?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
add_ping_req memory corruption fix, neighbor state switching, honor states in generat...
[cor_2_6_31.git] / arch / powerpc / kernel / head_booke.h
blob5f9febc8d1431c4daebb711f1496f9e1069a1b7e
1 #ifndef __HEAD_BOOKE_H__
2 #define __HEAD_BOOKE_H__
3
4 /*
5 * Macros used for common Book-e exception handling
6 */
7
8 #define SET_IVOR(vector_number, vector_label) \
9 li r26,vector_label@l; \
10 mtspr SPRN_IVOR##vector_number,r26; \
11 sync
12
13 #if (THREAD_SHIFT < 15)
14 #define ALLOC_STACK_FRAME(reg, val) \
15 addi reg,reg,val
16 #else
17 #define ALLOC_STACK_FRAME(reg, val) \
18 addis reg,reg,val@ha; \
19 addi reg,reg,val@l
20 #endif
21
22 #define NORMAL_EXCEPTION_PROLOG \
23 mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
24 mtspr SPRN_SPRG1,r11; \
25 mtspr SPRN_SPRG4W,r1; \
26 mfcr r10; /* save CR in r10 for now */\
27 mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
28 andi. r11,r11,MSR_PR; \
29 beq 1f; \
30 mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\
31 lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
32 ALLOC_STACK_FRAME(r1, THREAD_SIZE); \
33 1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
34 mr r11,r1; \
35 stw r10,_CCR(r11); /* save various registers */\
36 stw r12,GPR12(r11); \
37 stw r9,GPR9(r11); \
38 mfspr r10,SPRN_SPRG0; \
39 stw r10,GPR10(r11); \
40 mfspr r12,SPRN_SPRG1; \
41 stw r12,GPR11(r11); \
42 mflr r10; \
43 stw r10,_LINK(r11); \
44 mfspr r10,SPRN_SPRG4R; \
45 mfspr r12,SPRN_SRR0; \
46 stw r10,GPR1(r11); \
47 mfspr r9,SPRN_SRR1; \
48 stw r10,0(r11); \
49 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
50 stw r0,GPR0(r11); \
51 SAVE_4GPRS(3, r11); \
52 SAVE_2GPRS(7, r11)
53
54 /* To handle the additional exception priority levels on 40x and Book-E
55 * processors we allocate a stack per additional priority level.
56 *
57 * On 40x critical is the only additional level
58 * On 44x/e500 we have critical and machine check
59 * On e200 we have critical and debug (machine check occurs via critical)
60 *
61 * Additionally we reserve a SPRG for each priority level so we can free up a
62 * GPR to use as the base for indirect access to the exception stacks. This
63 * is necessary since the MMU is always on, for Book-E parts, and the stacks
64 * are offset from KERNELBASE.
65 *
66 * There is some space optimization to be had here if desired. However
67 * to allow for a common kernel with support for debug exceptions either
68 * going to critical or their own debug level we aren't currently
69 * providing configurations that micro-optimize space usage.
70 */
71
72 /* CRIT_SPRG only used in critical exception handling */
73 #define CRIT_SPRG SPRN_SPRG2
74 /* MCHECK_SPRG only used in machine check exception handling */
75 #define MCHECK_SPRG SPRN_SPRG6W
76
77 #define MCHECK_STACK_BASE mcheckirq_ctx
78 #define CRIT_STACK_BASE critirq_ctx
79
80 /* only on e500mc/e200 */
81 #define DEBUG_STACK_BASE dbgirq_ctx
82 #ifdef CONFIG_E200
83 #define DEBUG_SPRG SPRN_SPRG6W
84 #else
85 #define DEBUG_SPRG SPRN_SPRG9
86 #endif
87
88 #define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
89
90 #ifdef CONFIG_SMP
91 #define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
92 mfspr r8,SPRN_PIR; \
93 slwi r8,r8,2; \
94 addis r8,r8,level##_STACK_BASE@ha; \
95 lwz r8,level##_STACK_BASE@l(r8); \
96 addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
97 #else
98 #define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
99 lis r8,level##_STACK_BASE@ha; \
100 lwz r8,level##_STACK_BASE@l(r8); \
101 addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
102 #endif
103
104 /*
105 * Exception prolog for critical/machine check exceptions. This is a
106 * little different from the normal exception prolog above since a
107 * critical/machine check exception can potentially occur at any point
108 * during normal exception processing. Thus we cannot use the same SPRG
109 * registers as the normal prolog above. Instead we use a portion of the
110 * critical/machine check exception stack at low physical addresses.
