1 // Copyright (c) 2012 The Chromium Authors. All rights reserved.
2 // Use of this source code is governed by a BSD-style license that can be
3 // found in the LICENSE file.
5 // Defining IPC Messages
7 // Your IPC messages will be defined by macros inside of an XXX_messages.h
8 // header file. Most of the time, the system can automatically generate all
9 // of messaging mechanism from these definitions, but sometimes some manual
10 // coding is required. In these cases, you will also have an XXX_messages.cc
11 // implemation file as well.
13 // The senders of your messages will include your XXX_messages.h file to
14 // get the full set of definitions they need to send your messages.
16 // Each XXX_messages.h file must be registered with the IPC system. This
17 // requires adding two things:
18 // - An XXXMsgStart value to the IPCMessageStart enum in ipc_message_start.h
19 // - An inclusion of XXX_messages.h file in a message generator .h file
21 // The XXXMsgStart value is an enumeration that ensures uniqueness for
22 // each different message file. Later, you will use this inside your
23 // XXX_messages.h file before invoking message declaration macros:
24 // #define IPC_MESSAGE_START XXXMsgStart
25 // ( ... your macro invocations go here ... )
27 // Message Generator Files
29 // A message generator .h header file pulls in all other message-declaring
30 // headers for a given component. It is included by a message generator
31 // .cc file, which is where all the generated code will wind up. Typically,
32 // you will use an existing generator (e.g. common_message_generator.cc
33 // in /chrome/common), but there are circumstances where you may add a
36 // In the rare cicrucmstances where you can't re-use an existing file,
37 // your YYY_message_generator.cc file for a component YYY would contain
38 // the following code:
39 // // Get basic type definitions.
40 // #define IPC_MESSAGE_IMPL
41 // #include "path/to/YYY_message_generator.h"
42 // // Generate constructors.
43 // #include "ipc/struct_constructor_macros.h"
44 // #include "path/to/YYY_message_generator.h"
45 // // Generate destructors.
46 // #include "ipc/struct_destructor_macros.h"
47 // #include "path/to/YYY_message_generator.h"
48 // // Generate param traits write methods.
49 // #include "ipc/param_traits_write_macros.h"
51 // #include "path/to/YYY_message_generator.h"
53 // // Generate param traits read methods.
54 // #include "ipc/param_traits_read_macros.h"
56 // #include "path/to/YYY_message_generator.h"
58 // // Generate param traits log methods.
59 // #include "ipc/param_traits_log_macros.h"
61 // #include "path/to/YYY_message_generator.h"
64 // In cases where manual generation is required, in your XXX_messages.cc
65 // file, put the following after all the includes for param types:
66 // #define IPC_MESSAGE_IMPL
67 // #include "XXX_messages.h"
68 // (... implementation of traits not auto-generated ...)
72 // The XXX_messages.h file will be multiply-included by the
73 // YYY_message_generator.cc file, so your XXX_messages file can't be
74 // guarded in the usual manner. Ideally, there will be no need for any
75 // inclusion guard, since the XXX_messages.h file should consist soley
76 // of inclusions of other headers (which are self-guarding) and IPC
77 // macros (which are multiply evaluating).
79 // Note that #pragma once cannot be used here; doing so would mark the whole
80 // file as being singly-included. Since your XXX_messages.h file is only
81 // partially-guarded, care must be taken to ensure that it is only included
82 // by other .cc files (and the YYY_message_generator.h file). Including an
83 // XXX_messages.h file in some other .h file may result in duplicate
84 // declarations and a compilation failure.
88 // It is generally a bad idea to have type definitions in a XXX_messages.h
89 // file; most likely the typedef will then be used in the message, as opposed
90 // to the struct iself. Later, an IPC message dispatcher wil need to call
91 // a function taking that type, and that function is declared in some other
92 // header. Thus, in order to get the type definition, the other header
93 // would have to include the XXX_messages.h file, violating the rule above
94 // about not including XXX_messages.h file in other .h files.
96 // One approach here is to move these type definitions to another (guarded)
97 // .h file and include this second .h in your XXX_messages.h file. This
98 // is still less than ideal, because the dispatched function would have to
99 // redeclare the typedef or include this second header. This may be
100 // reasonable in a few cases.
102 // Failing all of the above, then you will want to bracket the smallest
103 // possible section of your XXX_messages.h file containing these types
104 // with an include guard macro. Be aware that providing an incomplete
105 // class type declaration to avoid pulling in a long chain of headers is
106 // acceptable when your XXX_messages.h header is being included by the
107 // message sending caller's code, but not when the YYY_message_generator.c
108 // is building the messages. In addtion, due to the multiple inclusion
109 // restriction, these type ought to be guarded. Follow a convention like:
110 // #ifndef SOME_GUARD_MACRO
111 // #define SOME_GUARD_MACRO
112 // class some_class; // One incomplete class declaration
113 // class_some_other_class; // Another incomplete class declaration
114 // #endif // SOME_GUARD_MACRO
115 // #ifdef IPC_MESSAGE_IMPL
116 // #include "path/to/some_class.h" // Full class declaration
117 // #include "path/to/some_other_class.h" // Full class declaration
118 // #endif // IPC_MESSAGE_IMPL
119 // (.. IPC macros using some_class and some_other_class ...)
123 // You will use IPC message macro invocations for three things:
124 // - New struct definitions for IPC
125 // - Registering existing struct and enum definitions with IPC
126 // - Defining the messages themselves
128 // New structs are defined with IPC_STRUCT_BEGIN(), IPC_STRUCT_MEMBER(),
129 // IPC_STRUCT_END() family of macros. These cause the XXX_messages.h
130 // to proclaim equivalent struct declarations for use by callers, as well
131 // as later registering the type with the message generation. Note that
132 // IPC_STRUCT_MEMBER() is only permitted inside matching calls to
133 // IPC_STRUCT_BEGIN() / IPC_STRUCT_END(). There is also an
134 // IPC_STRUCT_BEGIN_WITH_PARENT(), which behaves like IPC_STRUCT_BEGIN(),
135 // but also accomodates structs that inherit from other structs.
137 // Externally-defined structs are registered with IPC_STRUCT_TRAITS_BEGIN(),
138 // IPC_STRUCT_TRAITS_MEMBER(), and IPC_STRUCT_TRAITS_END() macros. These
139 // cause registration of the types with message generation only.
