| blob | 00b39c223f3a66a6d499d5c5515c1591bd7c1e12 |
1 /* FRV-specific support for 32-bit ELF.
2 Copyright 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
3 Free Software Foundation, Inc.
5 This file is part of BFD, the Binary File Descriptor library.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
20 MA 02110-1301, USA. */
30 /* Forward declarations. */
31 static bfd_reloc_status_type elf32_frv_relocate_lo16
33 static bfd_reloc_status_type elf32_frv_relocate_hi16
35 static bfd_reloc_status_type elf32_frv_relocate_label24
37 static bfd_reloc_status_type elf32_frv_relocate_gprel12
40 static bfd_reloc_status_type elf32_frv_relocate_gprelu12
43 static bfd_reloc_status_type elf32_frv_relocate_gprello
46 static bfd_reloc_status_type elf32_frv_relocate_gprelhi
51 static void frv_info_to_howto_rela
53 static bfd_boolean elf32_frv_relocate_section
56 static bfd_boolean elf32_frv_add_symbol_hook
59 static bfd_reloc_status_type frv_final_link_relocate
62 static bfd_boolean elf32_frv_check_relocs
65 static int elf32_frv_machine
67 static bfd_boolean elf32_frv_object_p
69 static bfd_boolean frv_elf_set_private_flags
71 static bfd_boolean frv_elf_copy_private_bfd_data
73 static bfd_boolean frv_elf_merge_private_bfd_data
75 static bfd_boolean frv_elf_print_private_bfd_data
83 {
84 /* This reloc does nothing. */
99 /* A 32 bit absolute relocation. */
114 /* A 16 bit pc-relative relocation. */
129 /* A 24-bit pc-relative relocation. */
242 /* A 12-bit signed operand with the GOT offset for the address of
243 the symbol. */
258 /* The upper 16 bits of the GOT offset for the address of the
259 symbol. */
274 /* The lower 16 bits of the GOT offset for the address of the
275 symbol. */
290 /* The 32-bit address of the canonical descriptor of a function. */
305 /* A 12-bit signed operand with the GOT offset for the address of
306 canonical descriptor of a function. */
321 /* The upper 16 bits of the GOT offset for the address of the
322 canonical descriptor of a function. */
337 /* The lower 16 bits of the GOT offset for the address of the
338 canonical descriptor of a function. */
353 /* The 64-bit descriptor of a function. */
368 /* A 12-bit signed operand with the GOT offset for the address of
369 canonical descriptor of a function. */
384 /* The upper 16 bits of the GOT offset for the address of the
385 canonical descriptor of a function. */
400 /* The lower 16 bits of the GOT offset for the address of the
401 canonical descriptor of a function. */
416 /* A 12-bit signed operand with the GOT offset for the address of
417 the symbol. */
432 /* The upper 16 bits of the GOT offset for the address of the
433 symbol. */
448 /* The lower 16 bits of the GOT offset for the address of the
449 symbol. */
464 /* A 24-bit pc-relative relocation referencing the TLS PLT entry for
465 a thread-local symbol. If the symbol number is 0, it refers to
466 the module. */
481 /* A 64-bit TLS descriptor for a symbol. This relocation is only
482 valid as a REL, dynamic relocation. */
497 /* A 12-bit signed operand with the GOT offset for the TLS
498 descriptor of the symbol. */
513 /* The upper 16 bits of the GOT offset for the TLS descriptor of the
514 symbol. */
529 /* The lower 16 bits of the GOT offset for the TLS descriptor of the
530 symbol. */
545 /* A 12-bit signed operand with the offset from the module base
546 address to the thread-local symbol address. */
561 /* The upper 16 bits of the offset from the module base address to
562 the thread-local symbol address. */
577 /* The lower 16 bits of the offset from the module base address to
578 the thread-local symbol address. */
593 /* A 12-bit signed operand with the GOT offset for the TLSOFF entry
594 for a symbol. */
609 /* The upper 16 bits of the GOT offset for the TLSOFF entry for a
610 symbol. */
625 /* The lower 16 bits of the GOT offset for the TLSOFF entry for a
626 symbol. */
641 /* The 32-bit offset from the thread pointer (not the module base
642 address) to a thread-local symbol. */
657 /* An annotation for linker relaxation, that denotes the
658 symbol+addend whose TLS descriptor is referenced by the sum of
659 the two input registers of an ldd instruction. */
674 /* An annotation for linker relaxation, that denotes the
675 symbol+addend whose TLS resolver entry point is given by the sum
676 of the two register operands of an calll instruction. */
691 /* An annotation for linker relaxation, that denotes the
692 symbol+addend whose TLS offset GOT entry is given by the sum of
693 the two input registers of an ld instruction. */
708 /* A 32-bit offset from the module base address to
709 the thread-local symbol address. */
723 };
725 /* GNU extension to record C++ vtable hierarchy. */
741 /* GNU extension to record C++ vtable member usage. */
757 /* The following 3 relocations are REL. The only difference to the
758 entries in the table above are that partial_inplace is TRUE. */
805 /* A 64-bit TLS descriptor for a symbol. The first word resolves to
806 an entry point, and the second resolves to a special argument.
807 If the symbol turns out to be in static TLS, the entry point is a
808 return instruction, and the special argument is the TLS offset
809 for the symbol. If it's in dynamic TLS, the entry point is a TLS
810 offset resolver, and the special argument is a pointer to a data
811 structure allocated by the dynamic loader, containing the GOT
812 address for the offset resolver, the module id, the offset within
813 the module, and anything else the TLS offset resolver might need
814 to determine the TLS offset for the symbol in the running
815 thread. */
831 /* The 32-bit offset from the thread pointer (not the module base
832 address) to a thread-local symbol. */
848 \f
850 #define IS_FDPIC(bfd) ((bfd)->xvec == &bfd_elf32_frvfdpic_vec)
852 /* An extension of the elf hash table data structure, containing some
853 additional FRV-specific data. */
854 struct frvfdpic_elf_link_hash_table
855 {
858 /* A pointer to the .got section. */
860 /* A pointer to the .rel.got section. */
862 /* A pointer to the .rofixup section. */
864 /* A pointer to the .plt section. */
866 /* A pointer to the .rel.plt section. */
868 /* GOT base offset. */
869 bfd_vma got0;
870 /* Location of the first non-lazy PLT entry, i.e., the number of
871 bytes taken by lazy PLT entries. If locally-bound TLS
872 descriptors require a ret instruction, it will be placed at this
873 offset. */
874 bfd_vma plt0;
875 /* A hash table holding information about which symbols were
876 referenced with which PIC-related relocations. */
878 /* Summary reloc information collected by
879 _frvfdpic_count_got_plt_entries. */
881 };
883 /* Get the FRV ELF linker hash table from a link_info structure. */
885 #define frvfdpic_hash_table(info) \
886 ((struct frvfdpic_elf_link_hash_table *) ((info)->hash))
888 #define frvfdpic_got_section(info) \
889 (frvfdpic_hash_table (info)->sgot)
890 #define frvfdpic_gotrel_section(info) \
891 (frvfdpic_hash_table (info)->sgotrel)
892 #define frvfdpic_gotfixup_section(info) \
893 (frvfdpic_hash_table (info)->sgotfixup)
894 #define frvfdpic_plt_section(info) \
895 (frvfdpic_hash_table (info)->splt)
896 #define frvfdpic_pltrel_section(info) \
897 (frvfdpic_hash_table (info)->spltrel)
898 #define frvfdpic_relocs_info(info) \
899 (frvfdpic_hash_table (info)->relocs_info)
900 #define frvfdpic_got_initial_offset(info) \
901 (frvfdpic_hash_table (info)->got0)
902 #define frvfdpic_plt_initial_offset(info) \
903 (frvfdpic_hash_table (info)->plt0)
904 #define frvfdpic_dynamic_got_plt_info(info) \
905 (frvfdpic_hash_table (info)->g)
907 /* Currently it's the same, but if some day we have a reason to change
908 it, we'd better be using a different macro.
910 FIXME: if there's any TLS PLT entry that uses local-exec or
911 initial-exec models, we could use the ret at the end of any of them
912 instead of adding one more. */
913 #define frvfdpic_plt_tls_ret_offset(info) \
914 (frvfdpic_plt_initial_offset (info))
916 /* The name of the dynamic interpreter. This is put in the .interp
917 section. */
921 #define DEFAULT_STACK_SIZE 0x20000
923 /* This structure is used to collect the number of entries present in
924 each addressable range of the got. */
925 struct _frvfdpic_dynamic_got_info
926 {
927 /* Several bits of information about the current link. */
929 /* Total GOT size needed for GOT entries within the 12-, 16- or 32-bit
930 ranges. */
932 /* Total GOT size needed for function descriptor entries within the 12-,
933 16- or 32-bit ranges. */
935 /* Total GOT size needed by function descriptor entries referenced
936 in PLT entries, that would be profitable to place in offsets
937 close to the PIC register. */
938 bfd_vma fdplt;
939 /* Total PLT size needed by lazy PLT entries. */
940 bfd_vma lzplt;
941 /* Total GOT size needed for TLS descriptor entries within the 12-,
942 16- or 32-bit ranges. */
944 /* Total GOT size needed by TLS descriptors referenced in PLT
945 entries, that would be profitable to place in offers close to the
946 PIC register. */
947 bfd_vma tlsdplt;
948 /* Total PLT size needed by TLS lazy PLT entries. */
949 bfd_vma tlslzplt;
950 /* Number of relocations carried over from input object files. */
952 /* Number of fixups introduced by relocations in input object files. */
954 /* The number of fixups that reference the ret instruction added to
955 the PLT for locally-resolved TLS descriptors. */
957 };
959 /* This structure is used to assign offsets to got entries, function
960 descriptors, plt entries and lazy plt entries. */
962 struct _frvfdpic_dynamic_got_plt_info
963 {
964 /* Summary information collected with _frvfdpic_count_got_plt_entries. */
967 /* For each addressable range, we record a MAX (positive) and MIN
968 (negative) value. CUR is used to assign got entries, and it's
969 incremented from an initial positive value to MAX, then from MIN
970 to FDCUR (unless FDCUR wraps around first). FDCUR is used to
971 assign function descriptors, and it's decreased from an initial
972 non-positive value to MIN, then from MAX down to CUR (unless CUR
973 wraps around first). All of MIN, MAX, CUR and FDCUR always point
974 to even words. ODD, if non-zero, indicates an odd word to be
975 used for the next got entry, otherwise CUR is used and
976 incremented by a pair of words, wrapping around when it reaches
977 MAX. FDCUR is decremented (and wrapped) before the next function
978 descriptor is chosen. FDPLT indicates the number of remaining
979 slots that can be used for function descriptors used only by PLT
980 entries.
