third_party/sqlite/sqlite-src-3070603/src/test_mutex.c

   1 /*
   2 ** 2008 June 18
   3 **
   4 ** The author disclaims copyright to this source code.  In place of
   5 ** a legal notice, here is a blessing:
   6 **
   7 **    May you do good and not evil.
   8 **    May you find forgiveness for yourself and forgive others.
   9 **    May you share freely, never taking more than you give.
  10 **
  11 *************************************************************************
  12 ** This file contains test logic for the sqlite3_mutex interfaces.
  13 */
  14
  15 #include "tcl.h"
  16 #include "sqlite3.h"
  17 #include "sqliteInt.h"
  18 #include <stdlib.h>
  19 #include <assert.h>
  20 #include <string.h>
  21
  22 /* defined in test1.c */
  23 const char *sqlite3TestErrorName(int);
  24
  25 /* A countable mutex */
  26 struct sqlite3_mutex {
  27   sqlite3_mutex *pReal;
  28   int eType;
  29 };
  30
  31 /* State variables */
  32 static struct test_mutex_globals {
  33   int isInstalled;              /* True if installed */
  34   int disableInit;              /* True to cause sqlite3_initalize() to fail */
  35   int disableTry;               /* True to force sqlite3_mutex_try() to fail */
  36   int isInit;                   /* True if initialized */
  37   sqlite3_mutex_methods m;      /* Interface to "real" mutex system */
  38   int aCounter[8];              /* Number of grabs of each type of mutex */
  39   sqlite3_mutex aStatic[6];     /* The six static mutexes */
  40 } g = {0};
  41
  42 /* Return true if the countable mutex is currently held */
  43 static int counterMutexHeld(sqlite3_mutex *p){
  44   return g.m.xMutexHeld(p->pReal);
  45 }
  46
  47 /* Return true if the countable mutex is not currently held */
  48 static int counterMutexNotheld(sqlite3_mutex *p){
  49   return g.m.xMutexNotheld(p->pReal);
  50 }
  51
  52 /* Initialize the countable mutex interface
  53 ** Or, if g.disableInit is non-zero, then do not initialize but instead
  54 ** return the value of g.disableInit as the result code.  This can be used
  55 ** to simulate an initialization failure.
  56 */
  57 static int counterMutexInit(void){
  58   int rc;
  59   if( g.disableInit ) return g.disableInit;
  60   rc = g.m.xMutexInit();
  61   g.isInit = 1;
  62   return rc;
  63 }
  64
  65 /*
  66 ** Uninitialize the mutex subsystem
  67 */
  68 static int counterMutexEnd(void){
  69   g.isInit = 0;
  70   return g.m.xMutexEnd();
  71 }
  72
  73 /*
  74 ** Allocate a countable mutex
  75 */
  76 static sqlite3_mutex *counterMutexAlloc(int eType){
  77   sqlite3_mutex *pReal;
  78   sqlite3_mutex *pRet = 0;
  79
  80   assert( g.isInit );
  81   assert(eType<8 && eType>=0);
  82
  83   pReal = g.m.xMutexAlloc(eType);
  84   if( !pReal ) return 0;
  85
  86   if( eType==SQLITE_MUTEX_FAST || eType==SQLITE_MUTEX_RECURSIVE ){
  87     pRet = (sqlite3_mutex *)malloc(sizeof(sqlite3_mutex));
  88   }else{
  89     pRet = &g.aStatic[eType-2];
  90   }
  91
  92   pRet->eType = eType;
  93   pRet->pReal = pReal;
  94   return pRet;
  95 }
  96
  97 /*
  98 ** Free a countable mutex
  99 */
 100 static void counterMutexFree(sqlite3_mutex *p){
 101   assert( g.isInit );
 102   g.m.xMutexFree(p->pReal);
 103   if( p->eType==SQLITE_MUTEX_FAST || p->eType==SQLITE_MUTEX_RECURSIVE ){
 104     free(p);
 105   }
 106 }
 107
 108 /*
 109 ** Enter a countable mutex.  Block until entry is safe.
