bfd/

[binutils/xnox.git] / bfd / doc / reloc.texi

@section Relocations
BFD maintains relocations in much the same way it maintains
symbols: they are left alone until required, then read in
en-masse and translated into an internal form.  A common
routine @code{bfd_perform_relocation} acts upon the
canonical form to do the fixup.

Relocations are maintained on a per section basis,
while symbols are maintained on a per BFD basis.

All that a back end has to do to fit the BFD interface is to create
a @code{struct reloc_cache_entry} for each relocation
in a particular section, and fill in the right bits of the structures.

@menu
* typedef arelent::
* howto manager::
@end menu


@node typedef arelent, howto manager, Relocations, Relocations
@subsection typedef arelent
This is the structure of a relocation entry:


@example

typedef enum bfd_reloc_status
@{
  /* No errors detected.  */
  bfd_reloc_ok,

  /* The relocation was performed, but there was an overflow.  */
  bfd_reloc_overflow,

  /* The address to relocate was not within the section supplied.  */
  bfd_reloc_outofrange,

  /* Used by special functions.  */
  bfd_reloc_continue,

  /* Unsupported relocation size requested.  */
  bfd_reloc_notsupported,

  /* Unused.  */
  bfd_reloc_other,

  /* The symbol to relocate against was undefined.  */
  bfd_reloc_undefined,

  /* The relocation was performed, but may not be ok - presently
     generated only when linking i960 coff files with i960 b.out
     symbols.  If this type is returned, the error_message argument
     to bfd_perform_relocation will be set.  */
  bfd_reloc_dangerous
 @}
 bfd_reloc_status_type;


typedef struct reloc_cache_entry
@{
  /* A pointer into the canonical table of pointers.  */
  struct bfd_symbol **sym_ptr_ptr;

  /* offset in section.  */
  bfd_size_type address;

  /* addend for relocation value.  */
  bfd_vma addend;

  /* Pointer to how to perform the required relocation.  */
  reloc_howto_type *howto;

@}
arelent;

@end example
@strong{Description}@*
Here is a description of each of the fields within an @code{arelent}:

@itemize @bullet

@item
@code{sym_ptr_ptr}
@end itemize
The symbol table pointer points to a pointer to the symbol
associated with the relocation request.  It is the pointer
into the table returned by the back end's
@code{canonicalize_symtab} action. @xref{Symbols}. The symbol is
referenced through a pointer to a pointer so that tools like
the linker can fix up all the symbols of the same name by
modifying only one pointer. The relocation routine looks in
the symbol and uses the base of the section the symbol is
attached to and the value of the symbol as the initial
relocation offset. If the symbol pointer is zero, then the
section provided is looked up.

@itemize @bullet

@item
@code{address}
@end itemize
The @code{address} field gives the offset in bytes from the base of
the section data which owns the relocation record to the first
byte of relocatable information. The actual data relocated
will be relative to this point; for example, a relocation
type which modifies the bottom two bytes of a four byte word
would not touch the first byte pointed to in a big endian
world.

@itemize @bullet

@item
@code{addend}
@end itemize
The @code{addend} is a value provided by the back end to be added (!)
to the relocation offset. Its interpretation is dependent upon
the howto. For example, on the 68k the code:

@example
        char foo[];
        main()
                @{
                return foo[0x12345678];
                @}
@end example

Could be compiled into:

@example
        linkw fp,#-4
        moveb @@#12345678,d0
        extbl d0
        unlk fp
        rts
@end example

This could create a reloc pointing to @code{foo}, but leave the
offset in the data, something like:

@example
RELOCATION RECORDS FOR [.text]:
offset   type      value
00000006 32        _foo

00000000 4e56 fffc          ; linkw fp,#-4
00000004 1039 1234 5678     ; moveb @@#12345678,d0
0000000a 49c0               ; extbl d0
0000000c 4e5e               ; unlk fp
0000000e 4e75               ; rts
@end example

Using coff and an 88k, some instructions don't have enough
space in them to represent the full address range, and
pointers have to be loaded in two parts. So you'd get something like:

@example
        or.u     r13,r0,hi16(_foo+0x12345678)
        ld.b     r2,r13,lo16(_foo+0x12345678)
        jmp      r1
@end example

This should create two relocs, both pointing to @code{_foo}, and with
0x12340000 in their addend field. The data would consist of:

@example
RELOCATION RECORDS FOR [.text]:
offset   type      value
00000002 HVRT16    _foo+0x12340000
00000006 LVRT16    _foo+0x12340000

00000000 5da05678           ; or.u r13,r0,0x5678
00000004 1c4d5678           ; ld.b r2,r13,0x5678
00000008 f400c001           ; jmp r1
@end example

The relocation routine digs out the value from the data, adds
it to the addend to get the original offset, and then adds the
value of @code{_foo}. Note that all 32 bits have to be kept around
somewhere, to cope with carry from bit 15 to bit 16.

One further example is the sparc and the a.out format. The
sparc has a similar problem to the 88k, in that some
instructions don't have room for an entire offset, but on the
sparc the parts are created in odd sized lumps. The designers of
the a.out format chose to not use the data within the section
for storing part of the offset; all the offset is kept within
the reloc. Anything in the data should be ignored.

@example
        save %sp,-112,%sp
        sethi %hi(_foo+0x12345678),%g2
        ldsb [%g2+%lo(_foo+0x12345678)],%i0
        ret
        restore
@end example

Both relocs contain a pointer to @code{foo}, and the offsets
contain junk.

@example
RELOCATION RECORDS FOR [.text]:
offset   type      value
00000004 HI22      _foo+0x12345678
00000008 LO10      _foo+0x12345678

00000000 9de3bf90     ; save %sp,-112,%sp
00000004 05000000     ; sethi %hi(_foo+0),%g2
00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
0000000c 81c7e008     ; ret
00000010 81e80000     ; restore
@end example

@itemize @bullet

@item
@code{howto}
@end itemize
The @code{howto} field can be imagined as a
relocation instruction. It is a pointer to a structure which
contains information on what to do with all of the other
information in the reloc record and data section. A back end
would normally have a relocation instruction set and turn
relocations into pointers to the correct structure on input -
but it would be possible to create each howto field on demand.

@subsubsection @code{enum complain_overflow}
Indicates what sort of overflow checking should be done when
performing a relocation.


@example

enum complain_overflow
@{
  /* Do not complain on overflow.  */
  complain_overflow_dont,

  /* Complain if the value overflows when considered as a signed
     number one bit larger than the field.  ie. A bitfield of N bits
     is allowed to represent -2**n to 2**n-1.  */
  complain_overflow_bitfield,

  /* Complain if the value overflows when considered as a signed
     number.  */
  complain_overflow_signed,

  /* Complain if the value overflows when considered as an
     unsigned number.  */
  complain_overflow_unsigned
@};
@end example
@subsubsection @code{reloc_howto_type}
The @code{reloc_howto_type} is a structure which contains all the
information that libbfd needs to know to tie up a back end's data.


@example
struct bfd_symbol;             /* Forward declaration.  */

struct reloc_howto_struct
@{
  /*  The type field has mainly a documentary use - the back end can
      do what it wants with it, though normally the back end's
      external idea of what a reloc number is stored
      in this field.  For example, a PC relative word relocation
      in a coff environment has the type 023 - because that's
      what the outside world calls a R_PCRWORD reloc.  */
  unsigned int type;

  /*  The value the final relocation is shifted right by.  This drops
      unwanted data from the relocation.  */
  unsigned int rightshift;

  /*  The size of the item to be relocated.  This is *not* a
      power-of-two measure.  To get the number of bytes operated
      on by a type of relocation, use bfd_get_reloc_size.  */
  int size;

  /*  The number of bits in the item to be relocated.  This is used
      when doing overflow checking.  */
  unsigned int bitsize;

  /*  Notes that the relocation is relative to the location in the
      data section of the addend.  The relocation function will
      subtract from the relocation value the address of the location
      being relocated.  */
  bfd_boolean pc_relative;

  /*  The bit position of the reloc value in the destination.
      The relocated value is left shifted by this amount.  */
  unsigned int bitpos;

  /* What type of overflow error should be checked for when
     relocating.  */
  enum complain_overflow complain_on_overflow;

  /* If this field is non null, then the supplied function is
     called rather than the normal function.  This allows really
     strange relocation methods to be accommodated (e.g., i960 callj
     instructions).  */
  bfd_reloc_status_type (*special_function)
    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
     bfd *, char **);

  /* The textual name of the relocation type.  */
  char *name;

  /* Some formats record a relocation addend in the section contents
     rather than with the relocation.  For ELF formats this is the
     distinction between USE_REL and USE_RELA (though the code checks
     for USE_REL == 1/0).  The value of this field is TRUE if the
     addend is recorded with the section contents; when performing a
     partial link (ld -r) the section contents (the data) will be
     modified.  The value of this field is FALSE if addends are
     recorded with the relocation (in arelent.addend); when performing
     a partial link the relocation will be modified.
     All relocations for all ELF USE_RELA targets should set this field
     to FALSE (values of TRUE should be looked on with suspicion).
     However, the converse is not true: not all relocations of all ELF
     USE_REL targets set this field to TRUE.  Why this is so is peculiar
     to each particular target.  For relocs that aren't used in partial
     links (e.g. GOT stuff) it doesn't matter what this is set to.  */
  bfd_boolean partial_inplace;

  /* src_mask selects the part of the instruction (or data) to be used
     in the relocation sum.  If the target relocations don't have an
     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
     dst_mask to extract the addend from the section contents.  If
     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
     field should be zero.  Non-zero values for ELF USE_RELA targets are
     bogus as in those cases the value in the dst_mask part of the
     section contents should be treated as garbage.  */
  bfd_vma src_mask;

  /* dst_mask selects which parts of the instruction (or data) are
     replaced with a relocated value.  */
  bfd_vma dst_mask;

  /* When some formats create PC relative instructions, they leave
     the value of the pc of the place being relocated in the offset
     slot of the instruction, so that a PC relative relocation can
     be made just by adding in an ordinary offset (e.g., sun3 a.out).
     Some formats leave the displacement part of an instruction
     empty (e.g., m88k bcs); this flag signals the fact.  */
  bfd_boolean pcrel_offset;
@};

@end example
@findex The HOWTO Macro
@subsubsection @code{The HOWTO Macro}
@strong{Description}@*
The HOWTO define is horrible and will go away.
@example
#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
  @{ (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC @}
@end example

@strong{Description}@*
And will be replaced with the totally magic way. But for the
moment, we are compatible, so do it this way.
@example
#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
         NAME, FALSE, 0, 0, IN)

@end example

@strong{Description}@*
This is used to fill in an empty howto entry in an array.
@example
#define EMPTY_HOWTO(C) \
  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
         NULL, FALSE, 0, 0, FALSE)

@end example

@strong{Description}@*
Helper routine to turn a symbol into a relocation value.
@example
#define HOWTO_PREPARE(relocation, symbol)               \
  @{                                                     \
    if (symbol != NULL)                                 \
      @{                                                 \
        if (bfd_is_com_section (symbol->section))       \
          @{                                             \
            relocation = 0;                             \
          @}                                             \
        else                                            \
          @{                                             \
            relocation = symbol->value;                 \
          @}                                             \
      @}                                                 \
  @}

@end example

@findex bfd_get_reloc_size
@subsubsection @code{bfd_get_reloc_size}
@strong{Synopsis}
@example
unsigned int bfd_get_reloc_size (reloc_howto_type *);
@end example
@strong{Description}@*
For a reloc_howto_type that operates on a fixed number of bytes,
this returns the number of bytes operated on.

@findex arelent_chain
@subsubsection @code{arelent_chain}
@strong{Description}@*
How relocs are tied together in an @code{asection}:
@example
typedef struct relent_chain
@{
  arelent relent;
  struct relent_chain *next;
@}
arelent_chain;

@end example

@findex bfd_check_overflow
@subsubsection @code{bfd_check_overflow}
@strong{Synopsis}
@example
bfd_reloc_status_type bfd_check_overflow
   (enum complain_overflow how,
    unsigned int bitsize,
    unsigned int rightshift,
    unsigned int addrsize,
    bfd_vma relocation);
@end example
@strong{Description}@*
Perform overflow checking on @var{relocation} which has
@var{bitsize} significant bits and will be shifted right by
@var{rightshift} bits, on a machine with addresses containing
@var{addrsize} significant bits.  The result is either of
@code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.

@findex bfd_perform_relocation
@subsubsection @code{bfd_perform_relocation}
@strong{Synopsis}
@example
bfd_reloc_status_type bfd_perform_relocation
   (bfd *abfd,
    arelent *reloc_entry,
    void *data,
    asection *input_section,
    bfd *output_bfd,
    char **error_message);
@end example
@strong{Description}@*
If @var{output_bfd} is supplied to this function, the
generated image will be relocatable; the relocations are
copied to the output file after they have been changed to
reflect the new state of the world. There are two ways of
reflecting the results of partial linkage in an output file:
by modifying the output data in place, and by modifying the
relocation record.  Some native formats (e.g., basic a.out and
basic coff) have no way of specifying an addend in the
relocation type, so the addend has to go in the output data.
This is no big deal since in these formats the output data
slot will always be big enough for the addend. Complex reloc
types with addends were invented to solve just this problem.
The @var{error_message} argument is set to an error message if
this return @code{bfd_reloc_dangerous}.

@findex bfd_install_relocation
@subsubsection @code{bfd_install_relocation}
@strong{Synopsis}
@example
bfd_reloc_status_type bfd_install_relocation
   (bfd *abfd,
    arelent *reloc_entry,
    void *data, bfd_vma data_start,
    asection *input_section,
    char **error_message);
@end example
@strong{Description}@*
This looks remarkably like @code{bfd_perform_relocation}, except it
does not expect that the section contents have been filled in.
I.e., it's suitable for use when creating, rather than applying
a relocation.

For now, this function should be considered reserved for the
assembler.


@node howto manager,  , typedef arelent, Relocations
@subsection The howto manager
When an application wants to create a relocation, but doesn't
know what the target machine might call it, it can find out by
using this bit of code.

@findex bfd_reloc_code_type
@subsubsection @code{bfd_reloc_code_type}
@strong{Description}@*
The insides of a reloc code.  The idea is that, eventually, there
will be one enumerator for every type of relocation we ever do.
Pass one of these values to @code{bfd_reloc_type_lookup}, and it'll
return a howto pointer.

This does mean that the application must determine the correct
enumerator value; you can't get a howto pointer from a random set
of attributes.

Here are the possible values for @code{enum bfd_reloc_code_real}:

@deffn {} BFD_RELOC_64
@deffnx {} BFD_RELOC_32
@deffnx {} BFD_RELOC_26
@deffnx {} BFD_RELOC_24
@deffnx {} BFD_RELOC_16
@deffnx {} BFD_RELOC_14
@deffnx {} BFD_RELOC_8
Basic absolute relocations of N bits.
@end deffn
@deffn {} BFD_RELOC_64_PCREL
@deffnx {} BFD_RELOC_32_PCREL
@deffnx {} BFD_RELOC_24_PCREL
@deffnx {} BFD_RELOC_16_PCREL
@deffnx {} BFD_RELOC_12_PCREL
@deffnx {} BFD_RELOC_8_PCREL
PC-relative relocations.  Sometimes these are relative to the address
of the relocation itself; sometimes they are relative to the start of
the section containing the relocation.  It depends on the specific target.

