include/coff/ti.h

   1 /* COFF information for TI COFF support.  Definitions in this file should be
   2    customized in a target-specific file, and then this file included (see
   3    tic54x.h for an example). */
   4 #ifndef COFF_TI_H
   5 #define COFF_TI_H
   6
   7 /********************** FILE HEADER **********************/
   8
   9 struct external_filehdr {
  10         char f_magic[2];        /* magic number                 */
  11         char f_nscns[2];        /* number of sections           */
  12         char f_timdat[4];       /* time & date stamp            */
  13         char f_symptr[4];       /* file pointer to symtab       */
  14         char f_nsyms[4];        /* number of symtab entries     */
  15         char f_opthdr[2];       /* sizeof(optional hdr)         */
  16         char f_flags[2];        /* flags                        */
  17         char f_target_id[2];    /* magic no. (TI COFF-specific) */
  18 };
  19
  20 /* COFF0 has magic number in f_magic, and omits f_target_id from the file
  21    header; for later versions, f_magic is 0xC1 for COFF1 and 0xC2 for COFF2
  22    and the target-specific magic number is found in f_target_id */
  23
  24 #define TICOFF0MAGIC    TI_TARGET_ID
  25 #define TICOFF1MAGIC    0x00C1
  26 #define TICOFF2MAGIC    0x00C2
  27 #define TICOFF_AOUT_MAGIC    0x0108 /* magic number in optional header */
  28 #define TICOFF          1 /* customize coffcode.h */
  29
  30 /* The target_id field changes depending on the particular CPU target */
  31 /* for COFF0, the target id appeared in f_magic, where COFFX magic is now */
  32 #ifndef TI_TARGET_ID
  33 #error "TI_TARGET_ID needs to be defined for your CPU"
  34 #endif
  35
  36 /* Which bfd_arch to use... */
  37 #ifndef TICOFF_TARGET_ARCH
  38 #error "TICOFF_TARGET_ARCH needs to be defined for your CPU"
  39 #endif
  40
  41 /* Default to COFF2 for file output */
  42 #ifndef TICOFF_DEFAULT_MAGIC
  43 #define TICOFF_DEFAULT_MAGIC TICOFF2MAGIC
  44 #endif
  45
  46 /* This value is made available in the rare case where a bfd is unavailable */
  47 #ifndef OCTETS_PER_BYTE_POWER
  48 #error "OCTETS_PER_BYTE_POWER not defined for this CPU"
  49 #else
  50 #define OCTETS_PER_BYTE (1<<OCTETS_PER_BYTE_POWER)
  51 #endif
  52
  53 /* default alignment is on a byte (not octet!) boundary */
  54 #ifndef COFF_DEFAULT_SECTION_ALIGNMENT_POWER
  55 #define COFF_DEFAULT_SECTION_ALIGNMENT_POWER 0
  56 #endif
  57
  58 /* TI COFF encodes the section alignment in the section header flags */
  59 #define COFF_ALIGN_IN_SECTION_HEADER 1
  60 #define COFF_ALIGN_IN_S_FLAGS 1
  61 /* requires a power-of-two argument */
  62 #define COFF_ENCODE_ALIGNMENT(S,X) ((S).s_flags |= (((unsigned)(X)&0xF)<<8))
  63 /* result is a power of two */
  64 #define COFF_DECODE_ALIGNMENT(X) (((X)>>8)&0xF)
  65
  66 #define COFF0_P(ABFD) (bfd_coff_filhsz(ABFD) == FILHSZ_V0)
  67 #define COFF2_P(ABFD) (bfd_coff_scnhsz(ABFD) != SCNHSZ_V01)
  68
  69 #define COFF0_BADMAG(x) ((x).f_magic != TICOFF0MAGIC)
  70 #define COFF1_BADMAG(x) ((x).f_magic != TICOFF1MAGIC || (x).f_target_id != TI_TARGET_ID)
  71 #define COFF2_BADMAG(x) ((x).f_magic != TICOFF2MAGIC || (x).f_target_id != TI_TARGET_ID)
  72
  73 /* we need to read/write an extra field in the coff file header */
  74 #ifndef COFF_ADJUST_FILEHDR_IN_POST
  75 #define COFF_ADJUST_FILEHDR_IN_POST(abfd,src,dst) \
  76 do { ((struct internal_filehdr *)(dst))->f_target_id = \
  77 bfd_h_get_16(abfd, (bfd_byte *)(((FILHDR *)(src))->f_target_id)); \
  78 } while(0)
  79 #endif
  80
  81 #ifndef COFF_ADJUST_FILEHDR_OUT_POST
  82 #define COFF_ADJUST_FILEHDR_OUT_POST(abfd,src,dst) \
  83 do { bfd_h_put_16(abfd, ((struct internal_filehdr *)(src))->f_target_id, \
  84              (bfd_byte *)(((FILHDR *)(dst))->f_target_id)); \
  85 } while(0)
  86 #endif
  87
  88 #define FILHDR  struct external_filehdr
  89 #define FILHSZ  22
  90 #define FILHSZ_V0 20                /* COFF0 omits target_id field */
  91
