| blob | 167044f7de1d6e2102a02ee526f4ebeadeab607e |
1 /*
2 * Keymile KMETER1 Device Tree Source
3 *
4 * 2008 DENX Software Engineering GmbH
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
12 /dts-v1/;
14 / {
15 model = "KMETER1";
16 compatible = "keymile,KMETER1";
17 #address-cells = <1>;
18 #size-cells = <1>;
20 aliases {
21 ethernet0 = &enet_piggy2;
22 ethernet1 = &enet_estar1;
23 ethernet2 = &enet_estar2;
24 ethernet3 = &enet_eth1;
25 ethernet4 = &enet_eth2;
26 ethernet5 = &enet_eth3;
27 ethernet6 = &enet_eth4;
28 serial0 = &serial0;
29 };
31 cpus {
32 #address-cells = <1>;
33 #size-cells = <0>;
35 PowerPC,8360@0 {
36 device_type = "cpu";
37 reg = <0x0>;
38 d-cache-line-size = <32>; // 32 bytes
39 i-cache-line-size = <32>; // 32 bytes
40 d-cache-size = <32768>; // L1, 32K
41 i-cache-size = <32768>; // L1, 32K
42 timebase-frequency = <0>; /* Filled in by U-Boot */
43 bus-frequency = <0>; /* Filled in by U-Boot */
44 clock-frequency = <0>; /* Filled in by U-Boot */
45 };
46 };
48 memory {
49 device_type = "memory";
50 reg = <0 0>; /* Filled in by U-Boot */
51 };
53 soc8360@e0000000 {
54 #address-cells = <1>;
55 #size-cells = <1>;
56 device_type = "soc";
57 compatible = "fsl,mpc8360-immr", "simple-bus";
58 ranges = <0x0 0xe0000000 0x00200000>;
59 reg = <0xe0000000 0x00000200>;
60 bus-frequency = <0>; /* Filled in by U-Boot */
62 i2c@3000 {
63 #address-cells = <1>;
64 #size-cells = <0>;
65 cell-index = <0>;
66 compatible = "fsl-i2c";
67 reg = <0x3000 0x100>;
68 interrupts = <14 0x8>;
69 interrupt-parent = <&ipic>;
70 dfsrr;
71 };
73 serial0: serial@4500 {
74 cell-index = <0>;
75 device_type = "serial";
76 compatible = "ns16550";
77 reg = <0x4500 0x100>;
78 clock-frequency = <264000000>;
79 interrupts = <9 0x8>;
80 interrupt-parent = <&ipic>;
81 };
83 dma@82a8 {
84 #address-cells = <1>;
85 #size-cells = <1>;
86 compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
87 reg = <0x82a8 4>;
88 ranges = <0 0x8100 0x1a8>;
89 interrupt-parent = <&ipic>;
90 interrupts = <71 8>;
91 cell-index = <0>;
92 dma-channel@0 {
93 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
94 reg = <0 0x80>;
95 interrupt-parent = <&ipic>;
96 interrupts = <71 8>;
97 };
98 dma-channel@80 {
99 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
100 reg = <0x80 0x80>;
101 interrupt-parent = <&ipic>;
102 interrupts = <71 8>;
103 };
104 dma-channel@100 {
105 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
106 reg = <0x100 0x80>;
107 interrupt-parent = <&ipic>;
108 interrupts = <71 8>;
109 };
110 dma-channel@180 {
111 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
112 reg = <0x180 0x28>;
113 interrupt-parent = <&ipic>;
114 interrupts = <71 8>;
115 };
116 };
118 ipic: pic@700 {
119 #address-cells = <0>;
120 #interrupt-cells = <2>;
121 compatible = "fsl,pq2pro-pic", "fsl,ipic";
122 interrupt-controller;
123 reg = <0x700 0x100>;
124 };
126 par_io@1400 {
127 #address-cells = <1>;
128 #size-cells = <0>;
129 reg = <0x1400 0x100>;
130 compatible = "fsl,mpc8360-par_io";
131 num-ports = <7>;
133 pio_ucc1: ucc_pin@0 {
134 reg = <0>;
136 pio-map = <
137 /* port pin dir open_drain assignment has_irq */
138 0 1 3 0 2 0 /* MDIO */
139 0 2 1 0 1 0 /* MDC */
141 0 3 1 0 1 0 /* TxD0 */
142 0 4 1 0 1 0 /* TxD1 */
143 0 5 1 0 1 0 /* TxD2 */
144 0 6 1 0 1 0 /* TxD3 */
145 0 9 2 0 1 0 /* RxD0 */
146 0 10 2 0 1 0 /* RxD1 */