The 24-bit relocation is used in some Intel 960 configurations.
@end deffn
@deffn {} BFD_RELOC_32_SECREL
Section relative relocations.  Some targets need this for DWARF2.
@end deffn
@deffn {} BFD_RELOC_32_GOT_PCREL
@deffnx {} BFD_RELOC_16_GOT_PCREL
@deffnx {} BFD_RELOC_8_GOT_PCREL
@deffnx {} BFD_RELOC_32_GOTOFF
@deffnx {} BFD_RELOC_16_GOTOFF
@deffnx {} BFD_RELOC_LO16_GOTOFF
@deffnx {} BFD_RELOC_HI16_GOTOFF
@deffnx {} BFD_RELOC_HI16_S_GOTOFF
@deffnx {} BFD_RELOC_8_GOTOFF
@deffnx {} BFD_RELOC_64_PLT_PCREL
@deffnx {} BFD_RELOC_32_PLT_PCREL
@deffnx {} BFD_RELOC_24_PLT_PCREL
@deffnx {} BFD_RELOC_16_PLT_PCREL
@deffnx {} BFD_RELOC_8_PLT_PCREL
@deffnx {} BFD_RELOC_64_PLTOFF
@deffnx {} BFD_RELOC_32_PLTOFF
@deffnx {} BFD_RELOC_16_PLTOFF
@deffnx {} BFD_RELOC_LO16_PLTOFF
@deffnx {} BFD_RELOC_HI16_PLTOFF
@deffnx {} BFD_RELOC_HI16_S_PLTOFF
@deffnx {} BFD_RELOC_8_PLTOFF
For ELF.
@end deffn
@deffn {} BFD_RELOC_68K_GLOB_DAT
@deffnx {} BFD_RELOC_68K_JMP_SLOT
@deffnx {} BFD_RELOC_68K_RELATIVE
@deffnx {} BFD_RELOC_68K_TLS_GD32
@deffnx {} BFD_RELOC_68K_TLS_GD16
@deffnx {} BFD_RELOC_68K_TLS_GD8
@deffnx {} BFD_RELOC_68K_TLS_LDM32
@deffnx {} BFD_RELOC_68K_TLS_LDM16
@deffnx {} BFD_RELOC_68K_TLS_LDM8
@deffnx {} BFD_RELOC_68K_TLS_LDO32
@deffnx {} BFD_RELOC_68K_TLS_LDO16
@deffnx {} BFD_RELOC_68K_TLS_LDO8
@deffnx {} BFD_RELOC_68K_TLS_IE32
@deffnx {} BFD_RELOC_68K_TLS_IE16
@deffnx {} BFD_RELOC_68K_TLS_IE8
@deffnx {} BFD_RELOC_68K_TLS_LE32
@deffnx {} BFD_RELOC_68K_TLS_LE16
@deffnx {} BFD_RELOC_68K_TLS_LE8
Relocations used by 68K ELF.
@end deffn
@deffn {} BFD_RELOC_32_BASEREL
@deffnx {} BFD_RELOC_16_BASEREL
@deffnx {} BFD_RELOC_LO16_BASEREL
@deffnx {} BFD_RELOC_HI16_BASEREL
@deffnx {} BFD_RELOC_HI16_S_BASEREL
@deffnx {} BFD_RELOC_8_BASEREL
@deffnx {} BFD_RELOC_RVA
Linkage-table relative.
@end deffn
@deffn {} BFD_RELOC_8_FFnn
Absolute 8-bit relocation, but used to form an address like 0xFFnn.
@end deffn
@deffn {} BFD_RELOC_32_PCREL_S2
@deffnx {} BFD_RELOC_16_PCREL_S2
@deffnx {} BFD_RELOC_23_PCREL_S2
These PC-relative relocations are stored as word displacements --
i.e., byte displacements shifted right two bits.  The 30-bit word
displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
signed 16-bit displacement is used on the MIPS, and the 23-bit
displacement is used on the Alpha.
@end deffn
@deffn {} BFD_RELOC_HI22
@deffnx {} BFD_RELOC_LO10
High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
the target word.  These are used on the SPARC.
@end deffn
@deffn {} BFD_RELOC_GPREL16
@deffnx {} BFD_RELOC_GPREL32
For systems that allocate a Global Pointer register, these are
displacements off that register.  These relocation types are
handled specially, because the value the register will have is
decided relatively late.
@end deffn
@deffn {} BFD_RELOC_I960_CALLJ
Reloc types used for i960/b.out.
@end deffn
@deffn {} BFD_RELOC_NONE
@deffnx {} BFD_RELOC_SPARC_WDISP22
@deffnx {} BFD_RELOC_SPARC22
@deffnx {} BFD_RELOC_SPARC13
@deffnx {} BFD_RELOC_SPARC_GOT10
@deffnx {} BFD_RELOC_SPARC_GOT13
@deffnx {} BFD_RELOC_SPARC_GOT22
@deffnx {} BFD_RELOC_SPARC_PC10
@deffnx {} BFD_RELOC_SPARC_PC22
@deffnx {} BFD_RELOC_SPARC_WPLT30
@deffnx {} BFD_RELOC_SPARC_COPY
@deffnx {} BFD_RELOC_SPARC_GLOB_DAT
@deffnx {} BFD_RELOC_SPARC_JMP_SLOT
@deffnx {} BFD_RELOC_SPARC_RELATIVE
@deffnx {} BFD_RELOC_SPARC_UA16
@deffnx {} BFD_RELOC_SPARC_UA32
@deffnx {} BFD_RELOC_SPARC_UA64
@deffnx {} BFD_RELOC_SPARC_GOTDATA_HIX22
@deffnx {} BFD_RELOC_SPARC_GOTDATA_LOX10
@deffnx {} BFD_RELOC_SPARC_GOTDATA_OP_HIX22
@deffnx {} BFD_RELOC_SPARC_GOTDATA_OP_LOX10
@deffnx {} BFD_RELOC_SPARC_GOTDATA_OP
SPARC ELF relocations.  There is probably some overlap with other
relocation types already defined.
@end deffn
@deffn {} BFD_RELOC_SPARC_BASE13
@deffnx {} BFD_RELOC_SPARC_BASE22
I think these are specific to SPARC a.out (e.g., Sun 4).
@end deffn
@deffn {} BFD_RELOC_SPARC_64
@deffnx {} BFD_RELOC_SPARC_10
@deffnx {} BFD_RELOC_SPARC_11
@deffnx {} BFD_RELOC_SPARC_OLO10
@deffnx {} BFD_RELOC_SPARC_HH22
@deffnx {} BFD_RELOC_SPARC_HM10
@deffnx {} BFD_RELOC_SPARC_LM22
@deffnx {} BFD_RELOC_SPARC_PC_HH22
@deffnx {} BFD_RELOC_SPARC_PC_HM10
@deffnx {} BFD_RELOC_SPARC_PC_LM22
@deffnx {} BFD_RELOC_SPARC_WDISP16
@deffnx {} BFD_RELOC_SPARC_WDISP19
@deffnx {} BFD_RELOC_SPARC_7
@deffnx {} BFD_RELOC_SPARC_6
@deffnx {} BFD_RELOC_SPARC_5
@deffnx {} BFD_RELOC_SPARC_DISP64
@deffnx {} BFD_RELOC_SPARC_PLT32
@deffnx {} BFD_RELOC_SPARC_PLT64
@deffnx {} BFD_RELOC_SPARC_HIX22
@deffnx {} BFD_RELOC_SPARC_LOX10
@deffnx {} BFD_RELOC_SPARC_H44
@deffnx {} BFD_RELOC_SPARC_M44
@deffnx {} BFD_RELOC_SPARC_L44
@deffnx {} BFD_RELOC_SPARC_REGISTER
SPARC64 relocations
@end deffn
@deffn {} BFD_RELOC_SPARC_REV32
SPARC little endian relocation
@end deffn
@deffn {} BFD_RELOC_SPARC_TLS_GD_HI22
@deffnx {} BFD_RELOC_SPARC_TLS_GD_LO10
@deffnx {} BFD_RELOC_SPARC_TLS_GD_ADD
@deffnx {} BFD_RELOC_SPARC_TLS_GD_CALL
@deffnx {} BFD_RELOC_SPARC_TLS_LDM_HI22
@deffnx {} BFD_RELOC_SPARC_TLS_LDM_LO10
@deffnx {} BFD_RELOC_SPARC_TLS_LDM_ADD
@deffnx {} BFD_RELOC_SPARC_TLS_LDM_CALL
@deffnx {} BFD_RELOC_SPARC_TLS_LDO_HIX22
@deffnx {} BFD_RELOC_SPARC_TLS_LDO_LOX10
@deffnx {} BFD_RELOC_SPARC_TLS_LDO_ADD
@deffnx {} BFD_RELOC_SPARC_TLS_IE_HI22
@deffnx {} BFD_RELOC_SPARC_TLS_IE_LO10
@deffnx {} BFD_RELOC_SPARC_TLS_IE_LD
@deffnx {} BFD_RELOC_SPARC_TLS_IE_LDX
@deffnx {} BFD_RELOC_SPARC_TLS_IE_ADD
@deffnx {} BFD_RELOC_SPARC_TLS_LE_HIX22
@deffnx {} BFD_RELOC_SPARC_TLS_LE_LOX10
@deffnx {} BFD_RELOC_SPARC_TLS_DTPMOD32
@deffnx {} BFD_RELOC_SPARC_TLS_DTPMOD64
@deffnx {} BFD_RELOC_SPARC_TLS_DTPOFF32
@deffnx {} BFD_RELOC_SPARC_TLS_DTPOFF64
@deffnx {} BFD_RELOC_SPARC_TLS_TPOFF32
@deffnx {} BFD_RELOC_SPARC_TLS_TPOFF64
SPARC TLS relocations
@end deffn
@deffn {} BFD_RELOC_SPU_IMM7
@deffnx {} BFD_RELOC_SPU_IMM8
@deffnx {} BFD_RELOC_SPU_IMM10
@deffnx {} BFD_RELOC_SPU_IMM10W
@deffnx {} BFD_RELOC_SPU_IMM16
@deffnx {} BFD_RELOC_SPU_IMM16W
@deffnx {} BFD_RELOC_SPU_IMM18
@deffnx {} BFD_RELOC_SPU_PCREL9a
@deffnx {} BFD_RELOC_SPU_PCREL9b
@deffnx {} BFD_RELOC_SPU_PCREL16
@deffnx {} BFD_RELOC_SPU_LO16
@deffnx {} BFD_RELOC_SPU_HI16
@deffnx {} BFD_RELOC_SPU_PPU32
@deffnx {} BFD_RELOC_SPU_PPU64
@deffnx {} BFD_RELOC_SPU_ADD_PIC
SPU Relocations.
@end deffn
@deffn {} BFD_RELOC_ALPHA_GPDISP_HI16
Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
"addend" in some special way.
For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
writing; when reading, it will be the absolute section symbol.  The
addend is the displacement in bytes of the "lda" instruction from
the "ldah" instruction (which is at the address of this reloc).
@end deffn
@deffn {} BFD_RELOC_ALPHA_GPDISP_LO16
For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
with GPDISP_HI16 relocs.  The addend is ignored when writing the
relocations out, and is filled in with the file's GP value on
reading, for convenience.
@end deffn
@deffn {} BFD_RELOC_ALPHA_GPDISP
The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
relocation except that there is no accompanying GPDISP_LO16
relocation.
@end deffn
@deffn {} BFD_RELOC_ALPHA_LITERAL
@deffnx {} BFD_RELOC_ALPHA_ELF_LITERAL
@deffnx {} BFD_RELOC_ALPHA_LITUSE
The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
the assembler turns it into a LDQ instruction to load the address of
the symbol, and then fills in a register in the real instruction.

The LITERAL reloc, at the LDQ instruction, refers to the .lita
section symbol.  The addend is ignored when writing, but is filled
in with the file's GP value on reading, for convenience, as with the
GPDISP_LO16 reloc.

The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
It should refer to the symbol to be referenced, as with 16_GOTOFF,
but it generates output not based on the position within the .got
section, but relative to the GP value chosen for the file during the
final link stage.

