bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001, 2002, 2003, 2004, 2005, 2006
   4    Free Software Foundation, Inc.
   5    Written by Cygnus Support.
   6
   7    This file is part of BFD, the Binary File Descriptor library.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 2 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program; if not, write to the Free Software
  21    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
  22
  23 /*
  24 SECTION
  25         Relocations
  26
  27         BFD maintains relocations in much the same way it maintains
  28         symbols: they are left alone until required, then read in
  29         en-masse and translated into an internal form.  A common
  30         routine <<bfd_perform_relocation>> acts upon the
  31         canonical form to do the fixup.
  32
  33         Relocations are maintained on a per section basis,
  34         while symbols are maintained on a per BFD basis.
  35
  36         All that a back end has to do to fit the BFD interface is to create
  37         a <<struct reloc_cache_entry>> for each relocation
  38         in a particular section, and fill in the right bits of the structures.
  39
  40 @menu
  41 @* typedef arelent::
  42 @* howto manager::
  43 @end menu
  44
  45 */
  46
  47 /* DO compile in the reloc_code name table from libbfd.h.  */
  48 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  49
  50 #include "bfd.h"
  51 #include "sysdep.h"
  52 #include "bfdlink.h"
  53 #include "libbfd.h"
  54 /*
  55 DOCDD
  56 INODE
  57         typedef arelent, howto manager, Relocations, Relocations
  58
  59 SUBSECTION
  60         typedef arelent
  61
  62         This is the structure of a relocation entry:
  63
  64 CODE_FRAGMENT
  65 .
  66 .typedef enum bfd_reloc_status
  67 .{
  68 .  {* No errors detected.  *}
  69 .  bfd_reloc_ok,
  70 .
  71 .  {* The relocation was performed, but there was an overflow.  *}
  72 .  bfd_reloc_overflow,
  73 .
  74 .  {* The address to relocate was not within the section supplied.  *}
  75 .  bfd_reloc_outofrange,
  76 .
  77 .  {* Used by special functions.  *}
  78 .  bfd_reloc_continue,
  79 .
  80 .  {* Unsupported relocation size requested.  *}
  81 .  bfd_reloc_notsupported,
  82 .
  83 .  {* Unused.  *}
  84 .  bfd_reloc_other,
  85 .
  86 .  {* The symbol to relocate against was undefined.  *}
  87 .  bfd_reloc_undefined,
  88 .
  89 .  {* The relocation was performed, but may not be ok - presently
  90 .     generated only when linking i960 coff files with i960 b.out
  91 .     symbols.  If this type is returned, the error_message argument
  92 .     to bfd_perform_relocation will be set.  *}
  93 .  bfd_reloc_dangerous
  94 . }
  95 . bfd_reloc_status_type;
  96 .
  97 .
  98 .typedef struct reloc_cache_entry
  99 .{
 100 .  {* A pointer into the canonical table of pointers.  *}
 101 .  struct bfd_symbol **sym_ptr_ptr;
 102 .
 103 .  {* offset in section.  *}
 104 .  bfd_size_type address;
 105 .
 106 .  {* addend for relocation value.  *}
 107 .  bfd_vma addend;
 108 .
 109 .  {* Pointer to how to perform the required relocation.  *}
 110 .  reloc_howto_type *howto;
 111 .
 112 .}
 113 .arelent;
 114 .
 115 */
 116
 117 /*
 118 DESCRIPTION
 119
 120         Here is a description of each of the fields within an <<arelent>>:
 121
 122         o <<sym_ptr_ptr>>
 123
 124         The symbol table pointer points to a pointer to the symbol
 125         associated with the relocation request.  It is the pointer
 126         into the table returned by the back end's
 127         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 128         referenced through a pointer to a pointer so that tools like
 129         the linker can fix up all the symbols of the same name by
 130         modifying only one pointer. The relocation routine looks in
 131         the symbol and uses the base of the section the symbol is
 132         attached to and the value of the symbol as the initial
 133         relocation offset. If the symbol pointer is zero, then the
 134         section provided is looked up.
 135
 136         o <<address>>
 137
 138         The <<address>> field gives the offset in bytes from the base of
 139         the section data which owns the relocation record to the first
 140         byte of relocatable information. The actual data relocated
 141         will be relative to this point; for example, a relocation
 142         type which modifies the bottom two bytes of a four byte word
 143         would not touch the first byte pointed to in a big endian
 144         world.
 145
 146         o <<addend>>
 147
 148         The <<addend>> is a value provided by the back end to be added (!)
 149         to the relocation offset. Its interpretation is dependent upon
 150         the howto. For example, on the 68k the code:
 151
 152 |        char foo[];
 153 |        main()
 154 |                {
 155 |                return foo[0x12345678];
 156 |                }
 157
 158         Could be compiled into:
 159
 160 |        linkw fp,#-4
 161 |        moveb @@#12345678,d0
 162 |        extbl d0
 163 |        unlk fp
 164 |        rts
 165
 166         This could create a reloc pointing to <<foo>>, but leave the
 167         offset in the data, something like:
 168
 169 |RELOCATION RECORDS FOR [.text]:
 170 |offset   type      value
 171 |00000006 32        _foo
 172 |
 173 |00000000 4e56 fffc          ; linkw fp,#-4
 174 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 175 |0000000a 49c0               ; extbl d0
 176 |0000000c 4e5e               ; unlk fp
 177 |0000000e 4e75               ; rts
 178
 179         Using coff and an 88k, some instructions don't have enough
 180         space in them to represent the full address range, and
 181         pointers have to be loaded in two parts. So you'd get something like:
 182
 183 |        or.u     r13,r0,hi16(_foo+0x12345678)
 184 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 185 |        jmp      r1
 186
 187         This should create two relocs, both pointing to <<_foo>>, and with
 188         0x12340000 in their addend field. The data would consist of:
 189
 190 |RELOCATION RECORDS FOR [.text]:
 191 |offset   type      value
 192 |00000002 HVRT16    _foo+0x12340000
 193 |00000006 LVRT16    _foo+0x12340000
 194 |
 195 |00000000 5da05678           ; or.u r13,r0,0x5678
 196 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 197 |00000008 f400c001           ; jmp r1
 198
 199         The relocation routine digs out the value from the data, adds
 200         it to the addend to get the original offset, and then adds the
 201         value of <<_foo>>. Note that all 32 bits have to be kept around
 202         somewhere, to cope with carry from bit 15 to bit 16.
 203
 204         One further example is the sparc and the a.out format. The
 205         sparc has a similar problem to the 88k, in that some
 206         instructions don't have room for an entire offset, but on the
 207         sparc the parts are created in odd sized lumps. The designers of
 208         the a.out format chose to not use the data within the section
 209         for storing part of the offset; all the offset is kept within
 210         the reloc. Anything in the data should be ignored.
 211
 212 |        save %sp,-112,%sp
 213 |        sethi %hi(_foo+0x12345678),%g2
 214 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 215 |        ret
 216 |        restore
 217
 218         Both relocs contain a pointer to <<foo>>, and the offsets
 219         contain junk.
 220
 221 |RELOCATION RECORDS FOR [.text]:
 222 |offset   type      value
 223 |00000004 HI22      _foo+0x12345678
 224 |00000008 LO10      _foo+0x12345678
 225 |
 226 |00000000 9de3bf90     ; save %sp,-112,%sp
 227 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 228 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 229 |0000000c 81c7e008     ; ret
 230 |00000010 81e80000     ; restore
 231
 232         o <<howto>>
 233
 234         The <<howto>> field can be imagined as a
 235         relocation instruction. It is a pointer to a structure which
 236         contains information on what to do with all of the other
 237         information in the reloc record and data section. A back end
 238         would normally have a relocation instruction set and turn
 239         relocations into pointers to the correct structure on input -
 240         but it would be possible to create each howto field on demand.
 241
 242 */
 243
 244 /*
 245 SUBSUBSECTION
 246         <<enum complain_overflow>>
 247
 248         Indicates what sort of overflow checking should be done when
 249         performing a relocation.
 250
 251 CODE_FRAGMENT
 252 .
 253 .enum complain_overflow
 254 .{
 255 .  {* Do not complain on overflow.  *}
 256 .  complain_overflow_dont,
 257 .
 258 .  {* Complain if the value overflows when considered as a signed
 259 .     number one bit larger than the field.  ie. A bitfield of N bits
 260 .     is allowed to represent -2**n to 2**n-1.  *}
 261 .  complain_overflow_bitfield,
 262 .
 263 .  {* Complain if the value overflows when considered as a signed
 264 .     number.  *}
 265 .  complain_overflow_signed,
 266 .
 267 .  {* Complain if the value overflows when considered as an
 268 .     unsigned number.  *}
 269 .  complain_overflow_unsigned
 270 .};
 271
 272 */
 273
 274 /*
 275 SUBSUBSECTION
 276         <<reloc_howto_type>>
 277
 278         The <<reloc_howto_type>> is a structure which contains all the
 279         information that libbfd needs to know to tie up a back end's data.
 280
 281 CODE_FRAGMENT
 282 .struct bfd_symbol;             {* Forward declaration.  *}
 283 .
 284 .struct reloc_howto_struct
 285 .{
 286 .  {*  The type field has mainly a documentary use - the back end can
 287 .      do what it wants with it, though normally the back end's
 288 .      external idea of what a reloc number is stored
 289 .      in this field.  For example, a PC relative word relocation
 290 .      in a coff environment has the type 023 - because that's
 291 .      what the outside world calls a R_PCRWORD reloc.  *}
 292 .  unsigned int type;
 293 .
 294 .  {*  The value the final relocation is shifted right by.  This drops
 295 .      unwanted data from the relocation.  *}
 296 .  unsigned int rightshift;
 297 .
 298 .  {*  The size of the item to be relocated.  This is *not* a
 299 .      power-of-two measure.  To get the number of bytes operated
 300 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 301 .  int size;
 302 .
 303 .  {*  The number of bits in the item to be relocated.  This is used
 304 .      when doing overflow checking.  *}
 305 .  unsigned int bitsize;
 306 .
 307 .  {*  Notes that the relocation is relative to the location in the
 308 .      data section of the addend.  The relocation function will
 309 .      subtract from the relocation value the address of the location
 310 .      being relocated.  *}
 311 .  bfd_boolean pc_relative;
 312 .
 313 .  {*  The bit position of the reloc value in the destination.
 314 .      The relocated value is left shifted by this amount.  *}
 315 .  unsigned int bitpos;
 316 .
 317 .  {* What type of overflow error should be checked for when
 318 .     relocating.  *}
 319 .  enum complain_overflow complain_on_overflow;
 320 .
 321 .  {* If this field is non null, then the supplied function is
 322 .     called rather than the normal function.  This allows really
 323 .     strange relocation methods to be accommodated (e.g., i960 callj
 324 .     instructions).  *}
 325 .  bfd_reloc_status_type (*special_function)
 326 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 327 .     bfd *, char **);
 328 .
 329 .  {* The textual name of the relocation type.  *}
 330 .  char *name;
 331 .
 332 .  {* Some formats record a relocation addend in the section contents
 333 .     rather than with the relocation.  For ELF formats this is the
 334 .     distinction between USE_REL and USE_RELA (though the code checks
 335 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 336 .     addend is recorded with the section contents; when performing a
 337 .     partial link (ld -r) the section contents (the data) will be
 338 .     modified.  The value of this field is FALSE if addends are
 339 .     recorded with the relocation (in arelent.addend); when performing
 340 .     a partial link the relocation will be modified.
 341 .     All relocations for all ELF USE_RELA targets should set this field
 342 .     to FALSE (values of TRUE should be looked on with suspicion).
 343 .     However, the converse is not true: not all relocations of all ELF
 344 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 345 .     to each particular target.  For relocs that aren't used in partial
 346 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 347 .  bfd_boolean partial_inplace;
 348 .
 349 .  {* src_mask selects the part of the instruction (or data) to be used
 350 .     in the relocation sum.  If the target relocations don't have an
 351 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 352 .     dst_mask to extract the addend from the section contents.  If
 353 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 354 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 355 .     bogus as in those cases the value in the dst_mask part of the
 356 .     section contents should be treated as garbage.  *}
 357 .  bfd_vma src_mask;
 358 .
 359 .  {* dst_mask selects which parts of the instruction (or data) are
 360 .     replaced with a relocated value.  *}
 361 .  bfd_vma dst_mask;
 362 .
 363 .  {* When some formats create PC relative instructions, they leave
 364 .     the value of the pc of the place being relocated in the offset
 365 .     slot of the instruction, so that a PC relative relocation can
 366 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 367 .     Some formats leave the displacement part of an instruction
 368 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 369 .  bfd_boolean pcrel_offset;
 370 .};
 371 .
 372 */
 373
 374 /*
 375 FUNCTION
 376         The HOWTO Macro
 377
 378 DESCRIPTION
 379         The HOWTO define is horrible and will go away.
 380
 381 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 382 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 383
 384 DESCRIPTION
 385         And will be replaced with the totally magic way. But for the
 386         moment, we are compatible, so do it this way.
 387
 388 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 389 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 390 .         NAME, FALSE, 0, 0, IN)
 391 .
 392
 393 DESCRIPTION
 394         This is used to fill in an empty howto entry in an array.
 395
 396 .#define EMPTY_HOWTO(C) \
 397 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 398 .         NULL, FALSE, 0, 0, FALSE)
 399 .
 400
 401 DESCRIPTION
 402         Helper routine to turn a symbol into a relocation value.
 403
 404 .#define HOWTO_PREPARE(relocation, symbol)               \
 405 .  {                                                     \
 406 .    if (symbol != NULL)                                 \
 407 .      {                                                 \
 408 .        if (bfd_is_com_section (symbol->section))       \
 409 .          {                                             \
 410 .            relocation = 0;                             \
 411 .          }                                             \
 412 .        else                                            \
 413 .          {                                             \
 414 .            relocation = symbol->value;                 \
 415 .          }                                             \
 416 .      }                                                 \
 417 .  }
 418 .
 419 */
 420
 421 /*
 422 FUNCTION
 423         bfd_get_reloc_size
 424
 425 SYNOPSIS
 426         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 427
 428 DESCRIPTION
 429         For a reloc_howto_type that operates on a fixed number of bytes,
 430         this returns the number of bytes operated on.
 431  */
 432
 433 unsigned int
 434 bfd_get_reloc_size (reloc_howto_type *howto)
 435 {
 436   switch (howto->size)
 437     {
 438     case 0: return 1;
 439     case 1: return 2;
 440     case 2: return 4;
 441     case 3: return 0;
 442     case 4: return 8;
 443     case 8: return 16;
 444     case -2: return 4;
 445     default: abort ();
 446     }
 447 }
 448
 449 /*
 450 TYPEDEF
 451         arelent_chain
 452
 453 DESCRIPTION
 454
 455         How relocs are tied together in an <<asection>>:
 456
 457 .typedef struct relent_chain
 458 .{
 459 .  arelent relent;
 460 .  struct relent_chain *next;
 461 .}
 462 .arelent_chain;
 463 .
 464 */
 465
 466 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 467 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 468
 469 /*
 470 FUNCTION
 471         bfd_check_overflow
 472
 473 SYNOPSIS
 474         bfd_reloc_status_type bfd_check_overflow
 475           (enum complain_overflow how,
 476            unsigned int bitsize,
 477            unsigned int rightshift,
 478            unsigned int addrsize,
 479            bfd_vma relocation);
 480
 481 DESCRIPTION
 482         Perform overflow checking on @var{relocation} which has
 483         @var{bitsize} significant bits and will be shifted right by
 484         @var{rightshift} bits, on a machine with addresses containing
 485         @var{addrsize} significant bits.  The result is either of
 486         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 487
 488 */
 489
 490 bfd_reloc_status_type
 491 bfd_check_overflow (enum complain_overflow how,
 492                     unsigned int bitsize,
 493                     unsigned int rightshift,
 494                     unsigned int addrsize,
 495                     bfd_vma relocation)
 496 {
 497   bfd_vma fieldmask, addrmask, signmask, ss, a;
 498   bfd_reloc_status_type flag = bfd_reloc_ok;
 499
 500   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 501      we'll be permissive: extra bits in the field mask will
 502      automatically extend the address mask for purposes of the
 503      overflow check.  */
 504   fieldmask = N_ONES (bitsize);
 505   signmask = ~fieldmask;
 506   addrmask = N_ONES (addrsize) | fieldmask;
 507   a = (relocation & addrmask) >> rightshift;;
 508
 509   switch (how)
 510     {
 511     case complain_overflow_dont:
 512       break;
 513
 514     case complain_overflow_signed:
 515       /* If any sign bits are set, all sign bits must be set.  That
 516          is, A must be a valid negative address after shifting.  */
 517       signmask = ~ (fieldmask >> 1);
 518       /* Fall thru */
 519
 520     case complain_overflow_bitfield:
 521       /* Bitfields are sometimes signed, sometimes unsigned.  We
 522          explicitly allow an address wrap too, which means a bitfield
 523          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 524          if the value has some, but not all, bits set outside the
 525          field.  */
 526       ss = a & signmask;
 527       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 528         flag = bfd_reloc_overflow;
 529       break;
 530
 531     case complain_overflow_unsigned:
 532       /* We have an overflow if the address does not fit in the field.  */
 533       if ((a & signmask) != 0)
 534         flag = bfd_reloc_overflow;
 535       break;
 536
 537     default:
 538       abort ();
 539     }
 540
 541   return flag;
 542 }
 543
 544 /*
 545 FUNCTION
 546         bfd_perform_relocation
 547
 548 SYNOPSIS
 549         bfd_reloc_status_type bfd_perform_relocation
 550           (bfd *abfd,
 551            arelent *reloc_entry,
 552            void *data,
 553            asection *input_section,
 554            bfd *output_bfd,
 555            char **error_message);
 556
 557 DESCRIPTION
 558         If @var{output_bfd} is supplied to this function, the
 559         generated image will be relocatable; the relocations are
 560         copied to the output file after they have been changed to
 561         reflect the new state of the world. There are two ways of
 562         reflecting the results of partial linkage in an output file:
 563         by modifying the output data in place, and by modifying the
 564         relocation record.  Some native formats (e.g., basic a.out and
 565         basic coff) have no way of specifying an addend in the
 566         relocation type, so the addend has to go in the output data.
 567         This is no big deal since in these formats the output data
 568         slot will always be big enough for the addend. Complex reloc
 569         types with addends were invented to solve just this problem.
 570         The @var{error_message} argument is set to an error message if
 571         this return @code{bfd_reloc_dangerous}.
 572
 573 */
 574
 575 bfd_reloc_status_type
 576 bfd_perform_relocation (bfd *abfd,
 577                         arelent *reloc_entry,
 578                         void *data,
 579                         asection *input_section,
 580                         bfd *output_bfd,
 581                         char **error_message)
 582 {
 583   bfd_vma relocation;
 584   bfd_reloc_status_type flag = bfd_reloc_ok;
 585   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 586   bfd_vma output_base = 0;
 587   reloc_howto_type *howto = reloc_entry->howto;
 588   asection *reloc_target_output_section;
 589   asymbol *symbol;
 590
 591   symbol = *(reloc_entry->sym_ptr_ptr);
 592   if (bfd_is_abs_section (symbol->section)
 593       && output_bfd != NULL)
 594     {
 595       reloc_entry->address += input_section->output_offset;
 596       return bfd_reloc_ok;
 597     }
 598
 599   /* If we are not producing relocatable output, return an error if
 600      the symbol is not defined.  An undefined weak symbol is
 601      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 602   if (bfd_is_und_section (symbol->section)
 603       && (symbol->flags & BSF_WEAK) == 0
 604       && output_bfd == NULL)
 605     flag = bfd_reloc_undefined;
 606
 607   /* If there is a function supplied to handle this relocation type,
 608      call it.  It'll return `bfd_reloc_continue' if further processing
 609      can be done.  */
 610   if (howto->special_function)
 611     {
 612       bfd_reloc_status_type cont;
 613       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 614                                       input_section, output_bfd,
 615                                       error_message);
 616       if (cont != bfd_reloc_continue)
 617         return cont;
 618     }
 619
 620   /* Is the address of the relocation really within the section?  */
 621   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 622     return bfd_reloc_outofrange;
 623
 624   /* Work out which section the relocation is targeted at and the
 625      initial relocation command value.  */
 626
 627   /* Get symbol value.  (Common symbols are special.)  */
 628   if (bfd_is_com_section (symbol->section))
 629     relocation = 0;
 630   else
 631     relocation = symbol->value;
 632
 633   reloc_target_output_section = symbol->section->output_section;
 634
 635   /* Convert input-section-relative symbol value to absolute.  */
 636   if ((output_bfd && ! howto->partial_inplace)
 637       || reloc_target_output_section == NULL)
 638     output_base = 0;
 639   else
 640     output_base = reloc_target_output_section->vma;
 641
 642   relocation += output_base + symbol->section->output_offset;
 643
 644   /* Add in supplied addend.  */
 645   relocation += reloc_entry->addend;
 646
 647   /* Here the variable relocation holds the final address of the
 648      symbol we are relocating against, plus any addend.  */
 649
 650   if (howto->pc_relative)
 651     {
 652       /* This is a PC relative relocation.  We want to set RELOCATION
 653          to the distance between the address of the symbol and the
 654          location.  RELOCATION is already the address of the symbol.
 655
 656          We start by subtracting the address of the section containing
 657          the location.
 658
 659          If pcrel_offset is set, we must further subtract the position
 660          of the location within the section.  Some targets arrange for
 661          the addend to be the negative of the position of the location
 662          within the section; for example, i386-aout does this.  For
 663          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 664          include the position of the location; for example, m88kbcs,
 665          or ELF.  For those targets, pcrel_offset is TRUE.