147 0 11 2 0 1 0 /* RxD2 */
148 0 12 2 0 1 0 /* RxD3 */
149 0 7 1 0 1 0 /* TX_EN */
150 0 8 1 0 1 0 /* TX_ER */
151 0 15 2 0 1 0 /* RX_DV */
152 0 16 2 0 1 0 /* RX_ER */
153 0 0 2 0 1 0 /* RX_CLK */
154 2 9 1 0 3 0 /* GTX_CLK - CLK10 */
155 2 8 2 0 1 0 /* GTX125 - CLK9 */
156 >;
157 };
159 pio_ucc2: ucc_pin@1 {
160 reg = <1>;
162 pio-map = <
163 /* port pin dir open_drain assignment has_irq */
164 0 1 3 0 2 0 /* MDIO */
165 0 2 1 0 1 0 /* MDC */
167 0 17 1 0 1 0 /* TxD0 */
168 0 18 1 0 1 0 /* TxD1 */
169 0 19 1 0 1 0 /* TxD2 */
170 0 20 1 0 1 0 /* TxD3 */
171 0 23 2 0 1 0 /* RxD0 */
172 0 24 2 0 1 0 /* RxD1 */
173 0 25 2 0 1 0 /* RxD2 */
174 0 26 2 0 1 0 /* RxD3 */
175 0 21 1 0 1 0 /* TX_EN */
176 0 22 1 0 1 0 /* TX_ER */
177 0 29 2 0 1 0 /* RX_DV */
178 0 30 2 0 1 0 /* RX_ER */
179 0 31 2 0 1 0 /* RX_CLK */
180 2 2 1 0 2 0 /* GTX_CLK - CLK3 */
181 2 3 2 0 1 0 /* GTX125 - CLK4 */
182 >;
183 };
185 pio_ucc4: ucc_pin@3 {
186 reg = <3>;
188 pio-map = <
189 /* port pin dir open_drain assignment has_irq */
190 0 1 3 0 2 0 /* MDIO */
191 0 2 1 0 1 0 /* MDC */
193 1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */
194 1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */
195 1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */
196 1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */
197 1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */
198 1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */
199 1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */
201 2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */
202 >;
203 };
205 pio_ucc5: ucc_pin@4 {
206 reg = <4>;
208 pio-map = <
209 /* port pin dir open_drain assignment has_irq */
210 0 1 3 0 2 0 /* MDIO */
211 0 2 1 0 1 0 /* MDC */
213 3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */
214 3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */
215 3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */
216 3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */
217 3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */
218 3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */
219 3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */
220 >;
221 };
223 pio_ucc6: ucc_pin@5 {
224 reg = <5>;
226 pio-map = <
227 /* port pin dir open_drain assignment has_irq */
228 0 1 3 0 2 0 /* MDIO */
229 0 2 1 0 1 0 /* MDC */
231 3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */
232 3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */
233 3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */
234 3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */
235 3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */
236 3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */
237 3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */
238 >;
239 };
241 pio_ucc7: ucc_pin@6 {
242 reg = <6>;
244 pio-map = <
245 /* port pin dir open_drain assignment has_irq */
246 0 1 3 0 2 0 /* MDIO */
247 0 2 1 0 1 0 /* MDC */
249 4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */
250 4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */
251 4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */
252 4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */
253 4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */
254 4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */
255 4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */
256 >;
257 };
259 pio_ucc8: ucc_pin@7 {
260 reg = <7>;
262 pio-map = <
263 /* port pin dir open_drain assignment has_irq */
264 0 1 3 0 2 0 /* MDIO */
265 0 2 1 0 1 0 /* MDC */
267 4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */
268 4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */
269 4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */
270 4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */
271 4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */
272 4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */
273 4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */
275 2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */
276 >;
277 };
279 };
281 qe@100000 {
282 #address-cells = <1>;
283 #size-cells = <1>;
284 compatible = "fsl,qe";
285 ranges = <0x0 0x100000 0x100000>;
286 reg = <0x100000 0x480>;
287 clock-frequency = <0>; /* Filled in by U-Boot */
288 brg-frequency = <0>; /* Filled in by U-Boot */
289 bus-frequency = <0>; /* Filled in by U-Boot */
291 muram@10000 {
292 #address-cells = <1>;
293 #size-cells = <1>;
294 compatible = "fsl,qe-muram", "fsl,cpm-muram";
295 ranges = <0x0 0x00010000 0x0000c000>;
297 data-only@0 {
298 compatible = "fsl,qe-muram-data",
299 "fsl,cpm-muram-data";
300 reg = <0x0 0xc000>;
301 };
302 };
304 /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
305 enet_estar1: ucc@2000 {
306 device_type = "network";
307 compatible = "ucc_geth";
308 cell-index = <1>;
309 reg = <0x2000 0x200>;
310 interrupts = <32>;
311 interrupt-parent = <&qeic>;
312 local-mac-address = [ 00 00 00 00 00 00 ];
313 rx-clock-name = "none";
314 tx-clock-name = "clk9";
315 phy-handle = <&phy_estar1>;
316 phy-connection-type = "rgmii-id";
317 pio-handle = <&pio_ucc1>;
318 };
320 /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
321 enet_estar2: ucc@3000 {
322 device_type = "network";
323 compatible = "ucc_geth";
324 cell-index = <2>;
325 reg = <0x3000 0x200>;
326 interrupts = <33>;
327 interrupt-parent = <&qeic>;
328 local-mac-address = [ 00 00 00 00 00 00 ];
329 rx-clock-name = "none";
330 tx-clock-name = "clk4";
331 phy-handle = <&phy_estar2>;
332 phy-connection-type = "rgmii-id";
333 pio-handle = <&pio_ucc2>;
334 };
336 /* Piggy2 (UCC4, MDIO 0x00, RMII) */
337 enet_piggy2: ucc@3200 {
338 device_type = "network";
339 compatible = "ucc_geth";
340 cell-index = <4>;
341 reg = <0x3200 0x200>;
342 interrupts = <35>;
343 interrupt-parent = <&qeic>;
344 local-mac-address = [ 00 00 00 00 00 00 ];
345 rx-clock-name = "none";
346 tx-clock-name = "clk17";
347 phy-handle = <&phy_piggy2>;
348 phy-connection-type = "rmii";
349 pio-handle = <&pio_ucc4>;
350 };
352 /* Eth-1 (UCC5, MDIO 0x08, RMII) */
353 enet_eth1: ucc@2400 {
354 device_type = "network";
355 compatible = "ucc_geth";
356 cell-index = <5>;
357 reg = <0x2400 0x200>;
358 interrupts = <40>;
359 interrupt-parent = <&qeic>;
360 local-mac-address = [ 00 00 00 00 00 00 ];
361 rx-clock-name = "none";
362 tx-clock-name = "clk16";
363 phy-handle = <&phy_eth1>;
364 phy-connection-type = "rmii";
365 pio-handle = <&pio_ucc5>;
366 };
368 /* Eth-2 (UCC6, MDIO 0x09, RMII) */
369 enet_eth2: ucc@3400 {
370 device_type = "network";
371 compatible = "ucc_geth";
372 cell-index = <6>;
373 reg = <0x3400 0x200>;
374 interrupts = <41>;
375 interrupt-parent = <&qeic>;
376 local-mac-address = [ 00 00 00 00 00 00 ];
377 rx-clock-name = "none";