The LITUSE reloc, on the instruction using the loaded address, gives
information to the linker that it might be able to use to optimize
away some literal section references.  The symbol is ignored (read
as the absolute section symbol), and the "addend" indicates the type
of instruction using the register:
1 - "memory" fmt insn
2 - byte-manipulation (byte offset reg)
3 - jsr (target of branch)
@end deffn
@deffn {} BFD_RELOC_ALPHA_HINT
The HINT relocation indicates a value that should be filled into the
"hint" field of a jmp/jsr/ret instruction, for possible branch-
prediction logic which may be provided on some processors.
@end deffn
@deffn {} BFD_RELOC_ALPHA_LINKAGE
The LINKAGE relocation outputs a linkage pair in the object file,
which is filled by the linker.
@end deffn
@deffn {} BFD_RELOC_ALPHA_CODEADDR
The CODEADDR relocation outputs a STO_CA in the object file,
which is filled by the linker.
@end deffn
@deffn {} BFD_RELOC_ALPHA_GPREL_HI16
@deffnx {} BFD_RELOC_ALPHA_GPREL_LO16
The GPREL_HI/LO relocations together form a 32-bit offset from the
GP register.
@end deffn
@deffn {} BFD_RELOC_ALPHA_BRSGP
Like BFD_RELOC_23_PCREL_S2, except that the source and target must
share a common GP, and the target address is adjusted for
STO_ALPHA_STD_GPLOAD.
@end deffn
@deffn {} BFD_RELOC_ALPHA_NOP
The NOP relocation outputs a NOP if the longword displacement
between two procedure entry points is < 2^21.
@end deffn
@deffn {} BFD_RELOC_ALPHA_BSR
The BSR relocation outputs a BSR if the longword displacement
between two procedure entry points is < 2^21.
@end deffn
@deffn {} BFD_RELOC_ALPHA_LDA
The LDA relocation outputs a LDA if the longword displacement
between two procedure entry points is < 2^16.
@end deffn
@deffn {} BFD_RELOC_ALPHA_BOH
The BOH relocation outputs a BSR if the longword displacement
between two procedure entry points is < 2^21, or else a hint.
@end deffn
@deffn {} BFD_RELOC_ALPHA_TLSGD
@deffnx {} BFD_RELOC_ALPHA_TLSLDM
@deffnx {} BFD_RELOC_ALPHA_DTPMOD64
@deffnx {} BFD_RELOC_ALPHA_GOTDTPREL16
@deffnx {} BFD_RELOC_ALPHA_DTPREL64
@deffnx {} BFD_RELOC_ALPHA_DTPREL_HI16
@deffnx {} BFD_RELOC_ALPHA_DTPREL_LO16
@deffnx {} BFD_RELOC_ALPHA_DTPREL16
@deffnx {} BFD_RELOC_ALPHA_GOTTPREL16
@deffnx {} BFD_RELOC_ALPHA_TPREL64
@deffnx {} BFD_RELOC_ALPHA_TPREL_HI16
@deffnx {} BFD_RELOC_ALPHA_TPREL_LO16
@deffnx {} BFD_RELOC_ALPHA_TPREL16
Alpha thread-local storage relocations.
@end deffn
@deffn {} BFD_RELOC_MIPS_JMP
Bits 27..2 of the relocation address shifted right 2 bits;
simple reloc otherwise.
@end deffn
@deffn {} BFD_RELOC_MIPS16_JMP
The MIPS16 jump instruction.
@end deffn
@deffn {} BFD_RELOC_MIPS16_GPREL
MIPS16 GP relative reloc.
@end deffn
@deffn {} BFD_RELOC_HI16
High 16 bits of 32-bit value; simple reloc.
@end deffn
@deffn {} BFD_RELOC_HI16_S
High 16 bits of 32-bit value but the low 16 bits will be sign
extended and added to form the final result.  If the low 16
bits form a negative number, we need to add one to the high value
to compensate for the borrow when the low bits are added.
@end deffn
@deffn {} BFD_RELOC_LO16
Low 16 bits.
@end deffn
@deffn {} BFD_RELOC_HI16_PCREL
High 16 bits of 32-bit pc-relative value
@end deffn
@deffn {} BFD_RELOC_HI16_S_PCREL
High 16 bits of 32-bit pc-relative value, adjusted
@end deffn
@deffn {} BFD_RELOC_LO16_PCREL
Low 16 bits of pc-relative value
@end deffn
@deffn {} BFD_RELOC_MIPS16_GOT16
@deffnx {} BFD_RELOC_MIPS16_CALL16
Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
16-bit immediate fields
@end deffn
@deffn {} BFD_RELOC_MIPS16_HI16
MIPS16 high 16 bits of 32-bit value.
@end deffn
@deffn {} BFD_RELOC_MIPS16_HI16_S
MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
extended and added to form the final result.  If the low 16
bits form a negative number, we need to add one to the high value
to compensate for the borrow when the low bits are added.
@end deffn
@deffn {} BFD_RELOC_MIPS16_LO16
MIPS16 low 16 bits.
@end deffn
@deffn {} BFD_RELOC_MIPS_LITERAL
Relocation against a MIPS literal section.
@end deffn
@deffn {} BFD_RELOC_MIPS_GOT16
@deffnx {} BFD_RELOC_MIPS_CALL16
@deffnx {} BFD_RELOC_MIPS_GOT_HI16
@deffnx {} BFD_RELOC_MIPS_GOT_LO16
@deffnx {} BFD_RELOC_MIPS_CALL_HI16
@deffnx {} BFD_RELOC_MIPS_CALL_LO16
@deffnx {} BFD_RELOC_MIPS_SUB
@deffnx {} BFD_RELOC_MIPS_GOT_PAGE
@deffnx {} BFD_RELOC_MIPS_GOT_OFST
@deffnx {} BFD_RELOC_MIPS_GOT_DISP
@deffnx {} BFD_RELOC_MIPS_SHIFT5
@deffnx {} BFD_RELOC_MIPS_SHIFT6
@deffnx {} BFD_RELOC_MIPS_INSERT_A
@deffnx {} BFD_RELOC_MIPS_INSERT_B
@deffnx {} BFD_RELOC_MIPS_DELETE
@deffnx {} BFD_RELOC_MIPS_HIGHEST
@deffnx {} BFD_RELOC_MIPS_HIGHER
@deffnx {} BFD_RELOC_MIPS_SCN_DISP
@deffnx {} BFD_RELOC_MIPS_REL16
@deffnx {} BFD_RELOC_MIPS_RELGOT
@deffnx {} BFD_RELOC_MIPS_JALR
@deffnx {} BFD_RELOC_MIPS_TLS_DTPMOD32
@deffnx {} BFD_RELOC_MIPS_TLS_DTPREL32
@deffnx {} BFD_RELOC_MIPS_TLS_DTPMOD64
@deffnx {} BFD_RELOC_MIPS_TLS_DTPREL64
@deffnx {} BFD_RELOC_MIPS_TLS_GD
@deffnx {} BFD_RELOC_MIPS_TLS_LDM
@deffnx {} BFD_RELOC_MIPS_TLS_DTPREL_HI16
@deffnx {} BFD_RELOC_MIPS_TLS_DTPREL_LO16
@deffnx {} BFD_RELOC_MIPS_TLS_GOTTPREL
@deffnx {} BFD_RELOC_MIPS_TLS_TPREL32
@deffnx {} BFD_RELOC_MIPS_TLS_TPREL64
@deffnx {} BFD_RELOC_MIPS_TLS_TPREL_HI16
@deffnx {} BFD_RELOC_MIPS_TLS_TPREL_LO16
MIPS ELF relocations.
@end deffn
@deffn {} BFD_RELOC_MIPS_COPY
@deffnx {} BFD_RELOC_MIPS_JUMP_SLOT
MIPS ELF relocations (VxWorks and PLT extensions).
@end deffn
@deffn {} BFD_RELOC_MOXIE_10_PCREL
Moxie ELF relocations.
@end deffn
@deffn {} BFD_RELOC_FRV_LABEL16
@deffnx {} BFD_RELOC_FRV_LABEL24
@deffnx {} BFD_RELOC_FRV_LO16
@deffnx {} BFD_RELOC_FRV_HI16
@deffnx {} BFD_RELOC_FRV_GPREL12
@deffnx {} BFD_RELOC_FRV_GPRELU12
@deffnx {} BFD_RELOC_FRV_GPREL32
@deffnx {} BFD_RELOC_FRV_GPRELHI
@deffnx {} BFD_RELOC_FRV_GPRELLO
@deffnx {} BFD_RELOC_FRV_GOT12
@deffnx {} BFD_RELOC_FRV_GOTHI
@deffnx {} BFD_RELOC_FRV_GOTLO
@deffnx {} BFD_RELOC_FRV_FUNCDESC
@deffnx {} BFD_RELOC_FRV_FUNCDESC_GOT12
@deffnx {} BFD_RELOC_FRV_FUNCDESC_GOTHI
@deffnx {} BFD_RELOC_FRV_FUNCDESC_GOTLO
@deffnx {} BFD_RELOC_FRV_FUNCDESC_VALUE
@deffnx {} BFD_RELOC_FRV_FUNCDESC_GOTOFF12
@deffnx {} BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
@deffnx {} BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
@deffnx {} BFD_RELOC_FRV_GOTOFF12
@deffnx {} BFD_RELOC_FRV_GOTOFFHI
@deffnx {} BFD_RELOC_FRV_GOTOFFLO
@deffnx {} BFD_RELOC_FRV_GETTLSOFF
@deffnx {} BFD_RELOC_FRV_TLSDESC_VALUE
@deffnx {} BFD_RELOC_FRV_GOTTLSDESC12
@deffnx {} BFD_RELOC_FRV_GOTTLSDESCHI
@deffnx {} BFD_RELOC_FRV_GOTTLSDESCLO
@deffnx {} BFD_RELOC_FRV_TLSMOFF12
@deffnx {} BFD_RELOC_FRV_TLSMOFFHI
@deffnx {} BFD_RELOC_FRV_TLSMOFFLO
@deffnx {} BFD_RELOC_FRV_GOTTLSOFF12
@deffnx {} BFD_RELOC_FRV_GOTTLSOFFHI
@deffnx {} BFD_RELOC_FRV_GOTTLSOFFLO
@deffnx {} BFD_RELOC_FRV_TLSOFF
@deffnx {} BFD_RELOC_FRV_TLSDESC_RELAX
@deffnx {} BFD_RELOC_FRV_GETTLSOFF_RELAX
@deffnx {} BFD_RELOC_FRV_TLSOFF_RELAX
@deffnx {} BFD_RELOC_FRV_TLSMOFF
Fujitsu Frv Relocations.
@end deffn
@deffn {} BFD_RELOC_MN10300_GOTOFF24
This is a 24bit GOT-relative reloc for the mn10300.
@end deffn
@deffn {} BFD_RELOC_MN10300_GOT32
This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
in the instruction.
@end deffn
@deffn {} BFD_RELOC_MN10300_GOT24
This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
in the instruction.
@end deffn
@deffn {} BFD_RELOC_MN10300_GOT16
This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
in the instruction.
@end deffn
@deffn {} BFD_RELOC_MN10300_COPY
Copy symbol at runtime.
@end deffn
@deffn {} BFD_RELOC_MN10300_GLOB_DAT
Create GOT entry.
@end deffn
@deffn {} BFD_RELOC_MN10300_JMP_SLOT
Create PLT entry.
@end deffn
@deffn {} BFD_RELOC_MN10300_RELATIVE
Adjust by program base.
@end deffn
@deffn {} BFD_RELOC_MN10300_SYM_DIFF
Together with another reloc targeted at the same location,
allows for a value that is the difference of two symbols
in the same section.
@end deffn
@deffn {} BFD_RELOC_MN10300_ALIGN
The addend of this reloc is an alignment power that must
be honoured at the offset's location, regardless of linker
relaxation.
@end deffn
@deffn {} BFD_RELOC_386_GOT32
@deffnx {} BFD_RELOC_386_PLT32
@deffnx {} BFD_RELOC_386_COPY
@deffnx {} BFD_RELOC_386_GLOB_DAT
@deffnx {} BFD_RELOC_386_JUMP_SLOT
@deffnx {} BFD_RELOC_386_RELATIVE
@deffnx {} BFD_RELOC_386_GOTOFF
@deffnx {} BFD_RELOC_386_GOTPC
@deffnx {} BFD_RELOC_386_TLS_TPOFF
@deffnx {} BFD_RELOC_386_TLS_IE
@deffnx {} BFD_RELOC_386_TLS_GOTIE
@deffnx {} BFD_RELOC_386_TLS_LE
@deffnx {} BFD_RELOC_386_TLS_GD
@deffnx {} BFD_RELOC_386_TLS_LDM
@deffnx {} BFD_RELOC_386_TLS_LDO_32
@deffnx {} BFD_RELOC_386_TLS_IE_32
@deffnx {} BFD_RELOC_386_TLS_LE_32
@deffnx {} BFD_RELOC_386_TLS_DTPMOD32
@deffnx {} BFD_RELOC_386_TLS_DTPOFF32
@deffnx {} BFD_RELOC_386_TLS_TPOFF32
@deffnx {} BFD_RELOC_386_TLS_GOTDESC
@deffnx {} BFD_RELOC_386_TLS_DESC_CALL
@deffnx {} BFD_RELOC_386_TLS_DESC
@deffnx {} BFD_RELOC_386_IRELATIVE
i386/elf relocations
@end deffn
@deffn {} BFD_RELOC_X86_64_GOT32
@deffnx {} BFD_RELOC_X86_64_PLT32
@deffnx {} BFD_RELOC_X86_64_COPY
@deffnx {} BFD_RELOC_X86_64_GLOB_DAT
@deffnx {} BFD_RELOC_X86_64_JUMP_SLOT
@deffnx {} BFD_RELOC_X86_64_RELATIVE
@deffnx {} BFD_RELOC_X86_64_GOTPCREL
@deffnx {} BFD_RELOC_X86_64_32S
@deffnx {} BFD_RELOC_X86_64_DTPMOD64
@deffnx {} BFD_RELOC_X86_64_DTPOFF64
@deffnx {} BFD_RELOC_X86_64_TPOFF64
@deffnx {} BFD_RELOC_X86_64_TLSGD
@deffnx {} BFD_RELOC_X86_64_TLSLD
@deffnx {} BFD_RELOC_X86_64_DTPOFF32
@deffnx {} BFD_RELOC_X86_64_GOTTPOFF
@deffnx {} BFD_RELOC_X86_64_TPOFF32
@deffnx {} BFD_RELOC_X86_64_GOTOFF64
@deffnx {} BFD_RELOC_X86_64_GOTPC32
@deffnx {} BFD_RELOC_X86_64_GOT64
@deffnx {} BFD_RELOC_X86_64_GOTPCREL64
@deffnx {} BFD_RELOC_X86_64_GOTPC64
@deffnx {} BFD_RELOC_X86_64_GOTPLT64
@deffnx {} BFD_RELOC_X86_64_PLTOFF64
@deffnx {} BFD_RELOC_X86_64_GOTPC32_TLSDESC
@deffnx {} BFD_RELOC_X86_64_TLSDESC_CALL
@deffnx {} BFD_RELOC_X86_64_TLSDESC
@deffnx {} BFD_RELOC_X86_64_IRELATIVE
x86-64/elf relocations
@end deffn
@deffn {} BFD_RELOC_NS32K_IMM_8
@deffnx {} BFD_RELOC_NS32K_IMM_16
@deffnx {} BFD_RELOC_NS32K_IMM_32
@deffnx {} BFD_RELOC_NS32K_IMM_8_PCREL
@deffnx {} BFD_RELOC_NS32K_IMM_16_PCREL
@deffnx {} BFD_RELOC_NS32K_IMM_32_PCREL
@deffnx {} BFD_RELOC_NS32K_DISP_8
@deffnx {} BFD_RELOC_NS32K_DISP_16
@deffnx {} BFD_RELOC_NS32K_DISP_32
@deffnx {} BFD_RELOC_NS32K_DISP_8_PCREL
@deffnx {} BFD_RELOC_NS32K_DISP_16_PCREL
@deffnx {} BFD_RELOC_NS32K_DISP_32_PCREL
ns32k relocations
@end deffn
@deffn {} BFD_RELOC_PDP11_DISP_8_PCREL
@deffnx {} BFD_RELOC_PDP11_DISP_6_PCREL
PDP11 relocations
@end deffn
@deffn {} BFD_RELOC_PJ_CODE_HI16
@deffnx {} BFD_RELOC_PJ_CODE_LO16
@deffnx {} BFD_RELOC_PJ_CODE_DIR16
@deffnx {} BFD_RELOC_PJ_CODE_DIR32
@deffnx {} BFD_RELOC_PJ_CODE_REL16
@deffnx {} BFD_RELOC_PJ_CODE_REL32
Picojava relocs.  Not all of these appear in object files.
@end deffn
@deffn {} BFD_RELOC_PPC_B26
@deffnx {} BFD_RELOC_PPC_BA26
@deffnx {} BFD_RELOC_PPC_TOC16
@deffnx {} BFD_RELOC_PPC_B16
@deffnx {} BFD_RELOC_PPC_B16_BRTAKEN
@deffnx {} BFD_RELOC_PPC_B16_BRNTAKEN
@deffnx {} BFD_RELOC_PPC_BA16
@deffnx {} BFD_RELOC_PPC_BA16_BRTAKEN
@deffnx {} BFD_RELOC_PPC_BA16_BRNTAKEN
@deffnx {} BFD_RELOC_PPC_COPY
@deffnx {} BFD_RELOC_PPC_GLOB_DAT
@deffnx {} BFD_RELOC_PPC_JMP_SLOT
@deffnx {} BFD_RELOC_PPC_RELATIVE
@deffnx {} BFD_RELOC_PPC_LOCAL24PC
@deffnx {} BFD_RELOC_PPC_EMB_NADDR32
@deffnx {} BFD_RELOC_PPC_EMB_NADDR16
@deffnx {} BFD_RELOC_PPC_EMB_NADDR16_LO
@deffnx {} BFD_RELOC_PPC_EMB_NADDR16_HI
@deffnx {} BFD_RELOC_PPC_EMB_NADDR16_HA
@deffnx {} BFD_RELOC_PPC_EMB_SDAI16
@deffnx {} BFD_RELOC_PPC_EMB_SDA2I16
@deffnx {} BFD_RELOC_PPC_EMB_SDA2REL
@deffnx {} BFD_RELOC_PPC_EMB_SDA21
@deffnx {} BFD_RELOC_PPC_EMB_MRKREF
@deffnx {} BFD_RELOC_PPC_EMB_RELSEC16
@deffnx {} BFD_RELOC_PPC_EMB_RELST_LO
@deffnx {} BFD_RELOC_PPC_EMB_RELST_HI