  92 /* File header flags */
  93 #define F_RELFLG        (0x0001)
  94 #define F_EXEC          (0x0002)
  95 #define F_LNNO          (0x0004)
  96 /* F_LSYMS needs to be redefined in your source file */
  97 #define F_LSYMS_TICOFF  (0x0010) /* normal COFF is 0x8 */
  98
  99 #define F_10            0x00    /* file built for TMS320C1x devices */
 100 #define F_20            0x10    /* file built for TMS320C2x devices */
 101 #define F_25            0x20    /* file built for TMS320C2x/C5x devices */
 102 #define F_LENDIAN       0x0100  /* 16 bits/word, LSB first */
 103 #define F_SYMMERGE      0x1000  /* duplicate symbols were removed */
 104
 105 /********************** OPTIONAL HEADER **********************/
 106
 107
 108 typedef struct
 109 {
 110   char  magic[2];               /* type of file (0x108)                 */
 111   char  vstamp[2];              /* version stamp                        */
 112   char  tsize[4];               /* text size in bytes, padded to FW bdry*/
 113   char  dsize[4];               /* initialized data "  "                */
 114   char  bsize[4];               /* uninitialized data "   "             */
 115   char  entry[4];               /* entry pt.                            */
 116   char  text_start[4];          /* base of text used for this file */
 117   char  data_start[4];          /* base of data used for this file */
 118 }
 119 AOUTHDR;
 120
 121
 122 #define AOUTHDRSZ 28
 123 #define AOUTSZ 28
 124
 125
 126 /********************** SECTION HEADER **********************/
 127 /* COFF0, COFF1 */
 128 struct external_scnhdr_v01 {
 129         char            s_name[8];      /* section name                 */
 130         char            s_paddr[4];     /* physical address, aliased s_nlib */
 131         char            s_vaddr[4];     /* virtual address              */
 132         char            s_size[4];      /* section size (in WORDS)      */
 133         char            s_scnptr[4];    /* file ptr to raw data for section */
 134         char            s_relptr[4];    /* file ptr to relocation       */
 135         char            s_lnnoptr[4];   /* file ptr to line numbers     */
 136         char            s_nreloc[2];    /* number of relocation entries */
 137         char            s_nlnno[2];     /* number of line number entries*/
 138         char            s_flags[2];     /* flags                        */
 139         char            s_reserved[1];  /* reserved                     */
 140         char            s_page[1];      /* section page number (LOAD)   */
 141 };
 142
 143 /* COFF2 */
 144 struct external_scnhdr {
 145         char            s_name[8];      /* section name                 */
 146         char            s_paddr[4];     /* physical address, aliased s_nlib */
 147         char            s_vaddr[4];     /* virtual address              */
 148         char            s_size[4];      /* section size (in WORDS)      */
 149         char            s_scnptr[4];    /* file ptr to raw data for section */
 150         char            s_relptr[4];    /* file ptr to relocation       */
 151         char            s_lnnoptr[4];   /* file ptr to line numbers     */
 152         char            s_nreloc[4];    /* number of relocation entries */
 153         char            s_nlnno[4];     /* number of line number entries*/
 154         char            s_flags[4];     /* flags                        */
 155         char            s_reserved[2];  /* reserved                     */
 156         char            s_page[2];      /* section page number (LOAD)   */
 157 };
 158
 159 /*
 160  * Special section flags
 161  */
 162
 163 /* TI COFF defines these flags;
 164    STYP_CLINK: the section should be excluded from the final
 165    linker output if there are no references found to any symbol in the section
 166    STYP_BLOCK: the section should be blocked, i.e. if the section would cross
 167    a page boundary, it is started at a page boundary instead.
