ltmain.sh

   1 # Generated from ltmain.m4sh.
   2
   3 # ltmain.sh (GNU libtool) 2.2.6
   4 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
   5
   6 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
   7 # This is free software; see the source for copying conditions.  There is NO
   8 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
   9
  10 # GNU Libtool is free software; you can redistribute it and/or modify
  11 # it under the terms of the GNU General Public License as published by
  12 # the Free Software Foundation; either version 2 of the License, or
  13 # (at your option) any later version.
  14 #
  15 # As a special exception to the GNU General Public License,
  16 # if you distribute this file as part of a program or library that
  17 # is built using GNU Libtool, you may include this file under the
  18 # same distribution terms that you use for the rest of that program.
  19 #
  20 # GNU Libtool is distributed in the hope that it will be useful, but
  21 # WITHOUT ANY WARRANTY; without even the implied warranty of
  22 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  23 # General Public License for more details.
  24 #
  25 # You should have received a copy of the GNU General Public License
  26 # along with GNU Libtool; see the file COPYING.  If not, a copy
  27 # can be downloaded from http://www.gnu.org/licenses/gpl.html,
  28 # or obtained by writing to the Free Software Foundation, Inc.,
  29 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  30
  31 # Usage: $progname [OPTION]... [MODE-ARG]...
  32 #
  33 # Provide generalized library-building support services.
  34 #
  35 #     --config             show all configuration variables
  36 #     --debug              enable verbose shell tracing
  37 # -n, --dry-run            display commands without modifying any files
  38 #     --features           display basic configuration information and exit
  39 #     --mode=MODE          use operation mode MODE
  40 #     --preserve-dup-deps  don't remove duplicate dependency libraries
  41 #     --quiet, --silent    don't print informational messages
  42 #     --tag=TAG            use configuration variables from tag TAG
  43 # -v, --verbose            print informational messages (default)
  44 #     --version            print version information
  45 # -h, --help               print short or long help message
  46 #
  47 # MODE must be one of the following:
  48 #
  49 #       clean              remove files from the build directory
  50 #       compile            compile a source file into a libtool object
  51 #       execute            automatically set library path, then run a program
  52 #       finish             complete the installation of libtool libraries
  53 #       install            install libraries or executables
  54 #       link               create a library or an executable
  55 #       uninstall          remove libraries from an installed directory
  56 #
  57 # MODE-ARGS vary depending on the MODE.
  58 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
  59 #
  60 # When reporting a bug, please describe a test case to reproduce it and
  61 # include the following information:
  62 #
  63 #       host-triplet:   $host
  64 #       shell:          $SHELL
  65 #       compiler:               $LTCC
  66 #       compiler flags:         $LTCFLAGS
  67 #       linker:         $LD (gnu? $with_gnu_ld)
  68 #       $progname:              (GNU libtool) 2.2.6
  69 #       automake:               $automake_version
  70 #       autoconf:               $autoconf_version
  71 #
  72 # Report bugs to <bug-libtool@gnu.org>.
  73
  74 PROGRAM=ltmain.sh
  75 PACKAGE=libtool
  76 VERSION=2.2.6
  77 TIMESTAMP=""
  78 package_revision=1.3012
  79
  80 # Be Bourne compatible
  81 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  82   emulate sh
  83   NULLCMD=:
  84   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  85   # is contrary to our usage.  Disable this feature.
  86   alias -g '${1+"$@"}'='"$@"'
  87   setopt NO_GLOB_SUBST
  88 else
  89   case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
  90 fi
  91 BIN_SH=xpg4; export BIN_SH # for Tru64
  92 DUALCASE=1; export DUALCASE # for MKS sh
  93
  94 # NLS nuisances: We save the old values to restore during execute mode.
  95 # Only set LANG and LC_ALL to C if already set.
  96 # These must not be set unconditionally because not all systems understand
  97 # e.g. LANG=C (notably SCO).
  98 lt_user_locale=
  99 lt_safe_locale=
 100 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
 101 do
 102   eval "if test \"\${$lt_var+set}\" = set; then
 103           save_$lt_var=\$$lt_var
 104           $lt_var=C
 105           export $lt_var
 106           lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
 107           lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
 108         fi"
 109 done
 110
 111 $lt_unset CDPATH
 112
 113
 114
 115
 116
 117 : ${CP="cp -f"}
 118 : ${ECHO="echo"}
 119 : ${EGREP="/usr/bin/grep -E"}
 120 : ${FGREP="/usr/bin/grep -F"}
 121 : ${GREP="/usr/bin/grep"}
 122 : ${LN_S="ln -s"}
 123 : ${MAKE="make"}
 124 : ${MKDIR="mkdir"}
 125 : ${MV="mv -f"}
 126 : ${RM="rm -f"}
 127 : ${SED="/opt/local/bin/gsed"}
 128 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
 129 : ${Xsed="$SED -e 1s/^X//"}
 130
 131 # Global variables:
 132 EXIT_SUCCESS=0
 133 EXIT_FAILURE=1
 134 EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
 135 EXIT_SKIP=77      # $? = 77 is used to indicate a skipped test to automake.
 136
 137 exit_status=$EXIT_SUCCESS
 138
 139 # Make sure IFS has a sensible default
 140 lt_nl='
 141 '
 142 IFS="   $lt_nl"
 143
 144 dirname="s,/[^/]*$,,"
 145 basename="s,^.*/,,"
 146
 147 # func_dirname_and_basename file append nondir_replacement
 148 # perform func_basename and func_dirname in a single function
 149 # call:
 150 #   dirname:  Compute the dirname of FILE.  If nonempty,
 151 #             add APPEND to the result, otherwise set result
 152 #             to NONDIR_REPLACEMENT.
 153 #             value returned in "$func_dirname_result"
 154 #   basename: Compute filename of FILE.
 155 #             value retuned in "$func_basename_result"
 156 # Implementation must be kept synchronized with func_dirname
 157 # and func_basename. For efficiency, we do not delegate to
 158 # those functions but instead duplicate the functionality here.
 159 func_dirname_and_basename ()
 160 {
 161   # Extract subdirectory from the argument.
 162   func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
 163   if test "X$func_dirname_result" = "X${1}"; then
 164     func_dirname_result="${3}"
 165   else
 166     func_dirname_result="$func_dirname_result${2}"
 167   fi
 168   func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 169 }
 170
 171 # Generated shell functions inserted here.
 172
 173 # These SED scripts presuppose an absolute path with a trailing slash.
 174 pathcar="s,^/\([^/]*\).*$,\1,"
 175 pathcdr="s,^/[^/]*,,"
 176 removedotparts="s@/\(\./\)\{1,\}@/@g;s,/\.$,/,"
 177 collapseslashes="s@/\{1,\}@/@g"
 178 finalslash="s,/*$,/,"
 179
 180 # func_normal_abspath PATH
 181 # Remove doubled-up and trailing slashes, "." path components,
 182 # and cancel out any ".." path components in PATH after making
 183 # it an absolute path.
 184 #             value returned in "$func_normal_abspath_result"
 185 func_normal_abspath ()
 186 {
 187   # Start from root dir and reassemble the path.
 188   func_normal_abspath_result=
 189   func_normal_abspath_tpath=$1
 190   func_normal_abspath_altnamespace=
 191   case $func_normal_abspath_tpath in
 192     "")
 193       # Empty path, that just means $cwd.
 194       func_stripname '' '/' "`pwd`"
 195       func_normal_abspath_result=$func_stripname_result
 196       return
 197     ;;
 198     # The next three entries are used to spot a run of precisely
 199     # two leading slashes without using negated character classes;
 200     # we take advantage of case's first-match behaviour.
 201     ///*)
 202       # Unusual form of absolute path, do nothing.
 203     ;;
 204     //*)
 205       # Not necessarily an ordinary path; POSIX reserves leading '//'
 206       # and for example Cygwin uses it to access remote file shares
 207       # over CIFS/SMB, so we conserve a leading double slash if found.
 208       func_normal_abspath_altnamespace=/
 209     ;;
 210     /*)
 211       # Absolute path, do nothing.
 212     ;;
 213     *)
 214       # Relative path, prepend $cwd.
 215       func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
 216     ;;
 217   esac
 218   # Cancel out all the simple stuff to save iterations.  We also want
 219   # the path to end with a slash for ease of parsing, so make sure
 220   # there is one (and only one) here.
 221   func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
 222         -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
 223   while :; do
 224     # Processed it all yet?
 225     if test "$func_normal_abspath_tpath" = / ; then
 226       # If we ascended to the root using ".." the result may be empty now.
 227       if test -z "$func_normal_abspath_result" ; then
 228         func_normal_abspath_result=/
 229       fi
 230       break
 231     fi
 232     func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
 233         -e "$pathcar"`
 234     func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
 235         -e "$pathcdr"`
 236     # Figure out what to do with it
 237     case $func_normal_abspath_tcomponent in
 238       "")
 239         # Trailing empty path component, ignore it.
 240       ;;
 241       ..)
 242         # Parent dir; strip last assembled component from result.
 243         func_dirname "$func_normal_abspath_result"
 244         func_normal_abspath_result=$func_dirname_result
 245       ;;
 246       *)
 247         # Actual path component, append it.
 248         func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
 249       ;;
 250     esac
 251   done
 252   # Restore leading double-slash if one was found on entry.
 253   func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
 254 }
 255
 256 # func_relative_path SRCDIR DSTDIR
 257 # generates a relative path from SRCDIR to DSTDIR, with a trailing
 258 # slash if non-empty, suitable for immediately appending a filename
 259 # without needing to append a separator.
 260 #             value returned in "$func_relative_path_result"
 261 func_relative_path ()
 262 {
 263   func_relative_path_result=
 264   func_normal_abspath "$1"
 265   func_relative_path_tlibdir=$func_normal_abspath_result
 266   func_normal_abspath "$2"
 267   func_relative_path_tbindir=$func_normal_abspath_result
 268
 269   # Ascend the tree starting from libdir
 270   while :; do
 271     # check if we have found a prefix of bindir
 272     case $func_relative_path_tbindir in
 273       $func_relative_path_tlibdir)
 274         # found an exact match
 275         func_relative_path_tcancelled=
 276         break
 277         ;;
 278       $func_relative_path_tlibdir*)
 279         # found a matching prefix
 280         func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
 281         func_relative_path_tcancelled=$func_stripname_result
 282         if test -z "$func_relative_path_result"; then
 283           func_relative_path_result=.
 284         fi
 285         break
 286         ;;
 287       *)
 288         func_dirname $func_relative_path_tlibdir
 289         func_relative_path_tlibdir=${func_dirname_result}
 290         if test "x$func_relative_path_tlibdir" = x ; then
 291           # Have to descend all the way to the root!
 292           func_relative_path_result=../$func_relative_path_result
 293           func_relative_path_tcancelled=$func_relative_path_tbindir
 294           break
 295         fi
 296         func_relative_path_result=../$func_relative_path_result
 297         ;;
 298     esac
 299   done
 300
 301   # Now calculate path; take care to avoid doubling-up slashes.
 302   func_stripname '' '/' "$func_relative_path_result"
 303   func_relative_path_result=$func_stripname_result
 304   func_stripname '/' '/' "$func_relative_path_tcancelled"
 305   if test "x$func_stripname_result" != x ; then
 306     func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
 307   fi
 308
 309   # Normalisation. If bindir is libdir, return empty string,
 310   # else relative path ending with a slash; either way, target
 311   # file name can be directly appended.
 312   if test ! -z "$func_relative_path_result"; then
 313     func_stripname './' '' "$func_relative_path_result/"
 314     func_relative_path_result=$func_stripname_result
 315   fi
 316 }
 317
 318 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
 319 # is ksh but when the shell is invoked as "sh" and the current value of
 320 # the _XPG environment variable is not equal to 1 (one), the special
 321 # positional parameter $0, within a function call, is the name of the
 322 # function.
 323 progpath="$0"
 324
 325 # The name of this program:
 326 # In the unlikely event $progname began with a '-', it would play havoc with
 327 # func_echo (imagine progname=-n), so we prepend ./ in that case:
 328 func_dirname_and_basename "$progpath"
 329 progname=$func_basename_result
 330 case $progname in
 331   -*) progname=./$progname ;;
 332 esac
 333
 334 # Make sure we have an absolute path for reexecution:
 335 case $progpath in
 336   [\\/]*|[A-Za-z]:\\*) ;;
 337   *[\\/]*)
 338      progdir=$func_dirname_result
 339      progdir=`cd "$progdir" && pwd`
 340      progpath="$progdir/$progname"
 341      ;;
 342   *)
 343      save_IFS="$IFS"
 344      IFS=:
 345      for progdir in $PATH; do
 346        IFS="$save_IFS"
 347        test -x "$progdir/$progname" && break
 348      done
 349      IFS="$save_IFS"
 350      test -n "$progdir" || progdir=`pwd`
 351      progpath="$progdir/$progname"
 352      ;;
 353 esac
 354
 355 # Sed substitution that helps us do robust quoting.  It backslashifies
 356 # metacharacters that are still active within double-quoted strings.
 357 Xsed="${SED}"' -e 1s/^X//'
 358 sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
 359
 360 # Same as above, but do not quote variable references.
 361 double_quote_subst='s/\(["`\\]\)/\\\1/g'
 362
 363 # Re-`\' parameter expansions in output of double_quote_subst that were
 364 # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
 365 # in input to double_quote_subst, that '$' was protected from expansion.
 366 # Since each input `\' is now two `\'s, look for any number of runs of
 367 # four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
 368 bs='\\'
 369 bs2='\\\\'
 370 bs4='\\\\\\\\'
 371 dollar='\$'
 372 sed_double_backslash="\
 373   s/$bs4/&\\
 374 /g
 375   s/^$bs2$dollar/$bs&/
 376   s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
 377   s/\n//g"
 378
 379 # Standard options:
 380 opt_dry_run=false
 381 opt_help=false
 382 opt_quiet=false
 383 opt_verbose=false
 384 opt_warning=:
 385
 386 # func_echo arg...
 387 # Echo program name prefixed message, along with the current mode
 388 # name if it has been set yet.
 389 func_echo ()
 390 {
 391     $ECHO "$progname${mode+: }$mode: $*"
 392 }
 393
 394 # func_verbose arg...
 395 # Echo program name prefixed message in verbose mode only.
 396 func_verbose ()
 397 {
 398     $opt_verbose && func_echo ${1+"$@"}
 399
 400     # A bug in bash halts the script if the last line of a function
 401     # fails when set -e is in force, so we need another command to
 402     # work around that:
 403     :
 404 }
 405
 406 # func_error arg...
 407 # Echo program name prefixed message to standard error.
 408 func_error ()
 409 {
 410     $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
 411 }
 412
 413 # func_warning arg...
 414 # Echo program name prefixed warning message to standard error.
 415 func_warning ()
 416 {
 417     $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
 418
 419     # bash bug again:
 420     :
 421 }
 422
 423 # func_fatal_error arg...
 424 # Echo program name prefixed message to standard error, and exit.
 425 func_fatal_error ()
 426 {
 427     func_error ${1+"$@"}
 428     exit $EXIT_FAILURE
 429 }
 430
 431 # func_fatal_help arg...
 432 # Echo program name prefixed message to standard error, followed by
 433 # a help hint, and exit.
 434 func_fatal_help ()
 435 {
 436     func_error ${1+"$@"}
 437     func_fatal_error "$help"
 438 }
 439 help="Try \`$progname --help' for more information."  ## default
 440
 441
 442 # func_grep expression filename
 443 # Check whether EXPRESSION matches any line of FILENAME, without output.
 444 func_grep ()
 445 {
 446     $GREP "$1" "$2" >/dev/null 2>&1
 447 }
 448
 449
 450 # func_mkdir_p directory-path
 451 # Make sure the entire path to DIRECTORY-PATH is available.
 452 func_mkdir_p ()
 453 {
 454     my_directory_path="$1"
 455     my_dir_list=
 456
 457     if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
 458
 459       # Protect directory names starting with `-'
 460       case $my_directory_path in
 461         -*) my_directory_path="./$my_directory_path" ;;
 462       esac
 463
 464       # While some portion of DIR does not yet exist...
 465       while test ! -d "$my_directory_path"; do
 466         # ...make a list in topmost first order.  Use a colon delimited
 467         # list incase some portion of path contains whitespace.
 468         my_dir_list="$my_directory_path:$my_dir_list"
 469
 470         # If the last portion added has no slash in it, the list is done
 471         case $my_directory_path in */*) ;; *) break ;; esac
 472
 473         # ...otherwise throw away the child directory and loop
 474         my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
 475       done
 476       my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
 477
 478       save_mkdir_p_IFS="$IFS"; IFS=':'
 479       for my_dir in $my_dir_list; do
 480         IFS="$save_mkdir_p_IFS"
 481         # mkdir can fail with a `File exist' error if two processes
 482         # try to create one of the directories concurrently.  Don't
 483         # stop in that case!
 484         $MKDIR "$my_dir" 2>/dev/null || :
 485       done
 486       IFS="$save_mkdir_p_IFS"
 487
 488       # Bail out if we (or some other process) failed to create a directory.
 489       test -d "$my_directory_path" || \
 490         func_fatal_error "Failed to create \`$1'"
 491     fi
 492 }
 493
 494
 495 # func_mktempdir [string]
 496 # Make a temporary directory that won't clash with other running
 497 # libtool processes, and avoids race conditions if possible.  If
 498 # given, STRING is the basename for that directory.
 499 func_mktempdir ()
 500 {
 501     my_template="${TMPDIR-/tmp}/${1-$progname}"
 502
 503     if test "$opt_dry_run" = ":"; then
 504       # Return a directory name, but don't create it in dry-run mode
 505       my_tmpdir="${my_template}-$$"
 506     else
 507
 508       # If mktemp works, use that first and foremost
 509       my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
 510
 511       if test ! -d "$my_tmpdir"; then
 512         # Failing that, at least try and use $RANDOM to avoid a race
 513         my_tmpdir="${my_template}-${RANDOM-0}$$"
 514
 515         save_mktempdir_umask=`umask`
 516         umask 0077
 517         $MKDIR "$my_tmpdir"
 518         umask $save_mktempdir_umask
 519       fi
 520
 521       # If we're not in dry-run mode, bomb out on failure
 522       test -d "$my_tmpdir" || \
 523         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
 524     fi
 525
 526     $ECHO "X$my_tmpdir" | $Xsed
 527 }
 528
 529
 530 # func_quote_for_eval arg
 531 # Aesthetically quote ARG to be evaled later.
 532 # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
 533 # is double-quoted, suitable for a subsequent eval, whereas
 534 # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
 535 # which are still active within double quotes backslashified.
 536 func_quote_for_eval ()
 537 {
 538     case $1 in
 539       *[\\\`\"\$]*)
 540         func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
 541       *)
 542         func_quote_for_eval_unquoted_result="$1" ;;
 543     esac
 544
 545     case $func_quote_for_eval_unquoted_result in
 546       # Double-quote args containing shell metacharacters to delay
 547       # word splitting, command substitution and and variable
 548       # expansion for a subsequent eval.
 549       # Many Bourne shells cannot handle close brackets correctly
 550       # in scan sets, so we specify it separately.
 551       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
 552         func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
 553         ;;
 554       *)
 555         func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
 556     esac
 557 }
 558
 559
 560 # func_quote_for_expand arg
 561 # Aesthetically quote ARG to be evaled later; same as above,
 562 # but do not quote variable references.
 563 func_quote_for_expand ()
 564 {
 565     case $1 in
 566       *[\\\`\"]*)
 567         my_arg=`$ECHO "X$1" | $Xsed \
 568             -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
 569       *)
 570         my_arg="$1" ;;
 571     esac
 572
 573     case $my_arg in
 574       # Double-quote args containing shell metacharacters to delay
 575       # word splitting and command substitution for a subsequent eval.
 576       # Many Bourne shells cannot handle close brackets correctly
 577       # in scan sets, so we specify it separately.
 578       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
 579         my_arg="\"$my_arg\""
 580         ;;
 581     esac
 582
 583     func_quote_for_expand_result="$my_arg"
 584 }
 585
 586
 587 # func_show_eval cmd [fail_exp]
 588 # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
 589 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 590 # is given, then evaluate it.
 591 func_show_eval ()
 592 {
 593     my_cmd="$1"
 594     my_fail_exp="${2-:}"
 595
 596     ${opt_silent-false} || {
 597       func_quote_for_expand "$my_cmd"
 598       eval "func_echo $func_quote_for_expand_result"
 599     }
 600
 601     if ${opt_dry_run-false}; then :; else
 602       eval "$my_cmd"
 603       my_status=$?
 604       if test "$my_status" -eq 0; then :; else
 605         eval "(exit $my_status); $my_fail_exp"
 606       fi
 607     fi
 608 }
 609
 610
 611 # func_show_eval_locale cmd [fail_exp]
 612 # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
 613 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 614 # is given, then evaluate it.  Use the saved locale for evaluation.
 615 func_show_eval_locale ()
 616 {
 617     my_cmd="$1"
 618     my_fail_exp="${2-:}"
 619
 620     ${opt_silent-false} || {
 621       func_quote_for_expand "$my_cmd"
 622       eval "func_echo $func_quote_for_expand_result"
 623     }
 624
 625     if ${opt_dry_run-false}; then :; else
 626       eval "$lt_user_locale
 627             $my_cmd"
 628       my_status=$?
 629       eval "$lt_safe_locale"
 630       if test "$my_status" -eq 0; then :; else
 631         eval "(exit $my_status); $my_fail_exp"
 632       fi
 633     fi
 634 }
 635
 636
 637
 638
 639
 640 # func_version
 641 # Echo version message to standard output and exit.
 642 func_version ()
 643 {
 644     $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
 645         s/^# //
 646         s/^# *$//
 647         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
 648         p
 649      }' < "$progpath"
 650      exit $?
 651 }
 652
 653 # func_usage
 654 # Echo short help message to standard output and exit.
 655 func_usage ()
 656 {
 657     $SED -n '/^# Usage:/,/# -h/ {
 658         s/^# //
 659         s/^# *$//
 660         s/\$progname/'$progname'/
 661         p
 662     }' < "$progpath"
 663     $ECHO
 664     $ECHO "run \`$progname --help | more' for full usage"
 665     exit $?
 666 }
 667
 668 # func_help
 669 # Echo long help message to standard output and exit.
 670 func_help ()
 671 {
 672     $SED -n '/^# Usage:/,/# Report bugs to/ {
 673         s/^# //
 674         s/^# *$//
 675         s*\$progname*'$progname'*
 676         s*\$host*'"$host"'*
 677         s*\$SHELL*'"$SHELL"'*
 678         s*\$LTCC*'"$LTCC"'*
 679         s*\$LTCFLAGS*'"$LTCFLAGS"'*
 680         s*\$LD*'"$LD"'*
 681         s/\$with_gnu_ld/'"$with_gnu_ld"'/
 682         s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
 683         s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
 684         p
 685      }' < "$progpath"
 686     exit $?
 687 }
 688
 689 # func_missing_arg argname
 690 # Echo program name prefixed message to standard error and set global
 691 # exit_cmd.
 692 func_missing_arg ()
 693 {
 694     func_error "missing argument for $1"
 695     exit_cmd=exit
 696 }
 697
 698 exit_cmd=:
 699
 700
 701
 702
 703
 704 # Check that we have a working $ECHO.
 705 if test "X$1" = X--no-reexec; then
 706   # Discard the --no-reexec flag, and continue.
 707   shift
 708 elif test "X$1" = X--fallback-echo; then
 709   # Avoid inline document here, it may be left over
 710   :
 711 elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
 712   # Yippee, $ECHO works!
 713   :
 714 else
 715   # Restart under the correct shell, and then maybe $ECHO will work.
 716   exec $SHELL "$progpath" --no-reexec ${1+"$@"}
 717 fi
 718
 719 if test "X$1" = X--fallback-echo; then
 720   # used as fallback echo
 721   shift
 722   cat <<EOF
 723 $*
 724 EOF
 725   exit $EXIT_SUCCESS
 726 fi
 727
 728 magic="%%%MAGIC variable%%%"
 729 magic_exe="%%%MAGIC EXE variable%%%"
 730
 731 # Global variables.
 732 # $mode is unset
 733 nonopt=
 734 execute_dlfiles=
 735 preserve_args=
 736 lo2o="s/\\.lo\$/.${objext}/"
 737 o2lo="s/\\.${objext}\$/.lo/"
 738 extracted_archives=
 739 extracted_serial=0
 740
 741 opt_dry_run=false
 742 opt_duplicate_deps=false
 743 opt_silent=false
 744 opt_debug=:
 745
 746 # If this variable is set in any of the actions, the command in it
 747 # will be execed at the end.  This prevents here-documents from being
 748 # left over by shells.
 749 exec_cmd=
 750
 751 # func_fatal_configuration arg...
 752 # Echo program name prefixed message to standard error, followed by
 753 # a configuration failure hint, and exit.
 754 func_fatal_configuration ()
 755 {
 756     func_error ${1+"$@"}
 757     func_error "See the $PACKAGE documentation for more information."
 758     func_fatal_error "Fatal configuration error."
 759 }
 760
 761
 762 # func_config
 763 # Display the configuration for all the tags in this script.
 764 func_config ()
 765 {
 766     re_begincf='^# ### BEGIN LIBTOOL'
 767     re_endcf='^# ### END LIBTOOL'
 768
 769     # Default configuration.
 770     $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
 771
 772     # Now print the configurations for the tags.
 773     for tagname in $taglist; do
 774       $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
 775     done
 776
 777     exit $?
 778 }
 779
 780 # func_features
 781 # Display the features supported by this script.
 782 func_features ()
 783 {
 784     $ECHO "host: $host"
 785     if test "$build_libtool_libs" = yes; then
 786       $ECHO "enable shared libraries"
 787     else
 788       $ECHO "disable shared libraries"
 789     fi
 790     if test "$build_old_libs" = yes; then
 791       $ECHO "enable static libraries"
 792     else
 793       $ECHO "disable static libraries"
 794     fi
 795
 796     exit $?
 797 }
 798
 799 # func_enable_tag tagname
 800 # Verify that TAGNAME is valid, and either flag an error and exit, or
 801 # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
 802 # variable here.
 803 func_enable_tag ()
 804 {
 805   # Global variable:
 806   tagname="$1"
 807
 808   re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
 809   re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
 810   sed_extractcf="/$re_begincf/,/$re_endcf/p"
 811
 812   # Validate tagname.
 813   case $tagname in
 814     *[!-_A-Za-z0-9,/]*)
 815       func_fatal_error "invalid tag name: $tagname"
 816       ;;
 817   esac
 818
 819   # Don't test for the "default" C tag, as we know it's
 820   # there but not specially marked.
 821   case $tagname in
 822     CC) ;;
 823     *)
 824       if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
 825         taglist="$taglist $tagname"
 826
 827         # Evaluate the configuration.  Be careful to quote the path
 828         # and the sed script, to avoid splitting on whitespace, but
 829         # also don't use non-portable quotes within backquotes within
 830         # quotes we have to do it in 2 steps:
 831         extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
 832         eval "$extractedcf"
 833       else
 834         func_error "ignoring unknown tag $tagname"
 835       fi
 836       ;;
 837   esac
 838 }
 839
 840 # Parse options once, thoroughly.  This comes as soon as possible in
 841 # the script to make things like `libtool --version' happen quickly.
 842 {
 843
 844   # Shorthand for --mode=foo, only valid as the first argument
 845   case $1 in
 846   clean|clea|cle|cl)
 847     shift; set dummy --mode clean ${1+"$@"}; shift
 848     ;;
 849   compile|compil|compi|comp|com|co|c)
 850     shift; set dummy --mode compile ${1+"$@"}; shift
 851     ;;
 852   execute|execut|execu|exec|exe|ex|e)
 853     shift; set dummy --mode execute ${1+"$@"}; shift
 854     ;;
 855   finish|finis|fini|fin|fi|f)
 856     shift; set dummy --mode finish ${1+"$@"}; shift
 857     ;;
 858   install|instal|insta|inst|ins|in|i)
 859     shift; set dummy --mode install ${1+"$@"}; shift
 860     ;;
 861   link|lin|li|l)
 862     shift; set dummy --mode link ${1+"$@"}; shift
 863     ;;
 864   uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
 865     shift; set dummy --mode uninstall ${1+"$@"}; shift
 866     ;;
 867   esac
 868
 869   # Parse non-mode specific arguments:
 870   while test "$#" -gt 0; do
 871     opt="$1"
 872     shift
 873
 874     case $opt in
 875       --config)         func_config                                     ;;
 876
 877       --debug)          preserve_args="$preserve_args $opt"
 878                         func_echo "enabling shell trace mode"
 879                         opt_debug='set -x'
 880                         $opt_debug
 881                         ;;
 882
 883       -dlopen)          test "$#" -eq 0 && func_missing_arg "$opt" && break
 884                         execute_dlfiles="$execute_dlfiles $1"
 885                         shift
 886                         ;;
 887
 888       --dry-run | -n)   opt_dry_run=:                                   ;;
 889       --features)       func_features                                   ;;
 890       --finish)         mode="finish"                                   ;;
 891
 892       --mode)           test "$#" -eq 0 && func_missing_arg "$opt" && break
 893                         case $1 in
 894                           # Valid mode arguments:
 895                           clean)        ;;
 896                           compile)      ;;
 897                           execute)      ;;
 898                           finish)       ;;
 899                           install)      ;;
 900                           link)         ;;
 901                           relink)       ;;
 902                           uninstall)    ;;
 903
 904                           # Catch anything else as an error
 905                           *) func_error "invalid argument for $opt"
 906                              exit_cmd=exit
 907                              break
 908                              ;;
 909                         esac
 910
 911                         mode="$1"
 912                         shift
 913                         ;;
 914
 915       --preserve-dup-deps)
 916                         opt_duplicate_deps=:                            ;;
 917
 918       --quiet|--silent) preserve_args="$preserve_args $opt"
 919                         opt_silent=:
 920                         ;;
 921
 922       --verbose| -v)    preserve_args="$preserve_args $opt"
 923                         opt_silent=false
 924                         ;;
 925
 926       --tag)            test "$#" -eq 0 && func_missing_arg "$opt" && break
 927                         preserve_args="$preserve_args $opt $1"
 928                         func_enable_tag "$1"    # tagname is set here
 929                         shift
 930                         ;;
 931
 932       # Separate optargs to long options:
 933       -dlopen=*|--mode=*|--tag=*)
 934                         func_opt_split "$opt"
 935                         set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
 936                         shift
 937                         ;;
 938
 939       -\?|-h)           func_usage                                      ;;
 940       --help)           opt_help=:                                      ;;
 941       --version)        func_version                                    ;;
 942
 943       -*)               func_fatal_help "unrecognized option \`$opt'"   ;;
 944
 945       *)                nonopt="$opt"
 946                         break
 947                         ;;
 948     esac
 949   done
 950
 951
 952   case $host in
 953     *cygwin* | *mingw* | *pw32* | *cegcc*)
 954       # don't eliminate duplications in $postdeps and $predeps
 955       opt_duplicate_compiler_generated_deps=:
 956       ;;
 957     *)
 958       opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
 959       ;;
 960   esac
 961
 962   # Having warned about all mis-specified options, bail out if
 963   # anything was wrong.
 964   $exit_cmd $EXIT_FAILURE
 965 }
 966
 967 # func_check_version_match
 968 # Ensure that we are using m4 macros, and libtool script from the same
 969 # release of libtool.
 970 func_check_version_match ()
 971 {
 972   if test "$package_revision" != "$macro_revision"; then
 973     if test "$VERSION" != "$macro_version"; then
 974       if test -z "$macro_version"; then
 975         cat >&2 <<_LT_EOF
 976 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 977 $progname: definition of this LT_INIT comes from an older release.
 978 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 979 $progname: and run autoconf again.
 980 _LT_EOF
 981       else
 982         cat >&2 <<_LT_EOF
 983 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 984 $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
 985 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 986 $progname: and run autoconf again.
 987 _LT_EOF
 988       fi
 989     else
 990       cat >&2 <<_LT_EOF
 991 $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
 992 $progname: but the definition of this LT_INIT comes from revision $macro_revision.
 993 $progname: You should recreate aclocal.m4 with macros from revision $package_revision
 994 $progname: of $PACKAGE $VERSION and run autoconf again.
 995 _LT_EOF
 996     fi
 997
 998     exit $EXIT_MISMATCH
 999   fi
1000 }
1001
1002
1003 ## ----------- ##
1004 ##    Main.    ##
1005 ## ----------- ##
1006
1007 $opt_help || {
1008   # Sanity checks first:
1009   func_check_version_match
1010
1011   if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
1012     func_fatal_configuration "not configured to build any kind of library"
1013   fi
1014
1015   test -z "$mode" && func_fatal_error "error: you must specify a MODE."
1016
1017
1018   # Darwin sucks
1019   eval std_shrext=\"$shrext_cmds\"
1020
1021
1022   # Only execute mode is allowed to have -dlopen flags.
1023   if test -n "$execute_dlfiles" && test "$mode" != execute; then
1024     func_error "unrecognized option \`-dlopen'"
1025     $ECHO "$help" 1>&2
1026     exit $EXIT_FAILURE
1027   fi
1028
1029   # Change the help message to a mode-specific one.
1030   generic_help="$help"
1031   help="Try \`$progname --help --mode=$mode' for more information."
1032 }
1033
1034
1035 # func_lalib_p file
1036 # True iff FILE is a libtool `.la' library or `.lo' object file.
1037 # This function is only a basic sanity check; it will hardly flush out
1038 # determined imposters.
1039 func_lalib_p ()
1040 {
1041     test -f "$1" &&
1042       $SED -e 4q "$1" 2>/dev/null \
1043         | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
1044 }
1045
1046 # func_lalib_unsafe_p file
1047 # True iff FILE is a libtool `.la' library or `.lo' object file.
