package/openocd/Config.in

   1 config BR2_PACKAGE_OPENOCD
   2         bool "openocd"
   3         help
   4           OpenOCD - Open On-Chip Debugger
   5
   6           http://openocd.sourceforge.net/
   7
   8 if BR2_PACKAGE_OPENOCD
   9
  10 comment "Adapters"
  11
  12 config BR2_PACKAGE_OPENOCD_FTDI
  13         bool "MPSSE mode of FTDI based devices"
  14         select BR2_PACKAGE_LIBUSB
  15         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
  16         help
  17           Enable building support for the MPSSE mode of FTDI
  18           (FT2xxx/FT4xxx) based devices (default is auto)
  19
  20 config BR2_PACKAGE_OPENOCD_STLINK
  21         bool "ST-Link JTAG Programmer"
  22         select BR2_PACKAGE_LIBUSB
  23         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
  24         help
  25           Enable building support for the ST-Link JTAG
  26           Programmer (default is auto)
  27
  28 config BR2_PACKAGE_OPENOCD_TI_ICDI
  29         bool "TI ICDI JTAG Programmer"
  30         select BR2_PACKAGE_LIBUSB
  31         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
  32         help
  33           Enable building support for the TI ICDI JTAG
  34           Programmer (default is auto)
  35
  36 config BR2_PACKAGE_OPENOCD_ULINK
  37         bool "Keil ULINK JTAG Programmer"
  38         select BR2_PACKAGE_LIBUSB
  39         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
  40         help
  41           Enable building support for the Keil ULINK JTAG
  42           Programmer (default is auto)
  43
  44 config BR2_PACKAGE_OPENOCD_UBLASTER2
  45         bool "Altera USB-Blaster II Compatible"
  46         select BR2_PACKAGE_LIBUSB
  47         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
  48         help
  49           Enable building support for the Altera USB-Blaster
  50           II Compatible (default is auto)
  51
  52 config BR2_PACKAGE_OPENOCD_JLINK
  53         bool "Segger J-Link JTAG Programmer"
  54         select BR2_PACKAGE_LIBUSB
  55         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
  56         help
  57           Segger J-Link JTAG Programmer and clone such as Atmel
  58           SAM-ICE
  59
  60 config BR2_PACKAGE_OPENOCD_OSDBM
  61         bool "OSDBM JTAG (only) Programmer"
  62         select BR2_PACKAGE_LIBUSB
  63         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
  64         help
  65           Enable building support for the OSBDM (JTAG only)
  66           Programmer (default is auto)
  67
  68 config BR2_PACKAGE_OPENOCD_OPENDOUS
  69         bool "eStick/opendous JTAG Programmer"
  70         select BR2_PACKAGE_LIBUSB
  71         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
  72         help
  73           Enable building support for the eStick/opendous JTAG
  74           Programmer (default is auto)
  75
  76 config BR2_PACKAGE_OPENOCD_AICE
  77         bool "Andes JTAG Programmer"
  78         select BR2_PACKAGE_LIBUSB
  79         depends on BR2_USE_MMU # use fork()
  80         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
  81         help
  82           Enable building support for the Andes JTAG
  83           Programmer (default is auto)
  84
  85 config BR2_PACKAGE_OPENOCD_VSLLINK
  86         bool "Versaloon-Link JTAG Programmer"
  87         select BR2_PACKAGE_LIBUSB
  88         select BR2_PACKAGE_LIBUSB_COMPAT
  89         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
  90         help
  91           Enable building support for the Versaloon-Link JTAG
  92           Programmer (default is auto)
  93
  94 config BR2_PACKAGE_OPENOCD_USBPROG
  95         bool "USBProg JTAG Programmer"
  96         select BR2_PACKAGE_LIBUSB
  97         select BR2_PACKAGE_LIBUSB_COMPAT
  98         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
  99         help
 100           Enable building support for the USBProg JTAG
 101           Programmer (default is auto)
 102
 103 config BR2_PACKAGE_OPENOCD_RLINK
 104         bool "Raisonance RLink JTAG Programmer"