 666
 667          If we are producing relocatable output, then we must ensure
 668          that this reloc will be correctly computed when the final
 669          relocation is done.  If pcrel_offset is FALSE we want to wind
 670          up with the negative of the location within the section,
 671          which means we must adjust the existing addend by the change
 672          in the location within the section.  If pcrel_offset is TRUE
 673          we do not want to adjust the existing addend at all.
 674
 675          FIXME: This seems logical to me, but for the case of
 676          producing relocatable output it is not what the code
 677          actually does.  I don't want to change it, because it seems
 678          far too likely that something will break.  */
 679
 680       relocation -=
 681         input_section->output_section->vma + input_section->output_offset;
 682
 683       if (howto->pcrel_offset)
 684         relocation -= reloc_entry->address;
 685     }
 686
 687   if (output_bfd != NULL)
 688     {
 689       if (! howto->partial_inplace)
 690         {
 691           /* This is a partial relocation, and we want to apply the relocation
 692              to the reloc entry rather than the raw data. Modify the reloc
 693              inplace to reflect what we now know.  */
 694           reloc_entry->addend = relocation;
 695           reloc_entry->address += input_section->output_offset;
 696           return flag;
 697         }
 698       else
 699         {
 700           /* This is a partial relocation, but inplace, so modify the
 701              reloc record a bit.
 702
 703              If we've relocated with a symbol with a section, change
 704              into a ref to the section belonging to the symbol.  */
 705
 706           reloc_entry->address += input_section->output_offset;
 707
 708           /* WTF?? */
 709           if (abfd->xvec->flavour == bfd_target_coff_flavour
 710               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 711               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 712             {
 713               /* For m68k-coff, the addend was being subtracted twice during
 714                  relocation with -r.  Removing the line below this comment
 715                  fixes that problem; see PR 2953.
 716
 717 However, Ian wrote the following, regarding removing the line below,
 718 which explains why it is still enabled:  --djm
 719
 720 If you put a patch like that into BFD you need to check all the COFF
 721 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 722 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 723 problem in a different way.  There may very well be a reason that the
 724 code works as it does.
 725
 726 Hmmm.  The first obvious point is that bfd_perform_relocation should
 727 not have any tests that depend upon the flavour.  It's seem like
 728 entirely the wrong place for such a thing.  The second obvious point
 729 is that the current code ignores the reloc addend when producing
 730 relocatable output for COFF.  That's peculiar.  In fact, I really
 731 have no idea what the point of the line you want to remove is.
 732
 733 A typical COFF reloc subtracts the old value of the symbol and adds in
 734 the new value to the location in the object file (if it's a pc
 735 relative reloc it adds the difference between the symbol value and the
 736 location).  When relocating we need to preserve that property.
 737
 738 BFD handles this by setting the addend to the negative of the old
 739 value of the symbol.  Unfortunately it handles common symbols in a
 740 non-standard way (it doesn't subtract the old value) but that's a
 741 different story (we can't change it without losing backward
 742 compatibility with old object files) (coff-i386 does subtract the old
 743 value, to be compatible with existing coff-i386 targets, like SCO).
 744
 745 So everything works fine when not producing relocatable output.  When
 746 we are producing relocatable output, logically we should do exactly
 747 what we do when not producing relocatable output.  Therefore, your
 748 patch is correct.  In fact, it should probably always just set
 749 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 750 add the value into the object file.  This won't hurt the COFF code,
 751 which doesn't use the addend; I'm not sure what it will do to other
 752 formats (the thing to check for would be whether any formats both use
 753 the addend and set partial_inplace).
 754
 755 When I wanted to make coff-i386 produce relocatable output, I ran
 756 into the problem that you are running into: I wanted to remove that
 757 line.  Rather than risk it, I made the coff-i386 relocs use a special
 758 function; it's coff_i386_reloc in coff-i386.c.  The function
 759 specifically adds the addend field into the object file, knowing that
 760 bfd_perform_relocation is not going to.  If you remove that line, then
 761 coff-i386.c will wind up adding the addend field in twice.  It's
 762 trivial to fix; it just needs to be done.
 763
 764 The problem with removing the line is just that it may break some
 765 working code.  With BFD it's hard to be sure of anything.  The right
 766 way to deal with this is simply to build and test at least all the
 767 supported COFF targets.  It should be straightforward if time and disk
 768 space consuming.  For each target:
 769     1) build the linker
 770     2) generate some executable, and link it using -r (I would
 771        probably use paranoia.o and link against newlib/libc.a, which
 772        for all the supported targets would be available in
 773        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 774     3) make the change to reloc.c
 775     4) rebuild the linker
 776     5) repeat step 2
 777     6) if the resulting object files are the same, you have at least
 778        made it no worse
 779     7) if they are different you have to figure out which version is
 780        right
 781 */
 782               relocation -= reloc_entry->addend;
 783               reloc_entry->addend = 0;
 784             }
 785           else
 786             {
 787               reloc_entry->addend = relocation;
 788             }
 789         }
 790     }
 791   else
 792     {
 793       reloc_entry->addend = 0;
 794     }
 795
 796   /* FIXME: This overflow checking is incomplete, because the value
 797      might have overflowed before we get here.  For a correct check we
 798      need to compute the value in a size larger than bitsize, but we
 799      can't reasonably do that for a reloc the same size as a host
 800      machine word.
 801      FIXME: We should also do overflow checking on the result after
 802      adding in the value contained in the object file.  */
 803   if (howto->complain_on_overflow != complain_overflow_dont
 804       && flag == bfd_reloc_ok)
 805     flag = bfd_check_overflow (howto->complain_on_overflow,
 806                                howto->bitsize,
 807                                howto->rightshift,
 808                                bfd_arch_bits_per_address (abfd),
 809                                relocation);
 810
 811   /* Either we are relocating all the way, or we don't want to apply
 812      the relocation to the reloc entry (probably because there isn't
 813      any room in the output format to describe addends to relocs).  */
 814
 815   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 816      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 817      following program:
 818
 819      struct str
 820      {
 821        unsigned int i0;
 822      } s = { 0 };
 823
 824      int
 825      main ()
 826      {
 827        unsigned long x;
 828
 829        x = 0x100000000;
 830        x <<= (unsigned long) s.i0;
 831        if (x == 0)
 832          printf ("failed\n");
 833        else
 834          printf ("succeeded (%lx)\n", x);
 835      }
 836      */
 837
 838   relocation >>= (bfd_vma) howto->rightshift;
 839
 840   /* Shift everything up to where it's going to be used.  */
 841   relocation <<= (bfd_vma) howto->bitpos;
 842
 843   /* Wait for the day when all have the mask in them.  */
 844
 845   /* What we do:
 846      i instruction to be left alone
 847      o offset within instruction
 848      r relocation offset to apply
 849      S src mask
 850      D dst mask
 851      N ~dst mask
 852      A part 1
 853      B part 2
 854      R result
 855
 856      Do this:
 857      ((  i i i i i o o o o o  from bfd_get<size>
 858      and           S S S S S) to get the size offset we want
 859      +   r r r r r r r r r r) to get the final value to place
 860      and           D D D D D  to chop to right size
 861      -----------------------
 862      =             A A A A A
 863      And this:
 864      (   i i i i i o o o o o  from bfd_get<size>
 865      and N N N N N          ) get instruction
 866      -----------------------
 867      =   B B B B B
 868
 869      And then:
 870      (   B B B B B
 871      or            A A A A A)
 872      -----------------------
 873      =   R R R R R R R R R R  put into bfd_put<size>
 874      */
 875
 876 #define DOIT(x) \
 877   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 878
 879   switch (howto->size)
 880     {
 881     case 0:
 882       {
 883         char x = bfd_get_8 (abfd, (char *) data + octets);
 884         DOIT (x);
 885         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 886       }
 887       break;
 888
 889     case 1:
 890       {
 891         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 892         DOIT (x);
 893         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 894       }
 895       break;
 896     case 2:
 897       {
 898         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 899         DOIT (x);
 900         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 901       }
 902       break;
 903     case -2:
 904       {
 905         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 906         relocation = -relocation;
 907         DOIT (x);
 908         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 909       }
 910       break;
 911
 912     case -1:
 913       {
 914         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 915         relocation = -relocation;
 916         DOIT (x);
 917         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 918       }
 919       break;
 920
 921     case 3:
 922       /* Do nothing */
 923       break;
 924
 925     case 4:
 926 #ifdef BFD64
 927       {
 928         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 929         DOIT (x);
 930         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 931       }
 932 #else
 933       abort ();
 934 #endif
 935       break;
 936     default:
 937       return bfd_reloc_other;
 938     }
 939
 940   return flag;
 941 }
 942
 943 /*
 944 FUNCTION
 945         bfd_install_relocation
 946
 947 SYNOPSIS
 948         bfd_reloc_status_type bfd_install_relocation
 949           (bfd *abfd,
 950            arelent *reloc_entry,
 951            void *data, bfd_vma data_start,
 952            asection *input_section,
 953            char **error_message);
 954
 955 DESCRIPTION
 956         This looks remarkably like <<bfd_perform_relocation>>, except it
 957         does not expect that the section contents have been filled in.
 958         I.e., it's suitable for use when creating, rather than applying
 959         a relocation.
 960
 961         For now, this function should be considered reserved for the
 962         assembler.
 963 */
 964
 965 bfd_reloc_status_type
 966 bfd_install_relocation (bfd *abfd,
 967                         arelent *reloc_entry,
 968                         void *data_start,
 969                         bfd_vma data_start_offset,
 970                         asection *input_section,
 971                         char **error_message)
 972 {
 973   bfd_vma relocation;
 974   bfd_reloc_status_type flag = bfd_reloc_ok;
 975   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 976   bfd_vma output_base = 0;
 977   reloc_howto_type *howto = reloc_entry->howto;
 978   asection *reloc_target_output_section;
 979   asymbol *symbol;
 980   bfd_byte *data;
 981
 982   symbol = *(reloc_entry->sym_ptr_ptr);
 983   if (bfd_is_abs_section (symbol->section))
 984     {
 985       reloc_entry->address += input_section->output_offset;
 986       return bfd_reloc_ok;
 987     }
 988
 989   /* If there is a function supplied to handle this relocation type,
 990      call it.  It'll return `bfd_reloc_continue' if further processing
 991      can be done.  */
 992   if (howto->special_function)
 993     {
 994       bfd_reloc_status_type cont;
 995
 996       /* XXX - The special_function calls haven't been fixed up to deal
 997          with creating new relocations and section contents.  */
 998       cont = howto->special_function (abfd, reloc_entry, symbol,
 999                                       /* XXX - Non-portable! */
1000                                       ((bfd_byte *) data_start
1001                                        - data_start_offset),
1002                                       input_section, abfd, error_message);
1003       if (cont != bfd_reloc_continue)
1004         return cont;
1005     }
1006
1007   /* Is the address of the relocation really within the section?  */
1008   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1009     return bfd_reloc_outofrange;
1010
1011   /* Work out which section the relocation is targeted at and the
1012      initial relocation command value.  */
1013
1014   /* Get symbol value.  (Common symbols are special.)  */
1015   if (bfd_is_com_section (symbol->section))
1016     relocation = 0;
1017   else
1018     relocation = symbol->value;
1019
1020   reloc_target_output_section = symbol->section->output_section;
1021
1022   /* Convert input-section-relative symbol value to absolute.  */
1023   if (! howto->partial_inplace)
1024     output_base = 0;
1025   else
1026     output_base = reloc_target_output_section->vma;
1027
1028   relocation += output_base + symbol->section->output_offset;
1029
1030   /* Add in supplied addend.  */
1031   relocation += reloc_entry->addend;
1032
1033   /* Here the variable relocation holds the final address of the
1034      symbol we are relocating against, plus any addend.  */
1035
1036   if (howto->pc_relative)
1037     {
1038       /* This is a PC relative relocation.  We want to set RELOCATION
1039          to the distance between the address of the symbol and the
1040          location.  RELOCATION is already the address of the symbol.
1041
1042          We start by subtracting the address of the section containing
1043          the location.
1044
1045          If pcrel_offset is set, we must further subtract the position
1046          of the location within the section.  Some targets arrange for
1047          the addend to be the negative of the position of the location
1048          within the section; for example, i386-aout does this.  For
1049          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1050          include the position of the location; for example, m88kbcs,
1051          or ELF.  For those targets, pcrel_offset is TRUE.
1052
1053          If we are producing relocatable output, then we must ensure
1054          that this reloc will be correctly computed when the final
1055          relocation is done.  If pcrel_offset is FALSE we want to wind
1056          up with the negative of the location within the section,
1057          which means we must adjust the existing addend by the change
1058          in the location within the section.  If pcrel_offset is TRUE
1059          we do not want to adjust the existing addend at all.
1060
1061          FIXME: This seems logical to me, but for the case of
1062          producing relocatable output it is not what the code
1063          actually does.  I don't want to change it, because it seems
1064          far too likely that something will break.  */
1065
1066       relocation -=
1067         input_section->output_section->vma + input_section->output_offset;
1068
1069       if (howto->pcrel_offset && howto->partial_inplace)
1070         relocation -= reloc_entry->address;
1071     }
1072
1073   if (! howto->partial_inplace)
1074     {
1075       /* This is a partial relocation, and we want to apply the relocation
1076          to the reloc entry rather than the raw data. Modify the reloc
1077          inplace to reflect what we now know.  */
1078       reloc_entry->addend = relocation;
1079       reloc_entry->address += input_section->output_offset;
1080       return flag;
1081     }
1082   else
1083     {
1084       /* This is a partial relocation, but inplace, so modify the
1085          reloc record a bit.
1086
1087          If we've relocated with a symbol with a section, change
1088          into a ref to the section belonging to the symbol.  */
1089       reloc_entry->address += input_section->output_offset;
1090
1091       /* WTF?? */
1092       if (abfd->xvec->flavour == bfd_target_coff_flavour
1093           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1094           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1095         {
1096
1097           /* For m68k-coff, the addend was being subtracted twice during
1098              relocation with -r.  Removing the line below this comment
1099              fixes that problem; see PR 2953.
1100
1101 However, Ian wrote the following, regarding removing the line below,
1102 which explains why it is still enabled:  --djm
1103
1104 If you put a patch like that into BFD you need to check all the COFF
1105 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1106 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1107 problem in a different way.  There may very well be a reason that the
1108 code works as it does.
1109
1110 Hmmm.  The first obvious point is that bfd_install_relocation should
1111 not have any tests that depend upon the flavour.  It's seem like
1112 entirely the wrong place for such a thing.  The second obvious point
1113 is that the current code ignores the reloc addend when producing
1114 relocatable output for COFF.  That's peculiar.  In fact, I really
1115 have no idea what the point of the line you want to remove is.
1116
1117 A typical COFF reloc subtracts the old value of the symbol and adds in
1118 the new value to the location in the object file (if it's a pc
1119 relative reloc it adds the difference between the symbol value and the
1120 location).  When relocating we need to preserve that property.
1121
1122 BFD handles this by setting the addend to the negative of the old
1123 value of the symbol.  Unfortunately it handles common symbols in a
1124 non-standard way (it doesn't subtract the old value) but that's a
1125 different story (we can't change it without losing backward
1126 compatibility with old object files) (coff-i386 does subtract the old
1127 value, to be compatible with existing coff-i386 targets, like SCO).
1128
1129 So everything works fine when not producing relocatable output.  When
1130 we are producing relocatable output, logically we should do exactly
1131 what we do when not producing relocatable output.  Therefore, your
1132 patch is correct.  In fact, it should probably always just set
1133 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1134 add the value into the object file.  This won't hurt the COFF code,
1135 which doesn't use the addend; I'm not sure what it will do to other
1136 formats (the thing to check for would be whether any formats both use
1137 the addend and set partial_inplace).
1138
1139 When I wanted to make coff-i386 produce relocatable output, I ran
1140 into the problem that you are running into: I wanted to remove that
1141 line.  Rather than risk it, I made the coff-i386 relocs use a special
1142 function; it's coff_i386_reloc in coff-i386.c.  The function
1143 specifically adds the addend field into the object file, knowing that
1144 bfd_install_relocation is not going to.  If you remove that line, then
1145 coff-i386.c will wind up adding the addend field in twice.  It's
1146 trivial to fix; it just needs to be done.
1147
1148 The problem with removing the line is just that it may break some
1149 working code.  With BFD it's hard to be sure of anything.  The right
1150 way to deal with this is simply to build and test at least all the
1151 supported COFF targets.  It should be straightforward if time and disk
1152 space consuming.  For each target:
1153     1) build the linker
1154     2) generate some executable, and link it using -r (I would
1155        probably use paranoia.o and link against newlib/libc.a, which
1156        for all the supported targets would be available in
1157        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1158     3) make the change to reloc.c
1159     4) rebuild the linker
1160     5) repeat step 2
1161     6) if the resulting object files are the same, you have at least
1162        made it no worse
1163     7) if they are different you have to figure out which version is
1164        right.  */
1165           relocation -= reloc_entry->addend;
1166           /* FIXME: There should be no target specific code here...  */
1167           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1168             reloc_entry->addend = 0;
1169         }
1170       else
1171         {
1172           reloc_entry->addend = relocation;
1173         }
1174     }
1175
1176   /* FIXME: This overflow checking is incomplete, because the value
1177      might have overflowed before we get here.  For a correct check we
1178      need to compute the value in a size larger than bitsize, but we
1179      can't reasonably do that for a reloc the same size as a host
1180      machine word.
1181      FIXME: We should also do overflow checking on the result after
1182      adding in the value contained in the object file.  */
1183   if (howto->complain_on_overflow != complain_overflow_dont)
1184     flag = bfd_check_overflow (howto->complain_on_overflow,
1185                                howto->bitsize,
1186                                howto->rightshift,
1187                                bfd_arch_bits_per_address (abfd),
1188                                relocation);
1189
1190   /* Either we are relocating all the way, or we don't want to apply
1191      the relocation to the reloc entry (probably because there isn't
1192      any room in the output format to describe addends to relocs).  */
1193
1194   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1195      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1196      following program:
1197
1198      struct str
1199      {
1200        unsigned int i0;
1201      } s = { 0 };
1202
1203      int
1204      main ()
1205      {
1206        unsigned long x;
1207
1208        x = 0x100000000;
1209        x <<= (unsigned long) s.i0;
1210        if (x == 0)
1211          printf ("failed\n");
1212        else
1213          printf ("succeeded (%lx)\n", x);
1214      }
1215      */
1216
1217   relocation >>= (bfd_vma) howto->rightshift;
1218
1219   /* Shift everything up to where it's going to be used.  */
1220   relocation <<= (bfd_vma) howto->bitpos;
1221
1222   /* Wait for the day when all have the mask in them.  */
1223
1224   /* What we do:
1225      i instruction to be left alone
1226      o offset within instruction
1227      r relocation offset to apply
1228      S src mask
1229      D dst mask
1230      N ~dst mask
1231      A part 1
1232      B part 2
1233      R result
1234
1235      Do this:
1236      ((  i i i i i o o o o o  from bfd_get<size>
1237      and           S S S S S) to get the size offset we want
1238      +   r r r r r r r r r r) to get the final value to place
1239      and           D D D D D  to chop to right size
1240      -----------------------
1241      =             A A A A A
1242      And this:
1243      (   i i i i i o o o o o  from bfd_get<size>
1244      and N N N N N          ) get instruction
1245      -----------------------
1246      =   B B B B B
1247
1248      And then:
1249      (   B B B B B
1250      or            A A A A A)
1251      -----------------------
1252      =   R R R R R R R R R R  put into bfd_put<size>
1253      */
1254
1255 #define DOIT(x) \
1256   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1257
1258   data = (bfd_byte *) data_start + (octets - data_start_offset);
1259
1260   switch (howto->size)
1261     {
1262     case 0:
1263       {
1264         char x = bfd_get_8 (abfd, data);
1265         DOIT (x);
1266         bfd_put_8 (abfd, x, data);
1267       }
1268       break;
1269
1270     case 1:
1271       {
1272         short x = bfd_get_16 (abfd, data);
1273         DOIT (x);
1274         bfd_put_16 (abfd, (bfd_vma) x, data);
1275       }
1276       break;
1277     case 2:
1278       {
1279         long x = bfd_get_32 (abfd, data);
1280         DOIT (x);
1281         bfd_put_32 (abfd, (bfd_vma) x, data);
1282       }
1283       break;
1284     case -2:
1285       {
1286         long x = bfd_get_32 (abfd, data);
1287         relocation = -relocation;
1288         DOIT (x);
1289         bfd_put_32 (abfd, (bfd_vma) x, data);
1290       }
1291       break;
1292
1293     case 3:
1294       /* Do nothing */
1295       break;
1296
1297     case 4:
1298       {
1299         bfd_vma x = bfd_get_64 (abfd, data);
1300         DOIT (x);
1301         bfd_put_64 (abfd, x, data);
1302       }
1303       break;
1304     default:
1305       return bfd_reloc_other;
1306     }
1307
1308   return flag;
1309 }
1310
1311 /* This relocation routine is used by some of the backend linkers.
1312    They do not construct asymbol or arelent structures, so there is no
1313    reason for them to use bfd_perform_relocation.  Also,
1314    bfd_perform_relocation is so hacked up it is easier to write a new
1315    function than to try to deal with it.
1316
1317    This routine does a final relocation.  Whether it is useful for a
1318    relocatable link depends upon how the object format defines
1319    relocations.
1320
1321    FIXME: This routine ignores any special_function in the HOWTO,
1322    since the existing special_function values have been written for
1323    bfd_perform_relocation.