1048 # This function implements the same check as func_lalib_p without
1049 # resorting to external programs.  To this end, it redirects stdin and
1050 # closes it afterwards, without saving the original file descriptor.
1051 # As a safety measure, use it only where a negative result would be
1052 # fatal anyway.  Works if `file' does not exist.
1053 func_lalib_unsafe_p ()
1054 {
1055     lalib_p=no
1056     if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
1057         for lalib_p_l in 1 2 3 4
1058         do
1059             read lalib_p_line
1060             case "$lalib_p_line" in
1061                 \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
1062             esac
1063         done
1064         exec 0<&5 5<&-
1065     fi
1066     test "$lalib_p" = yes
1067 }
1068
1069 # func_ltwrapper_script_p file
1070 # True iff FILE is a libtool wrapper script
1071 # This function is only a basic sanity check; it will hardly flush out
1072 # determined imposters.
1073 func_ltwrapper_script_p ()
1074 {
1075     func_lalib_p "$1"
1076 }
1077
1078 # func_ltwrapper_executable_p file
1079 # True iff FILE is a libtool wrapper executable
1080 # This function is only a basic sanity check; it will hardly flush out
1081 # determined imposters.
1082 func_ltwrapper_executable_p ()
1083 {
1084     func_ltwrapper_exec_suffix=
1085     case $1 in
1086     *.exe) ;;
1087     *) func_ltwrapper_exec_suffix=.exe ;;
1088     esac
1089     $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
1090 }
1091
1092 # func_ltwrapper_scriptname file
1093 # Assumes file is an ltwrapper_executable
1094 # uses $file to determine the appropriate filename for a
1095 # temporary ltwrapper_script.
1096 func_ltwrapper_scriptname ()
1097 {
1098     func_ltwrapper_scriptname_result=""
1099     if func_ltwrapper_executable_p "$1"; then
1100         func_dirname_and_basename "$1" "" "."
1101         func_stripname '' '.exe' "$func_basename_result"
1102         func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
1103     fi
1104 }
1105
1106 # func_ltwrapper_p file
1107 # True iff FILE is a libtool wrapper script or wrapper executable
1108 # This function is only a basic sanity check; it will hardly flush out
1109 # determined imposters.
1110 func_ltwrapper_p ()
1111 {
1112     func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
1113 }
1114
1115
1116 # func_execute_cmds commands fail_cmd
1117 # Execute tilde-delimited COMMANDS.
1118 # If FAIL_CMD is given, eval that upon failure.
1119 # FAIL_CMD may read-access the current command in variable CMD!
1120 func_execute_cmds ()
1121 {
1122     $opt_debug
1123     save_ifs=$IFS; IFS='~'
1124     for cmd in $1; do
1125       IFS=$save_ifs
1126       eval cmd=\"$cmd\"
1127       func_show_eval "$cmd" "${2-:}"
1128     done
1129     IFS=$save_ifs
1130 }
1131
1132
1133 # func_source file
1134 # Source FILE, adding directory component if necessary.
1135 # Note that it is not necessary on cygwin/mingw to append a dot to
1136 # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
1137 # behavior happens only for exec(3), not for open(2)!  Also, sourcing
1138 # `FILE.' does not work on cygwin managed mounts.
1139 func_source ()
1140 {
1141     $opt_debug
1142     case $1 in
1143     */* | *\\*) . "$1" ;;
1144     *)          . "./$1" ;;
1145     esac
1146 }
1147
1148
1149 # func_infer_tag arg
1150 # Infer tagged configuration to use if any are available and
1151 # if one wasn't chosen via the "--tag" command line option.
1152 # Only attempt this if the compiler in the base compile
1153 # command doesn't match the default compiler.
1154 # arg is usually of the form 'gcc ...'
1155 func_infer_tag ()
1156 {
1157     $opt_debug
1158     if test -n "$available_tags" && test -z "$tagname"; then
1159       CC_quoted=
1160       for arg in $CC; do
1161         func_quote_for_eval "$arg"
1162         CC_quoted="$CC_quoted $func_quote_for_eval_result"
1163       done
1164       case $@ in
1165       # Blanks in the command may have been stripped by the calling shell,
1166       # but not from the CC environment variable when configure was run.
1167       " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
1168       # Blanks at the start of $base_compile will cause this to fail
1169       # if we don't check for them as well.
1170       *)
1171         for z in $available_tags; do
1172           if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
1173             # Evaluate the configuration.
1174             eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
1175             CC_quoted=
1176             for arg in $CC; do
1177               # Double-quote args containing other shell metacharacters.
1178               func_quote_for_eval "$arg"
1179               CC_quoted="$CC_quoted $func_quote_for_eval_result"
1180             done
1181             case "$@ " in
1182               " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
1183               # The compiler in the base compile command matches
1184               # the one in the tagged configuration.
1185               # Assume this is the tagged configuration we want.
1186               tagname=$z
1187               break
1188               ;;
1189             esac
1190           fi
1191         done
1192         # If $tagname still isn't set, then no tagged configuration
1193         # was found and let the user know that the "--tag" command
1194         # line option must be used.
1195         if test -z "$tagname"; then
1196           func_echo "unable to infer tagged configuration"
1197           func_fatal_error "specify a tag with \`--tag'"
1198 #       else
1199 #         func_verbose "using $tagname tagged configuration"
1200         fi
1201         ;;
1202       esac
1203     fi
1204 }
1205
1206
1207
1208 # func_write_libtool_object output_name pic_name nonpic_name
1209 # Create a libtool object file (analogous to a ".la" file),
1210 # but don't create it if we're doing a dry run.
1211 func_write_libtool_object ()
1212 {
1213     write_libobj=${1}
1214     if test "$build_libtool_libs" = yes; then
1215       write_lobj=\'${2}\'
1216     else
1217       write_lobj=none
1218     fi
1219
1220     if test "$build_old_libs" = yes; then
1221       write_oldobj=\'${3}\'
1222     else
1223       write_oldobj=none
1224     fi
1225
1226     $opt_dry_run || {
1227       cat >${write_libobj}T <<EOF
1228 # $write_libobj - a libtool object file
1229 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
1230 #
1231 # Please DO NOT delete this file!
1232 # It is necessary for linking the library.
1233
1234 # Name of the PIC object.
1235 pic_object=$write_lobj
1236
1237 # Name of the non-PIC object
1238 non_pic_object=$write_oldobj
1239
1240 EOF
1241       $MV "${write_libobj}T" "${write_libobj}"
1242     }
1243 }
1244
1245 # func_mode_compile arg...
1246 func_mode_compile ()
1247 {
1248     $opt_debug
1249     # Get the compilation command and the source file.
1250     base_compile=
1251     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
1252     suppress_opt=yes
1253     suppress_output=
1254     arg_mode=normal
1255     libobj=
1256     later=
1257     pie_flag=
1258
1259     for arg
1260     do
1261       case $arg_mode in
1262       arg  )
1263         # do not "continue".  Instead, add this to base_compile
1264         lastarg="$arg"
1265         arg_mode=normal
1266         ;;
1267
1268       target )
1269         libobj="$arg"
1270         arg_mode=normal
1271         continue
1272         ;;
1273
1274       normal )
1275         # Accept any command-line options.
1276         case $arg in
1277         -o)
1278           test -n "$libobj" && \
1279             func_fatal_error "you cannot specify \`-o' more than once"
1280           arg_mode=target
1281           continue
1282           ;;
1283
1284         -pie | -fpie | -fPIE)
1285           pie_flag="$pie_flag $arg"
1286           continue
1287           ;;
1288
1289         -shared | -static | -prefer-pic | -prefer-non-pic)
1290           later="$later $arg"
1291           continue
1292           ;;
1293
1294         -no-suppress)
1295           suppress_opt=no
1296           continue
1297           ;;
1298
1299         -Xcompiler)
1300           arg_mode=arg  #  the next one goes into the "base_compile" arg list
1301           continue      #  The current "srcfile" will either be retained or
1302           ;;            #  replaced later.  I would guess that would be a bug.
1303
1304         -Wc,*)
1305           func_stripname '-Wc,' '' "$arg"
1306           args=$func_stripname_result
1307           lastarg=
1308           save_ifs="$IFS"; IFS=','
1309           for arg in $args; do
1310             IFS="$save_ifs"
1311             func_quote_for_eval "$arg"
1312             lastarg="$lastarg $func_quote_for_eval_result"
1313           done
1314           IFS="$save_ifs"
1315           func_stripname ' ' '' "$lastarg"
1316           lastarg=$func_stripname_result
1317
1318           # Add the arguments to base_compile.
1319           base_compile="$base_compile $lastarg"
1320           continue
1321           ;;
1322
1323         *)
1324           # Accept the current argument as the source file.
1325           # The previous "srcfile" becomes the current argument.
1326           #
1327           lastarg="$srcfile"
1328           srcfile="$arg"
1329           ;;
1330         esac  #  case $arg
1331         ;;
1332       esac    #  case $arg_mode
1333
1334       # Aesthetically quote the previous argument.
1335       func_quote_for_eval "$lastarg"
1336       base_compile="$base_compile $func_quote_for_eval_result"
1337     done # for arg
1338
1339     case $arg_mode in
1340     arg)
1341       func_fatal_error "you must specify an argument for -Xcompile"
1342       ;;
1343     target)
1344       func_fatal_error "you must specify a target with \`-o'"
1345       ;;
1346     *)
1347       # Get the name of the library object.
1348       test -z "$libobj" && {
1349         func_basename "$srcfile"
1350         libobj="$func_basename_result"
1351       }
1352       ;;
1353     esac
1354
1355     # Recognize several different file suffixes.
1356     # If the user specifies -o file.o, it is replaced with file.lo
1357     case $libobj in
1358     *.[cCFSifmso] | \
1359     *.ada | *.adb | *.ads | *.asm | \
1360     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
1361     *.[fF][09]? | *.for | *.java | *.obj | *.sx)
1362       func_xform "$libobj"
1363       libobj=$func_xform_result
1364       ;;
1365     esac
1366
1367     case $libobj in
1368     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
1369     *)
1370       func_fatal_error "cannot determine name of library object from \`$libobj'"
1371       ;;
1372     esac
1373
1374     func_infer_tag $base_compile
1375
1376     for arg in $later; do
1377       case $arg in
1378       -shared)
1379         test "$build_libtool_libs" != yes && \
1380           func_fatal_configuration "can not build a shared library"
1381         build_old_libs=no
1382         continue
1383         ;;
1384
1385       -static)
1386         build_libtool_libs=no
1387         build_old_libs=yes
1388         continue
1389         ;;
1390
1391       -prefer-pic)
1392         pic_mode=yes
1393         continue
1394         ;;
1395
1396       -prefer-non-pic)
1397         pic_mode=no
1398         continue
1399         ;;
1400       esac
1401     done
1402
1403     func_quote_for_eval "$libobj"
1404     test "X$libobj" != "X$func_quote_for_eval_result" \
1405       && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'    &()|`$[]' \
1406       && func_warning "libobj name \`$libobj' may not contain shell special characters."
1407     func_dirname_and_basename "$obj" "/" ""
1408     objname="$func_basename_result"
1409     xdir="$func_dirname_result"
1410     lobj=${xdir}$objdir/$objname
1411
1412     test -z "$base_compile" && \
1413       func_fatal_help "you must specify a compilation command"
1414
1415     # Delete any leftover library objects.
1416     if test "$build_old_libs" = yes; then
1417       removelist="$obj $lobj $libobj ${libobj}T"
1418     else
1419       removelist="$lobj $libobj ${libobj}T"
1420     fi
1421
1422     # On Cygwin there's no "real" PIC flag so we must build both object types
1423     case $host_os in
1424     cygwin* | mingw* | pw32* | os2* | cegcc*)
1425       pic_mode=default
1426       ;;
1427     esac
1428     if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
1429       # non-PIC code in shared libraries is not supported
1430       pic_mode=default
1431     fi
1432
1433     # Calculate the filename of the output object if compiler does
1434     # not support -o with -c
1435     if test "$compiler_c_o" = no; then
1436       output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
1437       lockfile="$output_obj.lock"
1438     else
1439       output_obj=
1440       need_locks=no
1441       lockfile=
1442     fi
1443
1444     # Lock this critical section if it is needed
1445     # We use this script file to make the link, it avoids creating a new file
1446     if test "$need_locks" = yes; then
1447       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
1448         func_echo "Waiting for $lockfile to be removed"
1449         sleep 2
1450       done
1451     elif test "$need_locks" = warn; then
1452       if test -f "$lockfile"; then
1453         $ECHO "\
1454 *** ERROR, $lockfile exists and contains:
1455 `cat $lockfile 2>/dev/null`
1456
1457 This indicates that another process is trying to use the same
1458 temporary object file, and libtool could not work around it because
1459 your compiler does not support \`-c' and \`-o' together.  If you
1460 repeat this compilation, it may succeed, by chance, but you had better
1461 avoid parallel builds (make -j) in this platform, or get a better
1462 compiler."
1463
1464         $opt_dry_run || $RM $removelist
1465         exit $EXIT_FAILURE
1466       fi
1467       removelist="$removelist $output_obj"
1468       $ECHO "$srcfile" > "$lockfile"
1469     fi
1470
1471     $opt_dry_run || $RM $removelist
1472     removelist="$removelist $lockfile"
1473     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
1474
1475     if test -n "$fix_srcfile_path"; then
1476       eval srcfile=\"$fix_srcfile_path\"
1477     fi
1478     func_quote_for_eval "$srcfile"
1479     qsrcfile=$func_quote_for_eval_result
1480
1481     # Only build a PIC object if we are building libtool libraries.
1482     if test "$build_libtool_libs" = yes; then
1483       # Without this assignment, base_compile gets emptied.
1484       fbsd_hideous_sh_bug=$base_compile
1485
1486       if test "$pic_mode" != no; then
1487         command="$base_compile $qsrcfile $pic_flag"
1488       else
1489         # Don't build PIC code
1490         command="$base_compile $qsrcfile"
1491       fi
1492
1493       func_mkdir_p "$xdir$objdir"
1494
1495       if test -z "$output_obj"; then
1496         # Place PIC objects in $objdir
1497         command="$command -o $lobj"
1498       fi
1499
1500       func_show_eval_locale "$command"  \
1501           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
1502
1503       if test "$need_locks" = warn &&
1504          test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
1505         $ECHO "\
1506 *** ERROR, $lockfile contains:
1507 `cat $lockfile 2>/dev/null`
1508
1509 but it should contain:
1510 $srcfile
1511
1512 This indicates that another process is trying to use the same
1513 temporary object file, and libtool could not work around it because
1514 your compiler does not support \`-c' and \`-o' together.  If you
1515 repeat this compilation, it may succeed, by chance, but you had better
1516 avoid parallel builds (make -j) in this platform, or get a better
1517 compiler."
1518
1519         $opt_dry_run || $RM $removelist
1520         exit $EXIT_FAILURE
1521       fi
1522
1523       # Just move the object if needed, then go on to compile the next one
1524       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
1525         func_show_eval '$MV "$output_obj" "$lobj"' \
1526           'error=$?; $opt_dry_run || $RM $removelist; exit $error'
1527       fi
1528
1529       # Allow error messages only from the first compilation.
1530       if test "$suppress_opt" = yes; then
1531         suppress_output=' >/dev/null 2>&1'
1532       fi
1533     fi
1534
1535     # Only build a position-dependent object if we build old libraries.
1536     if test "$build_old_libs" = yes; then
1537       if test "$pic_mode" != yes; then
1538         # Don't build PIC code
1539         command="$base_compile $qsrcfile$pie_flag"
1540       else
1541         command="$base_compile $qsrcfile $pic_flag"
1542       fi
1543       if test "$compiler_c_o" = yes; then
1544         command="$command -o $obj"
1545       fi
1546
1547       # Suppress compiler output if we already did a PIC compilation.
1548       command="$command$suppress_output"
1549       func_show_eval_locale "$command" \
1550         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
1551
1552       if test "$need_locks" = warn &&
1553          test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
1554         $ECHO "\
1555 *** ERROR, $lockfile contains:
1556 `cat $lockfile 2>/dev/null`
1557
1558 but it should contain:
1559 $srcfile
1560
1561 This indicates that another process is trying to use the same
1562 temporary object file, and libtool could not work around it because
1563 your compiler does not support \`-c' and \`-o' together.  If you
1564 repeat this compilation, it may succeed, by chance, but you had better
1565 avoid parallel builds (make -j) in this platform, or get a better
1566 compiler."
1567
1568         $opt_dry_run || $RM $removelist
1569         exit $EXIT_FAILURE
1570       fi
1571
1572       # Just move the object if needed
1573       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
1574         func_show_eval '$MV "$output_obj" "$obj"' \
1575           'error=$?; $opt_dry_run || $RM $removelist; exit $error'
1576       fi
1577     fi
1578
1579     $opt_dry_run || {
1580       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
1581
1582       # Unlock the critical section if it was locked
1583       if test "$need_locks" != no; then
1584         removelist=$lockfile
1585         $RM "$lockfile"
1586       fi
1587     }
1588
1589     exit $EXIT_SUCCESS
1590 }
1591
1592 $opt_help || {
1593 test "$mode" = compile && func_mode_compile ${1+"$@"}
1594 }
1595
1596 func_mode_help ()
1597 {
1598     # We need to display help for each of the modes.
1599     case $mode in
1600       "")
1601         # Generic help is extracted from the usage comments
1602         # at the start of this file.
1603         func_help
1604         ;;
1605
1606       clean)
1607         $ECHO \
1608 "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
1609
1610 Remove files from the build directory.
1611
1612 RM is the name of the program to use to delete files associated with each FILE
1613 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
1614 to RM.
1615
1616 If FILE is a libtool library, object or program, all the files associated
1617 with it are deleted. Otherwise, only FILE itself is deleted using RM."
1618         ;;
1619
1620       compile)
1621       $ECHO \
1622 "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
1623
1624 Compile a source file into a libtool library object.
1625
1626 This mode accepts the following additional options:
1627
1628   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
1629   -no-suppress      do not suppress compiler output for multiple passes
1630   -prefer-pic       try to building PIC objects only
1631   -prefer-non-pic   try to building non-PIC objects only
1632   -shared           do not build a \`.o' file suitable for static linking
1633   -static           only build a \`.o' file suitable for static linking
1634
1635 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
1636 from the given SOURCEFILE.
1637
1638 The output file name is determined by removing the directory component from
1639 SOURCEFILE, then substituting the C source code suffix \`.c' with the
1640 library object suffix, \`.lo'."
1641         ;;
1642
1643       execute)
1644         $ECHO \
1645 "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
1646
1647 Automatically set library path, then run a program.
1648
1649 This mode accepts the following additional options:
1650
1651   -dlopen FILE      add the directory containing FILE to the library path
1652
1653 This mode sets the library path environment variable according to \`-dlopen'
1654 flags.
1655
1656 If any of the ARGS are libtool executable wrappers, then they are translated
1657 into their corresponding uninstalled binary, and any of their required library
1658 directories are added to the library path.
1659
1660 Then, COMMAND is executed, with ARGS as arguments."
1661         ;;
1662
1663       finish)
1664         $ECHO \
1665 "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
1666
1667 Complete the installation of libtool libraries.
1668
1669 Each LIBDIR is a directory that contains libtool libraries.
1670
1671 The commands that this mode executes may require superuser privileges.  Use
1672 the \`--dry-run' option if you just want to see what would be executed."
1673         ;;
1674
1675       install)
1676         $ECHO \
1677 "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
1678
1679 Install executables or libraries.
1680
1681 INSTALL-COMMAND is the installation command.  The first component should be
1682 either the \`install' or \`cp' program.
1683
1684 The following components of INSTALL-COMMAND are treated specially:
1685
1686   -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
1687
1688 The rest of the components are interpreted as arguments to that command (only
1689 BSD-compatible install options are recognized)."
1690         ;;
1691
1692       link)
1693         $ECHO \
1694 "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
1695
1696 Link object files or libraries together to form another library, or to
1697 create an executable program.
1698
1699 LINK-COMMAND is a command using the C compiler that you would use to create
1700 a program from several object files.
1701
1702 The following components of LINK-COMMAND are treated specially:
1703
1704   -all-static       do not do any dynamic linking at all
1705   -avoid-version    do not add a version suffix if possible
1706   -bindir BINDIR    specify path to binaries directory (for systems where
1707                     libraries must be found in the PATH setting at runtime)
1708   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
1709   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
1710   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
1711   -export-symbols SYMFILE
1712                     try to export only the symbols listed in SYMFILE
1713   -export-symbols-regex REGEX
1714                     try to export only the symbols matching REGEX
1715   -LLIBDIR          search LIBDIR for required installed libraries
1716   -lNAME            OUTPUT-FILE requires the installed library libNAME
1717   -module           build a library that can dlopened
1718   -no-fast-install  disable the fast-install mode
1719   -no-install       link a not-installable executable
1720   -no-undefined     declare that a library does not refer to external symbols
1721   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
1722   -objectlist FILE  Use a list of object files found in FILE to specify objects
1723   -precious-files-regex REGEX
1724                     don't remove output files matching REGEX
1725   -release RELEASE  specify package release information
1726   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
1727   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
1728   -shared           only do dynamic linking of libtool libraries
1729   -shrext SUFFIX    override the standard shared library file extension
1730   -static           do not do any dynamic linking of uninstalled libtool libraries
1731   -static-libtool-libs
1732                     do not do any dynamic linking of libtool libraries
1733   -version-info CURRENT[:REVISION[:AGE]]
1734                     specify library version info [each variable defaults to 0]
1735   -weak LIBNAME     declare that the target provides the LIBNAME interface
1736
1737 All other options (arguments beginning with \`-') are ignored.
1738
1739 Every other argument is treated as a filename.  Files ending in \`.la' are
1740 treated as uninstalled libtool libraries, other files are standard or library
1741 object files.
1742
1743 If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
1744 only library objects (\`.lo' files) may be specified, and \`-rpath' is
1745 required, except when creating a convenience library.
1746
1747 If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
1748 using \`ar' and \`ranlib', or on Windows using \`lib'.
1749
1750 If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
1751 is created, otherwise an executable program is created."
1752         ;;
1753
1754       uninstall)
1755         $ECHO \
1756 "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
1757
1758 Remove libraries from an installation directory.
1759
1760 RM is the name of the program to use to delete files associated with each FILE
1761 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
1762 to RM.
1763
1764 If FILE is a libtool library, all the files associated with it are deleted.
1765 Otherwise, only FILE itself is deleted using RM."
1766         ;;
1767
1768       *)
1769         func_fatal_help "invalid operation mode \`$mode'"
1770         ;;
1771     esac
1772
1773     $ECHO
1774     $ECHO "Try \`$progname --help' for more information about other modes."
1775
1776     exit $?
1777 }
1778
1779   # Now that we've collected a possible --mode arg, show help if necessary
1780   $opt_help && func_mode_help
1781
1782
1783 # func_mode_execute arg...
1784 func_mode_execute ()
1785 {
1786     $opt_debug
1787     # The first argument is the command name.
1788     cmd="$nonopt"
1789     test -z "$cmd" && \
1790       func_fatal_help "you must specify a COMMAND"
1791
1792     # Handle -dlopen flags immediately.
1793     for file in $execute_dlfiles; do
1794       test -f "$file" \
1795         || func_fatal_help "\`$file' is not a file"
1796
1797       dir=
1798       case $file in
1799       *.la)
1800         # Check to see that this really is a libtool archive.
1801         func_lalib_unsafe_p "$file" \
1802           || func_fatal_help "\`$lib' is not a valid libtool archive"
1803
1804         # Read the libtool library.
1805         dlname=
1806         library_names=
1807         func_source "$file"
1808
1809         # Skip this library if it cannot be dlopened.
1810         if test -z "$dlname"; then
1811           # Warn if it was a shared library.
1812           test -n "$library_names" && \
1813             func_warning "\`$file' was not linked with \`-export-dynamic'"
1814           continue
1815         fi
1816
1817         func_dirname "$file" "" "."
1818         dir="$func_dirname_result"
1819
1820         if test -f "$dir/$objdir/$dlname"; then
1821           dir="$dir/$objdir"
1822         else
1823           if test ! -f "$dir/$dlname"; then
1824             func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
1825           fi
1826         fi
1827         ;;
1828
1829       *.lo)
1830         # Just add the directory containing the .lo file.
1831         func_dirname "$file" "" "."
1832         dir="$func_dirname_result"
1833         ;;
1834
1835       *)
1836         func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
1837         continue
1838         ;;
1839       esac
1840
1841       # Get the absolute pathname.
1842       absdir=`cd "$dir" && pwd`
1843       test -n "$absdir" && dir="$absdir"
1844
1845       # Now add the directory to shlibpath_var.
1846       if eval "test -z \"\$$shlibpath_var\""; then
1847         eval "$shlibpath_var=\"\$dir\""
1848       else
1849         eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
1850       fi
1851     done
1852
1853     # This variable tells wrapper scripts just to set shlibpath_var
1854     # rather than running their programs.
1855     libtool_execute_magic="$magic"
1856
1857     # Check if any of the arguments is a wrapper script.
1858     args=
1859     for file
1860     do
1861       case $file in
1862       -*) ;;
1863       *)
1864         # Do a test to see if this is really a libtool program.
1865         if func_ltwrapper_script_p "$file"; then
1866           func_source "$file"
1867           # Transform arg to wrapped name.
1868           file="$progdir/$program"
1869         elif func_ltwrapper_executable_p "$file"; then
1870           func_ltwrapper_scriptname "$file"
1871           func_source "$func_ltwrapper_scriptname_result"
1872           # Transform arg to wrapped name.
1873           file="$progdir/$program"
1874         fi
1875         ;;
1876       esac
1877       # Quote arguments (to preserve shell metacharacters).
1878       func_quote_for_eval "$file"
1879       args="$args $func_quote_for_eval_result"
1880     done
1881
1882     if test "X$opt_dry_run" = Xfalse; then
1883       if test -n "$shlibpath_var"; then
1884         # Export the shlibpath_var.
1885         eval "export $shlibpath_var"
1886       fi
1887
1888       # Restore saved environment variables
1889       for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
1890       do
1891         eval "if test \"\${save_$lt_var+set}\" = set; then
1892                 $lt_var=\$save_$lt_var; export $lt_var
1893               else
1894                 $lt_unset $lt_var
1895               fi"
1896       done
1897
1898       # Now prepare to actually exec the command.
1899       exec_cmd="\$cmd$args"
1900     else
1901       # Display what would be done.
1902       if test -n "$shlibpath_var"; then
1903         eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
1904         $ECHO "export $shlibpath_var"
1905       fi
1906       $ECHO "$cmd$args"
1907       exit $EXIT_SUCCESS
1908     fi
1909 }
1910
1911 test "$mode" = execute && func_mode_execute ${1+"$@"}
1912
1913
1914 # func_mode_finish arg...
1915 func_mode_finish ()
1916 {
1917     $opt_debug
1918     libdirs="$nonopt"
1919     admincmds=
1920
1921     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
1922       for dir
1923       do
1924         libdirs="$libdirs $dir"
1925       done
1926
1927       for libdir in $libdirs; do
1928         if test -n "$finish_cmds"; then
1929           # Do each command in the finish commands.
1930           func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
1931 '"$cmd"'"'
1932         fi
1933         if test -n "$finish_eval"; then
1934           # Do the single finish_eval.
1935           eval cmds=\"$finish_eval\"
1936           $opt_dry_run || eval "$cmds" || admincmds="$admincmds
1937        $cmds"
1938         fi
1939       done
1940     fi
1941
1942     # Exit here if they wanted silent mode.
1943     $opt_silent && exit $EXIT_SUCCESS
1944
1945     $ECHO "X----------------------------------------------------------------------" | $Xsed
1946     $ECHO "Libraries have been installed in:"
1947     for libdir in $libdirs; do
1948       $ECHO "   $libdir"
1949     done
1950     $ECHO
1951     $ECHO "If you ever happen to want to link against installed libraries"
1952     $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
1953     $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
1954     $ECHO "flag during linking and do at least one of the following:"
1955     if test -n "$shlibpath_var"; then
1956       $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
1957       $ECHO "     during execution"
1958     fi
1959     if test -n "$runpath_var"; then
1960       $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
1961       $ECHO "     during linking"
1962     fi
1963     if test -n "$hardcode_libdir_flag_spec"; then
1964       libdir=LIBDIR
1965       eval flag=\"$hardcode_libdir_flag_spec\"
1966
1967       $ECHO "   - use the \`$flag' linker flag"
1968     fi
1969     if test -n "$admincmds"; then
1970       $ECHO "   - have your system administrator run these commands:$admincmds"
1971     fi
1972     if test -f /etc/ld.so.conf; then
1973       $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
1974     fi
1975     $ECHO
1976
1977     $ECHO "See any operating system documentation about shared libraries for"
1978     case $host in
1979       solaris2.[6789]|solaris2.1[0-9])
1980         $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
1981         $ECHO "pages."
1982         ;;
1983       *)
1984         $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
1985         ;;
1986     esac
1987     $ECHO "X----------------------------------------------------------------------" | $Xsed
1988     exit $EXIT_SUCCESS
1989 }
1990
1991 test "$mode" = finish && func_mode_finish ${1+"$@"}
1992
1993
1994 # func_mode_install arg...
1995 func_mode_install ()
1996 {
1997     $opt_debug
1998     # There may be an optional sh(1) argument at the beginning of
1999     # install_prog (especially on Windows NT).
2000     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
2001        # Allow the use of GNU shtool's install command.
2002        $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
2003       # Aesthetically quote it.
2004       func_quote_for_eval "$nonopt"
2005       install_prog="$func_quote_for_eval_result "
2006       arg=$1
2007       shift
2008     else
2009       install_prog=
2010       arg=$nonopt
2011     fi
2012
2013     # The real first argument should be the name of the installation program.
2014     # Aesthetically quote it.
2015     func_quote_for_eval "$arg"
2016     install_prog="$install_prog$func_quote_for_eval_result"
2017
2018     # We need to accept at least all the BSD install flags.
2019     dest=
2020     files=
2021     opts=
2022     prev=
2023     install_type=
2024     isdir=no
2025     stripme=
2026     for arg
2027     do
2028       if test -n "$dest"; then
2029         files="$files $dest"
2030         dest=$arg
2031         continue
2032       fi
2033
2034       case $arg in
2035       -d) isdir=yes ;;
2036       -f)
2037         case " $install_prog " in
2038         *[\\\ /]cp\ *) ;;
2039         *) prev=$arg ;;
2040         esac
2041         ;;
2042       -g | -m | -o)
2043         prev=$arg
2044         ;;
2045       -s)
2046         stripme=" -s"
2047         continue
2048         ;;
2049       -*)
2050         ;;
2051       *)
2052         # If the previous option needed an argument, then skip it.
2053         if test -n "$prev"; then
2054           prev=
2055         else
2056           dest=$arg
2057           continue
2058         fi
2059         ;;
2060       esac
2061
2062       # Aesthetically quote the argument.
2063       func_quote_for_eval "$arg"
2064       install_prog="$install_prog $func_quote_for_eval_result"
2065     done
2066
2067     test -z "$install_prog" && \
2068       func_fatal_help "you must specify an install program"
2069
2070     test -n "$prev" && \
2071       func_fatal_help "the \`$prev' option requires an argument"
2072
2073     if test -z "$files"; then
2074       if test -z "$dest"; then
2075         func_fatal_help "no file or destination specified"
2076       else
2077         func_fatal_help "you must specify a destination"
2078       fi
2079     fi
2080
2081     # Strip any trailing slash from the destination.
2082     func_stripname '' '/' "$dest"
2083     dest=$func_stripname_result
2084
2085     # Check to see that the destination is a directory.
2086     test -d "$dest" && isdir=yes
2087     if test "$isdir" = yes; then
2088       destdir="$dest"
2089       destname=
2090     else
2091       func_dirname_and_basename "$dest" "" "."
2092       destdir="$func_dirname_result"
2093       destname="$func_basename_result"
2094
2095       # Not a directory, so check to see that there is only one file specified.
2096       set dummy $files; shift
2097       test "$#" -gt 1 && \
2098         func_fatal_help "\`$dest' is not a directory"
2099     fi
2100     case $destdir in
2101     [\\/]* | [A-Za-z]:[\\/]*) ;;
2102     *)
2103       for file in $files; do
2104         case $file in
2105         *.lo) ;;
2106         *)
2107           func_fatal_help "\`$destdir' must be an absolute directory name"
2108           ;;
2109         esac
2110       done
2111       ;;
2112     esac
2113
2114     # This variable tells wrapper scripts just to set variables rather
2115     # than running their programs.
2116     libtool_install_magic="$magic"
2117
2118     staticlibs=
2119     future_libdirs=
2120     current_libdirs=
2121     for file in $files; do
2122
2123       # Do each installation.
2124       case $file in
2125       *.$libext)
2126         # Do the static libraries later.
2127         staticlibs="$staticlibs $file"
2128         ;;
2129
2130       *.la)
2131         # Check to see that this really is a libtool archive.
2132         func_lalib_unsafe_p "$file" \
2133           || func_fatal_help "\`$file' is not a valid libtool archive"
2134
2135         library_names=
2136         old_library=
2137         relink_command=
2138         func_source "$file"
2139
2140         # Add the libdir to current_libdirs if it is the destination.
2141         if test "X$destdir" = "X$libdir"; then
2142           case "$current_libdirs " in
2143           *" $libdir "*) ;;
2144           *) current_libdirs="$current_libdirs $libdir" ;;
2145           esac
2146         else
2147           # Note the libdir as a future libdir.