 110 */
 111 static void counterMutexEnter(sqlite3_mutex *p){
 112   assert( g.isInit );
 113   g.aCounter[p->eType]++;
 114   g.m.xMutexEnter(p->pReal);
 115 }
 116
 117 /*
 118 ** Try to enter a mutex.  Return true on success.
 119 */
 120 static int counterMutexTry(sqlite3_mutex *p){
 121   assert( g.isInit );
 122   g.aCounter[p->eType]++;
 123   if( g.disableTry ) return SQLITE_BUSY;
 124   return g.m.xMutexTry(p->pReal);
 125 }
 126
 127 /* Leave a mutex
 128 */
 129 static void counterMutexLeave(sqlite3_mutex *p){
 130   assert( g.isInit );
 131   g.m.xMutexLeave(p->pReal);
 132 }
 133
 134 /*
 135 ** sqlite3_shutdown
 136 */
 137 static int test_shutdown(
 138   void * clientData,
 139   Tcl_Interp *interp,
 140   int objc,
 141   Tcl_Obj *CONST objv[]
 142 ){
 143   int rc;
 144
 145   if( objc!=1 ){
 146     Tcl_WrongNumArgs(interp, 1, objv, "");
 147     return TCL_ERROR;
 148   }
 149
 150   rc = sqlite3_shutdown();
 151   Tcl_SetResult(interp, (char *)sqlite3TestErrorName(rc), TCL_VOLATILE);
 152   return TCL_OK;
 153 }
 154
 155 /*
 156 ** sqlite3_initialize
 157 */
 158 static int test_initialize(
 159   void * clientData,
 160   Tcl_Interp *interp,
 161   int objc,
 162   Tcl_Obj *CONST objv[]
 163 ){
 164   int rc;
 165
 166   if( objc!=1 ){
 167     Tcl_WrongNumArgs(interp, 1, objv, "");
 168     return TCL_ERROR;
 169   }
 170
 171   rc = sqlite3_initialize();
 172   Tcl_SetResult(interp, (char *)sqlite3TestErrorName(rc), TCL_VOLATILE);
 173   return TCL_OK;
 174 }
 175
 176 /*
 177 ** install_mutex_counters BOOLEAN
 178 */
 179 static int test_install_mutex_counters(
 180   void * clientData,
 181   Tcl_Interp *interp,
 182   int objc,
 183   Tcl_Obj *CONST objv[]
 184 ){
 185   int rc = SQLITE_OK;
 186   int isInstall;
 187
 188   sqlite3_mutex_methods counter_methods = {
 189     counterMutexInit,
 190     counterMutexEnd,
 191     counterMutexAlloc,
 192     counterMutexFree,
 193     counterMutexEnter,
 194     counterMutexTry,
 195     counterMutexLeave,
 196     counterMutexHeld,
 197     counterMutexNotheld
 198   };
 199
 200   if( objc!=2 ){
 201     Tcl_WrongNumArgs(interp, 1, objv, "BOOLEAN");
 202     return TCL_ERROR;
 203   }
 204   if( TCL_OK!=Tcl_GetBooleanFromObj(interp, objv[1], &isInstall) ){
 205     return TCL_ERROR;
 206   }
 207
 208   assert(isInstall==0 || isInstall==1);
 209   assert(g.isInstalled==0 || g.isInstalled==1);
 210   if( isInstall==g.isInstalled ){
 211     Tcl_AppendResult(interp, "mutex counters are ", 0);
 212     Tcl_AppendResult(interp, isInstall?"already installed":"not installed", 0);
 213     return TCL_ERROR;
 214   }
 215
 216   if( isInstall ){
 217     assert( g.m.xMutexAlloc==0 );
 218     rc = sqlite3_config(SQLITE_CONFIG_GETMUTEX, &g.m);
 219     if( rc==SQLITE_OK ){
