Stops the crash happening for maximize-mode / multi-display / overview
[chromium-blink-merge.git] / courgette / streams.cc
blobfcac593e9c0af0034b731b77fc964fa1446b96c4
1 // Copyright (c) 2011 The Chromium Authors. All rights reserved.
2 // Use of this source code is governed by a BSD-style license that can be
3 // found in the LICENSE file.
5 // Streams classes.
6 //
7 // These memory-resident streams are used for serializing data into a sequential
8 // region of memory.
9 //
10 // Streams are divided into SourceStreams for reading and SinkStreams for
11 // writing. Streams are aggregated into Sets which allows several streams to be
12 // used at once. Example: we can write A1, B1, A2, B2 but achieve the memory
13 // layout A1 A2 B1 B2 by writing 'A's to one stream and 'B's to another.
15 // The aggregated streams are important to Courgette's compression efficiency,
16 // we use it to cluster similar kinds of data which helps to generate longer
17 // common subsequences and repeated sequences.
19 #include "courgette/streams.h"
21 #include <memory.h>
23 #include "base/basictypes.h"
24 #include "base/logging.h"
26 namespace courgette {
28 // Update this version number if the serialization format of a StreamSet
29 // changes.
30 static const unsigned int kStreamsSerializationFormatVersion = 20090218;
33 // This is a cut down Varint implementation, implementing only what we use for
34 // streams.
36 class Varint {
37 public:
38 // Maximum lengths of varint encoding of uint32
39 static const int kMax32 = 5;
41 // Parses a Varint32 encoded value from |source| and stores it in |output|,
42 // and returns a pointer to the following byte. Returns NULL if a valid
43 // varint value was not found before |limit|.
44 static const uint8* Parse32WithLimit(const uint8* source, const uint8* limit,
45 uint32* output);
47 // Writes the Varint32 encoded representation of |value| to buffer
48 // |destination|. |destination| must have sufficient length to hold kMax32
49 // bytes. Returns a pointer to the byte just past the last encoded byte.
50 static uint8* Encode32(uint8* destination, uint32 value);
53 // Parses a Varint32 encoded unsigned number from |source|. The Varint32
54 // encoding is a little-endian sequence of bytes containing base-128 digits,
55 // with the high order bit set to indicate if there are more digits.
57 // For each byte, we mask out the digit and 'or' it into the right place in the
58 // result.
60 // The digit loop is unrolled for performance. It usually exits after the first
61 // one or two digits.
62 const uint8* Varint::Parse32WithLimit(const uint8* source,
63 const uint8* limit,
64 uint32* output) {
65 uint32 digit, result;
66 if (source >= limit)
67 return NULL;
68 digit = *(source++);
69 result = digit & 127;
70 if (digit < 128) {
71 *output = result;
72 return source;
75 if (source >= limit)
76 return NULL;
77 digit = *(source++);
78 result |= (digit & 127) << 7;
79 if (digit < 128) {
80 *output = result;
81 return source;
84 if (source >= limit)
85 return NULL;
86 digit = *(source++);
87 result |= (digit & 127) << 14;
88 if (digit < 128) {
89 *output = result;
90 return source;
93 if (source >= limit)
94 return NULL;
95 digit = *(source++);
96 result |= (digit & 127) << 21;
97 if (digit < 128) {
98 *output = result;
99 return source;
102 if (source >= limit)
103 return NULL;
104 digit = *(source++);
105 result |= (digit & 127) << 28;
106 if (digit < 128) {
107 *output = result;
108 return source;
111 return NULL; // Value is too long to be a Varint32.
114 // Write the base-128 digits in little-endian order. All except the last digit
115 // have the high bit set to indicate more digits.