1324
1325    HOWTO is the reloc howto information.
1326    INPUT_BFD is the BFD which the reloc applies to.
1327    INPUT_SECTION is the section which the reloc applies to.
1328    CONTENTS is the contents of the section.
1329    ADDRESS is the address of the reloc within INPUT_SECTION.
1330    VALUE is the value of the symbol the reloc refers to.
1331    ADDEND is the addend of the reloc.  */
1332
1333 bfd_reloc_status_type
1334 _bfd_final_link_relocate (reloc_howto_type *howto,
1335                           bfd *input_bfd,
1336                           asection *input_section,
1337                           bfd_byte *contents,
1338                           bfd_vma address,
1339                           bfd_vma value,
1340                           bfd_vma addend)
1341 {
1342   bfd_vma relocation;
1343
1344   /* Sanity check the address.  */
1345   if (address > bfd_get_section_limit (input_bfd, input_section))
1346     return bfd_reloc_outofrange;
1347
1348   /* This function assumes that we are dealing with a basic relocation
1349      against a symbol.  We want to compute the value of the symbol to
1350      relocate to.  This is just VALUE, the value of the symbol, plus
1351      ADDEND, any addend associated with the reloc.  */
1352   relocation = value + addend;
1353
1354   /* If the relocation is PC relative, we want to set RELOCATION to
1355      the distance between the symbol (currently in RELOCATION) and the
1356      location we are relocating.  Some targets (e.g., i386-aout)
1357      arrange for the contents of the section to be the negative of the
1358      offset of the location within the section; for such targets
1359      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1360      simply leave the contents of the section as zero; for such
1361      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1362      need to subtract out the offset of the location within the
1363      section (which is just ADDRESS).  */
1364   if (howto->pc_relative)
1365     {
1366       relocation -= (input_section->output_section->vma
1367                      + input_section->output_offset);
1368       if (howto->pcrel_offset)
1369         relocation -= address;
1370     }
1371
1372   return _bfd_relocate_contents (howto, input_bfd, relocation,
1373                                  contents + address);
1374 }
1375
1376 /* Relocate a given location using a given value and howto.  */
1377
1378 bfd_reloc_status_type
1379 _bfd_relocate_contents (reloc_howto_type *howto,
1380                         bfd *input_bfd,
1381                         bfd_vma relocation,
1382                         bfd_byte *location)
1383 {
1384   int size;
1385   bfd_vma x = 0;
1386   bfd_reloc_status_type flag;
1387   unsigned int rightshift = howto->rightshift;
1388   unsigned int bitpos = howto->bitpos;
1389
1390   /* If the size is negative, negate RELOCATION.  This isn't very
1391      general.  */
1392   if (howto->size < 0)
1393     relocation = -relocation;
1394
1395   /* Get the value we are going to relocate.  */
1396   size = bfd_get_reloc_size (howto);
1397   switch (size)
1398     {
1399     default:
1400     case 0:
1401       abort ();
1402     case 1:
1403       x = bfd_get_8 (input_bfd, location);
1404       break;
1405     case 2:
1406       x = bfd_get_16 (input_bfd, location);
1407       break;
1408     case 4:
1409       x = bfd_get_32 (input_bfd, location);
1410       break;
1411     case 8:
1412 #ifdef BFD64
1413       x = bfd_get_64 (input_bfd, location);
1414 #else
1415       abort ();
1416 #endif
1417       break;
1418     }
1419
1420   /* Check for overflow.  FIXME: We may drop bits during the addition
1421      which we don't check for.  We must either check at every single
1422      operation, which would be tedious, or we must do the computations
1423      in a type larger than bfd_vma, which would be inefficient.  */
1424   flag = bfd_reloc_ok;
1425   if (howto->complain_on_overflow != complain_overflow_dont)
1426     {
1427       bfd_vma addrmask, fieldmask, signmask, ss;
1428       bfd_vma a, b, sum;
1429
1430       /* Get the values to be added together.  For signed and unsigned
1431          relocations, we assume that all values should be truncated to
1432          the size of an address.  For bitfields, all the bits matter.
1433          See also bfd_check_overflow.  */
1434       fieldmask = N_ONES (howto->bitsize);
1435       signmask = ~fieldmask;
1436       addrmask = N_ONES (bfd_arch_bits_per_address (input_bfd)) | fieldmask;
1437       a = (relocation & addrmask) >> rightshift;
1438       b = (x & howto->src_mask & addrmask) >> bitpos;
1439
1440       switch (howto->complain_on_overflow)
1441         {
1442         case complain_overflow_signed:
1443           /* If any sign bits are set, all sign bits must be set.
1444              That is, A must be a valid negative address after
1445              shifting.  */
1446           signmask = ~(fieldmask >> 1);
1447           /* Fall thru */
1448
1449         case complain_overflow_bitfield:
1450           /* Much like the signed check, but for a field one bit
1451              wider.  We allow a bitfield to represent numbers in the
1452              range -2**n to 2**n-1, where n is the number of bits in the
1453              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1454              can't overflow, which is exactly what we want.  */
1455           ss = a & signmask;
1456           if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
1457             flag = bfd_reloc_overflow;
1458
1459           /* We only need this next bit of code if the sign bit of B
1460              is below the sign bit of A.  This would only happen if
1461              SRC_MASK had fewer bits than BITSIZE.  Note that if
1462              SRC_MASK has more bits than BITSIZE, we can get into
1463              trouble; we would need to verify that B is in range, as
1464              we do for A above.  */
1465           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1466           ss >>= bitpos;
1467
1468           /* Set all the bits above the sign bit.  */
1469           b = (b ^ ss) - ss;
1470
1471           /* Now we can do the addition.  */
1472           sum = a + b;
1473
1474           /* See if the result has the correct sign.  Bits above the
1475              sign bit are junk now; ignore them.  If the sum is
1476              positive, make sure we did not have all negative inputs;
1477              if the sum is negative, make sure we did not have all
1478              positive inputs.  The test below looks only at the sign
1479              bits, and it really just
1480                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1481
1482              We mask with addrmask here to explicitly allow an address
1483              wrap-around.  The Linux kernel relies on it, and it is
1484              the only way to write assembler code which can run when
1485              loaded at a location 0x80000000 away from the location at
1486              which it is linked.  */
1487           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1488             flag = bfd_reloc_overflow;
1489           break;
1490
1491         case complain_overflow_unsigned:
1492           /* Checking for an unsigned overflow is relatively easy:
1493              trim the addresses and add, and trim the result as well.
1494              Overflow is normally indicated when the result does not
1495              fit in the field.  However, we also need to consider the
1496              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1497              input is 0x80000000, and bfd_vma is only 32 bits; then we
1498              will get sum == 0, but there is an overflow, since the
1499              inputs did not fit in the field.  Instead of doing a
1500              separate test, we can check for this by or-ing in the
1501              operands when testing for the sum overflowing its final
1502              field.  */
1503           sum = (a + b) & addrmask;
1504           if ((a | b | sum) & signmask)
1505             flag = bfd_reloc_overflow;
1506           break;
1507
1508         default:
1509           abort ();
1510         }
1511     }
1512
1513   /* Put RELOCATION in the right bits.  */
1514   relocation >>= (bfd_vma) rightshift;
1515   relocation <<= (bfd_vma) bitpos;
1516
1517   /* Add RELOCATION to the right bits of X.  */
1518   x = ((x & ~howto->dst_mask)
1519        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1520
1521   /* Put the relocated value back in the object file.  */
1522   switch (size)
1523     {
1524     default:
1525     case 0:
1526       abort ();
1527     case 1:
1528       bfd_put_8 (input_bfd, x, location);
1529       break;
1530     case 2:
1531       bfd_put_16 (input_bfd, x, location);
1532       break;
1533     case 4:
1534       bfd_put_32 (input_bfd, x, location);
1535       break;
1536     case 8:
1537 #ifdef BFD64
1538       bfd_put_64 (input_bfd, x, location);
1539 #else
1540       abort ();
1541 #endif
1542       break;
1543     }
1544
1545   return flag;
1546 }
1547
1548 /*
1549 DOCDD
1550 INODE
1551         howto manager,  , typedef arelent, Relocations
1552
1553 SUBSECTION
1554         The howto manager
1555
1556         When an application wants to create a relocation, but doesn't
1557         know what the target machine might call it, it can find out by
1558         using this bit of code.
1559
1560 */
1561
1562 /*
1563 TYPEDEF
1564         bfd_reloc_code_type
1565
1566 DESCRIPTION
1567         The insides of a reloc code.  The idea is that, eventually, there
1568         will be one enumerator for every type of relocation we ever do.
1569         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1570         return a howto pointer.
1571
1572         This does mean that the application must determine the correct
1573         enumerator value; you can't get a howto pointer from a random set
1574         of attributes.
1575
1576 SENUM
1577    bfd_reloc_code_real
1578
1579 ENUM
1580   BFD_RELOC_64
1581 ENUMX
1582   BFD_RELOC_32
1583 ENUMX
1584   BFD_RELOC_26
1585 ENUMX
1586   BFD_RELOC_24
1587 ENUMX
1588   BFD_RELOC_16
1589 ENUMX
1590   BFD_RELOC_14
1591 ENUMX
1592   BFD_RELOC_8
1593 ENUMDOC
1594   Basic absolute relocations of N bits.
1595
1596 ENUM
1597   BFD_RELOC_64_PCREL
1598 ENUMX
1599   BFD_RELOC_32_PCREL
1600 ENUMX
1601   BFD_RELOC_24_PCREL
1602 ENUMX
1603   BFD_RELOC_16_PCREL
1604 ENUMX
1605   BFD_RELOC_12_PCREL
1606 ENUMX
1607   BFD_RELOC_8_PCREL
1608 ENUMDOC
1609   PC-relative relocations.  Sometimes these are relative to the address
1610 of the relocation itself; sometimes they are relative to the start of
1611 the section containing the relocation.  It depends on the specific target.
1612
1613 The 24-bit relocation is used in some Intel 960 configurations.
1614
1615 ENUM
1616   BFD_RELOC_32_SECREL
1617 ENUMDOC
1618   Section relative relocations.  Some targets need this for DWARF2.
1619
1620 ENUM
1621   BFD_RELOC_32_GOT_PCREL
1622 ENUMX
1623   BFD_RELOC_16_GOT_PCREL
1624 ENUMX
1625   BFD_RELOC_8_GOT_PCREL
1626 ENUMX
1627   BFD_RELOC_32_GOTOFF
1628 ENUMX
1629   BFD_RELOC_16_GOTOFF
1630 ENUMX
1631   BFD_RELOC_LO16_GOTOFF
1632 ENUMX
1633   BFD_RELOC_HI16_GOTOFF
1634 ENUMX
1635   BFD_RELOC_HI16_S_GOTOFF
1636 ENUMX
1637   BFD_RELOC_8_GOTOFF
1638 ENUMX
1639   BFD_RELOC_64_PLT_PCREL
1640 ENUMX
1641   BFD_RELOC_32_PLT_PCREL
1642 ENUMX
1643   BFD_RELOC_24_PLT_PCREL
1644 ENUMX
1645   BFD_RELOC_16_PLT_PCREL
1646 ENUMX
1647   BFD_RELOC_8_PLT_PCREL
1648 ENUMX
1649   BFD_RELOC_64_PLTOFF
1650 ENUMX
1651   BFD_RELOC_32_PLTOFF
1652 ENUMX
1653   BFD_RELOC_16_PLTOFF
1654 ENUMX
1655   BFD_RELOC_LO16_PLTOFF
1656 ENUMX
1657   BFD_RELOC_HI16_PLTOFF
1658 ENUMX
1659   BFD_RELOC_HI16_S_PLTOFF
1660 ENUMX
1661   BFD_RELOC_8_PLTOFF
1662 ENUMDOC
1663   For ELF.
1664
1665 ENUM
1666   BFD_RELOC_68K_GLOB_DAT
1667 ENUMX
1668   BFD_RELOC_68K_JMP_SLOT
1669 ENUMX
1670   BFD_RELOC_68K_RELATIVE
1671 ENUMDOC
1672   Relocations used by 68K ELF.
1673
1674 ENUM
1675   BFD_RELOC_32_BASEREL
1676 ENUMX
1677   BFD_RELOC_16_BASEREL
1678 ENUMX
1679   BFD_RELOC_LO16_BASEREL
1680 ENUMX
1681   BFD_RELOC_HI16_BASEREL
1682 ENUMX
1683   BFD_RELOC_HI16_S_BASEREL
1684 ENUMX
1685   BFD_RELOC_8_BASEREL
1686 ENUMX
1687   BFD_RELOC_RVA
1688 ENUMDOC
1689   Linkage-table relative.
1690
1691 ENUM
1692   BFD_RELOC_8_FFnn
1693 ENUMDOC
1694   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1695
1696 ENUM
1697   BFD_RELOC_32_PCREL_S2
1698 ENUMX
1699   BFD_RELOC_16_PCREL_S2
1700 ENUMX
1701   BFD_RELOC_23_PCREL_S2
1702 ENUMDOC
1703   These PC-relative relocations are stored as word displacements --
1704 i.e., byte displacements shifted right two bits.  The 30-bit word
1705 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1706 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1707 signed 16-bit displacement is used on the MIPS, and the 23-bit
1708 displacement is used on the Alpha.
1709
1710 ENUM
1711   BFD_RELOC_HI22
1712 ENUMX
1713   BFD_RELOC_LO10
1714 ENUMDOC
1715   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1716 the target word.  These are used on the SPARC.
1717
1718 ENUM
1719   BFD_RELOC_GPREL16
1720 ENUMX
1721   BFD_RELOC_GPREL32
1722 ENUMDOC
1723   For systems that allocate a Global Pointer register, these are
1724 displacements off that register.  These relocation types are
1725 handled specially, because the value the register will have is
1726 decided relatively late.
1727
1728 ENUM
1729   BFD_RELOC_I960_CALLJ
1730 ENUMDOC
1731   Reloc types used for i960/b.out.
1732
1733 ENUM
1734   BFD_RELOC_NONE
1735 ENUMX
1736   BFD_RELOC_SPARC_WDISP22
1737 ENUMX
1738   BFD_RELOC_SPARC22
1739 ENUMX
1740   BFD_RELOC_SPARC13
1741 ENUMX
1742   BFD_RELOC_SPARC_GOT10
1743 ENUMX
1744   BFD_RELOC_SPARC_GOT13
1745 ENUMX
1746   BFD_RELOC_SPARC_GOT22
1747 ENUMX
1748   BFD_RELOC_SPARC_PC10
1749 ENUMX
1750   BFD_RELOC_SPARC_PC22
1751 ENUMX
1752   BFD_RELOC_SPARC_WPLT30
1753 ENUMX
1754   BFD_RELOC_SPARC_COPY
1755 ENUMX
1756   BFD_RELOC_SPARC_GLOB_DAT
1757 ENUMX
1758   BFD_RELOC_SPARC_JMP_SLOT
1759 ENUMX
1760   BFD_RELOC_SPARC_RELATIVE
1761 ENUMX
1762   BFD_RELOC_SPARC_UA16
1763 ENUMX
1764   BFD_RELOC_SPARC_UA32
1765 ENUMX
1766   BFD_RELOC_SPARC_UA64
1767 ENUMDOC
1768   SPARC ELF relocations.  There is probably some overlap with other
1769   relocation types already defined.
1770
1771 ENUM
1772   BFD_RELOC_SPARC_BASE13
1773 ENUMX
1774   BFD_RELOC_SPARC_BASE22
1775 ENUMDOC
1776   I think these are specific to SPARC a.out (e.g., Sun 4).
1777
1778 ENUMEQ
1779   BFD_RELOC_SPARC_64
1780   BFD_RELOC_64
1781 ENUMX
1782   BFD_RELOC_SPARC_10
1783 ENUMX
1784   BFD_RELOC_SPARC_11
1785 ENUMX
1786   BFD_RELOC_SPARC_OLO10
1787 ENUMX
1788   BFD_RELOC_SPARC_HH22
1789 ENUMX
1790   BFD_RELOC_SPARC_HM10
1791 ENUMX
1792   BFD_RELOC_SPARC_LM22
1793 ENUMX
1794   BFD_RELOC_SPARC_PC_HH22
1795 ENUMX
1796   BFD_RELOC_SPARC_PC_HM10
1797 ENUMX
1798   BFD_RELOC_SPARC_PC_LM22
1799 ENUMX
1800   BFD_RELOC_SPARC_WDISP16
1801 ENUMX
1802   BFD_RELOC_SPARC_WDISP19
1803 ENUMX
1804   BFD_RELOC_SPARC_7
1805 ENUMX
1806   BFD_RELOC_SPARC_6
1807 ENUMX
1808   BFD_RELOC_SPARC_5
1809 ENUMEQX
1810   BFD_RELOC_SPARC_DISP64
1811   BFD_RELOC_64_PCREL
1812 ENUMX
1813   BFD_RELOC_SPARC_PLT32
1814 ENUMX
1815   BFD_RELOC_SPARC_PLT64
1816 ENUMX
1817   BFD_RELOC_SPARC_HIX22
1818 ENUMX
1819   BFD_RELOC_SPARC_LOX10
1820 ENUMX
1821   BFD_RELOC_SPARC_H44
1822 ENUMX
1823   BFD_RELOC_SPARC_M44
1824 ENUMX
1825   BFD_RELOC_SPARC_L44
1826 ENUMX
1827   BFD_RELOC_SPARC_REGISTER
1828 ENUMDOC
1829   SPARC64 relocations
1830
1831 ENUM
1832   BFD_RELOC_SPARC_REV32
1833 ENUMDOC
1834   SPARC little endian relocation
1835 ENUM
1836   BFD_RELOC_SPARC_TLS_GD_HI22
1837 ENUMX
1838   BFD_RELOC_SPARC_TLS_GD_LO10
1839 ENUMX
1840   BFD_RELOC_SPARC_TLS_GD_ADD
1841 ENUMX
1842   BFD_RELOC_SPARC_TLS_GD_CALL
1843 ENUMX
1844   BFD_RELOC_SPARC_TLS_LDM_HI22
1845 ENUMX
1846   BFD_RELOC_SPARC_TLS_LDM_LO10
1847 ENUMX
1848   BFD_RELOC_SPARC_TLS_LDM_ADD
1849 ENUMX
1850   BFD_RELOC_SPARC_TLS_LDM_CALL
1851 ENUMX
1852   BFD_RELOC_SPARC_TLS_LDO_HIX22
1853 ENUMX
1854   BFD_RELOC_SPARC_TLS_LDO_LOX10
1855 ENUMX
1856   BFD_RELOC_SPARC_TLS_LDO_ADD
1857 ENUMX
1858   BFD_RELOC_SPARC_TLS_IE_HI22
1859 ENUMX
1860   BFD_RELOC_SPARC_TLS_IE_LO10
1861 ENUMX
1862   BFD_RELOC_SPARC_TLS_IE_LD
1863 ENUMX
1864   BFD_RELOC_SPARC_TLS_IE_LDX
1865 ENUMX
1866   BFD_RELOC_SPARC_TLS_IE_ADD
1867 ENUMX
1868   BFD_RELOC_SPARC_TLS_LE_HIX22
1869 ENUMX
1870   BFD_RELOC_SPARC_TLS_LE_LOX10
1871 ENUMX
1872   BFD_RELOC_SPARC_TLS_DTPMOD32
1873 ENUMX
1874   BFD_RELOC_SPARC_TLS_DTPMOD64
1875 ENUMX
1876   BFD_RELOC_SPARC_TLS_DTPOFF32
1877 ENUMX
1878   BFD_RELOC_SPARC_TLS_DTPOFF64
1879 ENUMX
1880   BFD_RELOC_SPARC_TLS_TPOFF32
1881 ENUMX
1882   BFD_RELOC_SPARC_TLS_TPOFF64
1883 ENUMDOC
1884   SPARC TLS relocations
1885
1886 ENUM
1887   BFD_RELOC_ALPHA_GPDISP_HI16
1888 ENUMDOC
1889   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
1890      "addend" in some special way.
1891   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1892      writing; when reading, it will be the absolute section symbol.  The
1893      addend is the displacement in bytes of the "lda" instruction from
1894      the "ldah" instruction (which is at the address of this reloc).
1895 ENUM
1896   BFD_RELOC_ALPHA_GPDISP_LO16
1897 ENUMDOC
1898   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1899      with GPDISP_HI16 relocs.  The addend is ignored when writing the
1900      relocations out, and is filled in with the file's GP value on
1901      reading, for convenience.
1902
1903 ENUM
1904   BFD_RELOC_ALPHA_GPDISP
1905 ENUMDOC
1906   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
1907      relocation except that there is no accompanying GPDISP_LO16
1908      relocation.
1909
1910 ENUM
1911   BFD_RELOC_ALPHA_LITERAL
1912 ENUMX
1913   BFD_RELOC_ALPHA_ELF_LITERAL
1914 ENUMX
1915   BFD_RELOC_ALPHA_LITUSE
1916 ENUMDOC
1917   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
1918      the assembler turns it into a LDQ instruction to load the address of
1919      the symbol, and then fills in a register in the real instruction.
1920
1921      The LITERAL reloc, at the LDQ instruction, refers to the .lita
1922      section symbol.  The addend is ignored when writing, but is filled
1923      in with the file's GP value on reading, for convenience, as with the
1924      GPDISP_LO16 reloc.
1925
1926      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
1927      It should refer to the symbol to be referenced, as with 16_GOTOFF,
1928      but it generates output not based on the position within the .got
1929      section, but relative to the GP value chosen for the file during the
1930      final link stage.
1931
1932      The LITUSE reloc, on the instruction using the loaded address, gives
1933      information to the linker that it might be able to use to optimize
1934      away some literal section references.  The symbol is ignored (read
1935      as the absolute section symbol), and the "addend" indicates the type
1936      of instruction using the register:
1937               1 - "memory" fmt insn
1938               2 - byte-manipulation (byte offset reg)
1939               3 - jsr (target of branch)
1940
1941 ENUM
1942   BFD_RELOC_ALPHA_HINT
1943 ENUMDOC
1944   The HINT relocation indicates a value that should be filled into the
1945      "hint" field of a jmp/jsr/ret instruction, for possible branch-
1946      prediction logic which may be provided on some processors.
