Don't show supervised user as "already on this device" while they're being imported.
[chromium-blink-merge.git] / third_party / zlib / fill_window_sse.c
blob949ccce1ba9ccc83ceb07922428b22b6c8eb6ca1
1 /*
2 * Fill Window with SSE2-optimized hash shifting
4 * Copyright (C) 2013 Intel Corporation
5 * Authors:
6 * Arjan van de Ven <arjan@linux.intel.com>
7 * Jim Kukunas <james.t.kukunas@linux.intel.com>
9 * For conditions of distribution and use, see copyright notice in zlib.h
12 #include <immintrin.h>
13 #include "deflate.h"
15 #define UPDATE_HASH(s,h,i) \
17 if (s->level < 6) { \
18 h = (3483 * (s->window[i]) +\
19 23081* (s->window[i+1]) +\
20 6954 * (s->window[i+2]) +\
21 20947* (s->window[i+3])) & s->hash_mask;\
22 } else {\
23 h = (25881* (s->window[i]) +\
24 24674* (s->window[i+1]) +\
25 25811* (s->window[i+2])) & s->hash_mask;\
29 extern int read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
31 void fill_window_sse(deflate_state *s)
33 const __m128i xmm_wsize = _mm_set1_epi16(s->w_size);
35 register unsigned n;
36 register Posf *p;
37 unsigned more; /* Amount of free space at the end of the window. */
38 uInt wsize = s->w_size;
40 Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
42 do {
43 more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
45 /* Deal with !@#$% 64K limit: */
46 if (sizeof(int) <= 2) {
47 if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
48 more = wsize;
50 } else if (more == (unsigned)(-1)) {
51 /* Very unlikely, but possible on 16 bit machine if
52 * strstart == 0 && lookahead == 1 (input done a byte at time)
54 more--;
58 /* If the window is almost full and there is insufficient lookahead,
59 * move the upper half to the lower one to make room in the upper half.
61 if (s->strstart >= wsize+MAX_DIST(s)) {
63 zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
64 s->match_start -= wsize;
65 s->strstart -= wsize; /* we now have strstart >= MAX_DIST */
66 s->block_start -= (long) wsize;
68 /* Slide the hash table (could be avoided with 32 bit values
69 at the expense of memory usage). We slide even when level == 0
70 to keep the hash table consistent if we switch back to level > 0
71 later. (Using level 0 permanently is not an optimal usage of
72 zlib, so we don't care about this pathological case.)
74 n = s->hash_size;
75 p = &s->head[n];
76 p -= 8;
77 do {
78 __m128i value, result;
80 value = _mm_loadu_si128((__m128i *)p);
81 result = _mm_subs_epu16(value, xmm_wsize);
82 _mm_storeu_si128((__m128i *)p, result);
84 p -= 8;
85 n -= 8;
86 } while (n > 0);
88 n = wsize;
89 #ifndef FASTEST
90 p = &s->prev[n];
91 p -= 8;
92 do {
93 __m128i value, result;
95 value = _mm_loadu_si128((__m128i *)p);
96 result = _mm_subs_epu16(value, xmm_wsize);
97 _mm_storeu_si128((__m128i *)p, result);
99 p -= 8;
100 n -= 8;
101 } while (n > 0);
102 #endif
103 more += wsize;
105 if (s->strm->avail_in == 0) break;
107 /* If there was no sliding:
108 * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
109 * more == window_size - lookahead - strstart
110 * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
111 * => more >= window_size - 2*WSIZE + 2
112 * In the BIG_MEM or MMAP case (not yet supported),
113 * window_size == input_size + MIN_LOOKAHEAD &&
114 * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
115 * Otherwise, window_size == 2*WSIZE so more >= 2.
116 * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
118 Assert(more >= 2, "more < 2");
120 n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
121 s->lookahead += n;
123 /* Initialize the hash value now that we have some input: */
124 if (s->lookahead >= MIN_MATCH) {
125 uInt str = s->strstart;
126 s->ins_h = s->window[str];
127 if (str >= 1)
128 UPDATE_HASH(s, s->ins_h, str + 1 - (MIN_MATCH-1));
129 #if MIN_MATCH != 3
130 Call UPDATE_HASH() MIN_MATCH-3 more times
131 #endif
133 /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
134 * but this is not important since only literal bytes will be emitted.
137 } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
139 /* If the WIN_INIT bytes after the end of the current data have never been
140 * written, then zero those bytes in order to avoid memory check reports of
141 * the use of uninitialized (or uninitialised as Julian writes) bytes by
142 * the longest match routines. Update the high water mark for the next
143 * time through here. WIN_INIT is set to MAX_MATCH since the longest match
144 * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
146 if (s->high_water < s->window_size) {
147 ulg curr = s->strstart + (ulg)(s->lookahead);
148 ulg init;
150 if (s->high_water < curr) {
151 /* Previous high water mark below current data -- zero WIN_INIT
152 * bytes or up to end of window, whichever is less.
154 init = s->window_size - curr;
155 if (init > WIN_INIT)
156 init = WIN_INIT;
157 zmemzero(s->window + curr, (unsigned)init);
158 s->high_water = curr + init;
160 else if (s->high_water < (ulg)curr + WIN_INIT) {
161 /* High water mark at or above current data, but below current data
162 * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
163 * to end of window, whichever is less.
165 init = (ulg)curr + WIN_INIT - s->high_water;
166 if (init > s->window_size - s->high_water)
167 init = s->window_size - s->high_water;
168 zmemzero(s->window + s->high_water, (unsigned)init);
169 s->high_water += init;
173 Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
174 "not enough room for search");