Revert of Roll src/third_party/WebKit e0eac24:489c548 (svn 193311:193320) (patchset...
[chromium-blink-merge.git] / third_party / codesighs / basesummary.unix.bash
blob34cd298c7e3b1561f430c482054b20806e9ff5e1
1 #!/bin/bash
3 # ***** BEGIN LICENSE BLOCK *****
4 # Version: MPL 1.1/GPL 2.0/LGPL 2.1
6 # The contents of this file are subject to the Mozilla Public License Version
7 # 1.1 (the "License"); you may not use this file except in compliance with
8 # the License. You may obtain a copy of the License at
9 # http://www.mozilla.org/MPL/
11 # Software distributed under the License is distributed on an "AS IS" basis,
12 # WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
13 # for the specific language governing rights and limitations under the
14 # License.
16 # The Original Code is basesummary.linx.bash code, released
17 # Nov 15, 2002.
19 # The Initial Developer of the Original Code is
20 # Netscape Communications Corporation.
21 # Portions created by the Initial Developer are Copyright (C) 2002
22 # the Initial Developer. All Rights Reserved.
24 # Contributor(s):
25 # Garrett Arch Blythe, 15-November-2002
26 # Simon Fraser <sfraser@netscape.com>
28 # Alternatively, the contents of this file may be used under the terms of
29 # either the GNU General Public License Version 2 or later (the "GPL"), or
30 # the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
31 # in which case the provisions of the GPL or the LGPL are applicable instead
32 # of those above. If you wish to allow use of your version of this file only
33 # under the terms of either the GPL or the LGPL, and not to allow others to
34 # use your version of this file under the terms of the MPL, indicate your
35 # decision by deleting the provisions above and replace them with the notice
36 # and other provisions required by the GPL or the LGPL. If you do not delete
37 # the provisions above, a recipient may use your version of this file under
38 # the terms of any one of the MPL, the GPL or the LGPL.
40 # ***** END LICENSE BLOCK *****
43 # Check for optional objdir
45 if [ "$1" = "-o" ]; then
46 OBJROOT="$2"
47 shift
48 shift
49 else
50 OBJROOT="./mozilla"
53 if [ "$1" = "-s" ]; then
54 SRCROOT="$2"
55 shift
56 shift
57 else
58 SRCROOT="./mozilla"
61 OSTYPE=`uname -s`
63 if [ $OSTYPE == "Darwin" ]; then
64 MANIFEST="$SRCROOT/embedding/config/basebrowser-mac-macho"
65 else
66 MANIFEST="$SRCROOT/embedding/config/basebrowser-unix"
70 # A little help for my friends.
72 if [ "-h" == "$1" ];then
73 SHOWHELP="1"
75 if [ "--help" == "$1" ];then
76 SHOWHELP="1"
78 if [ "" == "$1" ]; then
79 SHOWHELP="1"
81 if [ "" == "$2" ]; then
82 SHOWHELP="1"
84 if [ "" == "$3" ]; then
85 SHOWHELP="1"
90 # Show the help if required.
92 if [ $SHOWHELP ]; then
93 echo "usage: $0 <save_results> <old_results> <summary>"
94 echo " <save_results> is a file that will receive the results of this run."
95 echo " This file can be used in a future run as the old results."
96 echo " <old_results> is a results file from a previous run."
97 echo " It is used to diff with current results and come up with a summary"
98 echo " of changes."
99 echo " It is OK if the file does not exist, just supply the argument."
100 echo " <summary> is a file which will contain a human readable report."
101 echo " This file is most useful by providing more information than the"
102 echo " normally single digit output of this script."
103 echo ""
104 echo "Run this command from the parent directory of the mozilla tree."
105 echo ""
106 echo "This command will output two numbers to stdout that will represent"
107 echo " the total size of all code and data, and a delta from the prior."
108 echo " the old results."
109 echo "For much more detail on size drifts refer to the summary report."
110 echo ""
111 echo "This tool reports on executables listed in the following file:"
112 echo "$MANIFEST"
113 exit
118 # Stash our arguments away.
120 COPYSORTTSV="$1"
121 OLDTSVFILE="$2"
122 SUMMARYFILE="$3"
126 # On Mac OS X, use the --zerodrift option to maptsvdifftool
128 if [ $OSTYPE == "Darwin" ]; then
129 ZERODRIFT="--zerodrift"
130 else
131 ZERODRIFT=""
136 # Create our temporary directory.