1947
1948 ENUM
1949   BFD_RELOC_ALPHA_LINKAGE
1950 ENUMDOC
1951   The LINKAGE relocation outputs a linkage pair in the object file,
1952      which is filled by the linker.
1953
1954 ENUM
1955   BFD_RELOC_ALPHA_CODEADDR
1956 ENUMDOC
1957   The CODEADDR relocation outputs a STO_CA in the object file,
1958      which is filled by the linker.
1959
1960 ENUM
1961   BFD_RELOC_ALPHA_GPREL_HI16
1962 ENUMX
1963   BFD_RELOC_ALPHA_GPREL_LO16
1964 ENUMDOC
1965   The GPREL_HI/LO relocations together form a 32-bit offset from the
1966      GP register.
1967
1968 ENUM
1969   BFD_RELOC_ALPHA_BRSGP
1970 ENUMDOC
1971   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
1972   share a common GP, and the target address is adjusted for
1973   STO_ALPHA_STD_GPLOAD.
1974
1975 ENUM
1976   BFD_RELOC_ALPHA_TLSGD
1977 ENUMX
1978   BFD_RELOC_ALPHA_TLSLDM
1979 ENUMX
1980   BFD_RELOC_ALPHA_DTPMOD64
1981 ENUMX
1982   BFD_RELOC_ALPHA_GOTDTPREL16
1983 ENUMX
1984   BFD_RELOC_ALPHA_DTPREL64
1985 ENUMX
1986   BFD_RELOC_ALPHA_DTPREL_HI16
1987 ENUMX
1988   BFD_RELOC_ALPHA_DTPREL_LO16
1989 ENUMX
1990   BFD_RELOC_ALPHA_DTPREL16
1991 ENUMX
1992   BFD_RELOC_ALPHA_GOTTPREL16
1993 ENUMX
1994   BFD_RELOC_ALPHA_TPREL64
1995 ENUMX
1996   BFD_RELOC_ALPHA_TPREL_HI16
1997 ENUMX
1998   BFD_RELOC_ALPHA_TPREL_LO16
1999 ENUMX
2000   BFD_RELOC_ALPHA_TPREL16
2001 ENUMDOC
2002   Alpha thread-local storage relocations.
2003
2004 ENUM
2005   BFD_RELOC_MIPS_JMP
2006 ENUMDOC
2007   Bits 27..2 of the relocation address shifted right 2 bits;
2008      simple reloc otherwise.
2009
2010 ENUM
2011   BFD_RELOC_MIPS16_JMP
2012 ENUMDOC
2013   The MIPS16 jump instruction.
2014
2015 ENUM
2016   BFD_RELOC_MIPS16_GPREL
2017 ENUMDOC
2018   MIPS16 GP relative reloc.
2019
2020 ENUM
2021   BFD_RELOC_HI16
2022 ENUMDOC
2023   High 16 bits of 32-bit value; simple reloc.
2024 ENUM
2025   BFD_RELOC_HI16_S
2026 ENUMDOC
2027   High 16 bits of 32-bit value but the low 16 bits will be sign
2028      extended and added to form the final result.  If the low 16
2029      bits form a negative number, we need to add one to the high value
2030      to compensate for the borrow when the low bits are added.
2031 ENUM
2032   BFD_RELOC_LO16
2033 ENUMDOC
2034   Low 16 bits.
2035
2036 ENUM
2037   BFD_RELOC_HI16_PCREL
2038 ENUMDOC
2039   High 16 bits of 32-bit pc-relative value
2040 ENUM
2041   BFD_RELOC_HI16_S_PCREL
2042 ENUMDOC
2043   High 16 bits of 32-bit pc-relative value, adjusted
2044 ENUM
2045   BFD_RELOC_LO16_PCREL
2046 ENUMDOC
2047   Low 16 bits of pc-relative value
2048
2049 ENUM
2050   BFD_RELOC_MIPS16_HI16
2051 ENUMDOC
2052   MIPS16 high 16 bits of 32-bit value.
2053 ENUM
2054   BFD_RELOC_MIPS16_HI16_S
2055 ENUMDOC
2056   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2057      extended and added to form the final result.  If the low 16
2058      bits form a negative number, we need to add one to the high value
2059      to compensate for the borrow when the low bits are added.
2060 ENUM
2061   BFD_RELOC_MIPS16_LO16
2062 ENUMDOC
2063   MIPS16 low 16 bits.
2064
2065 ENUM
2066   BFD_RELOC_MIPS_LITERAL
2067 ENUMDOC
2068   Relocation against a MIPS literal section.
2069
2070 ENUM
2071   BFD_RELOC_MIPS_GOT16
2072 ENUMX
2073   BFD_RELOC_MIPS_CALL16
2074 ENUMX
2075   BFD_RELOC_MIPS_GOT_HI16
2076 ENUMX
2077   BFD_RELOC_MIPS_GOT_LO16
2078 ENUMX
2079   BFD_RELOC_MIPS_CALL_HI16
2080 ENUMX
2081   BFD_RELOC_MIPS_CALL_LO16
2082 ENUMX
2083   BFD_RELOC_MIPS_SUB
2084 ENUMX
2085   BFD_RELOC_MIPS_GOT_PAGE
2086 ENUMX
2087   BFD_RELOC_MIPS_GOT_OFST
2088 ENUMX
2089   BFD_RELOC_MIPS_GOT_DISP
2090 ENUMX
2091   BFD_RELOC_MIPS_SHIFT5
2092 ENUMX
2093   BFD_RELOC_MIPS_SHIFT6
2094 ENUMX
2095   BFD_RELOC_MIPS_INSERT_A
2096 ENUMX
2097   BFD_RELOC_MIPS_INSERT_B
2098 ENUMX
2099   BFD_RELOC_MIPS_DELETE
2100 ENUMX
2101   BFD_RELOC_MIPS_HIGHEST
2102 ENUMX
2103   BFD_RELOC_MIPS_HIGHER
2104 ENUMX
2105   BFD_RELOC_MIPS_SCN_DISP
2106 ENUMX
2107   BFD_RELOC_MIPS_REL16
2108 ENUMX
2109   BFD_RELOC_MIPS_RELGOT
2110 ENUMX
2111   BFD_RELOC_MIPS_JALR
2112 ENUMX
2113   BFD_RELOC_MIPS_TLS_DTPMOD32
2114 ENUMX
2115   BFD_RELOC_MIPS_TLS_DTPREL32
2116 ENUMX
2117   BFD_RELOC_MIPS_TLS_DTPMOD64
2118 ENUMX
2119   BFD_RELOC_MIPS_TLS_DTPREL64
2120 ENUMX
2121   BFD_RELOC_MIPS_TLS_GD
2122 ENUMX
2123   BFD_RELOC_MIPS_TLS_LDM
2124 ENUMX
2125   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2126 ENUMX
2127   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2128 ENUMX
2129   BFD_RELOC_MIPS_TLS_GOTTPREL
2130 ENUMX
2131   BFD_RELOC_MIPS_TLS_TPREL32
2132 ENUMX
2133   BFD_RELOC_MIPS_TLS_TPREL64
2134 ENUMX
2135   BFD_RELOC_MIPS_TLS_TPREL_HI16
2136 ENUMX
2137   BFD_RELOC_MIPS_TLS_TPREL_LO16
2138 ENUMDOC
2139   MIPS ELF relocations.
2140 COMMENT
2141
2142 ENUM
2143   BFD_RELOC_FRV_LABEL16
2144 ENUMX
2145   BFD_RELOC_FRV_LABEL24
2146 ENUMX
2147   BFD_RELOC_FRV_LO16
2148 ENUMX
2149   BFD_RELOC_FRV_HI16
2150 ENUMX
2151   BFD_RELOC_FRV_GPREL12
2152 ENUMX
2153   BFD_RELOC_FRV_GPRELU12
2154 ENUMX
2155   BFD_RELOC_FRV_GPREL32
2156 ENUMX
2157   BFD_RELOC_FRV_GPRELHI
2158 ENUMX
2159   BFD_RELOC_FRV_GPRELLO
2160 ENUMX
2161   BFD_RELOC_FRV_GOT12
2162 ENUMX
2163   BFD_RELOC_FRV_GOTHI
2164 ENUMX
2165   BFD_RELOC_FRV_GOTLO
2166 ENUMX
2167   BFD_RELOC_FRV_FUNCDESC
2168 ENUMX
2169   BFD_RELOC_FRV_FUNCDESC_GOT12
2170 ENUMX
2171   BFD_RELOC_FRV_FUNCDESC_GOTHI
2172 ENUMX
2173   BFD_RELOC_FRV_FUNCDESC_GOTLO
2174 ENUMX
2175   BFD_RELOC_FRV_FUNCDESC_VALUE
2176 ENUMX
2177   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2178 ENUMX
2179   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2180 ENUMX
2181   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2182 ENUMX
2183   BFD_RELOC_FRV_GOTOFF12
2184 ENUMX
2185   BFD_RELOC_FRV_GOTOFFHI
2186 ENUMX
2187   BFD_RELOC_FRV_GOTOFFLO
2188 ENUMX
2189   BFD_RELOC_FRV_GETTLSOFF
2190 ENUMX
2191   BFD_RELOC_FRV_TLSDESC_VALUE
2192 ENUMX
2193   BFD_RELOC_FRV_GOTTLSDESC12
2194 ENUMX
2195   BFD_RELOC_FRV_GOTTLSDESCHI
2196 ENUMX
2197   BFD_RELOC_FRV_GOTTLSDESCLO
2198 ENUMX
2199   BFD_RELOC_FRV_TLSMOFF12
2200 ENUMX
2201   BFD_RELOC_FRV_TLSMOFFHI
2202 ENUMX
2203   BFD_RELOC_FRV_TLSMOFFLO
2204 ENUMX
2205   BFD_RELOC_FRV_GOTTLSOFF12
2206 ENUMX
2207   BFD_RELOC_FRV_GOTTLSOFFHI
2208 ENUMX
2209   BFD_RELOC_FRV_GOTTLSOFFLO
2210 ENUMX
2211   BFD_RELOC_FRV_TLSOFF
2212 ENUMX
2213   BFD_RELOC_FRV_TLSDESC_RELAX
2214 ENUMX
2215   BFD_RELOC_FRV_GETTLSOFF_RELAX
2216 ENUMX
2217   BFD_RELOC_FRV_TLSOFF_RELAX
2218 ENUMX
2219   BFD_RELOC_FRV_TLSMOFF
2220 ENUMDOC
2221   Fujitsu Frv Relocations.
2222 COMMENT
2223
2224 ENUM
2225   BFD_RELOC_MN10300_GOTOFF24
2226 ENUMDOC
2227   This is a 24bit GOT-relative reloc for the mn10300.
2228 ENUM
2229   BFD_RELOC_MN10300_GOT32
2230 ENUMDOC
2231   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2232   in the instruction.
2233 ENUM
2234   BFD_RELOC_MN10300_GOT24
2235 ENUMDOC
2236   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2237   in the instruction.
2238 ENUM
2239   BFD_RELOC_MN10300_GOT16
2240 ENUMDOC
2241   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2242   in the instruction.