140 // There's also IPC_STRUCT_TRAITS_PARENT, which is used to register a parent
141 // class (whose own traits are already defined). Note that
142 // IPC_STRUCT_TRAITS_MEMBER() and IPC_STRUCT_TRAITS_PARENT are only permitted
143 // inside matching calls to IPC_STRUCT_TRAITS_BEGIN() /
144 // IPC_STRUCT_TRAITS_END().
146 // Enum types are registered with a single IPC_ENUM_TRAITS_VALIDATE() macro.
147 // There is no need to enumerate each value to the IPC mechanism. Instead,
148 // pass an expression in terms of the parameter |value| to provide
149 // range-checking. For convenience, the IPC_ENUM_TRAITS() is provided which
150 // performs no checking, passing everything including out-of-range values.
151 // Its use is discouraged. The IPC_ENUM_TRAITS_MAX_VALUE() macro can be used
152 // for the typical case where the enum must be in the range 0..maxvalue
153 // inclusive. The IPC_ENUM_TRAITS_MIN_MAX_VALUE() macro can be used for the
154 // less typical case where the enum must be in the range minvalue..maxvalue
157 // Do not place semicolons following these IPC_ macro invocations. There
158 // is no reason to expect that their expansion corresponds one-to-one with
161 // Once the types have been declared / registered, message definitions follow.
162 // "Sync" messages are just synchronous calls, the Send() call doesn't return
163 // until a reply comes back. To declare a sync message, use the IPC_SYNC_
164 // macros. The numbers at the end show how many input/output parameters there
165 // are (i.e. 1_2 is 1 in, 2 out). Input parameters are first, followed by
166 // output parameters. The caller uses Send([route id, ], in1, &out1, &out2).
167 // The receiver's handler function will be
168 // void OnSyncMessageName(const type1& in1, type2* out1, type3* out2)
170 // A caller can also send a synchronous message, while the receiver can respond
171 // at a later time. This is transparent from the sender's side. The receiver
172 // needs to use a different handler that takes in a IPC::Message* as the output
173 // type, stash the message, and when it has the data it can Send the message.
175 // Use the IPC_MESSAGE_HANDLER_DELAY_REPLY macro instead of IPC_MESSAGE_HANDLER
176 // IPC_MESSAGE_HANDLER_DELAY_REPLY(ViewHostMsg_SyncMessageName,
177 // OnSyncMessageName)
179 // The handler function will look like:
180 // void OnSyncMessageName(const type1& in1, IPC::Message* reply_msg);
182 // Receiver stashes the IPC::Message* pointer, and when it's ready, it does:
183 // ViewHostMsg_SyncMessageName::WriteReplyParams(reply_msg, out1, out2);
186 // Files that want to export their ipc messages should do
187 // #undef IPC_MESSAGE_EXPORT
188 // #define IPC_MESSAGE_EXPORT VISIBILITY_MACRO
189 // after including this header, but before using any of the macros below.
190 // (This needs to be before the include guard.)
191 #undef IPC_MESSAGE_EXPORT
192 #define IPC_MESSAGE_EXPORT
194 #ifndef IPC_IPC_MESSAGE_MACROS_H_
195 #define IPC_IPC_MESSAGE_MACROS_H_
197 #include "base/profiler/scoped_profile.h"
198 #include "ipc/ipc_message_utils.h"
199 #include "ipc/param_traits_macros.h"
201 #if defined(IPC_MESSAGE_IMPL)
202 #include "ipc/ipc_message_utils_impl.h"
205 // Convenience macro for defining structs without inheritance. Should not need
206 // to be subsequently redefined.
207 #define IPC_STRUCT_BEGIN(struct_name) \
208 IPC_STRUCT_BEGIN_WITH_PARENT(struct_name, IPC::NoParams)
210 // Macros for defining structs. Will be subsequently redefined.
211 #define IPC_STRUCT_BEGIN_WITH_PARENT(struct_name, parent) \
212 struct struct_name; \
213 IPC_STRUCT_TRAITS_BEGIN(struct_name) \
214 IPC_STRUCT_TRAITS_END() \
215 struct IPC_MESSAGE_EXPORT struct_name : parent { \
218 // Optional variadic parameters specify the default value for this struct
219 // member. They are passed through to the constructor for |type|.
220 #define IPC_STRUCT_MEMBER(type, name, ...) type name;
221 #define IPC_STRUCT_END() };
223 // Message macros collect specific numbers of arguments and funnel them into
224 // the common message generation macro. These should never be redefined.
