOT relocation.
3279 BFD_RELOC_BFIN_PLTPC
3281 ADI Blackfin PLTPC relocation.
3283 BFD_ARELOC_BFIN_PUSH
3285 ADI Blackfin arithmetic relocation.
3287 BFD_ARELOC_BFIN_CONST
3289 ADI Blackfin arithmetic relocation.
3293 ADI Blackfin arithmetic relocation.
3297 ADI Blackfin arithmetic relocation.
3299 BFD_ARELOC_BFIN_MULT
3301 ADI Blackfin arithmetic relocation.
3305 ADI Blackfin arithmetic relocation.
3309 ADI Blackfin arithmetic relocation.
3311 BFD_ARELOC_BFIN_LSHIFT
3313 ADI Blackfin arithmetic relocation.
3315 BFD_ARELOC_BFIN_RSHIFT
3317 ADI Blackfin arithmetic relocation.
3321 ADI Blackfin arithmetic relocation.
3325 ADI Blackfin arithmetic relocation.
3329 ADI Blackfin arithmetic relocation.
3331 BFD_ARELOC_BFIN_LAND
3333 ADI Blackfin arithmetic relocation.
3337 ADI Blackfin arithmetic relocation.
3341 ADI Blackfin arithmetic relocation.
3345 ADI Blackfin arithmetic relocation.
3347 BFD_ARELOC_BFIN_COMP
3349 ADI Blackfin arithmetic relocation.
3351 BFD_ARELOC_BFIN_PAGE
3353 ADI Blackfin arithmetic relocation.
3355 BFD_ARELOC_BFIN_HWPAGE
3357 ADI Blackfin arithmetic relocation.
3359 BFD_ARELOC_BFIN_ADDR
3361 ADI Blackfin arithmetic relocation.
3364 BFD_RELOC_D10V_10_PCREL_R
3366 Mitsubishi D10V relocs.
3367 This is a 10-bit reloc with the right 2 bits
3370 BFD_RELOC_D10V_10_PCREL_L
3372 Mitsubishi D10V relocs.
3373 This is a 10-bit reloc with the right 2 bits
3374 assumed to be 0. This is the same as the previous reloc
3375 except it is in the left container, i.e.,
3376 shifted left 15 bits.
3380 This is an 18-bit reloc with the right 2 bits
3383 BFD_RELOC_D10V_18_PCREL
3385 This is an 18-bit reloc with the right 2 bits
3391 Mitsubishi D30V relocs.
3392 This is a 6-bit absolute reloc.
3394 BFD_RELOC_D30V_9_PCREL
3396 This is a 6-bit pc-relative reloc with
3397 the right 3 bits assumed to be 0.
3399 BFD_RELOC_D30V_9_PCREL_R
3401 This is a 6-bit pc-relative reloc with
3402 the right 3 bits assumed to be 0. Same
3403 as the previous reloc but on the right side
3408 This is a 12-bit absolute reloc with the
3409 right 3 bitsassumed to be 0.
3411 BFD_RELOC_D30V_15_PCREL
3413 This is a 12-bit pc-relative reloc with
3414 the right 3 bits assumed to be 0.
3416 BFD_RELOC_D30V_15_PCREL_R
3418 This is a 12-bit pc-relative reloc with
3419 the right 3 bits assumed to be 0. Same
3420 as the previous reloc but on the right side
3425 This is an 18-bit absolute reloc with
3426 the right 3 bits assumed to be 0.
3428 BFD_RELOC_D30V_21_PCREL
3430 This is an 18-bit pc-relative reloc with
3431 the right 3 bits assumed to be 0.
3433 BFD_RELOC_D30V_21_PCREL_R
3435 This is an 18-bit pc-relative reloc with
3436 the right 3 bits assumed to be 0. Same
3437 as the previous reloc but on the right side
3442 This is a 32-bit absolute reloc.
3444 BFD_RELOC_D30V_32_PCREL
3446 This is a 32-bit pc-relative reloc.
3449 BFD_RELOC_DLX_HI16_S
3464 BFD_RELOC_M32C_RL_JUMP
3466 BFD_RELOC_M32C_RL_1ADDR
3468 BFD_RELOC_M32C_RL_2ADDR
3470 Renesas M16C/M32C Relocations.
3475 Renesas M32R (formerly Mitsubishi M32R) relocs.
3476 This is a 24 bit absolute address.
3478 BFD_RELOC_M32R_10_PCREL
3480 This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3482 BFD_RELOC_M32R_18_PCREL
3484 This is an 18-bit reloc with the right 2 bits assumed to be 0.
3486 BFD_RELOC_M32R_26_PCREL
3488 This is a 26-bit reloc with the right 2 bits assumed to be 0.
3490 BFD_RELOC_M32R_HI16_ULO
3492 This is a 16-bit reloc containing the high 16 bits of an address
3493 used when the lower 16 bits are treated as unsigned.
3495 BFD_RELOC_M32R_HI16_SLO
3497 This is a 16-bit reloc containing the high 16 bits of an address
3498 used when the lower 16 bits are treated as signed.
3502 This is a 16-bit reloc containing the lower 16 bits of an address.
3504 BFD_RELOC_M32R_SDA16
3506 This is a 16-bit reloc containing the small data area offset for use in
3507 add3, load, and store instructions.
3509 BFD_RELOC_M32R_GOT24
3511 BFD_RELOC_M32R_26_PLTREL
3515 BFD_RELOC_M32R_GLOB_DAT
3517 BFD_RELOC_M32R_JMP_SLOT
3519 BFD_RELOC_M32R_RELATIVE
3521 BFD_RELOC_M32R_GOTOFF
3523 BFD_RELOC_M32R_GOTOFF_HI_ULO
3525 BFD_RELOC_M32R_GOTOFF_HI_SLO
3527 BFD_RELOC_M32R_GOTOFF_LO
3529 BFD_RELOC_M32R_GOTPC24
3531 BFD_RELOC_M32R_GOT16_HI_ULO
3533 BFD_RELOC_M32R_GOT16_HI_SLO
3535 BFD_RELOC_M32R_GOT16_LO
3537 BFD_RELOC_M32R_GOTPC_HI_ULO
3539 BFD_RELOC_M32R_GOTPC_HI_SLO
3541 BFD_RELOC_M32R_GOTPC_LO
3547 BFD_RELOC_V850_9_PCREL
3549 This is a 9-bit reloc
3551 BFD_RELOC_V850_22_PCREL
3553 This is a 22-bit reloc
3556 BFD_RELOC_V850_SDA_16_16_OFFSET
3558 This is a 16 bit offset from the short data area pointer.
3560 BFD_RELOC_V850_SDA_15_16_OFFSET
3562 This is a 16 bit offset (of which only 15 bits are used) from the
3563 short data area pointer.
