skia/config/SkUserConfig.h

   1 /*
   2  * Copyright (C) 2006 The Android Open Source Project
   3  *
   4  * Licensed under the Apache License, Version 2.0 (the "License");
   5  * you may not use this file except in compliance with the License.
   6  * You may obtain a copy of the License at
   7  *
   8  *      http://www.apache.org/licenses/LICENSE-2.0
   9  *
  10  * Unless required by applicable law or agreed to in writing, software
  11  * distributed under the License is distributed on an "AS IS" BASIS,
  12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13  * See the License for the specific language governing permissions and
  14  * limitations under the License.
  15  */
  16
  17 #ifndef SkUserConfig_DEFINED
  18 #define SkUserConfig_DEFINED
  19
  20 /*  SkTypes.h, the root of the public header files, does the following trick:
  21
  22     #include <SkPreConfig.h>
  23     #include <SkUserConfig.h>
  24     #include <SkPostConfig.h>
  25
  26     SkPreConfig.h runs first, and it is responsible for initializing certain
  27     skia defines.
  28
  29     SkPostConfig.h runs last, and its job is to just check that the final
  30     defines are consistent (i.e. that we don't have mutually conflicting
  31     defines).
  32
  33     SkUserConfig.h (this file) runs in the middle. It gets to change or augment
  34     the list of flags initially set in preconfig, and then postconfig checks
  35     that everything still makes sense.
  36
  37     Below are optional defines that add, subtract, or change default behavior
  38     in Skia. Your port can locally edit this file to enable/disable flags as
  39     you choose, or these can be delared on your command line (i.e. -Dfoo).
  40
  41     By default, this include file will always default to having all of the flags
  42     commented out, so including it will have no effect.
  43 */
  44
  45 ///////////////////////////////////////////////////////////////////////////////
  46
  47 /*  Scalars (the fractional value type in skia) can be implemented either as
  48     floats or 16.16 integers (fixed). Exactly one of these two symbols must be
  49     defined.
  50 */
  51 //#define SK_SCALAR_IS_FLOAT
  52 //#define SK_SCALAR_IS_FIXED
  53
  54
  55 /*  Somewhat independent of how SkScalar is implemented, Skia also wants to know
  56     if it can use floats at all. Naturally, if SK_SCALAR_IS_FLOAT is defined,
  57     then so muse SK_CAN_USE_FLOAT, but if scalars are fixed, SK_CAN_USE_FLOAT
  58     can go either way.
  59  */
  60 //#define SK_CAN_USE_FLOAT
  61
  62 /*  For some performance-critical scalar operations, skia will optionally work
  63     around the standard float operators if it knows that the CPU does not have
  64     native support for floats. If your environment uses software floating point,
  65     define this flag.
  66  */
  67 //#define SK_SOFTWARE_FLOAT
  68
  69
  70 /*  Skia has lots of debug-only code. Often this is just null checks or other
  71     parameter checking, but sometimes it can be quite intrusive (e.g. check that
  72     each 32bit pixel is in premultiplied form). This code can be very useful
  73     during development, but will slow things down in a shipping product.
  74
  75     By default, these mutually exclusive flags are defined in SkPreConfig.h,
  76     based on the presence or absence of NDEBUG, but that decision can be changed
  77     here.
  78  */
  79 //#define SK_DEBUG
  80 //#define SK_RELEASE
  81
  82 #ifdef DCHECK_ALWAYS_ON
  83     #undef SK_RELEASE
  84     #define SK_DEBUG
  85 #endif
  86
  87 /*  If, in debugging mode, Skia needs to stop (presumably to invoke a debugger)
  88     it will call SK_CRASH(). If this is not defined it, it is defined in
  89     SkPostConfig.h to write to an illegal address
  90  */
  91 //#define SK_CRASH() *(int *)(uintptr_t)0 = 0
  92
  93
  94 /*  preconfig will have attempted to determine the endianness of the system,
  95     but you can change these mutually exclusive flags here.
  96  */
  97 //#define SK_CPU_BENDIAN
  98 //#define SK_CPU_LENDIAN
  99
 100
 101 /*  Some compilers don't support long long for 64bit integers. If yours does
 102     not, define this to the appropriate type.
 103  */
 104 //#define SkLONGLONG int64_t
 105
 106
 107 /*  Some envorinments do not suport writable globals (eek!). If yours does not,
 108     define this flag.
 109  */
 110 //#define SK_USE_RUNTIME_GLOBALS
 111
 112 /*  If zlib is available and you want to support the flate compression
 113     algorithm (used in PDF generation), define SK_ZLIB_INCLUDE to be the
 114     include path.