2148           case "$future_libdirs " in
2149           *" $libdir "*) ;;
2150           *) future_libdirs="$future_libdirs $libdir" ;;
2151           esac
2152         fi
2153
2154         func_dirname "$file" "/" ""
2155         dir="$func_dirname_result"
2156         dir="$dir$objdir"
2157
2158         if test -n "$relink_command"; then
2159           # Determine the prefix the user has applied to our future dir.
2160           inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
2161
2162           # Don't allow the user to place us outside of our expected
2163           # location b/c this prevents finding dependent libraries that
2164           # are installed to the same prefix.
2165           # At present, this check doesn't affect windows .dll's that
2166           # are installed into $libdir/../bin (currently, that works fine)
2167           # but it's something to keep an eye on.
2168           test "$inst_prefix_dir" = "$destdir" && \
2169             func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
2170
2171           if test -n "$inst_prefix_dir"; then
2172             # Stick the inst_prefix_dir data into the link command.
2173             relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
2174           else
2175             relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
2176           fi
2177
2178           func_warning "relinking \`$file'"
2179           func_show_eval "$relink_command" \
2180             'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
2181         fi
2182
2183         # See the names of the shared library.
2184         set dummy $library_names; shift
2185         if test -n "$1"; then
2186           realname="$1"
2187           shift
2188
2189           srcname="$realname"
2190           test -n "$relink_command" && srcname="$realname"T
2191
2192           # Install the shared library and build the symlinks.
2193           func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
2194               'exit $?'
2195           tstripme="$stripme"
2196           case $host_os in
2197           cygwin* | mingw* | pw32* | cegcc*)
2198             case $realname in
2199             *.dll.a)
2200               tstripme=""
2201               ;;
2202             esac
2203             ;;
2204           esac
2205           if test -n "$tstripme" && test -n "$striplib"; then
2206             func_show_eval "$striplib $destdir/$realname" 'exit $?'
2207           fi
2208
2209           if test "$#" -gt 0; then
2210             # Delete the old symlinks, and create new ones.
2211             # Try `ln -sf' first, because the `ln' binary might depend on
2212             # the symlink we replace!  Solaris /bin/ln does not understand -f,
2213             # so we also need to try rm && ln -s.
2214             for linkname
2215             do
2216               test "$linkname" != "$realname" \
2217                 && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
2218             done
2219           fi
2220
2221           # Do each command in the postinstall commands.
2222           lib="$destdir/$realname"
2223           func_execute_cmds "$postinstall_cmds" 'exit $?'
2224         fi
2225
2226         # Install the pseudo-library for information purposes.
2227         func_basename "$file"
2228         name="$func_basename_result"
2229         instname="$dir/$name"i
2230         func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
2231
2232         # Maybe install the static library, too.
2233         test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
2234         ;;
2235
2236       *.lo)
2237         # Install (i.e. copy) a libtool object.
2238
2239         # Figure out destination file name, if it wasn't already specified.
2240         if test -n "$destname"; then
2241           destfile="$destdir/$destname"
2242         else
2243           func_basename "$file"
2244           destfile="$func_basename_result"
2245           destfile="$destdir/$destfile"
2246         fi
2247
2248         # Deduce the name of the destination old-style object file.
2249         case $destfile in
2250         *.lo)
2251           func_lo2o "$destfile"
2252           staticdest=$func_lo2o_result
2253           ;;
2254         *.$objext)
2255           staticdest="$destfile"
2256           destfile=
2257           ;;
2258         *)
2259           func_fatal_help "cannot copy a libtool object to \`$destfile'"
2260           ;;
2261         esac
2262
2263         # Install the libtool object if requested.
2264         test -n "$destfile" && \
2265           func_show_eval "$install_prog $file $destfile" 'exit $?'
2266
2267         # Install the old object if enabled.
2268         if test "$build_old_libs" = yes; then
2269           # Deduce the name of the old-style object file.
2270           func_lo2o "$file"
2271           staticobj=$func_lo2o_result
2272           func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
2273         fi
2274         exit $EXIT_SUCCESS
2275         ;;
2276
2277       *)
2278         # Figure out destination file name, if it wasn't already specified.
2279         if test -n "$destname"; then
2280           destfile="$destdir/$destname"
2281         else
2282           func_basename "$file"
2283           destfile="$func_basename_result"
2284           destfile="$destdir/$destfile"
2285         fi
2286
2287         # If the file is missing, and there is a .exe on the end, strip it
2288         # because it is most likely a libtool script we actually want to
2289         # install
2290         stripped_ext=""
2291         case $file in
2292           *.exe)
2293             if test ! -f "$file"; then
2294               func_stripname '' '.exe' "$file"
2295               file=$func_stripname_result
2296               stripped_ext=".exe"
2297             fi
2298             ;;
2299         esac
2300
2301         # Do a test to see if this is really a libtool program.
2302         case $host in
2303         *cygwin* | *mingw*)
2304             if func_ltwrapper_executable_p "$file"; then
2305               func_ltwrapper_scriptname "$file"
2306               wrapper=$func_ltwrapper_scriptname_result
2307             else
2308               func_stripname '' '.exe' "$file"
2309               wrapper=$func_stripname_result
2310             fi
2311             ;;
2312         *)
2313             wrapper=$file
2314             ;;
2315         esac
2316         if func_ltwrapper_script_p "$wrapper"; then
2317           notinst_deplibs=
2318           relink_command=
2319
2320           func_source "$wrapper"
2321
2322           # Check the variables that should have been set.
2323           test -z "$generated_by_libtool_version" && \
2324             func_fatal_error "invalid libtool wrapper script \`$wrapper'"
2325
2326           finalize=yes
2327           for lib in $notinst_deplibs; do
2328             # Check to see that each library is installed.
2329             libdir=
2330             if test -f "$lib"; then
2331               func_source "$lib"
2332             fi
2333             libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
2334             if test -n "$libdir" && test ! -f "$libfile"; then
2335               func_warning "\`$lib' has not been installed in \`$libdir'"
2336               finalize=no
2337             fi
2338           done
2339
2340           relink_command=
2341           func_source "$wrapper"
2342
2343           outputname=
2344           if test "$fast_install" = no && test -n "$relink_command"; then
2345             $opt_dry_run || {
2346               if test "$finalize" = yes; then
2347                 tmpdir=`func_mktempdir`
2348                 func_basename "$file$stripped_ext"
2349                 file="$func_basename_result"
2350                 outputname="$tmpdir/$file"
2351                 # Replace the output file specification.
2352                 relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
2353
2354                 $opt_silent || {
2355                   func_quote_for_expand "$relink_command"
2356                   eval "func_echo $func_quote_for_expand_result"
2357                 }
2358                 if eval "$relink_command"; then :
2359                   else
2360                   func_error "error: relink \`$file' with the above command before installing it"
2361                   $opt_dry_run || ${RM}r "$tmpdir"
2362                   continue
2363                 fi
2364                 file="$outputname"
2365               else
2366                 func_warning "cannot relink \`$file'"
2367               fi
2368             }
2369           else
2370             # Install the binary that we compiled earlier.
2371             file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
2372           fi
2373         fi
2374
2375         # remove .exe since cygwin /usr/bin/install will append another
2376         # one anyway
2377         case $install_prog,$host in
2378         */usr/bin/install*,*cygwin*)
2379           case $file:$destfile in
2380           *.exe:*.exe)
2381             # this is ok
2382             ;;
2383           *.exe:*)
2384             destfile=$destfile.exe
2385             ;;
2386           *:*.exe)
2387             func_stripname '' '.exe' "$destfile"
2388             destfile=$func_stripname_result
2389             ;;
2390           esac
2391           ;;
2392         esac
2393         func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
2394         $opt_dry_run || if test -n "$outputname"; then
2395           ${RM}r "$tmpdir"
2396         fi
2397         ;;
2398       esac
2399     done
2400
2401     for file in $staticlibs; do
2402       func_basename "$file"
2403       name="$func_basename_result"
2404
2405       # Set up the ranlib parameters.
2406       oldlib="$destdir/$name"
2407
2408       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
2409
2410       if test -n "$stripme" && test -n "$old_striplib"; then
2411         func_show_eval "$old_striplib $oldlib" 'exit $?'
2412       fi
2413
2414       # Do each command in the postinstall commands.
2415       func_execute_cmds "$old_postinstall_cmds" 'exit $?'
2416     done
2417
2418     test -n "$future_libdirs" && \
2419       func_warning "remember to run \`$progname --finish$future_libdirs'"
2420
2421     if test -n "$current_libdirs"; then
2422       # Maybe just do a dry run.
2423       $opt_dry_run && current_libdirs=" -n$current_libdirs"
2424       exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
2425     else
2426       exit $EXIT_SUCCESS
2427     fi
2428 }
2429
2430 test "$mode" = install && func_mode_install ${1+"$@"}
2431
2432
2433 # func_generate_dlsyms outputname originator pic_p
2434 # Extract symbols from dlprefiles and create ${outputname}S.o with
2435 # a dlpreopen symbol table.
2436 func_generate_dlsyms ()
2437 {
2438     $opt_debug
2439     my_outputname="$1"
2440     my_originator="$2"
2441     my_pic_p="${3-no}"
2442     my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
2443     my_dlsyms=
2444
2445     if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
2446       if test -n "$NM" && test -n "$global_symbol_pipe"; then
2447         my_dlsyms="${my_outputname}S.c"
2448       else
2449         func_error "not configured to extract global symbols from dlpreopened files"
2450       fi
2451     fi
2452
2453     if test -n "$my_dlsyms"; then
2454       case $my_dlsyms in
2455       "") ;;
2456       *.c)
2457         # Discover the nlist of each of the dlfiles.
2458         nlist="$output_objdir/${my_outputname}.nm"
2459
2460         func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
2461
2462         # Parse the name list into a source file.
2463         func_verbose "creating $output_objdir/$my_dlsyms"
2464
2465         $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
2466 /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
2467 /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
2468
2469 #ifdef __cplusplus
2470 extern \"C\" {
2471 #endif
2472
2473 /* External symbol declarations for the compiler. */\
2474 "
2475
2476         if test "$dlself" = yes; then
2477           func_verbose "generating symbol list for \`$output'"
2478
2479           $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
2480
2481           # Add our own program objects to the symbol list.
2482           progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
2483           for progfile in $progfiles; do
2484             func_verbose "extracting global C symbols from \`$progfile'"
2485             $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
2486           done
2487
2488           if test -n "$exclude_expsyms"; then
2489             $opt_dry_run || {
2490               eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
2491               eval '$MV "$nlist"T "$nlist"'
2492             }
2493           fi
2494
2495           if test -n "$export_symbols_regex"; then
2496             $opt_dry_run || {
2497               eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
2498               eval '$MV "$nlist"T "$nlist"'
2499             }
2500           fi
2501
2502           # Prepare the list of exported symbols
2503           if test -z "$export_symbols"; then
2504             export_symbols="$output_objdir/$outputname.exp"
2505             $opt_dry_run || {
2506               $RM $export_symbols
2507               eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
2508               case $host in
2509               *cygwin* | *mingw* | *cegcc* )
2510                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
2511                 eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
2512                 ;;
2513               esac
2514             }
2515           else
2516             $opt_dry_run || {
2517               eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
2518               eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
2519               eval '$MV "$nlist"T "$nlist"'
2520               case $host in
2521                 *cygwin | *mingw* | *cegcc* )
2522                   eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
2523                   eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
2524                   ;;
2525               esac
2526             }
2527           fi
2528         fi
2529
2530         for dlprefile in $dlprefiles; do
2531           func_verbose "extracting global C symbols from \`$dlprefile'"
2532           func_basename "$dlprefile"
2533           name="$func_basename_result"
2534           $opt_dry_run || {
2535             eval '$ECHO ": $name " >> "$nlist"'
2536             eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
2537           }
2538         done
2539
2540         $opt_dry_run || {
2541           # Make sure we have at least an empty file.
2542           test -f "$nlist" || : > "$nlist"
2543
2544           if test -n "$exclude_expsyms"; then
2545             $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
2546             $MV "$nlist"T "$nlist"
2547           fi
2548
2549           # Try sorting and uniquifying the output.
2550           if $GREP -v "^: " < "$nlist" |
2551               if sort -k 3 </dev/null >/dev/null 2>&1; then
2552                 sort -k 3
2553               else
2554                 sort +2
2555               fi |
2556               uniq > "$nlist"S; then
2557             :
2558           else
2559             $GREP -v "^: " < "$nlist" > "$nlist"S
2560           fi
2561
2562           if test -f "$nlist"S; then
2563             eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
2564           else
2565             $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
2566           fi
2567
2568           $ECHO >> "$output_objdir/$my_dlsyms" "\
2569
2570 /* The mapping between symbol names and symbols.  */
2571 typedef struct {
2572   const char *name;
2573   void *address;
2574 } lt_dlsymlist;
2575 "
2576           case $host in
2577           *cygwin* | *mingw* | *cegcc* )
2578             $ECHO >> "$output_objdir/$my_dlsyms" "\
2579 /* DATA imports from DLLs on WIN32 con't be const, because
2580    runtime relocations are performed -- see ld's documentation
2581    on pseudo-relocs.  */"
2582             lt_dlsym_const= ;;
2583           *osf5*)
2584             echo >> "$output_objdir/$my_dlsyms" "\
2585 /* This system does not cope well with relocations in const data */"
2586             lt_dlsym_const= ;;
2587           *)
2588             lt_dlsym_const=const ;;
2589           esac
2590
2591           $ECHO >> "$output_objdir/$my_dlsyms" "\
2592 extern $lt_dlsym_const lt_dlsymlist
2593 lt_${my_prefix}_LTX_preloaded_symbols[];
2594 $lt_dlsym_const lt_dlsymlist
2595 lt_${my_prefix}_LTX_preloaded_symbols[] =
2596 {\
2597   { \"$my_originator\", (void *) 0 },"
2598
2599           case $need_lib_prefix in
2600           no)
2601             eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
2602             ;;
2603           *)
2604             eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
2605             ;;
2606           esac
2607           $ECHO >> "$output_objdir/$my_dlsyms" "\
2608   {0, (void *) 0}
2609 };
2610
2611 /* This works around a problem in FreeBSD linker */
2612 #ifdef FREEBSD_WORKAROUND
2613 static const void *lt_preloaded_setup() {
2614   return lt_${my_prefix}_LTX_preloaded_symbols;
2615 }
2616 #endif
2617
2618 #ifdef __cplusplus
2619 }
2620 #endif\
2621 "
2622         } # !$opt_dry_run
2623
2624         pic_flag_for_symtable=
2625         case "$compile_command " in
2626         *" -static "*) ;;
2627         *)
2628           case $host in
2629           # compiling the symbol table file with pic_flag works around
2630           # a FreeBSD bug that causes programs to crash when -lm is
2631           # linked before any other PIC object.  But we must not use
2632           # pic_flag when linking with -static.  The problem exists in
2633           # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
2634           *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
2635             pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
2636           *-*-hpux*)
2637             pic_flag_for_symtable=" $pic_flag"  ;;
2638           *)
2639             if test "X$my_pic_p" != Xno; then
2640               pic_flag_for_symtable=" $pic_flag"
2641             fi
2642             ;;
2643           esac
2644           ;;
2645         esac
2646         symtab_cflags=
2647         for arg in $LTCFLAGS; do
2648           case $arg in
2649           -pie | -fpie | -fPIE) ;;
2650           *) symtab_cflags="$symtab_cflags $arg" ;;
2651           esac
2652         done
2653
2654         # Now compile the dynamic symbol file.
2655         func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
2656
2657         # Clean up the generated files.
2658         func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
2659
2660         # Transform the symbol file into the correct name.
2661         symfileobj="$output_objdir/${my_outputname}S.$objext"
2662         case $host in
2663         *cygwin* | *mingw* | *cegcc* )
2664           if test -f "$output_objdir/$my_outputname.def"; then
2665             compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
2666             finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
2667           else
2668             compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
2669             finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
2670           fi
2671           ;;
2672         *)
2673           compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
2674           finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
2675           ;;
2676         esac
2677         ;;
2678       *)
2679         func_fatal_error "unknown suffix for \`$my_dlsyms'"
2680         ;;
2681       esac
2682     else
2683       # We keep going just in case the user didn't refer to
2684       # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
2685       # really was required.
2686
2687       # Nullify the symbol file.
2688       compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
2689       finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
2690     fi
2691 }
2692
2693 # func_win32_libid arg
2694 # return the library type of file 'arg'
2695 #
2696 # Need a lot of goo to handle *both* DLLs and import libs
2697 # Has to be a shell function in order to 'eat' the argument
2698 # that is supplied when $file_magic_command is called.
2699 func_win32_libid ()
2700 {
2701   $opt_debug
2702   win32_libid_type="unknown"
2703   win32_fileres=`file -L $1 2>/dev/null`
2704   case $win32_fileres in
2705   *ar\ archive\ import\ library*) # definitely import
2706     win32_libid_type="x86 archive import"
2707     ;;
2708   *ar\ archive*) # could be an import, or static
2709     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
2710        $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
2711       win32_nmres=`eval $NM -f posix -A $1 |
2712         $SED -n -e '
2713             1,100{
2714                 / I /{
2715                     s,.*,import,
2716                     p
2717                     q
2718                 }
2719             }'`
2720       case $win32_nmres in
2721       import*)  win32_libid_type="x86 archive import";;
2722       *)        win32_libid_type="x86 archive static";;
2723       esac
2724     fi
2725     ;;
2726   *DLL*)
2727     win32_libid_type="x86 DLL"
2728     ;;
2729   *executable*) # but shell scripts are "executable" too...
2730     case $win32_fileres in
2731     *MS\ Windows\ PE\ Intel*)
2732       win32_libid_type="x86 DLL"
2733       ;;
2734     esac
2735     ;;
2736   esac
2737   $ECHO "$win32_libid_type"
2738 }
2739
2740
2741
2742 # func_extract_an_archive dir oldlib
2743 func_extract_an_archive ()
2744 {
2745     $opt_debug
2746     f_ex_an_ar_dir="$1"; shift
2747     f_ex_an_ar_oldlib="$1"
2748     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
2749     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
2750      :
2751     else
2752       func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
2753     fi
2754 }
2755
2756
2757 # func_extract_archives gentop oldlib ...
2758 func_extract_archives ()
2759 {
2760     $opt_debug
2761     my_gentop="$1"; shift
2762     my_oldlibs=${1+"$@"}
2763     my_oldobjs=""
2764     my_xlib=""
2765     my_xabs=""
2766     my_xdir=""
2767
2768     for my_xlib in $my_oldlibs; do
2769       # Extract the objects.
2770       case $my_xlib in
2771         [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
2772         *) my_xabs=`pwd`"/$my_xlib" ;;
2773       esac
2774       func_basename "$my_xlib"
2775       my_xlib="$func_basename_result"
2776       my_xlib_u=$my_xlib
2777       while :; do
2778         case " $extracted_archives " in
2779         *" $my_xlib_u "*)
2780           func_arith $extracted_serial + 1
2781           extracted_serial=$func_arith_result
2782           my_xlib_u=lt$extracted_serial-$my_xlib ;;
2783         *) break ;;
2784         esac
2785       done
2786       extracted_archives="$extracted_archives $my_xlib_u"
2787       my_xdir="$my_gentop/$my_xlib_u"
2788
2789       func_mkdir_p "$my_xdir"
2790
2791       case $host in
2792       *-darwin*)
2793         func_verbose "Extracting $my_xabs"
2794         # Do not bother doing anything if just a dry run
2795         $opt_dry_run || {
2796           darwin_orig_dir=`pwd`
2797           cd $my_xdir || exit $?
2798           darwin_archive=$my_xabs
2799           darwin_curdir=`pwd`
2800           darwin_base_archive=`basename "$darwin_archive"`
2801           darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
2802           if test -n "$darwin_arches"; then
2803             darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
2804             darwin_arch=
2805             func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
2806             for darwin_arch in  $darwin_arches ; do
2807               func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
2808               $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
2809               cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
2810               func_extract_an_archive "`pwd`" "${darwin_base_archive}"
2811               cd "$darwin_curdir"
2812               $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
2813             done # $darwin_arches
2814             ## Okay now we've a bunch of thin objects, gotta fatten them up :)
2815             darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
2816             darwin_file=
2817             darwin_files=
2818             for darwin_file in $darwin_filelist; do
2819               darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
2820               $LIPO -create -output "$darwin_file" $darwin_files
2821             done # $darwin_filelist
2822             $RM -rf unfat-$$
2823             cd "$darwin_orig_dir"
2824           else
2825             cd $darwin_orig_dir
2826             func_extract_an_archive "$my_xdir" "$my_xabs"
2827           fi # $darwin_arches
2828         } # !$opt_dry_run
2829         ;;
2830       *)
2831         func_extract_an_archive "$my_xdir" "$my_xabs"
2832         ;;
2833       esac
2834       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
2835     done
2836
2837     func_extract_archives_result="$my_oldobjs"
2838 }
2839
2840
2841
2842 # func_emit_wrapper_part1 [arg=no]
2843 #
2844 # Emit the first part of a libtool wrapper script on stdout.
2845 # For more information, see the description associated with
2846 # func_emit_wrapper(), below.
2847 func_emit_wrapper_part1 ()
2848 {
2849         func_emit_wrapper_part1_arg1=no
2850         if test -n "$1" ; then
2851           func_emit_wrapper_part1_arg1=$1
2852         fi
2853
2854         $ECHO "\
2855 #! $SHELL
2856
2857 # $output - temporary wrapper script for $objdir/$outputname
2858 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
2859 #
2860 # The $output program cannot be directly executed until all the libtool
2861 # libraries that it depends on are installed.
2862 #
2863 # This wrapper script should never be moved out of the build directory.
2864 # If it is, it will not operate correctly.
2865
2866 # Sed substitution that helps us do robust quoting.  It backslashifies
2867 # metacharacters that are still active within double-quoted strings.
2868 Xsed='${SED} -e 1s/^X//'
2869 sed_quote_subst='$sed_quote_subst'
2870
2871 # Be Bourne compatible
2872 if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
2873   emulate sh
2874   NULLCMD=:
2875   # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
2876   # is contrary to our usage.  Disable this feature.
2877   alias -g '\${1+\"\$@\"}'='\"\$@\"'
2878   setopt NO_GLOB_SUBST
2879 else
2880   case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
2881 fi
2882 BIN_SH=xpg4; export BIN_SH # for Tru64
2883 DUALCASE=1; export DUALCASE # for MKS sh
2884
2885 # The HP-UX ksh and POSIX shell print the target directory to stdout
2886 # if CDPATH is set.
2887 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
2888
2889 relink_command=\"$relink_command\"
2890
2891 # This environment variable determines our operation mode.
2892 if test \"\$libtool_install_magic\" = \"$magic\"; then
2893   # install mode needs the following variables:
2894   generated_by_libtool_version='$macro_version'
2895   notinst_deplibs='$notinst_deplibs'
2896 else
2897   # When we are sourced in execute mode, \$file and \$ECHO are already set.
2898   if test \"\$libtool_execute_magic\" != \"$magic\"; then
2899     ECHO=\"$qecho\"
2900     file=\"\$0\"
2901     # Make sure echo works.
2902     if test \"X\$1\" = X--no-reexec; then
2903       # Discard the --no-reexec flag, and continue.
2904       shift
2905     elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
2906       # Yippee, \$ECHO works!
2907       :
2908     else
2909       # Restart under the correct shell, and then maybe \$ECHO will work.
2910       exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
2911     fi
2912   fi\
2913 "
2914         $ECHO "\
2915
2916   # Find the directory that this script lives in.
2917   thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
2918   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
2919
2920   # Follow symbolic links until we get to the real thisdir.
2921   file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
2922   while test -n \"\$file\"; do
2923     destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
2924
2925     # If there was a directory component, then change thisdir.
2926     if test \"x\$destdir\" != \"x\$file\"; then
2927       case \"\$destdir\" in
2928       [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
2929       *) thisdir=\"\$thisdir/\$destdir\" ;;
2930       esac
2931     fi
2932
2933     file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
2934     file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
2935   done
2936 "
2937 }
2938 # end: func_emit_wrapper_part1
2939
2940 # func_emit_wrapper_part2 [arg=no]
2941 #
2942 # Emit the second part of a libtool wrapper script on stdout.
2943 # For more information, see the description associated with
2944 # func_emit_wrapper(), below.
2945 func_emit_wrapper_part2 ()
2946 {
2947         func_emit_wrapper_part2_arg1=no
2948         if test -n "$1" ; then
2949           func_emit_wrapper_part2_arg1=$1
2950         fi
2951
2952         $ECHO "\
2953
2954   # Usually 'no', except on cygwin/mingw when embedded into
2955   # the cwrapper.
2956   WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
2957   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
2958     # special case for '.'
2959     if test \"\$thisdir\" = \".\"; then
2960       thisdir=\`pwd\`
2961     fi
2962     # remove .libs from thisdir
2963     case \"\$thisdir\" in
2964     *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
2965     $objdir )   thisdir=. ;;
2966     esac
2967   fi
2968
2969   # Try to get the absolute directory name.
2970   absdir=\`cd \"\$thisdir\" && pwd\`
2971   test -n \"\$absdir\" && thisdir=\"\$absdir\"
2972 "
2973
2974         if test "$fast_install" = yes; then
2975           $ECHO "\
2976   program=lt-'$outputname'$exeext
2977   progdir=\"\$thisdir/$objdir\"
2978
2979   if test ! -f \"\$progdir/\$program\" ||
2980      { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
2981        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
2982
2983     file=\"\$\$-\$program\"
2984
2985     if test ! -d \"\$progdir\"; then
2986       $MKDIR \"\$progdir\"
2987     else
2988       $RM \"\$progdir/\$file\"
2989     fi"
2990
2991           $ECHO "\
2992
2993     # relink executable if necessary
2994     if test -n \"\$relink_command\"; then
2995       if relink_command_output=\`eval \$relink_command 2>&1\`; then :
2996       else
2997         $ECHO \"\$relink_command_output\" >&2
2998         $RM \"\$progdir/\$file\"
2999         exit 1
3000       fi
3001     fi
3002
3003     $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
3004     { $RM \"\$progdir/\$program\";
3005       $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
3006     $RM \"\$progdir/\$file\"
3007   fi"
3008         else
3009           $ECHO "\
3010   program='$outputname'
3011   progdir=\"\$thisdir/$objdir\"
3012 "
3013         fi
3014
3015         $ECHO "\
3016
3017   if test -f \"\$progdir/\$program\"; then"
3018
3019         # Export our shlibpath_var if we have one.
3020         if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
3021           $ECHO "\
3022     # Add our own library path to $shlibpath_var
3023     $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
3024
3025     # Some systems cannot cope with colon-terminated $shlibpath_var
3026     # The second colon is a workaround for a bug in BeOS R4 sed
3027     $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
3028
3029     export $shlibpath_var
3030 "
3031         fi
3032
3033         # fixup the dll searchpath if we need to.
3034         if test -n "$dllsearchpath"; then
3035           $ECHO "\
3036     # Add the dll search path components to the executable PATH
3037     PATH=$dllsearchpath:\$PATH
3038 "
3039         fi
3040
3041         $ECHO "\
3042     if test \"\$libtool_execute_magic\" != \"$magic\"; then
3043       # Run the actual program with our arguments.
3044 "
3045         case $host in
3046         # Backslashes separate directories on plain windows
3047         *-*-mingw | *-*-os2* | *-cegcc*)
3048           $ECHO "\
3049       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
3050 "
3051           ;;
3052
3053         *)
3054           $ECHO "\
3055       exec \"\$progdir/\$program\" \${1+\"\$@\"}
3056 "
3057           ;;
3058         esac
3059         $ECHO "\
3060       \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
3061       exit 1
3062     fi
3063   else
3064     # The program doesn't exist.
3065     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
3066     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
3067     $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
3068     exit 1
3069   fi
3070 fi\
3071 "
3072 }
3073 # end: func_emit_wrapper_part2
3074
3075
3076 # func_emit_wrapper [arg=no]
3077 #
3078 # Emit a libtool wrapper script on stdout.
3079 # Don't directly open a file because we may want to
3080 # incorporate the script contents within a cygwin/mingw
3081 # wrapper executable.  Must ONLY be called from within
3082 # func_mode_link because it depends on a number of variables
3083 # set therein.
3084 #
3085 # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
3086 # variable will take.  If 'yes', then the emitted script
3087 # will assume that the directory in which it is stored is
3088 # the $objdir directory.  This is a cygwin/mingw-specific
3089 # behavior.
3090 func_emit_wrapper ()
3091 {
3092         func_emit_wrapper_arg1=no
3093         if test -n "$1" ; then
3094           func_emit_wrapper_arg1=$1
3095         fi
3096
3097         # split this up so that func_emit_cwrapperexe_src
3098         # can call each part independently.
3099         func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
3100         func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
3101 }
3102
3103
3104 # func_to_host_path arg
3105 #
3106 # Convert paths to host format when used with build tools.
3107 # Intended for use with "native" mingw (where libtool itself
3108 # is running under the msys shell), or in the following cross-
3109 # build environments:
3110 #    $build          $host
3111 #    mingw (msys)    mingw  [e.g. native]
3112 #    cygwin          mingw
3113 #    *nix + wine     mingw
3114 # where wine is equipped with the `winepath' executable.
3115 # In the native mingw case, the (msys) shell automatically
3116 # converts paths for any non-msys applications it launches,
3117 # but that facility isn't available from inside the cwrapper.
3118 # Similar accommodations are necessary for $host mingw and
3119 # $build cygwin.  Calling this function does no harm for other
3120 # $host/$build combinations not listed above.
3121 #
3122 # ARG is the path (on $build) that should be converted to
3123 # the proper representation for $host. The result is stored
3124 # in $func_to_host_path_result.
3125 func_to_host_path ()
3126 {
3127   func_to_host_path_result="$1"
3128   if test -n "$1" ; then
3129     case $host in
3130       *mingw* )
3131         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
3132         case $build in
3133           *mingw* ) # actually, msys
3134             # awkward: cmd appends spaces to result
3135             lt_sed_strip_trailing_spaces="s/[ ]*\$//"
3136             func_to_host_path_tmp1=`( cmd //c echo "$1" |\
3137               $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
3138             func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
3139               $SED -e "$lt_sed_naive_backslashify"`
3140             ;;
3141           *cygwin* )
3142             func_to_host_path_tmp1=`cygpath -w "$1"`
3143             func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
3144               $SED -e "$lt_sed_naive_backslashify"`
3145             ;;
3146           * )
3147             # Unfortunately, winepath does not exit with a non-zero
3148             # error code, so we are forced to check the contents of
3149             # stdout. On the other hand, if the command is not
3150             # found, the shell will set an exit code of 127 and print
3151             # *an error message* to stdout. So we must check for both
3152             # error code of zero AND non-empty stdout, which explains
3153             # the odd construction:
3154             func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
3155             if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
3156               func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
3157                 $SED -e "$lt_sed_naive_backslashify"`
3158             else
3159               # Allow warning below.
3160               func_to_host_path_result=""
3161             fi
3162             ;;
3163         esac
3164         if test -z "$func_to_host_path_result" ; then
3165           func_error "Could not determine host path corresponding to"
3166           func_error "  '$1'"
3167           func_error "Continuing, but uninstalled executables may not work."
3168           # Fallback:
3169           func_to_host_path_result="$1"
3170         fi
3171         ;;
3172     esac
3173   fi
3174 }
3175 # end: func_to_host_path
3176
3177 # func_to_host_pathlist arg
3178 #
3179 # Convert pathlists to host format when used with build tools.
3180 # See func_to_host_path(), above. This function supports the
3181 # following $build/$host combinations (but does no harm for
3182 # combinations not listed here):
3183 #    $build          $host
3184 #    mingw (msys)    mingw  [e.g. native]
3185 #    cygwin          mingw
3186 #    *nix + wine     mingw
3187 #
3188 # Path separators are also converted from $build format to
3189 # $host format. If ARG begins or ends with a path separator
3190 # character, it is preserved (but converted to $host format)
3191 # on output.
3192 #
3193 # ARG is a pathlist (on $build) that should be converted to
3194 # the proper representation on $host. The result is stored
3195 # in $func_to_host_pathlist_result.
3196 func_to_host_pathlist ()
3197 {
3198   func_to_host_pathlist_result="$1"
3199   if test -n "$1" ; then
3200     case $host in
3201       *mingw* )
3202         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
3203         # Remove leading and trailing path separator characters from
3204         # ARG. msys behavior is inconsistent here, cygpath turns them
3205         # into '.;' and ';.', and winepath ignores them completely.
3206         func_to_host_pathlist_tmp2="$1"
3207         # Once set for this call, this variable should not be
3208         # reassigned. It is used in tha fallback case.
3209         func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
3210           $SED -e 's|^:*||' -e 's|:*$||'`
3211         case $build in
3212           *mingw* ) # Actually, msys.
3213             # Awkward: cmd appends spaces to result.
3214             lt_sed_strip_trailing_spaces="s/[ ]*\$//"
3215             func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
3216               $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
3217             func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
3218               $SED -e "$lt_sed_naive_backslashify"`
3219             ;;
3220           *cygwin* )
3221             func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
3222             func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
3223               $SED -e "$lt_sed_naive_backslashify"`
3224             ;;
3225           * )
3226             # unfortunately, winepath doesn't convert pathlists
3227             func_to_host_pathlist_result=""
3228             func_to_host_pathlist_oldIFS=$IFS
3229             IFS=:
3230             for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
3231               IFS=$func_to_host_pathlist_oldIFS
3232               if test -n "$func_to_host_pathlist_f" ; then
3233                 func_to_host_path "$func_to_host_pathlist_f"
3234                 if test -n "$func_to_host_path_result" ; then
3235                   if test -z "$func_to_host_pathlist_result" ; then
3236                     func_to_host_pathlist_result="$func_to_host_path_result"
3237                   else
3238                     func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
3239                   fi
3240                 fi
3241               fi
3242               IFS=:
3243             done
3244             IFS=$func_to_host_pathlist_oldIFS
3245             ;;
3246         esac
3247         if test -z "$func_to_host_pathlist_result" ; then
3248           func_error "Could not determine the host path(s) corresponding to"
3249           func_error "  '$1'"
3250           func_error "Continuing, but uninstalled executables may not work."