@deffnx {} BFD_RELOC_PPC_EMB_RELST_HA
@deffnx {} BFD_RELOC_PPC_EMB_BIT_FLD
@deffnx {} BFD_RELOC_PPC_EMB_RELSDA
@deffnx {} BFD_RELOC_PPC64_HIGHER
@deffnx {} BFD_RELOC_PPC64_HIGHER_S
@deffnx {} BFD_RELOC_PPC64_HIGHEST
@deffnx {} BFD_RELOC_PPC64_HIGHEST_S
@deffnx {} BFD_RELOC_PPC64_TOC16_LO
@deffnx {} BFD_RELOC_PPC64_TOC16_HI
@deffnx {} BFD_RELOC_PPC64_TOC16_HA
@deffnx {} BFD_RELOC_PPC64_TOC
@deffnx {} BFD_RELOC_PPC64_PLTGOT16
@deffnx {} BFD_RELOC_PPC64_PLTGOT16_LO
@deffnx {} BFD_RELOC_PPC64_PLTGOT16_HI
@deffnx {} BFD_RELOC_PPC64_PLTGOT16_HA
@deffnx {} BFD_RELOC_PPC64_ADDR16_DS
@deffnx {} BFD_RELOC_PPC64_ADDR16_LO_DS
@deffnx {} BFD_RELOC_PPC64_GOT16_DS
@deffnx {} BFD_RELOC_PPC64_GOT16_LO_DS
@deffnx {} BFD_RELOC_PPC64_PLT16_LO_DS
@deffnx {} BFD_RELOC_PPC64_SECTOFF_DS
@deffnx {} BFD_RELOC_PPC64_SECTOFF_LO_DS
@deffnx {} BFD_RELOC_PPC64_TOC16_DS
@deffnx {} BFD_RELOC_PPC64_TOC16_LO_DS
@deffnx {} BFD_RELOC_PPC64_PLTGOT16_DS
@deffnx {} BFD_RELOC_PPC64_PLTGOT16_LO_DS
Power(rs6000) and PowerPC relocations.
@end deffn
@deffn {} BFD_RELOC_PPC_TLS
@deffnx {} BFD_RELOC_PPC_TLSGD
@deffnx {} BFD_RELOC_PPC_TLSLD
@deffnx {} BFD_RELOC_PPC_DTPMOD
@deffnx {} BFD_RELOC_PPC_TPREL16
@deffnx {} BFD_RELOC_PPC_TPREL16_LO
@deffnx {} BFD_RELOC_PPC_TPREL16_HI
@deffnx {} BFD_RELOC_PPC_TPREL16_HA
@deffnx {} BFD_RELOC_PPC_TPREL
@deffnx {} BFD_RELOC_PPC_DTPREL16
@deffnx {} BFD_RELOC_PPC_DTPREL16_LO
@deffnx {} BFD_RELOC_PPC_DTPREL16_HI
@deffnx {} BFD_RELOC_PPC_DTPREL16_HA
@deffnx {} BFD_RELOC_PPC_DTPREL
@deffnx {} BFD_RELOC_PPC_GOT_TLSGD16
@deffnx {} BFD_RELOC_PPC_GOT_TLSGD16_LO
@deffnx {} BFD_RELOC_PPC_GOT_TLSGD16_HI
@deffnx {} BFD_RELOC_PPC_GOT_TLSGD16_HA
@deffnx {} BFD_RELOC_PPC_GOT_TLSLD16
@deffnx {} BFD_RELOC_PPC_GOT_TLSLD16_LO
@deffnx {} BFD_RELOC_PPC_GOT_TLSLD16_HI
@deffnx {} BFD_RELOC_PPC_GOT_TLSLD16_HA
@deffnx {} BFD_RELOC_PPC_GOT_TPREL16
@deffnx {} BFD_RELOC_PPC_GOT_TPREL16_LO
@deffnx {} BFD_RELOC_PPC_GOT_TPREL16_HI
@deffnx {} BFD_RELOC_PPC_GOT_TPREL16_HA
@deffnx {} BFD_RELOC_PPC_GOT_DTPREL16
@deffnx {} BFD_RELOC_PPC_GOT_DTPREL16_LO
@deffnx {} BFD_RELOC_PPC_GOT_DTPREL16_HI
@deffnx {} BFD_RELOC_PPC_GOT_DTPREL16_HA
@deffnx {} BFD_RELOC_PPC64_TPREL16_DS
@deffnx {} BFD_RELOC_PPC64_TPREL16_LO_DS
@deffnx {} BFD_RELOC_PPC64_TPREL16_HIGHER
@deffnx {} BFD_RELOC_PPC64_TPREL16_HIGHERA
@deffnx {} BFD_RELOC_PPC64_TPREL16_HIGHEST
@deffnx {} BFD_RELOC_PPC64_TPREL16_HIGHESTA
@deffnx {} BFD_RELOC_PPC64_DTPREL16_DS
@deffnx {} BFD_RELOC_PPC64_DTPREL16_LO_DS
@deffnx {} BFD_RELOC_PPC64_DTPREL16_HIGHER
@deffnx {} BFD_RELOC_PPC64_DTPREL16_HIGHERA
@deffnx {} BFD_RELOC_PPC64_DTPREL16_HIGHEST
@deffnx {} BFD_RELOC_PPC64_DTPREL16_HIGHESTA
PowerPC and PowerPC64 thread-local storage relocations.
@end deffn
@deffn {} BFD_RELOC_I370_D12
IBM 370/390 relocations
@end deffn
@deffn {} BFD_RELOC_CTOR
The type of reloc used to build a constructor table - at the moment
probably a 32 bit wide absolute relocation, but the target can choose.
It generally does map to one of the other relocation types.
@end deffn
@deffn {} BFD_RELOC_ARM_PCREL_BRANCH
ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
not stored in the instruction.
@end deffn
@deffn {} BFD_RELOC_ARM_PCREL_BLX
ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
field in the instruction.
@end deffn
@deffn {} BFD_RELOC_THUMB_PCREL_BLX
Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
field in the instruction.
@end deffn
@deffn {} BFD_RELOC_ARM_PCREL_CALL
ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
@end deffn
@deffn {} BFD_RELOC_ARM_PCREL_JUMP
ARM 26-bit pc-relative branch for B or conditional BL instruction.
@end deffn
@deffn {} BFD_RELOC_THUMB_PCREL_BRANCH7
@deffnx {} BFD_RELOC_THUMB_PCREL_BRANCH9
@deffnx {} BFD_RELOC_THUMB_PCREL_BRANCH12
@deffnx {} BFD_RELOC_THUMB_PCREL_BRANCH20
@deffnx {} BFD_RELOC_THUMB_PCREL_BRANCH23
@deffnx {} BFD_RELOC_THUMB_PCREL_BRANCH25
Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
The lowest bit must be zero and is not stored in the instruction.
Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
"nn" one smaller in all cases.  Note further that BRANCH23
corresponds to R_ARM_THM_CALL.
@end deffn
@deffn {} BFD_RELOC_ARM_OFFSET_IMM
12-bit immediate offset, used in ARM-format ldr and str instructions.
@end deffn
@deffn {} BFD_RELOC_ARM_THUMB_OFFSET
5-bit immediate offset, used in Thumb-format ldr and str instructions.
@end deffn
@deffn {} BFD_RELOC_ARM_TARGET1
Pc-relative or absolute relocation depending on target.  Used for
entries in .init_array sections.
@end deffn
@deffn {} BFD_RELOC_ARM_ROSEGREL32
Read-only segment base relative address.
@end deffn
@deffn {} BFD_RELOC_ARM_SBREL32
Data segment base relative address.
@end deffn
@deffn {} BFD_RELOC_ARM_TARGET2
This reloc is used for references to RTTI data from exception handling
tables.  The actual definition depends on the target.  It may be a
pc-relative or some form of GOT-indirect relocation.
@end deffn
@deffn {} BFD_RELOC_ARM_PREL31
31-bit PC relative address.
@end deffn
@deffn {} BFD_RELOC_ARM_MOVW
@deffnx {} BFD_RELOC_ARM_MOVT
@deffnx {} BFD_RELOC_ARM_MOVW_PCREL
@deffnx {} BFD_RELOC_ARM_MOVT_PCREL
@deffnx {} BFD_RELOC_ARM_THUMB_MOVW
@deffnx {} BFD_RELOC_ARM_THUMB_MOVT
@deffnx {} BFD_RELOC_ARM_THUMB_MOVW_PCREL
@deffnx {} BFD_RELOC_ARM_THUMB_MOVT_PCREL
Low and High halfword relocations for MOVW and MOVT instructions.
@end deffn
@deffn {} BFD_RELOC_ARM_JUMP_SLOT
@deffnx {} BFD_RELOC_ARM_GLOB_DAT
@deffnx {} BFD_RELOC_ARM_GOT32
@deffnx {} BFD_RELOC_ARM_PLT32
@deffnx {} BFD_RELOC_ARM_RELATIVE
@deffnx {} BFD_RELOC_ARM_GOTOFF
@deffnx {} BFD_RELOC_ARM_GOTPC
Relocations for setting up GOTs and PLTs for shared libraries.
@end deffn
@deffn {} BFD_RELOC_ARM_TLS_GD32
@deffnx {} BFD_RELOC_ARM_TLS_LDO32
@deffnx {} BFD_RELOC_ARM_TLS_LDM32
@deffnx {} BFD_RELOC_ARM_TLS_DTPOFF32
@deffnx {} BFD_RELOC_ARM_TLS_DTPMOD32
@deffnx {} BFD_RELOC_ARM_TLS_TPOFF32
@deffnx {} BFD_RELOC_ARM_TLS_IE32
@deffnx {} BFD_RELOC_ARM_TLS_LE32
ARM thread-local storage relocations.
@end deffn
@deffn {} BFD_RELOC_ARM_ALU_PC_G0_NC
@deffnx {} BFD_RELOC_ARM_ALU_PC_G0
@deffnx {} BFD_RELOC_ARM_ALU_PC_G1_NC
@deffnx {} BFD_RELOC_ARM_ALU_PC_G1
@deffnx {} BFD_RELOC_ARM_ALU_PC_G2
@deffnx {} BFD_RELOC_ARM_LDR_PC_G0
@deffnx {} BFD_RELOC_ARM_LDR_PC_G1
@deffnx {} BFD_RELOC_ARM_LDR_PC_G2
@deffnx {} BFD_RELOC_ARM_LDRS_PC_G0
@deffnx {} BFD_RELOC_ARM_LDRS_PC_G1
@deffnx {} BFD_RELOC_ARM_LDRS_PC_G2
@deffnx {} BFD_RELOC_ARM_LDC_PC_G0
@deffnx {} BFD_RELOC_ARM_LDC_PC_G1
@deffnx {} BFD_RELOC_ARM_LDC_PC_G2
@deffnx {} BFD_RELOC_ARM_ALU_SB_G0_NC
@deffnx {} BFD_RELOC_ARM_ALU_SB_G0
@deffnx {} BFD_RELOC_ARM_ALU_SB_G1_NC
@deffnx {} BFD_RELOC_ARM_ALU_SB_G1
@deffnx {} BFD_RELOC_ARM_ALU_SB_G2
@deffnx {} BFD_RELOC_ARM_LDR_SB_G0
@deffnx {} BFD_RELOC_ARM_LDR_SB_G1
@deffnx {} BFD_RELOC_ARM_LDR_SB_G2
@deffnx {} BFD_RELOC_ARM_LDRS_SB_G0
@deffnx {} BFD_RELOC_ARM_LDRS_SB_G1
@deffnx {} BFD_RELOC_ARM_LDRS_SB_G2
@deffnx {} BFD_RELOC_ARM_LDC_SB_G0
@deffnx {} BFD_RELOC_ARM_LDC_SB_G1
@deffnx {} BFD_RELOC_ARM_LDC_SB_G2
ARM group relocations.
@end deffn
@deffn {} BFD_RELOC_ARM_V4BX
Annotation of BX instructions.
@end deffn
@deffn {} BFD_RELOC_ARM_IMMEDIATE
@deffnx {} BFD_RELOC_ARM_ADRL_IMMEDIATE
@deffnx {} BFD_RELOC_ARM_T32_IMMEDIATE
@deffnx {} BFD_RELOC_ARM_T32_ADD_IMM
@deffnx {} BFD_RELOC_ARM_T32_IMM12
@deffnx {} BFD_RELOC_ARM_T32_ADD_PC12
@deffnx {} BFD_RELOC_ARM_SHIFT_IMM
@deffnx {} BFD_RELOC_ARM_SMC
@deffnx {} BFD_RELOC_ARM_SWI
@deffnx {} BFD_RELOC_ARM_MULTI
@deffnx {} BFD_RELOC_ARM_CP_OFF_IMM
@deffnx {} BFD_RELOC_ARM_CP_OFF_IMM_S2
@deffnx {} BFD_RELOC_ARM_T32_CP_OFF_IMM
@deffnx {} BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
@deffnx {} BFD_RELOC_ARM_ADR_IMM
@deffnx {} BFD_RELOC_ARM_LDR_IMM
@deffnx {} BFD_RELOC_ARM_LITERAL
@deffnx {} BFD_RELOC_ARM_IN_POOL
@deffnx {} BFD_RELOC_ARM_OFFSET_IMM8
@deffnx {} BFD_RELOC_ARM_T32_OFFSET_U8
@deffnx {} BFD_RELOC_ARM_T32_OFFSET_IMM
@deffnx {} BFD_RELOC_ARM_HWLITERAL
@deffnx {} BFD_RELOC_ARM_THUMB_ADD
@deffnx {} BFD_RELOC_ARM_THUMB_IMM
@deffnx {} BFD_RELOC_ARM_THUMB_SHIFT
These relocs are only used within the ARM assembler.  They are not
(at present) written to any object files.
@end deffn
@deffn {} BFD_RELOC_SH_PCDISP8BY2
@deffnx {} BFD_RELOC_SH_PCDISP12BY2
@deffnx {} BFD_RELOC_SH_IMM3
@deffnx {} BFD_RELOC_SH_IMM3U
@deffnx {} BFD_RELOC_SH_DISP12
@deffnx {} BFD_RELOC_SH_DISP12BY2
@deffnx {} BFD_RELOC_SH_DISP12BY4
@deffnx {} BFD_RELOC_SH_DISP12BY8
@deffnx {} BFD_RELOC_SH_DISP20
@deffnx {} BFD_RELOC_SH_DISP20BY8
@deffnx {} BFD_RELOC_SH_IMM4
@deffnx {} BFD_RELOC_SH_IMM4BY2
@deffnx {} BFD_RELOC_SH_IMM4BY4
@deffnx {} BFD_RELOC_SH_IMM8
@deffnx {} BFD_RELOC_SH_IMM8BY2
@deffnx {} BFD_RELOC_SH_IMM8BY4
@deffnx {} BFD_RELOC_SH_PCRELIMM8BY2
@deffnx {} BFD_RELOC_SH_PCRELIMM8BY4
@deffnx {} BFD_RELOC_SH_SWITCH16
@deffnx {} BFD_RELOC_SH_SWITCH32
@deffnx {} BFD_RELOC_SH_USES
@deffnx {} BFD_RELOC_SH_COUNT
@deffnx {} BFD_RELOC_SH_ALIGN
@deffnx {} BFD_RELOC_SH_CODE
@deffnx {} BFD_RELOC_SH_DATA
@deffnx {} BFD_RELOC_SH_LABEL
@deffnx {} BFD_RELOC_SH_LOOP_START
@deffnx {} BFD_RELOC_SH_LOOP_END
@deffnx {} BFD_RELOC_SH_COPY
@deffnx {} BFD_RELOC_SH_GLOB_DAT
@deffnx {} BFD_RELOC_SH_JMP_SLOT
@deffnx {} BFD_RELOC_SH_RELATIVE
@deffnx {} BFD_RELOC_SH_GOTPC
@deffnx {} BFD_RELOC_SH_GOT_LOW16
@deffnx {} BFD_RELOC_SH_GOT_MEDLOW16
@deffnx {} BFD_RELOC_SH_GOT_MEDHI16
@deffnx {} BFD_RELOC_SH_GOT_HI16
@deffnx {} BFD_RELOC_SH_GOTPLT_LOW16
@deffnx {} BFD_RELOC_SH_GOTPLT_MEDLOW16
@deffnx {} BFD_RELOC_SH_GOTPLT_MEDHI16
@deffnx {} BFD_RELOC_SH_GOTPLT_HI16
@deffnx {} BFD_RELOC_SH_PLT_LOW16
@deffnx {} BFD_RELOC_SH_PLT_MEDLOW16
@deffnx {} BFD_RELOC_SH_PLT_MEDHI16
@deffnx {} BFD_RELOC_SH_PLT_HI16
@deffnx {} BFD_RELOC_SH_GOTOFF_LOW16
@deffnx {} BFD_RELOC_SH_GOTOFF_MEDLOW16
@deffnx {} BFD_RELOC_SH_GOTOFF_MEDHI16
@deffnx {} BFD_RELOC_SH_GOTOFF_HI16
@deffnx {} BFD_RELOC_SH_GOTPC_LOW16
@deffnx {} BFD_RELOC_SH_GOTPC_MEDLOW16
@deffnx {} BFD_RELOC_SH_GOTPC_MEDHI16
@deffnx {} BFD_RELOC_SH_GOTPC_HI16
@deffnx {} BFD_RELOC_SH_COPY64
@deffnx {} BFD_RELOC_SH_GLOB_DAT64
@deffnx {} BFD_RELOC_SH_JMP_SLOT64
@deffnx {} BFD_RELOC_SH_RELATIVE64
@deffnx {} BFD_RELOC_SH_GOT10BY4
@deffnx {} BFD_RELOC_SH_GOT10BY8
@deffnx {} BFD_RELOC_SH_GOTPLT10BY4
@deffnx {} BFD_RELOC_SH_GOTPLT10BY8
@deffnx {} BFD_RELOC_SH_GOTPLT32
@deffnx {} BFD_RELOC_SH_SHMEDIA_CODE
@deffnx {} BFD_RELOC_SH_IMMU5
@deffnx {} BFD_RELOC_SH_IMMS6
@deffnx {} BFD_RELOC_SH_IMMS6BY32
@deffnx {} BFD_RELOC_SH_IMMU6
@deffnx {} BFD_RELOC_SH_IMMS10
@deffnx {} BFD_RELOC_SH_IMMS10BY2
@deffnx {} BFD_RELOC_SH_IMMS10BY4
@deffnx {} BFD_RELOC_SH_IMMS10BY8
@deffnx {} BFD_RELOC_SH_IMMS16
@deffnx {} BFD_RELOC_SH_IMMU16
@deffnx {} BFD_RELOC_SH_IMM_LOW16
@deffnx {} BFD_RELOC_SH_IMM_LOW16_PCREL
@deffnx {} BFD_RELOC_SH_IMM_MEDLOW16
@deffnx {} BFD_RELOC_SH_IMM_MEDLOW16_PCREL
@deffnx {} BFD_RELOC_SH_IMM_MEDHI16
@deffnx {} BFD_RELOC_SH_IMM_MEDHI16_PCREL
@deffnx {} BFD_RELOC_SH_IMM_HI16
@deffnx {} BFD_RELOC_SH_IMM_HI16_PCREL
@deffnx {} BFD_RELOC_SH_PT_16
@deffnx {} BFD_RELOC_SH_TLS_GD_32
@deffnx {} BFD_RELOC_SH_TLS_LD_32
@deffnx {} BFD_RELOC_SH_TLS_LDO_32
@deffnx {} BFD_RELOC_SH_TLS_IE_32
@deffnx {} BFD_RELOC_SH_TLS_LE_32
@deffnx {} BFD_RELOC_SH_TLS_DTPMOD32
@deffnx {} BFD_RELOC_SH_TLS_DTPOFF32
@deffnx {} BFD_RELOC_SH_TLS_TPOFF32
Renesas / SuperH SH relocs.  Not all of these appear in object files.
@end deffn
@deffn {} BFD_RELOC_ARC_B22_PCREL
ARC Cores relocs.
ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
not stored in the instruction.  The high 20 bits are installed in bits 26
through 7 of the instruction.
@end deffn
@deffn {} BFD_RELOC_ARC_B26
ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
stored in the instruction.  The high 24 bits are installed in bits 23
through 0.
@end deffn
@deffn {} BFD_RELOC_BFIN_16_IMM