 168    TI COFF puts the section alignment power of two in the section flags
 169    e.g. 2**N is alignment, flags |= (N & 0xF) << 8
 170 */
 171 #define STYP_CLINK      (0x4000)
 172 #define STYP_BLOCK      (0x1000)
 173 #define STYP_ALIGN      (0x0F00) /* TI COFF stores section alignment here */
 174
 175 #define SCNHDR_V01 struct external_scnhdr_v01
 176 #define SCNHDR struct external_scnhdr
 177 #define SCNHSZ_V01 40                  /* for v0 and v1 */
 178 #define SCNHSZ 48
 179
 180 /* COFF2 changes the offsets and sizes of these fields
 181    Assume we're dealing with the COFF2 scnhdr structure, and adjust
 182    accordingly
 183  */
 184 #define GET_SCNHDR_NRELOC(ABFD,PTR) \
 185 (COFF2_P(ABFD) ? bfd_h_get_32 (ABFD,PTR) : bfd_h_get_16 (ABFD, PTR))
 186 #define PUT_SCNHDR_NRELOC(ABFD,VAL,PTR) \
 187 (COFF2_P(ABFD) ? bfd_h_put_32 (ABFD,VAL,PTR) : bfd_h_put_16 (ABFD,VAL,PTR))
 188 #define GET_SCNHDR_NLNNO(ABFD,PTR) \
 189 (COFF2_P(ABFD) ? bfd_h_get_32 (ABFD,PTR) : bfd_h_get_16 (ABFD, (PTR)-2))
 190 #define PUT_SCNHDR_NLNNO(ABFD,VAL,PTR) \
 191 (COFF2_P(ABFD) ? bfd_h_put_32 (ABFD,VAL,PTR) : bfd_h_put_16 (ABFD,VAL,(PTR)-2))
 192 #define GET_SCNHDR_FLAGS(ABFD,PTR) \
 193 (COFF2_P(ABFD) ? bfd_h_get_32 (ABFD,PTR) : bfd_h_get_16 (ABFD, (PTR)-4))
 194 #define PUT_SCNHDR_FLAGS(ABFD,VAL,PTR) \
 195 (COFF2_P(ABFD) ? bfd_h_put_32 (ABFD,VAL,PTR) : bfd_h_put_16 (ABFD,VAL,(PTR)-4))
 196 #define GET_SCNHDR_PAGE(ABFD,PTR) \
 197 (COFF2_P(ABFD) ? bfd_h_get_16 (ABFD,PTR) : bfd_h_get_8 (ABFD, (PTR)-7))
 198 /* on output, make sure that the "reserved" field is zero */
 199 #define PUT_SCNHDR_PAGE(ABFD,VAL,PTR) \
 200 (COFF2_P(ABFD) ? bfd_h_put_16 (ABFD,VAL,PTR) : \
 201 bfd_h_put_8 (ABFD,VAL,(PTR)-7), bfd_h_put_8 (ABFD, 0, (PTR)-8))
 202
 203 /* TI COFF stores section size as number of bytes (address units, not octets),
 204    so adjust to be number of octets, which is what BFD expects */
 205 #define GET_SCNHDR_SIZE(ABFD,SZP) \
 206 (bfd_h_get_32(ABFD,SZP)*bfd_octets_per_byte(ABFD))
 207 #define PUT_SCNHDR_SIZE(ABFD,SZ,SZP) \
 208 bfd_h_put_32(ABFD,(SZ)/bfd_octets_per_byte(ABFD),SZP)
 209
 210 #define COFF_ADJUST_SCNHDR_IN_POST(ABFD,EXT,INT) \
 211 do { ((struct internal_scnhdr *)(INT))->s_page = \
 212 GET_SCNHDR_PAGE(ABFD,(bfd_byte *)((SCNHDR *)(EXT))->s_page); \
 213 } while(0)
 214
 215 /* The line number and reloc overflow checking in coff_swap_scnhdr_out in
 216    coffswap.h doesn't use PUT_X for s_nlnno and s_nreloc.
 217    Due to different sized v0/v1/v2 section headers, we have to re-write these
 218    fields.
 219  */
 220 #define COFF_ADJUST_SCNHDR_OUT_POST(ABFD,INT,EXT) \
 221 do { \
 222 PUT_SCNHDR_NLNNO(ABFD,((struct internal_scnhdr *)(INT))->s_nlnno,\
 223                 (bfd_byte *)((SCNHDR *)(EXT))->s_nlnno); \
 224 PUT_SCNHDR_NRELOC(ABFD,((struct internal_scnhdr *)(INT))->s_nreloc,\
 225                 (bfd_byte *)((SCNHDR *)(EXT))->s_nreloc); \
 226 PUT_SCNHDR_FLAGS(ABFD,((struct internal_scnhdr *)(INT))->s_flags, \
 227                 (bfd_byte *)((SCNHDR *)(EXT))->s_flags); \
 228 PUT_SCNHDR_PAGE(ABFD,((struct internal_scnhdr *)(INT))->s_page, \
 229                 (bfd_byte *)((SCNHDR *)(EXT))->s_page); \
 230 } while(0)
 231
 232 /* Page macros
 233
 234    The first GDB port requires flags in its remote memory access commands to
 235    distinguish between data/prog space.  Hopefully we can make this go away
 236    eventually.  Stuff the page in the upper bits of a 32-bit address, since
 237    the c5x family only uses 16 or 23 bits.