2243 ENUM
2244   BFD_RELOC_MN10300_COPY
2245 ENUMDOC
2246   Copy symbol at runtime.
2247 ENUM
2248   BFD_RELOC_MN10300_GLOB_DAT
2249 ENUMDOC
2250   Create GOT entry.
2251 ENUM
2252   BFD_RELOC_MN10300_JMP_SLOT
2253 ENUMDOC
2254   Create PLT entry.
2255 ENUM
2256   BFD_RELOC_MN10300_RELATIVE
2257 ENUMDOC
2258   Adjust by program base.
2259 COMMENT
2260
2261 ENUM
2262   BFD_RELOC_386_GOT32
2263 ENUMX
2264   BFD_RELOC_386_PLT32
2265 ENUMX
2266   BFD_RELOC_386_COPY
2267 ENUMX
2268   BFD_RELOC_386_GLOB_DAT
2269 ENUMX
2270   BFD_RELOC_386_JUMP_SLOT
2271 ENUMX
2272   BFD_RELOC_386_RELATIVE
2273 ENUMX
2274   BFD_RELOC_386_GOTOFF
2275 ENUMX
2276   BFD_RELOC_386_GOTPC
2277 ENUMX
2278   BFD_RELOC_386_TLS_TPOFF
2279 ENUMX
2280   BFD_RELOC_386_TLS_IE
2281 ENUMX
2282   BFD_RELOC_386_TLS_GOTIE
2283 ENUMX
2284   BFD_RELOC_386_TLS_LE
2285 ENUMX
2286   BFD_RELOC_386_TLS_GD
2287 ENUMX
2288   BFD_RELOC_386_TLS_LDM
2289 ENUMX
2290   BFD_RELOC_386_TLS_LDO_32
2291 ENUMX
2292   BFD_RELOC_386_TLS_IE_32
2293 ENUMX
2294   BFD_RELOC_386_TLS_LE_32
2295 ENUMX
2296   BFD_RELOC_386_TLS_DTPMOD32
2297 ENUMX
2298   BFD_RELOC_386_TLS_DTPOFF32
2299 ENUMX
2300   BFD_RELOC_386_TLS_TPOFF32
2301 ENUMX
2302   BFD_RELOC_386_TLS_GOTDESC
2303 ENUMX
2304   BFD_RELOC_386_TLS_DESC_CALL
2305 ENUMX
2306   BFD_RELOC_386_TLS_DESC
2307 ENUMDOC
2308   i386/elf relocations
2309
2310 ENUM
2311   BFD_RELOC_X86_64_GOT32
2312 ENUMX
2313   BFD_RELOC_X86_64_PLT32
2314 ENUMX
2315   BFD_RELOC_X86_64_COPY
2316 ENUMX
2317   BFD_RELOC_X86_64_GLOB_DAT
2318 ENUMX
2319   BFD_RELOC_X86_64_JUMP_SLOT
2320 ENUMX
2321   BFD_RELOC_X86_64_RELATIVE
2322 ENUMX
2323   BFD_RELOC_X86_64_GOTPCREL
2324 ENUMX
2325   BFD_RELOC_X86_64_32S
2326 ENUMX
2327   BFD_RELOC_X86_64_DTPMOD64
2328 ENUMX
2329   BFD_RELOC_X86_64_DTPOFF64
2330 ENUMX
2331   BFD_RELOC_X86_64_TPOFF64
2332 ENUMX
2333   BFD_RELOC_X86_64_TLSGD
2334 ENUMX
2335   BFD_RELOC_X86_64_TLSLD
2336 ENUMX
2337   BFD_RELOC_X86_64_DTPOFF32
2338 ENUMX
2339   BFD_RELOC_X86_64_GOTTPOFF
2340 ENUMX
2341   BFD_RELOC_X86_64_TPOFF32
2342 ENUMX
2343   BFD_RELOC_X86_64_GOTOFF64
2344 ENUMX
2345   BFD_RELOC_X86_64_GOTPC32
2346 ENUMX
2347   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2348 ENUMX
2349   BFD_RELOC_X86_64_TLSDESC_CALL
2350 ENUMX
2351   BFD_RELOC_X86_64_TLSDESC
2352 ENUMDOC
2353   x86-64/elf relocations
2354
2355 ENUM
2356   BFD_RELOC_NS32K_IMM_8
2357 ENUMX
2358   BFD_RELOC_NS32K_IMM_16
2359 ENUMX
2360   BFD_RELOC_NS32K_IMM_32
2361 ENUMX
2362   BFD_RELOC_NS32K_IMM_8_PCREL
2363 ENUMX
2364   BFD_RELOC_NS32K_IMM_16_PCREL
2365 ENUMX
2366   BFD_RELOC_NS32K_IMM_32_PCREL
2367 ENUMX
2368   BFD_RELOC_NS32K_DISP_8
2369 ENUMX
2370   BFD_RELOC_NS32K_DISP_16
2371 ENUMX
2372   BFD_RELOC_NS32K_DISP_32
2373 ENUMX
2374   BFD_RELOC_NS32K_DISP_8_PCREL
2375 ENUMX
2376   BFD_RELOC_NS32K_DISP_16_PCREL
2377 ENUMX
2378   BFD_RELOC_NS32K_DISP_32_PCREL
2379 ENUMDOC
2380   ns32k relocations
2381
2382 ENUM
2383   BFD_RELOC_PDP11_DISP_8_PCREL
2384 ENUMX
2385   BFD_RELOC_PDP11_DISP_6_PCREL
2386 ENUMDOC
2387   PDP11 relocations
2388
2389 ENUM
2390   BFD_RELOC_PJ_CODE_HI16
2391 ENUMX
2392   BFD_RELOC_PJ_CODE_LO16
2393 ENUMX
2394   BFD_RELOC_PJ_CODE_DIR16
2395 ENUMX
2396   BFD_RELOC_PJ_CODE_DIR32
2397 ENUMX
2398   BFD_RELOC_PJ_CODE_REL16
2399 ENUMX
2400   BFD_RELOC_PJ_CODE_REL32
2401 ENUMDOC
2402   Picojava relocs.  Not all of these appear in object files.
2403
2404 ENUM
2405   BFD_RELOC_PPC_B26
2406 ENUMX
2407   BFD_RELOC_PPC_BA26
2408 ENUMX
2409   BFD_RELOC_PPC_TOC16
2410 ENUMX
2411   BFD_RELOC_PPC_B16
2412 ENUMX
2413   BFD_RELOC_PPC_B16_BRTAKEN
2414 ENUMX
2415   BFD_RELOC_PPC_B16_BRNTAKEN
2416 ENUMX
2417   BFD_RELOC_PPC_BA16
2418 ENUMX
2419   BFD_RELOC_PPC_BA16_BRTAKEN
2420 ENUMX
2421   BFD_RELOC_PPC_BA16_BRNTAKEN
2422 ENUMX
2423   BFD_RELOC_PPC_COPY
2424 ENUMX
2425   BFD_RELOC_PPC_GLOB_DAT
2426 ENUMX
2427   BFD_RELOC_PPC_JMP_SLOT
2428 ENUMX
2429   BFD_RELOC_PPC_RELATIVE
2430 ENUMX
2431   BFD_RELOC_PPC_LOCAL24PC
2432 ENUMX
2433   BFD_RELOC_PPC_EMB_NADDR32
2434 ENUMX
2435   BFD_RELOC_PPC_EMB_NADDR16
2436 ENUMX
2437   BFD_RELOC_PPC_EMB_NADDR16_LO
2438 ENUMX
2439   BFD_RELOC_PPC_EMB_NADDR16_HI
2440 ENUMX
2441   BFD_RELOC_PPC_EMB_NADDR16_HA
2442 ENUMX
2443   BFD_RELOC_PPC_EMB_SDAI16
2444 ENUMX
2445   BFD_RELOC_PPC_EMB_SDA2I16
2446 ENUMX
2447   BFD_RELOC_PPC_EMB_SDA2REL
2448 ENUMX
2449   BFD_RELOC_PPC_EMB_SDA21
2450 ENUMX
2451   BFD_RELOC_PPC_EMB_MRKREF
2452 ENUMX
2453   BFD_RELOC_PPC_EMB_RELSEC16
2454 ENUMX
2455   BFD_RELOC_PPC_EMB_RELST_LO
2456 ENUMX
2457   BFD_RELOC_PPC_EMB_RELST_HI
2458 ENUMX
2459   BFD_RELOC_PPC_EMB_RELST_HA
2460 ENUMX
2461   BFD_RELOC_PPC_EMB_BIT_FLD
2462 ENUMX
2463   BFD_RELOC_PPC_EMB_RELSDA
2464 ENUMX
2465   BFD_RELOC_PPC64_HIGHER
2466 ENUMX
2467   BFD_RELOC_PPC64_HIGHER_S
2468 ENUMX
2469   BFD_RELOC_PPC64_HIGHEST
2470 ENUMX
2471   BFD_RELOC_PPC64_HIGHEST_S
2472 ENUMX
2473   BFD_RELOC_PPC64_TOC16_LO
2474 ENUMX
2475   BFD_RELOC_PPC64_TOC16_HI
2476 ENUMX
2477   BFD_RELOC_PPC64_TOC16_HA
2478 ENUMX
2479   BFD_RELOC_PPC64_TOC
2480 ENUMX
2481   BFD_RELOC_PPC64_PLTGOT16
2482 ENUMX
2483   BFD_RELOC_PPC64_PLTGOT16_LO
2484 ENUMX
2485   BFD_RELOC_PPC64_PLTGOT16_HI
2486 ENUMX
2487   BFD_RELOC_PPC64_PLTGOT16_HA
2488 ENUMX
2489   BFD_RELOC_PPC64_ADDR16_DS
2490 ENUMX
2491   BFD_RELOC_PPC64_ADDR16_LO_DS
2492 ENUMX
2493   BFD_RELOC_PPC64_GOT16_DS
2494 ENUMX
2495   BFD_RELOC_PPC64_GOT16_LO_DS
2496 ENUMX
2497   BFD_RELOC_PPC64_PLT16_LO_DS
2498 ENUMX
2499   BFD_RELOC_PPC64_SECTOFF_DS
2500 ENUMX
2501   BFD_RELOC_PPC64_SECTOFF_LO_DS
2502 ENUMX
2503   BFD_RELOC_PPC64_TOC16_DS
2504 ENUMX
2505   BFD_RELOC_PPC64_TOC16_LO_DS
2506 ENUMX
2507   BFD_RELOC_PPC64_PLTGOT16_DS
2508 ENUMX
2509   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2510 ENUMDOC
2511   Power(rs6000) and PowerPC relocations.
2512
2513 ENUM
2514   BFD_RELOC_PPC_TLS
2515 ENUMX
2516   BFD_RELOC_PPC_DTPMOD
2517 ENUMX
2518   BFD_RELOC_PPC_TPREL16
2519 ENUMX
2520   BFD_RELOC_PPC_TPREL16_LO
2521 ENUMX
2522   BFD_RELOC_PPC_TPREL16_HI
2523 ENUMX
2524   BFD_RELOC_PPC_TPREL16_HA
2525 ENUMX
2526   BFD_RELOC_PPC_TPREL
2527 ENUMX
2528   BFD_RELOC_PPC_DTPREL16
2529 ENUMX
2530   BFD_RELOC_PPC_DTPREL16_LO
2531 ENUMX
2532   BFD_RELOC_PPC_DTPREL16_HI
2533 ENUMX
2534   BFD_RELOC_PPC_DTPREL16_HA
2535 ENUMX
2536   BFD_RELOC_PPC_DTPREL
2537 ENUMX
2538   BFD_RELOC_PPC_GOT_TLSGD16
2539 ENUMX
2540   BFD_RELOC_PPC_GOT_TLSGD16_LO
2541 ENUMX
2542   BFD_RELOC_PPC_GOT_TLSGD16_HI
2543 ENUMX
2544   BFD_RELOC_PPC_GOT_TLSGD16_HA
2545 ENUMX
2546   BFD_RELOC_PPC_GOT_TLSLD16
2547 ENUMX
2548   BFD_RELOC_PPC_GOT_TLSLD16_LO
2549 ENUMX
2550   BFD_RELOC_PPC_GOT_TLSLD16_HI
2551 ENUMX
2552   BFD_RELOC_PPC_GOT_TLSLD16_HA
2553 ENUMX
2554   BFD_RELOC_PPC_GOT_TPREL16
2555 ENUMX
2556   BFD_RELOC_PPC_GOT_TPREL16_LO
2557 ENUMX
2558   BFD_RELOC_PPC_GOT_TPREL16_HI
2559 ENUMX
2560   BFD_RELOC_PPC_GOT_TPREL16_HA
2561 ENUMX
2562   BFD_RELOC_PPC_GOT_DTPREL16
2563 ENUMX
2564   BFD_RELOC_PPC_GOT_DTPREL16_LO
2565 ENUMX
2566   BFD_RELOC_PPC_GOT_DTPREL16_HI
2567 ENUMX
2568   BFD_RELOC_PPC_GOT_DTPREL16_HA
2569 ENUMX
2570   BFD_RELOC_PPC64_TPREL16_DS
2571 ENUMX
2572   BFD_RELOC_PPC64_TPREL16_LO_DS
2573 ENUMX
2574   BFD_RELOC_PPC64_TPREL16_HIGHER
2575 ENUMX
2576   BFD_RELOC_PPC64_TPREL16_HIGHERA
2577 ENUMX
2578   BFD_RELOC_PPC64_TPREL16_HIGHEST
2579 ENUMX
2580   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2581 ENUMX
2582   BFD_RELOC_PPC64_DTPREL16_DS
2583 ENUMX
2584   BFD_RELOC_PPC64_DTPREL16_LO_DS
2585 ENUMX
2586   BFD_RELOC_PPC64_DTPREL16_HIGHER
2587 ENUMX
2588   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2589 ENUMX
2590   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2591 ENUMX
2592   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2593 ENUMDOC
2594   PowerPC and PowerPC64 thread-local storage relocations.
2595
2596 ENUM
2597   BFD_RELOC_I370_D12
2598 ENUMDOC
2599   IBM 370/390 relocations
2600
2601 ENUM
2602   BFD_RELOC_CTOR
2603 ENUMDOC
2604   The type of reloc used to build a constructor table - at the moment
2605   probably a 32 bit wide absolute relocation, but the target can choose.
2606   It generally does map to one of the other relocation types.
2607
2608 ENUM
2609   BFD_RELOC_ARM_PCREL_BRANCH
2610 ENUMDOC
2611   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
2612   not stored in the instruction.
2613 ENUM
2614   BFD_RELOC_ARM_PCREL_BLX
2615 ENUMDOC
2616   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
2617   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2618   field in the instruction.
2619 ENUM
2620   BFD_RELOC_THUMB_PCREL_BLX
2621 ENUMDOC
2622   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
2623   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2624   field in the instruction.
2625 ENUM
2626   BFD_RELOC_ARM_PCREL_CALL
2627 ENUMDOC
2628   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
2629 ENUM
2630   BFD_RELOC_ARM_PCREL_JUMP
2631 ENUMDOC
2632   ARM 26-bit pc-relative branch for B or conditional BL instruction.
2633
2634 ENUM
2635   BFD_RELOC_THUMB_PCREL_BRANCH7
2636 ENUMX
2637   BFD_RELOC_THUMB_PCREL_BRANCH9
2638 ENUMX
2639   BFD_RELOC_THUMB_PCREL_BRANCH12
2640 ENUMX
2641   BFD_RELOC_THUMB_PCREL_BRANCH20
2642 ENUMX
2643   BFD_RELOC_THUMB_PCREL_BRANCH23
2644 ENUMX
2645   BFD_RELOC_THUMB_PCREL_BRANCH25
2646 ENUMDOC
2647   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
2648   The lowest bit must be zero and is not stored in the instruction.
2649   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
2650   "nn" one smaller in all cases.  Note further that BRANCH23
2651   corresponds to R_ARM_THM_CALL.
2652
2653 ENUM
2654   BFD_RELOC_ARM_OFFSET_IMM
2655 ENUMDOC
2656   12-bit immediate offset, used in ARM-format ldr and str instructions.
2657
2658 ENUM
2659   BFD_RELOC_ARM_THUMB_OFFSET
2660 ENUMDOC
2661   5-bit immediate offset, used in Thumb-format ldr and str instructions.
2662
2663 ENUM
2664   BFD_RELOC_ARM_TARGET1
2665 ENUMDOC
2666   Pc-relative or absolute relocation depending on target.  Used for
2667   entries in .init_array sections.
2668 ENUM
2669   BFD_RELOC_ARM_ROSEGREL32
2670 ENUMDOC
2671   Read-only segment base relative address.
2672 ENUM
2673   BFD_RELOC_ARM_SBREL32
2674 ENUMDOC
2675   Data segment base relative address.
2676 ENUM
2677   BFD_RELOC_ARM_TARGET2
2678 ENUMDOC
2679   This reloc is used for references to RTTI data from exception handling
2680   tables.  The actual definition depends on the target.  It may be a
2681   pc-relative or some form of GOT-indirect relocation.
2682 ENUM
2683   BFD_RELOC_ARM_PREL31
2684 ENUMDOC
2685   31-bit PC relative address.
2686
2687 ENUM
2688   BFD_RELOC_ARM_JUMP_SLOT
2689 ENUMX
2690   BFD_RELOC_ARM_GLOB_DAT
2691 ENUMX
2692   BFD_RELOC_ARM_GOT32
2693 ENUMX
2694   BFD_RELOC_ARM_PLT32
2695 ENUMX
2696   BFD_RELOC_ARM_RELATIVE
2697 ENUMX
2698   BFD_RELOC_ARM_GOTOFF
2699 ENUMX
2700   BFD_RELOC_ARM_GOTPC
2701 ENUMDOC
2702   Relocations for setting up GOTs and PLTs for shared libraries.
2703
2704 ENUM
2705   BFD_RELOC_ARM_TLS_GD32
2706 ENUMX
2707   BFD_RELOC_ARM_TLS_LDO32
2708 ENUMX
2709   BFD_RELOC_ARM_TLS_LDM32
2710 ENUMX
2711   BFD_RELOC_ARM_TLS_DTPOFF32
2712 ENUMX
2713   BFD_RELOC_ARM_TLS_DTPMOD32
2714 ENUMX
2715   BFD_RELOC_ARM_TLS_TPOFF32
2716 ENUMX
2717   BFD_RELOC_ARM_TLS_IE32
2718 ENUMX
2719   BFD_RELOC_ARM_TLS_LE32
2720 ENUMDOC
2721   ARM thread-local storage relocations.
2722
2723 ENUM
2724   BFD_RELOC_ARM_IMMEDIATE
2725 ENUMX
2726   BFD_RELOC_ARM_ADRL_IMMEDIATE
2727 ENUMX
2728   BFD_RELOC_ARM_T32_IMMEDIATE
2729 ENUMX
2730   BFD_RELOC_ARM_T32_IMM12
2731 ENUMX
2732   BFD_RELOC_ARM_T32_ADD_PC12
2733 ENUMX
2734   BFD_RELOC_ARM_SHIFT_IMM
2735 ENUMX
2736   BFD_RELOC_ARM_SMC
2737 ENUMX
2738   BFD_RELOC_ARM_SWI
2739 ENUMX
2740   BFD_RELOC_ARM_MULTI
2741 ENUMX
2742   BFD_RELOC_ARM_CP_OFF_IMM
2743 ENUMX
2744   BFD_RELOC_ARM_CP_OFF_IMM_S2
2745 ENUMX
2746   BFD_RELOC_ARM_T32_CP_OFF_IMM
2747 ENUMX
2748   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
2749 ENUMX
2750   BFD_RELOC_ARM_ADR_IMM
2751 ENUMX
2752   BFD_RELOC_ARM_LDR_IMM
2753 ENUMX
2754   BFD_RELOC_ARM_LITERAL
2755 ENUMX
2756   BFD_RELOC_ARM_IN_POOL
2757 ENUMX
2758   BFD_RELOC_ARM_OFFSET_IMM8
2759 ENUMX
2760   BFD_RELOC_ARM_T32_OFFSET_U8
2761 ENUMX
2762   BFD_RELOC_ARM_T32_OFFSET_IMM
2763 ENUMX
2764   BFD_RELOC_ARM_HWLITERAL
2765 ENUMX
2766   BFD_RELOC_ARM_THUMB_ADD
2767 ENUMX
2768   BFD_RELOC_ARM_THUMB_IMM
2769 ENUMX
2770   BFD_RELOC_ARM_THUMB_SHIFT
2771 ENUMDOC
2772   These relocs are only used within the ARM assembler.  They are not
2773   (at present) written to any object files.
2774
2775 ENUM
2776   BFD_RELOC_SH_PCDISP8BY2
2777 ENUMX
2778   BFD_RELOC_SH_PCDISP12BY2
2779 ENUMX
2780   BFD_RELOC_SH_IMM3
2781 ENUMX
2782   BFD_RELOC_SH_IMM3U
2783 ENUMX
2784   BFD_RELOC_SH_DISP12
2785 ENUMX
2786   BFD_RELOC_SH_DISP12BY2
2787 ENUMX
2788   BFD_RELOC_SH_DISP12BY4
2789 ENUMX
2790   BFD_RELOC_SH_DISP12BY8
2791 ENUMX
2792   BFD_RELOC_SH_DISP20
2793 ENUMX
2794   BFD_RELOC_SH_DISP20BY8
2795 ENUMX
2796   BFD_RELOC_SH_IMM4
2797 ENUMX
2798   BFD_RELOC_SH_IMM4BY2
2799 ENUMX
2800   BFD_RELOC_SH_IMM4BY4
2801 ENUMX
2802   BFD_RELOC_SH_IMM8
2803 ENUMX
2804   BFD_RELOC_SH_IMM8BY2
2805 ENUMX
2806   BFD_RELOC_SH_IMM8BY4
2807 ENUMX
2808   BFD_RELOC_SH_PCRELIMM8BY2
2809 ENUMX
2810   BFD_RELOC_SH_PCRELIMM8BY4
2811 ENUMX
2812   BFD_RELOC_SH_SWITCH16
2813 ENUMX
2814   BFD_RELOC_SH_SWITCH32
2815 ENUMX
2816   BFD_RELOC_SH_USES
2817 ENUMX
2818   BFD_RELOC_SH_COUNT
2819 ENUMX
2820   BFD_RELOC_SH_ALIGN
2821 ENUMX
2822   BFD_RELOC_SH_CODE
2823 ENUMX
2824   BFD_RELOC_SH_DATA
2825 ENUMX
2826   BFD_RELOC_SH_LABEL
2827 ENUMX
2828   BFD_RELOC_SH_LOOP_START
2829 ENUMX
2830   BFD_RELOC_SH_LOOP_END
2831 ENUMX
2832   BFD_RELOC_SH_COPY
2833 ENUMX
2834   BFD_RELOC_SH_GLOB_DAT
2835 ENUMX
2836   BFD_RELOC_SH_JMP_SLOT
2837 ENUMX
2838   BFD_RELOC_SH_RELATIVE
2839 ENUMX
2840   BFD_RELOC_SH_GOTPC
2841 ENUMX
2842   BFD_RELOC_SH_GOT_LOW16
2843 ENUMX
2844   BFD_RELOC_SH_GOT_MEDLOW16
2845 ENUMX
2846   BFD_RELOC_SH_GOT_MEDHI16
2847 ENUMX
2848   BFD_RELOC_SH_GOT_HI16
2849 ENUMX
2850   BFD_RELOC_SH_GOTPLT_LOW16
2851 ENUMX
2852   BFD_RELOC_SH_GOTPLT_MEDLOW16
2853 ENUMX
2854   BFD_RELOC_SH_GOTPLT_MEDHI16
2855 ENUMX
2856   BFD_RELOC_SH_GOTPLT_HI16
2857 ENUMX
2858   BFD_RELOC_SH_PLT_LOW16
2859 ENUMX
2860   BFD_RELOC_SH_PLT_MEDLOW16
2861 ENUMX
2862   BFD_RELOC_SH_PLT_MEDHI16
2863 ENUMX
2864   BFD_RELOC_SH_PLT_HI16
2865 ENUMX
2866   BFD_RELOC_SH_GOTOFF_LOW16
2867 ENUMX
2868   BFD_RELOC_SH_GOTOFF_MEDLOW16
2869 ENUMX
2870   BFD_RELOC_SH_GOTOFF_MEDHI16
2871 ENUMX
2872   BFD_RELOC_SH_GOTOFF_HI16
2873 ENUMX
2874   BFD_RELOC_SH_GOTPC_LOW16
2875 ENUMX
2876   BFD_RELOC_SH_GOTPC_MEDLOW16
2877 ENUMX
2878   BFD_RELOC_SH_GOTPC_MEDHI16
2879 ENUMX
2880   BFD_RELOC_SH_GOTPC_HI16
2881 ENUMX
2882   BFD_RELOC_SH_COPY64
2883 ENUMX
2884   BFD_RELOC_SH_GLOB_DAT64
2885 ENUMX
2886   BFD_RELOC_SH_JMP_SLOT64
2887 ENUMX
2888   BFD_RELOC_SH_RELATIVE64
2889 ENUMX
2890   BFD_RELOC_SH_GOT10BY4
2891 ENUMX
2892   BFD_RELOC_SH_GOT10BY8
2893 ENUMX
2894   BFD_RELOC_SH_GOTPLT10BY4
2895 ENUMX
2896   BFD_RELOC_SH_GOTPLT10BY8
2897 ENUMX
2898   BFD_RELOC_SH_GOTPLT32
2899 ENUMX
2900   BFD_RELOC_SH_SHMEDIA_CODE
2901 ENUMX
2902   BFD_RELOC_SH_IMMU5
2903 ENUMX
2904   BFD_RELOC_SH_IMMS6
2905 ENUMX
2906   BFD_RELOC_SH_IMMS6BY32
2907 ENUMX
2908   BFD_RELOC_SH_IMMU6
2909 ENUMX
2910   BFD_RELOC_SH_IMMS10
2911 ENUMX
2912   BFD_RELOC_SH_IMMS10BY2
2913 ENUMX
2914   BFD_RELOC_SH_IMMS10BY4
2915 ENUMX
2916   BFD_RELOC_SH_IMMS10BY8
2917 ENUMX
2918   BFD_RELOC_SH_IMMS16
2919 ENUMX
2920   BFD_RELOC_SH_IMMU16
2921 ENUMX
2922   BFD_RELOC_SH_IMM_LOW16
2923 ENUMX
2924   BFD_RELOC_SH_IMM_LOW16_PCREL
2925 ENUMX
2926   BFD_RELOC_SH_IMM_MEDLOW16
2927 ENUMX
2928   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
2929 ENUMX
2930   BFD_RELOC_SH_IMM_MEDHI16
2931 ENUMX
2932   BFD_RELOC_SH_IMM_MEDHI16_PCREL
2933 ENUMX
2934   BFD_RELOC_SH_IMM_HI16
2935 ENUMX
2936   BFD_RELOC_SH_IMM_HI16_PCREL
2937 ENUMX
2938   BFD_RELOC_SH_PT_16
2939 ENUMX
2940   BFD_RELOC_SH_TLS_GD_32
2941 ENUMX
2942   BFD_RELOC_SH_TLS_LD_32
2943 ENUMX
2944   BFD_RELOC_SH_TLS_LDO_32
2945 ENUMX
2946   BFD_RELOC_SH_TLS_IE_32
2947 ENUMX
2948   BFD_RELOC_SH_TLS_LE_32
2949 ENUMX
2950   BFD_RELOC_SH_TLS_DTPMOD32
2951 ENUMX
2952   BFD_RELOC_SH_TLS_DTPOFF32
2953 ENUMX
2954   BFD_RELOC_SH_TLS_TPOFF32
2955 ENUMDOC
2956   Renesas / SuperH SH relocs.  Not all of these appear in object files.
2957
2958 ENUM
2959   BFD_RELOC_ARC_B22_PCREL
2960 ENUMDOC
2961   ARC Cores relocs.
2962   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
2963   not stored in the instruction.  The high 20 bits are installed in bits 26
2964   through 7 of the instruction.
2965 ENUM
2966   BFD_RELOC_ARC_B26
2967 ENUMDOC
2968   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
2969   stored in the instruction.  The high 24 bits are installed in bits 23
2970   through 0.
2971
2972 ENUM
2973   BFD_RELOC_BFIN_16_IMM
2974 ENUMDOC
2975   ADI Blackfin 16 bit immediate absolute reloc.
2976 ENUM
2977   BFD_RELOC_BFIN_16_HIGH
2978 ENUMDOC
2979   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
2980 ENUM
2981   BFD_RELOC_BFIN_4_PCREL
2982 ENUMDOC
2983   ADI Blackfin 'a' part of LSETUP.
2984 ENUM
2985   BFD_RELOC_BFIN_5_PCREL
2986 ENUMDOC
2987   ADI Blackfin.
2988 ENUM
2989   BFD_RELOC_BFIN_16_LOW
2990 ENUMDOC
2991   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
2992 ENUM
2993   BFD_RELOC_BFIN_10_PCREL
2994 ENUMDOC
2995   ADI Blackfin.
2996 ENUM
2997   BFD_RELOC_BFIN_11_PCREL
2998 ENUMDOC
2999   ADI Blackfin 'b' part of LSETUP.
3000 ENUM
3001   BFD_RELOC_BFIN_12_PCREL_JUMP
3002 ENUMDOC
3003   ADI Blackfin.
3004 ENUM
3005   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3006 ENUMDOC
3007   ADI Blackfin Short jump, pcrel.
3008 ENUM
3009   BFD_RELOC_BFIN_24_PCREL_CALL_X
3010 ENUMDOC
3011   ADI Blackfin Call.x not implemented.
3012 ENUM
3013   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3014 ENUMDOC
3015   ADI Blackfin Long Jump pcrel.
3016 ENUM
3017   BFD_RELOC_BFIN_GOT
3018 ENUMDOC
3019   ADI Blackfin GOT relocation.
3020 ENUM
3021   BFD_RELOC_BFIN_PLTPC
3022 ENUMDOC
3023   ADI Blackfin PLTPC relocation.
3024 ENUM
3025   BFD_ARELOC_BFIN_PUSH
3026 ENUMDOC
3027   ADI Blackfin arithmetic relocation.
3028 ENUM
3029   BFD_ARELOC_BFIN_CONST
3030 ENUMDOC
3031   ADI Blackfin arithmetic relocation.
3032 ENUM
3033   BFD_ARELOC_BFIN_ADD
3034 ENUMDOC
3035   ADI Blackfin arithmetic relocation.
3036 ENUM
3037   BFD_ARELOC_BFIN_SUB
3038 ENUMDOC
3039   ADI Blackfin arithmetic relocation.
3040 ENUM
3041   BFD_ARELOC_BFIN_MULT
3042 ENUMDOC
3043   ADI Blackfin arithmetic relocation.
3044 ENUM
3045   BFD_ARELOC_BFIN_DIV
3046 ENUMDOC
3047   ADI Blackfin arithmetic relocation.
3048 ENUM
3049   BFD_ARELOC_BFIN_MOD
3050 ENUMDOC
3051   ADI Blackfin arithmetic relocation.
3052 ENUM
3053   BFD_ARELOC_BFIN_LSHIFT
3054 ENUMDOC
3055   ADI Blackfin arithmetic relocation.
3056 ENUM
3057   BFD_ARELOC_BFIN_RSHIFT
3058 ENUMDOC
3059   ADI Blackfin arithmetic relocation.
3060 ENUM
3061   BFD_ARELOC_BFIN_AND
3062 ENUMDOC
3063   ADI Blackfin arithmetic relocation.
3064 ENUM
3065   BFD_ARELOC_BFIN_OR
3066 ENUMDOC
3067   ADI Blackfin arithmetic relocation.
3068 ENUM
3069   BFD_ARELOC_BFIN_XOR
3070 ENUMDOC
3071   ADI Blackfin arithmetic relocation.
3072 ENUM
3073   BFD_ARELOC_BFIN_LAND
3074 ENUMDOC
3075   ADI Blackfin arithmetic relocation.
3076 ENUM
3077   BFD_ARELOC_BFIN_LOR
3078 ENUMDOC
3079   ADI Blackfin arithmetic relocation.
3080 ENUM
3081   BFD_ARELOC_BFIN_LEN
3082 ENUMDOC
3083   ADI Blackfin arithmetic relocation.
3084 ENUM
3085   BFD_ARELOC_BFIN_NEG
3086 ENUMDOC
3087   ADI Blackfin arithmetic relocation.
3088 ENUM
3089   BFD_ARELOC_BFIN_COMP
3090 ENUMDOC
3091   ADI Blackfin arithmetic relocation.
3092 ENUM
3093   BFD_ARELOC_BFIN_PAGE
3094 ENUMDOC
3095   ADI Blackfin arithmetic relocation.
3096 ENUM
3097   BFD_ARELOC_BFIN_HWPAGE
3098 ENUMDOC
3099   ADI Blackfin arithmetic relocation.
3100 ENUM
3101   BFD_ARELOC_BFIN_ADDR
3102 ENUMDOC
3103   ADI Blackfin arithmetic relocation.
3104
3105 ENUM
3106   BFD_RELOC_D10V_10_PCREL_R
3107 ENUMDOC
3108   Mitsubishi D10V relocs.
3109   This is a 10-bit reloc with the right 2 bits
3110   assumed to be 0.