3251           # Fallback. This may break if $1 contains DOS-style drive
3252           # specifications. The fix is not to complicate the expression
3253           # below, but for the user to provide a working wine installation
3254           # with winepath so that path translation in the cross-to-mingw
3255           # case works properly.
3256           lt_replace_pathsep_nix_to_dos="s|:|;|g"
3257           func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
3258             $SED -e "$lt_replace_pathsep_nix_to_dos"`
3259         fi
3260         # Now, add the leading and trailing path separators back
3261         case "$1" in
3262           :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
3263             ;;
3264         esac
3265         case "$1" in
3266           *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
3267             ;;
3268         esac
3269         ;;
3270     esac
3271   fi
3272 }
3273 # end: func_to_host_pathlist
3274
3275 # func_emit_cwrapperexe_src
3276 # emit the source code for a wrapper executable on stdout
3277 # Must ONLY be called from within func_mode_link because
3278 # it depends on a number of variable set therein.
3279 func_emit_cwrapperexe_src ()
3280 {
3281         cat <<EOF
3282
3283 /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
3284    Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
3285
3286    The $output program cannot be directly executed until all the libtool
3287    libraries that it depends on are installed.
3288
3289    This wrapper executable should never be moved out of the build directory.
3290    If it is, it will not operate correctly.
3291
3292    Currently, it simply execs the wrapper *script* "$SHELL $output",
3293    but could eventually absorb all of the scripts functionality and
3294    exec $objdir/$outputname directly.
3295 */
3296 EOF
3297             cat <<"EOF"
3298 #include <stdio.h>
3299 #include <stdlib.h>
3300 #ifdef _MSC_VER
3301 # include <direct.h>
3302 # include <process.h>
3303 # include <io.h>
3304 # define setmode _setmode
3305 #else
3306 # include <unistd.h>
3307 # include <stdint.h>
3308 # ifdef __CYGWIN__
3309 #  include <io.h>
3310 #  define HAVE_SETENV
3311 #  ifdef __STRICT_ANSI__
3312 char *realpath (const char *, char *);
3313 int putenv (char *);
3314 int setenv (const char *, const char *, int);
3315 #  endif
3316 # endif
3317 #endif
3318 #include <malloc.h>
3319 #include <stdarg.h>
3320 #include <assert.h>
3321 #include <string.h>
3322 #include <ctype.h>
3323 #include <errno.h>
3324 #include <fcntl.h>
3325 #include <sys/stat.h>
3326
3327 #if defined(PATH_MAX)
3328 # define LT_PATHMAX PATH_MAX
3329 #elif defined(MAXPATHLEN)
3330 # define LT_PATHMAX MAXPATHLEN
3331 #else
3332 # define LT_PATHMAX 1024
3333 #endif
3334
3335 #ifndef S_IXOTH
3336 # define S_IXOTH 0
3337 #endif
3338 #ifndef S_IXGRP
3339 # define S_IXGRP 0
3340 #endif
3341
3342 #ifdef _MSC_VER
3343 # define S_IXUSR _S_IEXEC
3344 # define stat _stat
3345 # ifndef _INTPTR_T_DEFINED
3346 #  define intptr_t int
3347 # endif
3348 #endif
3349
3350 #ifndef DIR_SEPARATOR
3351 # define DIR_SEPARATOR '/'
3352 # define PATH_SEPARATOR ':'
3353 #endif
3354
3355 #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
3356   defined (__OS2__)
3357 # define HAVE_DOS_BASED_FILE_SYSTEM
3358 # define FOPEN_WB "wb"
3359 # ifndef DIR_SEPARATOR_2
3360 #  define DIR_SEPARATOR_2 '\\'
3361 # endif
3362 # ifndef PATH_SEPARATOR_2
3363 #  define PATH_SEPARATOR_2 ';'
3364 # endif
3365 #endif
3366
3367 #ifndef DIR_SEPARATOR_2
3368 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
3369 #else /* DIR_SEPARATOR_2 */
3370 # define IS_DIR_SEPARATOR(ch) \
3371         (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
3372 #endif /* DIR_SEPARATOR_2 */
3373
3374 #ifndef PATH_SEPARATOR_2
3375 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
3376 #else /* PATH_SEPARATOR_2 */
3377 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
3378 #endif /* PATH_SEPARATOR_2 */
3379
3380 #ifdef __CYGWIN__
3381 # define FOPEN_WB "wb"
3382 #endif
3383
3384 #ifndef FOPEN_WB
3385 # define FOPEN_WB "w"
3386 #endif
3387 #ifndef _O_BINARY
3388 # define _O_BINARY 0
3389 #endif
3390
3391 #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
3392 #define XFREE(stale) do { \
3393   if (stale) { free ((void *) stale); stale = 0; } \
3394 } while (0)
3395
3396 #undef LTWRAPPER_DEBUGPRINTF
3397 #if defined DEBUGWRAPPER
3398 # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
3399 static void
3400 ltwrapper_debugprintf (const char *fmt, ...)
3401 {
3402     va_list args;
3403     va_start (args, fmt);
3404     (void) vfprintf (stderr, fmt, args);
3405     va_end (args);
3406 }
3407 #else
3408 # define LTWRAPPER_DEBUGPRINTF(args)
3409 #endif
3410
3411 const char *program_name = NULL;
3412
3413 void *xmalloc (size_t num);
3414 char *xstrdup (const char *string);
3415 const char *base_name (const char *name);
3416 char *find_executable (const char *wrapper);
3417 char *chase_symlinks (const char *pathspec);
3418 int make_executable (const char *path);
3419 int check_executable (const char *path);
3420 char *strendzap (char *str, const char *pat);
3421 void lt_fatal (const char *message, ...);
3422 void lt_setenv (const char *name, const char *value);
3423 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
3424 void lt_opt_process_env_set (const char *arg);
3425 void lt_opt_process_env_prepend (const char *arg);
3426 void lt_opt_process_env_append (const char *arg);
3427 int lt_split_name_value (const char *arg, char** name, char** value);
3428 void lt_update_exe_path (const char *name, const char *value);
3429 void lt_update_lib_path (const char *name, const char *value);
3430
3431 static const char *script_text_part1 =
3432 EOF
3433
3434             func_emit_wrapper_part1 yes |
3435                 $SED -e 's/\([\\"]\)/\\\1/g' \
3436                      -e 's/^/  "/' -e 's/$/\\n"/'
3437             echo ";"
3438             cat <<EOF
3439
3440 static const char *script_text_part2 =
3441 EOF
3442             func_emit_wrapper_part2 yes |
3443                 $SED -e 's/\([\\"]\)/\\\1/g' \
3444                      -e 's/^/  "/' -e 's/$/\\n"/'
3445             echo ";"
3446
3447             cat <<EOF
3448 const char * MAGIC_EXE = "$magic_exe";
3449 const char * LIB_PATH_VARNAME = "$shlibpath_var";
3450 EOF
3451
3452             if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
3453               func_to_host_pathlist "$temp_rpath"
3454               cat <<EOF
3455 const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
3456 EOF
3457             else
3458               cat <<"EOF"
3459 const char * LIB_PATH_VALUE   = "";
3460 EOF
3461             fi
3462
3463             if test -n "$dllsearchpath"; then
3464               func_to_host_pathlist "$dllsearchpath:"
3465               cat <<EOF
3466 const char * EXE_PATH_VARNAME = "PATH";
3467 const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
3468 EOF
3469             else
3470               cat <<"EOF"
3471 const char * EXE_PATH_VARNAME = "";
3472 const char * EXE_PATH_VALUE   = "";
3473 EOF
3474             fi
3475
3476             if test "$fast_install" = yes; then
3477               cat <<EOF
3478 const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
3479 EOF
3480             else
3481               cat <<EOF
3482 const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
3483 EOF
3484             fi
3485
3486
3487             cat <<"EOF"
3488
3489 #define LTWRAPPER_OPTION_PREFIX         "--lt-"
3490 #define LTWRAPPER_OPTION_PREFIX_LENGTH  5
3491
3492 static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
3493 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
3494
3495 static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
3496
3497 static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
3498 static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
3499   /* argument is putenv-style "foo=bar", value of foo is set to bar */
3500
3501 static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
3502 static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
3503   /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
3504
3505 static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
3506 static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
3507   /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
3508
3509 int
3510 main (int argc, char *argv[])
3511 {
3512   char **newargz;
3513   int  newargc;
3514   char *tmp_pathspec;
3515   char *actual_cwrapper_path;
3516   char *actual_cwrapper_name;
3517   char *target_name;
3518   char *lt_argv_zero;
3519   intptr_t rval = 127;
3520
3521   int i;
3522
3523   program_name = (char *) xstrdup (base_name (argv[0]));
3524   LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
3525   LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
3526
3527   /* very simple arg parsing; don't want to rely on getopt */
3528   for (i = 1; i < argc; i++)
3529     {
3530       if (strcmp (argv[i], dumpscript_opt) == 0)
3531         {
3532 EOF
3533             case "$host" in
3534               *mingw* | *cygwin* )
3535                 # make stdout use "unix" line endings
3536                 echo "          setmode(1,_O_BINARY);"
3537                 ;;
3538               esac
3539
3540             cat <<"EOF"
3541           printf ("%s", script_text_part1);
3542           printf ("%s", script_text_part2);
3543           return 0;
3544         }
3545     }
3546
3547   newargz = XMALLOC (char *, argc + 1);
3548   tmp_pathspec = find_executable (argv[0]);
3549   if (tmp_pathspec == NULL)
3550     lt_fatal ("Couldn't find %s", argv[0]);
3551   LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
3552                           tmp_pathspec));
3553
3554   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
3555   LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
3556                           actual_cwrapper_path));
3557   XFREE (tmp_pathspec);
3558
3559   actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
3560   strendzap (actual_cwrapper_path, actual_cwrapper_name);
3561
3562   /* wrapper name transforms */
3563   strendzap (actual_cwrapper_name, ".exe");
3564   tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
3565   XFREE (actual_cwrapper_name);
3566   actual_cwrapper_name = tmp_pathspec;
3567   tmp_pathspec = 0;
3568
3569   /* target_name transforms -- use actual target program name; might have lt- prefix */
3570   target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
3571   strendzap (target_name, ".exe");
3572   tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
3573   XFREE (target_name);
3574   target_name = tmp_pathspec;
3575   tmp_pathspec = 0;
3576
3577   LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
3578                           target_name));
3579 EOF
3580
3581             cat <<EOF
3582   newargz[0] =
3583     XMALLOC (char, (strlen (actual_cwrapper_path) +
3584                     strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
3585   strcpy (newargz[0], actual_cwrapper_path);
3586   strcat (newargz[0], "$objdir");
3587   strcat (newargz[0], "/");
3588 EOF
3589
3590             cat <<"EOF"
3591   /* stop here, and copy so we don't have to do this twice */
3592   tmp_pathspec = xstrdup (newargz[0]);
3593
3594   /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
3595   strcat (newargz[0], actual_cwrapper_name);
3596
3597   /* DO want the lt- prefix here if it exists, so use target_name */
3598   lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
3599   XFREE (tmp_pathspec);
3600   tmp_pathspec = NULL;
3601 EOF
3602
3603             case $host_os in
3604               mingw*)
3605             cat <<"EOF"
3606   {
3607     char* p;
3608     while ((p = strchr (newargz[0], '\\')) != NULL)
3609       {
3610         *p = '/';
3611       }
3612     while ((p = strchr (lt_argv_zero, '\\')) != NULL)
3613       {
3614         *p = '/';
3615       }
3616   }
3617 EOF
3618             ;;
3619             esac
3620
3621             cat <<"EOF"
3622   XFREE (target_name);
3623   XFREE (actual_cwrapper_path);
3624   XFREE (actual_cwrapper_name);
3625
3626   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
3627   lt_setenv ("DUALCASE", "1");  /* for MSK sh */
3628   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
3629   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
3630
3631   newargc=0;
3632   for (i = 1; i < argc; i++)
3633     {
3634       if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
3635         {
3636           if (argv[i][env_set_opt_len] == '=')
3637             {
3638               const char *p = argv[i] + env_set_opt_len + 1;
3639               lt_opt_process_env_set (p);
3640             }
3641           else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
3642             {
3643               lt_opt_process_env_set (argv[++i]); /* don't copy */
3644             }
3645           else
3646             lt_fatal ("%s missing required argument", env_set_opt);
3647           continue;
3648         }
3649       if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
3650         {
3651           if (argv[i][env_prepend_opt_len] == '=')
3652             {
3653               const char *p = argv[i] + env_prepend_opt_len + 1;
3654               lt_opt_process_env_prepend (p);
3655             }
3656           else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
3657             {
3658               lt_opt_process_env_prepend (argv[++i]); /* don't copy */
3659             }
3660           else
3661             lt_fatal ("%s missing required argument", env_prepend_opt);
3662           continue;
3663         }
3664       if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
3665         {
3666           if (argv[i][env_append_opt_len] == '=')
3667             {
3668               const char *p = argv[i] + env_append_opt_len + 1;
3669               lt_opt_process_env_append (p);
3670             }
3671           else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
3672             {
3673               lt_opt_process_env_append (argv[++i]); /* don't copy */
3674             }
3675           else
3676             lt_fatal ("%s missing required argument", env_append_opt);
3677           continue;
3678         }
3679       if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
3680         {
3681           /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
3682              namespace, but it is not one of the ones we know about and
3683              have already dealt with, above (inluding dump-script), then
3684              report an error. Otherwise, targets might begin to believe
3685              they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
3686              namespace. The first time any user complains about this, we'll
3687              need to make LTWRAPPER_OPTION_PREFIX a configure-time option
3688              or a configure.ac-settable value.
3689            */
3690           lt_fatal ("Unrecognized option in %s namespace: '%s'",
3691                     ltwrapper_option_prefix, argv[i]);
3692         }
3693       /* otherwise ... */
3694       newargz[++newargc] = xstrdup (argv[i]);
3695     }
3696   newargz[++newargc] = NULL;
3697
3698   LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
3699   for (i = 0; i < newargc; i++)
3700     {
3701       LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
3702     }
3703
3704 EOF
3705
3706             case $host_os in
3707               mingw*)
3708                 cat <<"EOF"
3709   /* execv doesn't actually work on mingw as expected on unix */
3710   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
3711   if (rval == -1)
3712     {
3713       /* failed to start process */
3714       LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
3715       return 127;
3716     }
3717   return rval;
3718 EOF
3719                 ;;
3720               *)
3721                 cat <<"EOF"
3722   execv (lt_argv_zero, newargz);
3723   return rval; /* =127, but avoids unused variable warning */
3724 EOF
3725                 ;;
3726             esac
3727
3728             cat <<"EOF"
3729 }
3730
3731 void *
3732 xmalloc (size_t num)
3733 {
3734   void *p = (void *) malloc (num);
3735   if (!p)
3736     lt_fatal ("Memory exhausted");
3737
3738   return p;
3739 }
3740
3741 char *
3742 xstrdup (const char *string)
3743 {
3744   return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
3745                           string) : NULL;
3746 }
3747
3748 const char *
3749 base_name (const char *name)
3750 {
3751   const char *base;
3752
3753 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
3754   /* Skip over the disk name in MSDOS pathnames. */
3755   if (isalpha ((unsigned char) name[0]) && name[1] == ':')
3756     name += 2;
3757 #endif
3758
3759   for (base = name; *name; name++)
3760     if (IS_DIR_SEPARATOR (*name))
3761       base = name + 1;
3762   return base;
3763 }
3764
3765 int
3766 check_executable (const char *path)
3767 {
3768   struct stat st;
3769
3770   LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
3771                           path ? (*path ? path : "EMPTY!") : "NULL!"));
3772   if ((!path) || (!*path))
3773     return 0;
3774
3775   if ((stat (path, &st) >= 0)
3776       && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
3777     return 1;
3778   else
3779     return 0;
3780 }
3781
3782 int
3783 make_executable (const char *path)
3784 {
3785   int rval = 0;
3786   struct stat st;
3787
3788   LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
3789                           path ? (*path ? path : "EMPTY!") : "NULL!"));
3790   if ((!path) || (!*path))
3791     return 0;
3792
3793   if (stat (path, &st) >= 0)
3794     {
3795       rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
3796     }
3797   return rval;
3798 }
3799
3800 /* Searches for the full path of the wrapper.  Returns
3801    newly allocated full path name if found, NULL otherwise
3802    Does not chase symlinks, even on platforms that support them.
3803 */
3804 char *
3805 find_executable (const char *wrapper)
3806 {
3807   int has_slash = 0;
3808   const char *p;
3809   const char *p_next;
3810   /* static buffer for getcwd */
3811   char tmp[LT_PATHMAX + 1];
3812   int tmp_len;
3813   char *concat_name;
3814
3815   LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
3816                           wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
3817
3818   if ((wrapper == NULL) || (*wrapper == '\0'))
3819     return NULL;
3820
3821   /* Absolute path? */
3822 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
3823   if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
3824     {
3825       concat_name = xstrdup (wrapper);
3826       if (check_executable (concat_name))
3827         return concat_name;
3828       XFREE (concat_name);
3829     }
3830   else
3831     {
3832 #endif
3833       if (IS_DIR_SEPARATOR (wrapper[0]))
3834         {
3835           concat_name = xstrdup (wrapper);
3836           if (check_executable (concat_name))
3837             return concat_name;
3838           XFREE (concat_name);
3839         }
3840 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
3841     }
3842 #endif
3843
3844   for (p = wrapper; *p; p++)
3845     if (*p == '/')
3846       {
3847         has_slash = 1;
3848         break;
3849       }
3850   if (!has_slash)
3851     {
3852       /* no slashes; search PATH */
3853       const char *path = getenv ("PATH");
3854       if (path != NULL)
3855         {
3856           for (p = path; *p; p = p_next)
3857             {
3858               const char *q;
3859               size_t p_len;
3860               for (q = p; *q; q++)
3861                 if (IS_PATH_SEPARATOR (*q))
3862                   break;
3863               p_len = q - p;
3864               p_next = (*q == '\0' ? q : q + 1);
3865               if (p_len == 0)
3866                 {
3867                   /* empty path: current directory */
3868                   if (getcwd (tmp, LT_PATHMAX) == NULL)
3869                     lt_fatal ("getcwd failed");
3870                   tmp_len = strlen (tmp);
3871                   concat_name =
3872                     XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
3873                   memcpy (concat_name, tmp, tmp_len);
3874                   concat_name[tmp_len] = '/';
3875                   strcpy (concat_name + tmp_len + 1, wrapper);
3876                 }
3877               else
3878                 {
3879                   concat_name =
3880                     XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
3881                   memcpy (concat_name, p, p_len);
3882                   concat_name[p_len] = '/';
3883                   strcpy (concat_name + p_len + 1, wrapper);
3884                 }
3885               if (check_executable (concat_name))
3886                 return concat_name;
3887               XFREE (concat_name);
3888             }
3889         }
3890       /* not found in PATH; assume curdir */
3891     }
3892   /* Relative path | not found in path: prepend cwd */
3893   if (getcwd (tmp, LT_PATHMAX) == NULL)
3894     lt_fatal ("getcwd failed");
3895   tmp_len = strlen (tmp);
3896   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
3897   memcpy (concat_name, tmp, tmp_len);
3898   concat_name[tmp_len] = '/';
3899   strcpy (concat_name + tmp_len + 1, wrapper);
3900
3901   if (check_executable (concat_name))
3902     return concat_name;
3903   XFREE (concat_name);
3904   return NULL;
3905 }
3906
3907 char *
3908 chase_symlinks (const char *pathspec)
3909 {
3910 #ifndef S_ISLNK
3911   return xstrdup (pathspec);
3912 #else
3913   char buf[LT_PATHMAX];
3914   struct stat s;
3915   char *tmp_pathspec = xstrdup (pathspec);
3916   char *p;
3917   int has_symlinks = 0;
3918   while (strlen (tmp_pathspec) && !has_symlinks)
3919     {
3920       LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
3921                               tmp_pathspec));
3922       if (lstat (tmp_pathspec, &s) == 0)
3923         {
3924           if (S_ISLNK (s.st_mode) != 0)
3925             {
3926               has_symlinks = 1;
3927               break;
3928             }
3929
3930           /* search backwards for last DIR_SEPARATOR */
3931           p = tmp_pathspec + strlen (tmp_pathspec) - 1;
3932           while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
3933             p--;
3934           if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
3935             {
3936               /* no more DIR_SEPARATORS left */
3937               break;
3938             }
3939           *p = '\0';
3940         }
3941       else
3942         {
3943           char *errstr = strerror (errno);
3944           lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
3945         }
3946     }
3947   XFREE (tmp_pathspec);
3948
3949   if (!has_symlinks)
3950     {
3951       return xstrdup (pathspec);
3952     }
3953
3954   tmp_pathspec = realpath (pathspec, buf);
3955   if (tmp_pathspec == 0)
3956     {
3957       lt_fatal ("Could not follow symlinks for %s", pathspec);
3958     }
3959   return xstrdup (tmp_pathspec);
3960 #endif
3961 }
3962
3963 char *
3964 strendzap (char *str, const char *pat)
3965 {
3966   size_t len, patlen;
3967
3968   assert (str != NULL);
3969   assert (pat != NULL);
3970
3971   len = strlen (str);
3972   patlen = strlen (pat);
3973
3974   if (patlen <= len)
3975     {
3976       str += len - patlen;
3977       if (strcmp (str, pat) == 0)
3978         *str = '\0';
3979     }
3980   return str;
3981 }
3982
3983 static void
3984 lt_error_core (int exit_status, const char *mode,
3985                const char *message, va_list ap)
3986 {
3987   fprintf (stderr, "%s: %s: ", program_name, mode);
3988   vfprintf (stderr, message, ap);
3989   fprintf (stderr, ".\n");
3990
3991   if (exit_status >= 0)
3992     exit (exit_status);
3993 }
3994
3995 void
3996 lt_fatal (const char *message, ...)
3997 {
3998   va_list ap;
3999   va_start (ap, message);
4000   lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
4001   va_end (ap);
4002 }
4003
4004 void
4005 lt_setenv (const char *name, const char *value)
4006 {
4007   LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
4008                           (name ? name : "<NULL>"),
4009                           (value ? value : "<NULL>")));
4010   {
4011 #ifdef HAVE_SETENV
4012     /* always make a copy, for consistency with !HAVE_SETENV */
4013     char *str = xstrdup (value);
4014     setenv (name, str, 1);
4015 #else
4016     int len = strlen (name) + 1 + strlen (value) + 1;
4017     char *str = XMALLOC (char, len);
4018     sprintf (str, "%s=%s", name, value);
4019     if (putenv (str) != EXIT_SUCCESS)
4020       {
4021         XFREE (str);
4022       }
4023 #endif
4024   }
4025 }
4026
4027 char *
4028 lt_extend_str (const char *orig_value, const char *add, int to_end)
4029 {
4030   char *new_value;
4031   if (orig_value && *orig_value)
4032     {
4033       int orig_value_len = strlen (orig_value);
4034       int add_len = strlen (add);
4035       new_value = XMALLOC (char, add_len + orig_value_len + 1);
4036       if (to_end)
4037         {
4038           strcpy (new_value, orig_value);
4039           strcpy (new_value + orig_value_len, add);
4040         }
4041       else
4042         {
4043           strcpy (new_value, add);
4044           strcpy (new_value + add_len, orig_value);
4045         }
4046     }
4047   else
4048     {
4049       new_value = xstrdup (add);
4050     }
4051   return new_value;
4052 }
4053
4054 int
4055 lt_split_name_value (const char *arg, char** name, char** value)
4056 {
4057   const char *p;
4058   int len;
4059   if (!arg || !*arg)
4060     return 1;
4061
4062   p = strchr (arg, (int)'=');
4063
4064   if (!p)
4065     return 1;
4066
4067   *value = xstrdup (++p);
4068
4069   len = strlen (arg) - strlen (*value);
4070   *name = XMALLOC (char, len);
4071   strncpy (*name, arg, len-1);
4072   (*name)[len - 1] = '\0';
4073
4074   return 0;
4075 }
4076
4077 void
4078 lt_opt_process_env_set (const char *arg)
4079 {
4080   char *name = NULL;
4081   char *value = NULL;
4082
4083   if (lt_split_name_value (arg, &name, &value) != 0)
4084     {
4085       XFREE (name);
4086       XFREE (value);
4087       lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
4088     }
4089
4090   lt_setenv (name, value);
4091   XFREE (name);
4092   XFREE (value);
4093 }
4094
4095 void
4096 lt_opt_process_env_prepend (const char *arg)
4097 {
4098   char *name = NULL;
4099   char *value = NULL;
4100   char *new_value = NULL;
4101
4102   if (lt_split_name_value (arg, &name, &value) != 0)
4103     {
4104       XFREE (name);
4105       XFREE (value);
4106       lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
4107     }
4108
4109   new_value = lt_extend_str (getenv (name), value, 0);
4110   lt_setenv (name, new_value);
4111   XFREE (new_value);
4112   XFREE (name);
4113   XFREE (value);
4114 }
4115
4116 void
4117 lt_opt_process_env_append (const char *arg)
4118 {
4119   char *name = NULL;
4120   char *value = NULL;
4121   char *new_value = NULL;
4122
4123   if (lt_split_name_value (arg, &name, &value) != 0)
4124     {
4125       XFREE (name);
4126       XFREE (value);
4127       lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
4128     }
4129
4130   new_value = lt_extend_str (getenv (name), value, 1);
4131   lt_setenv (name, new_value);
4132   XFREE (new_value);
4133   XFREE (name);
4134   XFREE (value);
4135 }
4136
4137 void
4138 lt_update_exe_path (const char *name, const char *value)
4139 {
4140   LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
4141                           (name ? name : "<NULL>"),
4142                           (value ? value : "<NULL>")));
4143
4144   if (name && *name && value && *value)
4145     {
4146       char *new_value = lt_extend_str (getenv (name), value, 0);
4147       /* some systems can't cope with a ':'-terminated path #' */
4148       int len = strlen (new_value);
4149       while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
4150         {
4151           new_value[len-1] = '\0';
4152         }
4153       lt_setenv (name, new_value);
4154       XFREE (new_value);
4155     }
4156 }
4157
4158 void
4159 lt_update_lib_path (const char *name, const char *value)
4160 {
4161   LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
4162                           (name ? name : "<NULL>"),
4163                           (value ? value : "<NULL>")));
4164
4165   if (name && *name && value && *value)
4166     {
4167       char *new_value = lt_extend_str (getenv (name), value, 0);
4168       lt_setenv (name, new_value);
4169       XFREE (new_value);
4170     }
4171 }
4172
4173
4174 EOF
4175 }
4176 # end: func_emit_cwrapperexe_src
4177
4178 # func_mode_link arg...
4179 func_mode_link ()
4180 {
4181     $opt_debug
4182     case $host in
4183     *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
4184       # It is impossible to link a dll without this setting, and
4185       # we shouldn't force the makefile maintainer to figure out
4186       # which system we are compiling for in order to pass an extra
4187       # flag for every libtool invocation.
4188       # allow_undefined=no
4189
4190       # FIXME: Unfortunately, there are problems with the above when trying
4191       # to make a dll which has undefined symbols, in which case not
4192       # even a static library is built.  For now, we need to specify
4193       # -no-undefined on the libtool link line when we can be certain
4194       # that all symbols are satisfied, otherwise we get a static library.
4195       allow_undefined=yes
4196       ;;
4197     *)
4198       allow_undefined=yes
4199       ;;
4200     esac
4201     libtool_args=$nonopt
4202     base_compile="$nonopt $@"
4203     compile_command=$nonopt
4204     finalize_command=$nonopt
4205
4206     compile_rpath=
4207     finalize_rpath=
4208     compile_shlibpath=
4209     finalize_shlibpath=
4210     convenience=
4211     old_convenience=
4212     deplibs=
4213     old_deplibs=
4214     compiler_flags=
4215     linker_flags=
4216     dllsearchpath=
4217     lib_search_path=`pwd`
4218     inst_prefix_dir=
4219     new_inherited_linker_flags=
4220
4221     avoid_version=no
4222     bindir=
4223     dlfiles=
4224     dlprefiles=
4225     dlself=no
4226     export_dynamic=no
4227     export_symbols=
4228     export_symbols_regex=
4229     generated=
4230     libobjs=
4231     ltlibs=
4232     module=no
4233     no_install=no
4234     objs=
4235     non_pic_objects=
4236     precious_files_regex=
4237     prefer_static_libs=no
4238     preload=no
4239     prev=
4240     prevarg=
4241     release=
4242     rpath=
4243     xrpath=
4244     perm_rpath=
4245     temp_rpath=
4246     thread_safe=no
4247     vinfo=
4248     vinfo_number=no
4249     weak_libs=
4250     single_module="${wl}-single_module"
4251     func_infer_tag $base_compile
4252
4253     # We need to know -static, to get the right output filenames.
4254     for arg
4255     do
4256       case $arg in
4257       -shared)
4258         test "$build_libtool_libs" != yes && \
4259           func_fatal_configuration "can not build a shared library"
4260         build_old_libs=no
4261         break
4262         ;;
4263       -all-static | -static | -static-libtool-libs)
4264         case $arg in
4265         -all-static)
4266           if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
4267             func_warning "complete static linking is impossible in this configuration"
4268           fi
4269           if test -n "$link_static_flag"; then
4270             dlopen_self=$dlopen_self_static
4271           fi
4272           prefer_static_libs=yes
4273           ;;
4274         -static)
4275           if test -z "$pic_flag" && test -n "$link_static_flag"; then
4276             dlopen_self=$dlopen_self_static
4277           fi
4278           prefer_static_libs=built
4279           ;;
4280         -static-libtool-libs)
4281           if test -z "$pic_flag" && test -n "$link_static_flag"; then
4282             dlopen_self=$dlopen_self_static
4283           fi
4284           prefer_static_libs=yes
4285           ;;
4286         esac
4287         build_libtool_libs=no
4288         build_old_libs=yes
4289         break
4290         ;;
4291       esac
4292     done
4293
4294     # See if our shared archives depend on static archives.
4295     test -n "$old_archive_from_new_cmds" && build_old_libs=yes
4296
4297     # Go through the arguments, transforming them on the way.
4298     while test "$#" -gt 0; do
4299       arg="$1"
4300       shift
4301       func_quote_for_eval "$arg"
4302       qarg=$func_quote_for_eval_unquoted_result
4303       func_append libtool_args " $func_quote_for_eval_result"
4304
4305       # If the previous option needs an argument, assign it.
4306       if test -n "$prev"; then
4307         case $prev in
4308         output)
4309           func_append compile_command " @OUTPUT@"
4310           func_append finalize_command " @OUTPUT@"
4311           ;;
4312         esac
4313
4314         case $prev in
4315         bindir)
4316           bindir="$arg"
4317           prev=
4318           continue
4319           ;;
4320         dlfiles|dlprefiles)
4321           if test "$preload" = no; then
4322             # Add the symbol object into the linking commands.
4323             func_append compile_command " @SYMFILE@"
4324             func_append finalize_command " @SYMFILE@"
4325             preload=yes
4326           fi
4327           case $arg in
4328           *.la | *.lo) ;;  # We handle these cases below.
4329           force)
4330             if test "$dlself" = no; then
4331               dlself=needless
4332               export_dynamic=yes
4333             fi
4334             prev=
4335             continue
4336             ;;
4337           self)
4338             if test "$prev" = dlprefiles; then
4339               dlself=yes
4340             elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
4341               dlself=yes
4342             else
4343               dlself=needless
4344               export_dynamic=yes
4345             fi
4346             prev=
4347             continue
4348             ;;
4349           *)
4350             if test "$prev" = dlfiles; then
4351               dlfiles="$dlfiles $arg"
4352             else
4353               dlprefiles="$dlprefiles $arg"
4354             fi
4355             prev=
4356             continue
4357             ;;
4358           esac
4359           ;;
4360         expsyms)
4361           export_symbols="$arg"
4362           test -f "$arg" \
4363             || func_fatal_error "symbol file \`$arg' does not exist"
4364           prev=
4365           continue
4366           ;;
4367         expsyms_regex)
4368           export_symbols_regex="$arg"
4369           prev=
4370           continue
4371           ;;
4372         framework)
4373           case $host in
4374             *-*-darwin*)
4375               case "$deplibs " in
4376                 *" $qarg.ltframework "*) ;;
4377                 *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
4378                    ;;
4379               esac
4380               ;;
4381           esac
4382           prev=
4383           continue
4384           ;;
4385         inst_prefix)
4386           inst_prefix_dir="$arg"
4387           prev=
4388           continue
4389           ;;
4390         objectlist)
4391           if test -f "$arg"; then
4392             save_arg=$arg
4393             moreargs=
4394             for fil in `cat "$save_arg"`
4395             do
4396 #             moreargs="$moreargs $fil"
4397               arg=$fil
4398               # A libtool-controlled object.
4399
4400               # Check to see that this really is a libtool object.
4401               if func_lalib_unsafe_p "$arg"; then
4402                 pic_object=
4403                 non_pic_object=
4404
4405                 # Read the .lo file
4406                 func_source "$arg"
4407
4408                 if test -z "$pic_object" ||
4409                    test -z "$non_pic_object" ||
4410                    test "$pic_object" = none &&
4411                    test "$non_pic_object" = none; then
4412                   func_fatal_error "cannot find name of object for \`$arg'"
4413                 fi
4414
4415                 # Extract subdirectory from the argument.
