Use Markdown changelog entry

[cabal.git] / CONTRIBUTING.md

# Contributing to Cabal

## Building Cabal for hacking

If you use the `cabal` executable from the latest version of the
[cabal-install](https://hackage.haskell.org/package/cabal-install) package
published on Hackage, it is sufficient to run:

```
$ cabal build cabal
```

If you have trouble building the testsuite for this initial build, try building
with the release project that excludes this testsuite:

```
$ cabal build cabal --project-file=cabal.release.project
```

> [!NOTE]
> The default `cabal.project` is picked up implicitly as if the
> `--project-file=cabal.project` explicit option had been given.

For developing, we recommend using the locally built version of `cabal`, the
executable, if only because one of the released versions available may be
lacking a fix. This can be installed:

```
$ cabal install cabal-install:exe:cabal --overwrite-policy=always
```

It can be run without first installing it with `cabal run cabal --` followed by
its own arguments, as shown here for `build --help`:

```
$ cabal run cabal -- build --help
```

> [!NOTE]
> If you're using Nix, you might find it convenient to work within a shell that has the following `Cabal` development dependencies:
> ```bash
> $ nix-shell -p cabal-install ghc ghcid pkg-config zlib.dev # incomplete
> ```
> One dependency that we left out in the above command is `haskellPackages.fourmolu_0_12_0_0` which would need to be installed manually.
> A Nix flake developer shell with these dependencies is also available, supported solely by the community, through the command `nix develop github:yvan-sraka/cabal.nix`.

The location of your build products will vary depending on which version of
cabal-install you use to build; see the documentation section
[Where are my build products?](http://cabal.readthedocs.io/en/latest/nix-local-build.html#where-are-my-build-products)
to find the binary (or just run `find -type f -executable -name cabal`).

Here are some other useful variations on the commands:

```
$ cabal build Cabal                  # build library only
$ cabal build Cabal-tests:unit-tests # build Cabal's unit test suite
$ cabal build cabal-tests            # etc...
```

## Running tests

There are two ways to run tests: in CI with GitHub actions and locally with
`./validate.sh`.

### Using GitHub Actions.

If you are not in a hurry, the most convenient way to run tests on Cabal
is to make a branch on GitHub and then open a pull request; our
continuous integration service on GitHub Actions builds and
tests your code.  Title your PR with WIP so we know that it does not need
code review.

Some tips for using GitHub Actions effectively:

* GitHub Actions builds take a long time.  Use them when you are pretty
  sure everything is OK; otherwise, try to run relevant tests locally
  first.

* If you are only changing documentation in the `docs/` subdirectory,
  or if you change `README.md` or `CONTRIBUTING.md`, then we only run a
  small subset of the CI jobs. You can therefore open small PRs with
  improvements to the documentation without feeling guilty about wasted
  resources!

* Watch over your jobs on the [GitHub Actions website](http://github.org/haskell/cabal/actions).
  If you know a build of yours is going to fail (because one job has
  already failed), be nice to others and cancel the rest of the jobs,
  so that other commits on the build queue can be processed.

### How to debug a failing CI test.

One of the annoying things about running tests on CI is when they
fail, there is often no easy way to further troubleshoot the broken
build.  Here are some guidelines for debugging continuous integration
failures:

1. Can you tell what the problem is by looking at the logs?  The
   `cabal-testsuite` tests run with `-v` logging by default, which
   is dumped to the log upon failure; you may be able to figure out
   what the problem is directly this way.

2. Can you reproduce the problem by running the test locally?
   See the next section for how to run the various test suites
   on your local machine.

3. Is the test failing only for a specific version of GHC, or
   a specific operating system?  If so, try reproducing the
   problem on the specific configuration.

4. Is the test failing on a GitHub Actions per-GHC build.
   In this case, if you click on "Branch", you can get access to
   the precise binaries that were built by GitHub Actions that are being
   tested.  If you have an Ubuntu system, you can download
   the binaries and run them directly.

If none of these let you reproduce, there might be some race condition
or continuous integration breakage; please file a bug.

### Running tests locally.

The [`./validate.sh`](./validate.sh) script runs all the test suites. It takes
various options to restrict the test suites it runs; use `--help` to list them.