225 #define IPC_MESSAGE_CONTROL0(msg_class) \
226 IPC_MESSAGE_DECL(EMPTY, CONTROL, msg_class, 0, 0, (), ())
228 #define IPC_MESSAGE_CONTROL1(msg_class, type1) \
229 IPC_MESSAGE_DECL(ASYNC, CONTROL, msg_class, 1, 0, (type1), ())
231 #define IPC_MESSAGE_CONTROL2(msg_class, type1, type2) \
232 IPC_MESSAGE_DECL(ASYNC, CONTROL, msg_class, 2, 0, (type1, type2), ())
234 #define IPC_MESSAGE_CONTROL3(msg_class, type1, type2, type3) \
235 IPC_MESSAGE_DECL(ASYNC, CONTROL, msg_class, 3, 0, (type1, type2, type3), ())
237 #define IPC_MESSAGE_CONTROL4(msg_class, type1, type2, type3, type4) \
238 IPC_MESSAGE_DECL(ASYNC, CONTROL, msg_class, 4, 0, (type1, type2, type3, type4), ())
240 #define IPC_MESSAGE_CONTROL5(msg_class, type1, type2, type3, type4, type5) \
241 IPC_MESSAGE_DECL(ASYNC, CONTROL, msg_class, 5, 0, (type1, type2, type3, type4, type5), ())
243 #define IPC_MESSAGE_ROUTED0(msg_class) \
244 IPC_MESSAGE_DECL(EMPTY, ROUTED, msg_class, 0, 0, (), ())
246 #define IPC_MESSAGE_ROUTED1(msg_class, type1) \
247 IPC_MESSAGE_DECL(ASYNC, ROUTED, msg_class, 1, 0, (type1), ())
249 #define IPC_MESSAGE_ROUTED2(msg_class, type1, type2) \
250 IPC_MESSAGE_DECL(ASYNC, ROUTED, msg_class, 2, 0, (type1, type2), ())
252 #define IPC_MESSAGE_ROUTED3(msg_class, type1, type2, type3) \
253 IPC_MESSAGE_DECL(ASYNC, ROUTED, msg_class, 3, 0, (type1, type2, type3), ())
255 #define IPC_MESSAGE_ROUTED4(msg_class, type1, type2, type3, type4) \
256 IPC_MESSAGE_DECL(ASYNC, ROUTED, msg_class, 4, 0, (type1, type2, type3, type4), ())
258 #define IPC_MESSAGE_ROUTED5(msg_class, type1, type2, type3, type4, type5) \
259 IPC_MESSAGE_DECL(ASYNC, ROUTED, msg_class, 5, 0, (type1, type2, type3, type4, type5), ())
261 #define IPC_SYNC_MESSAGE_CONTROL0_0(msg_class) \
262 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 0, 0, (), ())
264 #define IPC_SYNC_MESSAGE_CONTROL0_1(msg_class, type1_out) \
265 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 0, 1, (), (type1_out))
267 #define IPC_SYNC_MESSAGE_CONTROL0_2(msg_class, type1_out, type2_out) \
268 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 0, 2, (), (type1_out, type2_out))
270 #define IPC_SYNC_MESSAGE_CONTROL0_3(msg_class, type1_out, type2_out, type3_out) \
271 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 0, 3, (), (type1_out, type2_out, type3_out))
273 #define IPC_SYNC_MESSAGE_CONTROL0_4(msg_class, type1_out, type2_out, type3_out, type4_out) \
274 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 0, 4, (), (type1_out, type2_out, type3_out, type4_out))
276 #define IPC_SYNC_MESSAGE_CONTROL1_0(msg_class, type1_in) \
277 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 1, 0, (type1_in), ())
279 #define IPC_SYNC_MESSAGE_CONTROL1_1(msg_class, type1_in, type1_out) \
280 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 1, 1, (type1_in), (type1_out))
282 #define IPC_SYNC_MESSAGE_CONTROL1_2(msg_class, type1_in, type1_out, type2_out) \
283 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 1, 2, (type1_in), (type1_out, type2_out))
285 #define IPC_SYNC_MESSAGE_CONTROL1_3(msg_class, type1_in, type1_out, type2_out, type3_out) \
286 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 1, 3, (type1_in), (type1_out, type2_out, type3_out))
288 #define IPC_SYNC_MESSAGE_CONTROL1_4(msg_class, type1_in, type1_out, type2_out, type3_out, type4_out) \
289 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 1, 4, (type1_in), (type1_out, type2_out, type3_out, type4_out))
291 #define IPC_SYNC_MESSAGE_CONTROL2_0(msg_class, type1_in, type2_in) \
292 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 2, 0, (type1_in, type2_in), ())
294 #define IPC_SYNC_MESSAGE_CONTROL2_1(msg_class, type1_in, type2_in, type1_out) \
295 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 2, 1, (type1_in, type2_in), (type1_out))
297 #define IPC_SYNC_MESSAGE_CONTROL2_2(msg_class, type1_in, type2_in, type1_out, type2_out) \
298 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 2, 2, (type1_in, type2_in), (type1_out, type2_out))
300 #define IPC_SYNC_MESSAGE_CONTROL2_3(msg_class, type1_in, type2_in, type1_out, type2_out, type3_out) \
301 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 2, 3, (type1_in, type2_in), (type1_out, type2_out, type3_out))
303 #define IPC_SYNC_MESSAGE_CONTROL2_4(msg_class, type1_in, type2_in, type1_out, type2_out, type3_out, type4_out) \
304 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 2, 4, (type1_in, type2_in), (type1_out, type2_out, type3_out, type4_out))
306 #define IPC_SYNC_MESSAGE_CONTROL3_0(msg_class, type1_in, type2_in, type3_in) \
307 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 3, 0, (type1_in, type2_in, type3_in), ())
309 #define IPC_SYNC_MESSAGE_CONTROL3_1(msg_class, type1_in, type2_in, type3_in, type1_out) \
310 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 3, 1, (type1_in, type2_in, type3_in), (type1_out))
312 #define IPC_SYNC_MESSAGE_CONTROL3_2(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out) \
313 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 3, 2, (type1_in, type2_in, type3_in), (type1_out, type2_out))
315 #define IPC_SYNC_MESSAGE_CONTROL3_3(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out, type3_out) \
316 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 3, 3, (type1_in, type2_in, type3_in), (type1_out, type2_out, type3_out))
318 #define IPC_SYNC_MESSAGE_CONTROL3_4(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out, type3_out, type4_out) \
319 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 3, 4, (type1_in, type2_in, type3_in), (type1_out, type2_out, type3_out, type4_out))
321 #define IPC_SYNC_MESSAGE_CONTROL4_0(msg_class, type1_in, type2_in, type3_in, type4_in) \
322 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 4, 0, (type1_in, type2_in, type3_in, type4_in), ())
324 #define IPC_SYNC_MESSAGE_CONTROL4_1(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out) \
325 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 4, 1, (type1_in, type2_in, type3_in, type4_in), (type1_out))
327 #define IPC_SYNC_MESSAGE_CONTROL4_2(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out) \
328 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 4, 2, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out))
330 #define IPC_SYNC_MESSAGE_CONTROL4_3(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out, type3_out) \
331 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 4, 3, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out, type3_out))
333 #define IPC_SYNC_MESSAGE_CONTROL4_4(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out, type3_out, type4_out) \
334 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 4, 4, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out, type3_out, type4_out))
336 #define IPC_SYNC_MESSAGE_CONTROL5_0(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in) \
337 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 5, 0, (type1_in, type2_in, type3_in, type4_in, type5_in), ())
339 #define IPC_SYNC_MESSAGE_CONTROL5_1(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out) \
