ld/testsuite/ld-selective/selective.exp

   1 # Expect script for LD selective linking tests
   2 #   Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2009
   3 #   Free Software Foundation, Inc.
   4 #
   5 # This file is part of the GNU Binutils.
   6 #
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 3 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  20 # MA 02110-1301, USA.
  21 #
  22 # Written by Catherine Moore (clm@cygnus.com)
  23 # Make sure that constructors are handled correctly.
  24
  25 # Only ELF based ports support selective linking
  26 if ![is_elf_format] {
  27     return
  28 }
  29
  30 # These targets do not support selective linking
  31 if {[istarget "alpha*-*-*"] || [istarget "am33*-*-*"] ||
  32     [istarget "arc-*-*"] || [istarget "d30v-*-*"] ||
  33     [istarget "dlx-*-*"] || [istarget "hppa*64*-*-*"] ||
  34     [istarget "i370-*-*"] || [istarget "i860-*-*"] ||
  35     [istarget "i960-*-*"] || [istarget "ia64-*-*"] ||
  36     [istarget "m88*-*-*"] || [istarget "mn10200-*-*"] ||
  37     [istarget "mep-*-*"] || [istarget "or32-*-*"] ||
  38     [istarget "pj*-*-*"]} {
  39     return
  40 }
  41
  42 # List contains test-items with three items followed by four lists:
  43 # 1:name 2:test-type (CC or C++; add as needed) 3:filename 4:ld-flags
  44 # 5:must-have-symbols 6:must-not-have-symbols 7:xfail-targets.
  45 #
  46 # If a must(-not)-have symbol is a list, then that list must have two
  47 # items; the symbol name and a value the symbol must (not) have.
  48 #
  49 # Note: ld_nm trims leading `_' from _start
  50 #
  51 # FIXME: Instead of table, read settings from each source-file.
  52 set seltests {
  53   {selective1 C   1.c  {}       {}    {dropme1 dropme2} {}}
  54   {selective2 C   2.c  {}       {}    {foo} {}}
  55   {selective3 C   2.c  {-u foo} {foo} {{foo 0}} {}}
  56   {selective4 C++ 3.cc {}       {start a A::foo() B::foo()} {A::bar()} {mips*-*}}
  57   {selective5 C++ 4.cc {}       {start a A::bar()} {A::foo() B::foo()} {mips*-*}}
  58   {selective6 C++ 5.cc {}       {start a A::bar()}
  59     {A::foo() B::foo() dropme1() dropme2()} {*-*-*}}
  60 }
  61
  62 set cflags "-w -O -ffunction-sections -fdata-sections"
  63 set cxxflags "-fvtable-gc -fno-exceptions -fno-rtti"
  64 set ldflags "--gc-sections -Bstatic"
  65
  66 if [istarget mips*-*] {
  67     # MIPS16 doesn't support PIC code.
  68     set cflags "-mno-abicalls $cflags"
  69     # MIPS ELF uses __start by default, we override it.
  70     set ldflags "-e _start $ldflags"
  71 }
  72
  73 if [istarget sh64*-*-elf] {
  74     # This is what gcc passes to ld by default, plus switch to the
  75     # "usual" ELF _start (shelf32 normally uses just `start' for COFF
  76     # compatibility)
  77     set ldflags "-e _start -mshelf32 $ldflags"
  78 }
  79
  80 # If we don't have g++ for the target, mark all tests as untested.
  81 if { ![is_remote host] && [which $CXX] == 0 } {
  82     foreach testitem $seltests {
  83         untested "[lindex $testitem 0]"
  84     }
  85     return
  86 }
  87
  88 foreach testitem $seltests {
  89     set testname [lindex $testitem 0]
  90     set testtype [lindex $testitem 1]
  91     set testfile [lindex $testitem 2]
  92     set objfile "tmpdir/[file rootname $testfile].o"
  93     set ldfile "tmpdir/[file rootname $testfile].x"
  94     set failed 0
  95
  96     set ldargs [lindex $testitem 3]
  97     set mustsyms [lindex $testitem 4]
  98     set mustnotsyms [lindex $testitem 5]
  99     set xfails [lindex $testitem 6]
 100
 101     foreach xfail_target $xfails {
 102         setup_xfail $xfail_target
 103     }
 104     setup_xfail "arc*-*" "d30v*-*" "dlx*-*" "i370*-*" "i860*-*"
 105     setup_xfail "i960*-*" "mn10200-*" "or32-*" "pj-*"
 106
 107     # It's either C or C++ at the moment.
 108     if { $testtype == "C++" } {
 109         set testflags "$cflags $cxxflags"
 110         set compiler "$CXX"
 111         # Starting with 3.4.0, -fvtable-gc is no longer supported and thus
 112         # the functionality we try to test for cannot be expected to work.