To run tests locally with `cabal`, you will need to know the
name of the test suite you want.  Cabal and cabal-install have
several.  Also, you'll want to read [Where are my build products?](http://cabal.readthedocs.io/en/latest/nix-local-build.html#where-are-my-build-products)

The most important test suite is `cabal-testsuite`: most user-visible
changes to Cabal should come with a test in this framework.  See
[cabal-testsuite/README.md](cabal-testsuite/README.md) for more
information about how to run tests and write new ones.  Quick
start: use `cabal-tests` to run `Cabal` tests, and `cabal-tests
--with-cabal=/path/to/cabal` to run `cabal-install` tests
(don't forget `--with-cabal`! Your cabal-install tests won't
run without it).

There are also other test suites:

* `Cabal-tests:unit-tests` are small, quick-running unit tests
  on small pieces of functionality in Cabal.  If you are working
  on some utility functions in the Cabal library you should run this
  test suite.

* `cabal-install:unit-tests` are small, quick-running unit tests on
  small pieces of functionality in cabal-install.  If you are working
  on some utility functions in cabal-install you should run this test
  suite.

* `cabal-install:long-tests` are QuickCheck tests on
  cabal-install's dependency solver, VCS, and file monitoring code.
  If you are working on the solver you should run this test suite.

* `cabal-install:integration-tests2` are integration tests on some
  top-level API functions inside the `cabal-install` source code.

For these test executables, `-p` which applies a regex filter to the test
names. When running `cabal-install` test suites, one need only use `cabal test` or
`cabal run <test-target>` in order to test locally.

## QA Notes

Manual Quality Assurance (QA) is performed to ensure that the changes impacting
the command-line interface, whether adding or modifying a behaviour,
are tested before being released. This allows us to catch UX regressions and put
a human perspective into testing.

Contributions that touch `cabal-install` are expected to include notes for the QA team.
They are a description of an expected result upon calling `cabal-install` with certain parameters,
and should be written in the body of the ticket or PR under their own heading, like this:

```markdown
## QA Notes

Calling `cabal haddock-project` should produce documentation for the whole
cabal project with the following defaults enabled:
* Documentation lives in ./haddocks
* The file `./haddocks/index.html` should exist
```

Manual QA is not expected to find every possible bug, but to really challenge the assumptions of the contributor, and to verify that their own testing
of their patch is not influenced by their setup or implicit knowledge of the system.


## Code Style

We use automated formatting with Fourmolu to enforce a unified style across the code bases. It is checked in the CI process.
After installing Fourmolu 0.12, there are some makefile targets to help formatting
the code base.


* `make style` - Format the `Cabal`, `Cabal-syntax` and `cabal-install` directories.
* `make style-modified` - Format files modified in the current tree.
* `make style-commit COMMIT=<ref>` - Format files modified between HEAD and the given reference.

## Whitespace Conventions

We use automated whitespace convention checking. Violations can be fixed by
running [fix-whitespace](https://hackage.haskell.org/package/fix-whitespace). If
you push a fix of a whitespace violation, please do so in a _separate commit_. For convenience,
`make whitespace` will show violations and `make fix-whitespace` will fix them, if the
`fix-whitespace` utility is installed.

## Other Conventions

* Format your commit messages [in the standard way](https://chris.beams.io/posts/git-commit/#seven-rules).

* A lot of Cabal does not have top-level comments.  We are trying to
  fix this.  If you add new top-level definitions, please Haddock them;
  and if you spend some time understanding what a function does, help
  us out and add a comment.  We'll try to remind you during code review.

* If you do something tricky or non-obvious, add a comment.

* For local imports (Cabal module importing Cabal module), import lists
  are NOT required (although you may use them at your discretion.)  For
  third-party and standard library imports, please use either qualified imports
  or explicit import lists.

* You can use basically any GHC extension supported by a GHC in our
  support window, except Template Haskell, which would cause
  bootstrapping problems in the GHC compilation process.

* Our GHC support window is five years for the Cabal library and three
  years for cabal-install: that is, the Cabal library must be
  buildable out-of-the-box with the dependencies that shipped with GHC
  for at least five years.  GitHub Actions checks this, so most
  developers submit a PR to see if their code works on all these
  versions of GHC.  `cabal-install` must also be buildable on all
  supported GHCs, although it does not have to be buildable
  out-of-the-box. Instead, the `cabal-install/bootstrap.sh` script
  must be able to download and install all of the dependencies (this
  is also checked by CI). Also, self-upgrade to the latest version
  (i.e. `cabal install cabal-install`) must work with all versions of
  `cabal-install` released during the last three years.

* `Cabal` has its own Prelude, in `Distribution.Compat.Prelude`,
  that provides a compatibility layer and exports some commonly
  used additional functions. Use it in all new modules.