340 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 5, 1, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out))
342 #define IPC_SYNC_MESSAGE_CONTROL5_2(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out) \
343 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 5, 2, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out, type2_out))
345 #define IPC_SYNC_MESSAGE_CONTROL5_3(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out, type3_out) \
346 IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 5, 3, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out, type2_out, type3_out))
348 #define IPC_SYNC_MESSAGE_ROUTED0_0(msg_class) \
349 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 0, 0, (), ())
351 #define IPC_SYNC_MESSAGE_ROUTED0_1(msg_class, type1_out) \
352 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 0, 1, (), (type1_out))
354 #define IPC_SYNC_MESSAGE_ROUTED0_2(msg_class, type1_out, type2_out) \
355 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 0, 2, (), (type1_out, type2_out))
357 #define IPC_SYNC_MESSAGE_ROUTED0_3(msg_class, type1_out, type2_out, type3_out) \
358 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 0, 3, (), (type1_out, type2_out, type3_out))
360 #define IPC_SYNC_MESSAGE_ROUTED0_4(msg_class, type1_out, type2_out, type3_out, type4_out) \
361 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 0, 4, (), (type1_out, type2_out, type3_out, type4_out))
363 #define IPC_SYNC_MESSAGE_ROUTED1_0(msg_class, type1_in) \
364 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 1, 0, (type1_in), ())
366 #define IPC_SYNC_MESSAGE_ROUTED1_1(msg_class, type1_in, type1_out) \
367 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 1, 1, (type1_in), (type1_out))
369 #define IPC_SYNC_MESSAGE_ROUTED1_2(msg_class, type1_in, type1_out, type2_out) \
370 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 1, 2, (type1_in), (type1_out, type2_out))
372 #define IPC_SYNC_MESSAGE_ROUTED1_3(msg_class, type1_in, type1_out, type2_out, type3_out) \
373 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 1, 3, (type1_in), (type1_out, type2_out, type3_out))
375 #define IPC_SYNC_MESSAGE_ROUTED1_4(msg_class, type1_in, type1_out, type2_out, type3_out, type4_out) \
376 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 1, 4, (type1_in), (type1_out, type2_out, type3_out, type4_out))
378 #define IPC_SYNC_MESSAGE_ROUTED2_0(msg_class, type1_in, type2_in) \
379 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 2, 0, (type1_in, type2_in), ())
381 #define IPC_SYNC_MESSAGE_ROUTED2_1(msg_class, type1_in, type2_in, type1_out) \
382 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 2, 1, (type1_in, type2_in), (type1_out))
384 #define IPC_SYNC_MESSAGE_ROUTED2_2(msg_class, type1_in, type2_in, type1_out, type2_out) \
385 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 2, 2, (type1_in, type2_in), (type1_out, type2_out))
387 #define IPC_SYNC_MESSAGE_ROUTED2_3(msg_class, type1_in, type2_in, type1_out, type2_out, type3_out) \
388 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 2, 3, (type1_in, type2_in), (type1_out, type2_out, type3_out))
390 #define IPC_SYNC_MESSAGE_ROUTED2_4(msg_class, type1_in, type2_in, type1_out, type2_out, type3_out, type4_out) \
391 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 2, 4, (type1_in, type2_in), (type1_out, type2_out, type3_out, type4_out))
393 #define IPC_SYNC_MESSAGE_ROUTED3_0(msg_class, type1_in, type2_in, type3_in) \
394 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 3, 0, (type1_in, type2_in, type3_in), ())
396 #define IPC_SYNC_MESSAGE_ROUTED3_1(msg_class, type1_in, type2_in, type3_in, type1_out) \
397 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 3, 1, (type1_in, type2_in, type3_in), (type1_out))
399 #define IPC_SYNC_MESSAGE_ROUTED3_2(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out) \
400 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 3, 2, (type1_in, type2_in, type3_in), (type1_out, type2_out))
402 #define IPC_SYNC_MESSAGE_ROUTED3_3(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out, type3_out) \
403 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 3, 3, (type1_in, type2_in, type3_in), (type1_out, type2_out, type3_out))
405 #define IPC_SYNC_MESSAGE_ROUTED3_4(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out, type3_out, type4_out) \
406 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 3, 4, (type1_in, type2_in, type3_in), (type1_out, type2_out, type3_out, type4_out))
408 #define IPC_SYNC_MESSAGE_ROUTED4_0(msg_class, type1_in, type2_in, type3_in, type4_in) \
409 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 4, 0, (type1_in, type2_in, type3_in, type4_in), ())
411 #define IPC_SYNC_MESSAGE_ROUTED4_1(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out) \
412 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 4, 1, (type1_in, type2_in, type3_in, type4_in), (type1_out))
414 #define IPC_SYNC_MESSAGE_ROUTED4_2(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out) \
415 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 4, 2, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out))
417 #define IPC_SYNC_MESSAGE_ROUTED4_3(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out, type3_out) \
418 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 4, 3, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out, type3_out))
420 #define IPC_SYNC_MESSAGE_ROUTED4_4(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out, type3_out, type4_out) \
421 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 4, 4, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out, type3_out, type4_out))
423 #define IPC_SYNC_MESSAGE_ROUTED5_0(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in) \
424 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 5, 0, (type1_in, type2_in, type3_in, type4_in, type5_in), ())
426 #define IPC_SYNC_MESSAGE_ROUTED5_1(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out) \
427 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 5, 1, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out))
429 #define IPC_SYNC_MESSAGE_ROUTED5_2(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out) \
430 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 5, 2, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out, type2_out))
432 #define IPC_SYNC_MESSAGE_ROUTED5_3(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out, type3_out) \
433 IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 5, 3, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out, type2_out, type3_out))
435 // The following macros define the common set of methods provided by ASYNC
437 // This macro is for all the async IPCs that don't pass an extra parameter using
438 // IPC_BEGIN_MESSAGE_MAP_WITH_PARAM.
439 #define IPC_ASYNC_MESSAGE_METHODS_GENERIC \
440 template<class T, class S, class P, class Method> \
441 static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \
444 if (Read(msg, &p)) { \
445 DispatchToMethod(obj, func, p); \
451 // The following macros are for for async IPCs which have a dispatcher with an
452 // extra parameter specified using IPC_BEGIN_MESSAGE_MAP_WITH_PARAM.