 115  */
 116 //#define SK_ZLIB_INCLUDE <zlib.h>
 117 #define SK_ZLIB_INCLUDE "third_party/zlib/zlib.h"
 118
 119 /*  Define this to allow PDF scalars above 32k.  The PDF/A spec doesn't allow
 120     them, but modern PDF interpreters should handle them just fine.
 121  */
 122 //#define SK_ALLOW_LARGE_PDF_SCALARS
 123
 124 /*  Define this to provide font subsetter for font subsetting when generating
 125     PDF documents.
 126  */
 127 #define SK_SFNTLY_SUBSETTER \
 128     "third_party/sfntly/cpp/src/sample/chromium/font_subsetter.h"
 129
 130 /*  To write debug messages to a console, skia will call SkDebugf(...) following
 131     printf conventions (e.g. const char* format, ...). If you want to redirect
 132     this to something other than printf, define yours here
 133  */
 134 //#define SkDebugf(...)  MyFunction(__VA_ARGS__)
 135
 136
 137 /*  If SK_DEBUG is defined, then you can optionally define SK_SUPPORT_UNITTEST
 138     which will run additional self-tests at startup. These can take a long time,
 139     so this flag is optional.
 140  */
 141 #ifdef SK_DEBUG
 142 #define SK_SUPPORT_UNITTEST
 143 #endif
 144
 145 /* If cross process SkPictureImageFilters are not explicitly enabled then
 146    they are always disabled.
 147  */
 148 #ifndef SK_ALLOW_CROSSPROCESS_PICTUREIMAGEFILTERS
 149     #ifndef SK_DISALLOW_CROSSPROCESS_PICTUREIMAGEFILTERS
 150         #define SK_DISALLOW_CROSSPROCESS_PICTUREIMAGEFILTERS
 151     #endif
 152 #endif
 153
 154
 155 /* If your system embeds skia and has complex event logging, define this
 156    symbol to name a file that maps the following macros to your system's
 157    equivalents:
 158        SK_TRACE_EVENT0(event)
 159        SK_TRACE_EVENT1(event, name1, value1)
 160        SK_TRACE_EVENT2(event, name1, value1, name2, value2)
 161    src/utils/SkDebugTrace.h has a trivial implementation that writes to
 162    the debug output stream. If SK_USER_TRACE_INCLUDE_FILE is not defined,
 163    SkTrace.h will define the above three macros to do nothing.
 164 */
 165 #undef SK_USER_TRACE_INCLUDE_FILE
 166
 167 // ===== Begin Chrome-specific definitions =====
 168
 169 #ifdef SK_DEBUG
 170 #define SK_REF_CNT_MIXIN_INCLUDE "sk_ref_cnt_ext_debug.h"
 171 #else
 172 #define SK_REF_CNT_MIXIN_INCLUDE "sk_ref_cnt_ext_release.h"
 173 #endif
 174
 175 #define SK_SCALAR_IS_FLOAT
 176 #undef SK_SCALAR_IS_FIXED
 177
 178 #define SK_MSCALAR_IS_FLOAT
 179 #undef SK_MSCALAR_IS_DOUBLE
 180
 181 #define GR_MAX_OFFSCREEN_AA_DIM     512
 182
 183 // Log the file and line number for assertions.
 184 #define SkDebugf(...) SkDebugf_FileLine(__FILE__, __LINE__, false, __VA_ARGS__)
 185 SK_API void SkDebugf_FileLine(const char* file, int line, bool fatal,
 186                               const char* format, ...);
 187
 188 // Marking the debug print as "fatal" will cause a debug break, so we don't need
 189 // a separate crash call here.
 190 #define SK_DEBUGBREAK(cond) do { if (!(cond)) { \
 191     SkDebugf_FileLine(__FILE__, __LINE__, true, \
 192     "%s:%d: failed assertion \"%s\"\n", \
 193     __FILE__, __LINE__, #cond); } } while (false)
 194
 195 #if !defined(ANDROID)   // On Android, we use the skia default settings.
 196 #define SK_A32_SHIFT    24
 197 #define SK_R32_SHIFT    16
 198 #define SK_G32_SHIFT    8
 199 #define SK_B32_SHIFT    0
 200 #endif
 201
 202 #if defined(SK_BUILD_FOR_WIN32)
 203
 204 #define SK_BUILD_FOR_WIN
 205
 206 // Skia uses this deprecated bzero function to fill zeros into a string.