* As far as possible, please do not use CPP. If you must use it,
  try to put it in a `Compat` module, and minimize the amount of code
  that is enclosed by CPP.  For example, prefer:
  ```
  f :: Int -> Int
  #ifdef mingw32_HOST_OS
  f = (+1)
  #else
  f = (+2)
  #endif
  ```

  over:
  ```
  #ifdef mingw32_HOST_OS
  f :: Int -> Int
  f = (+1)
  #else
  f :: Int -> Int
  f = (+2)
  #endif
  ```

## GitHub Ticket Conventions

Each major `Cabal`/`cabal-install` release (e.g. 3.4, 3.6, etc.) has a
corresponding GitHub Project and milestone. A ticket is included in a release's
project if the release managers are tentatively planning on including a fix for
the ticket in the release, i.e. if they are actively seeking someone to work on
the ticket.

By contrast, a ticket is milestoned to a given release if we are open to
accepting a fix in that release, i.e. we would very much appreciate someone
working on it, but are not committing to actively sourcing someone to work on
it.

## GitHub Pull Request Conventions

Every (non-backport) pull request has to go through a review and get 2
approvals. After this is done, the author of the pull request is expected to add
any final touches they deem important and put the `merge me` label on the pull
request. If the author lacks permissions to apply labels, they are welcome to
explicitly signal the merge intent on the discussion thread of the pull request,
at which point others (e.g., reviewers) apply the label. Merge buttons are
reserved for exceptional situations, e.g., CI fixes being iterated on or
backports/patches that need to be expedited for a release.

Currently there is a 2 day buffer for potential extra feedback between the last
update of a pull request (e.g. a commit, a rebase, an addition of the `merge me`
label) and the moment the Mergify bot picks up the pull request for a merge.

If your pull request consists of several commits, consider using `squash+merge
me` instead of `merge me`: the Mergify bot will squash all the commits into one
and concatenate the commit messages of the commits before merging.

There is also a `merge+no rebase` label. Use this very sparingly, as not rebasing
severely complicates Git history. It is intended for special circumstances, as when
the PR branch cannot or should not be modified. If you have any questions about it,
please ask us.

### Pull Requests & Issues

A pull request *fixes* a problem that is *described* in an issue. Make sure to
file an issue before opening a pull request. In the issue you can illustrate
your proposed design, UX considerations, tradeoffs etc. and work them out with
other contributors. The PR itself is for implementation.

If a PR becomes out of sync with its issue, go back to the issue, update
it, and continue the conversation there. Telltale signs of Issue/PR diverging
are, for example: the PR growing bigger in scope; lengthy discussions
about things that are *not* implementation choices; a change in design.

If your PR is trivial you can omit this process (but explain in the PR why you
think it does not warrant an issue). Feel free to open a new issue (or new
issues) when appropriate.


## Changelog

Anything that changes `cabal-install:exe:cabal` or changes exports from library
modules or changes behaviour of functions exported from packages published to
hackage is a <a id="user-visible-change">user-visible change</a>. Raising the
lower bound on `base` is most definitely a user-visible change because it
excludes versions of GHC from being able to build these packages.

When opening a pull request with a user-visible change, you should write one
changelog entry (or more in case of multiple independent changes) — the
information will end up in our release notes.

Changelogs for the next release are stored in the `changelog.d` directory.
The files follow a simple key-value format similar to the one for `.cabal` files.
Free-form text fields (`synopsis` and `description`) allow Markdown markup — please,
use markup to make our release notes more readable.

Here's an example:

```cabal
synopsis: Add feature xyz
packages: cabal-install
prs: #0000
issues: #0000 #0000
significance: significant

description: {

- Detail number 1
- Detail number 2

}
```

Changelogs may also be written in "markdown-frontmatter" format. This is useful if your
description contains braces, which must be escaped with backslashes in `.cabal` file
format.

```markdown
---
synopsis: Add feature xyz
packages: [cabal-install]
prs: #0000
issues: #0000 #0000
significance: significant
---

- Detail number 1
- Detail number 2

```
The package list must be enclosed in square brackets and comma-separated, but this isn't needed for `prs` or `issues`.