453 #define IPC_ASYNC_MESSAGE_METHODS_1 \
454 IPC_ASYNC_MESSAGE_METHODS_GENERIC \
455 template<class T, class S, class P, typename TA> \
456 static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \
457 void (T::*func)(P*, TA)) { \
459 if (Read(msg, &p)) { \
460 (obj->*func)(parameter, get<0>(p)); \
465 #define IPC_ASYNC_MESSAGE_METHODS_2 \
466 IPC_ASYNC_MESSAGE_METHODS_GENERIC \
467 template<class T, class S, class P, typename TA, typename TB> \
468 static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \
469 void (T::*func)(P*, TA, TB)) { \
471 if (Read(msg, &p)) { \
472 (obj->*func)(parameter, get<0>(p), get<1>(p)); \
477 #define IPC_ASYNC_MESSAGE_METHODS_3 \
478 IPC_ASYNC_MESSAGE_METHODS_GENERIC \
479 template<class T, class S, class P, typename TA, typename TB, typename TC> \
480 static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \
481 void (T::*func)(P*, TA, TB, TC)) { \
483 if (Read(msg, &p)) { \
484 (obj->*func)(parameter, get<0>(p), get<1>(p), get<2>(p)); \
489 #define IPC_ASYNC_MESSAGE_METHODS_4 \
490 IPC_ASYNC_MESSAGE_METHODS_GENERIC \
491 template<class T, class S, class P, typename TA, typename TB, typename TC, \
493 static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \
494 void (T::*func)(P*, TA, TB, TC, TD)) { \
496 if (Read(msg, &p)) { \
497 (obj->*func)(parameter, get<0>(p), get<1>(p), get<2>(p), get<3>(p)); \
502 #define IPC_ASYNC_MESSAGE_METHODS_5 \
503 IPC_ASYNC_MESSAGE_METHODS_GENERIC \
504 template<class T, class S, class P, typename TA, typename TB, typename TC, \
505 typename TD, typename TE> \
506 static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \
507 void (T::*func)(P*, TA, TB, TC, TD, TE)) { \
509 if (Read(msg, &p)) { \
510 (obj->*func)(parameter, get<0>(p), get<1>(p), get<2>(p), get<3>(p), \
517 // The following macros define the common set of methods provided by SYNC
519 #define IPC_SYNC_MESSAGE_METHODS_GENERIC \
520 template<class T, class S, class P, class Method> \
521 static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \
523 Schema::SendParam send_params; \
524 bool ok = ReadSendParam(msg, &send_params); \
525 return Schema::DispatchWithSendParams(ok, send_params, msg, obj, sender, \
528 template<class T, class P, class Method> \
529 static bool DispatchDelayReply(const Message* msg, T* obj, P* parameter, \
531 Schema::SendParam send_params; \
532 bool ok = ReadSendParam(msg, &send_params); \
533 return Schema::DispatchDelayReplyWithSendParams(ok, send_params, msg, \
536 #define IPC_SYNC_MESSAGE_METHODS_0 \
537 IPC_SYNC_MESSAGE_METHODS_GENERIC
538 #define IPC_SYNC_MESSAGE_METHODS_1 \
539 IPC_SYNC_MESSAGE_METHODS_GENERIC \
540 template<typename TA> \
541 static void WriteReplyParams(Message* reply, TA a) { \
542 Schema::WriteReplyParams(reply, a); \
544 #define IPC_SYNC_MESSAGE_METHODS_2 \
545 IPC_SYNC_MESSAGE_METHODS_GENERIC \
546 template<typename TA, typename TB> \
547 static void WriteReplyParams(Message* reply, TA a, TB b) { \
548 Schema::WriteReplyParams(reply, a, b); \
550 #define IPC_SYNC_MESSAGE_METHODS_3 \
551 IPC_SYNC_MESSAGE_METHODS_GENERIC \
552 template<typename TA, typename TB, typename TC> \
553 static void WriteReplyParams(Message* reply, TA a, TB b, TC c) { \
554 Schema::WriteReplyParams(reply, a, b, c); \
556 #define IPC_SYNC_MESSAGE_METHODS_4 \
557 IPC_SYNC_MESSAGE_METHODS_GENERIC \
558 template<typename TA, typename TB, typename TC, typename TD> \
559 static void WriteReplyParams(Message* reply, TA a, TB b, TC c, TD d) { \
560 Schema::WriteReplyParams(reply, a, b, c, d); \
562 #define IPC_SYNC_MESSAGE_METHODS_5 \
563 IPC_SYNC_MESSAGE_METHODS_GENERIC \
564 template<typename TA, typename TB, typename TC, typename TD, typename TE> \
565 static void WriteReplyParams(Message* reply, TA a, TB b, TC c, TD d, TE e) { \
566 Schema::WriteReplyParams(reply, a, b, c, d, e); \
569 // Common message macro which dispatches into one of the 6 (sync x kind)
570 // routines. There is a way that these 6 cases can be lumped together,
571 // but the macros get very complicated in that case.
572 // Note: intended be redefined to generate other information.