3565 BFD_RELOC_V850_ZDA_16_16_OFFSET
3567 This is a 16 bit offset from the zero data area pointer.
3569 BFD_RELOC_V850_ZDA_15_16_OFFSET
3571 This is a 16 bit offset (of which only 15 bits are used) from the
3572 zero data area pointer.
3574 BFD_RELOC_V850_TDA_6_8_OFFSET
3576 This is an 8 bit offset (of which only 6 bits are used) from the
3577 tiny data area pointer.
3579 BFD_RELOC_V850_TDA_7_8_OFFSET
3581 This is an 8bit offset (of which only 7 bits are used) from the tiny
3584 BFD_RELOC_V850_TDA_7_7_OFFSET
3586 This is a 7 bit offset from the tiny data area pointer.
3588 BFD_RELOC_V850_TDA_16_16_OFFSET
3590 This is a 16 bit offset from the tiny data area pointer.
3593 BFD_RELOC_V850_TDA_4_5_OFFSET
3595 This is a 5 bit offset (of which only 4 bits are used) from the tiny
3598 BFD_RELOC_V850_TDA_4_4_OFFSET
3600 This is a 4 bit offset from the tiny data area pointer.
3602 BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3604 This is a 16 bit offset from the short data area pointer, with the
3605 bits placed non-contiguously in the instruction.
3607 BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3609 This is a 16 bit offset from the zero data area pointer, with the
3610 bits placed non-contiguously in the instruction.
3612 BFD_RELOC_V850_CALLT_6_7_OFFSET
3614 This is a 6 bit offset from the call table base pointer.
3616 BFD_RELOC_V850_CALLT_16_16_OFFSET
3618 This is a 16 bit offset from the call table base pointer.
3620 BFD_RELOC_V850_LONGCALL
3622 Used for relaxing indirect function calls.
3624 BFD_RELOC_V850_LONGJUMP
3626 Used for relaxing indirect jumps.
3628 BFD_RELOC_V850_ALIGN
3630 Used to maintain alignment whilst relaxing.
3632 BFD_RELOC_V850_LO16_SPLIT_OFFSET
3634 This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3637 BFD_RELOC_MN10300_32_PCREL
3639 This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
3642 BFD_RELOC_MN10300_16_PCREL
3644 This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
3650 This is a 8bit DP reloc for the tms320c30, where the most
3651 significant 8 bits of a 24 bit word are placed into the least
3652 significant 8 bits of the opcode.
3655 BFD_RELOC_TIC54X_PARTLS7
3657 This is a 7bit reloc for the tms320c54x, where the least
3658 significant 7 bits of a 16 bit word are placed into the least
3659 significant 7 bits of the opcode.
3662 BFD_RELOC_TIC54X_PARTMS9
3664 This is a 9bit DP reloc for the tms320c54x, where the most
3665 significant 9 bits of a 16 bit word are placed into the least
3666 significant 9 bits of the opcode.
3671 This is an extended address 23-bit reloc for the tms320c54x.
3674 BFD_RELOC_TIC54X_16_OF_23
3676 This is a 16-bit reloc for the tms320c54x, where the least
3677 significant 16 bits of a 23-bit extended address are placed into
3681 BFD_RELOC_TIC54X_MS7_OF_23
3683 This is a reloc for the tms320c54x, where the most
3684 significant 7 bits of a 23-bit extended address are placed into
3690 This is a 48 bit reloc for the FR30 that stores 32 bits.
3694 This is a 32 bit reloc for the FR30 that stores 20 bits split up into
3697 BFD_RELOC_FR30_6_IN_4
3699 This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
3702 BFD_RELOC_FR30_8_IN_8
3704 This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
3707 BFD_RELOC_FR30_9_IN_8
3709 This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
3712 BFD_RELOC_FR30_10_IN_8
3714 This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
3717 BFD_RELOC_FR30_9_PCREL
3719 This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
3720 short offset into 8 bits.
3722 BFD_RELOC_FR30_12_PCREL
3724 This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
3725 short offset into 11 bits.
3728 BFD_RELOC_MCORE_PCREL_IMM8BY4
3730 BFD_RELOC_MCORE_PCREL_IMM11BY2
3732 BFD_RELOC_MCORE_PCREL_IMM4BY2
3734 BFD_RELOC_MCORE_PCREL_32
3736 BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
3740 Motorola Mcore relocations.
3749 BFD_RELOC_MEP_PCREL8A2
3751 BFD_RELOC_MEP_PCREL12A2
3753 BFD_RELOC_MEP_PCREL17A2
3755 BFD_RELOC_MEP_PCREL24A2
3757 BFD_RELOC_MEP_PCABS24A2
3769 BFD_RELOC_MEP_TPREL7
3771 BFD_RELOC_MEP_TPREL7A2
3773 BFD_RELOC_MEP_TPREL7A4
3775 BFD_RELOC_MEP_UIMM24
3777 BFD_RELOC_MEP_ADDR24A4
3779 BFD_RELOC_MEP_GNU_VTINHERIT
3781 BFD_RELOC_MEP_GNU_VTENTRY
3783 Toshiba Media Processor Relocations.
3789 BFD_RELOC_MMIX_GETA_1
3791 BFD_RELOC_MMIX_GETA_2
3793 BFD_RELOC_MMIX_GETA_3
3795 These are relocations for the GETA instruction.
3797 BFD_RELOC_MMIX_CBRANCH
3799 BFD_RELOC_MMIX_CBRANCH_J
3801 BFD_RELOC_MMIX_CBRANCH_1
3803 BFD_RELOC_MMIX_CBRANCH_2
3805 BFD_RELOC_MMIX_CBRANCH_3
3807 These are relocations for a conditional branch instruction.
3809 BFD_RELOC_MMIX_PUSHJ
3811 BFD_RELOC_MMIX_PUSHJ_1
3813 BFD_RELOC_MMIX_PUSHJ_2
3815 BFD_RELOC_MMIX_PUSHJ_3
3817 BFD_RELOC_MMIX_PUSHJ_STUBBABLE
3819 These are relocations for the PUSHJ instruction.
3823 BFD_RELOC_MMIX_JMP_1
3825 BFD_RELOC_MMIX_JMP_2
3827 BFD_RELOC_MMIX_JMP_3
3829 These are relocations for the JMP instruction.
3831 BFD_RELOC_MMIX_ADDR19
3833 This is a relocation for a relative address as in a GETA instruction or
3836 BFD_RELOC_MMIX_ADDR27
3838 This is a relocation for a relative address as in a JMP instruction.
3840 BFD_RELOC_MMIX_REG_OR_BYTE
3842 This is a relocation for an instruction field that may be a general
3843 register or a value 0..255.