ADI Blackfin 16 bit immediate absolute reloc.
@end deffn
@deffn {} BFD_RELOC_BFIN_16_HIGH
ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
@end deffn
@deffn {} BFD_RELOC_BFIN_4_PCREL
ADI Blackfin 'a' part of LSETUP.
@end deffn
@deffn {} BFD_RELOC_BFIN_5_PCREL
ADI Blackfin.
@end deffn
@deffn {} BFD_RELOC_BFIN_16_LOW
ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
@end deffn
@deffn {} BFD_RELOC_BFIN_10_PCREL
ADI Blackfin.
@end deffn
@deffn {} BFD_RELOC_BFIN_11_PCREL
ADI Blackfin 'b' part of LSETUP.
@end deffn
@deffn {} BFD_RELOC_BFIN_12_PCREL_JUMP
ADI Blackfin.
@end deffn
@deffn {} BFD_RELOC_BFIN_12_PCREL_JUMP_S
ADI Blackfin Short jump, pcrel.
@end deffn
@deffn {} BFD_RELOC_BFIN_24_PCREL_CALL_X
ADI Blackfin Call.x not implemented.
@end deffn
@deffn {} BFD_RELOC_BFIN_24_PCREL_JUMP_L
ADI Blackfin Long Jump pcrel.
@end deffn
@deffn {} BFD_RELOC_BFIN_GOT17M4
@deffnx {} BFD_RELOC_BFIN_GOTHI
@deffnx {} BFD_RELOC_BFIN_GOTLO
@deffnx {} BFD_RELOC_BFIN_FUNCDESC
@deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOT17M4
@deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOTHI
@deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOTLO
@deffnx {} BFD_RELOC_BFIN_FUNCDESC_VALUE
@deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
@deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
@deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
@deffnx {} BFD_RELOC_BFIN_GOTOFF17M4
@deffnx {} BFD_RELOC_BFIN_GOTOFFHI
@deffnx {} BFD_RELOC_BFIN_GOTOFFLO
ADI Blackfin FD-PIC relocations.
@end deffn
@deffn {} BFD_RELOC_BFIN_GOT
ADI Blackfin GOT relocation.
@end deffn
@deffn {} BFD_RELOC_BFIN_PLTPC
ADI Blackfin PLTPC relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_PUSH
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_CONST
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_ADD
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_SUB
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_MULT
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_DIV
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_MOD
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_LSHIFT
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_RSHIFT
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_AND
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_OR
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_XOR
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_LAND
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_LOR
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_LEN
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_NEG
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_COMP
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_PAGE
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_HWPAGE
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_ARELOC_BFIN_ADDR
ADI Blackfin arithmetic relocation.
@end deffn
@deffn {} BFD_RELOC_D10V_10_PCREL_R
Mitsubishi D10V relocs.
This is a 10-bit reloc with the right 2 bits
assumed to be 0.
@end deffn
@deffn {} BFD_RELOC_D10V_10_PCREL_L
Mitsubishi D10V relocs.
This is a 10-bit reloc with the right 2 bits
assumed to be 0.  This is the same as the previous reloc
except it is in the left container, i.e.,
shifted left 15 bits.
@end deffn
@deffn {} BFD_RELOC_D10V_18
This is an 18-bit reloc with the right 2 bits
assumed to be 0.
@end deffn
@deffn {} BFD_RELOC_D10V_18_PCREL
This is an 18-bit reloc with the right 2 bits
assumed to be 0.
@end deffn
@deffn {} BFD_RELOC_D30V_6
Mitsubishi D30V relocs.
This is a 6-bit absolute reloc.
@end deffn
@deffn {} BFD_RELOC_D30V_9_PCREL
This is a 6-bit pc-relative reloc with
the right 3 bits assumed to be 0.
@end deffn
@deffn {} BFD_RELOC_D30V_9_PCREL_R
This is a 6-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
of the container.
@end deffn
@deffn {} BFD_RELOC_D30V_15
This is a 12-bit absolute reloc with the
right 3 bitsassumed to be 0.
@end deffn
@deffn {} BFD_RELOC_D30V_15_PCREL
This is a 12-bit pc-relative reloc with
the right 3 bits assumed to be 0.
@end deffn
@deffn {} BFD_RELOC_D30V_15_PCREL_R
This is a 12-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
of the container.
@end deffn
@deffn {} BFD_RELOC_D30V_21
This is an 18-bit absolute reloc with
the right 3 bits assumed to be 0.
@end deffn
@deffn {} BFD_RELOC_D30V_21_PCREL
This is an 18-bit pc-relative reloc with
the right 3 bits assumed to be 0.
@end deffn
@deffn {} BFD_RELOC_D30V_21_PCREL_R
This is an 18-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
of the container.
@end deffn
@deffn {} BFD_RELOC_D30V_32
This is a 32-bit absolute reloc.
@end deffn
@deffn {} BFD_RELOC_D30V_32_PCREL
This is a 32-bit pc-relative reloc.
@end deffn
@deffn {} BFD_RELOC_DLX_HI16_S
DLX relocs
@end deffn
@deffn {} BFD_RELOC_DLX_LO16
DLX relocs
@end deffn
@deffn {} BFD_RELOC_DLX_JMP26
DLX relocs
@end deffn
@deffn {} BFD_RELOC_M32C_HI8
@deffnx {} BFD_RELOC_M32C_RL_JUMP
@deffnx {} BFD_RELOC_M32C_RL_1ADDR
@deffnx {} BFD_RELOC_M32C_RL_2ADDR
Renesas M16C/M32C Relocations.
@end deffn
@deffn {} BFD_RELOC_M32R_24
Renesas M32R (formerly Mitsubishi M32R) relocs.
This is a 24 bit absolute address.
@end deffn
@deffn {} BFD_RELOC_M32R_10_PCREL
This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
@end deffn
@deffn {} BFD_RELOC_M32R_18_PCREL
This is an 18-bit reloc with the right 2 bits assumed to be 0.
@end deffn
@deffn {} BFD_RELOC_M32R_26_PCREL
This is a 26-bit reloc with the right 2 bits assumed to be 0.
@end deffn
@deffn {} BFD_RELOC_M32R_HI16_ULO
This is a 16-bit reloc containing the high 16 bits of an address
used when the lower 16 bits are treated as unsigned.
@end deffn
@deffn {} BFD_RELOC_M32R_HI16_SLO
This is a 16-bit reloc containing the high 16 bits of an address
used when the lower 16 bits are treated as signed.
@end deffn
@deffn {} BFD_RELOC_M32R_LO16
This is a 16-bit reloc containing the lower 16 bits of an address.
@end deffn
@deffn {} BFD_RELOC_M32R_SDA16
This is a 16-bit reloc containing the small data area offset for use in
add3, load, and store instructions.
@end deffn
@deffn {} BFD_RELOC_M32R_GOT24
@deffnx {} BFD_RELOC_M32R_26_PLTREL
@deffnx {} BFD_RELOC_M32R_COPY
@deffnx {} BFD_RELOC_M32R_GLOB_DAT
@deffnx {} BFD_RELOC_M32R_JMP_SLOT
@deffnx {} BFD_RELOC_M32R_RELATIVE
@deffnx {} BFD_RELOC_M32R_GOTOFF
@deffnx {} BFD_RELOC_M32R_GOTOFF_HI_ULO
@deffnx {} BFD_RELOC_M32R_GOTOFF_HI_SLO
@deffnx {} BFD_RELOC_M32R_GOTOFF_LO
@deffnx {} BFD_RELOC_M32R_GOTPC24
@deffnx {} BFD_RELOC_M32R_GOT16_HI_ULO
@deffnx {} BFD_RELOC_M32R_GOT16_HI_SLO
@deffnx {} BFD_RELOC_M32R_GOT16_LO
@deffnx {} BFD_RELOC_M32R_GOTPC_HI_ULO
@deffnx {} BFD_RELOC_M32R_GOTPC_HI_SLO
@deffnx {} BFD_RELOC_M32R_GOTPC_LO
For PIC.
@end deffn
@deffn {} BFD_RELOC_V850_9_PCREL
This is a 9-bit reloc
@end deffn
@deffn {} BFD_RELOC_V850_22_PCREL
This is a 22-bit reloc
@end deffn
@deffn {} BFD_RELOC_V850_SDA_16_16_OFFSET
This is a 16 bit offset from the short data area pointer.
@end deffn
@deffn {} BFD_RELOC_V850_SDA_15_16_OFFSET
This is a 16 bit offset (of which only 15 bits are used) from the
short data area pointer.
@end deffn
@deffn {} BFD_RELOC_V850_ZDA_16_16_OFFSET
This is a 16 bit offset from the zero data area pointer.
@end deffn
@deffn {} BFD_RELOC_V850_ZDA_15_16_OFFSET
This is a 16 bit offset (of which only 15 bits are used) from the
zero data area pointer.
@end deffn
@deffn {} BFD_RELOC_V850_TDA_6_8_OFFSET
This is an 8 bit offset (of which only 6 bits are used) from the
tiny data area pointer.
@end deffn
@deffn {} BFD_RELOC_V850_TDA_7_8_OFFSET
This is an 8bit offset (of which only 7 bits are used) from the tiny
data area pointer.
@end deffn
@deffn {} BFD_RELOC_V850_TDA_7_7_OFFSET
This is a 7 bit offset from the tiny data area pointer.
@end deffn
@deffn {} BFD_RELOC_V850_TDA_16_16_OFFSET
This is a 16 bit offset from the tiny data area pointer.
@end deffn
@deffn {} BFD_RELOC_V850_TDA_4_5_OFFSET
This is a 5 bit offset (of which only 4 bits are used) from the tiny
data area pointer.
@end deffn
@deffn {} BFD_RELOC_V850_TDA_4_4_OFFSET
This is a 4 bit offset from the tiny data area pointer.
@end deffn
@deffn {} BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
This is a 16 bit offset from the short data area pointer, with the
bits placed non-contiguously in the instruction.
@end deffn
@deffn {} BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
This is a 16 bit offset from the zero data area pointer, with the
bits placed non-contiguously in the instruction.
@end deffn
@deffn {} BFD_RELOC_V850_CALLT_6_7_OFFSET
This is a 6 bit offset from the call table base pointer.
@end deffn
@deffn {} BFD_RELOC_V850_CALLT_16_16_OFFSET
This is a 16 bit offset from the call table base pointer.
@end deffn
@deffn {} BFD_RELOC_V850_LONGCALL
Used for relaxing indirect function calls.
@end deffn
@deffn {} BFD_RELOC_V850_LONGJUMP
Used for relaxing indirect jumps.
@end deffn
@deffn {} BFD_RELOC_V850_ALIGN
Used to maintain alignment whilst relaxing.
@end deffn
@deffn {} BFD_RELOC_V850_LO16_SPLIT_OFFSET
This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
instructions.
@end deffn
@deffn {} BFD_RELOC_MN10300_32_PCREL
This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
instruction.
@end deffn
@deffn {} BFD_RELOC_MN10300_16_PCREL
This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
instruction.
@end deffn
@deffn {} BFD_RELOC_TIC30_LDP
This is a 8bit DP reloc for the tms320c30, where the most
significant 8 bits of a 24 bit word are placed into the least
significant 8 bits of the opcode.
@end deffn
@deffn {} BFD_RELOC_TIC54X_PARTLS7
This is a 7bit reloc for the tms320c54x, where the least
significant 7 bits of a 16 bit word are placed into the least
significant 7 bits of the opcode.
@end deffn
@deffn {} BFD_RELOC_TIC54X_PARTMS9
This is a 9bit DP reloc for the tms320c54x, where the most
significant 9 bits of a 16 bit word are placed into the least
significant 9 bits of the opcode.
@end deffn
@deffn {} BFD_RELOC_TIC54X_23
This is an extended address 23-bit reloc for the tms320c54x.
@end deffn
@deffn {} BFD_RELOC_TIC54X_16_OF_23
This is a 16-bit reloc for the tms320c54x, where the least
significant 16 bits of a 23-bit extended address are placed into
the opcode.
@end deffn
@deffn {} BFD_RELOC_TIC54X_MS7_OF_23
This is a reloc for the tms320c54x, where the most
significant 7 bits of a 23-bit extended address are placed into
the opcode.
@end deffn
@deffn {} BFD_RELOC_FR30_48
This is a 48 bit reloc for the FR30 that stores 32 bits.
@end deffn
@deffn {} BFD_RELOC_FR30_20
This is a 32 bit reloc for the FR30 that stores 20 bits split up into
two sections.
@end deffn
@deffn {} BFD_RELOC_FR30_6_IN_4
This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4 bits.
@end deffn
@deffn {} BFD_RELOC_FR30_8_IN_8
This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
into 8 bits.
@end deffn
@deffn {} BFD_RELOC_FR30_9_IN_8
This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
into 8 bits.
@end deffn
@deffn {} BFD_RELOC_FR30_10_IN_8
This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
into 8 bits.
@end deffn
@deffn {} BFD_RELOC_FR30_9_PCREL
This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
short offset into 8 bits.
@end deffn
@deffn {} BFD_RELOC_FR30_12_PCREL
This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
short offset into 11 bits.
@end deffn
@deffn {} BFD_RELOC_MCORE_PCREL_IMM8BY4
@deffnx {} BFD_RELOC_MCORE_PCREL_IMM11BY2
@deffnx {} BFD_RELOC_MCORE_PCREL_IMM4BY2
@deffnx {} BFD_RELOC_MCORE_PCREL_32
@deffnx {} BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
@deffnx {} BFD_RELOC_MCORE_RVA
Motorola Mcore relocations.
@end deffn
@deffn {} BFD_RELOC_MEP_8
@deffnx {} BFD_RELOC_MEP_16
@deffnx {} BFD_RELOC_MEP_32
@deffnx {} BFD_RELOC_MEP_PCREL8A2
@deffnx {} BFD_RELOC_MEP_PCREL12A2
@deffnx {} BFD_RELOC_MEP_PCREL17A2