3111 ENUM
3112   BFD_RELOC_D10V_10_PCREL_L
3113 ENUMDOC
3114   Mitsubishi D10V relocs.
3115   This is a 10-bit reloc with the right 2 bits
3116   assumed to be 0.  This is the same as the previous reloc
3117   except it is in the left container, i.e.,
3118   shifted left 15 bits.
3119 ENUM
3120   BFD_RELOC_D10V_18
3121 ENUMDOC
3122   This is an 18-bit reloc with the right 2 bits
3123   assumed to be 0.
3124 ENUM
3125   BFD_RELOC_D10V_18_PCREL
3126 ENUMDOC
3127   This is an 18-bit reloc with the right 2 bits
3128   assumed to be 0.
3129
3130 ENUM
3131   BFD_RELOC_D30V_6
3132 ENUMDOC
3133   Mitsubishi D30V relocs.
3134   This is a 6-bit absolute reloc.
3135 ENUM
3136   BFD_RELOC_D30V_9_PCREL
3137 ENUMDOC
3138   This is a 6-bit pc-relative reloc with
3139   the right 3 bits assumed to be 0.
3140 ENUM
3141   BFD_RELOC_D30V_9_PCREL_R
3142 ENUMDOC
3143   This is a 6-bit pc-relative reloc with
3144   the right 3 bits assumed to be 0. Same
3145   as the previous reloc but on the right side
3146   of the container.
3147 ENUM
3148   BFD_RELOC_D30V_15
3149 ENUMDOC
3150   This is a 12-bit absolute reloc with the
3151   right 3 bitsassumed to be 0.
3152 ENUM
3153   BFD_RELOC_D30V_15_PCREL
3154 ENUMDOC
3155   This is a 12-bit pc-relative reloc with
3156   the right 3 bits assumed to be 0.
3157 ENUM
3158   BFD_RELOC_D30V_15_PCREL_R
3159 ENUMDOC
3160   This is a 12-bit pc-relative reloc with
3161   the right 3 bits assumed to be 0. Same
3162   as the previous reloc but on the right side
3163   of the container.
3164 ENUM
3165   BFD_RELOC_D30V_21
3166 ENUMDOC
3167   This is an 18-bit absolute reloc with
3168   the right 3 bits assumed to be 0.
3169 ENUM
3170   BFD_RELOC_D30V_21_PCREL
3171 ENUMDOC
3172   This is an 18-bit pc-relative reloc with
3173   the right 3 bits assumed to be 0.
3174 ENUM
3175   BFD_RELOC_D30V_21_PCREL_R
3176 ENUMDOC
3177   This is an 18-bit pc-relative reloc with
3178   the right 3 bits assumed to be 0. Same
3179   as the previous reloc but on the right side
3180   of the container.
3181 ENUM
3182   BFD_RELOC_D30V_32
3183 ENUMDOC
3184   This is a 32-bit absolute reloc.
3185 ENUM
3186   BFD_RELOC_D30V_32_PCREL
3187 ENUMDOC
3188   This is a 32-bit pc-relative reloc.
3189
3190 ENUM
3191   BFD_RELOC_DLX_HI16_S
3192 ENUMDOC
3193   DLX relocs
3194 ENUM
3195   BFD_RELOC_DLX_LO16
3196 ENUMDOC
3197   DLX relocs
3198 ENUM
3199   BFD_RELOC_DLX_JMP26
3200 ENUMDOC
3201   DLX relocs
3202
3203 ENUM
3204   BFD_RELOC_M32C_HI8
3205 ENUMX
3206   BFD_RELOC_M32C_RL_JUMP
3207 ENUMX
3208   BFD_RELOC_M32C_RL_1ADDR
3209 ENUMX
3210   BFD_RELOC_M32C_RL_2ADDR
3211 ENUMDOC
3212   Renesas M16C/M32C Relocations.
3213
3214 ENUM
3215   BFD_RELOC_M32R_24
3216 ENUMDOC
3217   Renesas M32R (formerly Mitsubishi M32R) relocs.
3218   This is a 24 bit absolute address.
3219 ENUM
3220   BFD_RELOC_M32R_10_PCREL
3221 ENUMDOC
3222   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3223 ENUM
3224   BFD_RELOC_M32R_18_PCREL
3225 ENUMDOC
3226   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3227 ENUM
3228   BFD_RELOC_M32R_26_PCREL
3229 ENUMDOC
3230   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3231 ENUM
3232   BFD_RELOC_M32R_HI16_ULO
3233 ENUMDOC
3234   This is a 16-bit reloc containing the high 16 bits of an address
3235   used when the lower 16 bits are treated as unsigned.
3236 ENUM
3237   BFD_RELOC_M32R_HI16_SLO
3238 ENUMDOC
3239   This is a 16-bit reloc containing the high 16 bits of an address
3240   used when the lower 16 bits are treated as signed.
3241 ENUM
3242   BFD_RELOC_M32R_LO16
3243 ENUMDOC
3244   This is a 16-bit reloc containing the lower 16 bits of an address.
3245 ENUM
3246   BFD_RELOC_M32R_SDA16
3247 ENUMDOC
3248   This is a 16-bit reloc containing the small data area offset for use in
3249   add3, load, and store instructions.
3250 ENUM
3251   BFD_RELOC_M32R_GOT24
3252 ENUMX
3253   BFD_RELOC_M32R_26_PLTREL
3254 ENUMX
3255   BFD_RELOC_M32R_COPY
3256 ENUMX
3257   BFD_RELOC_M32R_GLOB_DAT
3258 ENUMX
3259   BFD_RELOC_M32R_JMP_SLOT
3260 ENUMX
3261   BFD_RELOC_M32R_RELATIVE
3262 ENUMX
3263   BFD_RELOC_M32R_GOTOFF
3264 ENUMX
3265   BFD_RELOC_M32R_GOTOFF_HI_ULO
3266 ENUMX
3267   BFD_RELOC_M32R_GOTOFF_HI_SLO
3268 ENUMX
3269   BFD_RELOC_M32R_GOTOFF_LO
3270 ENUMX
3271   BFD_RELOC_M32R_GOTPC24
3272 ENUMX
3273   BFD_RELOC_M32R_GOT16_HI_ULO
3274 ENUMX
3275   BFD_RELOC_M32R_GOT16_HI_SLO
3276 ENUMX
3277   BFD_RELOC_M32R_GOT16_LO
3278 ENUMX
3279   BFD_RELOC_M32R_GOTPC_HI_ULO
3280 ENUMX
3281   BFD_RELOC_M32R_GOTPC_HI_SLO
3282 ENUMX
3283   BFD_RELOC_M32R_GOTPC_LO
3284 ENUMDOC
3285   For PIC.
3286
3287
3288 ENUM
3289   BFD_RELOC_V850_9_PCREL
3290 ENUMDOC
3291   This is a 9-bit reloc
3292 ENUM
3293   BFD_RELOC_V850_22_PCREL
3294 ENUMDOC
3295   This is a 22-bit reloc
3296
3297 ENUM
3298   BFD_RELOC_V850_SDA_16_16_OFFSET
3299 ENUMDOC
3300   This is a 16 bit offset from the short data area pointer.
3301 ENUM
3302   BFD_RELOC_V850_SDA_15_16_OFFSET
3303 ENUMDOC
3304   This is a 16 bit offset (of which only 15 bits are used) from the
3305   short data area pointer.
3306 ENUM
3307   BFD_RELOC_V850_ZDA_16_16_OFFSET
3308 ENUMDOC
3309   This is a 16 bit offset from the zero data area pointer.
3310 ENUM
3311   BFD_RELOC_V850_ZDA_15_16_OFFSET
3312 ENUMDOC
3313   This is a 16 bit offset (of which only 15 bits are used) from the
3314   zero data area pointer.
3315 ENUM
3316   BFD_RELOC_V850_TDA_6_8_OFFSET
3317 ENUMDOC
3318   This is an 8 bit offset (of which only 6 bits are used) from the
3319   tiny data area pointer.
3320 ENUM
3321   BFD_RELOC_V850_TDA_7_8_OFFSET
3322 ENUMDOC
3323   This is an 8bit offset (of which only 7 bits are used) from the tiny
3324   data area pointer.
3325 ENUM
3326   BFD_RELOC_V850_TDA_7_7_OFFSET
3327 ENUMDOC
3328   This is a 7 bit offset from the tiny data area pointer.
3329 ENUM
3330   BFD_RELOC_V850_TDA_16_16_OFFSET
3331 ENUMDOC
3332   This is a 16 bit offset from the tiny data area pointer.
3333 COMMENT
3334 ENUM
3335   BFD_RELOC_V850_TDA_4_5_OFFSET
3336 ENUMDOC
3337   This is a 5 bit offset (of which only 4 bits are used) from the tiny
3338   data area pointer.
3339 ENUM
3340   BFD_RELOC_V850_TDA_4_4_OFFSET
3341 ENUMDOC
3342   This is a 4 bit offset from the tiny data area pointer.
3343 ENUM
3344   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3345 ENUMDOC
3346   This is a 16 bit offset from the short data area pointer, with the
3347   bits placed non-contiguously in the instruction.
3348 ENUM
3349   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3350 ENUMDOC
3351   This is a 16 bit offset from the zero data area pointer, with the
3352   bits placed non-contiguously in the instruction.
3353 ENUM
3354   BFD_RELOC_V850_CALLT_6_7_OFFSET
3355 ENUMDOC
3356   This is a 6 bit offset from the call table base pointer.
3357 ENUM
3358   BFD_RELOC_V850_CALLT_16_16_OFFSET
3359 ENUMDOC
3360   This is a 16 bit offset from the call table base pointer.
3361 ENUM
3362   BFD_RELOC_V850_LONGCALL
3363 ENUMDOC
3364   Used for relaxing indirect function calls.
3365 ENUM
3366   BFD_RELOC_V850_LONGJUMP
3367 ENUMDOC
3368   Used for relaxing indirect jumps.
3369 ENUM
3370   BFD_RELOC_V850_ALIGN
3371 ENUMDOC
3372   Used to maintain alignment whilst relaxing.
3373 ENUM
3374   BFD_RELOC_V850_LO16_SPLIT_OFFSET
3375 ENUMDOC
3376   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3377   instructions.
3378 ENUM
3379   BFD_RELOC_MN10300_32_PCREL
3380 ENUMDOC
3381   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
3382   instruction.
3383 ENUM
3384   BFD_RELOC_MN10300_16_PCREL
3385 ENUMDOC
3386   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
3387   instruction.
3388
3389 ENUM
3390   BFD_RELOC_TIC30_LDP
3391 ENUMDOC
3392   This is a 8bit DP reloc for the tms320c30, where the most
3393   significant 8 bits of a 24 bit word are placed into the least
3394   significant 8 bits of the opcode.
3395
3396 ENUM
3397   BFD_RELOC_TIC54X_PARTLS7
3398 ENUMDOC
3399   This is a 7bit reloc for the tms320c54x, where the least
3400   significant 7 bits of a 16 bit word are placed into the least
3401   significant 7 bits of the opcode.
3402
3403 ENUM
3404   BFD_RELOC_TIC54X_PARTMS9
3405 ENUMDOC
3406   This is a 9bit DP reloc for the tms320c54x, where the most
3407   significant 9 bits of a 16 bit word are placed into the least
3408   significant 9 bits of the opcode.
3409
3410 ENUM
3411   BFD_RELOC_TIC54X_23
3412 ENUMDOC
3413   This is an extended address 23-bit reloc for the tms320c54x.
3414
3415 ENUM
3416   BFD_RELOC_TIC54X_16_OF_23
3417 ENUMDOC
3418   This is a 16-bit reloc for the tms320c54x, where the least
3419   significant 16 bits of a 23-bit extended address are placed into
3420   the opcode.
3421
3422 ENUM
3423   BFD_RELOC_TIC54X_MS7_OF_23
3424 ENUMDOC
3425   This is a reloc for the tms320c54x, where the most
3426   significant 7 bits of a 23-bit extended address are placed into
3427   the opcode.
3428
3429 ENUM
3430   BFD_RELOC_FR30_48
3431 ENUMDOC
3432   This is a 48 bit reloc for the FR30 that stores 32 bits.
3433 ENUM
3434   BFD_RELOC_FR30_20
3435 ENUMDOC
3436   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
3437   two sections.
3438 ENUM
3439   BFD_RELOC_FR30_6_IN_4
3440 ENUMDOC
3441   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
3442   4 bits.
3443 ENUM
3444   BFD_RELOC_FR30_8_IN_8
3445 ENUMDOC
3446   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
3447   into 8 bits.
3448 ENUM
3449   BFD_RELOC_FR30_9_IN_8
3450 ENUMDOC
3451   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
3452   into 8 bits.
3453 ENUM
3454   BFD_RELOC_FR30_10_IN_8
3455 ENUMDOC
3456   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
3457   into 8 bits.
3458 ENUM
3459   BFD_RELOC_FR30_9_PCREL
3460 ENUMDOC
3461   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
3462   short offset into 8 bits.
3463 ENUM
3464   BFD_RELOC_FR30_12_PCREL
3465 ENUMDOC
3466   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
3467   short offset into 11 bits.
3468
3469 ENUM
3470   BFD_RELOC_MCORE_PCREL_IMM8BY4
3471 ENUMX
3472   BFD_RELOC_MCORE_PCREL_IMM11BY2
3473 ENUMX
3474   BFD_RELOC_MCORE_PCREL_IMM4BY2
3475 ENUMX
3476   BFD_RELOC_MCORE_PCREL_32
3477 ENUMX
3478   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
3479 ENUMX
3480   BFD_RELOC_MCORE_RVA
3481 ENUMDOC
3482   Motorola Mcore relocations.
3483
3484 ENUM
3485   BFD_RELOC_MMIX_GETA
3486 ENUMX
3487   BFD_RELOC_MMIX_GETA_1
3488 ENUMX
3489   BFD_RELOC_MMIX_GETA_2
3490 ENUMX
3491   BFD_RELOC_MMIX_GETA_3
3492 ENUMDOC
3493   These are relocations for the GETA instruction.
3494 ENUM
3495   BFD_RELOC_MMIX_CBRANCH
3496 ENUMX
3497   BFD_RELOC_MMIX_CBRANCH_J
3498 ENUMX
3499   BFD_RELOC_MMIX_CBRANCH_1
3500 ENUMX
3501   BFD_RELOC_MMIX_CBRANCH_2
3502 ENUMX
3503   BFD_RELOC_MMIX_CBRANCH_3
3504 ENUMDOC
3505   These are relocations for a conditional branch instruction.
3506 ENUM
3507   BFD_RELOC_MMIX_PUSHJ
3508 ENUMX
3509   BFD_RELOC_MMIX_PUSHJ_1
3510 ENUMX
3511   BFD_RELOC_MMIX_PUSHJ_2
3512 ENUMX
3513   BFD_RELOC_MMIX_PUSHJ_3
3514 ENUMX
3515   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
3516 ENUMDOC
3517   These are relocations for the PUSHJ instruction.
3518 ENUM
3519   BFD_RELOC_MMIX_JMP
3520 ENUMX
3521   BFD_RELOC_MMIX_JMP_1
3522 ENUMX
3523   BFD_RELOC_MMIX_JMP_2
3524 ENUMX
3525   BFD_RELOC_MMIX_JMP_3
3526 ENUMDOC
3527   These are relocations for the JMP instruction.
3528 ENUM
3529   BFD_RELOC_MMIX_ADDR19
3530 ENUMDOC
3531   This is a relocation for a relative address as in a GETA instruction or
3532   a branch.
3533 ENUM
3534   BFD_RELOC_MMIX_ADDR27
3535 ENUMDOC
3536   This is a relocation for a relative address as in a JMP instruction.
3537 ENUM
3538   BFD_RELOC_MMIX_REG_OR_BYTE
3539 ENUMDOC
3540   This is a relocation for an instruction field that may be a general
3541   register or a value 0..255.
3542 ENUM
3543   BFD_RELOC_MMIX_REG
3544 ENUMDOC
3545   This is a relocation for an instruction field that may be a general
3546   register.
3547 ENUM
3548   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
3549 ENUMDOC
3550   This is a relocation for two instruction fields holding a register and
3551   an offset, the equivalent of the relocation.
3552 ENUM
3553   BFD_RELOC_MMIX_LOCAL
3554 ENUMDOC
3555   This relocation is an assertion that the expression is not allocated as
3556   a global register.  It does not modify contents.
3557
3558 ENUM
3559   BFD_RELOC_AVR_7_PCREL
3560 ENUMDOC
3561   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
3562   short offset into 7 bits.
3563 ENUM
3564   BFD_RELOC_AVR_13_PCREL
3565 ENUMDOC
3566   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
3567   short offset into 12 bits.
3568 ENUM
3569   BFD_RELOC_AVR_16_PM
3570 ENUMDOC
3571   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
3572   program memory address) into 16 bits.
3573 ENUM
3574   BFD_RELOC_AVR_LO8_LDI
3575 ENUMDOC
3576   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3577   data memory address) into 8 bit immediate value of LDI insn.
3578 ENUM
3579   BFD_RELOC_AVR_HI8_LDI
3580 ENUMDOC
3581   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3582   of data memory address) into 8 bit immediate value of LDI insn.
3583 ENUM
3584   BFD_RELOC_AVR_HH8_LDI
3585 ENUMDOC
3586   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3587   of program memory address) into 8 bit immediate value of LDI insn.
3588 ENUM
3589   BFD_RELOC_AVR_LO8_LDI_NEG
3590 ENUMDOC
3591   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3592   (usually data memory address) into 8 bit immediate value of SUBI insn.
3593 ENUM
3594   BFD_RELOC_AVR_HI8_LDI_NEG
3595 ENUMDOC
3596   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3597   (high 8 bit of data memory address) into 8 bit immediate value of
3598   SUBI insn.
3599 ENUM
3600   BFD_RELOC_AVR_HH8_LDI_NEG
3601 ENUMDOC
3602   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3603   (most high 8 bit of program memory address) into 8 bit immediate value
3604   of LDI or SUBI insn.
3605 ENUM
3606   BFD_RELOC_AVR_LO8_LDI_PM
3607 ENUMDOC
3608   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3609   command address) into 8 bit immediate value of LDI insn.
3610 ENUM
3611   BFD_RELOC_AVR_HI8_LDI_PM
3612 ENUMDOC
3613   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3614   of command address) into 8 bit immediate value of LDI insn.
3615 ENUM
3616   BFD_RELOC_AVR_HH8_LDI_PM
3617 ENUMDOC
3618   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3619   of command address) into 8 bit immediate value of LDI insn.
3620 ENUM
3621   BFD_RELOC_AVR_LO8_LDI_PM_NEG
3622 ENUMDOC
3623   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3624   (usually command address) into 8 bit immediate value of SUBI insn.
3625 ENUM
3626   BFD_RELOC_AVR_HI8_LDI_PM_NEG
3627 ENUMDOC
3628   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3629   (high 8 bit of 16 bit command address) into 8 bit immediate value
3630   of SUBI insn.
3631 ENUM
3632   BFD_RELOC_AVR_HH8_LDI_PM_NEG
3633 ENUMDOC
3634   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3635   (high 6 bit of 22 bit command address) into 8 bit immediate
3636   value of SUBI insn.
3637 ENUM
3638   BFD_RELOC_AVR_CALL
3639 ENUMDOC
3640   This is a 32 bit reloc for the AVR that stores 23 bit value
3641   into 22 bits.
3642 ENUM
3643   BFD_RELOC_AVR_LDI
3644 ENUMDOC
3645   This is a 16 bit reloc for the AVR that stores all needed bits
3646   for absolute addressing with ldi with overflow check to linktime
3647 ENUM
3648   BFD_RELOC_AVR_6
3649 ENUMDOC
3650   This is a 6 bit reloc for the AVR that stores offset for ldd/std
3651   instructions
3652 ENUM
3653   BFD_RELOC_AVR_6_ADIW
3654 ENUMDOC
3655   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
3656   instructions
3657
3658 ENUM
3659   BFD_RELOC_390_12
3660 ENUMDOC
3661    Direct 12 bit.
3662 ENUM
3663   BFD_RELOC_390_GOT12
3664 ENUMDOC
3665   12 bit GOT offset.
3666 ENUM
3667   BFD_RELOC_390_PLT32
3668 ENUMDOC
3669   32 bit PC relative PLT address.
3670 ENUM
3671   BFD_RELOC_390_COPY
3672 ENUMDOC
3673   Copy symbol at runtime.
3674 ENUM
3675   BFD_RELOC_390_GLOB_DAT
3676 ENUMDOC
3677   Create GOT entry.
3678 ENUM
3679   BFD_RELOC_390_JMP_SLOT
3680 ENUMDOC
3681   Create PLT entry.
3682 ENUM
3683   BFD_RELOC_390_RELATIVE
3684 ENUMDOC
3685   Adjust by program base.
3686 ENUM
3687   BFD_RELOC_390_GOTPC
3688 ENUMDOC
3689   32 bit PC relative offset to GOT.