982 TMAX, TMIN and TCUR are used to assign TLS descriptors. TCUR
983 starts as MAX, and grows up to TMAX, then wraps around to TMIN
984 and grows up to MIN. TLSDPLT indicates the number of remaining
985 slots that can be used for TLS descriptors used only by TLS PLT
986 entries. */
987 struct _frvfdpic_dynamic_got_alloc_data
988 {
993 };
995 /* Create an FRV ELF linker hash table. */
999 {
1008 _bfd_elf_link_hash_newfunc,
1010 {
1013 }
1016 }
1018 /* Decide whether a reference to a symbol can be resolved locally or
1019 not. If the symbol is protected, we want the local address, but
1020 its function descriptor must be assigned by the dynamic linker. */
1021 #define FRVFDPIC_SYM_LOCAL(INFO, H) \
1022 (_bfd_elf_symbol_refs_local_p ((H), (INFO), 1) \
1023 || ! elf_hash_table (INFO)->dynamic_sections_created)
1024 #define FRVFDPIC_FUNCDESC_LOCAL(INFO, H) \
1025 ((H)->dynindx == -1 || ! elf_hash_table (INFO)->dynamic_sections_created)
1027 /* This structure collects information on what kind of GOT, PLT or
1028 function descriptors are required by relocations that reference a
1029 certain symbol. */
1030 struct frvfdpic_relocs_info
1031 {
1032 /* The index of the symbol, as stored in the relocation r_info, if
1033 we have a local symbol; -1 otherwise. */
1035 union
1036 {
1037 /* The input bfd in which the symbol is defined, if it's a local
1038 symbol. */
1040 /* If symndx == -1, the hash table entry corresponding to a global
1041 symbol (even if it turns out to bind locally, in which case it
1042 should ideally be replaced with section's symndx + addend). */
1045 /* The addend of the relocation that references the symbol. */
1046 bfd_vma addend;
1048 /* The fields above are used to identify an entry. The fields below
1049 contain information on how an entry is used and, later on, which
1050 locations it was assigned. */
1051 /* The following 3 fields record whether the symbol+addend above was
1052 ever referenced with a GOT relocation. The 12 suffix indicates a
1053 GOT12 relocation; los is used for GOTLO relocations that are not
1054 matched by a GOTHI relocation; hilo is used for GOTLO/GOTHI
1055 pairs. */
1059 /* Whether a FUNCDESC relocation references symbol+addend. */
1061 /* Whether a FUNCDESC_GOT relocation references symbol+addend. */
1065 /* Whether a FUNCDESC_GOTOFF relocation references symbol+addend. */
1069 /* Whether a GETTLSOFF relocation references symbol+addend. */
1071 /* FIXME: we should probably add tlspltdesc, tlspltoff and
1072 tlspltimm, to tell what kind of TLS PLT entry we're generating.
1073 We might instead just pre-compute flags telling whether the
1074 object is suitable for local exec, initial exec or general
1075 dynamic addressing, and use that all over the place. We could
1076 also try to do a better job of merging TLSOFF and TLSDESC entries
1077 in main executables, but perhaps we can get rid of TLSDESC
1078 entirely in them instead. */
1079 /* Whether a GOTTLSDESC relocation references symbol+addend. */
1083 /* Whether a GOTTLSOFF relocation references symbol+addend. */
1087 /* Whether symbol+addend is referenced with GOTOFF12, GOTOFFLO or
1088 GOTOFFHI relocations. The addend doesn't really matter, since we
1089 envision that this will only be used to check whether the symbol
1090 is mapped to the same segment as the got. */
1092 /* Whether symbol+addend is referenced by a LABEL24 relocation. */
1094 /* Whether symbol+addend is referenced by a 32 or FUNCDESC_VALUE
1095 relocation. */
1097 /* Whether we need a PLT entry for a symbol. Should be implied by
1098 something like:
1099 (call && symndx == -1 && ! FRVFDPIC_SYM_LOCAL (info, d.h)) */
1101 /* Whether a function descriptor should be created in this link unit
1102 for symbol+addend. Should be implied by something like:
1103 (plt || fdgotoff12 || fdgotofflos || fdgotofflohi
1104 || ((fd || fdgot12 || fdgotlos || fdgothilo)
1105 && (symndx != -1 || FRVFDPIC_FUNCDESC_LOCAL (info, d.h)))) */
1107 /* Whether a lazy PLT entry is needed for this symbol+addend.
1108 Should be implied by something like:
1109 (privfd && symndx == -1 && ! FRVFDPIC_SYM_LOCAL (info, d.h)
1110 && ! (info->flags & DF_BIND_NOW)) */
1112 /* Whether we've already emitted GOT relocations and PLT entries as
1113 needed for this symbol. */
1116 /* The number of R_FRV_32, R_FRV_FUNCDESC, R_FRV_FUNCDESC_VALUE and
1117 R_FRV_TLSDESC_VALUE, R_FRV_TLSOFF relocations referencing
1118 symbol+addend. */
1121 /* The number of .rofixups entries and dynamic relocations allocated
1122 for this symbol, minus any that might have already been used. */
1125 /* The offsets of the GOT entries assigned to symbol+addend, to the
1126 function descriptor's address, and to a function descriptor,
1127 respectively. Should be zero if unassigned. The offsets are
1128 counted from the value that will be assigned to the PIC register,
1129 not from the beginning of the .got section. */
1131 /* The offsets of the PLT entries assigned to symbol+addend,
1132 non-lazy and lazy, respectively. If unassigned, should be
1133 (bfd_vma)-1. */
1135 /* The offsets of the GOT entries for TLS offset and TLS descriptor. */
1137 /* The offset of the TLS offset PLT entry. */
1138 bfd_vma tlsplt_entry;
1139 };
1141 /* Compute a hash with the key fields of an frvfdpic_relocs_info entry. */
1142 static hashval_t
1144 {
1150 }
1152 /* Test whether the key fields of two frvfdpic_relocs_info entries are
1153 identical. */
1154 static int
1156 {
1162 }
1164 /* Find or create an entry in a hash table HT that matches the key
1165 fields of the given ENTRY. If it's not found, memory for a new
1166 entry is allocated in ABFD's obstack. */
1172 {
1195 }
1197 /* Obtain the address of the entry in HT associated with H's symbol +
1198 addend, creating a new entry if none existed. ABFD is only used
1199 for memory allocation purposes. */
1204 bfd_vma addend,
1206 {
1214 }
1216 /* Obtain the address of the entry in HT associated with the SYMNDXth
1217 local symbol of the input bfd ABFD, plus the addend, creating a new
1218 entry if none existed. */
1223 bfd_vma addend,
1225 {
1233 }
1235 /* Merge fields set by check_relocs() of two entries that end up being
1236 mapped to the same (presumably global) symbol. */
1241 {
1262 }
1264 /* Every block of 65535 lazy PLT entries shares a single call to the
1265 resolver, inserted in the 32768th lazy PLT entry (i.e., entry #
1266 32767, counting from 0). All other lazy PLT entries branch to it
1267 in a single instruction. */
1269 #define FRVFDPIC_LZPLT_BLOCK_SIZE ((bfd_vma) 8 * 65535 + 4)
1270 #define FRVFDPIC_LZPLT_RESOLV_LOC (8 * 32767)
1272 /* Add a dynamic relocation to the SRELOC section. */
1278 {
1279 Elf_Internal_Rela outrel;
1280 bfd_vma reloc_offset;
1292 /* If the entry's index is zero, this relocation was probably to a
1293 linkonce section that got discarded. We reserved a dynamic
1294 relocation, but it was for another entry than the one we got at
1295 the time of emitting the relocation. Unfortunately there's no
1296 simple way for us to catch this situation, since the relocation
1297 is cleared right before calling relocate_section, at which point
1298 we no longer know what the relocation used to point to. */
1300 {
1303 }
1306 }
1308 /* Add a fixup to the ROFIXUP section. */
1310 static bfd_vma
1313 {
1314 bfd_vma fixup_offset;
1321 {
1324 }
1328 {
1329 /* See discussion about symndx == 0 in _frvfdpic_add_dyn_reloc
1330 above. */
1333 }
1336 }
1338 /* Find the segment number in which OSEC, and output section, is
1339 located. */
1341 static unsigned
1343 {
1347 }
1351 {
1355 }
1357 #define FRVFDPIC_TLS_BIAS (2048 - 16)
1359 /* Return the base VMA address which should be subtracted from real addresses
1360 when resolving TLSMOFF relocation.