 105         select BR2_PACKAGE_LIBUSB
 106         select BR2_PACKAGE_LIBUSB_COMPAT
 107         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
 108         help
 109           Enable building support for the Raisonance RLink
 110           JTAG Programmer (default is auto)
 111
 112 config BR2_PACKAGE_OPENOCD_ARMEW
 113         bool "Olimex ARM-JTAG-EW Programmer"
 114         select BR2_PACKAGE_LIBUSB
 115         select BR2_PACKAGE_LIBUSB_COMPAT
 116         depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
 117         help
 118           Enable building support for the Olimex ARM-JTAG-EW
 119           Programmer (default is auto)
 120
 121 config BR2_PACKAGE_OPENOCD_PARPORT
 122         bool "pc parallel port driver"
 123         help
 124           Enable building the pc parallel port driver
 125
 126 config BR2_PACKAGE_OPENOCD_FT2XXX
 127         bool "FT2232 based devices (DEPRECATED)"
 128         select BR2_PACKAGE_LIBFTDI1
 129         depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
 130         help
 131           (DEPRECATED) Enable building support for FT2232
 132           based devices using the libftdi library
 133
 134 config BR2_PACKAGE_OPENOCD_VPI
 135         bool "JTAG VPI"
 136         help
 137           Enable building support for JTAG VPI
 138
 139 config BR2_PACKAGE_OPENOCD_UBLASTER
 140         bool "Altera USB-Blaster"
 141         select BR2_PACKAGE_LIBFTDI1
 142         depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
 143         help
 144           Enable building support for the Altera USB-Blaster
 145           using the libftdi driver, opensource alternate of
 146           FTD2XX
 147
 148 config BR2_PACKAGE_OPENOCD_AMTJT
 149         bool "Amontec JTAG-Accelerator"
 150         help
 151           Enable building the Amontec JTAG-Accelerator driver
 152
 153 if BR2_arm
 154
 155 config BR2_PACKAGE_OPENOCD_EP93XX
 156         bool "EP93xx based SBCs"
 157         help
 158           Enable building support for EP93xx based SBCs
 159
 160 config BR2_PACKAGE_OPENOCD_AT91RM
 161         bool "AT91RM9200 based SBCs"
 162         help
 163           Enable building support for AT91RM9200 based SBCs
 164
 165 config BR2_PACKAGE_OPENOCD_BCM2835
 166         bool "bitbanging on BCM2835"
 167         help
 168           Enable building support for bitbanging on BCM2835
 169           (as found in Raspberry Pi)
 170
 171 endif # BR2_arm
 172
 173 config BR2_PACKAGE_OPENOCD_GW16012
 174         bool "Gateworks GW16012 JTAG Programmer"
 175         help
 176           Enable building support for the Gateworks GW16012
 177           JTAG Programmer
 178
 179 config BR2_PACKAGE_OPENOCD_PRESTO
 180         bool "ASIX Presto Programmer"
 181         select BR2_PACKAGE_LIBFTDI1
 182         depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
 183         help
 184           Enable building support for ASIX Presto Programmer
 185           using the libftdi driver
 186
 187 config BR2_PACKAGE_OPENOCD_OPENJTAG
 188         bool "OpenJTAG Programmer"
 189         select BR2_PACKAGE_LIBFTDI1
 190         select BR2_PACKAGE_LIBUSB
 191         select BR2_PACKAGE_LIBUSB_COMPAT # needs usb.h
 192         depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
 193         help
 194           Enable building support for the OpenJTAG Programmer
 195           with ftdi driver
 196
 197 config BR2_PACKAGE_OPENOCD_BUSPIRATE
 198         bool "Buspirate"
 199         help
 200           Enable building support for the Buspirate
 201
 202 config BR2_PACKAGE_OPENOCD_SYSFS
 203         bool "programming via sysfs gpios"
 204         help
 205           Enable building support for programming driven via
 206           sysfs gpios.
 207
 208 # Many adapters need libusb or libusb-compat, which require threads,
 209 # but we don't want to duplicate this comment for all adapters that
 210 # select libusb or libusb-compat.
 211 comment "many openocd adapters needs a toolchain w/ threads"
 212         depends on !BR2_TOOLCHAIN_HAS_THREADS
 213
 214 endif # BR2_PACKAGE_OPENOCD