3847 This is a relocation for an instruction field that may be a general
3850 BFD_RELOC_MMIX_BASE_PLUS_OFFSET
3852 This is a relocation for two instruction fields holding a register and
3853 an offset, the equivalent of the relocation.
3855 BFD_RELOC_MMIX_LOCAL
3857 This relocation is an assertion that the expression is not allocated as
3858 a global register. It does not modify contents.
3861 BFD_RELOC_AVR_7_PCREL
3863 This is a 16 bit reloc for the AVR that stores 8 bit pc relative
3864 short offset into 7 bits.
3866 BFD_RELOC_AVR_13_PCREL
3868 This is a 16 bit reloc for the AVR that stores 13 bit pc relative
3869 short offset into 12 bits.
3873 This is a 16 bit reloc for the AVR that stores 17 bit value (usually
3874 program memory address) into 16 bits.
3876 BFD_RELOC_AVR_LO8_LDI
3878 This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3879 data memory address) into 8 bit immediate value of LDI insn.
3881 BFD_RELOC_AVR_HI8_LDI
3883 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3884 of data memory address) into 8 bit immediate value of LDI insn.
3886 BFD_RELOC_AVR_HH8_LDI
3888 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3889 of program memory address) into 8 bit immediate value of LDI insn.
3891 BFD_RELOC_AVR_MS8_LDI
3893 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3894 of 32 bit value) into 8 bit immediate value of LDI insn.
3896 BFD_RELOC_AVR_LO8_LDI_NEG
3898 This is a 16 bit reloc for the AVR that stores negated 8 bit value
3899 (usually data memory address) into 8 bit immediate value of SUBI insn.
3901 BFD_RELOC_AVR_HI8_LDI_NEG
3903 This is a 16 bit reloc for the AVR that stores negated 8 bit value
3904 (high 8 bit of data memory address) into 8 bit immediate value of
3907 BFD_RELOC_AVR_HH8_LDI_NEG
3909 This is a 16 bit reloc for the AVR that stores negated 8 bit value
3910 (most high 8 bit of program memory address) into 8 bit immediate value
3911 of LDI or SUBI insn.
3913 BFD_RELOC_AVR_MS8_LDI_NEG
3915 This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
3916 of 32 bit value) into 8 bit immediate value of LDI insn.
3918 BFD_RELOC_AVR_LO8_LDI_PM
3920 This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3921 command address) into 8 bit immediate value of LDI insn.
3923 BFD_RELOC_AVR_LO8_LDI_GS
3925 This is a 16 bit reloc for the AVR that stores 8 bit value
3926 (command address) into 8 bit immediate value of LDI insn. If the address
3927 is beyond the 128k boundary, the linker inserts a jump stub for this reloc
3930 BFD_RELOC_AVR_HI8_LDI_PM
3932 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3933 of command address) into 8 bit immediate value of LDI insn.
3935 BFD_RELOC_AVR_HI8_LDI_GS
3937 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3938 of command address) into 8 bit immediate value of LDI insn. If the address
3939 is beyond the 128k boundary, the linker inserts a jump stub for this reloc
3942 BFD_RELOC_AVR_HH8_LDI_PM
3944 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3945 of command address) into 8 bit immediate value of LDI insn.
3947 BFD_RELOC_AVR_LO8_LDI_PM_NEG
3949 This is a 16 bit reloc for the AVR that stores negated 8 bit value
3950 (usually command address) into 8 bit immediate value of SUBI insn.
3952 BFD_RELOC_AVR_HI8_LDI_PM_NEG
3954 This is a 16 bit reloc for the AVR that stores negated 8 bit value
3955 (high 8 bit of 16 bit command address) into 8 bit immediate value
3958 BFD_RELOC_AVR_HH8_LDI_PM_NEG
3960 This is a 16 bit reloc for the AVR that stores negated 8 bit value
3961 (high 6 bit of 22 bit command address) into 8 bit immediate
3966 This is a 32 bit reloc for the AVR that stores 23 bit value
3971 This is a 16 bit reloc for the AVR that stores all needed bits
3972 for absolute addressing with ldi with overflow check to linktime
3976 This is a 6 bit reloc for the AVR that stores offset for ldd/std
3979 BFD_RELOC_AVR_6_ADIW
3981 This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
3995 32 bit PC relative PLT address.
3999 Copy symbol at runtime.
4001 BFD_RELOC_390_GLOB_DAT
4005 BFD_RELOC_390_JMP_SLOT
4009 BFD_RELOC_390_RELATIVE
4011 Adjust by program base.
4015 32 bit PC relative offset to GOT.
4021 BFD_RELOC_390_PC16DBL
4023 PC relative 16 bit shifted by 1.
4025 BFD_RELOC_390_PLT16DBL
4027 16 bit PC rel. PLT shifted by 1.
4029 BFD_RELOC_390_PC32DBL
4031 PC relative 32 bit shifted by 1.
4033 BFD_RELOC_390_PLT32DBL
4035 32 bit PC rel. PLT shifted by 1.
4037 BFD_RELOC_390_GOTPCDBL
4039 32 bit PC rel. GOT shifted by 1.
4047 64 bit PC relative PLT address.
4049 BFD_RELOC_390_GOTENT
4051 32 bit rel. offset to GOT entry.
4053 BFD_RELOC_390_GOTOFF64
4055 64 bit offset to GOT.
4057 BFD_RELOC_390_GOTPLT12
4059 12-bit offset to symbol-entry within GOT, with PLT handling.
4061 BFD_RELOC_390_GOTPLT16
4063 16-bit offset to symbol-entry within GOT, with PLT handling.
4065 BFD_RELOC_390_GOTPLT32
4067 32-bit offset to symbol-entry within GOT, with PLT handling.
4069 BFD_RELOC_390_GOTPLT64
4071 64-bit offset to symbol-entry within GOT, with PLT handling.
4073 BFD_RELOC_390_GOTPLTENT
4075 32-bit rel. offset to symbol-entry within GOT, with PLT handling.
4077 BFD_RELOC_390_PLTOFF16
4079 16-bit rel. offset from the GOT to a PLT entry.
4081 BFD_RELOC_390_PLTOFF32
4083 32-bit rel. offset from the GOT to a PLT entry.
4085 BFD_RELOC_390_PLTOFF64
4087 64-bit rel. offset from the GOT to a PLT entry.