573 #define IPC_MESSAGE_DECL(sync, kind, msg_class, \
574 in_cnt, out_cnt, in_list, out_list) \
575 IPC_##sync##_##kind##_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \
576 IPC_MESSAGE_EXTRA(sync, kind, msg_class, in_cnt, out_cnt, in_list, out_list)
578 #define IPC_EMPTY_CONTROL_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \
579 class IPC_MESSAGE_EXPORT msg_class : public IPC::Message { \
581 typedef IPC::Message Schema; \
582 enum { ID = IPC_MESSAGE_ID() }; \
583 msg_class() : IPC::Message(MSG_ROUTING_CONTROL, ID, PRIORITY_NORMAL) {} \
584 static void Log(std::string* name, const Message* msg, std::string* l); \
587 #define IPC_EMPTY_ROUTED_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \
588 class IPC_MESSAGE_EXPORT msg_class : public IPC::Message { \
590 typedef IPC::Message Schema; \
591 enum { ID = IPC_MESSAGE_ID() }; \
592 msg_class(int32 routing_id) \
593 : IPC::Message(routing_id, ID, PRIORITY_NORMAL) {} \
594 static void Log(std::string* name, const Message* msg, std::string* l); \
597 #define IPC_ASYNC_CONTROL_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \
598 class IPC_MESSAGE_EXPORT msg_class : public IPC::Message { \
600 typedef IPC::MessageSchema<IPC_TUPLE_IN_##in_cnt in_list> Schema; \
601 typedef Schema::Param Param; \
602 enum { ID = IPC_MESSAGE_ID() }; \
603 msg_class(IPC_TYPE_IN_##in_cnt in_list); \
604 ~msg_class() override; \
605 static bool Read(const Message* msg, Schema::Param* p); \
606 static void Log(std::string* name, const Message* msg, std::string* l); \
607 IPC_ASYNC_MESSAGE_METHODS_##in_cnt \
610 #define IPC_ASYNC_ROUTED_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \
611 class IPC_MESSAGE_EXPORT msg_class : public IPC::Message { \
613 typedef IPC::MessageSchema<IPC_TUPLE_IN_##in_cnt in_list> Schema; \
614 typedef Schema::Param Param; \
615 enum { ID = IPC_MESSAGE_ID() }; \
616 msg_class(int32 routing_id IPC_COMMA_##in_cnt \
617 IPC_TYPE_IN_##in_cnt in_list); \
618 ~msg_class() override; \
619 static bool Read(const Message* msg, Schema::Param* p); \
620 static void Log(std::string* name, const Message* msg, std::string* l); \
621 IPC_ASYNC_MESSAGE_METHODS_##in_cnt \
624 #define IPC_SYNC_CONTROL_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \
625 class IPC_MESSAGE_EXPORT msg_class : public IPC::SyncMessage { \
627 typedef IPC::SyncMessageSchema<IPC_TUPLE_IN_##in_cnt in_list, \
628 IPC_TUPLE_OUT_##out_cnt out_list> Schema; \
629 typedef Schema::ReplyParam ReplyParam; \
630 typedef Schema::SendParam SendParam; \
631 enum { ID = IPC_MESSAGE_ID() }; \
632 msg_class(IPC_TYPE_IN_##in_cnt in_list \
633 IPC_COMMA_AND_##in_cnt(IPC_COMMA_##out_cnt) \
634 IPC_TYPE_OUT_##out_cnt out_list); \
635 ~msg_class() override; \
636 static bool ReadSendParam(const Message* msg, Schema::SendParam* p); \
637 static bool ReadReplyParam( \
638 const Message* msg, \
639 TupleTypes<ReplyParam>::ValueTuple* p); \
640 static void Log(std::string* name, const Message* msg, std::string* l); \
641 IPC_SYNC_MESSAGE_METHODS_##out_cnt \
644 #define IPC_SYNC_ROUTED_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \
645 class IPC_MESSAGE_EXPORT msg_class : public IPC::SyncMessage { \
647 typedef IPC::SyncMessageSchema<IPC_TUPLE_IN_##in_cnt in_list, \
648 IPC_TUPLE_OUT_##out_cnt out_list> Schema; \
649 typedef Schema::ReplyParam ReplyParam; \
650 typedef Schema::SendParam SendParam; \
651 enum { ID = IPC_MESSAGE_ID() }; \
652 msg_class(int32 routing_id \
653 IPC_COMMA_OR_##in_cnt(IPC_COMMA_##out_cnt) \
654 IPC_TYPE_IN_##in_cnt in_list \
655 IPC_COMMA_AND_##in_cnt(IPC_COMMA_##out_cnt) \
656 IPC_TYPE_OUT_##out_cnt out_list); \
657 ~msg_class() override; \
658 static bool ReadSendParam(const Message* msg, Schema::SendParam* p); \
659 static bool ReadReplyParam( \
660 const Message* msg, \
661 TupleTypes<ReplyParam>::ValueTuple* p); \
662 static void Log(std::string* name, const Message* msg, std::string* l); \
663 IPC_SYNC_MESSAGE_METHODS_##out_cnt \
666 #if defined(IPC_MESSAGE_IMPL)
668 // "Implementation" inclusion produces constructors, destructors, and
669 // logging functions, except for the no-arg special cases, where the
670 // implementation occurs in the declaration, and there is no special
672 #define IPC_MESSAGE_EXTRA(sync, kind, msg_class, \
673 in_cnt, out_cnt, in_list, out_list) \
674 IPC_##sync##_##kind##_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) \
675 IPC_##sync##_MESSAGE_LOG(msg_class)
677 #define IPC_EMPTY_CONTROL_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list)
678 #define IPC_EMPTY_ROUTED_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list)
680 #define IPC_ASYNC_CONTROL_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) \
681 msg_class::msg_class(IPC_TYPE_IN_##in_cnt in_list) : \
682 IPC::Message(MSG_ROUTING_CONTROL, ID, PRIORITY_NORMAL) { \
683 Schema::Write(this, IPC_NAME_IN_##in_cnt in_list); \
685 msg_class::~msg_class() {} \
686 bool msg_class::Read(const Message* msg, Schema::Param* p) { \
687 return Schema::Read(msg, p); \
690 #define IPC_ASYNC_ROUTED_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) \
691 msg_class::msg_class(int32 routing_id IPC_COMMA_##in_cnt \
692 IPC_TYPE_IN_##in_cnt in_list) : \
693 IPC::Message(routing_id, ID, PRIORITY_NORMAL) { \
694 Schema::Write(this, IPC_NAME_IN_##in_cnt in_list); \
696 msg_class::~msg_class() {} \
697 bool msg_class::Read(const Message* msg, Schema::Param* p) { \
698 return Schema::Read(msg, p); \
701 #define IPC_SYNC_CONTROL_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) \