1361 This is PT_TLS segment p_vaddr, plus the 2048-16 bias. */
1363 static bfd_vma
1365 {
1366 /* If tls_sec is NULL, we should have signalled an error already. */
1370 }
1372 /* Generate relocations for GOT entries, function descriptors, and
1373 code for PLT and lazy PLT entries. */
1381 bfd_vma addend)
1383 {
1393 {
1394 /* If the symbol is dynamic, consider it for dynamic
1395 relocations, otherwise decay to section + offset. */
1398 else
1399 {
1405 else
1407 }
1408 }
1410 /* Generate relocation for GOT entry pointing to the symbol. */
1412 {
1416 /* If the symbol is dynamic but binds locally, use
1417 section+offset. */
1420 {
1423 else
1428 else
1430 }
1432 /* If we're linking an executable at a fixed address, we can
1433 omit the dynamic relocation as long as the symbol is local to
1434 this module. */
1438 {
1446 ->vma
1450 }
1451 else
1453 _bfd_elf_section_offset
1467 }
1469 /* Generate relocation for GOT entry pointing to a canonical
1470 function descriptor. */
1472 {
1479 {
1480 /* If the symbol is dynamic and there may be dynamic symbol
1481 resolution because we are, or are linked with, a shared
1482 library, emit a FUNCDESC relocation such that the dynamic
1483 linker will allocate the function descriptor. If the
1484 symbol needs a non-local function descriptor but binds
1485 locally (e.g., its visibility is protected, emit a
1486 dynamic relocation decayed to section+offset. */
1491 {
1497 }
1500 {
1505 {
1512 }
1513 }
1514 else
1515 {
1516 /* Otherwise, we know we have a private function descriptor,
1517 so reference it directly. */
1525 }
1527 /* If there is room for dynamic symbol resolution, emit the
1528 dynamic relocation. However, if we're linking an
1529 executable at a fixed location, we won't have emitted a
1530 dynamic symbol entry for the got section, so idx will be
1531 zero, which means we can and should compute the address
1532 of the private descriptor ourselves. */
1536 {
1543 ->output_offset
1546 }
1547 else
1550 _bfd_elf_section_offset
1560 }
1566 }
1568 /* Generate relocation to fill in a private function descriptor in
1569 the GOT. */
1571 {
1574 bfd_vma ofst;
1577 /* If the symbol is dynamic but binds locally, use
1578 section+offset. */
1581 {
1584 else
1589 else
1591 }
1593 /* If we're linking an executable at a fixed address, we can
1594 omit the dynamic relocation as long as the symbol is local to
1595 this module. */
1598 {
1604 {
1610 ->output_offset
1618 ->output_offset
1621 }
1622 }
1623 else
1624 {
1625 ofst =
1627 entry->lazyplt
1630 _bfd_elf_section_offset
1640 }
1642 /* If we've omitted the dynamic relocation, just emit the fixed
1643 addresses of the symbol and of the local GOT base offset. */
1645 {
1650 }
1652 {
1654 {
1661 }
1665 /* A function descriptor used for lazy or local resolving is
1666 initialized such that its high word contains the output
1667 section index in which the PLT entries are located, and
1668 the low word contains the address of the lazy PLT entry
1669 entry point, that must be within the memory region
1670 assigned to that section. */
1674 highword = _frvfdpic_osec_to_segment
1676 }
1677 else
1678 {
1679 /* A function descriptor for a local function gets the index
1680 of the section. For a non-local function, it's
1681 disregarded. */
1687 else
1688 highword = _frvfdpic_osec_to_segment
1690 }
1700 }
1702 /* Generate code for the PLT entry. */
1704 {
1710 /* Figure out what kind of PLT entry we need, depending on the
1711 location of the function descriptor within the GOT. */
1714 {
1715 /* lddi @(gr15, fd_entry), gr14 */
1718 plt_code);
1720 }
1721 else
1722 {
1725 {
1726 /* setlos lo(fd_entry), gr14 */
1728 0x9cfc0000
1730 plt_code);
1732 }
1733 else
1734 {
1735 /* sethi.p hi(fd_entry), gr14
1736 setlo lo(fd_entry), gr14 */
1738 0x1cf80000
1741 plt_code);
1744 0x9cf40000
1746 plt_code);
1748 }
1749 /* ldd @(gr14,gr15),gr14 */
1752 }
1753 /* jmpl @(gr14,gr0) */
1755 }
1757 /* Generate code for the lazy PLT entry. */
1759 {
1762 bfd_vma resolverStub_addr;
1773 {
1774 /* This is a lazy PLT entry that includes a resolver call. */
1775 /* ldd @(gr15,gr0), gr4
1776 jmpl @(gr4,gr0) */
1779 }
1780 else
1781 {
1782 /* bra resolverStub */
1784 0xc01a0000
1787 lzplt_code);
1788 }
1789 }
1791 /* Generate relocation for GOT entry holding the TLS offset. */
1793 {
1799 {
1800 /* If the symbol is dynamic but binds locally, use
1801 section+offset. */
1803 {
1806 else
1812 else
1814 }
1815 }
1817 /* *ABS*+addend is special for TLS relocations, use only the
1818 addend. */
1823 ;
1824 /* If we're linking an executable, we can entirely omit the
1825 dynamic relocation if the symbol is local to this module. */
1829 {
1832 }
1833 else
1834 {
1838 {
1840 {
1845 }
1848 }
1850 _bfd_elf_section_offset
1860 }
1866 }
1869 {
1873 /* If the symbol is dynamic but binds locally, use
1874 section+offset. */
1877 {
1880 else
1885 else
1887 }
1889 /* If we didn't set up a TLS offset entry, but we're linking an
1890 executable and the symbol binds locally, we can use the
1891 module offset in the TLS descriptor in relaxations. */
1901 {
1902 /* *ABS*+addend is special for TLS relocations, use only the
1903 addend for the TLS offset, and take the module id as
1904 0. */
1908 ;
1909 /* For other TLS symbols that bind locally, add the section
1910 TLS offset to the addend. */
1927 ->output_offset
1933 /* We've used one of the reserved fixups, so discount it so
1934 that we can check at the end that we've used them
1935 all. */
1938 /* While at that, make sure the ret instruction makes to the
1939 right location in the PLT. We could do it only when we
1940 got to 0, but since the check at the end will only print
1941 a warning, make sure we have the ret in place in case the
1942 warning is missed. */
1946 }
1947 else
1948 {
1952 {
1954 {
1959 }
1962 }
1965 _bfd_elf_section_offset
1980 }
1986 }
1988 /* Generate code for the get-TLS-offset PLT entry. */
1990 {
1997 {
2001 /* sec may be NULL when referencing an undefweak symbol
2002 while linking a static executable. */
2004 {
2007 }
2008 else
2009 {
2012 else
2018 else
2020 }
2022 /* *ABS*+addend is special for TLS relocations, use only the
2023 addend for the TLS offset, and take the module id as
2024 0. */
2028 ;
2029 /* For other TLS symbols that bind locally, add the section
2030 TLS offset to the addend. */
2036 {
2037 /* setlos lo(ad), gr9 */
2039 0x92fc0000
2040 | (ad
2042 plt_code);
2044 }
2045 else
2046 {
2047 /* sethi.p hi(ad), gr9
2048 setlo lo(ad), gr9 */
2050 0x12f80000
2053 plt_code);
2056 0x92f40000
2057 | (ad
2059 plt_code);
2061 }
2062 /* ret */
2064 }
2066 {
2067 /* Figure out what kind of PLT entry we need, depending on the
2068 location of the TLS descriptor within the GOT. */
2071 {
2072 /* ldi @(gr15, tlsoff_entry), gr9 */
2076 plt_code);
2078 }
2079 else
2080 {
2083 {
2084 /* setlos lo(tlsoff_entry), gr8 */
2086 0x90fc0000
2089 plt_code);
2091 }
2092 else
2093 {
2094 /* sethi.p hi(tlsoff_entry), gr8
2095 setlo lo(tlsoff_entry), gr8 */
2097 0x10f80000
2100 plt_code);
2103 0x90f40000
2106 plt_code);
2108 }
2109 /* ld @(gr15,gr8),gr9 */
2112 }
2113 /* ret */
2115 }
2116 else
2117 {
2120 /* Figure out what kind of PLT entry we need, depending on the
2121 location of the TLS descriptor within the GOT. */
2124 {
2125 /* lddi @(gr15, tlsdesc_entry), gr8 */
2129 plt_code);
2131 }
2132 else
2133 {
2136 {
2137 /* setlos lo(tlsdesc_entry), gr8 */
2139 0x90fc0000
2142 plt_code);
2144 }
2145 else
2146 {
2147 /* sethi.p hi(tlsdesc_entry), gr8
2148 setlo lo(tlsdesc_entry), gr8 */
2150 0x10f80000
2153 plt_code);
2156 0x90f40000
2159 plt_code);
2161 }
2162 /* ldd @(gr15,gr8),gr8 */
2165 }
2166 /* jmpl @(gr8,gr0) */
2168 }
2169 }
2172 }
2174 /* Handle an FRV small data reloc. */
2176 static bfd_reloc_status_type
2184 bfd_vma value;
2185 {
2186 bfd_vma insn;
2187 bfd_vma gp;
2211 }
2213 /* Handle an FRV small data reloc. for the u12 field. */
2215 static bfd_reloc_status_type
2223 bfd_vma value;
2224 {
2225 bfd_vma insn;
2226 bfd_vma gp;
2228 bfd_vma mask;
2246 /* The high 6 bits go into bits 17-12. The low 6 bits go into bits 5-0. */
2253 }
2255 /* Handle an FRV ELF HI16 reloc. */
2257 static bfd_reloc_status_type
2262 bfd_vma value;
2263 {
2264 bfd_vma insn;
2279 }
2280 static bfd_reloc_status_type
2285 bfd_vma value;
2286 {
2287 bfd_vma insn;
2301 }
2303 /* Perform the relocation for the CALL label24 instruction. */
2305 static bfd_reloc_status_type
2311 bfd_vma value;
2312 {
2313 bfd_vma insn;
2314 bfd_vma label6;
2315 bfd_vma label18;
2317 /* The format for the call instruction is:
2319 0 000000 0001111 000000000000000000
2320 label6 opcode label18
2322 The branch calculation is: pc + (4*label24)
2323 where label24 is the concatenation of label6 and label18. */
2325 /* Grab the instruction. */
2346 }
2348 static bfd_reloc_status_type
2356 bfd_vma value;
2357 {
2358 bfd_vma insn;
2359 bfd_vma gp;
2381 }
2383 static bfd_reloc_status_type
2391 bfd_vma value;
2392 {
2393 bfd_vma insn;
2394 bfd_vma gp;
2417 }
2422 bfd_reloc_code_real_type code;
2423 {
2425 {
2436 /* Fall through. */
2574 }
2577 }
2581 {
2586 i++)
2597 }
2599 /* Set the howto pointer for an FRV ELF reloc. */
2601 static void
2606 {
2611 {
2623 }
2624 }
2626 /* Set the howto pointer for an FRV ELF REL reloc. */
2627 static void
2630 {
2635 {
2659 }
2660 }
2661 \f
2662 /* Perform a single relocation. By default we use the standard BFD
2663 routines, but a few relocs, we have to do them ourselves. */
2665 static bfd_reloc_status_type
2667 relocation)
2673 bfd_vma relocation;
2674 {
2678 }
2680 \f
2681 /* Relocate an FRV ELF section.
2683 The RELOCATE_SECTION function is called by the new ELF backend linker
2684 to handle the relocations for a section.
2686 The relocs are always passed as Rela structures; if the section
2687 actually uses Rel structures, the r_addend field will always be
2688 zero.
2690 This function is responsible for adjusting the section contents as
2691 necessary, and (if using Rela relocs and generating a relocatable
2692 output file) adjusting the reloc addend as necessary.
2694 This function does not have to worry about setting the reloc
2695 address or the reloc symbol index.
2697 LOCAL_SYMS is a pointer to the swapped in local symbols.
2699 LOCAL_SECTIONS is an array giving the section in the input file
2700 corresponding to the st_shndx field of each local symbol.
2702 The global hash table entry for the global symbols can be found
2703 via elf_sym_hashes (input_bfd).