111 */
112 #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
113 mtspr exc_level##_SPRG,r8; \
114 BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
115 stw r9,GPR9(r8); /* save various registers */\
116 mfcr r9; /* save CR in r9 for now */\
117 stw r10,GPR10(r8); \
118 stw r11,GPR11(r8); \
119 stw r9,_CCR(r8); /* save CR on stack */\
120 mfspr r10,exc_level_srr1; /* check whether user or kernel */\
121 andi. r10,r10,MSR_PR; \
122 mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\
123 lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
124 addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\
125 beq 1f; \
126 /* COMING FROM USER MODE */ \
127 stw r9,_CCR(r11); /* save CR */\
128 lwz r10,GPR10(r8); /* copy regs from exception stack */\
129 lwz r9,GPR9(r8); \
130 stw r10,GPR10(r11); \
131 lwz r10,GPR11(r8); \
132 stw r9,GPR9(r11); \
133 stw r10,GPR11(r11); \
134 b 2f; \
135 /* COMING FROM PRIV MODE */ \
136 1: lwz r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r11); \
137 lwz r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r11); \
138 stw r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r8); \
139 stw r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r8); \
140 lwz r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11); \
141 stw r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8); \
142 mr r11,r8; \
143 2: mfspr r8,exc_level##_SPRG; \
144 stw r12,GPR12(r11); /* save various registers */\
145 mflr r10; \
146 stw r10,_LINK(r11); \
147 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
148 stw r12,_DEAR(r11); /* since they may have had stuff */\
149 mfspr r9,SPRN_ESR; /* in them at the point where the */\
150 stw r9,_ESR(r11); /* exception was taken */\
151 mfspr r12,exc_level_srr0; \
152 stw r1,GPR1(r11); \
153 mfspr r9,exc_level_srr1; \
154 stw r1,0(r11); \
155 mr r1,r11; \
156 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
157 stw r0,GPR0(r11); \
158 SAVE_4GPRS(3, r11); \
159 SAVE_2GPRS(7, r11)
160
161 #define CRITICAL_EXCEPTION_PROLOG \
162 EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1)
163 #define DEBUG_EXCEPTION_PROLOG \
164 EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1)
165 #define MCHECK_EXCEPTION_PROLOG \
166 EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1)
167
168 /*
169 * Exception vectors.
170 */
171 #define START_EXCEPTION(label) \
172 .align 5; \
173 label:
174
175 #define FINISH_EXCEPTION(func) \
176 bl transfer_to_handler_full; \
177 .long func; \
178 .long ret_from_except_full
179
180 #define EXCEPTION(n, label, hdlr, xfer) \
181 START_EXCEPTION(label); \
182 NORMAL_EXCEPTION_PROLOG; \
183 addi r3,r1,STACK_FRAME_OVERHEAD; \
184 xfer(n, hdlr)
185
186 #define CRITICAL_EXCEPTION(n, label, hdlr) \
187 START_EXCEPTION(label); \
188 CRITICAL_EXCEPTION_PROLOG; \
189 addi r3,r1,STACK_FRAME_OVERHEAD; \
190 EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
191 NOCOPY, crit_transfer_to_handler, \
192 ret_from_crit_exc)
193
194 #define MCHECK_EXCEPTION(n, label, hdlr) \
195 START_EXCEPTION(label); \
196 MCHECK_EXCEPTION_PROLOG; \
197 mfspr r5,SPRN_ESR; \
198 stw r5,_ESR(r11); \
199 addi r3,r1,STACK_FRAME_OVERHEAD; \
200 EXC_XFER_TEMPLATE(hdlr, n+4, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
201 NOCOPY, mcheck_transfer_to_handler, \
202 ret_from_mcheck_exc)
203
204 #define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
205 li r10,trap; \
206 stw r10,_TRAP(r11); \
207 lis r10,msr@h; \
208 ori r10,r10,msr@l; \
209 copyee(r10, r9); \
210 bl tfer; \
211 .long hdlr; \
212 .long ret
213
214 #define COPY_EE(d, s) rlwimi d,s,0,16,16
215 #define NOCOPY(d, s)
216
217 #define EXC_XFER_STD(n, hdlr) \
218 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
219 ret_from_except_full)
220
221 #define EXC_XFER_LITE(n, hdlr) \
222 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
223 ret_from_except)
224
225 #define EXC_XFER_EE(n, hdlr) \
226 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
227 ret_from_except_full)
228
229 #define EXC_XFER_EE_LITE(n, hdlr) \
230 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
231 ret_from_except)
232
233 /* Check for a single step debug exception while in an exception
234 * handler before state has been saved. This is to catch the case
235 * where an instruction that we are trying to single step causes
236 * an exception (eg ITLB/DTLB miss) and thus the first instruction of
237 * the exception handler generates a single step debug exception.
238 *
239 * If we get a debug trap on the first instruction of an exception handler,
240 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
241 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
242 * The exception handler was handling a non-critical interrupt, so it will
243 * save (and later restore) the MSR via SPRN_CSRR1, which will still have
244 * the MSR_DE bit set.