702 msg_class::msg_class(IPC_TYPE_IN_##in_cnt in_list \
703 IPC_COMMA_AND_##in_cnt(IPC_COMMA_##out_cnt) \
704 IPC_TYPE_OUT_##out_cnt out_list) : \
705 IPC::SyncMessage(MSG_ROUTING_CONTROL, ID, PRIORITY_NORMAL, \
706 new IPC::ParamDeserializer<Schema::ReplyParam>( \
707 IPC_NAME_OUT_##out_cnt out_list)) { \
708 Schema::Write(this, IPC_NAME_IN_##in_cnt in_list); \
710 msg_class::~msg_class() {} \
711 bool msg_class::ReadSendParam(const Message* msg, Schema::SendParam* p) { \
712 return Schema::ReadSendParam(msg, p); \
714 bool msg_class::ReadReplyParam(const Message* msg, \
715 TupleTypes<ReplyParam>::ValueTuple* p) { \
716 return Schema::ReadReplyParam(msg, p); \
719 #define IPC_SYNC_ROUTED_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) \
720 msg_class::msg_class(int32 routing_id \
721 IPC_COMMA_OR_##in_cnt(IPC_COMMA_##out_cnt) \
722 IPC_TYPE_IN_##in_cnt in_list \
723 IPC_COMMA_AND_##in_cnt(IPC_COMMA_##out_cnt) \
724 IPC_TYPE_OUT_##out_cnt out_list) : \
725 IPC::SyncMessage(routing_id, ID, PRIORITY_NORMAL, \
726 new IPC::ParamDeserializer<Schema::ReplyParam>( \
727 IPC_NAME_OUT_##out_cnt out_list)) { \
728 Schema::Write(this, IPC_NAME_IN_##in_cnt in_list); \
730 msg_class::~msg_class() {} \
731 bool msg_class::ReadSendParam(const Message* msg, Schema::SendParam* p) { \
732 return Schema::ReadSendParam(msg, p); \
734 bool msg_class::ReadReplyParam(const Message* msg, \
735 TupleTypes<ReplyParam>::ValueTuple* p) { \
736 return Schema::ReadReplyParam(msg, p); \
739 #define IPC_EMPTY_MESSAGE_LOG(msg_class) \
740 void msg_class::Log(std::string* name, \
741 const Message* msg, \
744 *name = #msg_class; \
747 #define IPC_ASYNC_MESSAGE_LOG(msg_class) \
748 void msg_class::Log(std::string* name, \
749 const Message* msg, \
752 *name = #msg_class; \
756 if (Schema::Read(msg, &p)) \
757 IPC::LogParam(p, l); \
760 #define IPC_SYNC_MESSAGE_LOG(msg_class) \
761 void msg_class::Log(std::string* name, \
762 const Message* msg, \
765 *name = #msg_class; \
768 if (msg->is_sync()) { \
769 TupleTypes<Schema::SendParam>::ValueTuple p; \
770 if (Schema::ReadSendParam(msg, &p)) \
771 IPC::LogParam(p, l); \
772 AddOutputParamsToLog(msg, l); \
774 TupleTypes<Schema::ReplyParam>::ValueTuple p; \
775 if (Schema::ReadReplyParam(msg, &p)) \
776 IPC::LogParam(p, l); \
780 #elif defined(IPC_MESSAGE_MACROS_LOG_ENABLED)
782 #ifndef IPC_LOG_TABLE_ADD_ENTRY
783 #error You need to define IPC_LOG_TABLE_ADD_ENTRY(msg_id, logger)
786 // "Log table" inclusion produces extra logging registration code.
787 #define IPC_MESSAGE_EXTRA(sync, kind, msg_class, \
788 in_cnt, out_cnt, in_list, out_list) \
789 class LoggerRegisterHelper##msg_class { \
791 LoggerRegisterHelper##msg_class() { \
792 const uint32 msg_id = static_cast<uint32>(msg_class::ID); \
793 IPC_LOG_TABLE_ADD_ENTRY(msg_id, msg_class::Log); \
796 LoggerRegisterHelper##msg_class g_LoggerRegisterHelper##msg_class;
800 // Normal inclusion produces nothing extra.
801 #define IPC_MESSAGE_EXTRA(sync, kind, msg_class, \
802 in_cnt, out_cnt, in_list, out_list)
804 #endif // defined(IPC_MESSAGE_IMPL)
806 // Handle variable sized argument lists. These are usually invoked by token
807 // pasting against the argument counts.
808 #define IPC_TYPE_IN_0()
809 #define IPC_TYPE_IN_1(t1) const t1& arg1
810 #define IPC_TYPE_IN_2(t1, t2) const t1& arg1, const t2& arg2
811 #define IPC_TYPE_IN_3(t1, t2, t3) const t1& arg1, const t2& arg2, const t3& arg3
812 #define IPC_TYPE_IN_4(t1, t2, t3, t4) const t1& arg1, const t2& arg2, const t3& arg3, const t4& arg4
813 #define IPC_TYPE_IN_5(t1, t2, t3, t4, t5) const t1& arg1, const t2& arg2, const t3& arg3, const t4& arg4, const t5& arg5
815 #define IPC_TYPE_OUT_0()
816 #define IPC_TYPE_OUT_1(t1) t1* arg6
817 #define IPC_TYPE_OUT_2(t1, t2) t1* arg6, t2* arg7
818 #define IPC_TYPE_OUT_3(t1, t2, t3) t1* arg6, t2* arg7, t3* arg8
819 #define IPC_TYPE_OUT_4(t1, t2, t3, t4) t1* arg6, t2* arg7, t3* arg8, t4* arg9
821 #define IPC_TUPLE_IN_0() Tuple<>
822 #define IPC_TUPLE_IN_1(t1) Tuple<t1>
823 #define IPC_TUPLE_IN_2(t1, t2) Tuple<t1, t2>
824 #define IPC_TUPLE_IN_3(t1, t2, t3) Tuple<t1, t2, t3>
825 #define IPC_TUPLE_IN_4(t1, t2, t3, t4) Tuple<t1, t2, t3, t4>
826 #define IPC_TUPLE_IN_5(t1, t2, t3, t4, t5) Tuple<t1, t2, t3, t4, t5>
828 #define IPC_TUPLE_OUT_0() Tuple<>
829 #define IPC_TUPLE_OUT_1(t1) Tuple<t1&>
830 #define IPC_TUPLE_OUT_2(t1, t2) Tuple<t1&, t2&>
831 #define IPC_TUPLE_OUT_3(t1, t2, t3) Tuple<t1&, t2&, t3&>
832 #define IPC_TUPLE_OUT_4(t1, t2, t3, t4) Tuple<t1&, t2&, t3&, t4&>
834 #define IPC_NAME_IN_0() MakeTuple()
835 #define IPC_NAME_IN_1(t1) MakeRefTuple(arg1)
836 #define IPC_NAME_IN_2(t1, t2) MakeRefTuple(arg1, arg2)
837 #define IPC_NAME_IN_3(t1, t2, t3) MakeRefTuple(arg1, arg2, arg3)
838 #define IPC_NAME_IN_4(t1, t2, t3, t4) MakeRefTuple(arg1, arg2, arg3, arg4)
839 #define IPC_NAME_IN_5(t1, t2, t3, t4, t5) MakeRefTuple(arg1, arg2, arg3, arg4, arg5)
841 #define IPC_NAME_OUT_0() MakeTuple()
842 #define IPC_NAME_OUT_1(t1) MakeRefTuple(*arg6)
843 #define IPC_NAME_OUT_2(t1, t2) MakeRefTuple(*arg6, *arg7)
844 #define IPC_NAME_OUT_3(t1, t2, t3) MakeRefTuple(*arg6, *arg7, *arg8)
845 #define IPC_NAME_OUT_4(t1, t2, t3, t4) MakeRefTuple(*arg6, *arg7, *arg8, *arg9)
847 // There are places where the syntax requires a comma if there are input args,
848 // if there are input args and output args, or if there are input args or
849 // output args. These macros allow generation of the comma as needed; invoke
850 // by token pasting against the argument counts.