2705 When generating relocatable output, this function must handle
2706 STB_LOCAL/STT_SECTION symbols specially. The output symbol is
2707 going to be the section symbol corresponding to the output
2708 section, which means that the addend must be adjusted
2709 accordingly. */
2711 static bfd_boolean
2722 {
2742 else
2748 else
2754 else
2759 else
2763 {
2769 bfd_vma relocation;
2770 bfd_reloc_status_type r;
2790 {
2795 name = bfd_elf_string_from_elf_section
2798 }
2799 else
2800 {
2801 bfd_boolean warned;
2802 bfd_boolean unresolved_reloc;
2809 }
2812 {
2813 /* For relocs against symbols from removed linkonce sections,
2814 or sections discarded by a linker script, we just want the
2815 section contents zeroed. Avoid any special processing. */
2820 }
2830 {
2833 }
2836 {
2876 else
2877 /* In order to find the entry we created before, we must
2878 use the original addend, not the one that may have been
2879 modified by _bfd_elf_rela_local_sym(). */
2889 {
2894 }
2899 non_fdpic:
2902 {
2907 }
2909 }
2912 {
2935 }
2937 /* Try to apply TLS relaxations. */
2940 {
2942 #define LOCAL_EXEC_P(info, picrel) \
2943 ((info)->executable \
2944 && (picrel->symndx != -1 || FRVFDPIC_SYM_LOCAL ((info), (picrel)->d.h)))
2945 #define INITIAL_EXEC_P(info, picrel) \
2946 (((info)->executable || (info)->flags & DF_STATIC_TLS) \
2947 && (picrel)->tlsoff_entry)
2949 #define IN_RANGE_FOR_OFST12_P(value) \
2950 ((bfd_vma)((value) + 2048) < (bfd_vma)4096)
2951 #define IN_RANGE_FOR_SETLOS_P(value) \
2952 ((bfd_vma)((value) + 32768) < (bfd_vma)65536)
2953 #define TLSMOFF_IN_RANGE_FOR_SETLOS_P(value, info) \
2954 (IN_RANGE_FOR_SETLOS_P ((value) - tls_biased_base (info)))
2956 #define RELAX_GETTLSOFF_LOCAL_EXEC_P(info, picrel, value) \
2957 (LOCAL_EXEC_P ((info), (picrel)) \
2958 && TLSMOFF_IN_RANGE_FOR_SETLOS_P((value), (info)))
2959 #define RELAX_GETTLSOFF_INITIAL_EXEC_P(info, picrel) \
2960 (INITIAL_EXEC_P ((info), (picrel)) \
2961 && IN_RANGE_FOR_OFST12_P ((picrel)->tlsoff_entry))
2963 #define RELAX_TLSDESC_LOCAL_EXEC_P(info, picrel, value) \
2964 (LOCAL_EXEC_P ((info), (picrel)))
2965 #define RELAX_TLSDESC_INITIAL_EXEC_P(info, picrel) \
2966 (INITIAL_EXEC_P ((info), (picrel)))
2968 #define RELAX_GOTTLSOFF_LOCAL_EXEC_P(info, picrel, value) \
2969 (LOCAL_EXEC_P ((info), (picrel)) \
2970 && TLSMOFF_IN_RANGE_FOR_SETLOS_P((value), (info)))
2975 /* Is this a call instruction? */
2977 {
2983 }
2987 {
2988 /* Replace the call instruction (except the packing bit)
2989 with setlos #tlsmofflo(symbol+offset), gr9. */
2997 }
3000 {
3001 /* Replace the call instruction (except the packing bit)
3002 with ldi @(gr15, #gottlsoff12(symbol+addend)), gr9. */
3010 }
3017 /* Is this an lddi instruction? */
3019 {
3025 }
3030 info))
3031 {
3032 /* Replace lddi @(grB, #gottlsdesc12(symbol+offset), grC
3033 with setlos #tlsmofflo(symbol+offset), gr<C+1>.
3034 Preserve the packing bit. */
3044 }
3048 {
3049 /* Replace lddi @(grB, #gottlsdesc12(symbol+offset), grC
3050 with sethi #tlsmoffhi(symbol+offset), gr<C+1>.
3051 Preserve the packing bit. */
3061 }
3064 {
3065 /* Replace lddi @(grB, #gottlsdesc12(symbol+offset), grC
3066 with ldi @(grB, #gottlsoff12(symbol+offset),
3067 gr<C+1>. Preserve the packing bit. If gottlsoff12
3068 overflows, we'll error out, but that's sort-of ok,
3069 since we'd started with gottlsdesc12, that's actually
3070 more demanding. Compiling with -fPIE instead of
3071 -fpie would fix it; linking with --relax should fix
3072 it as well. */
3081 }
3088 /* Is this a sethi instruction? */
3090 {
3096 }
3102 {
3103 /* Replace sethi with a nop. Preserve the packing bit. */
3108 /* Nothing to relocate. */
3110 }
3113 {
3114 /* Simply decay GOTTLSDESC to GOTTLSOFF. */
3118 }
3125 /* Is this a setlo or setlos instruction? */
3127 {
3134 }
3140 {
3141 /* Replace setlo/setlos with a nop. Preserve the
3142 packing bit. */
3147 /* Nothing to relocate. */
3149 }
3152 {
3153 /* If the corresponding sethi (if it exists) decayed
3154 to a nop, make sure this becomes (or already is) a
3155 setlos, not setlo. */
3157 {
3160 }
3162 /* Simply decay GOTTLSDESC to GOTTLSOFF. */
3166 }
3173 /* Is this an ldd instruction? */
3175 {
3181 }
3186 info))
3187 {
3188 /* Replace ldd #tlsdesc(symbol+offset)@(grB, grA), grC
3189 with setlos #tlsmofflo(symbol+offset), gr<C+1>.
3190 Preserve the packing bit. */
3200 }
3204 {
3205 /* Replace ldd #tlsdesc(symbol+offset)@(grB, grA), grC
3206 with sethi #tlsmoffhi(symbol+offset), gr<C+1>.
3207 Preserve the packing bit. */
3217 }
3221 {
3222 /* Replace ldd #tlsdesc(symbol+offset)@(grB, grA), grC
3223 with ldi @(grB, #gottlsoff12(symbol+offset), gr<C+1>.
3224 Preserve the packing bit. */
3234 }
3237 {
3238 /* Replace ldd #tlsdesc(symbol+offset)@(grB, grA), grC
3239 with ld #tlsoff(symbol+offset)@(grB, grA), gr<C+1>.
3240 Preserve the packing bit. */
3246 /* #tlsoff(symbol+offset) is just a relaxation
3247 annotation, so there's nothing left to
3248 relocate. */
3250 }
3257 /* Is this a calll or callil instruction? */
3259 {
3266 }
3271 info))
3272 {
3273 /* Replace calll with a nop. Preserve the packing bit. */
3278 /* Nothing to relocate. */
3280 }
3284 {
3285 /* Replace calll with setlo #tlsmofflo(symbol+offset), gr9.
3286 Preserve the packing bit. */
3294 }
3297 {
3298 /* Replace calll with a nop. Preserve the packing bit. */
3303 /* Nothing to relocate. */
3305 }
3312 /* Is this an ldi instruction? */
3314 {
3320 }
3324 {
3325 /* Replace ldi @(grB, #gottlsoff12(symbol+offset), grC
3326 with setlos #tlsmofflo(symbol+offset), grC.
3327 Preserve the packing bit. */
3335 }
3342 /* Is this a sethi instruction? */
3344 {
3350 }
3356 {
3357 /* Replace sethi with a nop. Preserve the packing bit. */
3362 /* Nothing to relocate. */
3364 }
3371 /* Is this a setlo or setlos instruction? */
3373 {
3380 }
3386 {
3387 /* Replace setlo/setlos with a nop. Preserve the
3388 packing bit. */
3393 /* Nothing to relocate. */
3395 }
3402 /* Is this an ld instruction? */
3404 {
3410 }
3414 {
3415 /* Replace ld #gottlsoff(symbol+offset)@(grB, grA), grC
3416 with setlos #tlsmofflo(symbol+offset), grC.
3417 Preserve the packing bit. */
3425 }
3429 {
3430 /* Replace ld #tlsoff(symbol+offset)@(grB, grA), grC
3431 with ldi @(grB, #gottlsoff12(symbol+offset), grC.