4416                 func_dirname "$arg" "/" ""
4417                 xdir="$func_dirname_result"
4418
4419                 if test "$pic_object" != none; then
4420                   # Prepend the subdirectory the object is found in.
4421                   pic_object="$xdir$pic_object"
4422
4423                   if test "$prev" = dlfiles; then
4424                     if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
4425                       dlfiles="$dlfiles $pic_object"
4426                       prev=
4427                       continue
4428                     else
4429                       # If libtool objects are unsupported, then we need to preload.
4430                       prev=dlprefiles
4431                     fi
4432                   fi
4433
4434                   # CHECK ME:  I think I busted this.  -Ossama
4435                   if test "$prev" = dlprefiles; then
4436                     # Preload the old-style object.
4437                     dlprefiles="$dlprefiles $pic_object"
4438                     prev=
4439                   fi
4440
4441                   # A PIC object.
4442                   func_append libobjs " $pic_object"
4443                   arg="$pic_object"
4444                 fi
4445
4446                 # Non-PIC object.
4447                 if test "$non_pic_object" != none; then
4448                   # Prepend the subdirectory the object is found in.
4449                   non_pic_object="$xdir$non_pic_object"
4450
4451                   # A standard non-PIC object
4452                   func_append non_pic_objects " $non_pic_object"
4453                   if test -z "$pic_object" || test "$pic_object" = none ; then
4454                     arg="$non_pic_object"
4455                   fi
4456                 else
4457                   # If the PIC object exists, use it instead.
4458                   # $xdir was prepended to $pic_object above.
4459                   non_pic_object="$pic_object"
4460                   func_append non_pic_objects " $non_pic_object"
4461                 fi
4462               else
4463                 # Only an error if not doing a dry-run.
4464                 if $opt_dry_run; then
4465                   # Extract subdirectory from the argument.
4466                   func_dirname "$arg" "/" ""
4467                   xdir="$func_dirname_result"
4468
4469                   func_lo2o "$arg"
4470                   pic_object=$xdir$objdir/$func_lo2o_result
4471                   non_pic_object=$xdir$func_lo2o_result
4472                   func_append libobjs " $pic_object"
4473                   func_append non_pic_objects " $non_pic_object"
4474                 else
4475                   func_fatal_error "\`$arg' is not a valid libtool object"
4476                 fi
4477               fi
4478             done
4479           else
4480             func_fatal_error "link input file \`$arg' does not exist"
4481           fi
4482           arg=$save_arg
4483           prev=
4484           continue
4485           ;;
4486         precious_regex)
4487           precious_files_regex="$arg"
4488           prev=
4489           continue
4490           ;;
4491         release)
4492           release="-$arg"
4493           prev=
4494           continue
4495           ;;
4496         rpath | xrpath)
4497           # We need an absolute path.
4498           case $arg in
4499           [\\/]* | [A-Za-z]:[\\/]*) ;;
4500           *)
4501             func_fatal_error "only absolute run-paths are allowed"
4502             ;;
4503           esac
4504           if test "$prev" = rpath; then
4505             case "$rpath " in
4506             *" $arg "*) ;;
4507             *) rpath="$rpath $arg" ;;
4508             esac
4509           else
4510             case "$xrpath " in
4511             *" $arg "*) ;;
4512             *) xrpath="$xrpath $arg" ;;
4513             esac
4514           fi
4515           prev=
4516           continue
4517           ;;
4518         shrext)
4519           shrext_cmds="$arg"
4520           prev=
4521           continue
4522           ;;
4523         weak)
4524           weak_libs="$weak_libs $arg"
4525           prev=
4526           continue
4527           ;;
4528         xcclinker)
4529           linker_flags="$linker_flags $qarg"
4530           compiler_flags="$compiler_flags $qarg"
4531           prev=
4532           func_append compile_command " $qarg"
4533           func_append finalize_command " $qarg"
4534           continue
4535           ;;
4536         xcompiler)
4537           compiler_flags="$compiler_flags $qarg"
4538           prev=
4539           func_append compile_command " $qarg"
4540           func_append finalize_command " $qarg"
4541           continue
4542           ;;
4543         xlinker)
4544           linker_flags="$linker_flags $qarg"
4545           compiler_flags="$compiler_flags $wl$qarg"
4546           prev=
4547           func_append compile_command " $wl$qarg"
4548           func_append finalize_command " $wl$qarg"
4549           continue
4550           ;;
4551         *)
4552           eval "$prev=\"\$arg\""
4553           prev=
4554           continue
4555           ;;
4556         esac
4557       fi # test -n "$prev"
4558
4559       prevarg="$arg"
4560
4561       case $arg in
4562       -all-static)
4563         if test -n "$link_static_flag"; then
4564           # See comment for -static flag below, for more details.
4565           func_append compile_command " $link_static_flag"
4566           func_append finalize_command " $link_static_flag"
4567         fi
4568         continue
4569         ;;
4570
4571       -allow-undefined)
4572         # FIXME: remove this flag sometime in the future.
4573         func_fatal_error "\`-allow-undefined' must not be used because it is the default"
4574         ;;
4575
4576       -avoid-version)
4577         avoid_version=yes
4578         continue
4579         ;;
4580
4581       -bindir)
4582         prev=bindir
4583         continue
4584         ;;
4585
4586       -dlopen)
4587         prev=dlfiles
4588         continue
4589         ;;
4590
4591       -dlpreopen)
4592         prev=dlprefiles
4593         continue
4594         ;;
4595
4596       -export-dynamic)
4597         export_dynamic=yes
4598         continue
4599         ;;
4600
4601       -export-symbols | -export-symbols-regex)
4602         if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
4603           func_fatal_error "more than one -exported-symbols argument is not allowed"
4604         fi
4605         if test "X$arg" = "X-export-symbols"; then
4606           prev=expsyms
4607         else
4608           prev=expsyms_regex
4609         fi
4610         continue
4611         ;;
4612
4613       -framework)
4614         prev=framework
4615         continue
4616         ;;
4617
4618       -inst-prefix-dir)
4619         prev=inst_prefix
4620         continue
4621         ;;
4622
4623       # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
4624       # so, if we see these flags be careful not to treat them like -L
4625       -L[A-Z][A-Z]*:*)
4626         case $with_gcc/$host in
4627         no/*-*-irix* | /*-*-irix*)
4628           func_append compile_command " $arg"
4629           func_append finalize_command " $arg"
4630           ;;
4631         esac
4632         continue
4633         ;;
4634
4635       -L*)
4636         func_stripname '-L' '' "$arg"
4637         dir=$func_stripname_result
4638         if test -z "$dir"; then
4639           if test "$#" -gt 0; then
4640             func_fatal_error "require no space between \`-L' and \`$1'"
4641           else
4642             func_fatal_error "need path for \`-L' option"
4643           fi
4644         fi
4645         # We need an absolute path.
4646         case $dir in
4647         [\\/]* | [A-Za-z]:[\\/]*) ;;
4648         *)
4649           absdir=`cd "$dir" && pwd`
4650           test -z "$absdir" && \
4651             func_fatal_error "cannot determine absolute directory name of \`$dir'"
4652           dir="$absdir"
4653           ;;
4654         esac
4655         case "$deplibs " in
4656         *" -L$dir "*) ;;
4657         *)
4658           deplibs="$deplibs -L$dir"
4659           lib_search_path="$lib_search_path $dir"
4660           ;;
4661         esac
4662         case $host in
4663         *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
4664           testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
4665           case :$dllsearchpath: in
4666           *":$dir:"*) ;;
4667           ::) dllsearchpath=$dir;;
4668           *) dllsearchpath="$dllsearchpath:$dir";;
4669           esac
4670           case :$dllsearchpath: in
4671           *":$testbindir:"*) ;;
4672           ::) dllsearchpath=$testbindir;;
4673           *) dllsearchpath="$dllsearchpath:$testbindir";;
4674           esac
4675           ;;
4676         esac
4677         continue
4678         ;;
4679
4680       -l*)
4681         if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
4682           case $host in
4683           *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
4684             # These systems don't actually have a C or math library (as such)
4685             continue
4686             ;;
4687           *-*-os2*)
4688             # These systems don't actually have a C library (as such)
4689             test "X$arg" = "X-lc" && continue
4690             ;;
4691           *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
4692             # Do not include libc due to us having libc/libc_r.
4693             test "X$arg" = "X-lc" && continue
4694             ;;
4695           *-*-rhapsody* | *-*-darwin1.[012])
4696             # Rhapsody C and math libraries are in the System framework
4697             deplibs="$deplibs System.ltframework"
4698             continue
4699             ;;
4700           *-*-sco3.2v5* | *-*-sco5v6*)
4701             # Causes problems with __ctype
4702             test "X$arg" = "X-lc" && continue
4703             ;;
4704           *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
4705             # Compiler inserts libc in the correct place for threads to work
4706             test "X$arg" = "X-lc" && continue
4707             ;;
4708           esac
4709         elif test "X$arg" = "X-lc_r"; then
4710          case $host in
4711          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
4712            # Do not include libc_r directly, use -pthread flag.
4713            continue
4714            ;;
4715          esac
4716         fi
4717         deplibs="$deplibs $arg"
4718         continue
4719         ;;
4720
4721       -module)
4722         module=yes
4723         continue
4724         ;;
4725
4726       # Tru64 UNIX uses -model [arg] to determine the layout of C++
4727       # classes, name mangling, and exception handling.
4728       # Darwin uses the -arch flag to determine output architecture.
4729       -model|-arch|-isysroot)
4730         compiler_flags="$compiler_flags $arg"
4731         func_append compile_command " $arg"
4732         func_append finalize_command " $arg"
4733         prev=xcompiler
4734         continue
4735         ;;
4736
4737       -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
4738         compiler_flags="$compiler_flags $arg"
4739         func_append compile_command " $arg"
4740         func_append finalize_command " $arg"
4741         case "$new_inherited_linker_flags " in
4742             *" $arg "*) ;;
4743             * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
4744         esac
4745         continue
4746         ;;
4747
4748       -multi_module)
4749         single_module="${wl}-multi_module"
4750         continue
4751         ;;
4752
4753       -no-fast-install)
4754         fast_install=no
4755         continue
4756         ;;
4757
4758       -no-install)
4759         case $host in
4760         *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
4761           # The PATH hackery in wrapper scripts is required on Windows
4762           # and Darwin in order for the loader to find any dlls it needs.
4763           func_warning "\`-no-install' is ignored for $host"
4764           func_warning "assuming \`-no-fast-install' instead"
4765           fast_install=no
4766           ;;
4767         *) no_install=yes ;;
4768         esac
4769         continue
4770         ;;
4771
4772       -no-undefined)
4773         allow_undefined=no
4774         continue
4775         ;;
4776
4777       -objectlist)
4778         prev=objectlist
4779         continue
4780         ;;
4781
4782       -o) prev=output ;;
4783
4784       -precious-files-regex)
4785         prev=precious_regex
4786         continue
4787         ;;
4788
4789       -release)
4790         prev=release
4791         continue
4792         ;;
4793
4794       -rpath)
4795         prev=rpath
4796         continue
4797         ;;
4798
4799       -R)
4800         prev=xrpath
4801         continue
4802         ;;
4803
4804       -R*)
4805         func_stripname '-R' '' "$arg"
4806         dir=$func_stripname_result
4807         # We need an absolute path.
4808         case $dir in
4809         [\\/]* | [A-Za-z]:[\\/]*) ;;
4810         *)
4811           func_fatal_error "only absolute run-paths are allowed"
4812           ;;
4813         esac
4814         case "$xrpath " in
4815         *" $dir "*) ;;
4816         *) xrpath="$xrpath $dir" ;;
4817         esac
4818         continue
4819         ;;
4820
4821       -shared)
4822         # The effects of -shared are defined in a previous loop.
4823         continue
4824         ;;
4825
4826       -shrext)
4827         prev=shrext
4828         continue
4829         ;;
4830
4831       -static | -static-libtool-libs)
4832         # The effects of -static are defined in a previous loop.
4833         # We used to do the same as -all-static on platforms that
4834         # didn't have a PIC flag, but the assumption that the effects
4835         # would be equivalent was wrong.  It would break on at least
4836         # Digital Unix and AIX.
4837         continue
4838         ;;
4839
4840       -thread-safe)
4841         thread_safe=yes
4842         continue
4843         ;;
4844
4845       -version-info)
4846         prev=vinfo
4847         continue
4848         ;;
4849
4850       -version-number)
4851         prev=vinfo
4852         vinfo_number=yes
4853         continue
4854         ;;
4855
4856       -weak)
4857         prev=weak
4858         continue
4859         ;;
4860
4861       -Wc,*)
4862         func_stripname '-Wc,' '' "$arg"
4863         args=$func_stripname_result
4864         arg=
4865         save_ifs="$IFS"; IFS=','
4866         for flag in $args; do
4867           IFS="$save_ifs"
4868           func_quote_for_eval "$flag"
4869           arg="$arg $wl$func_quote_for_eval_result"
4870           compiler_flags="$compiler_flags $func_quote_for_eval_result"
4871         done
4872         IFS="$save_ifs"
4873         func_stripname ' ' '' "$arg"
4874         arg=$func_stripname_result
4875         ;;
4876
4877       -Wl,*)
4878         func_stripname '-Wl,' '' "$arg"
4879         args=$func_stripname_result
4880         arg=
4881         save_ifs="$IFS"; IFS=','
4882         for flag in $args; do
4883           IFS="$save_ifs"
4884           func_quote_for_eval "$flag"
4885           arg="$arg $wl$func_quote_for_eval_result"
4886           compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
4887           linker_flags="$linker_flags $func_quote_for_eval_result"
4888         done
4889         IFS="$save_ifs"
4890         func_stripname ' ' '' "$arg"
4891         arg=$func_stripname_result
4892         ;;
4893
4894       -Xcompiler)
4895         prev=xcompiler
4896         continue
4897         ;;
4898
4899       -Xlinker)
4900         prev=xlinker
4901         continue
4902         ;;
4903
4904       -XCClinker)
4905         prev=xcclinker
4906         continue
4907         ;;
4908
4909       # -msg_* for osf cc
4910       -msg_*)
4911         func_quote_for_eval "$arg"
4912         arg="$func_quote_for_eval_result"
4913         ;;
4914
4915       # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
4916       # -r[0-9][0-9]* specifies the processor on the SGI compiler
4917       # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
4918       # +DA*, +DD* enable 64-bit mode on the HP compiler
4919       # -q* pass through compiler args for the IBM compiler
4920       # -m*, -t[45]*, -txscale* pass through architecture-specific
4921       # compiler args for GCC
4922       # -F/path gives path to uninstalled frameworks, gcc on darwin
4923       # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
4924       # @file GCC response files
4925       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
4926       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
4927         func_quote_for_eval "$arg"
4928         arg="$func_quote_for_eval_result"
4929         func_append compile_command " $arg"
4930         func_append finalize_command " $arg"
4931         compiler_flags="$compiler_flags $arg"
4932         continue
4933         ;;
4934
4935       # Some other compiler flag.
4936       -* | +*)
4937         func_quote_for_eval "$arg"
4938         arg="$func_quote_for_eval_result"
4939         ;;
4940
4941       *.$objext)
4942         # A standard object.
4943         objs="$objs $arg"
4944         ;;
4945
4946       *.lo)
4947         # A libtool-controlled object.
4948
4949         # Check to see that this really is a libtool object.
4950         if func_lalib_unsafe_p "$arg"; then
4951           pic_object=
4952           non_pic_object=
4953
4954           # Read the .lo file
4955           func_source "$arg"
4956
4957           if test -z "$pic_object" ||
4958              test -z "$non_pic_object" ||
4959              test "$pic_object" = none &&
4960              test "$non_pic_object" = none; then
4961             func_fatal_error "cannot find name of object for \`$arg'"
4962           fi
4963
4964           # Extract subdirectory from the argument.
4965           func_dirname "$arg" "/" ""
4966           xdir="$func_dirname_result"
4967
4968           if test "$pic_object" != none; then
4969             # Prepend the subdirectory the object is found in.
4970             pic_object="$xdir$pic_object"
4971
4972             if test "$prev" = dlfiles; then
4973               if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
4974                 dlfiles="$dlfiles $pic_object"
4975                 prev=
4976                 continue
4977               else
4978                 # If libtool objects are unsupported, then we need to preload.
4979                 prev=dlprefiles
4980               fi
4981             fi
4982
4983             # CHECK ME:  I think I busted this.  -Ossama
4984             if test "$prev" = dlprefiles; then
4985               # Preload the old-style object.
4986               dlprefiles="$dlprefiles $pic_object"
4987               prev=
4988             fi
4989
4990             # A PIC object.
4991             func_append libobjs " $pic_object"
4992             arg="$pic_object"
4993           fi
4994
4995           # Non-PIC object.
4996           if test "$non_pic_object" != none; then
4997             # Prepend the subdirectory the object is found in.
4998             non_pic_object="$xdir$non_pic_object"
4999
5000             # A standard non-PIC object
5001             func_append non_pic_objects " $non_pic_object"
5002             if test -z "$pic_object" || test "$pic_object" = none ; then
5003               arg="$non_pic_object"
5004             fi
5005           else
5006             # If the PIC object exists, use it instead.
5007             # $xdir was prepended to $pic_object above.
5008             non_pic_object="$pic_object"
5009             func_append non_pic_objects " $non_pic_object"
5010           fi
5011         else
5012           # Only an error if not doing a dry-run.
5013           if $opt_dry_run; then
5014             # Extract subdirectory from the argument.
5015             func_dirname "$arg" "/" ""
5016             xdir="$func_dirname_result"
5017
5018             func_lo2o "$arg"
5019             pic_object=$xdir$objdir/$func_lo2o_result
5020             non_pic_object=$xdir$func_lo2o_result
5021             func_append libobjs " $pic_object"
5022             func_append non_pic_objects " $non_pic_object"
5023           else
5024             func_fatal_error "\`$arg' is not a valid libtool object"
5025           fi
5026         fi
5027         ;;
5028
5029       *.$libext)
5030         # An archive.
5031         deplibs="$deplibs $arg"
5032         old_deplibs="$old_deplibs $arg"
5033         continue
5034         ;;
5035
5036       *.la)
5037         # A libtool-controlled library.
5038
5039         if test "$prev" = dlfiles; then
5040           # This library was specified with -dlopen.
5041           dlfiles="$dlfiles $arg"
5042           prev=
5043         elif test "$prev" = dlprefiles; then
5044           # The library was specified with -dlpreopen.
5045           dlprefiles="$dlprefiles $arg"
5046           prev=
5047         else
5048           deplibs="$deplibs $arg"
5049         fi
5050         continue
5051         ;;
5052
5053       # Some other compiler argument.
5054       *)
5055         # Unknown arguments in both finalize_command and compile_command need
5056         # to be aesthetically quoted because they are evaled later.
5057         func_quote_for_eval "$arg"
5058         arg="$func_quote_for_eval_result"
5059         ;;
5060       esac # arg
5061
5062       # Now actually substitute the argument into the commands.
5063       if test -n "$arg"; then
5064         func_append compile_command " $arg"
5065         func_append finalize_command " $arg"
5066       fi
5067     done # argument parsing loop
5068
5069     test -n "$prev" && \
5070       func_fatal_help "the \`$prevarg' option requires an argument"
5071
5072     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
5073       eval arg=\"$export_dynamic_flag_spec\"
5074       func_append compile_command " $arg"
5075       func_append finalize_command " $arg"
5076     fi
5077
5078     oldlibs=
5079     # calculate the name of the file, without its directory
5080     func_basename "$output"
5081     outputname="$func_basename_result"
5082     libobjs_save="$libobjs"
5083
5084     if test -n "$shlibpath_var"; then
5085       # get the directories listed in $shlibpath_var
5086       eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
5087     else
5088       shlib_search_path=
5089     fi
5090     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
5091     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
5092
5093     func_dirname "$output" "/" ""
5094     output_objdir="$func_dirname_result$objdir"
5095     # Create the object directory.
5096     func_mkdir_p "$output_objdir"
5097
5098     # Determine the type of output
5099     case $output in
5100     "")
5101       func_fatal_help "you must specify an output file"
5102       ;;
5103     *.$libext) linkmode=oldlib ;;
5104     *.lo | *.$objext) linkmode=obj ;;
5105     *.la) linkmode=lib ;;
5106     *) linkmode=prog ;; # Anything else should be a program.
5107     esac
5108
5109     specialdeplibs=
5110
5111     libs=
5112     # Find all interdependent deplibs by searching for libraries
5113     # that are linked more than once (e.g. -la -lb -la)
5114     for deplib in $deplibs; do
5115       if $opt_duplicate_deps ; then
5116         case "$libs " in
5117         *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
5118         esac
5119       fi
5120       libs="$libs $deplib"
5121     done
5122
5123     if test "$linkmode" = lib; then
5124       libs="$predeps $libs $compiler_lib_search_path $postdeps"
5125
5126       # Compute libraries that are listed more than once in $predeps
5127       # $postdeps and mark them as special (i.e., whose duplicates are
5128       # not to be eliminated).
5129       pre_post_deps=
5130       if $opt_duplicate_compiler_generated_deps; then
5131         for pre_post_dep in $predeps $postdeps; do
5132           case "$pre_post_deps " in
5133           *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
5134           esac
5135           pre_post_deps="$pre_post_deps $pre_post_dep"
5136         done
5137       fi
5138       pre_post_deps=
5139     fi
5140
5141     deplibs=
5142     newdependency_libs=
5143     newlib_search_path=
5144     need_relink=no # whether we're linking any uninstalled libtool libraries
5145     notinst_deplibs= # not-installed libtool libraries
5146     notinst_path= # paths that contain not-installed libtool libraries
5147
5148     case $linkmode in
5149     lib)
5150         passes="conv dlpreopen link"
5151         for file in $dlfiles $dlprefiles; do
5152           case $file in
5153           *.la) ;;
5154           *)
5155             func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
5156             ;;
5157           esac
5158         done
5159         ;;
5160     prog)
5161         compile_deplibs=
5162         finalize_deplibs=
5163         alldeplibs=no
5164         newdlfiles=
5165         newdlprefiles=
5166         passes="conv scan dlopen dlpreopen link"
5167         ;;
5168     *)  passes="conv"
5169         ;;
5170     esac
5171
5172     for pass in $passes; do
5173       # The preopen pass in lib mode reverses $deplibs; put it back here
5174       # so that -L comes before libs that need it for instance...
5175       if test "$linkmode,$pass" = "lib,link"; then
5176         ## FIXME: Find the place where the list is rebuilt in the wrong
5177         ##        order, and fix it there properly
5178         tmp_deplibs=
5179         for deplib in $deplibs; do
5180           tmp_deplibs="$deplib $tmp_deplibs"
5181         done
5182         deplibs="$tmp_deplibs"
5183       fi
5184
5185       if test "$linkmode,$pass" = "lib,link" ||
5186          test "$linkmode,$pass" = "prog,scan"; then
5187         libs="$deplibs"
5188         deplibs=
5189       fi
5190       if test "$linkmode" = prog; then
5191         case $pass in
5192         dlopen) libs="$dlfiles" ;;
5193         dlpreopen) libs="$dlprefiles" ;;
5194         link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
5195         esac
5196       fi
5197       if test "$linkmode,$pass" = "lib,dlpreopen"; then
5198         # Collect and forward deplibs of preopened libtool libs
5199         for lib in $dlprefiles; do
5200           # Ignore non-libtool-libs
5201           dependency_libs=
5202           case $lib in
5203           *.la) func_source "$lib" ;;
5204           esac
5205
5206           # Collect preopened libtool deplibs, except any this library
5207           # has declared as weak libs
5208           for deplib in $dependency_libs; do
5209             deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
5210             case " $weak_libs " in
5211             *" $deplib_base "*) ;;
5212             *) deplibs="$deplibs $deplib" ;;
5213             esac
5214           done
5215         done
5216         libs="$dlprefiles"
5217       fi
5218       if test "$pass" = dlopen; then
5219         # Collect dlpreopened libraries
5220         save_deplibs="$deplibs"
5221         deplibs=
5222       fi
5223
5224       for deplib in $libs; do
5225         lib=
5226         found=no
5227         case $deplib in
5228         -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
5229           if test "$linkmode,$pass" = "prog,link"; then
5230             compile_deplibs="$deplib $compile_deplibs"
5231             finalize_deplibs="$deplib $finalize_deplibs"
5232           else
5233             compiler_flags="$compiler_flags $deplib"
5234             if test "$linkmode" = lib ; then
5235                 case "$new_inherited_linker_flags " in
5236                     *" $deplib "*) ;;
5237                     * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
5238                 esac
5239             fi
5240           fi
5241           continue
5242           ;;
5243         -l*)
5244           if test "$linkmode" != lib && test "$linkmode" != prog; then
5245             func_warning "\`-l' is ignored for archives/objects"
5246             continue
5247           fi
5248           func_stripname '-l' '' "$deplib"
5249           name=$func_stripname_result
5250           if test "$linkmode" = lib; then
5251             searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
5252           else
5253             searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
5254           fi
5255           for searchdir in $searchdirs; do
5256             for search_ext in .la $std_shrext .so .a; do
5257               # Search the libtool library
5258               lib="$searchdir/lib${name}${search_ext}"
5259               if test -f "$lib"; then
5260                 if test "$search_ext" = ".la"; then
5261                   found=yes
5262                 else
5263                   found=no
5264                 fi
5265                 break 2
5266               fi
5267             done
5268           done
5269           if test "$found" != yes; then
5270             # deplib doesn't seem to be a libtool library
5271             if test "$linkmode,$pass" = "prog,link"; then
5272               compile_deplibs="$deplib $compile_deplibs"
5273               finalize_deplibs="$deplib $finalize_deplibs"
5274             else
5275               deplibs="$deplib $deplibs"
5276               test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
5277             fi
5278             continue
5279           else # deplib is a libtool library
5280             # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
5281             # We need to do some special things here, and not later.
5282             if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
5283               case " $predeps $postdeps " in
5284               *" $deplib "*)
5285                 if func_lalib_p "$lib"; then
5286                   library_names=
5287                   old_library=
5288                   func_source "$lib"
5289                   for l in $old_library $library_names; do
5290                     ll="$l"
5291                   done
5292                   if test "X$ll" = "X$old_library" ; then # only static version available
5293                     found=no
5294                     func_dirname "$lib" "" "."
5295                     ladir="$func_dirname_result"
5296                     lib=$ladir/$old_library
5297                     if test "$linkmode,$pass" = "prog,link"; then
5298                       compile_deplibs="$deplib $compile_deplibs"
5299                       finalize_deplibs="$deplib $finalize_deplibs"
5300                     else
5301                       deplibs="$deplib $deplibs"
5302                       test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
5303                     fi
5304                     continue
5305                   fi
5306                 fi
5307                 ;;
5308               *) ;;
5309               esac
5310             fi
5311           fi
5312           ;; # -l
5313         *.ltframework)
5314           if test "$linkmode,$pass" = "prog,link"; then
5315             compile_deplibs="$deplib $compile_deplibs"
5316             finalize_deplibs="$deplib $finalize_deplibs"
5317           else
5318             deplibs="$deplib $deplibs"
5319             if test "$linkmode" = lib ; then
5320                 case "$new_inherited_linker_flags " in
5321                     *" $deplib "*) ;;
5322                     * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
5323                 esac
5324             fi
5325           fi
5326           continue
5327           ;;
5328         -L*)
5329           case $linkmode in
5330           lib)
5331             deplibs="$deplib $deplibs"
5332             test "$pass" = conv && continue
5333             newdependency_libs="$deplib $newdependency_libs"
5334             func_stripname '-L' '' "$deplib"
5335             newlib_search_path="$newlib_search_path $func_stripname_result"
5336             ;;
5337           prog)
5338             if test "$pass" = conv; then
5339               deplibs="$deplib $deplibs"
5340               continue
5341             fi
5342             if test "$pass" = scan; then
5343               deplibs="$deplib $deplibs"
5344             else
5345               compile_deplibs="$deplib $compile_deplibs"
5346               finalize_deplibs="$deplib $finalize_deplibs"
5347             fi
5348             func_stripname '-L' '' "$deplib"
5349             newlib_search_path="$newlib_search_path $func_stripname_result"
5350             ;;
5351           *)
5352             func_warning "\`-L' is ignored for archives/objects"
5353             ;;
5354           esac # linkmode
5355           continue
5356           ;; # -L
5357         -R*)
5358           if test "$pass" = link; then
5359             func_stripname '-R' '' "$deplib"
5360             dir=$func_stripname_result
5361             # Make sure the xrpath contains only unique directories.
5362             case "$xrpath " in
5363             *" $dir "*) ;;
5364             *) xrpath="$xrpath $dir" ;;
5365             esac
5366           fi
5367           deplibs="$deplib $deplibs"
5368           continue
5369           ;;
5370         *.la) lib="$deplib" ;;
5371         *.$libext)
5372           if test "$pass" = conv; then
5373             deplibs="$deplib $deplibs"
5374             continue
5375           fi
5376           case $linkmode in
5377           lib)
5378             # Linking convenience modules into shared libraries is allowed,
5379             # but linking other static libraries is non-portable.
5380             case " $dlpreconveniencelibs " in
5381             *" $deplib "*) ;;
5382             *)
5383               valid_a_lib=no
5384               case $deplibs_check_method in
5385                 match_pattern*)
5386                   set dummy $deplibs_check_method; shift
5387                   match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
5388                   if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
5389                     | $EGREP "$match_pattern_regex" > /dev/null; then
5390                     valid_a_lib=yes
5391                   fi
5392                 ;;
5393                 pass_all)
5394                   valid_a_lib=yes
5395                 ;;
5396               esac
5397               if test "$valid_a_lib" != yes; then
5398                 $ECHO
5399                 $ECHO "*** Warning: Trying to link with static lib archive $deplib."
5400                 $ECHO "*** I have the capability to make that library automatically link in when"
5401                 $ECHO "*** you link to this library.  But I can only do this if you have a"
5402                 $ECHO "*** shared version of the library, which you do not appear to have"
5403                 $ECHO "*** because the file extensions .$libext of this argument makes me believe"
5404                 $ECHO "*** that it is just a static archive that I should not use here."
5405               else
5406                 $ECHO
5407                 $ECHO "*** Warning: Linking the shared library $output against the"
5408                 $ECHO "*** static library $deplib is not portable!"
5409                 deplibs="$deplib $deplibs"
5410               fi
5411               ;;
5412             esac
5413             continue
5414             ;;
5415           prog)
5416             if test "$pass" != link; then
5417               deplibs="$deplib $deplibs"
5418             else
5419               compile_deplibs="$deplib $compile_deplibs"
5420               finalize_deplibs="$deplib $finalize_deplibs"
5421             fi
5422             continue
5423             ;;
5424           esac # linkmode
5425           ;; # *.$libext
5426         *.lo | *.$objext)
5427           if test "$pass" = conv; then
5428             deplibs="$deplib $deplibs"
5429           elif test "$linkmode" = prog; then
5430             if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
5431               # If there is no dlopen support or we're linking statically,
5432               # we need to preload.
5433               newdlprefiles="$newdlprefiles $deplib"
5434               compile_deplibs="$deplib $compile_deplibs"
5435               finalize_deplibs="$deplib $finalize_deplibs"
5436             else
5437               newdlfiles="$newdlfiles $deplib"
5438             fi
5439           fi
5440           continue
5441           ;;
5442         %DEPLIBS%)
5443           alldeplibs=yes
5444           continue
5445           ;;
5446         esac # case $deplib
5447
5448         if test "$found" = yes || test -f "$lib"; then :
5449         else
5450           func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
5451         fi
5452
5453         # Check to see that this really is a libtool archive.
5454         func_lalib_unsafe_p "$lib" \
5455           || func_fatal_error "\`$lib' is not a valid libtool archive"
5456
5457         func_dirname "$lib" "" "."
5458         ladir="$func_dirname_result"
5459
5460         dlname=
5461         dlopen=
5462         dlpreopen=
5463         libdir=
5464         library_names=
5465         old_library=
5466         inherited_linker_flags=
5467         # If the library was installed with an old release of libtool,
5468         # it will not redefine variables installed, or shouldnotlink
5469         installed=yes
5470         shouldnotlink=no
5471         avoidtemprpath=
5472
5473
5474         # Read the .la file
5475         func_source "$lib"
5476
5477         # Convert "-framework foo" to "foo.ltframework"
5478         if test -n "$inherited_linker_flags"; then
5479           tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
5480           for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
5481             case " $new_inherited_linker_flags " in
5482               *" $tmp_inherited_linker_flag "*) ;;
5483               *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
5484             esac
5485           done
5486         fi
5487         dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
5488         if test "$linkmode,$pass" = "lib,link" ||
5489            test "$linkmode,$pass" = "prog,scan" ||
5490            { test "$linkmode" != prog && test "$linkmode" != lib; }; then
5491           test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
5492           test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
5493         fi
5494
5495         if test "$pass" = conv; then
5496           # Only check for convenience libraries
5497           deplibs="$lib $deplibs"
5498           if test -z "$libdir"; then
5499             if test -z "$old_library"; then
5500               func_fatal_error "cannot find name of link library for \`$lib'"
5501             fi
5502             # It is a libtool convenience library, so add in its objects.