4090 BFD_RELOC_390_TLS_LOAD
4092 BFD_RELOC_390_TLS_GDCALL
4094 BFD_RELOC_390_TLS_LDCALL
4096 BFD_RELOC_390_TLS_GD32
4098 BFD_RELOC_390_TLS_GD64
4100 BFD_RELOC_390_TLS_GOTIE12
4102 BFD_RELOC_390_TLS_GOTIE32
4104 BFD_RELOC_390_TLS_GOTIE64
4106 BFD_RELOC_390_TLS_LDM32
4108 BFD_RELOC_390_TLS_LDM64
4110 BFD_RELOC_390_TLS_IE32
4112 BFD_RELOC_390_TLS_IE64
4114 BFD_RELOC_390_TLS_IEENT
4116 BFD_RELOC_390_TLS_LE32
4118 BFD_RELOC_390_TLS_LE64
4120 BFD_RELOC_390_TLS_LDO32
4122 BFD_RELOC_390_TLS_LDO64
4124 BFD_RELOC_390_TLS_DTPMOD
4126 BFD_RELOC_390_TLS_DTPOFF
4128 BFD_RELOC_390_TLS_TPOFF
4130 s390 tls relocations.
4137 BFD_RELOC_390_GOTPLT20
4139 BFD_RELOC_390_TLS_GOTIE20
4141 Long displacement extension.
4144 BFD_RELOC_SCORE_DUMMY1
4148 BFD_RELOC_SCORE_GPREL15
4150 Low 16 bit for load/store
4152 BFD_RELOC_SCORE_DUMMY2
4156 This is a 24-bit reloc with the right 1 bit assumed to be 0
4158 BFD_RELOC_SCORE_BRANCH
4160 This is a 19-bit reloc with the right 1 bit assumed to be 0
4162 BFD_RELOC_SCORE16_JMP
4164 This is a 11-bit reloc with the right 1 bit assumed to be 0
4166 BFD_RELOC_SCORE16_BRANCH
4168 This is a 8-bit reloc with the right 1 bit assumed to be 0
4170 BFD_RELOC_SCORE_GOT15
4172 BFD_RELOC_SCORE_GOT_LO16
4174 BFD_RELOC_SCORE_CALL15
4176 BFD_RELOC_SCORE_DUMMY_HI16
4178 Undocumented Score relocs
4183 Scenix IP2K - 9-bit register number / data address
4187 Scenix IP2K - 4-bit register/data bank number
4189 BFD_RELOC_IP2K_ADDR16CJP
4191 Scenix IP2K - low 13 bits of instruction word address
4193 BFD_RELOC_IP2K_PAGE3
4195 Scenix IP2K - high 3 bits of instruction word address
4197 BFD_RELOC_IP2K_LO8DATA
4199 BFD_RELOC_IP2K_HI8DATA
4201 BFD_RELOC_IP2K_EX8DATA
4203 Scenix IP2K - ext/low/high 8 bits of data address
4205 BFD_RELOC_IP2K_LO8INSN
4207 BFD_RELOC_IP2K_HI8INSN
4209 Scenix IP2K - low/high 8 bits of instruction word address
4211 BFD_RELOC_IP2K_PC_SKIP
4213 Scenix IP2K - even/odd PC modifier to modify snb pcl.0
4217 Scenix IP2K - 16 bit word address in text section.
4219 BFD_RELOC_IP2K_FR_OFFSET
4221 Scenix IP2K - 7-bit sp or dp offset
4223 BFD_RELOC_VPE4KMATH_DATA
4225 BFD_RELOC_VPE4KMATH_INSN
4227 Scenix VPE4K coprocessor - data/insn-space addressing
4230 BFD_RELOC_VTABLE_INHERIT
4232 BFD_RELOC_VTABLE_ENTRY
4234 These two relocations are used by the linker to determine which of
4235 the entries in a C++ virtual function table are actually used. When
4236 the --gc-sections option is given, the linker will zero out the entries
4237 that are not used, so that the code for those functions need not be
4238 included in the output.
4240 VTABLE_INHERIT is a zero-space relocation used to describe to the
4241 linker the inheritance tree of a C++ virtual function table. The
4242 relocation's symbol should be the parent class' vtable, and the
4243 relocation should be located at the child vtable.
4245 VTABLE_ENTRY is a zero-space relocation that describes the use of a
4246 virtual function table entry. The reloc's symbol should refer to the
4247 table of the class mentioned in the code. Off of that base, an offset
4248 describes the entry that is being used. For Rela hosts, this offset
4249 is stored in the reloc's addend. For Rel hosts, we are forced to put
4250 this offset in the reloc's section offset.