@deffnx {} BFD_RELOC_MEP_PCREL24A2
@deffnx {} BFD_RELOC_MEP_PCABS24A2
@deffnx {} BFD_RELOC_MEP_LOW16
@deffnx {} BFD_RELOC_MEP_HI16U
@deffnx {} BFD_RELOC_MEP_HI16S
@deffnx {} BFD_RELOC_MEP_GPREL
@deffnx {} BFD_RELOC_MEP_TPREL
@deffnx {} BFD_RELOC_MEP_TPREL7
@deffnx {} BFD_RELOC_MEP_TPREL7A2
@deffnx {} BFD_RELOC_MEP_TPREL7A4
@deffnx {} BFD_RELOC_MEP_UIMM24
@deffnx {} BFD_RELOC_MEP_ADDR24A4
@deffnx {} BFD_RELOC_MEP_GNU_VTINHERIT
@deffnx {} BFD_RELOC_MEP_GNU_VTENTRY
Toshiba Media Processor Relocations.
@end deffn
@deffn {} BFD_RELOC_MMIX_GETA
@deffnx {} BFD_RELOC_MMIX_GETA_1
@deffnx {} BFD_RELOC_MMIX_GETA_2
@deffnx {} BFD_RELOC_MMIX_GETA_3
These are relocations for the GETA instruction.
@end deffn
@deffn {} BFD_RELOC_MMIX_CBRANCH
@deffnx {} BFD_RELOC_MMIX_CBRANCH_J
@deffnx {} BFD_RELOC_MMIX_CBRANCH_1
@deffnx {} BFD_RELOC_MMIX_CBRANCH_2
@deffnx {} BFD_RELOC_MMIX_CBRANCH_3
These are relocations for a conditional branch instruction.
@end deffn
@deffn {} BFD_RELOC_MMIX_PUSHJ
@deffnx {} BFD_RELOC_MMIX_PUSHJ_1
@deffnx {} BFD_RELOC_MMIX_PUSHJ_2
@deffnx {} BFD_RELOC_MMIX_PUSHJ_3
@deffnx {} BFD_RELOC_MMIX_PUSHJ_STUBBABLE
These are relocations for the PUSHJ instruction.
@end deffn
@deffn {} BFD_RELOC_MMIX_JMP
@deffnx {} BFD_RELOC_MMIX_JMP_1
@deffnx {} BFD_RELOC_MMIX_JMP_2
@deffnx {} BFD_RELOC_MMIX_JMP_3
These are relocations for the JMP instruction.
@end deffn
@deffn {} BFD_RELOC_MMIX_ADDR19
This is a relocation for a relative address as in a GETA instruction or
a branch.
@end deffn
@deffn {} BFD_RELOC_MMIX_ADDR27
This is a relocation for a relative address as in a JMP instruction.
@end deffn
@deffn {} BFD_RELOC_MMIX_REG_OR_BYTE
This is a relocation for an instruction field that may be a general
register or a value 0..255.
@end deffn
@deffn {} BFD_RELOC_MMIX_REG
This is a relocation for an instruction field that may be a general
register.
@end deffn
@deffn {} BFD_RELOC_MMIX_BASE_PLUS_OFFSET
This is a relocation for two instruction fields holding a register and
an offset, the equivalent of the relocation.
@end deffn
@deffn {} BFD_RELOC_MMIX_LOCAL
This relocation is an assertion that the expression is not allocated as
a global register.  It does not modify contents.
@end deffn
@deffn {} BFD_RELOC_AVR_7_PCREL
This is a 16 bit reloc for the AVR that stores 8 bit pc relative
short offset into 7 bits.
@end deffn
@deffn {} BFD_RELOC_AVR_13_PCREL
This is a 16 bit reloc for the AVR that stores 13 bit pc relative
short offset into 12 bits.
@end deffn
@deffn {} BFD_RELOC_AVR_16_PM
This is a 16 bit reloc for the AVR that stores 17 bit value (usually
program memory address) into 16 bits.
@end deffn
@deffn {} BFD_RELOC_AVR_LO8_LDI
This is a 16 bit reloc for the AVR that stores 8 bit value (usually
data memory address) into 8 bit immediate value of LDI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_HI8_LDI
This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
of data memory address) into 8 bit immediate value of LDI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_HH8_LDI
This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
of program memory address) into 8 bit immediate value of LDI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_MS8_LDI
This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
of 32 bit value) into 8 bit immediate value of LDI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_LO8_LDI_NEG
This is a 16 bit reloc for the AVR that stores negated 8 bit value
(usually data memory address) into 8 bit immediate value of SUBI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_HI8_LDI_NEG
This is a 16 bit reloc for the AVR that stores negated 8 bit value
(high 8 bit of data memory address) into 8 bit immediate value of
SUBI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_HH8_LDI_NEG
This is a 16 bit reloc for the AVR that stores negated 8 bit value
(most high 8 bit of program memory address) into 8 bit immediate value
of LDI or SUBI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_MS8_LDI_NEG
This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
of 32 bit value) into 8 bit immediate value of LDI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_LO8_LDI_PM
This is a 16 bit reloc for the AVR that stores 8 bit value (usually
command address) into 8 bit immediate value of LDI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_LO8_LDI_GS
This is a 16 bit reloc for the AVR that stores 8 bit value 
(command address) into 8 bit immediate value of LDI insn. If the address
is beyond the 128k boundary, the linker inserts a jump stub for this reloc
in the lower 128k.
@end deffn
@deffn {} BFD_RELOC_AVR_HI8_LDI_PM
This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
of command address) into 8 bit immediate value of LDI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_HI8_LDI_GS
This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
of command address) into 8 bit immediate value of LDI insn.  If the address
is beyond the 128k boundary, the linker inserts a jump stub for this reloc
below 128k.
@end deffn
@deffn {} BFD_RELOC_AVR_HH8_LDI_PM
This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
of command address) into 8 bit immediate value of LDI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_LO8_LDI_PM_NEG
This is a 16 bit reloc for the AVR that stores negated 8 bit value
(usually command address) into 8 bit immediate value of SUBI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_HI8_LDI_PM_NEG
This is a 16 bit reloc for the AVR that stores negated 8 bit value
(high 8 bit of 16 bit command address) into 8 bit immediate value
of SUBI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_HH8_LDI_PM_NEG
This is a 16 bit reloc for the AVR that stores negated 8 bit value
(high 6 bit of 22 bit command address) into 8 bit immediate
value of SUBI insn.
@end deffn
@deffn {} BFD_RELOC_AVR_CALL
This is a 32 bit reloc for the AVR that stores 23 bit value
into 22 bits.
@end deffn
@deffn {} BFD_RELOC_AVR_LDI
This is a 16 bit reloc for the AVR that stores all needed bits
for absolute addressing with ldi with overflow check to linktime
@end deffn
@deffn {} BFD_RELOC_AVR_6
This is a 6 bit reloc for the AVR that stores offset for ldd/std
instructions
@end deffn
@deffn {} BFD_RELOC_AVR_6_ADIW
This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
instructions
@end deffn
@deffn {} BFD_RELOC_390_12
Direct 12 bit.
@end deffn
@deffn {} BFD_RELOC_390_GOT12
12 bit GOT offset.
@end deffn
@deffn {} BFD_RELOC_390_PLT32
32 bit PC relative PLT address.
@end deffn
@deffn {} BFD_RELOC_390_COPY
Copy symbol at runtime.
@end deffn
@deffn {} BFD_RELOC_390_GLOB_DAT
Create GOT entry.
@end deffn
@deffn {} BFD_RELOC_390_JMP_SLOT
Create PLT entry.
@end deffn
@deffn {} BFD_RELOC_390_RELATIVE
Adjust by program base.
@end deffn
@deffn {} BFD_RELOC_390_GOTPC
32 bit PC relative offset to GOT.
@end deffn
@deffn {} BFD_RELOC_390_GOT16
16 bit GOT offset.
@end deffn
@deffn {} BFD_RELOC_390_PC16DBL
PC relative 16 bit shifted by 1.
@end deffn
@deffn {} BFD_RELOC_390_PLT16DBL
16 bit PC rel. PLT shifted by 1.
@end deffn
@deffn {} BFD_RELOC_390_PC32DBL
PC relative 32 bit shifted by 1.
@end deffn
@deffn {} BFD_RELOC_390_PLT32DBL
32 bit PC rel. PLT shifted by 1.
@end deffn
@deffn {} BFD_RELOC_390_GOTPCDBL
32 bit PC rel. GOT shifted by 1.
@end deffn
@deffn {} BFD_RELOC_390_GOT64
64 bit GOT offset.
@end deffn
@deffn {} BFD_RELOC_390_PLT64
64 bit PC relative PLT address.
@end deffn
@deffn {} BFD_RELOC_390_GOTENT
32 bit rel. offset to GOT entry.
@end deffn
@deffn {} BFD_RELOC_390_GOTOFF64
64 bit offset to GOT.
@end deffn
@deffn {} BFD_RELOC_390_GOTPLT12
12-bit offset to symbol-entry within GOT, with PLT handling.
@end deffn
@deffn {} BFD_RELOC_390_GOTPLT16
16-bit offset to symbol-entry within GOT, with PLT handling.
@end deffn
@deffn {} BFD_RELOC_390_GOTPLT32
32-bit offset to symbol-entry within GOT, with PLT handling.
@end deffn
@deffn {} BFD_RELOC_390_GOTPLT64
64-bit offset to symbol-entry within GOT, with PLT handling.
@end deffn
@deffn {} BFD_RELOC_390_GOTPLTENT
32-bit rel. offset to symbol-entry within GOT, with PLT handling.
@end deffn
@deffn {} BFD_RELOC_390_PLTOFF16
16-bit rel. offset from the GOT to a PLT entry.
@end deffn
@deffn {} BFD_RELOC_390_PLTOFF32
32-bit rel. offset from the GOT to a PLT entry.
@end deffn
@deffn {} BFD_RELOC_390_PLTOFF64
64-bit rel. offset from the GOT to a PLT entry.
@end deffn
@deffn {} BFD_RELOC_390_TLS_LOAD
@deffnx {} BFD_RELOC_390_TLS_GDCALL
@deffnx {} BFD_RELOC_390_TLS_LDCALL
@deffnx {} BFD_RELOC_390_TLS_GD32
@deffnx {} BFD_RELOC_390_TLS_GD64
@deffnx {} BFD_RELOC_390_TLS_GOTIE12
@deffnx {} BFD_RELOC_390_TLS_GOTIE32
@deffnx {} BFD_RELOC_390_TLS_GOTIE64
@deffnx {} BFD_RELOC_390_TLS_LDM32
@deffnx {} BFD_RELOC_390_TLS_LDM64
@deffnx {} BFD_RELOC_390_TLS_IE32
@deffnx {} BFD_RELOC_390_TLS_IE64
@deffnx {} BFD_RELOC_390_TLS_IEENT
@deffnx {} BFD_RELOC_390_TLS_LE32
@deffnx {} BFD_RELOC_390_TLS_LE64
@deffnx {} BFD_RELOC_390_TLS_LDO32
@deffnx {} BFD_RELOC_390_TLS_LDO64
@deffnx {} BFD_RELOC_390_TLS_DTPMOD
@deffnx {} BFD_RELOC_390_TLS_DTPOFF
@deffnx {} BFD_RELOC_390_TLS_TPOFF
s390 tls relocations.
@end deffn
@deffn {} BFD_RELOC_390_20
@deffnx {} BFD_RELOC_390_GOT20
@deffnx {} BFD_RELOC_390_GOTPLT20
@deffnx {} BFD_RELOC_390_TLS_GOTIE20
Long displacement extension.
@end deffn
@deffn {} BFD_RELOC_SCORE_GPREL15
Score relocations
Low 16 bit for load/store
@end deffn
@deffn {} BFD_RELOC_SCORE_DUMMY2
@deffnx {} BFD_RELOC_SCORE_JMP
This is a 24-bit reloc with the right 1 bit assumed to be 0
@end deffn
@deffn {} BFD_RELOC_SCORE_BRANCH
This is a 19-bit reloc with the right 1 bit assumed to be 0
@end deffn
@deffn {} BFD_RELOC_SCORE_IMM30
This is a 32-bit reloc for 48-bit instructions.
@end deffn
@deffn {} BFD_RELOC_SCORE_IMM32
This is a 32-bit reloc for 48-bit instructions.
@end deffn
@deffn {} BFD_RELOC_SCORE16_JMP
This is a 11-bit reloc with the right 1 bit assumed to be 0
@end deffn
@deffn {} BFD_RELOC_SCORE16_BRANCH
This is a 8-bit reloc with the right 1 bit assumed to be 0
@end deffn
@deffn {} BFD_RELOC_SCORE_BCMP
This is a 9-bit reloc with the right 1 bit assumed to be 0
@end deffn
@deffn {} BFD_RELOC_SCORE_GOT15
@deffnx {} BFD_RELOC_SCORE_GOT_LO16
@deffnx {} BFD_RELOC_SCORE_CALL15
@deffnx {} BFD_RELOC_SCORE_DUMMY_HI16
Undocumented Score relocs
@end deffn
@deffn {} BFD_RELOC_IP2K_FR9
Scenix IP2K - 9-bit register number / data address
@end deffn
@deffn {} BFD_RELOC_IP2K_BANK
Scenix IP2K - 4-bit register/data bank number
@end deffn
@deffn {} BFD_RELOC_IP2K_ADDR16CJP
Scenix IP2K - low 13 bits of instruction word address
@end deffn
@deffn {} BFD_RELOC_IP2K_PAGE3
Scenix IP2K - high 3 bits of instruction word address
@end deffn
@deffn {} BFD_RELOC_IP2K_LO8DATA
@deffnx {} BFD_RELOC_IP2K_HI8DATA
@deffnx {} BFD_RELOC_IP2K_EX8DATA
Scenix IP2K - ext/low/high 8 bits of data address
@end deffn
@deffn {} BFD_RELOC_IP2K_LO8INSN
@deffnx {} BFD_RELOC_IP2K_HI8INSN
Scenix IP2K - low/high 8 bits of instruction word address
@end deffn
@deffn {} BFD_RELOC_IP2K_PC_SKIP
Scenix IP2K - even/odd PC modifier to modify snb pcl.0
@end deffn
@deffn {} BFD_RELOC_IP2K_TEXT
Scenix IP2K - 16 bit word address in text section.
@end deffn
@deffn {} BFD_RELOC_IP2K_FR_OFFSET
Scenix IP2K - 7-bit sp or dp offset
@end deffn
@deffn {} BFD_RELOC_VPE4KMATH_DATA
@deffnx {} BFD_RELOC_VPE4KMATH_INSN
Scenix VPE4K coprocessor - data/insn-space addressing
@end deffn
@deffn {} BFD_RELOC_VTABLE_INHERIT
@deffnx {} BFD_RELOC_VTABLE_ENTRY
These two relocations are used by the linker to determine which of
the entries in a C++ virtual function table are actually used.  When
the --gc-sections option is given, the linker will zero out the entries
that are not used, so that the code for those functions need not be
included in the output.