5503             convenience="$convenience $ladir/$objdir/$old_library"
5504             old_convenience="$old_convenience $ladir/$objdir/$old_library"
5505           elif test "$linkmode" != prog && test "$linkmode" != lib; then
5506             func_fatal_error "\`$lib' is not a convenience library"
5507           fi
5508           tmp_libs=
5509           for deplib in $dependency_libs; do
5510             deplibs="$deplib $deplibs"
5511             if $opt_duplicate_deps ; then
5512               case "$tmp_libs " in
5513               *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
5514               esac
5515             fi
5516             tmp_libs="$tmp_libs $deplib"
5517           done
5518           continue
5519         fi # $pass = conv
5520
5521
5522         # Get the name of the library we link against.
5523         linklib=
5524         for l in $old_library $library_names; do
5525           linklib="$l"
5526         done
5527         if test -z "$linklib"; then
5528           func_fatal_error "cannot find name of link library for \`$lib'"
5529         fi
5530
5531         # This library was specified with -dlopen.
5532         if test "$pass" = dlopen; then
5533           if test -z "$libdir"; then
5534             func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
5535           fi
5536           if test -z "$dlname" ||
5537              test "$dlopen_support" != yes ||
5538              test "$build_libtool_libs" = no; then
5539             # If there is no dlname, no dlopen support or we're linking
5540             # statically, we need to preload.  We also need to preload any
5541             # dependent libraries so libltdl's deplib preloader doesn't
5542             # bomb out in the load deplibs phase.
5543             dlprefiles="$dlprefiles $lib $dependency_libs"
5544           else
5545             newdlfiles="$newdlfiles $lib"
5546           fi
5547           continue
5548         fi # $pass = dlopen
5549
5550         # We need an absolute path.
5551         case $ladir in
5552         [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
5553         *)
5554           abs_ladir=`cd "$ladir" && pwd`
5555           if test -z "$abs_ladir"; then
5556             func_warning "cannot determine absolute directory name of \`$ladir'"
5557             func_warning "passing it literally to the linker, although it might fail"
5558             abs_ladir="$ladir"
5559           fi
5560           ;;
5561         esac
5562         func_basename "$lib"
5563         laname="$func_basename_result"
5564
5565         # Find the relevant object directory and library name.
5566         if test "X$installed" = Xyes; then
5567           if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
5568             func_warning "library \`$lib' was moved."
5569             dir="$ladir"
5570             absdir="$abs_ladir"
5571             libdir="$abs_ladir"
5572           else
5573             dir="$libdir"
5574             absdir="$libdir"
5575           fi
5576           test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
5577         else
5578           if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
5579             dir="$ladir"
5580             absdir="$abs_ladir"
5581             # Remove this search path later
5582             notinst_path="$notinst_path $abs_ladir"
5583           else
5584             dir="$ladir/$objdir"
5585             absdir="$abs_ladir/$objdir"
5586             # Remove this search path later
5587             notinst_path="$notinst_path $abs_ladir"
5588           fi
5589         fi # $installed = yes
5590         func_stripname 'lib' '.la' "$laname"
5591         name=$func_stripname_result
5592
5593         # This library was specified with -dlpreopen.
5594         if test "$pass" = dlpreopen; then
5595           if test -z "$libdir" && test "$linkmode" = prog; then
5596             func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
5597           fi
5598           # Prefer using a static library (so that no silly _DYNAMIC symbols
5599           # are required to link).
5600           if test -n "$old_library"; then
5601             newdlprefiles="$newdlprefiles $dir/$old_library"
5602             # Keep a list of preopened convenience libraries to check
5603             # that they are being used correctly in the link pass.
5604             test -z "$libdir" && \
5605                 dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
5606           # Otherwise, use the dlname, so that lt_dlopen finds it.
5607           elif test -n "$dlname"; then
5608             newdlprefiles="$newdlprefiles $dir/$dlname"
5609           else
5610             newdlprefiles="$newdlprefiles $dir/$linklib"
5611           fi
5612         fi # $pass = dlpreopen
5613
5614         if test -z "$libdir"; then
5615           # Link the convenience library
5616           if test "$linkmode" = lib; then
5617             deplibs="$dir/$old_library $deplibs"
5618           elif test "$linkmode,$pass" = "prog,link"; then
5619             compile_deplibs="$dir/$old_library $compile_deplibs"
5620             finalize_deplibs="$dir/$old_library $finalize_deplibs"
5621           else
5622             deplibs="$lib $deplibs" # used for prog,scan pass
5623           fi
5624           continue
5625         fi
5626
5627
5628         if test "$linkmode" = prog && test "$pass" != link; then
5629           newlib_search_path="$newlib_search_path $ladir"
5630           deplibs="$lib $deplibs"
5631
5632           linkalldeplibs=no
5633           if test "$link_all_deplibs" != no || test -z "$library_names" ||
5634              test "$build_libtool_libs" = no; then
5635             linkalldeplibs=yes
5636           fi
5637
5638           tmp_libs=
5639           for deplib in $dependency_libs; do
5640             case $deplib in
5641             -L*) func_stripname '-L' '' "$deplib"
5642                  newlib_search_path="$newlib_search_path $func_stripname_result"
5643                  ;;
5644             esac
5645             # Need to link against all dependency_libs?
5646             if test "$linkalldeplibs" = yes; then
5647               deplibs="$deplib $deplibs"
5648             else
5649               # Need to hardcode shared library paths
5650               # or/and link against static libraries
5651               newdependency_libs="$deplib $newdependency_libs"
5652             fi
5653             if $opt_duplicate_deps ; then
5654               case "$tmp_libs " in
5655               *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
5656               esac
5657             fi
5658             tmp_libs="$tmp_libs $deplib"
5659           done # for deplib
5660           continue
5661         fi # $linkmode = prog...
5662
5663         if test "$linkmode,$pass" = "prog,link"; then
5664           if test -n "$library_names" &&
5665              { { test "$prefer_static_libs" = no ||
5666                  test "$prefer_static_libs,$installed" = "built,yes"; } ||
5667                test -z "$old_library"; }; then
5668             # We need to hardcode the library path
5669             if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
5670               # Make sure the rpath contains only unique directories.
5671               case "$temp_rpath:" in
5672               *"$absdir:"*) ;;
5673               *) temp_rpath="$temp_rpath$absdir:" ;;
5674               esac
5675             fi
5676
5677             # Hardcode the library path.
5678             # Skip directories that are in the system default run-time
5679             # search path.
5680             case " $sys_lib_dlsearch_path " in
5681             *" $absdir "*) ;;
5682             *)
5683               case "$compile_rpath " in
5684               *" $absdir "*) ;;
5685               *) compile_rpath="$compile_rpath $absdir"
5686               esac
5687               ;;
5688             esac
5689             case " $sys_lib_dlsearch_path " in
5690             *" $libdir "*) ;;
5691             *)
5692               case "$finalize_rpath " in
5693               *" $libdir "*) ;;
5694               *) finalize_rpath="$finalize_rpath $libdir"
5695               esac
5696               ;;
5697             esac
5698           fi # $linkmode,$pass = prog,link...
5699
5700           if test "$alldeplibs" = yes &&
5701              { test "$deplibs_check_method" = pass_all ||
5702                { test "$build_libtool_libs" = yes &&
5703                  test -n "$library_names"; }; }; then
5704             # We only need to search for static libraries
5705             continue
5706           fi
5707         fi
5708
5709         link_static=no # Whether the deplib will be linked statically
5710         use_static_libs=$prefer_static_libs
5711         if test "$use_static_libs" = built && test "$installed" = yes; then
5712           use_static_libs=no
5713         fi
5714         if test -n "$library_names" &&
5715            { test "$use_static_libs" = no || test -z "$old_library"; }; then
5716           case $host in
5717           *cygwin* | *mingw* | *cegcc*)
5718               # No point in relinking DLLs because paths are not encoded
5719               notinst_deplibs="$notinst_deplibs $lib"
5720               need_relink=no
5721             ;;
5722           *)
5723             if test "$installed" = no; then
5724               notinst_deplibs="$notinst_deplibs $lib"
5725               need_relink=yes
5726             fi
5727             ;;
5728           esac
5729           # This is a shared library
5730
5731           # Warn about portability, can't link against -module's on some
5732           # systems (darwin).  Don't bleat about dlopened modules though!
5733           dlopenmodule=""
5734           for dlpremoduletest in $dlprefiles; do
5735             if test "X$dlpremoduletest" = "X$lib"; then
5736               dlopenmodule="$dlpremoduletest"
5737               break
5738             fi
5739           done
5740           if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
5741             $ECHO
5742             if test "$linkmode" = prog; then
5743               $ECHO "*** Warning: Linking the executable $output against the loadable module"
5744             else
5745               $ECHO "*** Warning: Linking the shared library $output against the loadable module"
5746             fi
5747             $ECHO "*** $linklib is not portable!"
5748           fi
5749           if test "$linkmode" = lib &&
5750              test "$hardcode_into_libs" = yes; then
5751             # Hardcode the library path.
5752             # Skip directories that are in the system default run-time
5753             # search path.
5754             case " $sys_lib_dlsearch_path " in
5755             *" $absdir "*) ;;
5756             *)
5757               case "$compile_rpath " in
5758               *" $absdir "*) ;;
5759               *) compile_rpath="$compile_rpath $absdir"
5760               esac
5761               ;;
5762             esac
5763             case " $sys_lib_dlsearch_path " in
5764             *" $libdir "*) ;;
5765             *)
5766               case "$finalize_rpath " in
5767               *" $libdir "*) ;;
5768               *) finalize_rpath="$finalize_rpath $libdir"
5769               esac
5770               ;;
5771             esac
5772           fi
5773
5774           if test -n "$old_archive_from_expsyms_cmds"; then
5775             # figure out the soname
5776             set dummy $library_names
5777             shift
5778             realname="$1"
5779             shift
5780             libname=`eval "\\$ECHO \"$libname_spec\""`
5781             # use dlname if we got it. it's perfectly good, no?
5782             if test -n "$dlname"; then
5783               soname="$dlname"
5784             elif test -n "$soname_spec"; then
5785               # bleh windows
5786               case $host in
5787               *cygwin* | mingw* | *cegcc*)
5788                 func_arith $current - $age
5789                 major=$func_arith_result
5790                 versuffix="-$major"
5791                 ;;
5792               esac
5793               eval soname=\"$soname_spec\"
5794             else
5795               soname="$realname"
5796             fi
5797
5798             # Make a new name for the extract_expsyms_cmds to use
5799             soroot="$soname"
5800             func_basename "$soroot"
5801             soname="$func_basename_result"
5802             func_stripname 'lib' '.dll' "$soname"
5803             newlib=libimp-$func_stripname_result.a
5804
5805             # If the library has no export list, then create one now
5806             if test -f "$output_objdir/$soname-def"; then :
5807             else
5808               func_verbose "extracting exported symbol list from \`$soname'"
5809               func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
5810             fi
5811
5812             # Create $newlib
5813             if test -f "$output_objdir/$newlib"; then :; else
5814               func_verbose "generating import library for \`$soname'"
5815               func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
5816             fi
5817             # make sure the library variables are pointing to the new library
5818             dir=$output_objdir
5819             linklib=$newlib
5820           fi # test -n "$old_archive_from_expsyms_cmds"
5821
5822           if test "$linkmode" = prog || test "$mode" != relink; then
5823             add_shlibpath=
5824             add_dir=
5825             add=
5826             lib_linked=yes
5827             case $hardcode_action in
5828             immediate | unsupported)
5829               if test "$hardcode_direct" = no; then
5830                 add="$dir/$linklib"
5831                 case $host in
5832                   *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
5833                   *-*-sysv4*uw2*) add_dir="-L$dir" ;;
5834                   *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
5835                     *-*-unixware7*) add_dir="-L$dir" ;;
5836                   *-*-darwin* )
5837                     # if the lib is a (non-dlopened) module then we can not
5838                     # link against it, someone is ignoring the earlier warnings
5839                     if /usr/bin/file -L $add 2> /dev/null |
5840                          $GREP ": [^:]* bundle" >/dev/null ; then
5841                       if test "X$dlopenmodule" != "X$lib"; then
5842                         $ECHO "*** Warning: lib $linklib is a module, not a shared library"
5843                         if test -z "$old_library" ; then
5844                           $ECHO
5845                           $ECHO "*** And there doesn't seem to be a static archive available"
5846                           $ECHO "*** The link will probably fail, sorry"
5847                         else
5848                           add="$dir/$old_library"
5849                         fi
5850                       elif test -n "$old_library"; then
5851                         add="$dir/$old_library"
5852                       fi
5853                     fi
5854                 esac
5855               elif test "$hardcode_minus_L" = no; then
5856                 case $host in
5857                 *-*-sunos*) add_shlibpath="$dir" ;;
5858                 esac
5859                 add_dir="-L$dir"
5860                 add="-l$name"
5861               elif test "$hardcode_shlibpath_var" = no; then
5862                 add_shlibpath="$dir"
5863                 add="-l$name"
5864               else
5865                 lib_linked=no
5866               fi
5867               ;;
5868             relink)
5869               if test "$hardcode_direct" = yes &&
5870                  test "$hardcode_direct_absolute" = no; then
5871                 add="$dir/$linklib"
5872               elif test "$hardcode_minus_L" = yes; then
5873                 add_dir="-L$dir"
5874                 # Try looking first in the location we're being installed to.
5875                 if test -n "$inst_prefix_dir"; then
5876                   case $libdir in
5877                     [\\/]*)
5878                       add_dir="$add_dir -L$inst_prefix_dir$libdir"
5879                       ;;
5880                   esac
5881                 fi
5882                 add="-l$name"
5883               elif test "$hardcode_shlibpath_var" = yes; then
5884                 add_shlibpath="$dir"
5885                 add="-l$name"
5886               else
5887                 lib_linked=no
5888               fi
5889               ;;
5890             *) lib_linked=no ;;
5891             esac
5892
5893             if test "$lib_linked" != yes; then
5894               func_fatal_configuration "unsupported hardcode properties"
5895             fi
5896
5897             if test -n "$add_shlibpath"; then
5898               case :$compile_shlibpath: in
5899               *":$add_shlibpath:"*) ;;
5900               *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
5901               esac
5902             fi
5903             if test "$linkmode" = prog; then
5904               test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
5905               test -n "$add" && compile_deplibs="$add $compile_deplibs"
5906             else
5907               test -n "$add_dir" && deplibs="$add_dir $deplibs"
5908               test -n "$add" && deplibs="$add $deplibs"
5909               if test "$hardcode_direct" != yes &&
5910                  test "$hardcode_minus_L" != yes &&
5911                  test "$hardcode_shlibpath_var" = yes; then
5912                 case :$finalize_shlibpath: in
5913                 *":$libdir:"*) ;;
5914                 *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
5915                 esac
5916               fi
5917             fi
5918           fi
5919
5920           if test "$linkmode" = prog || test "$mode" = relink; then
5921             add_shlibpath=
5922             add_dir=
5923             add=
5924             # Finalize command for both is simple: just hardcode it.
5925             if test "$hardcode_direct" = yes &&
5926                test "$hardcode_direct_absolute" = no; then
5927               add="$libdir/$linklib"
5928             elif test "$hardcode_minus_L" = yes; then
5929               add_dir="-L$libdir"
5930               add="-l$name"
5931             elif test "$hardcode_shlibpath_var" = yes; then
5932               case :$finalize_shlibpath: in
5933               *":$libdir:"*) ;;
5934               *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
5935               esac
5936               add="-l$name"
5937             elif test "$hardcode_automatic" = yes; then
5938               if test -n "$inst_prefix_dir" &&
5939                  test -f "$inst_prefix_dir$libdir/$linklib" ; then
5940                 add="$inst_prefix_dir$libdir/$linklib"
5941               else
5942                 add="$libdir/$linklib"
5943               fi
5944             else
5945               # We cannot seem to hardcode it, guess we'll fake it.
5946               add_dir="-L$libdir"
5947               # Try looking first in the location we're being installed to.
5948               if test -n "$inst_prefix_dir"; then
5949                 case $libdir in
5950                   [\\/]*)
5951                     add_dir="$add_dir -L$inst_prefix_dir$libdir"
5952                     ;;
5953                 esac
5954               fi
5955               add="-l$name"
5956             fi
5957
5958             if test "$linkmode" = prog; then
5959               test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
5960               test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
5961             else
5962               test -n "$add_dir" && deplibs="$add_dir $deplibs"
5963               test -n "$add" && deplibs="$add $deplibs"
5964             fi
5965           fi
5966         elif test "$linkmode" = prog; then
5967           # Here we assume that one of hardcode_direct or hardcode_minus_L
5968           # is not unsupported.  This is valid on all known static and
5969           # shared platforms.
5970           if test "$hardcode_direct" != unsupported; then
5971             test -n "$old_library" && linklib="$old_library"
5972             compile_deplibs="$dir/$linklib $compile_deplibs"
5973             finalize_deplibs="$dir/$linklib $finalize_deplibs"
5974           else
5975             compile_deplibs="-l$name -L$dir $compile_deplibs"
5976             finalize_deplibs="-l$name -L$dir $finalize_deplibs"
5977           fi
5978         elif test "$build_libtool_libs" = yes; then
5979           # Not a shared library
5980           if test "$deplibs_check_method" != pass_all; then
5981             # We're trying link a shared library against a static one
5982             # but the system doesn't support it.
5983
5984             # Just print a warning and add the library to dependency_libs so
5985             # that the program can be linked against the static library.
5986             $ECHO
5987             $ECHO "*** Warning: This system can not link to static lib archive $lib."
5988             $ECHO "*** I have the capability to make that library automatically link in when"
5989             $ECHO "*** you link to this library.  But I can only do this if you have a"
5990             $ECHO "*** shared version of the library, which you do not appear to have."
5991             if test "$module" = yes; then
5992               $ECHO "*** But as you try to build a module library, libtool will still create "
5993               $ECHO "*** a static module, that should work as long as the dlopening application"
5994               $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
5995               if test -z "$global_symbol_pipe"; then
5996                 $ECHO
5997                 $ECHO "*** However, this would only work if libtool was able to extract symbol"
5998                 $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
5999                 $ECHO "*** not find such a program.  So, this module is probably useless."
6000                 $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
6001               fi
6002               if test "$build_old_libs" = no; then
6003                 build_libtool_libs=module
6004                 build_old_libs=yes
6005               else
6006                 build_libtool_libs=no
6007               fi
6008             fi
6009           else
6010             deplibs="$dir/$old_library $deplibs"
6011             link_static=yes
6012           fi
6013         fi # link shared/static library?
6014
6015         if test "$linkmode" = lib; then
6016           if test -n "$dependency_libs" &&
6017              { test "$hardcode_into_libs" != yes ||
6018                test "$build_old_libs" = yes ||
6019                test "$link_static" = yes; }; then
6020             # Extract -R from dependency_libs
6021             temp_deplibs=
6022             for libdir in $dependency_libs; do
6023               case $libdir in
6024               -R*) func_stripname '-R' '' "$libdir"
6025                    temp_xrpath=$func_stripname_result
6026                    case " $xrpath " in
6027                    *" $temp_xrpath "*) ;;
6028                    *) xrpath="$xrpath $temp_xrpath";;
6029                    esac;;
6030               *) temp_deplibs="$temp_deplibs $libdir";;
6031               esac
6032             done
6033             dependency_libs="$temp_deplibs"
6034           fi
6035
6036           newlib_search_path="$newlib_search_path $absdir"
6037           # Link against this library
6038           test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
6039           # ... and its dependency_libs
6040           tmp_libs=
6041           for deplib in $dependency_libs; do
6042             newdependency_libs="$deplib $newdependency_libs"
6043             if $opt_duplicate_deps ; then
6044               case "$tmp_libs " in
6045               *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
6046               esac
6047             fi
6048             tmp_libs="$tmp_libs $deplib"
6049           done
6050
6051           if test "$link_all_deplibs" != no; then
6052             # Add the search paths of all dependency libraries
6053             for deplib in $dependency_libs; do
6054               case $deplib in
6055               -L*) path="$deplib" ;;
6056               *.la)
6057                 func_dirname "$deplib" "" "."
6058                 dir="$func_dirname_result"
6059                 # We need an absolute path.
6060                 case $dir in
6061                 [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
6062                 *)
6063                   absdir=`cd "$dir" && pwd`
6064                   if test -z "$absdir"; then
6065                     func_warning "cannot determine absolute directory name of \`$dir'"
6066                     absdir="$dir"
6067                   fi
6068                   ;;
6069                 esac
6070                 if $GREP "^installed=no" $deplib > /dev/null; then
6071                 case $host in
6072                 *-*-darwin*)
6073                   depdepl=
6074                   eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
6075                   if test -n "$deplibrary_names" ; then
6076                     for tmp in $deplibrary_names ; do
6077                       depdepl=$tmp
6078                     done
6079                     if test -f "$absdir/$objdir/$depdepl" ; then
6080                       depdepl="$absdir/$objdir/$depdepl"
6081                       darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
6082                       if test -z "$darwin_install_name"; then
6083                           darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
6084                       fi
6085                       compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
6086                       linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
6087                       path=
6088                     fi
6089                   fi
6090                   ;;
6091                 *)
6092                   path="-L$absdir/$objdir"
6093                   ;;
6094                 esac
6095                 else
6096                   eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
6097                   test -z "$libdir" && \
6098                     func_fatal_error "\`$deplib' is not a valid libtool archive"
6099                   test "$absdir" != "$libdir" && \
6100                     func_warning "\`$deplib' seems to be moved"
6101
6102                   path="-L$absdir"
6103                 fi
6104                 ;;
6105               esac
6106               case " $deplibs " in
6107               *" $path "*) ;;
6108               *) deplibs="$path $deplibs" ;;
6109               esac
6110             done
6111           fi # link_all_deplibs != no
6112         fi # linkmode = lib
6113       done # for deplib in $libs
6114       if test "$pass" = link; then
6115         if test "$linkmode" = "prog"; then
6116           compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
6117           finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
6118         else
6119           compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
6120         fi
6121       fi
6122       dependency_libs="$newdependency_libs"
6123       if test "$pass" = dlpreopen; then
6124         # Link the dlpreopened libraries before other libraries
6125         for deplib in $save_deplibs; do
6126           deplibs="$deplib $deplibs"
6127         done
6128       fi
6129       if test "$pass" != dlopen; then
6130         if test "$pass" != conv; then
6131           # Make sure lib_search_path contains only unique directories.
6132           lib_search_path=
6133           for dir in $newlib_search_path; do
6134             case "$lib_search_path " in
6135             *" $dir "*) ;;
6136             *) lib_search_path="$lib_search_path $dir" ;;
6137             esac
6138           done
6139           newlib_search_path=
6140         fi
6141
6142         if test "$linkmode,$pass" != "prog,link"; then
6143           vars="deplibs"
6144         else
6145           vars="compile_deplibs finalize_deplibs"
6146         fi
6147         for var in $vars dependency_libs; do
6148           # Add libraries to $var in reverse order
6149           eval tmp_libs=\"\$$var\"
6150           new_libs=
6151           for deplib in $tmp_libs; do
6152             # FIXME: Pedantically, this is the right thing to do, so
6153             #        that some nasty dependency loop isn't accidentally
6154             #        broken:
6155             #new_libs="$deplib $new_libs"
6156             # Pragmatically, this seems to cause very few problems in
6157             # practice:
6158             case $deplib in
6159             -L*) new_libs="$deplib $new_libs" ;;
6160             -R*) ;;
6161             *)
6162               # And here is the reason: when a library appears more
6163               # than once as an explicit dependence of a library, or
6164               # is implicitly linked in more than once by the
6165               # compiler, it is considered special, and multiple
6166               # occurrences thereof are not removed.  Compare this
6167               # with having the same library being listed as a
6168               # dependency of multiple other libraries: in this case,
6169               # we know (pedantically, we assume) the library does not
6170               # need to be listed more than once, so we keep only the
6171               # last copy.  This is not always right, but it is rare
6172               # enough that we require users that really mean to play
6173               # such unportable linking tricks to link the library
6174               # using -Wl,-lname, so that libtool does not consider it
6175               # for duplicate removal.
6176               case " $specialdeplibs " in
6177               *" $deplib "*) new_libs="$deplib $new_libs" ;;
6178               *)
6179                 case " $new_libs " in
6180                 *" $deplib "*) ;;
6181                 *) new_libs="$deplib $new_libs" ;;
6182                 esac
6183                 ;;
6184               esac
6185               ;;
6186             esac
6187           done
6188           tmp_libs=
6189           for deplib in $new_libs; do
6190             case $deplib in
6191             -L*)
6192               case " $tmp_libs " in
6193               *" $deplib "*) ;;
6194               *) tmp_libs="$tmp_libs $deplib" ;;
6195               esac
6196               ;;
6197             *) tmp_libs="$tmp_libs $deplib" ;;
6198             esac
6199           done
6200           eval $var=\"$tmp_libs\"
6201         done # for var
6202       fi
6203       # Last step: remove runtime libs from dependency_libs
6204       # (they stay in deplibs)
6205       tmp_libs=
6206       for i in $dependency_libs ; do
6207         case " $predeps $postdeps $compiler_lib_search_path " in
6208         *" $i "*)
6209           i=""
6210           ;;
6211         esac
6212         if test -n "$i" ; then
6213           tmp_libs="$tmp_libs $i"
6214         fi
6215       done
6216       dependency_libs=$tmp_libs
6217     done # for pass
6218     if test "$linkmode" = prog; then
6219       dlfiles="$newdlfiles"
6220     fi
6221     if test "$linkmode" = prog || test "$linkmode" = lib; then
6222       dlprefiles="$newdlprefiles"
6223     fi
6224
6225     case $linkmode in
6226     oldlib)
6227       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
6228         func_warning "\`-dlopen' is ignored for archives"
6229       fi
6230
6231       case " $deplibs" in
6232       *\ -l* | *\ -L*)
6233         func_warning "\`-l' and \`-L' are ignored for archives" ;;
6234       esac
6235
6236       test -n "$rpath" && \
6237         func_warning "\`-rpath' is ignored for archives"
6238
6239       test -n "$xrpath" && \
6240         func_warning "\`-R' is ignored for archives"
6241
6242       test -n "$vinfo" && \
6243         func_warning "\`-version-info/-version-number' is ignored for archives"
6244
6245       test -n "$release" && \
6246         func_warning "\`-release' is ignored for archives"
6247
6248       test -n "$export_symbols$export_symbols_regex" && \
6249         func_warning "\`-export-symbols' is ignored for archives"
6250
6251       # Now set the variables for building old libraries.
6252       build_libtool_libs=no
6253       oldlibs="$output"
6254       objs="$objs$old_deplibs"
6255       ;;
6256
6257     lib)
6258       # Make sure we only generate libraries of the form `libNAME.la'.
6259       case $outputname in
6260       lib*)
6261         func_stripname 'lib' '.la' "$outputname"
6262         name=$func_stripname_result
6263         eval shared_ext=\"$shrext_cmds\"
6264         eval libname=\"$libname_spec\"
6265         ;;
6266       *)
6267         test "$module" = no && \
6268           func_fatal_help "libtool library \`$output' must begin with \`lib'"
6269
6270         if test "$need_lib_prefix" != no; then
6271           # Add the "lib" prefix for modules if required
6272           func_stripname '' '.la' "$outputname"
6273           name=$func_stripname_result
6274           eval shared_ext=\"$shrext_cmds\"
6275           eval libname=\"$libname_spec\"
6276         else
6277           func_stripname '' '.la' "$outputname"
6278           libname=$func_stripname_result
6279         fi
6280         ;;
6281       esac
6282
6283       if test -n "$objs"; then
6284         if test "$deplibs_check_method" != pass_all; then
6285           func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
6286         else
6287           $ECHO
6288           $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
6289           $ECHO "*** objects $objs is not portable!"
6290           libobjs="$libobjs $objs"
6291         fi
6292       fi
6293
6294       test "$dlself" != no && \
6295         func_warning "\`-dlopen self' is ignored for libtool libraries"
6296
6297       set dummy $rpath
6298       shift
6299       test "$#" -gt 1 && \
6300         func_warning "ignoring multiple \`-rpath's for a libtool library"
6301
6302       install_libdir="$1"
6303
6304       oldlibs=
6305       if test -z "$rpath"; then
6306         if test "$build_libtool_libs" = yes; then
6307           # Building a libtool convenience library.
6308           # Some compilers have problems with a `.al' extension so
6309           # convenience libraries should have the same extension an
6310           # archive normally would.
6311           oldlibs="$output_objdir/$libname.$libext $oldlibs"
6312           build_libtool_libs=convenience
6313           build_old_libs=yes
6314         fi
6315
6316         test -n "$vinfo" && \
6317           func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
6318
6319         test -n "$release" && \
6320           func_warning "\`-release' is ignored for convenience libraries"
6321       else
6322
6323         # Parse the version information argument.
6324         save_ifs="$IFS"; IFS=':'
6325         set dummy $vinfo 0 0 0
6326         shift
6327         IFS="$save_ifs"
6328
6329         test -n "$7" && \
6330           func_fatal_help "too many parameters to \`-version-info'"
6331
6332         # convert absolute version numbers to libtool ages
6333         # this retains compatibility with .la files and attempts
6334         # to make the code below a bit more comprehensible
6335
6336         case $vinfo_number in
6337         yes)
6338           number_major="$1"
6339           number_minor="$2"
6340           number_revision="$3"
6341           #
6342           # There are really only two kinds -- those that
6343           # use the current revision as the major version
6344           # and those that subtract age and use age as
6345           # a minor version.  But, then there is irix
6346           # which has an extra 1 added just for fun
6347           #
6348           case $version_type in
6349           darwin|linux|osf|windows|none)
6350             func_arith $number_major + $number_minor
6351             current=$func_arith_result
6352             age="$number_minor"
6353             revision="$number_revision"
6354             ;;
6355           freebsd-aout|freebsd-elf|sunos)
6356             current="$number_major"
6357             revision="$number_minor"
6358             age="0"
6359             ;;
6360           irix|nonstopux)
6361             func_arith $number_major + $number_minor
6362             current=$func_arith_result
6363             age="$number_minor"
6364             revision="$number_minor"
6365             lt_irix_increment=no
6366             ;;
6367           esac
6368           ;;
6369         no)
6370           current="$1"
6371           revision="$2"
6372           age="$3"
6373           ;;
6374         esac
6375
6376         # Check that each of the things are valid numbers.
6377         case $current in
6378         0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
6379         *)
6380           func_error "CURRENT \`$current' must be a nonnegative integer"
6381           func_fatal_error "\`$vinfo' is not valid version information"
6382           ;;
6383         esac
6384
6385         case $revision in
6386         0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
6387         *)
6388           func_error "REVISION \`$revision' must be a nonnegative integer"
6389           func_fatal_error "\`$vinfo' is not valid version information"
6390           ;;
6391         esac
6392
6393         case $age in
6394         0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
6395         *)
6396           func_error "AGE \`$age' must be a nonnegative integer"
6397           func_fatal_error "\`$vinfo' is not valid version information"
6398           ;;
6399         esac
6400
6401         if test "$age" -gt "$current"; then
6402           func_error "AGE \`$age' is greater than the current interface number \`$current'"
6403           func_fatal_error "\`$vinfo' is not valid version information"
6404         fi
6405
6406         # Calculate the version variables.
6407         major=
6408         versuffix=
6409         verstring=
6410         case $version_type in
6411         none) ;;
6412
6413         darwin)
6414           # Like Linux, but with the current version available in
6415           # verstring for coding it into the library header
6416           func_arith $current - $age
6417           major=.$func_arith_result
6418           versuffix="$major.$age.$revision"
6419           # Darwin ld doesn't like 0 for these options...
6420           func_arith $current + 1
6421           minor_current=$func_arith_result
6422           xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
6423           verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
6424           ;;
6425
6426         freebsd-aout)
6427           major=".$current"
6428           versuffix=".$current.$revision";
6429           ;;
6430
6431         freebsd-elf)
6432           major=".$current"
6433           versuffix=".$current"
6434           ;;
6435
6436         irix | nonstopux)
6437           if test "X$lt_irix_increment" = "Xno"; then
6438             func_arith $current - $age
6439           else
6440             func_arith $current - $age + 1
6441           fi
6442           major=$func_arith_result
6443
6444           case $version_type in
6445             nonstopux) verstring_prefix=nonstopux ;;
6446             *)         verstring_prefix=sgi ;;
6447           esac
6448           verstring="$verstring_prefix$major.$revision"
6449
6450           # Add in all the interfaces that we are compatible with.
6451           loop=$revision
6452           while test "$loop" -ne 0; do
6453             func_arith $revision - $loop
6454             iface=$func_arith_result
6455             func_arith $loop - 1
6456             loop=$func_arith_result
6457             verstring="$verstring_prefix$major.$iface:$verstring"
6458           done
6459
6460           # Before this point, $major must not contain `.'.
6461           major=.$major
6462           versuffix="$major.$revision"
6463           ;;
6464
6465         linux)
6466           func_arith $current - $age
6467           major=.$func_arith_result
6468           versuffix="$major.$age.$revision"
6469           ;;
6470
6471         osf)
6472           func_arith $current - $age
6473           major=.$func_arith_result
6474           versuffix=".$current.$age.$revision"
6475           verstring="$current.$age.$revision"
6476
6477           # Add in all the interfaces that we are compatible with.
6478           loop=$age
6479           while test "$loop" -ne 0; do
6480             func_arith $current - $loop
6481             iface=$func_arith_result
6482             func_arith $loop - 1
6483             loop=$func_arith_result
6484             verstring="$verstring:${iface}.0"
6485           done
6486
6487           # Make executables depend on our current version.
6488           verstring="$verstring:${current}.0"
6489           ;;
6490
6491         qnx)
6492           major=".$current"
6493           versuffix=".$current"
6494           ;;
6495
6496         sunos)
6497           major=".$current"
6498           versuffix=".$current.$revision"
6499           ;;
6500
6501         windows)
6502           # Use '-' rather than '.', since we only want one
6503           # extension on DOS 8.3 filesystems.