3432 Preserve the packing bit. */
3440 }
3447 /* Is this a sethi instruction? */
3449 {
3455 }
3458 info))
3459 {
3460 /* Replace sethi with a nop. Preserve the packing bit. */
3465 /* Nothing to relocate. */
3467 }
3474 /* Is this a setlo or setlos instruction? */
3476 {
3483 }
3486 info))
3487 /* If the corresponding sethi (if it exists) decayed
3488 to a nop, make sure this becomes (or already is) a
3489 setlos, not setlo. */
3490 {
3493 }
3497 /*
3498 There's nothing to relax in these:
3499 R_FRV_TLSDESC_VALUE
3500 R_FRV_TLSOFF
3501 R_FRV_TLSMOFF12
3502 R_FRV_TLSMOFFHI
3503 R_FRV_TLSMOFFLO
3504 R_FRV_TLSMOFF
3505 */
3509 }
3512 {
3518 {
3523 }
3524 /* We don't want to warn on calls to undefined weak symbols,
3525 as calls to them must be protected by non-NULL tests
3526 anyway, and unprotected calls would invoke undefined
3527 behavior. */
3531 else
3571 {
3577 {
3578 /* If the symbol is dynamic and there may be dynamic
3579 symbol resolution because we are or are linked with a
3580 shared library, emit a FUNCDESC relocation such that
3581 the dynamic linker will allocate the function
3582 descriptor. If the symbol needs a non-local function
3583 descriptor but binds locally (e.g., its visibility is
3584 protected, emit a dynamic relocation decayed to
3585 section+offset. */
3589 {
3594 }
3596 {
3598 {
3603 }
3605 }
3606 else
3607 {
3608 /* Otherwise, we know we have a private function
3609 descriptor, so reference it directly. */
3617 }
3619 /* If there is room for dynamic symbol resolution, emit
3620 the dynamic relocation. However, if we're linking an
3621 executable at a fixed location, we won't have emitted a
3622 dynamic symbol entry for the got section, so idx will
3623 be zero, which means we can and should compute the
3624 address of the private descriptor ourselves. */
3627 {
3632 {
3633 bfd_vma offset;
3636 input_section
3638 {
3644 }
3646 offset = _bfd_elf_section_offset
3652 frvfdpic_gotfixup_section
3654 offset + input_section
3657 picrel);
3658 }
3659 }
3663 {
3664 bfd_vma offset;
3667 input_section
3669 {
3675 }
3677 offset = _bfd_elf_section_offset
3684 offset + input_section
3688 }
3689 else
3691 }
3693 /* We want the addend in-place because dynamic
3694 relocations are REL. Setting relocation to it should
3695 arrange for it to be installed. */
3697 }
3703 {
3706 }
3707 /* Fall through. */
3709 {
3713 /* If the symbol is dynamic but binds locally, use
3714 section+offset. */
3716 {
3718 {
3723 }
3725 }
3726 else
3727 {
3730 else
3738 else
3740 }
3742 /* If we're linking an executable at a fixed address, we
3743 can omit the dynamic relocation as long as the symbol
3744 is defined in the current link unit (which is implied
3745 by its output section not being NULL). */
3748 {
3755 {
3757 input_section
3759 {
3765 }
3767 {
3768 bfd_vma offset = _bfd_elf_section_offset
3773 {
3775 frvfdpic_gotfixup_section
3777 offset + input_section
3780 picrel);
3782 _frvfdpic_add_rofixup
3785 offset
3788 }
3789 }
3790 }
3791 }
3792 else
3793 {
3797 {
3798 bfd_vma offset;
3801 input_section
3803 {
3809 }
3811 offset = _bfd_elf_section_offset
3818 offset + input_section
3822 }
3825 /* We want the addend in-place because dynamic
3826 relocations are REL. Setting relocation to it
3827 should arrange for it to be installed. */
3829 }
3832 {
3833 /* If we've omitted the dynamic relocation, just emit
3834 the fixed addresses of the symbol and of the local
3835 GOT base offset. */
3843 else
3844 /* A function descriptor used for lazy or local
3845 resolving is initialized such that its high word
3846 contains the output section index in which the
3847 PLT entries are located, and the low word
3848 contains the offset of the lazy PLT entry entry
3849 point into that section. */
3854 sec
3857 }
3858 }
3905 {
3908 }
3910 {
3914 }
3915 else
3934 /* These shouldn't be present in input object files. */
3941 /* These are just annotations for relaxation, nothing to do
3942 here. */
3951 }
3954 {
3955 /* If you take this out, remove the #error from fdpic-static-6.d
3956 in the ld testsuite. */
3957 /* This helps catch problems in GCC while we can't do more
3958 than static linking. The idea is to test whether the
3959 input file basename is crt0.o only once. */
3961 silence_segment_error =
3970 /* We don't want duplicate errors for undefined
3971 symbols. */
3974 {
3980 else
3985 }
3989 }
3992 {
3995 /* We need the addend to be applied before we shift the
3996 value right. */
3998 /* Fall through. */
4005 /* Fall through. */
4019 }
4022 {
4026 /* Fall through. */
4028 /* When referencing a GOT entry, a function descriptor or a
4029 PLT, we don't want the addend to apply to the reference,
4030 but rather to the referenced symbol. The actual entry
4031 will have already been created taking the addend into
4032 account, so cancel it out here. */
4049 /* Note that we only want GOTOFFHI, not GOTOFFLO or GOTOFF12
4050 here, since we do want to apply the addend to the others.
4051 Note that we've applied the addend to GOTOFFHI before we
4052 shifted it right. */
4060 }
4092 else
4097 {
4101 {
4128 }
4131 {
4136 }
4140 }
4141 }
4144 }
4145 \f
4146 /* Return the section that should be marked against GC for a given
4147 relocation. */
4155 {
4158 {
4162 }
4165 }
4166 \f
4167 /* Hook called by the linker routine which adds symbols from an object
4168 file. We use it to put .comm items in .scomm, and not .comm. */
4170 static bfd_boolean
4179 {
4183 {
4184 /* Common symbols less than or equal to -G nn bytes are
4185 automatically put into .sbss. */
4190 {
4192 (SEC_ALLOC
4193 | SEC_IS_COMMON
4197 }
4201 }
4204 }
4206 /* We need dynamic symbols for every section, since segments can
4207 relocate independently. */
4208 static bfd_boolean
4211 ATTRIBUTE_UNUSED,
4213 {
4215 {
4218 /* If sh_type is yet undecided, assume it could be
4219 SHT_PROGBITS/SHT_NOBITS. */
4223 /* There shouldn't be section relative relocations
4224 against any other section. */
4227 }
4228 }
4230 /* Create a .got section, as well as its additional info field. This
4231 is almost entirely copied from
4232 elflink.c:_bfd_elf_create_got_section(). */
4234 static bfd_boolean
4236 {
4245 /* This function may be called more than once. */
4250 /* Machine specific: although pointers are 32-bits wide, we want the
4251 GOT to be aligned to a 64-bit boundary, such that function
4252 descriptors in it can be accessed with 64-bit loads and
4253 stores. */
4266 {
4271 }
4274 {
4275 /* Define the symbol _GLOBAL_OFFSET_TABLE_ at the start of the .got
4276 (or .got.plt) section. We don't do this in the linker script
4277 because we don't want to define the symbol if we are not creating
4278 a global offset table. */
4284 /* Machine-specific: we want the symbol for executables as
4285 well. */
4288 }
4290 /* The first bit of the global offset table is the header. */
4293 /* This is the machine-specific part. Create and initialize section
4294 data for the got. */
4296 {
4299 frvfdpic_relocs_info_hash,
4300 frvfdpic_relocs_info_eq,
4313 /* Machine-specific. */
4323 }
4324 else
4325 {
4328 }
4330 /* Define _gp in .rofixup, for FDPIC, or .got otherwise. If it
4331 turns out that we're linking with a different linker script, the
4332 linker script will override it. */
4343 /* Machine-specific: we want the symbol for executables as well. */
4350 /* FDPIC supports Thread Local Storage, and this may require a
4351 procedure linkage table for TLS PLT entries. */
4353 /* This is mostly copied from
4354 elflink.c:_bfd_elf_create_dynamic_sections(). */
4367 /* FRV-specific: remember it. */
4370 /* Define the symbol _PROCEDURE_LINKAGE_TABLE_ at the start of the
4371 .plt section. */
4373 {
4379 }
4381 /* FRV-specific: we want rel relocations for the plt. */
4387 /* FRV-specific: remember it. */
4391 }
4393 /* Make sure the got and plt sections exist, and that our pointers in
4394 the link hash table point to them. */
4396 static bfd_boolean
4398 {
4399 /* This is mostly copied from
4400 elflink.c:_bfd_elf_create_dynamic_sections(). */
4401 flagword flags;
4408 /* We need to create .plt, .rel[a].plt, .got, .got.plt, .dynbss, and
4409 .rel[a].bss sections. */
4411 /* FRV-specific: we want to create the GOT and the PLT in the FRV
4412 way. */
4416 /* FRV-specific: make sure we created everything we wanted. */
4423 {
4424 /* The .dynbss section is a place to put symbols which are defined
4425 by dynamic objects, are referenced by regular objects, and are
4426 not functions. We must allocate space for them in the process
4427 image and use a R_*_COPY reloc to tell the dynamic linker to
4428 initialize them at run time. The linker script puts the .dynbss
4429 section into the .bss section of the final image. */
4435 /* The .rel[a].bss section holds copy relocs. This section is not
4436 normally needed. We need to create it here, though, so that the
4437 linker will map it to an output section. We can't just create it
4438 only if we need it, because we will not know whether we need it
4439 until we have seen all the input files, and the first time the
4440 main linker code calls BFD after examining all the input files
4441 (size_dynamic_sections) the input sections have already been
4442 mapped to the output sections. If the section turns out not to
4443 be needed, we can discard it later. We will never need this
4444 section when generating a shared object, since they do not use
4445 copy relocs. */
4447 {
4455 }
4456 }
4459 }
4461 /* Compute the total GOT and PLT size required by each symbol in each
4462 range. Symbols may require up to 4 words in the GOT: an entry
4463 pointing to the symbol, an entry pointing to its function
4464 descriptor, and a private function descriptors taking two
4465 words. */
4467 static void
4470 {
4471 /* Allocate space for a GOT entry pointing to the symbol. */
4478 else
4482 /* Allocate space for a GOT entry pointing to the function
4483 descriptor. */
4490 else
4494 /* Decide whether we need a PLT entry, a function descriptor in the
4495 GOT, and a lazy PLT entry for this symbol. */
4509 /* Allocate space for a function descriptor. */
4518 else
4524 }
4526 /* Compute the total GOT size required by each TLS symbol in each
4527 range. Symbols may require up to 5 words in the GOT: an entry
4528 holding the TLS offset for the symbol, and an entry with a full TLS
4529 descriptor taking 4 words. */
4531 static void
4534 bfd_boolean subtract)
4535 {
4538 /* Allocate space for a GOT entry with the TLS offset of the
4539 symbol. */
4546 else
4550 /* If there's any TLSOFF relocation, mark the output file as not
4551 suitable for dlopening. This mark will remain even if we relax
4552 all such relocations, but this is not a problem, since we'll only
4553 do so for executables, and we definitely don't want anyone
4554 dlopening executables. */
4558 /* Allocate space for a TLS descriptor. */
4567 else
4570 }
4572 /* Compute the number of dynamic relocations and fixups that a symbol
4573 requires, and add (or subtract) from the grand and per-symbol
4574 totals. */
4576 static void
4579 bfd_boolean subtract)
4580 {
4584 {
4588 /* In the executable, TLS relocations to symbols that bind
4589 locally (including those that resolve to global TLS offsets)
4590 are resolved immediately, without any need for fixups or
4591 dynamic relocations. In shared libraries, however, we must
4592 emit dynamic relocations even for local symbols, because we
4593 don't know the module id the library is going to get at
4594 run-time, nor its TLS base offset. */
4599 }
4600 else
4601 {
4603 {
4609 }
4610 else
4611 {
4614 }
4618 {
4622 }
4623 else
4625 }
4628 {
4632 }
4639 }
4641 /* Look for opportunities to relax TLS relocations. We can assume
4642 we're linking the main executable or a static-tls library, since
4643 otherwise we wouldn't have got here. When relaxing, we have to
4644 first undo any previous accounting of TLS uses of fixups, dynamic
4645 relocations, GOT and PLT entries. */
4647 static void
4650 bfd_boolean relaxing)