4253 BFD_RELOC_IA64_IMM14
4255 BFD_RELOC_IA64_IMM22
4257 BFD_RELOC_IA64_IMM64
4259 BFD_RELOC_IA64_DIR32MSB
4261 BFD_RELOC_IA64_DIR32LSB
4263 BFD_RELOC_IA64_DIR64MSB
4265 BFD_RELOC_IA64_DIR64LSB
4267 BFD_RELOC_IA64_GPREL22
4269 BFD_RELOC_IA64_GPREL64I
4271 BFD_RELOC_IA64_GPREL32MSB
4273 BFD_RELOC_IA64_GPREL32LSB
4275 BFD_RELOC_IA64_GPREL64MSB
4277 BFD_RELOC_IA64_GPREL64LSB
4279 BFD_RELOC_IA64_LTOFF22
4281 BFD_RELOC_IA64_LTOFF64I
4283 BFD_RELOC_IA64_PLTOFF22
4285 BFD_RELOC_IA64_PLTOFF64I
4287 BFD_RELOC_IA64_PLTOFF64MSB
4289 BFD_RELOC_IA64_PLTOFF64LSB
4291 BFD_RELOC_IA64_FPTR64I
4293 BFD_RELOC_IA64_FPTR32MSB
4295 BFD_RELOC_IA64_FPTR32LSB
4297 BFD_RELOC_IA64_FPTR64MSB
4299 BFD_RELOC_IA64_FPTR64LSB
4301 BFD_RELOC_IA64_PCREL21B
4303 BFD_RELOC_IA64_PCREL21BI
4305 BFD_RELOC_IA64_PCREL21M
4307 BFD_RELOC_IA64_PCREL21F
4309 BFD_RELOC_IA64_PCREL22
4311 BFD_RELOC_IA64_PCREL60B
4313 BFD_RELOC_IA64_PCREL64I
4315 BFD_RELOC_IA64_PCREL32MSB
4317 BFD_RELOC_IA64_PCREL32LSB
4319 BFD_RELOC_IA64_PCREL64MSB
4321 BFD_RELOC_IA64_PCREL64LSB
4323 BFD_RELOC_IA64_LTOFF_FPTR22
4325 BFD_RELOC_IA64_LTOFF_FPTR64I
4327 BFD_RELOC_IA64_LTOFF_FPTR32MSB
4329 BFD_RELOC_IA64_LTOFF_FPTR32LSB
4331 BFD_RELOC_IA64_LTOFF_FPTR64MSB
4333 BFD_RELOC_IA64_LTOFF_FPTR64LSB
4335 BFD_RELOC_IA64_SEGREL32MSB
4337 BFD_RELOC_IA64_SEGREL32LSB
4339 BFD_RELOC_IA64_SEGREL64MSB
4341 BFD_RELOC_IA64_SEGREL64LSB
4343 BFD_RELOC_IA64_SECREL32MSB
4345 BFD_RELOC_IA64_SECREL32LSB
4347 BFD_RELOC_IA64_SECREL64MSB
4349 BFD_RELOC_IA64_SECREL64LSB
4351 BFD_RELOC_IA64_REL32MSB
4353 BFD_RELOC_IA64_REL32LSB
4355 BFD_RELOC_IA64_REL64MSB
4357 BFD_RELOC_IA64_REL64LSB
4359 BFD_RELOC_IA64_LTV32MSB
4361 BFD_RELOC_IA64_LTV32LSB
4363 BFD_RELOC_IA64_LTV64MSB
4365 BFD_RELOC_IA64_LTV64LSB
4367 BFD_RELOC_IA64_IPLTMSB
4369 BFD_RELOC_IA64_IPLTLSB
4373 BFD_RELOC_IA64_LTOFF22X
4375 BFD_RELOC_IA64_LDXMOV
4377 BFD_RELOC_IA64_TPREL14
4379 BFD_RELOC_IA64_TPREL22
4381 BFD_RELOC_IA64_TPREL64I
4383 BFD_RELOC_IA64_TPREL64MSB
4385 BFD_RELOC_IA64_TPREL64LSB
4387 BFD_RELOC_IA64_LTOFF_TPREL22
4389 BFD_RELOC_IA64_DTPMOD64MSB
4391 BFD_RELOC_IA64_DTPMOD64LSB
4393 BFD_RELOC_IA64_LTOFF_DTPMOD22
4395 BFD_RELOC_IA64_DTPREL14
4397 BFD_RELOC_IA64_DTPREL22
4399 BFD_RELOC_IA64_DTPREL64I
4401 BFD_RELOC_IA64_DTPREL32MSB
4403 BFD_RELOC_IA64_DTPREL32LSB
4405 BFD_RELOC_IA64_DTPREL64MSB
4407 BFD_RELOC_IA64_DTPREL64LSB
4409 BFD_RELOC_IA64_LTOFF_DTPREL22
4411 Intel IA64 Relocations.
4414 BFD_RELOC_M68HC11_HI8
4416 Motorola 68HC11 reloc.
4417 This is the 8 bit high part of an absolute address.
4419 BFD_RELOC_M68HC11_LO8
4421 Motorola 68HC11 reloc.
4422 This is the 8 bit low part of an absolute address.
4424 BFD_RELOC_M68HC11_3B
4426 Motorola 68HC11 reloc.
4427 This is the 3 bit of a value.
4429 BFD_RELOC_M68HC11_RL_JUMP
4431 Motorola 68HC11 reloc.
4432 This reloc marks the beginning of a jump/call instruction.
4433 It is used for linker relaxation to correctly identify beginning
4434 of instruction and change some branches to use PC-relative
4437 BFD_RELOC_M68HC11_RL_GROUP
4439 Motorola 68HC11 reloc.
4440 This reloc marks a group of several instructions that gcc generates
4441 and for which the linker relaxation pass can modify and/or remove
4444 BFD_RELOC_M68HC11_LO16
4446 Motorola 68HC11 reloc.
4447 This is the 16-bit lower part of an address. It is used for 'call'
4448 instruction to specify the symbol address without any special
4449 transformation (due to memory bank window).