6504           func_arith $current - $age
6505           major=$func_arith_result
6506           versuffix="-$major"
6507           ;;
6508
6509         *)
6510           func_fatal_configuration "unknown library version type \`$version_type'"
6511           ;;
6512         esac
6513
6514         # Clear the version info if we defaulted, and they specified a release.
6515         if test -z "$vinfo" && test -n "$release"; then
6516           major=
6517           case $version_type in
6518           darwin)
6519             # we can't check for "0.0" in archive_cmds due to quoting
6520             # problems, so we reset it completely
6521             verstring=
6522             ;;
6523           *)
6524             verstring="0.0"
6525             ;;
6526           esac
6527           if test "$need_version" = no; then
6528             versuffix=
6529           else
6530             versuffix=".0.0"
6531           fi
6532         fi
6533
6534         # Remove version info from name if versioning should be avoided
6535         if test "$avoid_version" = yes && test "$need_version" = no; then
6536           major=
6537           versuffix=
6538           verstring=""
6539         fi
6540
6541         # Check to see if the archive will have undefined symbols.
6542         if test "$allow_undefined" = yes; then
6543           if test "$allow_undefined_flag" = unsupported; then
6544             func_warning "undefined symbols not allowed in $host shared libraries"
6545             build_libtool_libs=no
6546             build_old_libs=yes
6547           fi
6548         else
6549           # Don't allow undefined symbols.
6550           allow_undefined_flag="$no_undefined_flag"
6551         fi
6552
6553       fi
6554
6555       func_generate_dlsyms "$libname" "$libname" "yes"
6556       libobjs="$libobjs $symfileobj"
6557       test "X$libobjs" = "X " && libobjs=
6558
6559       if test "$mode" != relink; then
6560         # Remove our outputs, but don't remove object files since they
6561         # may have been created when compiling PIC objects.
6562         removelist=
6563         tempremovelist=`$ECHO "$output_objdir/*"`
6564         for p in $tempremovelist; do
6565           case $p in
6566             *.$objext | *.gcno)
6567                ;;
6568             $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
6569                if test "X$precious_files_regex" != "X"; then
6570                  if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
6571                  then
6572                    continue
6573                  fi
6574                fi
6575                removelist="$removelist $p"
6576                ;;
6577             *) ;;
6578           esac
6579         done
6580         test -n "$removelist" && \
6581           func_show_eval "${RM}r \$removelist"
6582       fi
6583
6584       # Now set the variables for building old libraries.
6585       if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
6586         oldlibs="$oldlibs $output_objdir/$libname.$libext"
6587
6588         # Transform .lo files to .o files.
6589         oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
6590       fi
6591
6592       # Eliminate all temporary directories.
6593       #for path in $notinst_path; do
6594       # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
6595       # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
6596       # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
6597       #done
6598
6599       if test -n "$xrpath"; then
6600         # If the user specified any rpath flags, then add them.
6601         temp_xrpath=
6602         for libdir in $xrpath; do
6603           temp_xrpath="$temp_xrpath -R$libdir"
6604           case "$finalize_rpath " in
6605           *" $libdir "*) ;;
6606           *) finalize_rpath="$finalize_rpath $libdir" ;;
6607           esac
6608         done
6609         if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
6610           dependency_libs="$temp_xrpath $dependency_libs"
6611         fi
6612       fi
6613
6614       # Make sure dlfiles contains only unique files that won't be dlpreopened
6615       old_dlfiles="$dlfiles"
6616       dlfiles=
6617       for lib in $old_dlfiles; do
6618         case " $dlprefiles $dlfiles " in
6619         *" $lib "*) ;;
6620         *) dlfiles="$dlfiles $lib" ;;
6621         esac
6622       done
6623
6624       # Make sure dlprefiles contains only unique files
6625       old_dlprefiles="$dlprefiles"
6626       dlprefiles=
6627       for lib in $old_dlprefiles; do
6628         case "$dlprefiles " in
6629         *" $lib "*) ;;
6630         *) dlprefiles="$dlprefiles $lib" ;;
6631         esac
6632       done
6633
6634       if test "$build_libtool_libs" = yes; then
6635         if test -n "$rpath"; then
6636           case $host in
6637           *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
6638             # these systems don't actually have a c library (as such)!
6639             ;;
6640           *-*-rhapsody* | *-*-darwin1.[012])
6641             # Rhapsody C library is in the System framework
6642             deplibs="$deplibs System.ltframework"
6643             ;;
6644           *-*-netbsd*)
6645             # Don't link with libc until the a.out ld.so is fixed.
6646             ;;
6647           *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
6648             # Do not include libc due to us having libc/libc_r.
6649             ;;
6650           *-*-sco3.2v5* | *-*-sco5v6*)
6651             # Causes problems with __ctype
6652             ;;
6653           *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
6654             # Compiler inserts libc in the correct place for threads to work
6655             ;;
6656           *)
6657             # Add libc to deplibs on all other systems if necessary.
6658             if test "$build_libtool_need_lc" = "yes"; then
6659               deplibs="$deplibs -lc"
6660             fi
6661             ;;
6662           esac
6663         fi
6664
6665         # Transform deplibs into only deplibs that can be linked in shared.
6666         name_save=$name
6667         libname_save=$libname
6668         release_save=$release
6669         versuffix_save=$versuffix
6670         major_save=$major
6671         # I'm not sure if I'm treating the release correctly.  I think
6672         # release should show up in the -l (ie -lgmp5) so we don't want to
6673         # add it in twice.  Is that correct?
6674         release=""
6675         versuffix=""
6676         major=""
6677         newdeplibs=
6678         droppeddeps=no
6679         case $deplibs_check_method in
6680         pass_all)
6681           # Don't check for shared/static.  Everything works.
6682           # This might be a little naive.  We might want to check
6683           # whether the library exists or not.  But this is on
6684           # osf3 & osf4 and I'm not really sure... Just
6685           # implementing what was already the behavior.
6686           newdeplibs=$deplibs
6687           ;;
6688         test_compile)
6689           # This code stresses the "libraries are programs" paradigm to its
6690           # limits. Maybe even breaks it.  We compile a program, linking it
6691           # against the deplibs as a proxy for the library.  Then we can check
6692           # whether they linked in statically or dynamically with ldd.
6693           $opt_dry_run || $RM conftest.c
6694           cat > conftest.c <<EOF
6695           int main() { return 0; }
6696 EOF
6697           $opt_dry_run || $RM conftest
6698           if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
6699             ldd_output=`ldd conftest`
6700             for i in $deplibs; do
6701               case $i in
6702               -l*)
6703                 func_stripname -l '' "$i"
6704                 name=$func_stripname_result
6705                 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
6706                   case " $predeps $postdeps " in
6707                   *" $i "*)
6708                     newdeplibs="$newdeplibs $i"
6709                     i=""
6710                     ;;
6711                   esac
6712                 fi
6713                 if test -n "$i" ; then
6714                   libname=`eval "\\$ECHO \"$libname_spec\""`
6715                   deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
6716                   set dummy $deplib_matches; shift
6717                   deplib_match=$1
6718                   if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
6719                     newdeplibs="$newdeplibs $i"
6720                   else
6721                     droppeddeps=yes
6722                     $ECHO
6723                     $ECHO "*** Warning: dynamic linker does not accept needed library $i."
6724                     $ECHO "*** I have the capability to make that library automatically link in when"
6725                     $ECHO "*** you link to this library.  But I can only do this if you have a"
6726                     $ECHO "*** shared version of the library, which I believe you do not have"
6727                     $ECHO "*** because a test_compile did reveal that the linker did not use it for"
6728                     $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
6729                   fi
6730                 fi
6731                 ;;
6732               *)
6733                 newdeplibs="$newdeplibs $i"
6734                 ;;
6735               esac
6736             done
6737           else
6738             # Error occurred in the first compile.  Let's try to salvage
6739             # the situation: Compile a separate program for each library.
6740             for i in $deplibs; do
6741               case $i in
6742               -l*)
6743                 func_stripname -l '' "$i"
6744                 name=$func_stripname_result
6745                 $opt_dry_run || $RM conftest
6746                 if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
6747                   ldd_output=`ldd conftest`
6748                   if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
6749                     case " $predeps $postdeps " in
6750                     *" $i "*)
6751                       newdeplibs="$newdeplibs $i"
6752                       i=""
6753                       ;;
6754                     esac
6755                   fi
6756                   if test -n "$i" ; then
6757                     libname=`eval "\\$ECHO \"$libname_spec\""`
6758                     deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
6759                     set dummy $deplib_matches; shift
6760                     deplib_match=$1
6761                     if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
6762                       newdeplibs="$newdeplibs $i"
6763                     else
6764                       droppeddeps=yes
6765                       $ECHO
6766                       $ECHO "*** Warning: dynamic linker does not accept needed library $i."
6767                       $ECHO "*** I have the capability to make that library automatically link in when"
6768                       $ECHO "*** you link to this library.  But I can only do this if you have a"
6769                       $ECHO "*** shared version of the library, which you do not appear to have"
6770                       $ECHO "*** because a test_compile did reveal that the linker did not use this one"
6771                       $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
6772                     fi
6773                   fi
6774                 else
6775                   droppeddeps=yes
6776                   $ECHO
6777                   $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
6778                   $ECHO "*** make it link in!  You will probably need to install it or some"
6779                   $ECHO "*** library that it depends on before this library will be fully"
6780                   $ECHO "*** functional.  Installing it before continuing would be even better."
6781                 fi
6782                 ;;
6783               *)
6784                 newdeplibs="$newdeplibs $i"
6785                 ;;
6786               esac
6787             done
6788           fi
6789           ;;
6790         file_magic*)
6791           set dummy $deplibs_check_method; shift
6792           file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
6793           for a_deplib in $deplibs; do
6794             case $a_deplib in
6795             -l*)
6796               func_stripname -l '' "$a_deplib"
6797               name=$func_stripname_result
6798               if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
6799                 case " $predeps $postdeps " in
6800                 *" $a_deplib "*)
6801                   newdeplibs="$newdeplibs $a_deplib"
6802                   a_deplib=""
6803                   ;;
6804                 esac
6805               fi
6806               if test -n "$a_deplib" ; then
6807                 libname=`eval "\\$ECHO \"$libname_spec\""`
6808                 for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
6809                   potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
6810                   for potent_lib in $potential_libs; do
6811                       # Follow soft links.
6812                       if ls -lLd "$potent_lib" 2>/dev/null |
6813                          $GREP " -> " >/dev/null; then
6814                         continue
6815                       fi
6816                       # The statement above tries to avoid entering an
6817                       # endless loop below, in case of cyclic links.
6818                       # We might still enter an endless loop, since a link
6819                       # loop can be closed while we follow links,
6820                       # but so what?
6821                       potlib="$potent_lib"
6822                       while test -h "$potlib" 2>/dev/null; do
6823                         potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
6824                         case $potliblink in
6825                         [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
6826                         *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
6827                         esac
6828                       done
6829                       if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
6830                          $SED -e 10q |
6831                          $EGREP "$file_magic_regex" > /dev/null; then
6832                         newdeplibs="$newdeplibs $a_deplib"
6833                         a_deplib=""
6834                         break 2
6835                       fi
6836                   done
6837                 done
6838               fi
6839               if test -n "$a_deplib" ; then
6840                 droppeddeps=yes
6841                 $ECHO
6842                 $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
6843                 $ECHO "*** I have the capability to make that library automatically link in when"
6844                 $ECHO "*** you link to this library.  But I can only do this if you have a"
6845                 $ECHO "*** shared version of the library, which you do not appear to have"
6846                 $ECHO "*** because I did check the linker path looking for a file starting"
6847                 if test -z "$potlib" ; then
6848                   $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
6849                 else
6850                   $ECHO "*** with $libname and none of the candidates passed a file format test"
6851                   $ECHO "*** using a file magic. Last file checked: $potlib"
6852                 fi
6853               fi
6854               ;;
6855             *)
6856               # Add a -L argument.
6857               newdeplibs="$newdeplibs $a_deplib"
6858               ;;
6859             esac
6860           done # Gone through all deplibs.
6861           ;;
6862         match_pattern*)
6863           set dummy $deplibs_check_method; shift
6864           match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
6865           for a_deplib in $deplibs; do
6866             case $a_deplib in
6867             -l*)
6868               func_stripname -l '' "$a_deplib"
6869               name=$func_stripname_result
6870               if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
6871                 case " $predeps $postdeps " in
6872                 *" $a_deplib "*)
6873                   newdeplibs="$newdeplibs $a_deplib"
6874                   a_deplib=""
6875                   ;;
6876                 esac
6877               fi
6878               if test -n "$a_deplib" ; then
6879                 libname=`eval "\\$ECHO \"$libname_spec\""`
6880                 for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
6881                   potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
6882                   for potent_lib in $potential_libs; do
6883                     potlib="$potent_lib" # see symlink-check above in file_magic test
6884                     if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
6885                        $EGREP "$match_pattern_regex" > /dev/null; then
6886                       newdeplibs="$newdeplibs $a_deplib"
6887                       a_deplib=""
6888                       break 2
6889                     fi
6890                   done
6891                 done
6892               fi
6893               if test -n "$a_deplib" ; then
6894                 droppeddeps=yes
6895                 $ECHO
6896                 $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
6897                 $ECHO "*** I have the capability to make that library automatically link in when"
6898                 $ECHO "*** you link to this library.  But I can only do this if you have a"
6899                 $ECHO "*** shared version of the library, which you do not appear to have"
6900                 $ECHO "*** because I did check the linker path looking for a file starting"
6901                 if test -z "$potlib" ; then
6902                   $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
6903                 else
6904                   $ECHO "*** with $libname and none of the candidates passed a file format test"
6905                   $ECHO "*** using a regex pattern. Last file checked: $potlib"
6906                 fi
6907               fi
6908               ;;
6909             *)
6910               # Add a -L argument.
6911               newdeplibs="$newdeplibs $a_deplib"
6912               ;;
6913             esac
6914           done # Gone through all deplibs.
6915           ;;
6916         none | unknown | *)
6917           newdeplibs=""
6918           tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
6919               -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
6920           if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
6921             for i in $predeps $postdeps ; do
6922               # can't use Xsed below, because $i might contain '/'
6923               tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
6924             done
6925           fi
6926           if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[      ]//g' |
6927              $GREP . >/dev/null; then
6928             $ECHO
6929             if test "X$deplibs_check_method" = "Xnone"; then
6930               $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
6931             else
6932               $ECHO "*** Warning: inter-library dependencies are not known to be supported."
6933             fi
6934             $ECHO "*** All declared inter-library dependencies are being dropped."
6935             droppeddeps=yes
6936           fi
6937           ;;
6938         esac
6939         versuffix=$versuffix_save
6940         major=$major_save
6941         release=$release_save
6942         libname=$libname_save
6943         name=$name_save
6944
6945         case $host in
6946         *-*-rhapsody* | *-*-darwin1.[012])
6947           # On Rhapsody replace the C library with the System framework
6948           newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
6949           ;;
6950         esac
6951
6952         if test "$droppeddeps" = yes; then
6953           if test "$module" = yes; then
6954             $ECHO
6955             $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
6956             $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
6957             $ECHO "*** a static module, that should work as long as the dlopening"
6958             $ECHO "*** application is linked with the -dlopen flag."
6959             if test -z "$global_symbol_pipe"; then
6960               $ECHO
6961               $ECHO "*** However, this would only work if libtool was able to extract symbol"
6962               $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
6963               $ECHO "*** not find such a program.  So, this module is probably useless."
6964               $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
6965             fi
6966             if test "$build_old_libs" = no; then
6967               oldlibs="$output_objdir/$libname.$libext"
6968               build_libtool_libs=module
6969               build_old_libs=yes
6970             else
6971               build_libtool_libs=no
6972             fi
6973           else
6974             $ECHO "*** The inter-library dependencies that have been dropped here will be"
6975             $ECHO "*** automatically added whenever a program is linked with this library"
6976             $ECHO "*** or is declared to -dlopen it."
6977
6978             if test "$allow_undefined" = no; then
6979               $ECHO
6980               $ECHO "*** Since this library must not contain undefined symbols,"
6981               $ECHO "*** because either the platform does not support them or"
6982               $ECHO "*** it was explicitly requested with -no-undefined,"
6983               $ECHO "*** libtool will only create a static version of it."
6984               if test "$build_old_libs" = no; then
6985                 oldlibs="$output_objdir/$libname.$libext"
6986                 build_libtool_libs=module
6987                 build_old_libs=yes
6988               else
6989                 build_libtool_libs=no
6990               fi
6991             fi
6992           fi
6993         fi
6994         # Done checking deplibs!
6995         deplibs=$newdeplibs
6996       fi
6997       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
6998       case $host in
6999         *-*-darwin*)
7000           newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
7001           new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
7002           deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
7003           ;;
7004       esac
7005
7006       # move library search paths that coincide with paths to not yet
7007       # installed libraries to the beginning of the library search list
7008       new_libs=
7009       for path in $notinst_path; do
7010         case " $new_libs " in
7011         *" -L$path/$objdir "*) ;;
7012         *)
7013           case " $deplibs " in
7014           *" -L$path/$objdir "*)
7015             new_libs="$new_libs -L$path/$objdir" ;;
7016           esac
7017           ;;
7018         esac
7019       done
7020       for deplib in $deplibs; do
7021         case $deplib in
7022         -L*)
7023           case " $new_libs " in
7024           *" $deplib "*) ;;
7025           *) new_libs="$new_libs $deplib" ;;
7026           esac
7027           ;;
7028         *) new_libs="$new_libs $deplib" ;;
7029         esac
7030       done
7031       deplibs="$new_libs"
7032
7033       # All the library-specific variables (install_libdir is set above).
7034       library_names=
7035       old_library=
7036       dlname=
7037
7038       # Test again, we may have decided not to build it any more
7039       if test "$build_libtool_libs" = yes; then
7040         if test "$hardcode_into_libs" = yes; then
7041           # Hardcode the library paths
7042           hardcode_libdirs=
7043           dep_rpath=
7044           rpath="$finalize_rpath"
7045           test "$mode" != relink && rpath="$compile_rpath$rpath"
7046           for libdir in $rpath; do
7047             if test -n "$hardcode_libdir_flag_spec"; then
7048               if test -n "$hardcode_libdir_separator"; then
7049                 if test -z "$hardcode_libdirs"; then
7050                   hardcode_libdirs="$libdir"
7051                 else
7052                   # Just accumulate the unique libdirs.
7053                   case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
7054                   *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
7055                     ;;
7056                   *)
7057                     hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
7058                     ;;
7059                   esac
7060                 fi
7061               else
7062                 eval flag=\"$hardcode_libdir_flag_spec\"
7063                 dep_rpath="$dep_rpath $flag"
7064               fi
7065             elif test -n "$runpath_var"; then
7066               case "$perm_rpath " in
7067               *" $libdir "*) ;;
7068               *) perm_rpath="$perm_rpath $libdir" ;;
7069               esac
7070             fi
7071           done
7072           # Substitute the hardcoded libdirs into the rpath.
7073           if test -n "$hardcode_libdir_separator" &&
7074              test -n "$hardcode_libdirs"; then
7075             libdir="$hardcode_libdirs"
7076             if test -n "$hardcode_libdir_flag_spec_ld"; then
7077               eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
7078             else
7079               eval dep_rpath=\"$hardcode_libdir_flag_spec\"
7080             fi
7081           fi
7082           if test -n "$runpath_var" && test -n "$perm_rpath"; then
7083             # We should set the runpath_var.
7084             rpath=
7085             for dir in $perm_rpath; do
7086               rpath="$rpath$dir:"
7087             done
7088             eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
7089           fi
7090           test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
7091         fi
7092
7093         shlibpath="$finalize_shlibpath"
7094         test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
7095         if test -n "$shlibpath"; then
7096           eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
7097         fi
7098
7099         # Get the real and link names of the library.
7100         eval shared_ext=\"$shrext_cmds\"
7101         eval library_names=\"$library_names_spec\"
7102         set dummy $library_names
7103         shift
7104         realname="$1"
7105         shift
7106
7107         if test -n "$soname_spec"; then
7108           eval soname=\"$soname_spec\"
7109         else
7110           soname="$realname"
7111         fi
7112         if test -z "$dlname"; then
7113           dlname=$soname
7114         fi
7115
7116         lib="$output_objdir/$realname"
7117         linknames=
7118         for link
7119         do
7120           linknames="$linknames $link"
7121         done
7122
7123         # Use standard objects if they are pic
7124         test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
7125         test "X$libobjs" = "X " && libobjs=
7126
7127         delfiles=
7128         if test -n "$export_symbols" && test -n "$include_expsyms"; then
7129           $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
7130           export_symbols="$output_objdir/$libname.uexp"
7131           delfiles="$delfiles $export_symbols"
7132         fi
7133
7134         orig_export_symbols=
7135         case $host_os in
7136         cygwin* | mingw* | cegcc*)
7137           if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
7138             # exporting using user supplied symfile
7139             if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
7140               # and it's NOT already a .def file. Must figure out
7141               # which of the given symbols are data symbols and tag
7142               # them as such. So, trigger use of export_symbols_cmds.
7143               # export_symbols gets reassigned inside the "prepare
7144               # the list of exported symbols" if statement, so the
7145               # include_expsyms logic still works.
7146               orig_export_symbols="$export_symbols"
7147               export_symbols=
7148               always_export_symbols=yes
7149             fi
7150           fi
7151           ;;
7152         esac
7153
7154         # Prepare the list of exported symbols
7155         if test -z "$export_symbols"; then
7156           if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
7157             func_verbose "generating symbol list for \`$libname.la'"
7158             export_symbols="$output_objdir/$libname.exp"
7159             $opt_dry_run || $RM $export_symbols
7160             cmds=$export_symbols_cmds
7161             save_ifs="$IFS"; IFS='~'
7162             for cmd in $cmds; do
7163               IFS="$save_ifs"
7164               eval cmd=\"$cmd\"
7165               func_len " $cmd"
7166               len=$func_len_result
7167               if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
7168                 func_show_eval "$cmd" 'exit $?'
7169                 skipped_export=false
7170               else
7171                 # The command line is too long to execute in one step.
7172                 func_verbose "using reloadable object file for export list..."
7173                 skipped_export=:
7174                 # Break out early, otherwise skipped_export may be
7175                 # set to false by a later but shorter cmd.
7176                 break
7177               fi
7178             done
7179             IFS="$save_ifs"
7180             if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
7181               func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
7182               func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
7183             fi
7184           fi
7185         fi
7186
7187         if test -n "$export_symbols" && test -n "$include_expsyms"; then
7188           tmp_export_symbols="$export_symbols"
7189           test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
7190           $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
7191         fi
7192
7193         if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
7194           # The given exports_symbols file has to be filtered, so filter it.
7195           func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
7196           # FIXME: $output_objdir/$libname.filter potentially contains lots of
7197           # 's' commands which not all seds can handle. GNU sed should be fine
7198           # though. Also, the filter scales superlinearly with the number of
7199           # global variables. join(1) would be nice here, but unfortunately
7200           # isn't a blessed tool.
7201           $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
7202           delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
7203           export_symbols=$output_objdir/$libname.def
7204           $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
7205         fi
7206
7207         tmp_deplibs=
7208         for test_deplib in $deplibs; do
7209           case " $convenience " in
7210           *" $test_deplib "*) ;;
7211           *)
7212             tmp_deplibs="$tmp_deplibs $test_deplib"
7213             ;;
7214           esac
7215         done
7216         deplibs="$tmp_deplibs"
7217
7218         if test -n "$convenience"; then
7219           if test -n "$whole_archive_flag_spec" &&
7220             test "$compiler_needs_object" = yes &&
7221             test -z "$libobjs"; then
7222             # extract the archives, so we have objects to list.
7223             # TODO: could optimize this to just extract one archive.
7224             whole_archive_flag_spec=
7225           fi
7226           if test -n "$whole_archive_flag_spec"; then
7227             save_libobjs=$libobjs
7228             eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
7229             test "X$libobjs" = "X " && libobjs=
7230           else
7231             gentop="$output_objdir/${outputname}x"
7232             generated="$generated $gentop"
7233
7234             func_extract_archives $gentop $convenience
7235             libobjs="$libobjs $func_extract_archives_result"
7236             test "X$libobjs" = "X " && libobjs=
7237           fi
7238         fi
7239
7240         if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
7241           eval flag=\"$thread_safe_flag_spec\"
7242           linker_flags="$linker_flags $flag"
7243         fi
7244
7245         # Make a backup of the uninstalled library when relinking
7246         if test "$mode" = relink; then
7247           $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
7248         fi
7249
7250         # Do each of the archive commands.
7251         if test "$module" = yes && test -n "$module_cmds" ; then
7252           if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
7253             eval test_cmds=\"$module_expsym_cmds\"
7254             cmds=$module_expsym_cmds
7255           else
7256             eval test_cmds=\"$module_cmds\"
7257             cmds=$module_cmds
7258           fi
7259         else
7260           if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
7261             eval test_cmds=\"$archive_expsym_cmds\"
7262             cmds=$archive_expsym_cmds
7263           else
7264             eval test_cmds=\"$archive_cmds\"
7265             cmds=$archive_cmds
7266           fi
7267         fi
7268
7269         if test "X$skipped_export" != "X:" &&
7270            func_len " $test_cmds" &&
7271            len=$func_len_result &&
7272            test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
7273           :
7274         else
7275           # The command line is too long to link in one step, link piecewise
7276           # or, if using GNU ld and skipped_export is not :, use a linker
7277           # script.
7278
7279           # Save the value of $output and $libobjs because we want to
7280           # use them later.  If we have whole_archive_flag_spec, we
7281           # want to use save_libobjs as it was before
7282           # whole_archive_flag_spec was expanded, because we can't
7283           # assume the linker understands whole_archive_flag_spec.
7284           # This may have to be revisited, in case too many
7285           # convenience libraries get linked in and end up exceeding
7286           # the spec.
7287           if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
7288             save_libobjs=$libobjs
7289           fi
7290           save_output=$output
7291           output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
7292
7293           # Clear the reloadable object creation command queue and
7294           # initialize k to one.
7295           test_cmds=
7296           concat_cmds=
7297           objlist=
7298           last_robj=
7299           k=1
7300
7301           if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
7302             output=${output_objdir}/${output_la}.lnkscript
7303             func_verbose "creating GNU ld script: $output"
7304             $ECHO 'INPUT (' > $output
7305             for obj in $save_libobjs
7306             do
7307               $ECHO "$obj" >> $output
7308             done
7309             $ECHO ')' >> $output
7310             delfiles="$delfiles $output"
7311           elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
7312             output=${output_objdir}/${output_la}.lnk
7313             func_verbose "creating linker input file list: $output"
7314             : > $output
7315             set x $save_libobjs
7316             shift
7317             firstobj=
7318             if test "$compiler_needs_object" = yes; then
7319               firstobj="$1 "
7320               shift
7321             fi
7322             for obj
7323             do
7324               $ECHO "$obj" >> $output
7325             done
7326             delfiles="$delfiles $output"
7327             output=$firstobj\"$file_list_spec$output\"
7328           else
7329             if test -n "$save_libobjs"; then
7330               func_verbose "creating reloadable object files..."
7331               output=$output_objdir/$output_la-${k}.$objext
7332               eval test_cmds=\"$reload_cmds\"
7333               func_len " $test_cmds"
7334               len0=$func_len_result
7335               len=$len0
7336
7337               # Loop over the list of objects to be linked.
7338               for obj in $save_libobjs
7339               do
7340                 func_len " $obj"
7341                 func_arith $len + $func_len_result
7342                 len=$func_arith_result
7343                 if test "X$objlist" = X ||
7344                    test "$len" -lt "$max_cmd_len"; then
7345                   func_append objlist " $obj"
7346                 else
7347                   # The command $test_cmds is almost too long, add a
7348                   # command to the queue.
7349                   if test "$k" -eq 1 ; then
7350                     # The first file doesn't have a previous command to add.
7351                     eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
7352                   else
7353                     # All subsequent reloadable object files will link in
7354                     # the last one created.
7355                     eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
7356                   fi
7357                   last_robj=$output_objdir/$output_la-${k}.$objext
7358                   func_arith $k + 1
7359                   k=$func_arith_result
7360                   output=$output_objdir/$output_la-${k}.$objext
7361                   objlist=$obj
7362                   func_len " $last_robj"
7363                   func_arith $len0 + $func_len_result
7364                   len=$func_arith_result
7365                 fi
7366               done
7367               # Handle the remaining objects by creating one last
7368               # reloadable object file.  All subsequent reloadable object
7369               # files will link in the last one created.
7370               test -z "$concat_cmds" || concat_cmds=$concat_cmds~
7371               eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
7372               if test -n "$last_robj"; then
7373                 eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
7374               fi
7375               delfiles="$delfiles $output"
7376
7377             else
7378               output=
7379             fi
7380
7381             if ${skipped_export-false}; then
7382               func_verbose "generating symbol list for \`$libname.la'"
7383               export_symbols="$output_objdir/$libname.exp"
7384               $opt_dry_run || $RM $export_symbols
7385               libobjs=$output
7386               # Append the command to create the export file.
7387               test -z "$concat_cmds" || concat_cmds=$concat_cmds~
7388               eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
7389               if test -n "$last_robj"; then
7390                 eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
7391               fi
7392             fi
7393
7394             test -n "$save_libobjs" &&
7395               func_verbose "creating a temporary reloadable object file: $output"
7396
7397             # Loop through the commands generated above and execute them.
7398             save_ifs="$IFS"; IFS='~'
7399             for cmd in $concat_cmds; do
7400               IFS="$save_ifs"
7401               $opt_silent || {
7402                   func_quote_for_expand "$cmd"
7403                   eval "func_echo $func_quote_for_expand_result"
7404               }
7405               $opt_dry_run || eval "$cmd" || {
7406                 lt_exit=$?
7407
7408                 # Restore the uninstalled library and exit
7409                 if test "$mode" = relink; then
7410                   ( cd "$output_objdir" && \
7411                     $RM "${realname}T" && \
7412                     $MV "${realname}U" "$realname" )
7413                 fi
7414
7415                 exit $lt_exit
7416               }
7417             done
7418             IFS="$save_ifs"
7419
7420             if test -n "$export_symbols_regex" && ${skipped_export-false}; then
7421               func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
7422               func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
7423             fi
7424           fi
7425
7426           if ${skipped_export-false}; then
7427             if test -n "$export_symbols" && test -n "$include_expsyms"; then
7428               tmp_export_symbols="$export_symbols"
7429               test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
7430               $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
7431             fi
7432
7433             if test -n "$orig_export_symbols"; then
7434               # The given exports_symbols file has to be filtered, so filter it.
7435               func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
7436               # FIXME: $output_objdir/$libname.filter potentially contains lots of
7437               # 's' commands which not all seds can handle. GNU sed should be fine
7438               # though. Also, the filter scales superlinearly with the number of
7439               # global variables. join(1) would be nice here, but unfortunately
7440               # isn't a blessed tool.
7441               $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
7442               delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
7443               export_symbols=$output_objdir/$libname.def
7444               $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
7445             fi
7446           fi
7447
7448           libobjs=$output
7449           # Restore the value of output.
7450           output=$save_output
7451
7452           if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
7453             eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
7454             test "X$libobjs" = "X " && libobjs=
7455           fi
7456           # Expand the library linking commands again to reset the
7457           # value of $libobjs for piecewise linking.
7458
7459           # Do each of the archive commands.
7460           if test "$module" = yes && test -n "$module_cmds" ; then
7461             if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
7462               cmds=$module_expsym_cmds
7463             else
7464               cmds=$module_cmds
7465             fi
7466           else
7467             if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
7468               cmds=$archive_expsym_cmds
7469             else
7470               cmds=$archive_cmds
7471             fi
7472           fi
7473         fi
7474
7475         if test -n "$delfiles"; then
7476           # Append the command to remove temporary files to $cmds.
7477           eval cmds=\"\$cmds~\$RM $delfiles\"
7478         fi
7479
7480         # Add any objects from preloaded convenience libraries
7481         if test -n "$dlprefiles"; then
7482           gentop="$output_objdir/${outputname}x"
7483           generated="$generated $gentop"
7484
7485           func_extract_archives $gentop $dlprefiles
7486           libobjs="$libobjs $func_extract_archives_result"
7487           test "X$libobjs" = "X " && libobjs=
7488         fi
7489
7490         save_ifs="$IFS"; IFS='~'
7491         for cmd in $cmds; do
7492           IFS="$save_ifs"
7493           eval cmd=\"$cmd\"
7494           $opt_silent || {
7495             func_quote_for_expand "$cmd"
7496             eval "func_echo $func_quote_for_expand_result"
7497           }
7498           $opt_dry_run || eval "$cmd" || {
7499             lt_exit=$?
7500
7501             # Restore the uninstalled library and exit
7502             if test "$mode" = relink; then
7503               ( cd "$output_objdir" && \
7504                 $RM "${realname}T" && \
7505                 $MV "${realname}U" "$realname" )
7506             fi
7507
7508             exit $lt_exit
7509           }
7510         done
7511         IFS="$save_ifs"
7512
7513         # Restore the uninstalled library and exit
7514         if test "$mode" = relink; then
7515           $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
7516
7517           if test -n "$convenience"; then
7518             if test -z "$whole_archive_flag_spec"; then
7519               func_show_eval '${RM}r "$gentop"'
7520             fi
7521           fi
7522
7523           exit $EXIT_SUCCESS
7524         fi
7525
7526         # Create links to the real library.
7527         for linkname in $linknames; do
7528           if test "$realname" != "$linkname"; then
7529             func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
7530           fi
7531         done
7532
7533         # If -module or -export-dynamic was specified, set the dlname.