116 inline uint8* Varint::Encode32(uint8* destination, uint32 value) {
117 while (value >= 128) {
118 *(destination++) = static_cast<uint8>(value) | 128;
119 value = value >> 7;
121 *(destination++) = static_cast<uint8>(value);
122 return destination;
125 void SourceStream::Init(const SinkStream& sink) {
126 Init(sink.Buffer(), sink.Length());
129 bool SourceStream::Read(void* destination, size_t count) {
130 if (current_ + count > end_)
131 return false;
132 memcpy(destination, current_, count);
133 current_ += count;
134 return true;
137 bool SourceStream::ReadVarint32(uint32* output_value) {
138 const uint8* after = Varint::Parse32WithLimit(current_, end_, output_value);
139 if (!after)
140 return false;
141 current_ = after;
142 return true;
145 bool SourceStream::ReadVarint32Signed(int32* output_value) {
146 // Signed numbers are encoded as unsigned numbers so that numbers nearer zero
147 // have shorter varint encoding.
148 // 0000xxxx encoded as 000xxxx0.
149 // 1111xxxx encoded as 000yyyy1 where yyyy is complement of xxxx.
150 uint32 unsigned_value;
151 if (!ReadVarint32(&unsigned_value))
152 return false;
153 if (unsigned_value & 1)
154 *output_value = ~static_cast<int32>(unsigned_value >> 1);
155 else
156 *output_value = (unsigned_value >> 1);
157 return true;
160 bool SourceStream::ShareSubstream(size_t offset, size_t length,
161 SourceStream* substream) {
162 if (offset > Remaining())
163 return false;
164 if (length > Remaining() - offset)
165 return false;
166 substream->Init(current_ + offset, length);
167 return true;
170 bool SourceStream::ReadSubstream(size_t length, SourceStream* substream) {
171 if (!ShareSubstream(0, length, substream))
172 return false;
173 current_ += length;
174 return true;
177 bool SourceStream::Skip(size_t byte_count) {
178 if (current_ + byte_count > end_)
179 return false;
180 current_ += byte_count;
181 return true;
184 CheckBool SinkStream::Write(const void* data, size_t byte_count) {
185 return buffer_.append(static_cast<const char*>(data), byte_count);
188 CheckBool SinkStream::WriteVarint32(uint32 value) {
189 uint8 buffer[Varint::kMax32];
190 uint8* end = Varint::Encode32(buffer, value);
191 return Write(buffer, end - buffer);
194 CheckBool SinkStream::WriteVarint32Signed(int32 value) {
195 // Encode signed numbers so that numbers nearer zero have shorter
196 // varint encoding.
197 // 0000xxxx encoded as 000xxxx0.
198 // 1111xxxx encoded as 000yyyy1 where yyyy is complement of xxxx.
199 bool ret;
200 if (value < 0)
201 ret = WriteVarint32(~value * 2 + 1);
202 else
203 ret = WriteVarint32(value * 2);
204 return ret;
207 CheckBool SinkStream::WriteSizeVarint32(size_t value) {
208 uint32 narrowed_value = static_cast<uint32>(value);
209 // On 32-bit, the compiler should figure out this test always fails.
210 LOG_ASSERT(value == narrowed_value);
211 return WriteVarint32(narrowed_value);
214 CheckBool SinkStream::Append(SinkStream* other) {
215 bool ret = Write(other->buffer_.data(), other->buffer_.size());
216 if (ret)
217 other->Retire();
218 return ret;
221 void SinkStream::Retire() {
222 buffer_.clear();
225 ////////////////////////////////////////////////////////////////////////////////
227 SourceStreamSet::SourceStreamSet()
228 : count_(kMaxStreams) {
231 SourceStreamSet::~SourceStreamSet() {
235 // Initializes from |source|.
236 // The stream set for N streams is serialized as a header
237 // <version><N><length1><length2>...<lengthN>
238 // followed by the stream contents
239 // <bytes1><bytes2>...<bytesN>
241 bool SourceStreamSet::Init(const void* source, size_t byte_count) {
242 const uint8* start = static_cast<const uint8*>(source);
243 const uint8* end = start + byte_count;
245 unsigned int version;
246 const uint8* finger = Varint::Parse32WithLimit(start, end, &version);
247 if (finger == NULL)
248 return false;
249 if (version != kStreamsSerializationFormatVersion)
250 return false;
252 unsigned int count;
253 finger = Varint::Parse32WithLimit(finger, end, &count);
254 if (finger == NULL)
255 return false;
256 if (count > kMaxStreams)
257 return false;
259 count_ = count;
261 unsigned int lengths[kMaxStreams];
262 size_t accumulated_length = 0;
264 for (size_t i = 0; i < count_; ++i) {
265 finger = Varint::Parse32WithLimit(finger, end, &lengths[i]);
266 if (finger == NULL)
267 return false;
268 accumulated_length += lengths[i];
271 // Remaining bytes should add up to sum of lengths.