VTABLE_INHERIT is a zero-space relocation used to describe to the
linker the inheritance tree of a C++ virtual function table.  The
relocation's symbol should be the parent class' vtable, and the
relocation should be located at the child vtable.

VTABLE_ENTRY is a zero-space relocation that describes the use of a
virtual function table entry.  The reloc's symbol should refer to the
table of the class mentioned in the code.  Off of that base, an offset
describes the entry that is being used.  For Rela hosts, this offset
is stored in the reloc's addend.  For Rel hosts, we are forced to put
this offset in the reloc's section offset.
@end deffn
@deffn {} BFD_RELOC_IA64_IMM14
@deffnx {} BFD_RELOC_IA64_IMM22
@deffnx {} BFD_RELOC_IA64_IMM64
@deffnx {} BFD_RELOC_IA64_DIR32MSB
@deffnx {} BFD_RELOC_IA64_DIR32LSB
@deffnx {} BFD_RELOC_IA64_DIR64MSB
@deffnx {} BFD_RELOC_IA64_DIR64LSB
@deffnx {} BFD_RELOC_IA64_GPREL22
@deffnx {} BFD_RELOC_IA64_GPREL64I
@deffnx {} BFD_RELOC_IA64_GPREL32MSB
@deffnx {} BFD_RELOC_IA64_GPREL32LSB
@deffnx {} BFD_RELOC_IA64_GPREL64MSB
@deffnx {} BFD_RELOC_IA64_GPREL64LSB
@deffnx {} BFD_RELOC_IA64_LTOFF22
@deffnx {} BFD_RELOC_IA64_LTOFF64I
@deffnx {} BFD_RELOC_IA64_PLTOFF22
@deffnx {} BFD_RELOC_IA64_PLTOFF64I
@deffnx {} BFD_RELOC_IA64_PLTOFF64MSB
@deffnx {} BFD_RELOC_IA64_PLTOFF64LSB
@deffnx {} BFD_RELOC_IA64_FPTR64I
@deffnx {} BFD_RELOC_IA64_FPTR32MSB
@deffnx {} BFD_RELOC_IA64_FPTR32LSB
@deffnx {} BFD_RELOC_IA64_FPTR64MSB
@deffnx {} BFD_RELOC_IA64_FPTR64LSB
@deffnx {} BFD_RELOC_IA64_PCREL21B
@deffnx {} BFD_RELOC_IA64_PCREL21BI
@deffnx {} BFD_RELOC_IA64_PCREL21M
@deffnx {} BFD_RELOC_IA64_PCREL21F
@deffnx {} BFD_RELOC_IA64_PCREL22
@deffnx {} BFD_RELOC_IA64_PCREL60B
@deffnx {} BFD_RELOC_IA64_PCREL64I
@deffnx {} BFD_RELOC_IA64_PCREL32MSB
@deffnx {} BFD_RELOC_IA64_PCREL32LSB
@deffnx {} BFD_RELOC_IA64_PCREL64MSB
@deffnx {} BFD_RELOC_IA64_PCREL64LSB
@deffnx {} BFD_RELOC_IA64_LTOFF_FPTR22
@deffnx {} BFD_RELOC_IA64_LTOFF_FPTR64I
@deffnx {} BFD_RELOC_IA64_LTOFF_FPTR32MSB
@deffnx {} BFD_RELOC_IA64_LTOFF_FPTR32LSB
@deffnx {} BFD_RELOC_IA64_LTOFF_FPTR64MSB
@deffnx {} BFD_RELOC_IA64_LTOFF_FPTR64LSB
@deffnx {} BFD_RELOC_IA64_SEGREL32MSB
@deffnx {} BFD_RELOC_IA64_SEGREL32LSB
@deffnx {} BFD_RELOC_IA64_SEGREL64MSB
@deffnx {} BFD_RELOC_IA64_SEGREL64LSB
@deffnx {} BFD_RELOC_IA64_SECREL32MSB
@deffnx {} BFD_RELOC_IA64_SECREL32LSB
@deffnx {} BFD_RELOC_IA64_SECREL64MSB
@deffnx {} BFD_RELOC_IA64_SECREL64LSB
@deffnx {} BFD_RELOC_IA64_REL32MSB
@deffnx {} BFD_RELOC_IA64_REL32LSB
@deffnx {} BFD_RELOC_IA64_REL64MSB
@deffnx {} BFD_RELOC_IA64_REL64LSB
@deffnx {} BFD_RELOC_IA64_LTV32MSB
@deffnx {} BFD_RELOC_IA64_LTV32LSB
@deffnx {} BFD_RELOC_IA64_LTV64MSB
@deffnx {} BFD_RELOC_IA64_LTV64LSB
@deffnx {} BFD_RELOC_IA64_IPLTMSB
@deffnx {} BFD_RELOC_IA64_IPLTLSB
@deffnx {} BFD_RELOC_IA64_COPY
@deffnx {} BFD_RELOC_IA64_LTOFF22X
@deffnx {} BFD_RELOC_IA64_LDXMOV
@deffnx {} BFD_RELOC_IA64_TPREL14
@deffnx {} BFD_RELOC_IA64_TPREL22
@deffnx {} BFD_RELOC_IA64_TPREL64I
@deffnx {} BFD_RELOC_IA64_TPREL64MSB
@deffnx {} BFD_RELOC_IA64_TPREL64LSB
@deffnx {} BFD_RELOC_IA64_LTOFF_TPREL22
@deffnx {} BFD_RELOC_IA64_DTPMOD64MSB
@deffnx {} BFD_RELOC_IA64_DTPMOD64LSB
@deffnx {} BFD_RELOC_IA64_LTOFF_DTPMOD22
@deffnx {} BFD_RELOC_IA64_DTPREL14
@deffnx {} BFD_RELOC_IA64_DTPREL22
@deffnx {} BFD_RELOC_IA64_DTPREL64I
@deffnx {} BFD_RELOC_IA64_DTPREL32MSB
@deffnx {} BFD_RELOC_IA64_DTPREL32LSB
@deffnx {} BFD_RELOC_IA64_DTPREL64MSB
@deffnx {} BFD_RELOC_IA64_DTPREL64LSB
@deffnx {} BFD_RELOC_IA64_LTOFF_DTPREL22
Intel IA64 Relocations.
@end deffn
@deffn {} BFD_RELOC_M68HC11_HI8
Motorola 68HC11 reloc.
This is the 8 bit high part of an absolute address.
@end deffn
@deffn {} BFD_RELOC_M68HC11_LO8
Motorola 68HC11 reloc.
This is the 8 bit low part of an absolute address.
@end deffn
@deffn {} BFD_RELOC_M68HC11_3B
Motorola 68HC11 reloc.
This is the 3 bit of a value.
@end deffn
@deffn {} BFD_RELOC_M68HC11_RL_JUMP
Motorola 68HC11 reloc.
This reloc marks the beginning of a jump/call instruction.
It is used for linker relaxation to correctly identify beginning
of instruction and change some branches to use PC-relative
addressing mode.
@end deffn
@deffn {} BFD_RELOC_M68HC11_RL_GROUP
Motorola 68HC11 reloc.
This reloc marks a group of several instructions that gcc generates
and for which the linker relaxation pass can modify and/or remove
some of them.
@end deffn
@deffn {} BFD_RELOC_M68HC11_LO16
Motorola 68HC11 reloc.
This is the 16-bit lower part of an address.  It is used for 'call'
instruction to specify the symbol address without any special
transformation (due to memory bank window).
@end deffn
@deffn {} BFD_RELOC_M68HC11_PAGE
Motorola 68HC11 reloc.
This is a 8-bit reloc that specifies the page number of an address.
It is used by 'call' instruction to specify the page number of
the symbol.
@end deffn
@deffn {} BFD_RELOC_M68HC11_24
Motorola 68HC11 reloc.
This is a 24-bit reloc that represents the address with a 16-bit
value and a 8-bit page number.  The symbol address is transformed
to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
@end deffn
@deffn {} BFD_RELOC_M68HC12_5B
Motorola 68HC12 reloc.
This is the 5 bits of a value.
@end deffn
@deffn {} BFD_RELOC_16C_NUM08
@deffnx {} BFD_RELOC_16C_NUM08_C
@deffnx {} BFD_RELOC_16C_NUM16
@deffnx {} BFD_RELOC_16C_NUM16_C
@deffnx {} BFD_RELOC_16C_NUM32
@deffnx {} BFD_RELOC_16C_NUM32_C
@deffnx {} BFD_RELOC_16C_DISP04
@deffnx {} BFD_RELOC_16C_DISP04_C
@deffnx {} BFD_RELOC_16C_DISP08
@deffnx {} BFD_RELOC_16C_DISP08_C
@deffnx {} BFD_RELOC_16C_DISP16
@deffnx {} BFD_RELOC_16C_DISP16_C
@deffnx {} BFD_RELOC_16C_DISP24
@deffnx {} BFD_RELOC_16C_DISP24_C
@deffnx {} BFD_RELOC_16C_DISP24a
@deffnx {} BFD_RELOC_16C_DISP24a_C
@deffnx {} BFD_RELOC_16C_REG04
@deffnx {} BFD_RELOC_16C_REG04_C
@deffnx {} BFD_RELOC_16C_REG04a
@deffnx {} BFD_RELOC_16C_REG04a_C
@deffnx {} BFD_RELOC_16C_REG14
@deffnx {} BFD_RELOC_16C_REG14_C
@deffnx {} BFD_RELOC_16C_REG16
@deffnx {} BFD_RELOC_16C_REG16_C
@deffnx {} BFD_RELOC_16C_REG20
@deffnx {} BFD_RELOC_16C_REG20_C
@deffnx {} BFD_RELOC_16C_ABS20
@deffnx {} BFD_RELOC_16C_ABS20_C
@deffnx {} BFD_RELOC_16C_ABS24
@deffnx {} BFD_RELOC_16C_ABS24_C
@deffnx {} BFD_RELOC_16C_IMM04
@deffnx {} BFD_RELOC_16C_IMM04_C
@deffnx {} BFD_RELOC_16C_IMM16
@deffnx {} BFD_RELOC_16C_IMM16_C
@deffnx {} BFD_RELOC_16C_IMM20
@deffnx {} BFD_RELOC_16C_IMM20_C
@deffnx {} BFD_RELOC_16C_IMM24
@deffnx {} BFD_RELOC_16C_IMM24_C
@deffnx {} BFD_RELOC_16C_IMM32
@deffnx {} BFD_RELOC_16C_IMM32_C
NS CR16C Relocations.
@end deffn
@deffn {} BFD_RELOC_CR16_NUM8
@deffnx {} BFD_RELOC_CR16_NUM16
@deffnx {} BFD_RELOC_CR16_NUM32
@deffnx {} BFD_RELOC_CR16_NUM32a
@deffnx {} BFD_RELOC_CR16_REGREL0
@deffnx {} BFD_RELOC_CR16_REGREL4
@deffnx {} BFD_RELOC_CR16_REGREL4a
@deffnx {} BFD_RELOC_CR16_REGREL14
@deffnx {} BFD_RELOC_CR16_REGREL14a
@deffnx {} BFD_RELOC_CR16_REGREL16
@deffnx {} BFD_RELOC_CR16_REGREL20
@deffnx {} BFD_RELOC_CR16_REGREL20a
@deffnx {} BFD_RELOC_CR16_ABS20
@deffnx {} BFD_RELOC_CR16_ABS24
@deffnx {} BFD_RELOC_CR16_IMM4
@deffnx {} BFD_RELOC_CR16_IMM8
@deffnx {} BFD_RELOC_CR16_IMM16
@deffnx {} BFD_RELOC_CR16_IMM20
@deffnx {} BFD_RELOC_CR16_IMM24
@deffnx {} BFD_RELOC_CR16_IMM32
@deffnx {} BFD_RELOC_CR16_IMM32a
@deffnx {} BFD_RELOC_CR16_DISP4
@deffnx {} BFD_RELOC_CR16_DISP8
@deffnx {} BFD_RELOC_CR16_DISP16
@deffnx {} BFD_RELOC_CR16_DISP20
@deffnx {} BFD_RELOC_CR16_DISP24
@deffnx {} BFD_RELOC_CR16_DISP24a
@deffnx {} BFD_RELOC_CR16_SWITCH8
@deffnx {} BFD_RELOC_CR16_SWITCH16
@deffnx {} BFD_RELOC_CR16_SWITCH32
@deffnx {} BFD_RELOC_CR16_GOT_REGREL20
@deffnx {} BFD_RELOC_CR16_GOTC_REGREL20
@deffnx {} BFD_RELOC_CR16_GLOB_DAT
NS CR16 Relocations.
@end deffn
@deffn {} BFD_RELOC_CRX_REL4
@deffnx {} BFD_RELOC_CRX_REL8
@deffnx {} BFD_RELOC_CRX_REL8_CMP
@deffnx {} BFD_RELOC_CRX_REL16
@deffnx {} BFD_RELOC_CRX_REL24
@deffnx {} BFD_RELOC_CRX_REL32
@deffnx {} BFD_RELOC_CRX_REGREL12
@deffnx {} BFD_RELOC_CRX_REGREL22
@deffnx {} BFD_RELOC_CRX_REGREL28
@deffnx {} BFD_RELOC_CRX_REGREL32
@deffnx {} BFD_RELOC_CRX_ABS16
@deffnx {} BFD_RELOC_CRX_ABS32
@deffnx {} BFD_RELOC_CRX_NUM8
@deffnx {} BFD_RELOC_CRX_NUM16
@deffnx {} BFD_RELOC_CRX_NUM32
@deffnx {} BFD_RELOC_CRX_IMM16
@deffnx {} BFD_RELOC_CRX_IMM32
@deffnx {} BFD_RELOC_CRX_SWITCH8
@deffnx {} BFD_RELOC_CRX_SWITCH16
@deffnx {} BFD_RELOC_CRX_SWITCH32
NS CRX Relocations.
@end deffn
@deffn {} BFD_RELOC_CRIS_BDISP8
@deffnx {} BFD_RELOC_CRIS_UNSIGNED_5
@deffnx {} BFD_RELOC_CRIS_SIGNED_6
@deffnx {} BFD_RELOC_CRIS_UNSIGNED_6
@deffnx {} BFD_RELOC_CRIS_SIGNED_8
@deffnx {} BFD_RELOC_CRIS_UNSIGNED_8
@deffnx {} BFD_RELOC_CRIS_SIGNED_16
@deffnx {} BFD_RELOC_CRIS_UNSIGNED_16
@deffnx {} BFD_RELOC_CRIS_LAPCQ_OFFSET
@deffnx {} BFD_RELOC_CRIS_UNSIGNED_4
These relocs are only used within the CRIS assembler.  They are not
(at present) written to any object files.
@end deffn
@deffn {} BFD_RELOC_CRIS_COPY
@deffnx {} BFD_RELOC_CRIS_GLOB_DAT
@deffnx {} BFD_RELOC_CRIS_JUMP_SLOT
@deffnx {} BFD_RELOC_CRIS_RELATIVE
Relocs used in ELF shared libraries for CRIS.
@end deffn
@deffn {} BFD_RELOC_CRIS_32_GOT
32-bit offset to symbol-entry within GOT.
@end deffn
@deffn {} BFD_RELOC_CRIS_16_GOT
16-bit offset to symbol-entry within GOT.
@end deffn
@deffn {} BFD_RELOC_CRIS_32_GOTPLT
32-bit offset to symbol-entry within GOT, with PLT handling.
@end deffn
@deffn {} BFD_RELOC_CRIS_16_GOTPLT
16-bit offset to symbol-entry within GOT, with PLT handling.
@end deffn
@deffn {} BFD_RELOC_CRIS_32_GOTREL
32-bit offset to symbol, relative to GOT.
@end deffn
@deffn {} BFD_RELOC_CRIS_32_PLT_GOTREL
32-bit offset to symbol with PLT entry, relative to GOT.
@end deffn
@deffn {} BFD_RELOC_CRIS_32_PLT_PCREL
32-bit offset to symbol with PLT entry, relative to this relocation.
@end deffn
@deffn {} BFD_RELOC_CRIS_32_GOT_GD
@deffnx {} BFD_RELOC_CRIS_16_GOT_GD
@deffnx {} BFD_RELOC_CRIS_32_GD
@deffnx {} BFD_RELOC_CRIS_DTP
@deffnx {} BFD_RELOC_CRIS_32_DTPREL
@deffnx {} BFD_RELOC_CRIS_16_DTPREL
@deffnx {} BFD_RELOC_CRIS_32_GOT_TPREL
@deffnx {} BFD_RELOC_CRIS_16_GOT_TPREL
@deffnx {} BFD_RELOC_CRIS_32_TPREL
@deffnx {} BFD_RELOC_CRIS_16_TPREL
@deffnx {} BFD_RELOC_CRIS_DTPMOD
@deffnx {} BFD_RELOC_CRIS_32_IE
Relocs used in TLS code for CRIS.
@end deffn
@deffn {} BFD_RELOC_860_COPY
@deffnx {} BFD_RELOC_860_GLOB_DAT
@deffnx {} BFD_RELOC_860_JUMP_SLOT
@deffnx {} BFD_RELOC_860_RELATIVE
@deffnx {} BFD_RELOC_860_PC26
@deffnx {} BFD_RELOC_860_PLT26
@deffnx {} BFD_RELOC_860_PC16
@deffnx {} BFD_RELOC_860_LOW0
@deffnx {} BFD_RELOC_860_SPLIT0
@deffnx {} BFD_RELOC_860_LOW1
@deffnx {} BFD_RELOC_860_SPLIT1
@deffnx {} BFD_RELOC_860_LOW2
@deffnx {} BFD_RELOC_860_SPLIT2
@deffnx {} BFD_RELOC_860_LOW3
@deffnx {} BFD_RELOC_860_LOGOT0
@deffnx {} BFD_RELOC_860_SPGOT0
@deffnx {} BFD_RELOC_860_LOGOT1
@deffnx {} BFD_RELOC_860_SPGOT1
@deffnx {} BFD_RELOC_860_LOGOTOFF0
@deffnx {} BFD_RELOC_860_SPGOTOFF0
@deffnx {} BFD_RELOC_860_LOGOTOFF1
@deffnx {} BFD_RELOC_860_SPGOTOFF1
@deffnx {} BFD_RELOC_860_LOGOTOFF2
@deffnx {} BFD_RELOC_860_LOGOTOFF3
@deffnx {} BFD_RELOC_860_LOPC
@deffnx {} BFD_RELOC_860_HIGHADJ
@deffnx {} BFD_RELOC_860_HAGOT
@deffnx {} BFD_RELOC_860_HAGOTOFF
@deffnx {} BFD_RELOC_860_HAPC
@deffnx {} BFD_RELOC_860_HIGH
@deffnx {} BFD_RELOC_860_HIGOT
@deffnx {} BFD_RELOC_860_HIGOTOFF
Intel i860 Relocations.
@end deffn
@deffn {} BFD_RELOC_OPENRISC_ABS_26
@deffnx {} BFD_RELOC_OPENRISC_REL_26
OpenRISC Relocations.
@end deffn
@deffn {} BFD_RELOC_H8_DIR16A8
@deffnx {} BFD_RELOC_H8_DIR16R8
@deffnx {} BFD_RELOC_H8_DIR24A8
@deffnx {} BFD_RELOC_H8_DIR24R8
@deffnx {} BFD_RELOC_H8_DIR32A16
H8 elf Relocations.
@end deffn
@deffn {} BFD_RELOC_XSTORMY16_REL_12
@deffnx {} BFD_RELOC_XSTORMY16_12
@deffnx {} BFD_RELOC_XSTORMY16_24
@deffnx {} BFD_RELOC_XSTORMY16_FPTR16
Sony Xstormy16 Relocations.
@end deffn
@deffn {} BFD_RELOC_RELC
Self-describing complex relocations.
@end deffn
@deffn {} BFD_RELOC_XC16X_PAG
@deffnx {} BFD_RELOC_XC16X_POF
@deffnx {} BFD_RELOC_XC16X_SEG
@deffnx {} BFD_RELOC_XC16X_SOF
Infineon Relocations.
@end deffn
@deffn {} BFD_RELOC_VAX_GLOB_DAT
@deffnx {} BFD_RELOC_VAX_JMP_SLOT
@deffnx {} BFD_RELOC_VAX_RELATIVE
Relocations used by VAX ELF.
@end deffn
@deffn {} BFD_RELOC_MT_PC16
Morpho MT - 16 bit immediate relocation.
@end deffn
@deffn {} BFD_RELOC_MT_HI16
Morpho MT - Hi 16 bits of an address.
@end deffn
@deffn {} BFD_RELOC_MT_LO16
Morpho MT - Low 16 bits of an address.
@end deffn
@deffn {} BFD_RELOC_MT_GNU_VTINHERIT
Morpho MT - Used to tell the linker which vtable entries are used.
@end deffn
@deffn {} BFD_RELOC_MT_GNU_VTENTRY
Morpho MT - Used to tell the linker which vtable entries are used.
@end deffn
@deffn {} BFD_RELOC_MT_PCINSN8
Morpho MT - 8 bit immediate relocation.
@end deffn
@deffn {} BFD_RELOC_MSP430_10_PCREL
@deffnx {} BFD_RELOC_MSP430_16_PCREL
@deffnx {} BFD_RELOC_MSP430_16
@deffnx {} BFD_RELOC_MSP430_16_PCREL_BYTE
@deffnx {} BFD_RELOC_MSP430_16_BYTE
@deffnx {} BFD_RELOC_MSP430_2X_PCREL
@deffnx {} BFD_RELOC_MSP430_RL_PCREL
msp430 specific relocation codes
@end deffn
@deffn {} BFD_RELOC_IQ2000_OFFSET_16
@deffnx {} BFD_RELOC_IQ2000_OFFSET_21
@deffnx {} BFD_RELOC_IQ2000_UHI16
IQ2000 Relocations.
@end deffn
@deffn {} BFD_RELOC_XTENSA_RTLD
Special Xtensa relocation used only by PLT entries in ELF shared
objects to indicate that the runtime linker should set the value
to one of its own internal functions or data structures.
@end deffn
@deffn {} BFD_RELOC_XTENSA_GLOB_DAT
@deffnx {} BFD_RELOC_XTENSA_JMP_SLOT
@deffnx {} BFD_RELOC_XTENSA_RELATIVE
Xtensa relocations for ELF shared objects.
@end deffn
@deffn {} BFD_RELOC_XTENSA_PLT
Xtensa relocation used in ELF object files for symbols that may require
PLT entries.  Otherwise, this is just a generic 32-bit relocation.
@end deffn
@deffn {} BFD_RELOC_XTENSA_DIFF8
@deffnx {} BFD_RELOC_XTENSA_DIFF16
@deffnx {} BFD_RELOC_XTENSA_DIFF32
Xtensa relocations to mark the difference of two local symbols.
These are only needed to support linker relaxation and can be ignored
when not relaxing.  The field is set to the value of the difference
assuming no relaxation.  The relocation encodes the position of the
first symbol so the linker can determine whether to adjust the field
value.
@end deffn
@deffn {} BFD_RELOC_XTENSA_SLOT0_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT1_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT2_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT3_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT4_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT5_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT6_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT7_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT8_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT9_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT10_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT11_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT12_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT13_OP
@deffnx {} BFD_RELOC_XTENSA_SLOT14_OP
Generic Xtensa relocations for instruction operands.  Only the slot
number is encoded in the relocation.  The relocation applies to the
last PC-relative immediate operand, or if there are no PC-relative
immediates, to the last immediate operand.
@end deffn
@deffn {} BFD_RELOC_XTENSA_SLOT0_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT1_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT2_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT3_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT4_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT5_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT6_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT7_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT8_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT9_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT10_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT11_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT12_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT13_ALT
@deffnx {} BFD_RELOC_XTENSA_SLOT14_ALT
Alternate Xtensa relocations.  Only the slot is encoded in the
relocation.  The meaning of these relocations is opcode-specific.
@end deffn
@deffn {} BFD_RELOC_XTENSA_OP0
@deffnx {} BFD_RELOC_XTENSA_OP1
@deffnx {} BFD_RELOC_XTENSA_OP2
Xtensa relocations for backward compatibility.  These have all been
replaced by BFD_RELOC_XTENSA_SLOT0_OP.
@end deffn
@deffn {} BFD_RELOC_XTENSA_ASM_EXPAND
Xtensa relocation to mark that the assembler expanded the
instructions from an original target.  The expansion size is
encoded in the reloc size.
@end deffn
@deffn {} BFD_RELOC_XTENSA_ASM_SIMPLIFY
Xtensa relocation to mark that the linker should simplify
assembler-expanded instructions.  This is commonly used
internally by the linker after analysis of a
BFD_RELOC_XTENSA_ASM_EXPAND.
@end deffn
@deffn {} BFD_RELOC_XTENSA_TLSDESC_FN
@deffnx {} BFD_RELOC_XTENSA_TLSDESC_ARG
@deffnx {} BFD_RELOC_XTENSA_TLS_DTPOFF
@deffnx {} BFD_RELOC_XTENSA_TLS_TPOFF
@deffnx {} BFD_RELOC_XTENSA_TLS_FUNC
@deffnx {} BFD_RELOC_XTENSA_TLS_ARG
@deffnx {} BFD_RELOC_XTENSA_TLS_CALL
Xtensa TLS relocations.
@end deffn
@deffn {} BFD_RELOC_Z80_DISP8
8 bit signed offset in (ix+d) or (iy+d).
@end deffn
@deffn {} BFD_RELOC_Z8K_DISP7
DJNZ offset.
@end deffn
@deffn {} BFD_RELOC_Z8K_CALLR
CALR offset.
@end deffn
@deffn {} BFD_RELOC_Z8K_IMM4L
4 bit value.
@end deffn
@deffn {} BFD_RELOC_LM32_CALL
@deffnx {} BFD_RELOC_LM32_BRANCH
@deffnx {} BFD_RELOC_LM32_16_GOT
@deffnx {} BFD_RELOC_LM32_GOTOFF_HI16
@deffnx {} BFD_RELOC_LM32_GOTOFF_LO16
@deffnx {} BFD_RELOC_LM32_COPY
@deffnx {} BFD_RELOC_LM32_GLOB_DAT
@deffnx {} BFD_RELOC_LM32_JMP_SLOT
@deffnx {} BFD_RELOC_LM32_RELATIVE
Lattice Mico32 relocations.
@end deffn
@deffn {} BFD_RELOC_MACH_O_SECTDIFF
Difference between two section addreses.  Must be followed by a
BFD_RELOC_MACH_O_PAIR.
@end deffn
@deffn {} BFD_RELOC_MACH_O_PAIR
Mach-O generic relocations.
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_32_LO
This is a 32 bit reloc for the microblaze that stores the 
low 16 bits of a value
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_32_LO_PCREL
This is a 32 bit pc-relative reloc for the microblaze that 
stores the low 16 bits of a value
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_32_ROSDA
This is a 32 bit reloc for the microblaze that stores a 
value relative to the read-only small data area anchor
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_32_RWSDA
This is a 32 bit reloc for the microblaze that stores a 
value relative to the read-write small data area anchor
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
This is a 32 bit reloc for the microblaze to handle 
expressions of the form "Symbol Op Symbol"
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_64_NONE
This is a 64 bit reloc that stores the 32 bit pc relative 
value in two words (with an imm instruction).  No relocation is 
done here - only used for relaxing
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_64_GOTPC
This is a 64 bit reloc that stores the 32 bit pc relative 
value in two words (with an imm instruction).  The relocation is
PC-relative GOT offset
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_64_GOT
This is a 64 bit reloc that stores the 32 bit pc relative 
value in two words (with an imm instruction).  The relocation is
GOT offset
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_64_PLT
This is a 64 bit reloc that stores the 32 bit pc relative 
value in two words (with an imm instruction).  The relocation is
PC-relative offset into PLT
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_64_GOTOFF
This is a 64 bit reloc that stores the 32 bit GOT relative 
value in two words (with an imm instruction).  The relocation is
relative offset from _GLOBAL_OFFSET_TABLE_
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_32_GOTOFF
This is a 32 bit reloc that stores the 32 bit GOT relative 
value in a word.  The relocation is relative offset from
@end deffn
@deffn {} BFD_RELOC_MICROBLAZE_COPY
This is used to tell the dynamic linker to copy the value out of
the dynamic object into the runtime process image.
@end deffn