378 tx-clock-name = "clk16";
379 phy-handle = <&phy_eth2>;
380 phy-connection-type = "rmii";
381 pio-handle = <&pio_ucc6>;
382 };
384 /* Eth-3 (UCC7, MDIO 0x0a, RMII) */
385 enet_eth3: ucc@2600 {
386 device_type = "network";
387 compatible = "ucc_geth";
388 cell-index = <7>;
389 reg = <0x2600 0x200>;
390 interrupts = <42>;
391 interrupt-parent = <&qeic>;
392 local-mac-address = [ 00 00 00 00 00 00 ];
393 rx-clock-name = "none";
394 tx-clock-name = "clk16";
395 phy-handle = <&phy_eth3>;
396 phy-connection-type = "rmii";
397 pio-handle = <&pio_ucc7>;
398 };
400 /* Eth-4 (UCC8, MDIO 0x0b, RMII) */
401 enet_eth4: ucc@3600 {
402 device_type = "network";
403 compatible = "ucc_geth";
404 cell-index = <8>;
405 reg = <0x3600 0x200>;
406 interrupts = <43>;
407 interrupt-parent = <&qeic>;
408 local-mac-address = [ 00 00 00 00 00 00 ];
409 rx-clock-name = "none";
410 tx-clock-name = "clk16";
411 phy-handle = <&phy_eth4>;
412 phy-connection-type = "rmii";
413 pio-handle = <&pio_ucc8>;
414 };
416 mdio@3320 {
417 #address-cells = <1>;
418 #size-cells = <0>;
419 reg = <0x3320 0x18>;
420 compatible = "fsl,ucc-mdio";
422 /* Piggy2 (UCC4, MDIO 0x00, RMII) */
423 phy_piggy2: ethernet-phy@00 {
424 reg = <0x0>;
425 };
427 /* Eth-1 (UCC5, MDIO 0x08, RMII) */
428 phy_eth1: ethernet-phy@08 {
429 reg = <0x08>;
430 };
432 /* Eth-2 (UCC6, MDIO 0x09, RMII) */
433 phy_eth2: ethernet-phy@09 {
434 reg = <0x09>;
435 };
437 /* Eth-3 (UCC7, MDIO 0x0a, RMII) */
438 phy_eth3: ethernet-phy@0a {
439 reg = <0x0a>;
440 };
442 /* Eth-4 (UCC8, MDIO 0x0b, RMII) */
443 phy_eth4: ethernet-phy@0b {
444 reg = <0x0b>;
445 };
447 /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
448 phy_estar1: ethernet-phy@10 {
449 interrupt-parent = <&ipic>;
450 interrupts = <17 0x8>;
451 reg = <0x10>;
452 };
454 /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
455 phy_estar2: ethernet-phy@11 {
456 interrupt-parent = <&ipic>;
457 interrupts = <18 0x8>;
458 reg = <0x11>;
459 };
460 };
462 qeic: interrupt-controller@80 {
463 interrupt-controller;
464 compatible = "fsl,qe-ic";
465 #address-cells = <0>;
466 #interrupt-cells = <1>;
467 reg = <0x80 0x80>;
468 interrupts = <32 8 33 8>;
469 interrupt-parent = <&ipic>;
470 };
471 };
472 };
474 localbus@e0005000 {
475 #address-cells = <2>;
476 #size-cells = <1>;
477 compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
478 "simple-bus";
479 reg = <0xe0005000 0xd8>;
480 ranges = <0 0 0xf0000000 0x04000000>; /* Filled in by U-Boot */
482 flash@f0000000,0 {
483 compatible = "cfi-flash";
484 /*
485 * The Intel P30 chip has 2 non-identical chips on
486 * one die, so we need to define 2 seperate regions
487 * that are scanned by physmap_of independantly.
488 */
489 reg = <0 0x00000000 0x02000000
490 0 0x02000000 0x02000000>; /* Filled in by U-Boot */
491 bank-width = <2>;
492 #address-cells = <1>;
493 #size-cells = <1>;
494 partition@0 {
495 label = "u-boot";
496 reg = <0 0x40000>;
497 };
498 partition@40000 {
499 label = "env";
500 reg = <0x40000 0x40000>;
501 };
502 partition@80000 {
503 label = "dtb";
504 reg = <0x80000 0x20000>;
505 };
506 partition@a0000 {
507 label = "kernel";
508 reg = <0xa0000 0x300000>;
509 };
510 partition@3a0000 {
511 label = "ramdisk";
512 reg = <0x3a0000 0x800000>;
513 };
514 partition@ba0000 {
515 label = "user";
516 reg = <0xba0000 0x3460000>;
517 };
518 };
519 };
520 };