4651 {
4658 {
4660 {
4664 }
4666 /* When linking an executable, we can always decay GOTTLSDESC to
4667 TLSMOFF, if the symbol is local, or GOTTLSOFF, otherwise.
4668 When linking a static-tls shared library, using TLSMOFF is
4669 not an option, but we can still use GOTTLSOFF. When decaying
4670 to GOTTLSOFF, we must keep the GOT entry in range. We know
4671 it has to fit because we'll be trading the 4 words of hte TLS
4672 descriptor for a single word in the same range. */
4676 {
4680 }
4683 }
4685 /* We can only decay TLSOFFs or call #gettlsoff to TLSMOFF in the
4686 main executable. We have to check whether the symbol's TLSOFF is
4687 in range for a setlos. For symbols with a hash entry, we can
4688 determine exactly what to do; for others locals, we don't have
4689 addresses handy, so we use the size of the TLS section as an
4690 approximation. If we get it wrong, we'll retain a GOT entry
4691 holding the TLS offset (without dynamic relocations or fixups),
4692 but we'll still optimize away the loads from it. Since TLS sizes
4693 are generally very small, it's probably not worth attempting to
4694 do better than this. */
4700 /* The above may hold for an undefweak TLS symbol, so make
4701 sure we don't have this case before accessing def.value
4702 and def.section. */
4714 {
4716 {
4720 }
4724 }
4726 /* We can decay `call #gettlsoff' to a ldi #tlsoff if we already
4727 have a #gottlsoff12 relocation for this entry, or if we can fit
4728 one more in the 12-bit (and 16-bit) ranges. */
4731 || (relaxing
4736 {
4738 {
4742 }
4746 }
4749 {
4752 }
4755 }
4757 /* Compute the total GOT and PLT size required by each symbol in each range. *
4758 Symbols may require up to 4 words in the GOT: an entry pointing to
4759 the symbol, an entry pointing to its function descriptor, and a
4760 private function descriptors taking two words. */
4762 static int
4764 {
4772 else
4773 {
4776 }
4779 }
4781 /* Determine the positive and negative ranges to be used by each
4782 offset range in the GOT. FDCUR and CUR, that must be aligned to a
4783 double-word boundary, are the minimum (negative) and maximum
4784 (positive) GOT offsets already used by previous ranges, except for
4785 an ODD entry that may have been left behind. GOT and FD indicate
4786 the size of GOT entries and function descriptors that must be
4787 placed within the range from -WRAP to WRAP. If there's room left,
4788 up to FDPLT bytes should be reserved for additional function
4789 descriptors. */
4793 bfd_signed_vma fdcur,
4794 bfd_signed_vma odd,
4795 bfd_signed_vma cur,
4796 bfd_vma got,
4797 bfd_vma fd,
4798 bfd_vma fdplt,
4799 bfd_vma tlsd,
4800 bfd_vma tlsdplt,
4801 bfd_vma wrap)
4802 {
4806 /* Start at the given initial points. */
4810 /* If we had an incoming odd word and we have any got entries that
4811 are going to use it, consume it, otherwise leave gad->odd at
4812 zero. We might force gad->odd to zero and return the incoming
4813 odd such that it is used by the next range, but then GOT entries
4814 might appear to be out of order and we wouldn't be able to
4815 shorten the GOT by one word if it turns out to end with an
4816 unpaired GOT entry. */
4818 {
4822 }
4823 else
4826 /* If we're left with an unpaired GOT entry, compute its location
4827 such that we can return it. Otherwise, if got doesn't require an
4828 odd number of words here, either odd was already zero in the
4829 block above, or it was set to zero because got was non-zero, or
4830 got was already zero. In the latter case, we want the value of
4831 odd to carry over to the return statement, so we don't want to
4832 reset odd unless the condition below is true. */
4834 {
4837 }
4839 /* Compute the tentative boundaries of this range. */
4844 /* If function descriptors took too much space, wrap some of them
4845 around. */
4847 {
4850 }
4852 /* If GOT entries took too much space, wrap some of them around.
4853 This may well cause gad->min to become lower than wrapmin. This
4854 will cause a relocation overflow later on, so we don't have to
4855 report it here . */
4857 {
4860 }
4862 /* Add TLS descriptors. */
4867 /* If TLS descriptors took too much space, wrap an integral number
4868 of them around. */
4870 {
4878 }
4880 /* If there is space left and we have function descriptors
4881 referenced in PLT entries that could take advantage of shorter
4882 offsets, place them now. */
4884 {
4885 bfd_vma fds;
4889 else
4896 }
4898 /* If there is more space left, try to place some more function
4899 descriptors for PLT entries. */
4901 {
4902 bfd_vma fds;
4906 else
4913 }
4915 /* If there is space left and we have TLS descriptors referenced in
4916 PLT entries that could take advantage of shorter offsets, place
4917 them now. */
4919 {
4920 bfd_vma tlsds;
4924 else
4930 }
4932 /* If there is more space left, try to place some more TLS
4933 descriptors for PLT entries. Although we could try to fit an
4934 additional TLS descriptor with half of it just before before the
4935 wrap point and another right past the wrap point, this might
4936 cause us to run out of space for the next region, so don't do
4937 it. */
4939 {
4940 bfd_vma tlsds;
4944 else
4950 }
4952 /* If odd was initially computed as an offset past the wrap point,
4953 wrap it around. */
4957 /* _frvfdpic_get_got_entry() below will always wrap gad->cur if needed
4958 before returning, so do it here too. This guarantees that,
4959 should cur and fdcur meet at the wrap point, they'll both be
4960 equal to min. */
4964 /* Ditto for _frvfdpic_get_tlsdesc_entry(). */
4970 }
4972 /* Compute the location of the next GOT entry, given the allocation
4973 data for a range. */
4977 {
4978 bfd_signed_vma ret;
4981 {
4982 /* If there was an odd word left behind, use it. */
4985 }
4986 else
4987 {
4988 /* Otherwise, use the word pointed to by cur, reserve the next
4989 as an odd word, and skip to the next pair of words, possibly
4990 wrapping around. */
4996 }
4999 }
5001 /* Compute the location of the next function descriptor entry in the
5002 GOT, given the allocation data for a range. */
5006 {
5007 /* If we're at the bottom, wrap around, and only then allocate the
5008 next pair of words. */
5012 }
5014 /* Compute the location of the next TLS descriptor entry in the GOT,
5015 given the allocation data for a range. */
5018 {
5019 bfd_signed_vma ret;
5025 /* If we're at the top of the region, wrap around to the bottom. */
5030 }
5032 /* Assign GOT offsets for every GOT entry and function descriptor.
5033 Doing everything in a single pass is tricky. */
5035 static int
5037 {
5058 {
5061 }
5065 {
5068 }
5070 {
5073 }
5087 {
5090 }
5094 {
5097 }
5099 {
5102 }
5107 }
5109 /* Assign GOT offsets to private function descriptors used by PLT
5110 entries (or referenced by 32-bit offsets), as well as PLT entries
5111 and lazy PLT entries. */
5113 static int
5115 {
5123 {
5126 /* We use the section's raw size to mark the location of the
5127 next PLT entry. */
5130 /* Figure out the length of this PLT entry based on the
5131 addressing mode we need to reach the function descriptor. */
5139 else
5143 }
5146 {
5149 /* If this entry is the one that gets the resolver stub, account
5150 for the additional instruction. */
5154 }
5157 {
5160 entry->tlsplt_entry
5166 {
5168 /* FIXME: here we use the size of the TLS section
5169 as an upper bound for the value of the TLS
5170 symbol, because we may not know the exact value
5171 yet. If we get it wrong, we'll just waste a
5172 word in the PLT, and we should never get even
5173 close to 32 KiB of TLS anyway. */
5178 else
5180 }
5182 {
5189 else
5191 }
5192 else
5193 {
5202 else
5204 }
5207 }
5210 }
5212 /* Cancel out any effects of calling _frvfdpic_assign_got_entries and
5213 _frvfdpic_assign_plt_entries. */
5215 static int
5217 {
5230 }
5232 /* Follow indirect and warning hash entries so that each got entry
5233 points to the final symbol definition. P must point to a pointer
5234 to the hash table we're traversing. Since this traversal may
5235 modify the hash table, we set this pointer to NULL to indicate
5236 we've made a potentially-destructive change to the hash table, so
5237 the traversal must be restarted. */
5238 static int
5240 {
5245 {
5257 NO_INSERT);
5260 {
5261 /* Merge the two entries. */
5265 }
5269 /* If we can't find this entry with the new bfd hash, re-insert
5270 it, and get the traversal restarted. */
5272 {
5277 /* Abort the traversal, since the whole table may have
5278 moved, and leave it up to the parent to restart the
5279 process. */
5282 }
5283 }
5286 }
5288 /* Compute the total size of the GOT, the PLT, the dynamic relocations
5289 section and the rofixup section. Assign locations for GOT and PLT
5290 entries. */
5292 static bfd_boolean
5295 {
5296 bfd_signed_vma odd;
5305 /* Compute the total size taken by entries in the 12-bit and 16-bit
5306 ranges, to tell how many PLT function descriptors we can bring
5307 into the 12-bit range without causing the 16-bit range to
5308 overflow. */
5314 else
5317 {
5320 }
5321 else
5326 /* Determine the ranges of GOT offsets that we can use for each
5327 range of addressing modes. */
5330 odd,
5334 limit,
5336 tlslimit,
5340 odd,
5352 odd,
5365 /* Now assign (most) GOT offsets. */
5367 gpinfop);
5371 /* If an odd word is the last word of the GOT, we don't need this
5372 word to be part of the GOT. */
5378 {
5381 }
5382 /* This will be non-NULL during relaxation. The assumption is that
5383 the size of one of these sections will never grow, only shrink,
5384 so we can use the larger buffer we allocated before. */
5386 {
5392 }
5395 /* Subtract the number of lzplt entries, since those will generate
5396 relocations in the pltrel section. */
5400 else
5405 {
5411 }
5417 {
5423 }
5426 {
5433 {
5439 }
5440 }
5442 /* Add 4 bytes for every block of at most 65535 lazy PLT entries,
5443 such that there's room for the additional instruction needed to
5444 call the resolver. Since _frvfdpic_assign_got_entries didn't
5445 account for them, our block size is 4 bytes smaller than the real
5446 block size. */
5448 {
5452 }
5454 /* Reset it, such that _frvfdpic_assign_plt_entries() can use it to
5455 actually assign lazy PLT entries addresses. */
5458 /* Save information that we're going to need to generate GOT and PLT