4451 BFD_RELOC_M68HC11_PAGE
4453 Motorola 68HC11 reloc.
4454 This is a 8-bit reloc that specifies the page number of an address.
4455 It is used by 'call' instruction to specify the page number of
4458 BFD_RELOC_M68HC11_24
4460 Motorola 68HC11 reloc.
4461 This is a 24-bit reloc that represents the address with a 16-bit
4462 value and a 8-bit page number. The symbol address is transformed
4463 to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
4465 BFD_RELOC_M68HC12_5B
4467 Motorola 68HC12 reloc.
4468 This is the 5 bits of a value.
4473 BFD_RELOC_16C_NUM08_C
4477 BFD_RELOC_16C_NUM16_C
4481 BFD_RELOC_16C_NUM32_C
4483 BFD_RELOC_16C_DISP04
4485 BFD_RELOC_16C_DISP04_C
4487 BFD_RELOC_16C_DISP08
4489 BFD_RELOC_16C_DISP08_C
4491 BFD_RELOC_16C_DISP16
4493 BFD_RELOC_16C_DISP16_C
4495 BFD_RELOC_16C_DISP24
4497 BFD_RELOC_16C_DISP24_C
4499 BFD_RELOC_16C_DISP24a
4501 BFD_RELOC_16C_DISP24a_C
4505 BFD_RELOC_16C_REG04_C
4507 BFD_RELOC_16C_REG04a
4509 BFD_RELOC_16C_REG04a_C
4513 BFD_RELOC_16C_REG14_C
4517 BFD_RELOC_16C_REG16_C
4521 BFD_RELOC_16C_REG20_C
4525 BFD_RELOC_16C_ABS20_C
4529 BFD_RELOC_16C_ABS24_C
4533 BFD_RELOC_16C_IMM04_C
4537 BFD_RELOC_16C_IMM16_C
4541 BFD_RELOC_16C_IMM20_C
4545 BFD_RELOC_16C_IMM24_C
4549 BFD_RELOC_16C_IMM32_C
4551 NS CR16C Relocations.
4556 BFD_RELOC_CR16_NUM16
4558 BFD_RELOC_CR16_NUM32
4560 BFD_RELOC_CR16_NUM32a
4562 BFD_RELOC_CR16_REGREL0
4564 BFD_RELOC_CR16_REGREL4
4566 BFD_RELOC_CR16_REGREL4a
4568 BFD_RELOC_CR16_REGREL14
4570 BFD_RELOC_CR16_REGREL14a
4572 BFD_RELOC_CR16_REGREL16
4574 BFD_RELOC_CR16_REGREL20
4576 BFD_RELOC_CR16_REGREL20a
4578 BFD_RELOC_CR16_ABS20
4580 BFD_RELOC_CR16_ABS24
4586 BFD_RELOC_CR16_IMM16
4588 BFD_RELOC_CR16_IMM20
4590 BFD_RELOC_CR16_IMM24
4592 BFD_RELOC_CR16_IMM32
4594 BFD_RELOC_CR16_IMM32a
4596 BFD_RELOC_CR16_DISP4
4598 BFD_RELOC_CR16_DISP8
4600 BFD_RELOC_CR16_DISP16
4602 BFD_RELOC_CR16_DISP20
4604 BFD_RELOC_CR16_DISP24
4606 BFD_RELOC_CR16_DISP24a
4608 BFD_RELOC_CR16_SWITCH8
4610 BFD_RELOC_CR16_SWITCH16
4612 BFD_RELOC_CR16_SWITCH32
4614 BFD_RELOC_CR16_GOT_REGREL20
4616 BFD_RELOC_CR16_GOTC_REGREL20
4618 BFD_RELOC_CR16_GLOB_DAT
4620 NS CR16 Relocations.
4627 BFD_RELOC_CRX_REL8_CMP
4635 BFD_RELOC_CRX_REGREL12
4637 BFD_RELOC_CRX_REGREL22
4639 BFD_RELOC_CRX_REGREL28
4641 BFD_RELOC_CRX_REGREL32
4657 BFD_RELOC_CRX_SWITCH8
4659 BFD_RELOC_CRX_SWITCH16
4661 BFD_RELOC_CRX_SWITCH32
4666 BFD_RELOC_CRIS_BDISP8
4668 BFD_RELOC_CRIS_UNSIGNED_5
4670 BFD_RELOC_CRIS_SIGNED_6
4672 BFD_RELOC_CRIS_UNSIGNED_6
4674 BFD_RELOC_CRIS_SIGNED_8
4676 BFD_RELOC_CRIS_UNSIGNED_8
4678 BFD_RELOC_CRIS_SIGNED_16
4680 BFD_RELOC_CRIS_UNSIGNED_16
4682 BFD_RELOC_CRIS_LAPCQ_OFFSET
4684 BFD_RELOC_CRIS_UNSIGNED_4
4686 These relocs are only used within the CRIS assembler. They are not
4687 (at present) written to any object files.
4691 BFD_RELOC_CRIS_GLOB_DAT
4693 BFD_RELOC_CRIS_JUMP_SLOT
4695 BFD_RELOC_CRIS_RELATIVE
4697 Relocs used in ELF shared libraries for CRIS.
4699 BFD_RELOC_CRIS_32_GOT
4701 32-bit offset to symbol-entry within GOT.
4703 BFD_RELOC_CRIS_16_GOT
4705 16-bit offset to symbol-entry within GOT.
4707 BFD_RELOC_CRIS_32_GOTPLT
4709 32-bit offset to symbol-entry within GOT, with PLT handling.
4711 BFD_RELOC_CRIS_16_GOTPLT
4713 16-bit offset to symbol-entry within GOT, with PLT handling.
4715 BFD_RELOC_CRIS_32_GOTREL
4717 32-bit offset to symbol, relative to GOT.
4719 BFD_RELOC_CRIS_32_PLT_GOTREL
4721 32-bit offset to symbol with PLT entry, relative to GOT.
4723 BFD_RELOC_CRIS_32_PLT_PCREL
4725 32-bit offset to symbol with PLT entry, relative to this relocation.