3690 ENUM
3691   BFD_RELOC_390_GOT16
3692 ENUMDOC
3693   16 bit GOT offset.
3694 ENUM
3695   BFD_RELOC_390_PC16DBL
3696 ENUMDOC
3697   PC relative 16 bit shifted by 1.
3698 ENUM
3699   BFD_RELOC_390_PLT16DBL
3700 ENUMDOC
3701   16 bit PC rel. PLT shifted by 1.
3702 ENUM
3703   BFD_RELOC_390_PC32DBL
3704 ENUMDOC
3705   PC relative 32 bit shifted by 1.
3706 ENUM
3707   BFD_RELOC_390_PLT32DBL
3708 ENUMDOC
3709   32 bit PC rel. PLT shifted by 1.
3710 ENUM
3711   BFD_RELOC_390_GOTPCDBL
3712 ENUMDOC
3713   32 bit PC rel. GOT shifted by 1.
3714 ENUM
3715   BFD_RELOC_390_GOT64
3716 ENUMDOC
3717   64 bit GOT offset.
3718 ENUM
3719   BFD_RELOC_390_PLT64
3720 ENUMDOC
3721   64 bit PC relative PLT address.
3722 ENUM
3723   BFD_RELOC_390_GOTENT
3724 ENUMDOC
3725   32 bit rel. offset to GOT entry.
3726 ENUM
3727   BFD_RELOC_390_GOTOFF64
3728 ENUMDOC
3729   64 bit offset to GOT.
3730 ENUM
3731   BFD_RELOC_390_GOTPLT12
3732 ENUMDOC
3733   12-bit offset to symbol-entry within GOT, with PLT handling.
3734 ENUM
3735   BFD_RELOC_390_GOTPLT16
3736 ENUMDOC
3737   16-bit offset to symbol-entry within GOT, with PLT handling.
3738 ENUM
3739   BFD_RELOC_390_GOTPLT32
3740 ENUMDOC
3741   32-bit offset to symbol-entry within GOT, with PLT handling.
3742 ENUM
3743   BFD_RELOC_390_GOTPLT64
3744 ENUMDOC
3745   64-bit offset to symbol-entry within GOT, with PLT handling.
3746 ENUM
3747   BFD_RELOC_390_GOTPLTENT
3748 ENUMDOC
3749   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
3750 ENUM
3751   BFD_RELOC_390_PLTOFF16
3752 ENUMDOC
3753   16-bit rel. offset from the GOT to a PLT entry.
3754 ENUM
3755   BFD_RELOC_390_PLTOFF32
3756 ENUMDOC
3757   32-bit rel. offset from the GOT to a PLT entry.
3758 ENUM
3759   BFD_RELOC_390_PLTOFF64
3760 ENUMDOC
3761   64-bit rel. offset from the GOT to a PLT entry.
3762
3763 ENUM
3764   BFD_RELOC_390_TLS_LOAD
3765 ENUMX
3766   BFD_RELOC_390_TLS_GDCALL
3767 ENUMX
3768   BFD_RELOC_390_TLS_LDCALL
3769 ENUMX
3770   BFD_RELOC_390_TLS_GD32
3771 ENUMX
3772   BFD_RELOC_390_TLS_GD64
3773 ENUMX
3774   BFD_RELOC_390_TLS_GOTIE12
3775 ENUMX
3776   BFD_RELOC_390_TLS_GOTIE32
3777 ENUMX
3778   BFD_RELOC_390_TLS_GOTIE64
3779 ENUMX
3780   BFD_RELOC_390_TLS_LDM32
3781 ENUMX
3782   BFD_RELOC_390_TLS_LDM64
3783 ENUMX
3784   BFD_RELOC_390_TLS_IE32
3785 ENUMX
3786   BFD_RELOC_390_TLS_IE64
3787 ENUMX
3788   BFD_RELOC_390_TLS_IEENT
3789 ENUMX
3790   BFD_RELOC_390_TLS_LE32
3791 ENUMX
3792   BFD_RELOC_390_TLS_LE64
3793 ENUMX
3794   BFD_RELOC_390_TLS_LDO32
3795 ENUMX
3796   BFD_RELOC_390_TLS_LDO64
3797 ENUMX
3798   BFD_RELOC_390_TLS_DTPMOD
3799 ENUMX
3800   BFD_RELOC_390_TLS_DTPOFF
3801 ENUMX
3802   BFD_RELOC_390_TLS_TPOFF
3803 ENUMDOC
3804   s390 tls relocations.
3805
3806 ENUM
3807   BFD_RELOC_390_20
3808 ENUMX
3809   BFD_RELOC_390_GOT20
3810 ENUMX
3811   BFD_RELOC_390_GOTPLT20
3812 ENUMX
3813   BFD_RELOC_390_TLS_GOTIE20
3814 ENUMDOC
3815   Long displacement extension.
3816
3817 ENUM
3818   BFD_RELOC_IP2K_FR9
3819 ENUMDOC
3820   Scenix IP2K - 9-bit register number / data address
3821 ENUM
3822   BFD_RELOC_IP2K_BANK
3823 ENUMDOC
3824   Scenix IP2K - 4-bit register/data bank number
3825 ENUM
3826   BFD_RELOC_IP2K_ADDR16CJP
3827 ENUMDOC
3828   Scenix IP2K - low 13 bits of instruction word address
3829 ENUM
3830   BFD_RELOC_IP2K_PAGE3
3831 ENUMDOC
3832   Scenix IP2K - high 3 bits of instruction word address
3833 ENUM
3834   BFD_RELOC_IP2K_LO8DATA
3835 ENUMX
3836   BFD_RELOC_IP2K_HI8DATA
3837 ENUMX
3838   BFD_RELOC_IP2K_EX8DATA
3839 ENUMDOC
3840   Scenix IP2K - ext/low/high 8 bits of data address
3841 ENUM
3842   BFD_RELOC_IP2K_LO8INSN
3843 ENUMX
3844   BFD_RELOC_IP2K_HI8INSN
3845 ENUMDOC
3846   Scenix IP2K - low/high 8 bits of instruction word address
3847 ENUM
3848   BFD_RELOC_IP2K_PC_SKIP
3849 ENUMDOC
3850   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
3851 ENUM
3852   BFD_RELOC_IP2K_TEXT
3853 ENUMDOC
3854   Scenix IP2K - 16 bit word address in text section.
3855 ENUM
3856   BFD_RELOC_IP2K_FR_OFFSET
3857 ENUMDOC
3858   Scenix IP2K - 7-bit sp or dp offset
3859 ENUM
3860   BFD_RELOC_VPE4KMATH_DATA
3861 ENUMX
3862   BFD_RELOC_VPE4KMATH_INSN
3863 ENUMDOC
3864   Scenix VPE4K coprocessor - data/insn-space addressing
3865
3866 ENUM
3867   BFD_RELOC_VTABLE_INHERIT
3868 ENUMX
3869   BFD_RELOC_VTABLE_ENTRY
3870 ENUMDOC
3871   These two relocations are used by the linker to determine which of
3872   the entries in a C++ virtual function table are actually used.  When
3873   the --gc-sections option is given, the linker will zero out the entries
3874   that are not used, so that the code for those functions need not be
3875   included in the output.
3876
3877   VTABLE_INHERIT is a zero-space relocation used to describe to the
3878   linker the inheritance tree of a C++ virtual function table.  The
3879   relocation's symbol should be the parent class' vtable, and the
3880   relocation should be located at the child vtable.
3881
3882   VTABLE_ENTRY is a zero-space relocation that describes the use of a
3883   virtual function table entry.  The reloc's symbol should refer to the
3884   table of the class mentioned in the code.  Off of that base, an offset
3885   describes the entry that is being used.  For Rela hosts, this offset
3886   is stored in the reloc's addend.  For Rel hosts, we are forced to put
3887   this offset in the reloc's section offset.
3888
3889 ENUM
3890   BFD_RELOC_IA64_IMM14
3891 ENUMX
3892   BFD_RELOC_IA64_IMM22
3893 ENUMX
3894   BFD_RELOC_IA64_IMM64
3895 ENUMX
3896   BFD_RELOC_IA64_DIR32MSB
3897 ENUMX
3898   BFD_RELOC_IA64_DIR32LSB
3899 ENUMX
3900   BFD_RELOC_IA64_DIR64MSB
3901 ENUMX
3902   BFD_RELOC_IA64_DIR64LSB
3903 ENUMX
3904   BFD_RELOC_IA64_GPREL22
3905 ENUMX
3906   BFD_RELOC_IA64_GPREL64I
3907 ENUMX
3908   BFD_RELOC_IA64_GPREL32MSB
3909 ENUMX
3910   BFD_RELOC_IA64_GPREL32LSB
3911 ENUMX
3912   BFD_RELOC_IA64_GPREL64MSB
3913 ENUMX
3914   BFD_RELOC_IA64_GPREL64LSB
3915 ENUMX
3916   BFD_RELOC_IA64_LTOFF22
3917 ENUMX
3918   BFD_RELOC_IA64_LTOFF64I
3919 ENUMX
3920   BFD_RELOC_IA64_PLTOFF22
3921 ENUMX
3922   BFD_RELOC_IA64_PLTOFF64I
3923 ENUMX
3924   BFD_RELOC_IA64_PLTOFF64MSB
3925 ENUMX
3926   BFD_RELOC_IA64_PLTOFF64LSB
3927 ENUMX
3928   BFD_RELOC_IA64_FPTR64I
3929 ENUMX
3930   BFD_RELOC_IA64_FPTR32MSB
3931 ENUMX
3932   BFD_RELOC_IA64_FPTR32LSB
3933 ENUMX
3934   BFD_RELOC_IA64_FPTR64MSB
3935 ENUMX
3936   BFD_RELOC_IA64_FPTR64LSB
3937 ENUMX
3938   BFD_RELOC_IA64_PCREL21B
3939 ENUMX
3940   BFD_RELOC_IA64_PCREL21BI
3941 ENUMX
3942   BFD_RELOC_IA64_PCREL21M
3943 ENUMX
3944   BFD_RELOC_IA64_PCREL21F
3945 ENUMX
3946   BFD_RELOC_IA64_PCREL22
3947 ENUMX
3948   BFD_RELOC_IA64_PCREL60B
3949 ENUMX
3950   BFD_RELOC_IA64_PCREL64I
3951 ENUMX
3952   BFD_RELOC_IA64_PCREL32MSB
3953 ENUMX
3954   BFD_RELOC_IA64_PCREL32LSB
3955 ENUMX
3956   BFD_RELOC_IA64_PCREL64MSB
3957 ENUMX
3958   BFD_RELOC_IA64_PCREL64LSB
3959 ENUMX
3960   BFD_RELOC_IA64_LTOFF_FPTR22
3961 ENUMX
3962   BFD_RELOC_IA64_LTOFF_FPTR64I
3963 ENUMX
3964   BFD_RELOC_IA64_LTOFF_FPTR32MSB
3965 ENUMX
3966   BFD_RELOC_IA64_LTOFF_FPTR32LSB
3967 ENUMX
3968   BFD_RELOC_IA64_LTOFF_FPTR64MSB
3969 ENUMX
3970   BFD_RELOC_IA64_LTOFF_FPTR64LSB
3971 ENUMX
3972   BFD_RELOC_IA64_SEGREL32MSB
3973 ENUMX
3974   BFD_RELOC_IA64_SEGREL32LSB
3975 ENUMX
3976   BFD_RELOC_IA64_SEGREL64MSB
3977 ENUMX
3978   BFD_RELOC_IA64_SEGREL64LSB
3979 ENUMX
3980   BFD_RELOC_IA64_SECREL32MSB
3981 ENUMX
3982   BFD_RELOC_IA64_SECREL32LSB
3983 ENUMX
3984   BFD_RELOC_IA64_SECREL64MSB
3985 ENUMX
3986   BFD_RELOC_IA64_SECREL64LSB
3987 ENUMX
3988   BFD_RELOC_IA64_REL32MSB
3989 ENUMX
3990   BFD_RELOC_IA64_REL32LSB
3991 ENUMX
3992   BFD_RELOC_IA64_REL64MSB
3993 ENUMX
3994   BFD_RELOC_IA64_REL64LSB
3995 ENUMX
3996   BFD_RELOC_IA64_LTV32MSB
3997 ENUMX
3998   BFD_RELOC_IA64_LTV32LSB
3999 ENUMX
4000   BFD_RELOC_IA64_LTV64MSB
4001 ENUMX
4002   BFD_RELOC_IA64_LTV64LSB
4003 ENUMX
4004   BFD_RELOC_IA64_IPLTMSB
4005 ENUMX
4006   BFD_RELOC_IA64_IPLTLSB
4007 ENUMX
4008   BFD_RELOC_IA64_COPY
4009 ENUMX
4010   BFD_RELOC_IA64_LTOFF22X
4011 ENUMX
4012   BFD_RELOC_IA64_LDXMOV
4013 ENUMX
4014   BFD_RELOC_IA64_TPREL14
4015 ENUMX
4016   BFD_RELOC_IA64_TPREL22
4017 ENUMX
4018   BFD_RELOC_IA64_TPREL64I
4019 ENUMX
4020   BFD_RELOC_IA64_TPREL64MSB
4021 ENUMX
4022   BFD_RELOC_IA64_TPREL64LSB
4023 ENUMX
4024   BFD_RELOC_IA64_LTOFF_TPREL22
4025 ENUMX
4026   BFD_RELOC_IA64_DTPMOD64MSB
4027 ENUMX
4028   BFD_RELOC_IA64_DTPMOD64LSB
4029 ENUMX
4030   BFD_RELOC_IA64_LTOFF_DTPMOD22
4031 ENUMX
4032   BFD_RELOC_IA64_DTPREL14
4033 ENUMX
4034   BFD_RELOC_IA64_DTPREL22
4035 ENUMX
4036   BFD_RELOC_IA64_DTPREL64I
4037 ENUMX
4038   BFD_RELOC_IA64_DTPREL32MSB
4039 ENUMX
4040   BFD_RELOC_IA64_DTPREL32LSB
4041 ENUMX
4042   BFD_RELOC_IA64_DTPREL64MSB
4043 ENUMX
4044   BFD_RELOC_IA64_DTPREL64LSB
4045 ENUMX
4046   BFD_RELOC_IA64_LTOFF_DTPREL22
4047 ENUMDOC
4048   Intel IA64 Relocations.
4049
4050 ENUM
4051   BFD_RELOC_M68HC11_HI8
4052 ENUMDOC
4053   Motorola 68HC11 reloc.
4054   This is the 8 bit high part of an absolute address.
4055 ENUM
4056   BFD_RELOC_M68HC11_LO8
4057 ENUMDOC
4058   Motorola 68HC11 reloc.
4059   This is the 8 bit low part of an absolute address.
4060 ENUM
4061   BFD_RELOC_M68HC11_3B
4062 ENUMDOC
4063   Motorola 68HC11 reloc.
4064   This is the 3 bit of a value.
4065 ENUM
4066   BFD_RELOC_M68HC11_RL_JUMP
4067 ENUMDOC
4068   Motorola 68HC11 reloc.
4069   This reloc marks the beginning of a jump/call instruction.
4070   It is used for linker relaxation to correctly identify beginning
4071   of instruction and change some branches to use PC-relative
4072   addressing mode.
4073 ENUM
4074   BFD_RELOC_M68HC11_RL_GROUP
4075 ENUMDOC
4076   Motorola 68HC11 reloc.
4077   This reloc marks a group of several instructions that gcc generates
4078   and for which the linker relaxation pass can modify and/or remove
4079   some of them.
4080 ENUM
4081   BFD_RELOC_M68HC11_LO16
4082 ENUMDOC
4083   Motorola 68HC11 reloc.
4084   This is the 16-bit lower part of an address.  It is used for 'call'
4085   instruction to specify the symbol address without any special
4086   transformation (due to memory bank window).
4087 ENUM
4088   BFD_RELOC_M68HC11_PAGE
4089 ENUMDOC
4090   Motorola 68HC11 reloc.
4091   This is a 8-bit reloc that specifies the page number of an address.
4092   It is used by 'call' instruction to specify the page number of
4093   the symbol.
4094 ENUM
4095   BFD_RELOC_M68HC11_24
4096 ENUMDOC
4097   Motorola 68HC11 reloc.
4098   This is a 24-bit reloc that represents the address with a 16-bit
4099   value and a 8-bit page number.  The symbol address is transformed
4100   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
4101 ENUM
4102   BFD_RELOC_M68HC12_5B
4103 ENUMDOC
4104   Motorola 68HC12 reloc.
4105   This is the 5 bits of a value.
4106
4107 ENUM
4108   BFD_RELOC_16C_NUM08
4109 ENUMX
4110   BFD_RELOC_16C_NUM08_C
4111 ENUMX
4112   BFD_RELOC_16C_NUM16
4113 ENUMX
4114   BFD_RELOC_16C_NUM16_C
4115 ENUMX
4116   BFD_RELOC_16C_NUM32
4117 ENUMX
4118   BFD_RELOC_16C_NUM32_C
4119 ENUMX
4120   BFD_RELOC_16C_DISP04
4121 ENUMX
4122   BFD_RELOC_16C_DISP04_C
4123 ENUMX
4124   BFD_RELOC_16C_DISP08
4125 ENUMX
4126   BFD_RELOC_16C_DISP08_C
4127 ENUMX
4128   BFD_RELOC_16C_DISP16
4129 ENUMX
4130   BFD_RELOC_16C_DISP16_C
4131 ENUMX
4132   BFD_RELOC_16C_DISP24
4133 ENUMX
4134   BFD_RELOC_16C_DISP24_C
4135 ENUMX
4136   BFD_RELOC_16C_DISP24a
4137 ENUMX
4138   BFD_RELOC_16C_DISP24a_C
4139 ENUMX
4140   BFD_RELOC_16C_REG04
4141 ENUMX
4142   BFD_RELOC_16C_REG04_C
4143 ENUMX
4144   BFD_RELOC_16C_REG04a
4145 ENUMX
4146   BFD_RELOC_16C_REG04a_C
4147 ENUMX
4148   BFD_RELOC_16C_REG14
4149 ENUMX
4150   BFD_RELOC_16C_REG14_C
4151 ENUMX
4152   BFD_RELOC_16C_REG16
4153 ENUMX
4154   BFD_RELOC_16C_REG16_C
4155 ENUMX
4156   BFD_RELOC_16C_REG20
4157 ENUMX
4158   BFD_RELOC_16C_REG20_C
4159 ENUMX
4160   BFD_RELOC_16C_ABS20
4161 ENUMX
4162   BFD_RELOC_16C_ABS20_C
4163 ENUMX
4164   BFD_RELOC_16C_ABS24
4165 ENUMX
4166   BFD_RELOC_16C_ABS24_C
4167 ENUMX
4168   BFD_RELOC_16C_IMM04
4169 ENUMX
4170   BFD_RELOC_16C_IMM04_C
4171 ENUMX
4172   BFD_RELOC_16C_IMM16
4173 ENUMX
4174   BFD_RELOC_16C_IMM16_C
4175 ENUMX
4176   BFD_RELOC_16C_IMM20
4177 ENUMX
4178   BFD_RELOC_16C_IMM20_C
4179 ENUMX
4180   BFD_RELOC_16C_IMM24
4181 ENUMX
4182   BFD_RELOC_16C_IMM24_C
4183 ENUMX
4184   BFD_RELOC_16C_IMM32
4185 ENUMX
4186   BFD_RELOC_16C_IMM32_C
4187 ENUMDOC
4188   NS CR16C Relocations.
4189
4190 ENUM
4191   BFD_RELOC_CRX_REL4
4192 ENUMX
4193   BFD_RELOC_CRX_REL8
4194 ENUMX
4195   BFD_RELOC_CRX_REL8_CMP
4196 ENUMX
4197   BFD_RELOC_CRX_REL16
4198 ENUMX
4199   BFD_RELOC_CRX_REL24
4200 ENUMX
4201   BFD_RELOC_CRX_REL32
4202 ENUMX
4203   BFD_RELOC_CRX_REGREL12
4204 ENUMX
4205   BFD_RELOC_CRX_REGREL22
4206 ENUMX
4207   BFD_RELOC_CRX_REGREL28
4208 ENUMX
4209   BFD_RELOC_CRX_REGREL32
4210 ENUMX
4211   BFD_RELOC_CRX_ABS16
4212 ENUMX
4213   BFD_RELOC_CRX_ABS32
4214 ENUMX
4215   BFD_RELOC_CRX_NUM8
4216 ENUMX
4217   BFD_RELOC_CRX_NUM16
4218 ENUMX
4219   BFD_RELOC_CRX_NUM32
4220 ENUMX
4221   BFD_RELOC_CRX_IMM16
4222 ENUMX
4223   BFD_RELOC_CRX_IMM32
4224 ENUMX
4225   BFD_RELOC_CRX_SWITCH8
4226 ENUMX
4227   BFD_RELOC_CRX_SWITCH16
4228 ENUMX
4229   BFD_RELOC_CRX_SWITCH32
4230 ENUMDOC
4231   NS CRX Relocations.
4232
4233 ENUM
4234   BFD_RELOC_CRIS_BDISP8
4235 ENUMX
4236   BFD_RELOC_CRIS_UNSIGNED_5
4237 ENUMX
4238   BFD_RELOC_CRIS_SIGNED_6
4239 ENUMX
4240   BFD_RELOC_CRIS_UNSIGNED_6
4241 ENUMX
4242   BFD_RELOC_CRIS_SIGNED_8
4243 ENUMX
4244   BFD_RELOC_CRIS_UNSIGNED_8
4245 ENUMX
4246   BFD_RELOC_CRIS_SIGNED_16
4247 ENUMX
4248   BFD_RELOC_CRIS_UNSIGNED_16
4249 ENUMX
4250   BFD_RELOC_CRIS_LAPCQ_OFFSET
4251 ENUMX
4252   BFD_RELOC_CRIS_UNSIGNED_4
4253 ENUMDOC
4254   These relocs are only used within the CRIS assembler.  They are not
4255   (at present) written to any object files.