852 #define IPC_COMMA_1 ,
853 #define IPC_COMMA_2 ,
854 #define IPC_COMMA_3 ,
855 #define IPC_COMMA_4 ,
856 #define IPC_COMMA_5 ,
858 #define IPC_COMMA_AND_0(x)
859 #define IPC_COMMA_AND_1(x) x
860 #define IPC_COMMA_AND_2(x) x
861 #define IPC_COMMA_AND_3(x) x
862 #define IPC_COMMA_AND_4(x) x
863 #define IPC_COMMA_AND_5(x) x
865 #define IPC_COMMA_OR_0(x) x
866 #define IPC_COMMA_OR_1(x) ,
867 #define IPC_COMMA_OR_2(x) ,
868 #define IPC_COMMA_OR_3(x) ,
869 #define IPC_COMMA_OR_4(x) ,
870 #define IPC_COMMA_OR_5(x) ,
873 // Note: we currently use __LINE__ to give unique IDs to messages within
874 // a file. They're globally unique since each file defines its own
875 // IPC_MESSAGE_START.
876 #define IPC_MESSAGE_ID() ((IPC_MESSAGE_START << 16) + __LINE__)
877 #define IPC_MESSAGE_ID_CLASS(id) ((id) >> 16)
878 #define IPC_MESSAGE_ID_LINE(id) ((id) & 0xffff)
880 // Message crackers and handlers. Usage:
882 // bool MyClass::OnMessageReceived(const IPC::Message& msg) {
883 // bool handled = true;
884 // IPC_BEGIN_MESSAGE_MAP(MyClass, msg)
885 // IPC_MESSAGE_HANDLER(MsgClassOne, OnMsgClassOne)
886 // ...more handlers here ...
887 // IPC_MESSAGE_HANDLER(MsgClassTen, OnMsgClassTen)
888 // IPC_MESSAGE_UNHANDLED(handled = false)
889 // IPC_END_MESSAGE_MAP()
894 #define IPC_BEGIN_MESSAGE_MAP(class_name, msg) \
896 typedef class_name _IpcMessageHandlerClass ALLOW_UNUSED_TYPE; \
897 void* param__ = NULL; \
898 const IPC::Message& ipc_message__ = msg; \
899 switch (ipc_message__.type()) {
901 #define IPC_BEGIN_MESSAGE_MAP_WITH_PARAM(class_name, msg, param) \
903 typedef class_name _IpcMessageHandlerClass ALLOW_UNUSED_TYPE; \
904 decltype(param) param__ = param; \
905 const IPC::Message& ipc_message__ = msg; \
906 switch (ipc_message__.type()) {
908 #define IPC_MESSAGE_FORWARD(msg_class, obj, member_func) \
909 case msg_class::ID: { \
910 TRACK_RUN_IN_THIS_SCOPED_REGION(member_func); \
911 if (!msg_class::Dispatch(&ipc_message__, obj, this, param__, \
913 ipc_message__.set_dispatch_error(); \
917 #define IPC_MESSAGE_HANDLER(msg_class, member_func) \
918 IPC_MESSAGE_FORWARD(msg_class, this, _IpcMessageHandlerClass::member_func)
920 #define IPC_MESSAGE_FORWARD_DELAY_REPLY(msg_class, obj, member_func) \
921 case msg_class::ID: { \
922 TRACK_RUN_IN_THIS_SCOPED_REGION(member_func); \
923 if (!msg_class::DispatchDelayReply(&ipc_message__, obj, param__, \
925 ipc_message__.set_dispatch_error(); \
929 #define IPC_MESSAGE_HANDLER_DELAY_REPLY(msg_class, member_func) \
930 IPC_MESSAGE_FORWARD_DELAY_REPLY(msg_class, this, \
931 _IpcMessageHandlerClass::member_func)
933 // TODO(jar): fix chrome frame to always supply |code| argument.
934 #define IPC_MESSAGE_HANDLER_GENERIC(msg_class, code) \
935 case msg_class::ID: { \
936 /* TRACK_RUN_IN_THIS_SCOPED_REGION(code); TODO(jar) */ \
941 #define IPC_REPLY_HANDLER(func) \
942 case IPC_REPLY_ID: { \
943 TRACK_RUN_IN_THIS_SCOPED_REGION(func); \
944 func(ipc_message__); \
949 #define IPC_MESSAGE_UNHANDLED(code) \
955 #define IPC_MESSAGE_UNHANDLED_ERROR() \
956 IPC_MESSAGE_UNHANDLED(NOTREACHED() << \
957 "Invalid message with type = " << \
958 ipc_message__.type())
960 #define IPC_END_MESSAGE_MAP() \
964 // This corresponds to an enum value from IPCMessageStart.
965 #define IPC_MESSAGE_CLASS(message) \
966 IPC_MESSAGE_ID_CLASS(message.type())
968 #endif // IPC_IPC_MESSAGE_MACROS_H_
970 // The following #ifdef cannot be removed. Although the code is semantically
971 // equivalent without the #ifdef, VS2013 contains a bug where it is
972 // over-aggressive in optimizing out #includes. Putting the #ifdef is a
973 // workaround for this bug. See http://goo.gl/eGt2Fb for more details.
974 // This can be removed once VS2013 is fixed.
975 #ifdef IPC_MESSAGE_START
976 // Clean up IPC_MESSAGE_START in this unguarded section so that the
977 // XXX_messages.h files need not do so themselves. This makes the
978 // XXX_messages.h files easier to write.
979 #undef IPC_MESSAGE_START