4728 BFD_RELOC_CRIS_32_GOT_GD
4730 BFD_RELOC_CRIS_16_GOT_GD
4732 BFD_RELOC_CRIS_32_GD
4736 BFD_RELOC_CRIS_32_DTPREL
4738 BFD_RELOC_CRIS_16_DTPREL
4740 BFD_RELOC_CRIS_32_GOT_TPREL
4742 BFD_RELOC_CRIS_16_GOT_TPREL
4744 BFD_RELOC_CRIS_32_TPREL
4746 BFD_RELOC_CRIS_16_TPREL
4748 BFD_RELOC_CRIS_DTPMOD
4750 Relocs used in TLS code for CRIS.
4755 BFD_RELOC_860_GLOB_DAT
4757 BFD_RELOC_860_JUMP_SLOT
4759 BFD_RELOC_860_RELATIVE
4769 BFD_RELOC_860_SPLIT0
4773 BFD_RELOC_860_SPLIT1
4777 BFD_RELOC_860_SPLIT2
4781 BFD_RELOC_860_LOGOT0
4783 BFD_RELOC_860_SPGOT0
4785 BFD_RELOC_860_LOGOT1
4787 BFD_RELOC_860_SPGOT1
4789 BFD_RELOC_860_LOGOTOFF0
4791 BFD_RELOC_860_SPGOTOFF0
4793 BFD_RELOC_860_LOGOTOFF1
4795 BFD_RELOC_860_SPGOTOFF1
4797 BFD_RELOC_860_LOGOTOFF2
4799 BFD_RELOC_860_LOGOTOFF3
4803 BFD_RELOC_860_HIGHADJ
4807 BFD_RELOC_860_HAGOTOFF
4815 BFD_RELOC_860_HIGOTOFF
4817 Intel i860 Relocations.
4820 BFD_RELOC_OPENRISC_ABS_26
4822 BFD_RELOC_OPENRISC_REL_26
4824 OpenRISC Relocations.
4827 BFD_RELOC_H8_DIR16A8
4829 BFD_RELOC_H8_DIR16R8
4831 BFD_RELOC_H8_DIR24A8
4833 BFD_RELOC_H8_DIR24R8
4835 BFD_RELOC_H8_DIR32A16
4840 BFD_RELOC_XSTORMY16_REL_12
4842 BFD_RELOC_XSTORMY16_12
4844 BFD_RELOC_XSTORMY16_24
4846 BFD_RELOC_XSTORMY16_FPTR16
4848 Sony Xstormy16 Relocations.
4853 Self-describing complex relocations.
4865 Infineon Relocations.
4868 BFD_RELOC_VAX_GLOB_DAT
4870 BFD_RELOC_VAX_JMP_SLOT
4872 BFD_RELOC_VAX_RELATIVE
4874 Relocations used by VAX ELF.
4879 Morpho MT - 16 bit immediate relocation.
4883 Morpho MT - Hi 16 bits of an address.
4887 Morpho MT - Low 16 bits of an address.
4889 BFD_RELOC_MT_GNU_VTINHERIT
4891 Morpho MT - Used to tell the linker which vtable entries are used.
4893 BFD_RELOC_MT_GNU_VTENTRY
4895 Morpho MT - Used to tell the linker which vtable entries are used.
4897 BFD_RELOC_MT_PCINSN8
4899 Morpho MT - 8 bit immediate relocation.
4902 BFD_RELOC_MSP430_10_PCREL
4904 BFD_RELOC_MSP430_16_PCREL
4908 BFD_RELOC_MSP430_16_PCREL_BYTE
4910 BFD_RELOC_MSP430_16_BYTE
4912 BFD_RELOC_MSP430_2X_PCREL
4914 BFD_RELOC_MSP430_RL_PCREL
4916 msp430 specific relocation codes
4919 BFD_RELOC_IQ2000_OFFSET_16
4921 BFD_RELOC_IQ2000_OFFSET_21
4923 BFD_RELOC_IQ2000_UHI16
4928 BFD_RELOC_XTENSA_RTLD
4930 Special Xtensa relocation used only by PLT entries in ELF shared
4931 objects to indicate that the runtime linker should set the value
4932 to one of its own internal functions or data structures.
4934 BFD_RELOC_XTENSA_GLOB_DAT
4936 BFD_RELOC_XTENSA_JMP_SLOT
4938 BFD_RELOC_XTENSA_RELATIVE
4940 Xtensa relocations for ELF shared objects.
4942 BFD_RELOC_XTENSA_PLT
4944 Xtensa relocation used in ELF object files for symbols that may require
4945 PLT entries. Otherwise, this is just a generic 32-bit relocation.
4947 BFD_RELOC_XTENSA_DIFF8
4949 BFD_RELOC_XTENSA_DIFF16
4951 BFD_RELOC_XTENSA_DIFF32
4953 Xtensa relocations to mark the difference of two local symbols.
4954 These are only needed to support linker relaxation and can be ignored
4955 when not relaxing. The field is set to the value of the difference
4956 assuming no relaxation. The relocation encodes the position of the
4957 first symbol so the linker can determine whether to adjust the field
4960 BFD_RELOC_XTENSA_SLOT0_OP
4962 BFD_RELOC_XTENSA_SLOT1_OP
4964 BFD_RELOC_XTENSA_SLOT2_OP
4966 BFD_RELOC_XTENSA_SLOT3_OP
4968 BFD_RELOC_XTENSA_SLOT4_OP
4970 BFD_RELOC_XTENSA_SLOT5_OP
4972 BFD_RELOC_XTENSA_SLOT6_OP
4974 BFD_RELOC_XTENSA_SLOT7_OP
4976 BFD_RELOC_XTENSA_SLOT8_OP
4978 BFD_RELOC_XTENSA_SLOT9_OP
4980 BFD_RELOC_XTENSA_SLOT10_OP
4982 BFD_RELOC_XTENSA_SLOT11_OP
4984 BFD_RELOC_XTENSA_SLOT12_OP
4986 BFD_RELOC_XTENSA_SLOT13_OP
4988 BFD_RELOC_XTENSA_SLOT14_OP
4990 Generic Xtensa relocations for instruction operands. Only the slot
4991 number is encoded in the relocation. The relocation applies to the
4992 last PC-relative immediate operand, or if there are no PC-relative
4993 immediates, to the last immediate operand.
4995 BFD_RELOC_XTENSA_SLOT0_ALT
4997 BFD_RELOC_XTENSA_SLOT1_ALT
4999 BFD_RELOC_XTENSA_SLOT2_ALT
5001 BFD_RELOC_XTENSA_SLOT3_ALT
5003 BFD_RELOC_XTENSA_SLOT4_ALT
5005 BFD_RELOC_XTENSA_SLOT5_ALT
5007 BFD_RELOC_XTENSA_SLOT6_ALT
5009 BFD_RELOC_XTENSA_SLOT7_ALT
5011 BFD_RELOC_XTENSA_SLOT8_ALT
5013 BFD_RELOC_XTENSA_SLOT9_ALT
5015 BFD_RELOC_XTENSA_SLOT10_ALT
5017 BFD_RELOC_XTENSA_SLOT11_ALT
5019 BFD_RELOC_XTENSA_SLOT12_ALT
5021 BFD_RELOC_XTENSA_SLOT13_ALT
5023 BFD_RELOC_XTENSA_SLOT14_ALT
5025 Alternate Xtensa relocations. Only the slot is encoded in the
5026 relocation. The meaning of these relocations is opcode-specific.
5028 BFD_RELOC_XTENSA_OP0
5030 BFD_RELOC_XTENSA_OP1
5032 BFD_RELOC_XTENSA_OP2
5034 Xtensa relocations for backward compatibility. These have all been
5035 replaced by BFD_RELOC_XTENSA_SLOT0_OP.
5037 BFD_RELOC_XTENSA_ASM_EXPAND
5039 Xtensa relocation to mark that the assembler expanded the
5040 instructions from an original target. The expansion size is
5041 encoded in the reloc size.
5043 BFD_RELOC_XTENSA_ASM_SIMPLIFY
5045 Xtensa relocation to mark that the linker should simplify
5046 assembler-expanded instructions. This is commonly used
5047 internally by the linker after analysis of a
5048 BFD_RELOC_XTENSA_ASM_EXPAND.
5050 BFD_RELOC_XTENSA_TLSDESC_FN
5052 BFD_RELOC_XTENSA_TLSDESC_ARG
5054 BFD_RELOC_XTENSA_TLS_DTPOFF
5056 BFD_RELOC_XTENSA_TLS_TPOFF
5058 BFD_RELOC_XTENSA_TLS_FUNC
5060 BFD_RELOC_XTENSA_TLS_ARG
5062 BFD_RELOC_XTENSA_TLS_CALL
5064 Xtensa TLS relocations.
5069 8 bit signed offset in (ix+d) or (iy+d).