137 # mktemp on Darwin doesn't support -d (suckage)
139 if [ $OSTYPE == "Darwin" ]; then
140 MYTMPDIR=`mktemp ./codesighs.tmp.XXXXXXXX`
141 rm $MYTMPDIR
142 mkdir $MYTMPDIR
143 else
144 MYTMPDIR=`mktemp -d ./codesighs.tmp.XXXXXXXX`
148 # Check whether we have 'eu-readelf' or 'readelf' available.
149 # If we do, it will give more accurate symbol sizes than nm.
151 if [ $OSTYPE == "Darwin" ]; then
152 USE_READELF=
153 else
154 READELF_PROG=`which eu-readelf 2>/dev/null | grep /eu-readelf$`
155 if test "$READELF_PROG"; then
156 USE_READELF=1
157 else
158 READELF_PROG=`which readelf 2>/dev/null | grep /readelf$`
159 if test "$READELF_PROG"; then
160 # Check whether we need -W
161 if readelf --help | grep "\--wide" >&/dev/null; then
162 READELF_PROG="readelf -W"
163 else
164 READELF_PROG="readelf"
166 USE_READELF=1
167 else
168 USE_READELF=
174 # Find all relevant files.
176 ALLFILES="$MYTMPDIR/allfiles.list"
177 grep -v '[\;\[]' < $MANIFEST | grep -v '^$' | sed "s|^|${OBJROOT}/dist/bin/|" > $ALLFILES
180 RAWTSVFILE="$MYTMPDIR/raw.tsv"
182 if test "$USE_READELF"; then
183 export READELF_PROG
184 xargs -n 1 $SRCROOT/tools/codesighs/readelf_wrap.pl < $ALLFILES > $RAWTSVFILE
185 else
188 # Produce the cumulative nm output.
189 # We are very particular on what switches to use.
190 # nm --format=bsd --size-sort --print-file-name --demangle
192 # Darwin (Mac OS X) has a lame nm that we have to wrap in a perl
193 # script to get decent output.
195 NMRESULTS="$MYTMPDIR/nm.txt"
196 if [ $OSTYPE == "Darwin" ]; then
197 xargs -n 1 $SRCROOT/tools/codesighs/nm_wrap_osx.pl < $ALLFILES > $NMRESULTS 2> /dev/null
198 else
199 xargs -n 1 nm --format=bsd --size-sort --print-file-name --demangle < $ALLFILES > $NMRESULTS 2> /dev/null
203 # Produce the TSV output.
205 $OBJROOT/dist/bin/nm2tsv --input $NMRESULTS > $RAWTSVFILE
207 fi # USE_READELF
210 # Sort the TSV output for useful diffing and eyeballing in general.
212 sort -r $RAWTSVFILE > $COPYSORTTSV
216 # If a historical file was specified, diff it with our sorted tsv values.
217 # Run it through a tool to summaries the diffs to the module
218 # level report.
219 # Otherwise, generate the module level report from our new data.
221 rm -f $SUMMARYFILE
222 DIFFFILE="$MYTMPDIR/diff.txt"
223 if [ -e $OLDTSVFILE ]; then
224 diff $OLDTSVFILE $COPYSORTTSV > $DIFFFILE
225 $OBJROOT/dist/bin/maptsvdifftool $ZERODRIFT --input $DIFFFILE >> $SUMMARYFILE
226 else
227 $OBJROOT/dist/bin/codesighs --modules --input $COPYSORTTSV >> $SUMMARYFILE
232 # Output our numbers, that will let tinderbox specify everything all
233 # at once.
234 # First number is in fact the total size of all code and data in the map
235 # files parsed.
236 # Second number, if present, is growth/shrinkage.
239 if [ $TINDERBOX_OUTPUT ]; then
240 echo -n "__codesize:"
242 $OBJROOT/dist/bin/codesighs --totalonly --input $COPYSORTTSV
244 if [ -e $DIFFFILE ]; then
245 if [ $TINDERBOX_OUTPUT ]; then
246 echo -n "__codesizeDiff:"
248 $OBJROOT/dist/bin/maptsvdifftool $ZERODRIFT --summary --input $DIFFFILE
252 # Remove our temporary directory.
254 rm -rf $MYTMPDIR