 238
 239    c2x, c5x and most c54x devices have 16-bit addresses, but the c548 has
 240    23-bit program addresses.  Make sure the page flags don't interfere.
 241    These flags are used by GDB to identify the destination page for
 242    addresses.
 243 */
 244
 245 /* recognized load pages */
 246 #define PG_PROG         0x0         /* PROG page */
 247 #define PG_DATA         0x1         /* DATA page */
 248
 249 #define ADDR_MASK       0x00FFFFFF
 250 #define PG_TO_FLAG(p)   (((unsigned long)(p) & 0xFF) << 24)
 251 #define FLAG_TO_PG(f)   (((f) >> 24) & 0xFF)
 252
 253 /*
 254  * names of "special" sections
 255  */
 256 #define _TEXT   ".text"
 257 #define _DATA   ".data"
 258 #define _BSS    ".bss"
 259 #define _CINIT  ".cinit"            /* initialized C data */
 260 #define _SCONST  ".const"           /* constants */
 261 #define _SWITCH ".switch"           /* switch tables */
 262 #define _STACK  ".stack"            /* C stack */
 263 #define _SYSMEM ".sysmem"           /* used for malloc et al. syscalls */
 264
 265 /********************** LINE NUMBERS **********************/
 266
 267 /* 1 line number entry for every "breakpointable" source line in a section.
 268  * Line numbers are grouped on a per function basis; first entry in a function
 269  * grouping will have l_lnno = 0 and in place of physical address will be the
 270  * symbol table index of the function name.
 271  */
 272 struct external_lineno {
 273   union {
 274     char l_symndx[4];   /* function name symbol index, iff l_lnno == 0*/
 275     char l_paddr[4];    /* (physical) address of line number    */
 276   } l_addr;
 277   char l_lnno[2];       /* line number          */
 278 };
 279
 280 #define LINENO  struct external_lineno
 281 #define LINESZ  6
 282
 283
 284 /********************** SYMBOLS **********************/
 285
 286 /* NOTE: this is what a local label looks like in assembly source; what it
 287    looks like in COFF output is undefined */
 288 #define TICOFF_LOCAL_LABEL_P(NAME) \
 289 ((NAME[0] == '$' && NAME[1] >= '0' && NAME[1] <= '9' && NAME[2] == '\0') \
 290  || NAME[strlen(NAME)-1] == '?')
 291
 292 #define E_SYMNMLEN      8       /* # characters in a symbol name        */
 293 #define E_FILNMLEN      14      /* # characters in a file name          */
 294 #define E_DIMNUM        4       /* # array dimensions in auxiliary entry */
 295
 296 struct external_syment
 297 {
 298   union {
 299     char e_name[E_SYMNMLEN];
 300     struct {
 301       char e_zeroes[4];
 302       char e_offset[4];
 303     } e;
 304   } e;
 305   char e_value[4];
 306   char e_scnum[2];
 307   char e_type[2];
 308   char e_sclass[1];
 309   char e_numaux[1];
 310 };
 311
 312
 313 #define N_BTMASK        (017)
 314 #define N_TMASK         (060)
 315 #define N_BTSHFT        (4)
 316 #define N_TSHIFT        (2)
 317
 318
 319 union external_auxent {
 320   struct {
 321         char x_tagndx[4];       /* str, un, or enum tag indx */
 322         union {
 323           struct {
 324                 char  x_lnno[2]; /* declaration line number */
 325                 char  x_size[2]; /* str/union/array size */
 326           } x_lnsz;
 327           char x_fsize[4];      /* size of function */
 328         } x_misc;
 329         union {
 330           struct {              /* if ISFCN, tag, or .bb */
 331                 char x_lnnoptr[4];      /* ptr to fcn line # */
 332                 char x_endndx[4];       /* entry ndx past block end */
 333           } x_fcn;
 334           struct {              /* if ISARY, up to 4 dimen. */
 335                 char x_dimen[E_DIMNUM][2];
 336           } x_ary;
 337         } x_fcnary;
 338         char x_tvndx[2];                /* tv index */