7534         if test "$module" = yes || test "$export_dynamic" = yes; then
7535           # On all known operating systems, these are identical.
7536           dlname="$soname"
7537         fi
7538       fi
7539       ;;
7540
7541     obj)
7542       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
7543         func_warning "\`-dlopen' is ignored for objects"
7544       fi
7545
7546       case " $deplibs" in
7547       *\ -l* | *\ -L*)
7548         func_warning "\`-l' and \`-L' are ignored for objects" ;;
7549       esac
7550
7551       test -n "$rpath" && \
7552         func_warning "\`-rpath' is ignored for objects"
7553
7554       test -n "$xrpath" && \
7555         func_warning "\`-R' is ignored for objects"
7556
7557       test -n "$vinfo" && \
7558         func_warning "\`-version-info' is ignored for objects"
7559
7560       test -n "$release" && \
7561         func_warning "\`-release' is ignored for objects"
7562
7563       case $output in
7564       *.lo)
7565         test -n "$objs$old_deplibs" && \
7566           func_fatal_error "cannot build library object \`$output' from non-libtool objects"
7567
7568         libobj=$output
7569         func_lo2o "$libobj"
7570         obj=$func_lo2o_result
7571         ;;
7572       *)
7573         libobj=
7574         obj="$output"
7575         ;;
7576       esac
7577
7578       # Delete the old objects.
7579       $opt_dry_run || $RM $obj $libobj
7580
7581       # Objects from convenience libraries.  This assumes
7582       # single-version convenience libraries.  Whenever we create
7583       # different ones for PIC/non-PIC, this we'll have to duplicate
7584       # the extraction.
7585       reload_conv_objs=
7586       gentop=
7587       # reload_cmds runs $LD directly, so let us get rid of
7588       # -Wl from whole_archive_flag_spec and hope we can get by with
7589       # turning comma into space..
7590       wl=
7591
7592       if test -n "$convenience"; then
7593         if test -n "$whole_archive_flag_spec"; then
7594           eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
7595           reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
7596         else
7597           gentop="$output_objdir/${obj}x"
7598           generated="$generated $gentop"
7599
7600           func_extract_archives $gentop $convenience
7601           reload_conv_objs="$reload_objs $func_extract_archives_result"
7602         fi
7603       fi
7604
7605       # Create the old-style object.
7606       reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
7607
7608       output="$obj"
7609       func_execute_cmds "$reload_cmds" 'exit $?'
7610
7611       # Exit if we aren't doing a library object file.
7612       if test -z "$libobj"; then
7613         if test -n "$gentop"; then
7614           func_show_eval '${RM}r "$gentop"'
7615         fi
7616
7617         exit $EXIT_SUCCESS
7618       fi
7619
7620       if test "$build_libtool_libs" != yes; then
7621         if test -n "$gentop"; then
7622           func_show_eval '${RM}r "$gentop"'
7623         fi
7624
7625         # Create an invalid libtool object if no PIC, so that we don't
7626         # accidentally link it into a program.
7627         # $show "echo timestamp > $libobj"
7628         # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
7629         exit $EXIT_SUCCESS
7630       fi
7631
7632       if test -n "$pic_flag" || test "$pic_mode" != default; then
7633         # Only do commands if we really have different PIC objects.
7634         reload_objs="$libobjs $reload_conv_objs"
7635         output="$libobj"
7636         func_execute_cmds "$reload_cmds" 'exit $?'
7637       fi
7638
7639       if test -n "$gentop"; then
7640         func_show_eval '${RM}r "$gentop"'
7641       fi
7642
7643       exit $EXIT_SUCCESS
7644       ;;
7645
7646     prog)
7647       case $host in
7648         *cygwin*) func_stripname '' '.exe' "$output"
7649                   output=$func_stripname_result.exe;;
7650       esac
7651       test -n "$vinfo" && \
7652         func_warning "\`-version-info' is ignored for programs"
7653
7654       test -n "$release" && \
7655         func_warning "\`-release' is ignored for programs"
7656
7657       test "$preload" = yes \
7658         && test "$dlopen_support" = unknown \
7659         && test "$dlopen_self" = unknown \
7660         && test "$dlopen_self_static" = unknown && \
7661           func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
7662
7663       case $host in
7664       *-*-rhapsody* | *-*-darwin1.[012])
7665         # On Rhapsody replace the C library is the System framework
7666         compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
7667         finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
7668         ;;
7669       esac
7670
7671       case $host in
7672       *-*-darwin*)
7673         # Don't allow lazy linking, it breaks C++ global constructors
7674         # But is supposedly fixed on 10.4 or later (yay!).
7675         if test "$tagname" = CXX ; then
7676           case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
7677             10.[0123])
7678               compile_command="$compile_command ${wl}-bind_at_load"
7679               finalize_command="$finalize_command ${wl}-bind_at_load"
7680             ;;
7681           esac
7682         fi
7683         # Time to change all our "foo.ltframework" stuff back to "-framework foo"
7684         compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
7685         finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
7686         ;;
7687       esac
7688
7689
7690       # move library search paths that coincide with paths to not yet
7691       # installed libraries to the beginning of the library search list
7692       new_libs=
7693       for path in $notinst_path; do
7694         case " $new_libs " in
7695         *" -L$path/$objdir "*) ;;
7696         *)
7697           case " $compile_deplibs " in
7698           *" -L$path/$objdir "*)
7699             new_libs="$new_libs -L$path/$objdir" ;;
7700           esac
7701           ;;
7702         esac
7703       done
7704       for deplib in $compile_deplibs; do
7705         case $deplib in
7706         -L*)
7707           case " $new_libs " in
7708           *" $deplib "*) ;;
7709           *) new_libs="$new_libs $deplib" ;;
7710           esac
7711           ;;
7712         *) new_libs="$new_libs $deplib" ;;
7713         esac
7714       done
7715       compile_deplibs="$new_libs"
7716
7717
7718       compile_command="$compile_command $compile_deplibs"
7719       finalize_command="$finalize_command $finalize_deplibs"
7720
7721       if test -n "$rpath$xrpath"; then
7722         # If the user specified any rpath flags, then add them.
7723         for libdir in $rpath $xrpath; do
7724           # This is the magic to use -rpath.
7725           case "$finalize_rpath " in
7726           *" $libdir "*) ;;
7727           *) finalize_rpath="$finalize_rpath $libdir" ;;
7728           esac
7729         done
7730       fi
7731
7732       # Now hardcode the library paths
7733       rpath=
7734       hardcode_libdirs=
7735       for libdir in $compile_rpath $finalize_rpath; do
7736         if test -n "$hardcode_libdir_flag_spec"; then
7737           if test -n "$hardcode_libdir_separator"; then
7738             if test -z "$hardcode_libdirs"; then
7739               hardcode_libdirs="$libdir"
7740             else
7741               # Just accumulate the unique libdirs.
7742               case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
7743               *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
7744                 ;;
7745               *)
7746                 hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
7747                 ;;
7748               esac
7749             fi
7750           else
7751             eval flag=\"$hardcode_libdir_flag_spec\"
7752             rpath="$rpath $flag"
7753           fi
7754         elif test -n "$runpath_var"; then
7755           case "$perm_rpath " in
7756           *" $libdir "*) ;;
7757           *) perm_rpath="$perm_rpath $libdir" ;;
7758           esac
7759         fi
7760         case $host in
7761         *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
7762           testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
7763           case :$dllsearchpath: in
7764           *":$libdir:"*) ;;
7765           ::) dllsearchpath=$libdir;;
7766           *) dllsearchpath="$dllsearchpath:$libdir";;
7767           esac
7768           case :$dllsearchpath: in
7769           *":$testbindir:"*) ;;
7770           ::) dllsearchpath=$testbindir;;
7771           *) dllsearchpath="$dllsearchpath:$testbindir";;
7772           esac
7773           ;;
7774         esac
7775       done
7776       # Substitute the hardcoded libdirs into the rpath.
7777       if test -n "$hardcode_libdir_separator" &&
7778          test -n "$hardcode_libdirs"; then
7779         libdir="$hardcode_libdirs"
7780         eval rpath=\" $hardcode_libdir_flag_spec\"
7781       fi
7782       compile_rpath="$rpath"
7783
7784       rpath=
7785       hardcode_libdirs=
7786       for libdir in $finalize_rpath; do
7787         if test -n "$hardcode_libdir_flag_spec"; then
7788           if test -n "$hardcode_libdir_separator"; then
7789             if test -z "$hardcode_libdirs"; then
7790               hardcode_libdirs="$libdir"
7791             else
7792               # Just accumulate the unique libdirs.
7793               case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
7794               *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
7795                 ;;
7796               *)
7797                 hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
7798                 ;;
7799               esac
7800             fi
7801           else
7802             eval flag=\"$hardcode_libdir_flag_spec\"
7803             rpath="$rpath $flag"
7804           fi
7805         elif test -n "$runpath_var"; then
7806           case "$finalize_perm_rpath " in
7807           *" $libdir "*) ;;
7808           *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
7809           esac
7810         fi
7811       done
7812       # Substitute the hardcoded libdirs into the rpath.
7813       if test -n "$hardcode_libdir_separator" &&
7814          test -n "$hardcode_libdirs"; then
7815         libdir="$hardcode_libdirs"
7816         eval rpath=\" $hardcode_libdir_flag_spec\"
7817       fi
7818       finalize_rpath="$rpath"
7819
7820       if test -n "$libobjs" && test "$build_old_libs" = yes; then
7821         # Transform all the library objects into standard objects.
7822         compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
7823         finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
7824       fi
7825
7826       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
7827
7828       # template prelinking step
7829       if test -n "$prelink_cmds"; then
7830         func_execute_cmds "$prelink_cmds" 'exit $?'
7831       fi
7832
7833       wrappers_required=yes
7834       case $host in
7835       *cygwin* | *mingw* )
7836         if test "$build_libtool_libs" != yes; then
7837           wrappers_required=no
7838         fi
7839         ;;
7840       *cegcc)
7841         # Disable wrappers for cegcc, we are cross compiling anyway.
7842         wrappers_required=no
7843         ;;
7844       *)
7845         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
7846           wrappers_required=no
7847         fi
7848         ;;
7849       esac
7850       if test "$wrappers_required" = no; then
7851         # Replace the output file specification.
7852         compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
7853         link_command="$compile_command$compile_rpath"
7854
7855         # We have no uninstalled library dependencies, so finalize right now.
7856         exit_status=0
7857         func_show_eval "$link_command" 'exit_status=$?'
7858
7859         # Delete the generated files.
7860         if test -f "$output_objdir/${outputname}S.${objext}"; then
7861           func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
7862         fi
7863
7864         exit $exit_status
7865       fi
7866
7867       if test -n "$compile_shlibpath$finalize_shlibpath"; then
7868         compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
7869       fi
7870       if test -n "$finalize_shlibpath"; then
7871         finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
7872       fi
7873
7874       compile_var=
7875       finalize_var=
7876       if test -n "$runpath_var"; then
7877         if test -n "$perm_rpath"; then
7878           # We should set the runpath_var.
7879           rpath=
7880           for dir in $perm_rpath; do
7881             rpath="$rpath$dir:"
7882           done
7883           compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
7884         fi
7885         if test -n "$finalize_perm_rpath"; then
7886           # We should set the runpath_var.
7887           rpath=
7888           for dir in $finalize_perm_rpath; do
7889             rpath="$rpath$dir:"
7890           done
7891           finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
7892         fi
7893       fi
7894
7895       if test "$no_install" = yes; then
7896         # We don't need to create a wrapper script.
7897         link_command="$compile_var$compile_command$compile_rpath"
7898         # Replace the output file specification.
7899         link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
7900         # Delete the old output file.
7901         $opt_dry_run || $RM $output
7902         # Link the executable and exit
7903         func_show_eval "$link_command" 'exit $?'
7904         exit $EXIT_SUCCESS
7905       fi
7906
7907       if test "$hardcode_action" = relink; then
7908         # Fast installation is not supported
7909         link_command="$compile_var$compile_command$compile_rpath"
7910         relink_command="$finalize_var$finalize_command$finalize_rpath"
7911
7912         func_warning "this platform does not like uninstalled shared libraries"
7913         func_warning "\`$output' will be relinked during installation"
7914       else
7915         if test "$fast_install" != no; then
7916           link_command="$finalize_var$compile_command$finalize_rpath"
7917           if test "$fast_install" = yes; then
7918             relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
7919           else
7920             # fast_install is set to needless
7921             relink_command=
7922           fi
7923         else
7924           link_command="$compile_var$compile_command$compile_rpath"
7925           relink_command="$finalize_var$finalize_command$finalize_rpath"
7926         fi
7927       fi
7928
7929       # Replace the output file specification.
7930       link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
7931
7932       # Delete the old output files.
7933       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
7934
7935       func_show_eval "$link_command" 'exit $?'
7936
7937       # Now create the wrapper script.
7938       func_verbose "creating $output"
7939
7940       # Quote the relink command for shipping.
7941       if test -n "$relink_command"; then
7942         # Preserve any variables that may affect compiler behavior
7943         for var in $variables_saved_for_relink; do
7944           if eval test -z \"\${$var+set}\"; then
7945             relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
7946           elif eval var_value=\$$var; test -z "$var_value"; then
7947             relink_command="$var=; export $var; $relink_command"
7948           else
7949             func_quote_for_eval "$var_value"
7950             relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
7951           fi
7952         done
7953         relink_command="(cd `pwd`; $relink_command)"
7954         relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
7955       fi
7956
7957       # Quote $ECHO for shipping.
7958       if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
7959         case $progpath in
7960         [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
7961         *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
7962         esac
7963         qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
7964       else
7965         qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
7966       fi
7967
7968       # Only actually do things if not in dry run mode.
7969       $opt_dry_run || {
7970         # win32 will think the script is a binary if it has
7971         # a .exe suffix, so we strip it off here.
7972         case $output in
7973           *.exe) func_stripname '' '.exe' "$output"
7974                  output=$func_stripname_result ;;
7975         esac
7976         # test for cygwin because mv fails w/o .exe extensions
7977         case $host in
7978           *cygwin*)
7979             exeext=.exe
7980             func_stripname '' '.exe' "$outputname"
7981             outputname=$func_stripname_result ;;
7982           *) exeext= ;;
7983         esac
7984         case $host in
7985           *cygwin* | *mingw* )
7986             func_dirname_and_basename "$output" "" "."
7987             output_name=$func_basename_result
7988             output_path=$func_dirname_result
7989             cwrappersource="$output_path/$objdir/lt-$output_name.c"
7990             cwrapper="$output_path/$output_name.exe"
7991             $RM $cwrappersource $cwrapper
7992             trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
7993
7994             func_emit_cwrapperexe_src > $cwrappersource
7995
7996             # The wrapper executable is built using the $host compiler,
7997             # because it contains $host paths and files. If cross-
7998             # compiling, it, like the target executable, must be
7999             # executed on the $host or under an emulation environment.
8000             $opt_dry_run || {
8001               $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
8002               $STRIP $cwrapper
8003             }
8004
8005             # Now, create the wrapper script for func_source use:
8006             func_ltwrapper_scriptname $cwrapper
8007             $RM $func_ltwrapper_scriptname_result
8008             trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
8009             $opt_dry_run || {
8010               # note: this script will not be executed, so do not chmod.
8011               if test "x$build" = "x$host" ; then
8012                 $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
8013               else
8014                 func_emit_wrapper no > $func_ltwrapper_scriptname_result
8015               fi
8016             }
8017           ;;
8018           * )
8019             $RM $output
8020             trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
8021
8022             func_emit_wrapper no > $output
8023             chmod +x $output
8024           ;;
8025         esac
8026       }
8027       exit $EXIT_SUCCESS
8028       ;;
8029     esac
8030
8031     # See if we need to build an old-fashioned archive.
8032     for oldlib in $oldlibs; do
8033
8034       if test "$build_libtool_libs" = convenience; then
8035         oldobjs="$libobjs_save $symfileobj"
8036         addlibs="$convenience"
8037         build_libtool_libs=no
8038       else
8039         if test "$build_libtool_libs" = module; then
8040           oldobjs="$libobjs_save"
8041           build_libtool_libs=no
8042         else
8043           oldobjs="$old_deplibs $non_pic_objects"
8044           if test "$preload" = yes && test -f "$symfileobj"; then
8045             oldobjs="$oldobjs $symfileobj"
8046           fi
8047         fi
8048         addlibs="$old_convenience"
8049       fi
8050
8051       if test -n "$addlibs"; then
8052         gentop="$output_objdir/${outputname}x"
8053         generated="$generated $gentop"
8054
8055         func_extract_archives $gentop $addlibs
8056         oldobjs="$oldobjs $func_extract_archives_result"
8057       fi
8058
8059       # Do each command in the archive commands.
8060       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
8061         cmds=$old_archive_from_new_cmds
8062       else
8063
8064         # Add any objects from preloaded convenience libraries
8065         if test -n "$dlprefiles"; then
8066           gentop="$output_objdir/${outputname}x"
8067           generated="$generated $gentop"
8068
8069           func_extract_archives $gentop $dlprefiles
8070           oldobjs="$oldobjs $func_extract_archives_result"
8071         fi
8072
8073         # POSIX demands no paths to be encoded in archives.  We have
8074         # to avoid creating archives with duplicate basenames if we
8075         # might have to extract them afterwards, e.g., when creating a
8076         # static archive out of a convenience library, or when linking
8077         # the entirety of a libtool archive into another (currently
8078         # not supported by libtool).
8079         if (for obj in $oldobjs
8080             do
8081               func_basename "$obj"
8082               $ECHO "$func_basename_result"
8083             done | sort | sort -uc >/dev/null 2>&1); then
8084           :
8085         else
8086           $ECHO "copying selected object files to avoid basename conflicts..."
8087           gentop="$output_objdir/${outputname}x"
8088           generated="$generated $gentop"
8089           func_mkdir_p "$gentop"
8090           save_oldobjs=$oldobjs
8091           oldobjs=
8092           counter=1
8093           for obj in $save_oldobjs
8094           do
8095             func_basename "$obj"
8096             objbase="$func_basename_result"
8097             case " $oldobjs " in
8098             " ") oldobjs=$obj ;;
8099             *[\ /]"$objbase "*)
8100               while :; do
8101                 # Make sure we don't pick an alternate name that also
8102                 # overlaps.
8103                 newobj=lt$counter-$objbase
8104                 func_arith $counter + 1
8105                 counter=$func_arith_result
8106                 case " $oldobjs " in
8107                 *[\ /]"$newobj "*) ;;
8108                 *) if test ! -f "$gentop/$newobj"; then break; fi ;;
8109                 esac
8110               done
8111               func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
8112               oldobjs="$oldobjs $gentop/$newobj"
8113               ;;
8114             *) oldobjs="$oldobjs $obj" ;;
8115             esac
8116           done
8117         fi
8118         eval cmds=\"$old_archive_cmds\"
8119
8120         func_len " $cmds"
8121         len=$func_len_result
8122         if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
8123           cmds=$old_archive_cmds
8124         else
8125           # the command line is too long to link in one step, link in parts
8126           func_verbose "using piecewise archive linking..."
8127           save_RANLIB=$RANLIB
8128           RANLIB=:
8129           objlist=
8130           concat_cmds=
8131           save_oldobjs=$oldobjs
8132           oldobjs=
8133           # Is there a better way of finding the last object in the list?
8134           for obj in $save_oldobjs
8135           do
8136             last_oldobj=$obj
8137           done
8138           eval test_cmds=\"$old_archive_cmds\"
8139           func_len " $test_cmds"
8140           len0=$func_len_result
8141           len=$len0
8142           for obj in $save_oldobjs
8143           do
8144             func_len " $obj"
8145             func_arith $len + $func_len_result
8146             len=$func_arith_result
8147             func_append objlist " $obj"
8148             if test "$len" -lt "$max_cmd_len"; then
8149               :
8150             else
8151               # the above command should be used before it gets too long
8152               oldobjs=$objlist
8153               if test "$obj" = "$last_oldobj" ; then
8154                 RANLIB=$save_RANLIB
8155               fi
8156               test -z "$concat_cmds" || concat_cmds=$concat_cmds~
8157               eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
8158               objlist=
8159               len=$len0
8160             fi
8161           done
8162           RANLIB=$save_RANLIB
8163           oldobjs=$objlist
8164           if test "X$oldobjs" = "X" ; then
8165             eval cmds=\"\$concat_cmds\"
8166           else
8167             eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
8168           fi
8169         fi
8170       fi
8171       func_execute_cmds "$cmds" 'exit $?'
8172     done
8173
8174     test -n "$generated" && \
8175       func_show_eval "${RM}r$generated"
8176
8177     # Now create the libtool archive.
8178     case $output in
8179     *.la)
8180       old_library=
8181       test "$build_old_libs" = yes && old_library="$libname.$libext"
8182       func_verbose "creating $output"
8183
8184       # Preserve any variables that may affect compiler behavior
8185       for var in $variables_saved_for_relink; do
8186         if eval test -z \"\${$var+set}\"; then
8187           relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
8188         elif eval var_value=\$$var; test -z "$var_value"; then
8189           relink_command="$var=; export $var; $relink_command"
8190         else
8191           func_quote_for_eval "$var_value"
8192           relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
8193         fi
8194       done
8195       # Quote the link command for shipping.
8196       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
8197       relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
8198       if test "$hardcode_automatic" = yes ; then
8199         relink_command=
8200       fi
8201
8202       # Only create the output if not a dry run.
8203       $opt_dry_run || {
8204         for installed in no yes; do
8205           if test "$installed" = yes; then
8206             if test -z "$install_libdir"; then
8207               break
8208             fi
8209             output="$output_objdir/$outputname"i
8210             # Replace all uninstalled libtool libraries with the installed ones
8211             newdependency_libs=
8212             for deplib in $dependency_libs; do
8213               case $deplib in
8214               *.la)
8215                 func_basename "$deplib"
8216                 name="$func_basename_result"
8217                 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
8218                 test -z "$libdir" && \
8219                   func_fatal_error "\`$deplib' is not a valid libtool archive"
8220                 newdependency_libs="$newdependency_libs $libdir/$name"
8221                 ;;
8222               *) newdependency_libs="$newdependency_libs $deplib" ;;
8223               esac
8224             done
8225             dependency_libs="$newdependency_libs"
8226             newdlfiles=
8227
8228             for lib in $dlfiles; do
8229               case $lib in
8230               *.la)
8231                 func_basename "$lib"
8232                 name="$func_basename_result"
8233                 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
8234                 test -z "$libdir" && \
8235                   func_fatal_error "\`$lib' is not a valid libtool archive"
8236                 newdlfiles="$newdlfiles $libdir/$name"
8237                 ;;
8238               *) newdlfiles="$newdlfiles $lib" ;;
8239               esac
8240             done
8241             dlfiles="$newdlfiles"
8242             newdlprefiles=
8243             for lib in $dlprefiles; do
8244               case $lib in
8245               *.la)
8246                 # Only pass preopened files to the pseudo-archive (for
8247                 # eventual linking with the app. that links it) if we
8248                 # didn't already link the preopened objects directly into
8249                 # the library:
8250                 func_basename "$lib"
8251                 name="$func_basename_result"
8252                 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
8253                 test -z "$libdir" && \
8254                   func_fatal_error "\`$lib' is not a valid libtool archive"
8255                 newdlprefiles="$newdlprefiles $libdir/$name"
8256                 ;;
8257               esac
8258             done
8259             dlprefiles="$newdlprefiles"
8260           else
8261             newdlfiles=
8262             for lib in $dlfiles; do
8263               case $lib in
8264                 [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
8265                 *) abs=`pwd`"/$lib" ;;
8266               esac
8267               newdlfiles="$newdlfiles $abs"
8268             done
8269             dlfiles="$newdlfiles"
8270             newdlprefiles=
8271             for lib in $dlprefiles; do
8272               case $lib in
8273                 [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
8274                 *) abs=`pwd`"/$lib" ;;
8275               esac
8276               newdlprefiles="$newdlprefiles $abs"
8277             done
8278             dlprefiles="$newdlprefiles"
8279           fi
8280           $RM $output
8281           # place dlname in correct position for cygwin
8282           # In fact, it would be nice if we could use this code for all target
8283           # systems that can't hard-code library paths into their executables
8284           # and that have no shared library path variable independent of PATH,
8285           # but it turns out we can't easily determine that from inspecting
8286           # libtool variables, so we have to hard-code the OSs to which it
8287           # applies here; at the moment, that means platforms that use the PE
8288           # object format with DLL files.  See the long comment at the top of
8289           # tests/bindir.at for full details.
8290           tdlname=$dlname
8291           case $host,$output,$installed,$module,$dlname in
8292             *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
8293               # If a -bindir argument was supplied, place the dll there.
8294               if test "x$bindir" != x ;
8295               then
8296                 func_relative_path "$install_libdir" "$bindir"
8297                 tdlname=$func_relative_path_result$dlname
8298               else
8299                 # Otherwise fall back on heuristic.
8300                 tdlname=../bin/$dlname
8301               fi
8302               ;;
8303           esac
8304           $ECHO > $output "\
8305 # $outputname - a libtool library file
8306 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
8307 #
8308 # Please DO NOT delete this file!
8309 # It is necessary for linking the library.
8310
8311 # The name that we can dlopen(3).
8312 dlname='$tdlname'
8313
8314 # Names of this library.
8315 library_names='$library_names'
8316
8317 # The name of the static archive.
8318 old_library='$old_library'
8319
8320 # Linker flags that can not go in dependency_libs.
8321 inherited_linker_flags='$new_inherited_linker_flags'
8322
8323 # Libraries that this one depends upon.
8324 dependency_libs='$dependency_libs'
8325
8326 # Names of additional weak libraries provided by this library
8327 weak_library_names='$weak_libs'
8328
8329 # Version information for $libname.
8330 current=$current
8331 age=$age
8332 revision=$revision
8333
8334 # Is this an already installed library?
8335 installed=$installed
8336
8337 # Should we warn about portability when linking against -modules?
8338 shouldnotlink=$module
8339
8340 # Files to dlopen/dlpreopen
8341 dlopen='$dlfiles'
8342 dlpreopen='$dlprefiles'
8343
8344 # Directory that this library needs to be installed in:
8345 libdir='$install_libdir'"
8346           if test "$installed" = no && test "$need_relink" = yes; then
8347             $ECHO >> $output "\
8348 relink_command=\"$relink_command\""
8349           fi
8350         done
8351       }
8352
8353       # Do a symbolic link so that the libtool archive can be found in
8354       # LD_LIBRARY_PATH before the program is installed.
8355       func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
8356       ;;
8357     esac
8358     exit $EXIT_SUCCESS
8359 }
8360
8361 { test "$mode" = link || test "$mode" = relink; } &&
8362     func_mode_link ${1+"$@"}
8363
8364
8365 # func_mode_uninstall arg...
8366 func_mode_uninstall ()
8367 {
8368     $opt_debug
8369     RM="$nonopt"
8370     files=
8371     rmforce=
8372     exit_status=0
8373
8374     # This variable tells wrapper scripts just to set variables rather
8375     # than running their programs.
8376     libtool_install_magic="$magic"
8377
8378     for arg
8379     do
8380       case $arg in
8381       -f) RM="$RM $arg"; rmforce=yes ;;
8382       -*) RM="$RM $arg" ;;
8383       *) files="$files $arg" ;;
8384       esac
8385     done
8386
8387     test -z "$RM" && \
8388       func_fatal_help "you must specify an RM program"
8389
8390     rmdirs=
8391
8392     origobjdir="$objdir"
8393     for file in $files; do
8394       func_dirname "$file" "" "."
8395       dir="$func_dirname_result"
8396       if test "X$dir" = X.; then
8397         objdir="$origobjdir"
8398       else
8399         objdir="$dir/$origobjdir"
8400       fi
8401       func_basename "$file"
8402       name="$func_basename_result"
8403       test "$mode" = uninstall && objdir="$dir"
8404
8405       # Remember objdir for removal later, being careful to avoid duplicates
8406       if test "$mode" = clean; then
8407         case " $rmdirs " in
8408           *" $objdir "*) ;;
8409           *) rmdirs="$rmdirs $objdir" ;;
8410         esac
8411       fi
8412
8413       # Don't error if the file doesn't exist and rm -f was used.
8414       if { test -L "$file"; } >/dev/null 2>&1 ||
8415          { test -h "$file"; } >/dev/null 2>&1 ||
8416          test -f "$file"; then
8417         :
8418       elif test -d "$file"; then
8419         exit_status=1
8420         continue
8421       elif test "$rmforce" = yes; then
8422         continue
8423       fi
8424
8425       rmfiles="$file"
8426
8427       case $name in
8428       *.la)
8429         # Possibly a libtool archive, so verify it.
8430         if func_lalib_p "$file"; then
8431           func_source $dir/$name
8432
8433           # Delete the libtool libraries and symlinks.
8434           for n in $library_names; do
8435             rmfiles="$rmfiles $objdir/$n"
8436           done
8437           test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
8438
8439           case "$mode" in
8440           clean)
8441             case "  $library_names " in
8442             # "  " in the beginning catches empty $dlname
8443             *" $dlname "*) ;;
8444             *) rmfiles="$rmfiles $objdir/$dlname" ;;
8445             esac
8446             test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
8447             ;;
8448           uninstall)
8449             if test -n "$library_names"; then
8450               # Do each command in the postuninstall commands.
8451               func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
8452             fi
8453
8454             if test -n "$old_library"; then
8455               # Do each command in the old_postuninstall commands.
8456               func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
8457             fi
8458             # FIXME: should reinstall the best remaining shared library.
8459             ;;
8460           esac
8461         fi
8462         ;;
8463
8464       *.lo)
8465         # Possibly a libtool object, so verify it.
8466         if func_lalib_p "$file"; then
8467
8468           # Read the .lo file
8469           func_source $dir/$name
8470
8471           # Add PIC object to the list of files to remove.
8472           if test -n "$pic_object" &&
8473              test "$pic_object" != none; then
8474             rmfiles="$rmfiles $dir/$pic_object"
8475           fi
8476
8477           # Add non-PIC object to the list of files to remove.
8478           if test -n "$non_pic_object" &&
8479              test "$non_pic_object" != none; then
8480             rmfiles="$rmfiles $dir/$non_pic_object"
8481           fi
8482         fi
8483         ;;
8484
8485       *)
8486         if test "$mode" = clean ; then
8487           noexename=$name
8488           case $file in
8489           *.exe)
8490             func_stripname '' '.exe' "$file"
8491             file=$func_stripname_result
8492             func_stripname '' '.exe' "$name"
8493             noexename=$func_stripname_result
8494             # $file with .exe has already been added to rmfiles,
8495             # add $file without .exe
8496             rmfiles="$rmfiles $file"
8497             ;;
8498           esac
8499           # Do a test to see if this is a libtool program.
8500           if func_ltwrapper_p "$file"; then
8501             if func_ltwrapper_executable_p "$file"; then
8502               func_ltwrapper_scriptname "$file"
8503               relink_command=
8504               func_source $func_ltwrapper_scriptname_result
8505               rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
8506             else
8507               relink_command=
8508               func_source $dir/$noexename
8509             fi
8510
8511             # note $name still contains .exe if it was in $file originally
8512             # as does the version of $file that was added into $rmfiles
8513             rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
8514             if test "$fast_install" = yes && test -n "$relink_command"; then
8515               rmfiles="$rmfiles $objdir/lt-$name"
8516             fi
8517             if test "X$noexename" != "X$name" ; then
8518               rmfiles="$rmfiles $objdir/lt-${noexename}.c"
8519             fi
8520           fi
8521         fi
8522         ;;
8523       esac
8524       func_show_eval "$RM $rmfiles" 'exit_status=1'
8525     done
8526     objdir="$origobjdir"
8527
8528     # Try to remove the ${objdir}s in the directories where we deleted files
8529     for dir in $rmdirs; do
8530       if test -d "$dir"; then
8531         func_show_eval "rmdir $dir >/dev/null 2>&1"
8532       fi
8533     done
8534
8535     exit $exit_status
8536 }
8537
8538 { test "$mode" = uninstall || test "$mode" = clean; } &&
8539     func_mode_uninstall ${1+"$@"}
8540
8541 test -z "$mode" && {
8542   help="$generic_help"
8543   func_fatal_help "you must specify a MODE"
8544 }
8545
8546 test -z "$exec_cmd" && \
8547   func_fatal_help "invalid operation mode \`$mode'"
8548
8549 if test -n "$exec_cmd"; then
8550   eval exec "$exec_cmd"
8551   exit $EXIT_FAILURE
8552 fi
8553
8554 exit $exit_status
8555
8556
8557 # The TAGs below are defined such that we never get into a situation
8558 # in which we disable both kinds of libraries.  Given conflicting
8559 # choices, we go for a static library, that is the most portable,
8560 # since we can't tell whether shared libraries were disabled because
8561 # the user asked for that or because the platform doesn't support
8562 # them.  This is particularly important on AIX, because we don't
8563 # support having both static and shared libraries enabled at the same
8564 # time on that platform, so we default to a shared-only configuration.
8565 # If a disable-shared tag is given, we'll fallback to a static-only
8566 # configuration.  But we'll never go from static-only to shared-only.
8567
8568 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
8569 build_libtool_libs=no
8570 build_old_libs=yes
8571 # ### END LIBTOOL TAG CONFIG: disable-shared
8572
8573 # ### BEGIN LIBTOOL TAG CONFIG: disable-static
8574 build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
8575 # ### END LIBTOOL TAG CONFIG: disable-static
8576
8577 # Local Variables:
8578 # mode:shell-script
8579 # sh-indentation:2
8580 # End:
8581 # vi:sw=2