5459 entries. */
5470 /* Allocate a ret statement at plt_initial_offset, to be used by
5471 locally-resolved TLS descriptors. */
5476 gpinfop);
5478 /* Allocate the PLT section contents only after
5479 _frvfdpic_assign_plt_entries has a chance to add the size of the
5480 non-lazy PLT entries. */
5482 {
5486 {
5492 }
5493 }
5496 }
5498 /* Set the sizes of the dynamic sections. */
5500 static bfd_boolean
5503 {
5512 {
5513 /* Set the contents of the .interp section to the interpreter. */
5515 {
5520 }
5521 }
5527 {
5534 }
5539 /* Allocate space to save the summary information, we're going to
5540 use it if we're doing relaxations. */
5547 {
5564 }
5567 }
5569 static bfd_boolean
5572 {
5574 {
5577 /* Force a PT_GNU_STACK segment to be created. */
5581 /* Define __stacksize if it's not defined yet. */
5587 {
5600 /* This one must NOT be hidden. */
5601 }
5602 }
5605 }
5607 /* Check whether any of the relocations was optimized away, and
5608 subtract it from the relocation or fixup count. */
5609 static bfd_boolean
5614 {
5628 /* Now examine each relocation. */
5630 {
5648 else
5649 {
5654 }
5660 else
5677 }
5680 }
5682 static bfd_boolean
5686 {
5691 /* Account for relaxation of .eh_frame section. */
5694 {
5698 }
5701 {
5708 /* Clear GOT and PLT assignments. */
5710 _frvfdpic_reset_got_plt_entries,
5711 NULL);
5715 }
5718 }
5720 /* Look for opportunities to relax TLS relocations. We can assume
5721 we're linking the main executable or a static-tls library, since
5722 otherwise we wouldn't have got here. */
5724 static int
5726 {
5733 }
5735 static bfd_boolean
5738 {
5745 /* If we return early, we didn't change anything. */
5748 /* We'll do our thing when requested to relax the GOT section. */
5752 /* We can only relax when linking the main executable or a library
5753 that can't be dlopened. */
5757 /* If there isn't a TLS section for this binary, we can't do
5758 anything about its TLS relocations (it probably doesn't have
5759 any. */
5766 /* Now look for opportunities to relax, adjusting the GOT usage
5767 as needed. */
5769 _frvfdpic_relax_got_plt_entries,
5772 /* If we changed anything, reset and re-assign GOT and PLT entries. */
5775 {
5776 /* Clear GOT and PLT assignments. */
5778 _frvfdpic_reset_got_plt_entries,
5779 NULL);
5781 /* The owner of the TLS section is the output bfd. There should
5782 be a better way to get to it. */
5787 /* Repeat until we don't make any further changes. We could fail to
5788 introduce changes in a round if, for example, the 12-bit range is
5789 full, but we later release some space by getting rid of TLS
5790 descriptors in it. We have to repeat the whole process because
5791 we might have changed the size of a section processed before this
5792 one. */
5794 }
5797 }
5799 static bfd_boolean
5802 {
5807 /* objcopy and strip preserve what's already there using
5808 elf32_frvfdpic_copy_private_bfd_data (). */
5817 {
5820 /* Obtain the pointer to the __stacksize symbol. */
5824 {
5829 }
5831 /* Set the header p_memsz from the symbol value. We
5832 intentionally ignore the symbol section. */
5835 else
5839 }
5842 }
5844 /* Fill in code and data in dynamic sections. */
5846 static bfd_boolean
5849 {
5850 /* Nothing to be done for non-FDPIC. */
5852 }
5854 static bfd_boolean
5857 {
5864 {
5866 }
5868 {
5874 {
5886 {
5887 error:
5891 }
5898 {
5899 bfd_vma value =
5908 }
5909 }
5910 }
5912 {
5916 }
5920 {
5932 {
5933 Elf_Internal_Dyn dyn;
5938 {
5960 }
5961 }
5962 }
5965 }
5967 /* Adjust a symbol defined by a dynamic object and referenced by a
5968 regular object. */
5970 static bfd_boolean
5971 elf32_frvfdpic_adjust_dynamic_symbol
5974 {
5979 /* Make sure we know what is going on here. */
5986 /* If this is a weak symbol, and there is a real definition, the
5987 processor independent code will have arranged for us to see the
5988 real definition first, and we can just use the same value. */
5990 {
5995 }
5998 }
6000 /* Perform any actions needed for dynamic symbols. */
6002 static bfd_boolean
6003 elf32_frvfdpic_finish_dynamic_symbol
6008 {
6010 }
6012 /* Decide whether to attempt to turn absptr or lsda encodings in
6013 shared libraries into pcrel within the given input section. */
6015 static bfd_boolean
6016 frvfdpic_elf_use_relative_eh_frame
6020 {
6021 /* We can't use PC-relative encodings in FDPIC binaries, in general. */
6023 }
6025 /* Adjust the contents of an eh_frame_hdr section before they're output. */
6027 static bfd_byte
6033 {
6045 == (_frvfdpic_osec_to_segment
6054 }
6056 /* Look through the relocs for a section during the first phase.
6058 Besides handling virtual table relocs for gc, we have to deal with
6059 all sorts of PIC-related relocations. We describe below the
6060 general plan on how to handle such relocations, even though we only
6061 collect information at this point, storing them in hash tables for
6062 perusal of later passes.
6064 32 relocations are propagated to the linker output when creating
6065 position-independent output. LO16 and HI16 relocations are not
6066 supposed to be encountered in this case.
6068 LABEL16 should always be resolvable by the linker, since it's only
6069 used by branches.
6071 LABEL24, on the other hand, is used by calls. If it turns out that
6072 the target of a call is a dynamic symbol, a PLT entry must be
6073 created for it, which triggers the creation of a private function
6074 descriptor and, unless lazy binding is disabled, a lazy PLT entry.
6076 GPREL relocations require the referenced symbol to be in the same
6077 segment as _gp, but this can only be checked later.
6079 All GOT, GOTOFF and FUNCDESC relocations require a .got section to
6080 exist. LABEL24 might as well, since it may require a PLT entry,
6081 that will require a got.
6083 Non-FUNCDESC GOT relocations require a GOT entry to be created
6084 regardless of whether the symbol is dynamic. However, since a
6085 global symbol that turns out to not be exported may have the same
6086 address of a non-dynamic symbol, we don't assign GOT entries at
6087 this point, such that we can share them in this case. A relocation
6088 for the GOT entry always has to be created, be it to offset a
6089 private symbol by the section load address, be it to get the symbol
6090 resolved dynamically.
6092 FUNCDESC GOT relocations require a GOT entry to be created, and
6093 handled as if a FUNCDESC relocation was applied to the GOT entry in
6094 an object file.
6096 FUNCDESC relocations referencing a symbol that turns out to NOT be
6097 dynamic cause a private function descriptor to be created. The
6098 FUNCDESC relocation then decays to a 32 relocation that points at
6099 the private descriptor. If the symbol is dynamic, the FUNCDESC
6100 relocation is propagated to the linker output, such that the
6101 dynamic linker creates the canonical descriptor, pointing to the
6102 dynamically-resolved definition of the function.
6104 Non-FUNCDESC GOTOFF relocations must always refer to non-dynamic
6105 symbols that are assigned to the same segment as the GOT, but we
6106 can only check this later, after we know the complete set of
6107 symbols defined and/or exported.
6109 FUNCDESC GOTOFF relocations require a function descriptor to be
6110 created and, unless lazy binding is disabled or the symbol is not
6111 dynamic, a lazy PLT entry. Since we can't tell at this point
6112 whether a symbol is going to be dynamic, we have to decide later
6113 whether to create a lazy PLT entry or bind the descriptor directly
6114 to the private function.
6116 FUNCDESC_VALUE relocations are not supposed to be present in object
6117 files, but they may very well be simply propagated to the linker
6118 output, since they have no side effect.
6121 A function descriptor always requires a FUNCDESC_VALUE relocation.
6122 Whether it's in .plt.rel or not depends on whether lazy binding is
6123 enabled and on whether the referenced symbol is dynamic.
6125 The existence of a lazy PLT requires the resolverStub lazy PLT
6126 entry to be present.
6129 As for assignment of GOT, PLT and lazy PLT entries, and private
6130 descriptors, we might do them all sequentially, but we can do
6131 better than that. For example, we can place GOT entries and
6132 private function descriptors referenced using 12-bit operands
6133 closer to the PIC register value, such that these relocations don't
6134 overflow. Those that are only referenced with LO16 relocations
6135 could come next, but we may as well place PLT-required function
6136 descriptors in the 12-bit range to make them shorter. Symbols
6137 referenced with LO16/HI16 may come next, but we may place
6138 additional function descriptors in the 16-bit range if we can
6139 reliably tell that we've already placed entries that are ever
6140 referenced with only LO16. PLT entries are therefore generated as
6141 small as possible, while not introducing relocation overflows in
6142 GOT or FUNCDESC_GOTOFF relocations. Lazy PLT entries could be
6143 generated before or after PLT entries, but not intermingled with
6144 them, such that we can have more lazy PLT entries in range for a
6145 branch to the resolverStub. The resolverStub should be emitted at
6146 the most distant location from the first lazy PLT entry such that
6147 it's still in range for a branch, or closer, if there isn't a need
6148 for so many lazy PLT entries. Additional lazy PLT entries may be
6149 emitted after the resolverStub, as long as branches are still in
6150 range. If the branch goes out of range, longer lazy PLT entries
6151 are emitted.
6153 We could further optimize PLT and lazy PLT entries by giving them
6154 priority in assignment to closer-to-gr17 locations depending on the
6155 number of occurrences of references to them (assuming a function
6156 that's called more often is more important for performance, so its
6157 PLT entry should be faster), or taking hints from the compiler.
6158 Given infinite time and money... :-) */
6160 static bfd_boolean
6166 {
6183 {
6190 else
6191 {
6196 }
6199 {
6229 /* Fall through. */
6237 {
6241 }
6243 {
6246 }
6248 {
6251 {
6258 }
6259 picrel
6263 }
6264 else
6275 }
6278 {
6288 /* Fall through. */
6376 /* This relocation describes the C++ object vtable hierarchy.