 113         set version [remote_exec host "$CXX -dumpversion"]
 114         set version [lindex $version 1]
 115         if [regexp "^(\[1-9\]\[0-9\]+|\[4-9\]|3.(\[1-9\]\[0-9\]+|\[4-9\]))\\." $version] {
 116             setup_xfail {*-*-*}
 117         }
 118     } else {
 119         set testflags "$cflags"
 120         set compiler "$CC"
 121     }
 122
 123     # Note that we do not actually *use* CXX; we just add cxxflags for C++
 124     # tests.  It might have been a buglet originally; now I think better
 125     # leave as is.
 126     if { ![ld_compile "$compiler $testflags" $srcdir/$subdir/$testfile $objfile] } {
 127         unresolved $testname
 128         continue
 129     }
 130
 131     # V850 targets need libgcc.a
 132     if [istarget v850*-*-elf] {
 133         set libgcc [remote_exec host "$compiler -print-libgcc-file-name"]
 134         set libgcc [lindex $libgcc 1]
 135         regsub -all "\[\r\n\]" $libgcc "" libgcc
 136         set objfile "$objfile $libgcc"
 137     }
 138
 139     # ARM targets need libgcc.a in THUMB mode so that __call_via_r3 is provided
 140     if {[istarget arm-*-*] || [istarget xscale-*-*]} {
 141         set libgcc [remote_exec host "$compiler -print-libgcc-file-name"]
 142         set libgcc [lindex $libgcc 1]
 143         regsub -all "\[\r\n\]" $libgcc "" libgcc
 144         set objfile "$objfile $libgcc"
 145     }
 146
 147     # HPPA linux targets need libgcc.a for millicode routines ($$dyncall).
 148     if [istarget hppa*-*-linux*] {
 149         set libgcc [remote_exec host "$compiler -print-libgcc-file-name"]
 150         set libgcc [lindex $libgcc 1]
 151         regsub -all "\[\r\n\]" $libgcc "" libgcc
 152         set objfile "$objfile $libgcc"
 153     }
 154
 155     # m6811/m6812 code has references to soft registers.
 156     if {[istarget m6811-*-*] || [istarget m6812-*-*]} {
 157         set objfile "$objfile --defsym _.frame=0 --defsym _.d1=0"
 158         set objfile "$objfile --defsym _.d2=0"
 159     }
 160
 161     if ![ld_simple_link $ld $ldfile "$ldflags [join $ldargs] $objfile"] {
 162         fail $testname
 163         continue
 164     }
 165
 166     if ![ld_nm $nm --demangle $ldfile] {
 167         unresolved $testname
 168         continue
 169     }
 170
 171     # Must make V2 demangled names look like V3
 172     foreach nm_output_key [array names nm_output] {
 173         if [regsub \\(void\\) $nm_output_key () new_nm_output_key] {
 174             set nm_output($new_nm_output_key) nm_output($nm_output_key)
 175         }
 176     }
 177
 178     # Check each mandated symbol and optionally mandated values.
 179     foreach mustsym $mustsyms {
 180         if { [llength [concat $mustsym]] == 1 } {
 181             if { ![info exists nm_output($mustsym)] } {
 182                 verbose -log "$testname: missing $mustsym"
 183                 fail $testname
 184                 set failed 1
 185                 break
 186             }
 187         } {
 188             set mustsymname [lindex $mustsym 0]
 189             set mustsymvalue [lindex $mustsym 1]
 190             if { ![info exists nm_output($mustsymname)] } {
 191                 verbose -log "$testname: missing $mustsymname"
 192                 fail $testname
 193                 set failed 1
 194                 break
 195             } {
 196                 if { $nm_output($mustsymname) != $mustsymvalue } {
 197                     verbose -log "$testname: $mustsymname != $mustsymvalue"
 198                     verbose -log "is instead $nm_output($mustsymname)"
 199                     fail $testname
 200                     set failed 1
 201                     break
 202                 }
 203             }
 204         }
 205     }
 206
 207     if { $failed != 0 } {
 208         continue
 209     }
 210
 211     # Check each unwanted symbol, or that symbols do not have specific
 212     # values.
 213     foreach mustnotsym $mustnotsyms {
 214         if { [llength [concat $mustnotsym]] == 1 } {
 215             if { [info exists nm_output($mustnotsym)] } {
 216                 verbose -log "$testname: $mustnotsym == $nm_output($mustnotsym)"
 217                 fail $testname
 218                 set failed 1
 219                 break
 220             }
 221         } {
 222             set mustnotsymname [lindex $mustnotsym 0]
 223             set mustnotsymvalue [lindex $mustnotsym 1]
 224             if { [info exists nm_output($mustnotsymname)] \
 225                     && $nm_output($mustnotsymname) == $mustnotsymvalue} {
 226                 verbose -log "$testname: $mustnotsymname == $mustnotsymvalue"
 227                 fail $testname
 228                 set failed 1
 229                 break
 230             }
 231         }
 232     }
 233
 234     if { $failed == 0 } {
 235         pass $testname
 236     }
 237 }