Only the `synopsis` and `prs` fields are required, but you should also set the others where applicable.

| Field          | Description                                                                                                        |
| -----          | -----------                                                                                                        |
| `synopsis`     | Brief description of the change. Often just the pr title.                                                          |
| `description`  | Longer description, with a list of sub-changes. Not needed for small/atomic changes.                               |
| `packages`     | Packages affected by the change (`cabal-install`, `Cabal`...). Omit if it's a non-package change.                  |
| `prs`          | Space-separated hash-prefixed pull request numbers containing the change (usually just one).                       |
| `issues`       | Space-separated hash-prefixed issue numbers that the change fixes/closes/affects.                                  |
| `significance` | Set to `significant` if the change is significant, that is if it warrants being put near the top of the changelog. |

You can find a large number of real-world examples of changelog files
[here](https://github.com/haskell/cabal/tree/bc83de27569fda22dbe1e10be1a921bebf4d3430/changelog.d).

At release time, the entries will be merged with
[this tool](https://github.com/fgaz/changelog-d).

In addition, if you're changing the `.cabal` file format specification you should
add an entry in `doc/file-format-changelog.rst`.

## Communicating

There are a few main venues of communication:

* Most developers subscribe to receive messages from [all issues](https://github.com/haskell/cabal/issues); issues can be used to [open discussion](https://github.com/haskell/cabal/issues?q=is%3Aissue+is%3Aopen+custom+label%3A%22type%3A+discussion%22).  If you know someone who should hear about a message, CC them explicitly using the @username GitHub syntax.

* For more organizational concerns, the [mailing
  list](http://www.haskell.org/mailman/listinfo/cabal-devel) is used.

* Many developers idle on `#hackage` on [`irc.libera.chat`](https://libera.chat). The `#ghc` channel is also a decently good bet.
  * You can join the channel using a web client, even anonymously: https://web.libera.chat/#hackage
  * Alternatively you can join it using [matrix](https://matrix.org/): https://matrix.to/#/#hackage:matrix.org

## Releases

Notes for how to make a release are at the
wiki page ["Making a release"](https://github.com/haskell/cabal/wiki/Making-a-release).
Currently, [@emilypi](https://github.com/emilypi), [@fgaz](https://github.com/fgaz) and [@Mikolaj](https://github.com/Mikolaj) have access to
`haskell.org/cabal`, and [@Mikolaj](https://github.com/Mikolaj) is the point of contact for getting
permissions.

## Preview Releases

We make preview releases available to facilitate testing of development builds.

Artifacts can be found on the [`cabal-head` release page](https://github.com/haskell/cabal/releases/tag/cabal-head).
The Validate CI pipeline generates tarballs with a `cabal` executable. The executable gets uploaded to this release by the pipelines that run on `master`.

We currently make available builds for:
  - Linux, dynamically linked (requiring `zlib`, `gmp`, `glibc`)
  - Linux, statically linked
  - MacOS
  - Windows

The statically linked Linux executables are built using Alpine.
To reproduce these locally, set up an Alpine build environment using GHCup,
and then build by calling `cabal build cabal-install --enable-executable-static`.


## API Documentation

Auto-generated API documentation for the `master` branch of Cabal is automatically uploaded here: http://haskell.github.io/cabal-website/doc/html/Cabal/.

## Issue triage [![Open Source Helpers](https://www.codetriage.com/haskell/cabal/badges/users.svg)](https://www.codetriage.com/haskell/cabal)

You can contribute by triaging issues which may include reproducing bug reports or asking for vital information, such as version numbers or reproduction instructions. If you would like to start triaging issues, one easy way to get started is to [subscribe to cabal on CodeTriage](https://www.codetriage.com/haskell/cabal).

## Hackage Revisions

We are reactive rather than proactive with revising bounds on our dependencies
for code already released on Hackage. If you would benefit from a version bump,
please, open a ticket and get familiar with
[our revision policy](https://github.com/haskell/cabal/issues/9531#issuecomment-1866930240).

The burden of proof that the bump is harmless remains with you, but we have a CI
setup to show that our main pipeline ("Validate") is fine with the bump. To use
it, someone with enough permissions needs to go on the
[Validate workflow page](https://github.com/haskell/cabal/actions/workflows/validate.yml)
and dispatch it manually by clicking "Run workflow".

Running workflow manually as discussed above allows you to supply two inputs:

> allow-newer line
> constraints line

Going via an example, imagine that Cabal only allows `tar` or version less then
or equal to 0.6, and you want to bump it to 0.6. Then, to show that Validate
succeeds with `tar` 0.6, you should input

- `tar` to the "allow-newer line"
- `tar ==0.6` to the "constraints line"

Hopefully, running the Validate pipeline with these inputs succeeds and you
supply the link to the run in the ticket about bumping the bound and making a revision.

If interested in technical details, refer to the parts of `validate.yml` that
mention `hackage-revisions`.