@example

typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
@end example
@findex bfd_reloc_type_lookup
@subsubsection @code{bfd_reloc_type_lookup}
@strong{Synopsis}
@example
reloc_howto_type *bfd_reloc_type_lookup
   (bfd *abfd, bfd_reloc_code_real_type code);
reloc_howto_type *bfd_reloc_name_lookup
   (bfd *abfd, const char *reloc_name);
@end example
@strong{Description}@*
Return a pointer to a howto structure which, when
invoked, will perform the relocation @var{code} on data from the
architecture noted.

@findex bfd_default_reloc_type_lookup
@subsubsection @code{bfd_default_reloc_type_lookup}
@strong{Synopsis}
@example
reloc_howto_type *bfd_default_reloc_type_lookup
   (bfd *abfd, bfd_reloc_code_real_type  code);
@end example
@strong{Description}@*
Provides a default relocation lookup routine for any architecture.

@findex bfd_get_reloc_code_name
@subsubsection @code{bfd_get_reloc_code_name}
@strong{Synopsis}
@example
const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
@end example
@strong{Description}@*
Provides a printable name for the supplied relocation code.
Useful mainly for printing error messages.

@findex bfd_generic_relax_section
@subsubsection @code{bfd_generic_relax_section}
@strong{Synopsis}
@example
bfd_boolean bfd_generic_relax_section
   (bfd *abfd,
    asection *section,
    struct bfd_link_info *,
    bfd_boolean *);
@end example
@strong{Description}@*
Provides default handling for relaxing for back ends which
don't do relaxing.

@findex bfd_generic_gc_sections
@subsubsection @code{bfd_generic_gc_sections}
@strong{Synopsis}
@example
bfd_boolean bfd_generic_gc_sections
   (bfd *, struct bfd_link_info *);
@end example
@strong{Description}@*
Provides default handling for relaxing for back ends which
don't do section gc -- i.e., does nothing.

@findex bfd_generic_merge_sections
@subsubsection @code{bfd_generic_merge_sections}
@strong{Synopsis}
@example
bfd_boolean bfd_generic_merge_sections
   (bfd *, struct bfd_link_info *);
@end example
@strong{Description}@*
Provides default handling for SEC_MERGE section merging for back ends
which don't have SEC_MERGE support -- i.e., does nothing.

@findex bfd_generic_get_relocated_section_contents
@subsubsection @code{bfd_generic_get_relocated_section_contents}
@strong{Synopsis}
@example
bfd_byte *bfd_generic_get_relocated_section_contents
   (bfd *abfd,
    struct bfd_link_info *link_info,
    struct bfd_link_order *link_order,
    bfd_byte *data,
    bfd_boolean relocatable,
    asymbol **symbols);
@end example
@strong{Description}@*
Provides default handling of relocation effort for back ends
which can't be bothered to do it efficiently.