5088 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
5093 bfd_reloc_type_lookup
5094 bfd_reloc_name_lookup
5097 reloc_howto_type *bfd_reloc_type_lookup
5098 (bfd *abfd, bfd_reloc_code_real_type code);
5099 reloc_howto_type *bfd_reloc_name_lookup
5100 (bfd *abfd, const char *reloc_name);
5103 Return a pointer to a howto structure which, when
5104 invoked, will perform the relocation @var{code} on data from the
5110 bfd_reloc_type_lookup (bfd
*abfd
, bfd_reloc_code_real_type code
)
5112 return BFD_SEND (abfd
, reloc_type_lookup
, (abfd
, code
));
5116 bfd_reloc_name_lookup (bfd
*abfd
, const char *reloc_name
)
5118 return BFD_SEND (abfd
, reloc_name_lookup
, (abfd
, reloc_name
));
5121 static reloc_howto_type bfd_howto_32
=
5122 HOWTO (0, 00, 2, 32, FALSE
, 0, complain_overflow_dont
, 0, "VRT32", FALSE
, 0xffffffff, 0xffffffff, TRUE
);
5126 bfd_default_reloc_type_lookup
5129 reloc_howto_type *bfd_default_reloc_type_lookup
5130 (bfd *abfd, bfd_reloc_code_real_type code);
5133 Provides a default relocation lookup routine for any architecture.
5138 bfd_default_reloc_type_lookup (bfd
*abfd
, bfd_reloc_code_real_type code
)
5142 case BFD_RELOC_CTOR
:
5143 /* The type of reloc used in a ctor, which will be as wide as the
5144 address - so either a 64, 32, or 16 bitter. */
5145 switch (bfd_get_arch_info (abfd
)->bits_per_address
)
5150 return &bfd_howto_32
;
5164 bfd_get_reloc_code_name
5167 const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
5170 Provides a printable name for the supplied relocation code.
5171 Useful mainly for printing error messages.
5175 bfd_get_reloc_code_name (bfd_reloc_code_real_type code
)
5177 if (code
> BFD_RELOC_UNUSED
)
5179 return bfd_reloc_code_real_names
[code
];
5184 bfd_generic_relax_section
5187 bfd_boolean bfd_generic_relax_section
5190 struct bfd_link_info *,
5194 Provides default handling for relaxing for back ends which
5199 bfd_generic_relax_section (bfd
*abfd ATTRIBUTE_UNUSED
,
5200 asection
*section ATTRIBUTE_UNUSED
,
5201 struct bfd_link_info
*link_info ATTRIBUTE_UNUSED
,
5210 bfd_generic_gc_sections
5213 bfd_boolean bfd_generic_gc_sections
5214 (bfd *, struct bfd_link_info *);
5217 Provides default handling for relaxing for back ends which
5218 don't do section gc -- i.e., does nothing.
5222 bfd_generic_gc_sections (bfd
*abfd ATTRIBUTE_UNUSED
,
5223 struct bfd_link_info
*info ATTRIBUTE_UNUSED
)
5230 bfd_generic_merge_sections
5233 bfd_boolean bfd_generic_merge_sections
5234 (bfd *, struct bfd_link_info *);
5237 Provides default handling for SEC_MERGE section merging for back ends
5238 which don't have SEC_MERGE support -- i.e., does nothing.
5242 bfd_generic_merge_sections (bfd
*abfd ATTRIBUTE_UNUSED
,
5243 struct bfd_link_info
*link_info ATTRIBUTE_UNUSED
)
5250 bfd_generic_get_relocated_section_contents
5253 bfd_byte *bfd_generic_get_relocated_section_contents
5255 struct bfd_link_info *link_info,
5256 struct bfd_link_order *link_order,
5258 bfd_boolean relocatable,
5262 Provides default handling of relocation effort for back ends
5263 which can't be bothered to do it efficiently.
5268 bfd_generic_get_relocated_section_contents (bfd
*abfd
,
5269 struct bfd_link_info
*link_info
,
5270 struct bfd_link_order
*link_order
,
5272 bfd_boolean relocatable
,
5275 bfd
*input_bfd
= link_order
->u
.indirect
.section
->owner
;
5276 asection
*input_section
= link_order
->u
.indirect
.section
;
5278 arelent
**reloc_vector
;
5282 reloc_size
= bfd_get_reloc_upper_bound (input_bfd
, input_section
);
5286 /* Read in the section. */
5287 sz
= input_section
->rawsize
? input_section
->rawsize
: input_section
->size
;
5288 if (!bfd_get_section_contents (input_bfd
, input_section
, data
, 0, sz
))
5291 if (reloc_size
== 0)
5294 reloc_vector
= bfd_malloc (reloc_size
);
5295 if (reloc_vector
== NULL
)
5298 reloc_count
= bfd_canonicalize_reloc (input_bfd
,
5302 if (reloc_count
< 0)
5305 if (reloc_count
> 0)
5308 for (parent
= reloc_vector
; *parent
!= NULL
; parent
++)
5310 char *error_message
= NULL
;
5312 bfd_reloc_status_type r
;
5314 symbol
= *(*parent
)->sym_ptr_ptr
;
5315 if (symbol
->section
&& elf_discarded_section (symbol
->section
))
5318 static reloc_howto_type none_howto
5319 = HOWTO (0, 0, 0, 0, FALSE
, 0, complain_overflow_dont
, NULL
,
5320 "unused", FALSE
, 0, 0, FALSE
);
5322 p
= data
+ (*parent
)->address
* bfd_octets_per_byte (input_bfd
);
5323 _bfd_clear_contents ((*parent
)->howto
, input_bfd
, p
);
5324 (*parent
)->sym_ptr_ptr
= bfd_abs_section
.symbol_ptr_ptr
;
5325 (*parent
)->addend
= 0;
5326 (*parent
)->howto
= &none_howto
;
5330 r
= bfd_perform_relocation (input_bfd
,
5334 relocatable
? abfd
: NULL
,
5339 asection
*os
= input_section
->output_section
;
5341 /* A partial link, so keep the relocs. */
5342 os
->orelocation
[os
->reloc_count
] = *parent
;
5346 if (r
!= bfd_reloc_ok
)
5350 case bfd_reloc_undefined
:
5351 if (!((*link_info
->callbacks
->undefined_symbol
)
5352 (link_info
, bfd_asymbol_name (*(*parent
)->sym_ptr_ptr
),
5353 input_bfd
, input_section
, (*parent
)->address
,
5357 case bfd_reloc_dangerous
:
5358 BFD_ASSERT (error_message
!= NULL
);
5359 if (!((*link_info
->callbacks
->reloc_dangerous
)
5360 (link_info
, error_message
, input_bfd
, input_section
,
5361 (*parent
)->address
)))
5364 case bfd_reloc_overflow
:
5365 if (!((*link_info
->callbacks
->reloc_overflow
)
5367 bfd_asymbol_name (*(*parent
)->sym_ptr_ptr
),
5368 (*parent
)->howto
->name
, (*parent
)->addend
,
5369 input_bfd
, input_section
, (*parent
)->address
)))
5372 case bfd_reloc_outofrange
:
5382 free (reloc_vector
);
5386 free (reloc_vector
);