2 * arch/arm/mach-ixp23xx/roadrunner.c
4 * RoadRunner board-specific routines
6 * Author: Deepak Saxena <dsaxena@plexity.net>
8 * Copyright 2005 (c) MontaVista Software, Inc.
10 * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation
12 * This file is licensed under the terms of the GNU General Public
13 * License version 2. This program is licensed "as is" without any
14 * warranty of any kind, whether express or implied.
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/spinlock.h>
20 #include <linux/sched.h>
21 #include <linux/interrupt.h>
22 #include <linux/serial.h>
23 #include <linux/tty.h>
24 #include <linux/bitops.h>
25 #include <linux/ioport.h>
26 #include <linux/serial_8250.h>
27 #include <linux/serial_core.h>
28 #include <linux/device.h>
30 #include <linux/pci.h>
31 #include <linux/mtd/physmap.h>
33 #include <asm/types.h>
34 #include <asm/setup.h>
35 #include <asm/memory.h>
36 #include <mach/hardware.h>
37 #include <asm/mach-types.h>
39 #include <asm/system.h>
40 #include <asm/tlbflush.h>
41 #include <asm/pgtable.h>
43 #include <asm/mach/map.h>
44 #include <asm/mach/irq.h>
45 #include <asm/mach/arch.h>
46 #include <asm/mach/pci.h>
51 #define INTA IRQ_ROADRUNNER_PCI_INTA
52 #define INTB IRQ_ROADRUNNER_PCI_INTB
53 #define INTC IRQ_ROADRUNNER_PCI_INTC
54 #define INTD IRQ_ROADRUNNER_PCI_INTD
56 #define INTC_PIN IXP23XX_GPIO_PIN_11
57 #define INTD_PIN IXP23XX_GPIO_PIN_12
59 static int __init
roadrunner_map_irq(struct pci_dev
*dev
, u8 idsel
, u8 pin
)
61 static int pci_card_slot_irq
[] = {INTB
, INTC
, INTD
, INTA
};
62 static int pmc_card_slot_irq
[] = {INTA
, INTB
, INTC
, INTD
};
63 static int usb_irq
[] = {INTB
, INTC
, INTD
, -1};
64 static int mini_pci_1_irq
[] = {INTB
, INTC
, -1, -1};
65 static int mini_pci_2_irq
[] = {INTC
, INTD
, -1, -1};
67 switch(dev
->bus
->number
) {
70 case 0x0: // PCI-PCI bridge
72 case 0x8: // PCI Card Slot
73 return pci_card_slot_irq
[pin
- 1];
74 case 0x10: // PMC Slot
75 return pmc_card_slot_irq
[pin
- 1];
76 case 0x18: // PMC Slot Secondary Agent
78 case 0x20: // IXP Processor
87 case 0x0: // IDE Controller
88 return (pin
== 1) ? INTC
: -1;
89 case 0x8: // USB fun 0
90 case 0x9: // USB fun 1
91 case 0xa: // USB fun 2
92 return usb_irq
[pin
- 1];
93 case 0x10: // Mini PCI 1
94 return mini_pci_1_irq
[pin
-1];
95 case 0x18: // Mini PCI 2
96 return mini_pci_2_irq
[pin
-1];
97 case 0x20: // MEM slot
98 return (pin
== 1) ? INTA
: -1;
111 static void __init
roadrunner_pci_preinit(void)
113 irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTC
, IRQ_TYPE_LEVEL_LOW
);
114 irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTD
, IRQ_TYPE_LEVEL_LOW
);
116 ixp23xx_pci_preinit();
119 static struct hw_pci roadrunner_pci __initdata
= {
121 .preinit
= roadrunner_pci_preinit
,
122 .setup
= ixp23xx_pci_setup
,
123 .scan
= ixp23xx_pci_scan_bus
,
124 .map_irq
= roadrunner_map_irq
,
127 static int __init
roadrunner_pci_init(void)
129 if (machine_is_roadrunner())
130 pci_common_init(&roadrunner_pci
);
135 subsys_initcall(roadrunner_pci_init
);
137 static struct physmap_flash_data roadrunner_flash_data
= {
141 static struct resource roadrunner_flash_resource
= {
144 .flags
= IORESOURCE_MEM
,
147 static struct platform_device roadrunner_flash
= {
148 .name
= "physmap-flash",
151 .platform_data
= &roadrunner_flash_data
,
154 .resource
= &roadrunner_flash_resource
,
157 static void __init
roadrunner_init(void)
159 platform_device_register(&roadrunner_flash
);
162 * Mark flash as writeable
164 IXP23XX_EXP_CS0
[0] |= IXP23XX_FLASH_WRITABLE
;
165 IXP23XX_EXP_CS0
[1] |= IXP23XX_FLASH_WRITABLE
;
166 IXP23XX_EXP_CS0
[2] |= IXP23XX_FLASH_WRITABLE
;
167 IXP23XX_EXP_CS0
[3] |= IXP23XX_FLASH_WRITABLE
;
172 MACHINE_START(ROADRUNNER
, "ADI Engineering RoadRunner Development Platform")
173 /* Maintainer: Deepak Saxena */
174 .map_io
= ixp23xx_map_io
,
175 .init_irq
= ixp23xx_init_irq
,
176 .timer
= &ixp23xx_timer
,
177 .boot_params
= 0x00000100,
178 .init_machine
= roadrunner_init
,