 339   } x_sym;
 340
 341   union {
 342         char x_fname[E_FILNMLEN];
 343         struct {
 344           char x_zeroes[4];
 345           char x_offset[4];
 346         } x_n;
 347   } x_file;
 348
 349   struct {
 350         char x_scnlen[4];                       /* section length */
 351         char x_nreloc[2];       /* # relocation entries */
 352         char x_nlinno[2];       /* # line numbers */
 353   } x_scn;
 354
 355   struct {
 356         char x_tvfill[4];       /* tv fill value */
 357         char x_tvlen[2];        /* length of .tv */
 358         char x_tvran[2][2];     /* tv range */
 359   } x_tv;               /* info about .tv section (in auxent of symbol .tv)) */
 360
 361
 362 };
 363
 364 #define SYMENT  struct external_syment
 365 #define SYMESZ  18
 366 #define AUXENT  union external_auxent
 367 #define AUXESZ  18
 368
 369 /* section lengths are in target bytes (not host bytes) */
 370 #define GET_SCN_SCNLEN(ABFD,EXT) \
 371 (bfd_h_get_32(ABFD,(bfd_byte *)(EXT)->x_scn.x_scnlen)*bfd_octets_per_byte(ABFD))
 372 #define PUT_SCN_SCNLEN(ABFD,INT,EXT) \
 373 bfd_h_put_32(ABFD,(INT)/bfd_octets_per_byte(ABFD),\
 374              (bfd_byte *)(EXT)->x_scn.x_scnlen)
 375
 376 /* lnsz size is in bits in COFF file, in bytes in BFD */
 377 #define GET_LNSZ_SIZE(abfd, ext) \
 378 (bfd_h_get_16(abfd, (bfd_byte *)ext->x_sym.x_misc.x_lnsz.x_size) / \
 379  (class != C_FIELD ? 8 : 1))
 380
 381 #define PUT_LNSZ_SIZE(abfd, in, ext) \
 382  bfd_h_put_16(abfd, ((class != C_FIELD) ? (in)*8 : (in)), \
 383               (bfd_byte*) ext->x_sym.x_misc.x_lnsz.x_size)
 384
 385 /* TI COFF stores offsets for MOS and MOU in bits; BFD expects bytes */
 386 #define COFF_ADJUST_SYM_IN_POST(ABFD,EXT,INT) \
 387 do { struct internal_syment *dst = (struct internal_syment *)(INT); \
 388 if (dst->n_sclass == C_MOS || dst->n_sclass == C_MOU) dst->n_value /= 8; \
 389 } while (0)
 390
 391 #define COFF_ADJUST_SYM_OUT_POST(ABFD,INT,EXT) \
 392 do { struct internal_syment *src = (struct internal_syment *)(INT); \
 393 SYMENT *dst = (SYMENT *)(EXT); \
 394 if(src->n_sclass == C_MOU || src->n_sclass == C_MOS) \
 395 bfd_h_put_32(abfd,src->n_value * 8,(bfd_byte *)dst->e_value); \
 396 } while (0)
 397
 398 /* Detect section-relative absolute symbols so they get flagged with a sym
 399    index of -1.
 400 */
 401 #define SECTION_RELATIVE_ABSOLUTE_SYMBOL_P(RELOC,SECT) \
 402 ((*(RELOC)->sym_ptr_ptr)->section->output_section == (SECT) \
 403  && (RELOC)->howto->name[0] == 'A')
 404
 405 /********************** RELOCATION DIRECTIVES **********************/
 406
 407 struct external_reloc_v0 {
 408   char r_vaddr[4];
 409   char r_symndx[2];
 410   char r_reserved[2];
 411   char r_type[2];
 412 };
 413
 414 struct external_reloc {
 415   char r_vaddr[4];
 416   char r_symndx[4];
 417   char r_reserved[2]; /* extended pmad byte for COFF2 */
 418   char r_type[2];
 419 };
 420
 421 #define RELOC struct external_reloc
 422 #define RELSZ_V0 10                 /* FIXME -- coffcode.h needs fixing */
 423 #define RELSZ 12                    /* for COFF1/2 */
 424
 425 /* various relocation types.  */
 426 #define R_ABS     0x0000            /* no relocation */
 427 #define R_REL13   0x002A            /* 13-bit direct reference (???) */
 428 #define R_PARTLS7 0x0028            /* 7 LSBs of an address */
 429 #define R_PARTMS9 0x0029            /* 9MSBs of an address */
 430 #define R_EXTWORD 0x002B            /* 23-bit direct reference */
 431 #define R_EXTWORD16 0x002C          /* 16-bit direct reference to 23-bit addr*/
 432 #define R_EXTWORDMS7 0x002D         /* upper 7 bits of 23-bit address */
 433
 434 #endif /* COFF_TI_H */