6377 Reconstruct it for later use during GC. */
6383 /* This relocation describes which C++ vtable entries are actually
6384 used. Record for later use during GC. */
6406 bad_reloc:
6411 }
6412 }
6415 }
6417 \f
6418 /* Return the machine subcode from the ELF e_flags header. */
6420 static int
6423 {
6425 {
6435 }
6438 }
6440 /* Set the right machine number for a FRV ELF file. */
6442 static bfd_boolean
6445 {
6449 }
6450 \f
6451 /* Function to set the ELF flag bits. */
6453 static bfd_boolean
6456 flagword flags;
6457 {
6461 }
6463 /* Copy backend specific data from one object module to another. */
6465 static bfd_boolean
6469 {
6480 /* Copy object attributes. */
6484 }
6486 /* Return true if the architecture described by elf header flag
6487 EXTENSION is an extension of the architecture described by BASE. */
6489 static bfd_boolean
6491 {
6495 /* CPU_GENERIC code can be merged with code for a specific
6496 architecture, in which case the result is marked as being
6497 for the specific architecture. Everything is therefore
6498 an extension of CPU_GENERIC. */
6511 }
6513 static bfd_boolean
6515 {
6529 /* Copy the stack size. */
6532 {
6537 {
6540 /* Rewrite the phdrs, since we're only called after they
6541 were first written. */
6549 }
6552 }
6555 }
6557 /* Merge backend specific data from an object file to the output
6558 object file when linking. */
6560 static bfd_boolean
6564 {
6578 #ifdef DEBUG
6582 #endif
6585 {
6588 }
6591 ;
6594 {
6595 /* Warn if different # of gprs are used. Note, 0 means nothing is
6596 said about the size of gprs. */
6600 ;
6603 ;
6608 else
6609 {
6611 {
6615 }
6618 {
6622 }
6623 }
6625 /* Warn if different # of fprs are used. Note, 0 means nothing is
6626 said about the size of fprs. */
6630 ;
6633 ;
6638 else
6639 {
6641 {
6646 }
6649 {
6654 }
6655 }
6657 /* Warn if different dword support was used. Note, 0 means nothing is
6658 said about the dword support. */
6662 ;
6665 ;
6670 else
6671 {
6673 {
6677 }
6680 {
6684 }
6685 }
6687 /* Or in flags that accumulate (ie, if one module uses it, mark that the
6688 feature is used. */
6690 | EF_FRV_MEDIA
6691 | EF_FRV_MULADD
6694 /* If any module was compiled without -G0, clear the G0 bit. */
6698 /* If any module was compiled without -mnopack, clear the mnopack bit. */
6702 /* We don't have to do anything if the pic flags are the same, or the new
6703 module(s) were compiled with -mlibrary-pic. */
6707 ;
6709 /* If the old module(s) were compiled with -mlibrary-pic, copy in the pic
6710 flags if any from the new module. */
6714 /* If we have mixtures of -fpic and -fPIC, or in both bits. */
6718 /* One module was compiled for pic and the other was not, see if we have
6719 had any relocations that are not pic-safe. */
6720 else
6721 {
6724 else
6725 {
6727 #ifndef FRV_NO_PIC_ERROR
6733 #endif
6734 }
6735 }
6737 /* Warn if different cpu is used (allow a specific cpu to override
6738 the generic cpu). */
6742 ;
6747 else
6748 {
6750 {
6761 }
6764 {
6775 }
6776 }
6778 /* Print out any mismatches from above. */
6780 {
6785 }
6787 /* Warn about any other mismatches */
6791 {
6797 }
6798 }
6800 /* If the cpu is -mcpu=simple, then set the -mnopack bit. */
6804 /* Update the old flags now with changes made above. */
6812 {
6818 else
6822 }
6828 }
6830 \f
6831 bfd_boolean
6834 PTR ptr;
6835 {
6837 flagword flags;
6841 /* Print normal ELF private data. */
6848 {
6858 }
6861 {
6865 }
6868 {
6873 }
6876 {
6880 }
6911 }
6913 \f
6914 /* Support for core dump NOTE sections. */
6916 static bfd_boolean
6918 {
6923 {
6927 /* The Linux/FRV elf_prstatus struct is 268 bytes long. The other
6928 hardcoded offsets and sizes listed below (and contained within
6929 this lexical block) refer to fields in the target's elf_prstatus
6930 struct. */
6932 /* `pr_cursig' is at offset 12. */
6935 /* `pr_pid' is at offset 24. */
6938 /* `pr_reg' is at offset 72. */
6941 /* Most grok_prstatus implementations set `raw_size' to the size
6942 of the pr_reg field. For Linux/FRV, we set `raw_size' to be
6943 the size of `pr_reg' plus the size of `pr_exec_fdpic_loadmap'
6944 and `pr_interp_fdpic_loadmap', both of which (by design)
6945 immediately follow `pr_reg'. This will allow these fields to
6946 be viewed by GDB as registers.
6948 `pr_reg' is 184 bytes long. `pr_exec_fdpic_loadmap' and
6949 `pr_interp_fdpic_loadmap' are 4 bytes each. */
6953 }
6955 /* Make a ".reg/999" section. */
6958 }
6960 static bfd_boolean
6962 {
6964 {
6968 /* The Linux/FRV elf_prpsinfo struct is 124 bytes long. */
6971 /* `pr_fname' is found at offset 28 and is 16 bytes long. */
6975 /* `pr_psargs' is found at offset 44 and is 80 bytes long. */
6978 }
6980 /* Note that for some reason, a spurious space is tacked
6981 onto the end of the args in some (at least one anyway)
6982 implementations, so strip it off if it exists. */
6984 {
6990 }
6993 }
6994 #define ELF_ARCH bfd_arch_frv
6995 #define ELF_MACHINE_CODE EM_CYGNUS_FRV
6996 #define ELF_MAXPAGESIZE 0x1000
6998 #define TARGET_BIG_SYM bfd_elf32_frv_vec
7001 #define elf_info_to_howto frv_info_to_howto_rela
7002 #define elf_backend_relocate_section elf32_frv_relocate_section
7003 #define elf_backend_gc_mark_hook elf32_frv_gc_mark_hook
7004 #define elf_backend_check_relocs elf32_frv_check_relocs
7005 #define elf_backend_object_p elf32_frv_object_p
7006 #define elf_backend_add_symbol_hook elf32_frv_add_symbol_hook
7008 #define elf_backend_can_gc_sections 1
7009 #define elf_backend_rela_normal 1
7011 #define bfd_elf32_bfd_reloc_type_lookup frv_reloc_type_lookup
7012 #define bfd_elf32_bfd_reloc_name_lookup frv_reloc_name_lookup
7013 #define bfd_elf32_bfd_set_private_flags frv_elf_set_private_flags
7014 #define bfd_elf32_bfd_copy_private_bfd_data frv_elf_copy_private_bfd_data
7015 #define bfd_elf32_bfd_merge_private_bfd_data frv_elf_merge_private_bfd_data
7016 #define bfd_elf32_bfd_print_private_bfd_data frv_elf_print_private_bfd_data
7018 #define elf_backend_want_got_sym 1
7019 #define elf_backend_got_header_size 0
7020 #define elf_backend_want_got_plt 0
7021 #define elf_backend_plt_readonly 1
7022 #define elf_backend_want_plt_sym 0
7023 #define elf_backend_plt_header_size 0
7025 #define elf_backend_finish_dynamic_sections \
7026 elf32_frv_finish_dynamic_sections
7028 #define elf_backend_grok_prstatus elf32_frv_grok_prstatus
7029 #define elf_backend_grok_psinfo elf32_frv_grok_psinfo
7033 #undef ELF_MAXPAGESIZE
7034 #define ELF_MAXPAGESIZE 0x4000
7036 #undef TARGET_BIG_SYM
7037 #define TARGET_BIG_SYM bfd_elf32_frvfdpic_vec
7038 #undef TARGET_BIG_NAME
7040 #undef elf32_bed
7041 #define elf32_bed elf32_frvfdpic_bed
7043 #undef elf_info_to_howto_rel
7044 #define elf_info_to_howto_rel frvfdpic_info_to_howto_rel
7046 #undef bfd_elf32_bfd_link_hash_table_create
7047 #define bfd_elf32_bfd_link_hash_table_create \
7048 frvfdpic_elf_link_hash_table_create
7049 #undef elf_backend_always_size_sections
7050 #define elf_backend_always_size_sections \
7051 elf32_frvfdpic_always_size_sections
7052 #undef elf_backend_modify_program_headers
7053 #define elf_backend_modify_program_headers \
7054 elf32_frvfdpic_modify_program_headers
7055 #undef bfd_elf32_bfd_copy_private_bfd_data
7056 #define bfd_elf32_bfd_copy_private_bfd_data \
7057 elf32_frvfdpic_copy_private_bfd_data
7059 #undef elf_backend_create_dynamic_sections
7060 #define elf_backend_create_dynamic_sections \
7061 elf32_frvfdpic_create_dynamic_sections
7062 #undef elf_backend_adjust_dynamic_symbol
7063 #define elf_backend_adjust_dynamic_symbol \
7064 elf32_frvfdpic_adjust_dynamic_symbol
7065 #undef elf_backend_size_dynamic_sections
7066 #define elf_backend_size_dynamic_sections \
7067 elf32_frvfdpic_size_dynamic_sections
7068 #undef bfd_elf32_bfd_relax_section
7069 #define bfd_elf32_bfd_relax_section \
7070 elf32_frvfdpic_relax_section
7071 #undef elf_backend_finish_dynamic_symbol
7072 #define elf_backend_finish_dynamic_symbol \
7073 elf32_frvfdpic_finish_dynamic_symbol
7074 #undef elf_backend_finish_dynamic_sections
7075 #define elf_backend_finish_dynamic_sections \
7076 elf32_frvfdpic_finish_dynamic_sections
7078 #undef elf_backend_discard_info
7079 #define elf_backend_discard_info \
7080 frvfdpic_elf_discard_info
7081 #undef elf_backend_can_make_relative_eh_frame
7082 #define elf_backend_can_make_relative_eh_frame \
7083 frvfdpic_elf_use_relative_eh_frame
7084 #undef elf_backend_can_make_lsda_relative_eh_frame
7085 #define elf_backend_can_make_lsda_relative_eh_frame \
7086 frvfdpic_elf_use_relative_eh_frame
7087 #undef elf_backend_encode_eh_address
7088 #define elf_backend_encode_eh_address \
7089 frvfdpic_elf_encode_eh_address
7091 #undef elf_backend_may_use_rel_p
7092 #define elf_backend_may_use_rel_p 1
7093 #undef elf_backend_may_use_rela_p
7094 #define elf_backend_may_use_rela_p 1
7095 /* We use REL for dynamic relocations only. */
7096 #undef elf_backend_default_use_rela_p
7097 #define elf_backend_default_use_rela_p 1
7099 #undef elf_backend_omit_section_dynsym
7100 #define elf_backend_omit_section_dynsym _frvfdpic_link_omit_section_dynsym