4256 ENUM
4257   BFD_RELOC_CRIS_COPY
4258 ENUMX
4259   BFD_RELOC_CRIS_GLOB_DAT
4260 ENUMX
4261   BFD_RELOC_CRIS_JUMP_SLOT
4262 ENUMX
4263   BFD_RELOC_CRIS_RELATIVE
4264 ENUMDOC
4265   Relocs used in ELF shared libraries for CRIS.
4266 ENUM
4267   BFD_RELOC_CRIS_32_GOT
4268 ENUMDOC
4269   32-bit offset to symbol-entry within GOT.
4270 ENUM
4271   BFD_RELOC_CRIS_16_GOT
4272 ENUMDOC
4273   16-bit offset to symbol-entry within GOT.
4274 ENUM
4275   BFD_RELOC_CRIS_32_GOTPLT
4276 ENUMDOC
4277   32-bit offset to symbol-entry within GOT, with PLT handling.
4278 ENUM
4279   BFD_RELOC_CRIS_16_GOTPLT
4280 ENUMDOC
4281   16-bit offset to symbol-entry within GOT, with PLT handling.
4282 ENUM
4283   BFD_RELOC_CRIS_32_GOTREL
4284 ENUMDOC
4285   32-bit offset to symbol, relative to GOT.
4286 ENUM
4287   BFD_RELOC_CRIS_32_PLT_GOTREL
4288 ENUMDOC
4289   32-bit offset to symbol with PLT entry, relative to GOT.
4290 ENUM
4291   BFD_RELOC_CRIS_32_PLT_PCREL
4292 ENUMDOC
4293   32-bit offset to symbol with PLT entry, relative to this relocation.
4294
4295 ENUM
4296   BFD_RELOC_860_COPY
4297 ENUMX
4298   BFD_RELOC_860_GLOB_DAT
4299 ENUMX
4300   BFD_RELOC_860_JUMP_SLOT
4301 ENUMX
4302   BFD_RELOC_860_RELATIVE
4303 ENUMX
4304   BFD_RELOC_860_PC26
4305 ENUMX
4306   BFD_RELOC_860_PLT26
4307 ENUMX
4308   BFD_RELOC_860_PC16
4309 ENUMX
4310   BFD_RELOC_860_LOW0
4311 ENUMX
4312   BFD_RELOC_860_SPLIT0
4313 ENUMX
4314   BFD_RELOC_860_LOW1
4315 ENUMX
4316   BFD_RELOC_860_SPLIT1
4317 ENUMX
4318   BFD_RELOC_860_LOW2
4319 ENUMX
4320   BFD_RELOC_860_SPLIT2
4321 ENUMX
4322   BFD_RELOC_860_LOW3
4323 ENUMX
4324   BFD_RELOC_860_LOGOT0
4325 ENUMX
4326   BFD_RELOC_860_SPGOT0
4327 ENUMX
4328   BFD_RELOC_860_LOGOT1
4329 ENUMX
4330   BFD_RELOC_860_SPGOT1
4331 ENUMX
4332   BFD_RELOC_860_LOGOTOFF0
4333 ENUMX
4334   BFD_RELOC_860_SPGOTOFF0
4335 ENUMX
4336   BFD_RELOC_860_LOGOTOFF1
4337 ENUMX
4338   BFD_RELOC_860_SPGOTOFF1
4339 ENUMX
4340   BFD_RELOC_860_LOGOTOFF2
4341 ENUMX
4342   BFD_RELOC_860_LOGOTOFF3
4343 ENUMX
4344   BFD_RELOC_860_LOPC
4345 ENUMX
4346   BFD_RELOC_860_HIGHADJ
4347 ENUMX
4348   BFD_RELOC_860_HAGOT
4349 ENUMX
4350   BFD_RELOC_860_HAGOTOFF
4351 ENUMX
4352   BFD_RELOC_860_HAPC
4353 ENUMX
4354   BFD_RELOC_860_HIGH
4355 ENUMX
4356   BFD_RELOC_860_HIGOT
4357 ENUMX
4358   BFD_RELOC_860_HIGOTOFF
4359 ENUMDOC
4360   Intel i860 Relocations.
4361
4362 ENUM
4363   BFD_RELOC_OPENRISC_ABS_26
4364 ENUMX
4365   BFD_RELOC_OPENRISC_REL_26
4366 ENUMDOC
4367   OpenRISC Relocations.
4368
4369 ENUM
4370   BFD_RELOC_H8_DIR16A8
4371 ENUMX
4372   BFD_RELOC_H8_DIR16R8
4373 ENUMX
4374   BFD_RELOC_H8_DIR24A8
4375 ENUMX
4376   BFD_RELOC_H8_DIR24R8
4377 ENUMX
4378   BFD_RELOC_H8_DIR32A16
4379 ENUMDOC
4380   H8 elf Relocations.
4381
4382 ENUM
4383   BFD_RELOC_XSTORMY16_REL_12
4384 ENUMX
4385   BFD_RELOC_XSTORMY16_12
4386 ENUMX
4387   BFD_RELOC_XSTORMY16_24
4388 ENUMX
4389   BFD_RELOC_XSTORMY16_FPTR16
4390 ENUMDOC
4391   Sony Xstormy16 Relocations.
4392
4393 ENUM
4394   BFD_RELOC_XC16X_PAG
4395 ENUMX
4396   BFD_RELOC_XC16X_POF
4397 ENUMX
4398   BFD_RELOC_XC16X_SEG
4399 ENUMX
4400   BFD_RELOC_XC16X_SOF
4401 ENUMDOC
4402   Infineon Relocations.
4403
4404 ENUM
4405   BFD_RELOC_VAX_GLOB_DAT
4406 ENUMX
4407   BFD_RELOC_VAX_JMP_SLOT
4408 ENUMX
4409   BFD_RELOC_VAX_RELATIVE
4410 ENUMDOC
4411   Relocations used by VAX ELF.
4412
4413 ENUM
4414   BFD_RELOC_MT_PC16
4415 ENUMDOC
4416   Morpho MT - 16 bit immediate relocation.
4417 ENUM
4418   BFD_RELOC_MT_HI16
4419 ENUMDOC
4420   Morpho MT - Hi 16 bits of an address.
4421 ENUM
4422   BFD_RELOC_MT_LO16
4423 ENUMDOC
4424   Morpho MT - Low 16 bits of an address.
4425 ENUM
4426   BFD_RELOC_MT_GNU_VTINHERIT
4427 ENUMDOC
4428   Morpho MT - Used to tell the linker which vtable entries are used.
4429 ENUM
4430   BFD_RELOC_MT_GNU_VTENTRY
4431 ENUMDOC
4432   Morpho MT - Used to tell the linker which vtable entries are used.
4433 ENUM
4434   BFD_RELOC_MT_PCINSN8
4435 ENUMDOC
4436   Morpho MT - 8 bit immediate relocation.
4437
4438 ENUM
4439   BFD_RELOC_MSP430_10_PCREL
4440 ENUMX
4441   BFD_RELOC_MSP430_16_PCREL
4442 ENUMX
4443   BFD_RELOC_MSP430_16
4444 ENUMX
4445   BFD_RELOC_MSP430_16_PCREL_BYTE
4446 ENUMX
4447   BFD_RELOC_MSP430_16_BYTE
4448 ENUMX
4449   BFD_RELOC_MSP430_2X_PCREL
4450 ENUMX
4451   BFD_RELOC_MSP430_RL_PCREL
4452 ENUMDOC
4453   msp430 specific relocation codes
4454
4455 ENUM
4456   BFD_RELOC_IQ2000_OFFSET_16
4457 ENUMX
4458   BFD_RELOC_IQ2000_OFFSET_21
4459 ENUMX
4460   BFD_RELOC_IQ2000_UHI16
4461 ENUMDOC
4462   IQ2000 Relocations.
4463
4464 ENUM
4465   BFD_RELOC_XTENSA_RTLD
4466 ENUMDOC
4467   Special Xtensa relocation used only by PLT entries in ELF shared
4468   objects to indicate that the runtime linker should set the value
4469   to one of its own internal functions or data structures.
4470 ENUM
4471   BFD_RELOC_XTENSA_GLOB_DAT
4472 ENUMX
4473   BFD_RELOC_XTENSA_JMP_SLOT
4474 ENUMX
4475   BFD_RELOC_XTENSA_RELATIVE
4476 ENUMDOC
4477   Xtensa relocations for ELF shared objects.
4478 ENUM
4479   BFD_RELOC_XTENSA_PLT
4480 ENUMDOC
4481   Xtensa relocation used in ELF object files for symbols that may require
4482   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
4483 ENUM
4484   BFD_RELOC_XTENSA_DIFF8
4485 ENUMX
4486   BFD_RELOC_XTENSA_DIFF16
4487 ENUMX
4488   BFD_RELOC_XTENSA_DIFF32
4489 ENUMDOC
4490   Xtensa relocations to mark the difference of two local symbols.
4491   These are only needed to support linker relaxation and can be ignored
4492   when not relaxing.  The field is set to the value of the difference
4493   assuming no relaxation.  The relocation encodes the position of the
4494   first symbol so the linker can determine whether to adjust the field
4495   value.
4496 ENUM
4497   BFD_RELOC_XTENSA_SLOT0_OP
4498 ENUMX
4499   BFD_RELOC_XTENSA_SLOT1_OP
4500 ENUMX
4501   BFD_RELOC_XTENSA_SLOT2_OP
4502 ENUMX
4503   BFD_RELOC_XTENSA_SLOT3_OP
4504 ENUMX
4505   BFD_RELOC_XTENSA_SLOT4_OP
4506 ENUMX
4507   BFD_RELOC_XTENSA_SLOT5_OP
4508 ENUMX
4509   BFD_RELOC_XTENSA_SLOT6_OP
4510 ENUMX
4511   BFD_RELOC_XTENSA_SLOT7_OP
4512 ENUMX
4513   BFD_RELOC_XTENSA_SLOT8_OP
4514 ENUMX
4515   BFD_RELOC_XTENSA_SLOT9_OP
4516 ENUMX
4517   BFD_RELOC_XTENSA_SLOT10_OP
4518 ENUMX
4519   BFD_RELOC_XTENSA_SLOT11_OP
4520 ENUMX
4521   BFD_RELOC_XTENSA_SLOT12_OP
4522 ENUMX
4523   BFD_RELOC_XTENSA_SLOT13_OP
4524 ENUMX
4525   BFD_RELOC_XTENSA_SLOT14_OP
4526 ENUMDOC
4527   Generic Xtensa relocations for instruction operands.  Only the slot
4528   number is encoded in the relocation.  The relocation applies to the
4529   last PC-relative immediate operand, or if there are no PC-relative
4530   immediates, to the last immediate operand.
4531 ENUM
4532   BFD_RELOC_XTENSA_SLOT0_ALT
4533 ENUMX
4534   BFD_RELOC_XTENSA_SLOT1_ALT
4535 ENUMX
4536   BFD_RELOC_XTENSA_SLOT2_ALT
4537 ENUMX
4538   BFD_RELOC_XTENSA_SLOT3_ALT
4539 ENUMX
4540   BFD_RELOC_XTENSA_SLOT4_ALT
4541 ENUMX
4542   BFD_RELOC_XTENSA_SLOT5_ALT
4543 ENUMX
4544   BFD_RELOC_XTENSA_SLOT6_ALT
4545 ENUMX
4546   BFD_RELOC_XTENSA_SLOT7_ALT
4547 ENUMX
4548   BFD_RELOC_XTENSA_SLOT8_ALT
4549 ENUMX
4550   BFD_RELOC_XTENSA_SLOT9_ALT
4551 ENUMX
4552   BFD_RELOC_XTENSA_SLOT10_ALT
4553 ENUMX
4554   BFD_RELOC_XTENSA_SLOT11_ALT
4555 ENUMX
4556   BFD_RELOC_XTENSA_SLOT12_ALT
4557 ENUMX
4558   BFD_RELOC_XTENSA_SLOT13_ALT
4559 ENUMX
4560   BFD_RELOC_XTENSA_SLOT14_ALT
4561 ENUMDOC
4562   Alternate Xtensa relocations.  Only the slot is encoded in the
4563   relocation.  The meaning of these relocations is opcode-specific.
4564 ENUM
4565   BFD_RELOC_XTENSA_OP0
4566 ENUMX
4567   BFD_RELOC_XTENSA_OP1
4568 ENUMX
4569   BFD_RELOC_XTENSA_OP2
4570 ENUMDOC
4571   Xtensa relocations for backward compatibility.  These have all been
4572   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
4573 ENUM
4574   BFD_RELOC_XTENSA_ASM_EXPAND
4575 ENUMDOC
4576   Xtensa relocation to mark that the assembler expanded the
4577   instructions from an original target.  The expansion size is
4578   encoded in the reloc size.
4579 ENUM
4580   BFD_RELOC_XTENSA_ASM_SIMPLIFY
4581 ENUMDOC
4582   Xtensa relocation to mark that the linker should simplify
4583   assembler-expanded instructions.  This is commonly used
4584   internally by the linker after analysis of a
4585   BFD_RELOC_XTENSA_ASM_EXPAND.
4586
4587 ENUM
4588   BFD_RELOC_Z80_DISP8
4589 ENUMDOC
4590   8 bit signed offset in (ix+d) or (iy+d).
4591
4592 ENUM
4593   BFD_RELOC_Z8K_DISP7
4594 ENUMDOC
4595   DJNZ offset.
4596 ENUM
4597   BFD_RELOC_Z8K_CALLR
4598 ENUMDOC
4599   CALR offset.
4600 ENUM
4601   BFD_RELOC_Z8K_IMM4L
4602 ENUMDOC
4603   4 bit value.
4604
4605 ENDSENUM
4606   BFD_RELOC_UNUSED
4607 CODE_FRAGMENT
4608 .
4609 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
4610 */
4611
4612 /*
4613 FUNCTION
4614         bfd_reloc_type_lookup
4615
4616 SYNOPSIS
4617         reloc_howto_type *bfd_reloc_type_lookup
4618           (bfd *abfd, bfd_reloc_code_real_type code);
4619
4620 DESCRIPTION
4621         Return a pointer to a howto structure which, when
4622         invoked, will perform the relocation @var{code} on data from the
4623         architecture noted.
4624
4625 */
4626
4627 reloc_howto_type *
4628 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
4629 {
4630   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
4631 }
4632
4633 static reloc_howto_type bfd_howto_32 =
4634 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
4635
4636 /*
4637 INTERNAL_FUNCTION
4638         bfd_default_reloc_type_lookup
4639
4640 SYNOPSIS
4641         reloc_howto_type *bfd_default_reloc_type_lookup
4642           (bfd *abfd, bfd_reloc_code_real_type  code);
4643
4644 DESCRIPTION
4645         Provides a default relocation lookup routine for any architecture.
4646
4647 */
4648
4649 reloc_howto_type *
4650 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
4651 {
4652   switch (code)
4653     {
4654     case BFD_RELOC_CTOR:
4655       /* The type of reloc used in a ctor, which will be as wide as the
4656          address - so either a 64, 32, or 16 bitter.  */
4657       switch (bfd_get_arch_info (abfd)->bits_per_address)
4658         {
4659         case 64:
4660           BFD_FAIL ();
4661         case 32:
4662           return &bfd_howto_32;
4663         case 16:
4664           BFD_FAIL ();
4665         default:
4666           BFD_FAIL ();
4667         }
4668     default:
4669       BFD_FAIL ();
4670     }
4671   return NULL;
4672 }
4673
4674 /*
4675 FUNCTION
4676         bfd_get_reloc_code_name
4677
4678 SYNOPSIS
4679         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
4680
4681 DESCRIPTION
4682         Provides a printable name for the supplied relocation code.
4683         Useful mainly for printing error messages.
4684 */
4685
4686 const char *
4687 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
4688 {
4689   if (code > BFD_RELOC_UNUSED)
4690     return 0;
4691   return bfd_reloc_code_real_names[code];
4692 }
4693
4694 /*
4695 INTERNAL_FUNCTION
4696         bfd_generic_relax_section
4697
4698 SYNOPSIS
4699         bfd_boolean bfd_generic_relax_section
4700           (bfd *abfd,
4701            asection *section,
4702            struct bfd_link_info *,
4703            bfd_boolean *);
4704
4705 DESCRIPTION
4706         Provides default handling for relaxing for back ends which
4707         don't do relaxing.
4708 */
4709
4710 bfd_boolean
4711 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
4712                            asection *section ATTRIBUTE_UNUSED,
4713                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
4714                            bfd_boolean *again)
4715 {
4716   *again = FALSE;
4717   return TRUE;
4718 }
4719
4720 /*
4721 INTERNAL_FUNCTION
4722         bfd_generic_gc_sections
4723
4724 SYNOPSIS
4725         bfd_boolean bfd_generic_gc_sections
4726           (bfd *, struct bfd_link_info *);
4727
4728 DESCRIPTION
4729         Provides default handling for relaxing for back ends which
4730         don't do section gc -- i.e., does nothing.
4731 */
4732
4733 bfd_boolean
4734 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
4735                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
4736 {
4737   return TRUE;
4738 }
4739
4740 /*
4741 INTERNAL_FUNCTION
4742         bfd_generic_merge_sections
4743
4744 SYNOPSIS
4745         bfd_boolean bfd_generic_merge_sections
4746           (bfd *, struct bfd_link_info *);
4747
4748 DESCRIPTION
4749         Provides default handling for SEC_MERGE section merging for back ends
4750         which don't have SEC_MERGE support -- i.e., does nothing.
4751 */
4752
4753 bfd_boolean
4754 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
4755                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
4756 {
4757   return TRUE;
4758 }
4759
4760 /*
4761 INTERNAL_FUNCTION
4762         bfd_generic_get_relocated_section_contents
4763
4764 SYNOPSIS
4765         bfd_byte *bfd_generic_get_relocated_section_contents
4766           (bfd *abfd,
4767            struct bfd_link_info *link_info,
4768            struct bfd_link_order *link_order,
4769            bfd_byte *data,
4770            bfd_boolean relocatable,
4771            asymbol **symbols);
4772
4773 DESCRIPTION
4774         Provides default handling of relocation effort for back ends
4775         which can't be bothered to do it efficiently.
4776
4777 */
4778
4779 bfd_byte *
4780 bfd_generic_get_relocated_section_contents (bfd *abfd,
4781                                             struct bfd_link_info *link_info,
4782                                             struct bfd_link_order *link_order,
4783                                             bfd_byte *data,
4784                                             bfd_boolean relocatable,
4785                                             asymbol **symbols)
4786 {
4787   /* Get enough memory to hold the stuff.  */
4788   bfd *input_bfd = link_order->u.indirect.section->owner;
4789   asection *input_section = link_order->u.indirect.section;
4790
4791   long reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
4792   arelent **reloc_vector = NULL;
4793   long reloc_count;
4794   bfd_size_type sz;
4795
4796   if (reloc_size < 0)
4797     goto error_return;
4798
4799   reloc_vector = bfd_malloc (reloc_size);
4800   if (reloc_vector == NULL && reloc_size != 0)
4801     goto error_return;
4802
4803   /* Read in the section.  */
4804   sz = input_section->rawsize ? input_section->rawsize : input_section->size;
4805   if (!bfd_get_section_contents (input_bfd, input_section, data, 0, sz))
4806     goto error_return;
4807
4808   reloc_count = bfd_canonicalize_reloc (input_bfd,
4809                                         input_section,
4810                                         reloc_vector,
4811                                         symbols);
4812   if (reloc_count < 0)
4813     goto error_return;
4814
4815   if (reloc_count > 0)
4816     {
4817       arelent **parent;
4818       for (parent = reloc_vector; *parent != NULL; parent++)
4819         {
4820           char *error_message = NULL;
4821           bfd_reloc_status_type r =
4822             bfd_perform_relocation (input_bfd,
4823                                     *parent,
4824                                     data,
4825                                     input_section,
4826                                     relocatable ? abfd : NULL,
4827                                     &error_message);
4828
4829           if (relocatable)
4830             {
4831               asection *os = input_section->output_section;
4832
4833               /* A partial link, so keep the relocs.  */
4834               os->orelocation[os->reloc_count] = *parent;
4835               os->reloc_count++;
4836             }
4837
4838           if (r != bfd_reloc_ok)
4839             {
4840               switch (r)
4841                 {
4842                 case bfd_reloc_undefined:
4843                   if (!((*link_info->callbacks->undefined_symbol)
4844                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
4845                          input_bfd, input_section, (*parent)->address,
4846                          TRUE)))
4847                     goto error_return;
4848                   break;
4849                 case bfd_reloc_dangerous:
4850                   BFD_ASSERT (error_message != NULL);
4851                   if (!((*link_info->callbacks->reloc_dangerous)
4852                         (link_info, error_message, input_bfd, input_section,
4853                          (*parent)->address)))
4854                     goto error_return;
4855                   break;
4856                 case bfd_reloc_overflow:
4857                   if (!((*link_info->callbacks->reloc_overflow)
4858                         (link_info, NULL,
4859                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
4860                          (*parent)->howto->name, (*parent)->addend,
4861                          input_bfd, input_section, (*parent)->address)))
4862                     goto error_return;
4863                   break;
4864                 case bfd_reloc_outofrange:
4865                 default:
4866                   abort ();
4867                   break;
4868                 }
4869
4870             }
4871         }
4872     }
4873   if (reloc_vector != NULL)
4874     free (reloc_vector);
4875   return data;
4876
4877 error_return:
4878   if (reloc_vector != NULL)
4879     free (reloc_vector);
4880   return NULL;
4881 }