 207 #define bzero(str, len) memset(str, 0, len)
 208
 209 #elif defined(SK_BUILD_FOR_MAC)
 210
 211 #define SK_CPU_LENDIAN
 212 #undef  SK_CPU_BENDIAN
 213
 214 #elif defined(SK_BUILD_FOR_UNIX) || defined(SK_BUILD_FOR_ANDROID)
 215
 216 // Prefer FreeType's emboldening algorithm to Skia's
 217 // TODO: skia used to just use hairline, but has improved since then, so
 218 // we should revisit this choice...
 219 #define SK_USE_FREETYPE_EMBOLDEN
 220
 221 #if defined(SK_BUILD_FOR_UNIX) && defined(SK_CPU_BENDIAN)
 222 // Above we set the order for ARGB channels in registers. I suspect that, on
 223 // big endian machines, you can keep this the same and everything will work.
 224 // The in-memory order will be different, of course, but as long as everything
 225 // is reading memory as words rather than bytes, it will all work. However, if
 226 // you find that colours are messed up I thought that I would leave a helpful
 227 // locator for you. Also see the comments in
 228 // base/gfx/bitmap_platform_device_linux.h
 229 #error Read the comment at this location
 230 #endif
 231
 232 #endif
 233
 234 // The default crash macro writes to badbeef which can cause some strange
 235 // problems. Instead, pipe this through to the logging function as a fatal
 236 // assertion.
 237 #define SK_CRASH() SkDebugf_FileLine(__FILE__, __LINE__, true, "SK_CRASH")
 238
 239 // These flags are no longer defined in Skia, but we have them (temporarily)
 240 // until we update our call-sites (typically these are for API changes).
 241 //
 242 // Remove these as we update our sites.
 243 //
 244 #ifndef    SK_SUPPORT_LEGACY_GETTOPDEVICE
 245 #   define SK_SUPPORT_LEGACY_GETTOPDEVICE
 246 #endif
 247
 248 #ifndef    SK_SUPPORT_LEGACY_IMAGEFILTER_CTM
 249 #   define SK_SUPPORT_LEGACY_IMAGEFILTER_CTM
 250 #endif
 251
 252 #ifndef    SK_SUPPORT_LEGACY_GETDEVICE
 253 #   define SK_SUPPORT_LEGACY_GETDEVICE
 254 #endif
 255
 256 #ifndef    SK_IGNORE_ETC1_SUPPORT
 257 #   define SK_IGNORE_ETC1_SUPPORT
 258 #endif
 259
 260 #ifndef    SK_SUPPORT_LEGACY_IMAGEFILTER_TRANSFORM_SCRATCH_LAYTER
 261 #   define SK_SUPPORT_LEGACY_IMAGEFILTER_TRANSFORM_SCRATCH_LAYTER
 262 #endif
 263
 264 #ifndef    SK_IGNORE_GPU_DITHER
 265 #   define SK_IGNORE_GPU_DITHER
 266 #endif
 267
 268 #ifndef    SK_SUPPORT_LEGACY_UNBALANCED_PIXELREF_LOCKCOUNT
 269 #   define SK_SUPPORT_LEGACY_UNBALANCED_PIXELREF_LOCKCOUNT
 270 #endif
 271
 272 #ifndef    SK_SUPPORT_LEGACY_INT_COLORMATRIX
 273 #   define SK_SUPPORT_LEGACY_INT_COLORMATRIX
 274 #endif
 275
 276 ///////////////////////// Imported from BUILD.gn and skia_common.gypi
 277
 278 /* In some places Skia can use static initializers for global initialization,
 279  *  or fall back to lazy runtime initialization. Chrome always wants the latter.
 280  */
 281 #define SK_ALLOW_STATIC_GLOBAL_INITIALIZERS 0
 282
 283 /* Forcing the unoptimized path for the offset image filter in skia until
 284  * all filters used in Blink support the optimized path properly
 285  */
 286 #define SK_DISABLE_OFFSETIMAGEFILTER_OPTIMIZATION
 287
 288 /* This flag forces Skia not to use typographic metrics with GDI.
 289  */
 290 #define SK_GDI_ALWAYS_USE_TEXTMETRICS_FOR_FONT_METRICS
 291
 292 #define IGNORE_ROT_AA_RECT_OPT
 293 #define SK_IGNORE_BLURRED_RRECT_OPT
 294 #define SK_USE_DISCARDABLE_SCALEDIMAGECACHE
 295 #define SK_WILL_NEVER_DRAW_PERSPECTIVE_TEXT
 296
 297 #define SK_ATTR_DEPRECATED          SK_NOTHING_ARG1
 298 #define SK_ENABLE_INST_COUNT        0
 299 #define GR_GL_CUSTOM_SETUP_HEADER   "GrGLConfig_chrome.h"
 300
 301 // ===== End Chrome-specific definitions =====
 302
 303 #endif