 220       sqlite3_config(SQLITE_CONFIG_MUTEX, &counter_methods);
 221     }
 222     g.disableTry = 0;
 223   }else{
 224     assert( g.m.xMutexAlloc );
 225     rc = sqlite3_config(SQLITE_CONFIG_MUTEX, &g.m);
 226     memset(&g.m, 0, sizeof(sqlite3_mutex_methods));
 227   }
 228
 229   if( rc==SQLITE_OK ){
 230     g.isInstalled = isInstall;
 231   }
 232
 233   Tcl_SetResult(interp, (char *)sqlite3TestErrorName(rc), TCL_VOLATILE);
 234   return TCL_OK;
 235 }
 236
 237 /*
 238 ** read_mutex_counters
 239 */
 240 static int test_read_mutex_counters(
 241   void * clientData,
 242   Tcl_Interp *interp,
 243   int objc,
 244   Tcl_Obj *CONST objv[]
 245 ){
 246   Tcl_Obj *pRet;
 247   int ii;
 248   char *aName[8] = {
 249     "fast",        "recursive",   "static_master", "static_mem",
 250     "static_open", "static_prng", "static_lru",    "static_pmem"
 251   };
 252
 253   if( objc!=1 ){
 254     Tcl_WrongNumArgs(interp, 1, objv, "");
 255     return TCL_ERROR;
 256   }
 257
 258   pRet = Tcl_NewObj();
 259   Tcl_IncrRefCount(pRet);
 260   for(ii=0; ii<8; ii++){
 261     Tcl_ListObjAppendElement(interp, pRet, Tcl_NewStringObj(aName[ii], -1));
 262     Tcl_ListObjAppendElement(interp, pRet, Tcl_NewIntObj(g.aCounter[ii]));
 263   }
 264   Tcl_SetObjResult(interp, pRet);
 265   Tcl_DecrRefCount(pRet);
 266
 267   return TCL_OK;
 268 }
 269
 270 /*
 271 ** clear_mutex_counters
 272 */
 273 static int test_clear_mutex_counters(
 274   void * clientData,
 275   Tcl_Interp *interp,
 276   int objc,
 277   Tcl_Obj *CONST objv[]
 278 ){
 279   int ii;
 280
 281   if( objc!=1 ){
 282     Tcl_WrongNumArgs(interp, 1, objv, "");
 283     return TCL_ERROR;
 284   }
 285
 286   for(ii=0; ii<8; ii++){
 287     g.aCounter[ii] = 0;
 288   }
 289   return TCL_OK;
 290 }
 291
 292 /*
 293 ** Create and free a mutex.  Return the mutex pointer.  The pointer
 294 ** will be invalid since the mutex has already been freed.  The
 295 ** return pointer just checks to see if the mutex really was allocated.
 296 */
 297 static int test_alloc_mutex(
 298   void * clientData,
 299   Tcl_Interp *interp,
 300   int objc,
 301   Tcl_Obj *CONST objv[]
 302 ){
 303 #if SQLITE_THREADSAFE
 304   sqlite3_mutex *p = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST);
 305   char zBuf[100];
 306   sqlite3_mutex_free(p);
 307   sqlite3_snprintf(sizeof(zBuf), zBuf, "%p", p);
 308   Tcl_AppendResult(interp, zBuf, (char*)0);
 309 #endif
 310   return TCL_OK;
 311 }
 312
 313 /*
 314 ** sqlite3_config OPTION
 315 **
 316 ** OPTION can be either one of the keywords:
 317 **
 318 **            SQLITE_CONFIG_SINGLETHREAD
 319 **            SQLITE_CONFIG_MULTITHREAD
 320 **            SQLITE_CONFIG_SERIALIZED
 321 **
 322 ** Or OPTION can be an raw integer.