272 if (static_cast<size_t>(end - finger) != accumulated_length)
273 return false;
275 accumulated_length = finger - start;
276 for (size_t i = 0; i < count_; ++i) {
277 stream(i)->Init(start + accumulated_length, lengths[i]);
278 accumulated_length += lengths[i];
281 return true;
284 bool SourceStreamSet::Init(SourceStream* source) {
285 // TODO(sra): consume the rest of |source|.
286 return Init(source->Buffer(), source->Remaining());
289 bool SourceStreamSet::ReadSet(SourceStreamSet* set) {
290 uint32 stream_count = 0;
291 SourceStream* control_stream = this->stream(0);
292 if (!control_stream->ReadVarint32(&stream_count))
293 return false;
295 uint32 lengths[kMaxStreams] = {}; // i.e. all zero.
297 for (size_t i = 0; i < stream_count; ++i) {
298 if (!control_stream->ReadVarint32(&lengths[i]))
299 return false;
302 for (size_t i = 0; i < stream_count; ++i) {
303 if (!this->stream(i)->ReadSubstream(lengths[i], set->stream(i)))
304 return false;
306 return true;
309 bool SourceStreamSet::Empty() const {
310 for (size_t i = 0; i < count_; ++i) {
311 if (streams_[i].Remaining() != 0)
312 return false;
314 return true;
317 ////////////////////////////////////////////////////////////////////////////////
319 SinkStreamSet::SinkStreamSet()
320 : count_(kMaxStreams) {
323 SinkStreamSet::~SinkStreamSet() {
326 void SinkStreamSet::Init(size_t stream_index_limit) {
327 count_ = stream_index_limit;
330 // The header for a stream set for N streams is serialized as
331 // <version><N><length1><length2>...<lengthN>
332 CheckBool SinkStreamSet::CopyHeaderTo(SinkStream* header) {
333 bool ret = header->WriteVarint32(kStreamsSerializationFormatVersion);
334 if (ret) {
335 ret = header->WriteSizeVarint32(count_);
336 for (size_t i = 0; ret && i < count_; ++i) {
337 ret = header->WriteSizeVarint32(stream(i)->Length());
340 return ret;
343 // Writes |this| to |combined_stream|. See SourceStreamSet::Init for the layout
344 // of the stream metadata and contents.
345 CheckBool SinkStreamSet::CopyTo(SinkStream *combined_stream) {
346 SinkStream header;
347 bool ret = CopyHeaderTo(&header);
348 if (!ret)
349 return ret;
351 // Reserve the correct amount of storage.
352 size_t length = header.Length();
353 for (size_t i = 0; i < count_; ++i) {
354 length += stream(i)->Length();
356 ret = combined_stream->Reserve(length);
357 if (ret) {
358 ret = combined_stream->Append(&header);
359 for (size_t i = 0; ret && i < count_; ++i) {
360 ret = combined_stream->Append(stream(i));
363 return ret;
366 CheckBool SinkStreamSet::WriteSet(SinkStreamSet* set) {
367 uint32 lengths[kMaxStreams];
368 // 'stream_count' includes all non-empty streams and all empty stream numbered
369 // lower than a non-empty stream.
370 size_t stream_count = 0;
371 for (size_t i = 0; i < kMaxStreams; ++i) {
372 SinkStream* stream = set->stream(i);
373 lengths[i] = static_cast<uint32>(stream->Length());
374 if (lengths[i] > 0)
375 stream_count = i + 1;
378 SinkStream* control_stream = this->stream(0);
379 bool ret = control_stream->WriteSizeVarint32(stream_count);
380 for (size_t i = 0; ret && i < stream_count; ++i) {
381 ret = control_stream->WriteSizeVarint32(lengths[i]);
384 for (size_t i = 0; ret && i < stream_count; ++i) {
385 ret = this->stream(i)->Append(set->stream(i));
387 return ret;
390 } // namespace