 323 */
 324 static int test_config(
 325   void * clientData,
 326   Tcl_Interp *interp,
 327   int objc,
 328   Tcl_Obj *CONST objv[]
 329 ){
 330   struct ConfigOption {
 331     const char *zName;
 332     int iValue;
 333   } aOpt[] = {
 334     {"singlethread", SQLITE_CONFIG_SINGLETHREAD},
 335     {"multithread",  SQLITE_CONFIG_MULTITHREAD},
 336     {"serialized",   SQLITE_CONFIG_SERIALIZED},
 337     {0, 0}
 338   };
 339   int s = sizeof(struct ConfigOption);
 340   int i;
 341   int rc;
 342
 343   if( objc!=2 ){
 344     Tcl_WrongNumArgs(interp, 1, objv, "");
 345     return TCL_ERROR;
 346   }
 347
 348   if( Tcl_GetIndexFromObjStruct(interp, objv[1], aOpt, s, "flag", 0, &i) ){
 349     if( Tcl_GetIntFromObj(interp, objv[1], &i) ){
 350       return TCL_ERROR;
 351     }
 352   }else{
 353     i = aOpt[i].iValue;
 354   }
 355
 356   rc = sqlite3_config(i);
 357   Tcl_SetResult(interp, (char *)sqlite3TestErrorName(rc), TCL_VOLATILE);
 358   return TCL_OK;
 359 }
 360
 361 static sqlite3 *getDbPointer(Tcl_Interp *pInterp, Tcl_Obj *pObj){
 362   sqlite3 *db;
 363   Tcl_CmdInfo info;
 364   char *zCmd = Tcl_GetString(pObj);
 365   if( Tcl_GetCommandInfo(pInterp, zCmd, &info) ){
 366     db = *((sqlite3 **)info.objClientData);
 367   }else{
 368     db = (sqlite3*)sqlite3TestTextToPtr(zCmd);
 369   }
 370   assert( db );
 371   return db;
 372 }
 373
 374 static int test_enter_db_mutex(
 375   void * clientData,
 376   Tcl_Interp *interp,
 377   int objc,
 378   Tcl_Obj *CONST objv[]
 379 ){
 380   sqlite3 *db;
 381   if( objc!=2 ){
 382     Tcl_WrongNumArgs(interp, 1, objv, "DB");
 383     return TCL_ERROR;
 384   }
 385   db = getDbPointer(interp, objv[1]);
 386   if( !db ){
 387     return TCL_ERROR;
 388   }
 389   sqlite3_mutex_enter(sqlite3_db_mutex(db));
 390   return TCL_OK;
 391 }
 392
 393 static int test_leave_db_mutex(
 394   void * clientData,
 395   Tcl_Interp *interp,
 396   int objc,
 397   Tcl_Obj *CONST objv[]
 398 ){
 399   sqlite3 *db;
 400   if( objc!=2 ){
 401     Tcl_WrongNumArgs(interp, 1, objv, "DB");
 402     return TCL_ERROR;
 403   }
 404   db = getDbPointer(interp, objv[1]);
 405   if( !db ){
 406     return TCL_ERROR;
 407   }
 408   sqlite3_mutex_leave(sqlite3_db_mutex(db));
 409   return TCL_OK;
 410 }
 411
 412 int Sqlitetest_mutex_Init(Tcl_Interp *interp){
 413   static struct {
 414     char *zName;
 415     Tcl_ObjCmdProc *xProc;
 416   } aCmd[] = {
 417     { "sqlite3_shutdown",        (Tcl_ObjCmdProc*)test_shutdown },
 418     { "sqlite3_initialize",      (Tcl_ObjCmdProc*)test_initialize },
 419     { "sqlite3_config",          (Tcl_ObjCmdProc*)test_config },
 420
 421     { "enter_db_mutex",          (Tcl_ObjCmdProc*)test_enter_db_mutex },
 422     { "leave_db_mutex",          (Tcl_ObjCmdProc*)test_leave_db_mutex },
 423
 424     { "alloc_dealloc_mutex",     (Tcl_ObjCmdProc*)test_alloc_mutex },
 425     { "install_mutex_counters",  (Tcl_ObjCmdProc*)test_install_mutex_counters },
 426     { "read_mutex_counters",     (Tcl_ObjCmdProc*)test_read_mutex_counters },
 427     { "clear_mutex_counters",    (Tcl_ObjCmdProc*)test_clear_mutex_counters },
 428   };
 429   int i;
 430   for(i=0; i<sizeof(aCmd)/sizeof(aCmd[0]); i++){
 431     Tcl_CreateObjCommand(interp, aCmd[i].zName, aCmd[i].xProc, 0, 0);
 432   }
 433
 434   Tcl_LinkVar(interp, "disable_mutex_init",
 435               (char*)&g.disableInit, TCL_LINK_INT);
 436   Tcl_LinkVar(interp, "disable_mutex_try",
 437               (char*)&g.disableTry, TCL_LINK_INT);
 438   return SQLITE_OK;
 439 }