245 */
246 #define DEBUG_DEBUG_EXCEPTION \
247 START_EXCEPTION(DebugDebug); \
248 DEBUG_EXCEPTION_PROLOG; \
249 \
250 /* \
251 * If there is a single step or branch-taken exception in an \
252 * exception entry sequence, it was probably meant to apply to \
253 * the code where the exception occurred (since exception entry \
254 * doesn't turn off DE automatically). We simulate the effect \
255 * of turning off DE on entry to an exception handler by turning \
256 * off DE in the DSRR1 value and clearing the debug status. \
257 */ \
258 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
259 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
260 beq+ 2f; \
261 \
262 lis r10,KERNELBASE@h; /* check if exception in vectors */ \
263 ori r10,r10,KERNELBASE@l; \
264 cmplw r12,r10; \
265 blt+ 2f; /* addr below exception vectors */ \
266 \
267 lis r10,DebugDebug@h; \
268 ori r10,r10,DebugDebug@l; \
269 cmplw r12,r10; \
270 bgt+ 2f; /* addr above exception vectors */ \
271 \
272 /* here it looks like we got an inappropriate debug exception. */ \
273 1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \
274 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
275 mtspr SPRN_DBSR,r10; \
276 /* restore state and get out */ \
277 lwz r10,_CCR(r11); \
278 lwz r0,GPR0(r11); \
279 lwz r1,GPR1(r11); \
280 mtcrf 0x80,r10; \
281 mtspr SPRN_DSRR0,r12; \
282 mtspr SPRN_DSRR1,r9; \
283 lwz r9,GPR9(r11); \
284 lwz r12,GPR12(r11); \
285 mtspr DEBUG_SPRG,r8; \
286 BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
287 lwz r10,GPR10(r8); \
288 lwz r11,GPR11(r8); \
289 mfspr r8,DEBUG_SPRG; \
290 \
291 PPC_RFDI; \
292 b .; \
293 \
294 /* continue normal handling for a debug exception... */ \
295 2: mfspr r4,SPRN_DBSR; \
296 addi r3,r1,STACK_FRAME_OVERHEAD; \
297 EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
298
299 #define DEBUG_CRIT_EXCEPTION \
300 START_EXCEPTION(DebugCrit); \
301 CRITICAL_EXCEPTION_PROLOG; \
302 \
303 /* \
304 * If there is a single step or branch-taken exception in an \
305 * exception entry sequence, it was probably meant to apply to \
306 * the code where the exception occurred (since exception entry \
307 * doesn't turn off DE automatically). We simulate the effect \
308 * of turning off DE on entry to an exception handler by turning \
309 * off DE in the CSRR1 value and clearing the debug status. \
310 */ \
311 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
312 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
313 beq+ 2f; \
314 \
315 lis r10,KERNELBASE@h; /* check if exception in vectors */ \
316 ori r10,r10,KERNELBASE@l; \
317 cmplw r12,r10; \
318 blt+ 2f; /* addr below exception vectors */ \
319 \
320 lis r10,DebugCrit@h; \
321 ori r10,r10,DebugCrit@l; \
322 cmplw r12,r10; \
323 bgt+ 2f; /* addr above exception vectors */ \
324 \
325 /* here it looks like we got an inappropriate debug exception. */ \
326 1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \
327 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
328 mtspr SPRN_DBSR,r10; \
329 /* restore state and get out */ \
330 lwz r10,_CCR(r11); \
331 lwz r0,GPR0(r11); \
332 lwz r1,GPR1(r11); \
333 mtcrf 0x80,r10; \
334 mtspr SPRN_CSRR0,r12; \
335 mtspr SPRN_CSRR1,r9; \
336 lwz r9,GPR9(r11); \
337 lwz r12,GPR12(r11); \
338 mtspr CRIT_SPRG,r8; \
339 BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \
340 lwz r10,GPR10(r8); \
341 lwz r11,GPR11(r8); \
342 mfspr r8,CRIT_SPRG; \
343 \
344 rfci; \
345 b .; \
346 \
347 /* continue normal handling for a critical exception... */ \
348 2: mfspr r4,SPRN_DBSR; \
349 addi r3,r1,STACK_FRAME_OVERHEAD; \
350 EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
351
352 #define DATA_STORAGE_EXCEPTION \
353 START_EXCEPTION(DataStorage) \
354 NORMAL_EXCEPTION_PROLOG; \
355 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
356 stw r5,_ESR(r11); \
357 mfspr r4,SPRN_DEAR; /* Grab the DEAR */ \
358 EXC_XFER_EE_LITE(0x0300, handle_page_fault)
359
360 #define INSTRUCTION_STORAGE_EXCEPTION \
361 START_EXCEPTION(InstructionStorage) \
362 NORMAL_EXCEPTION_PROLOG; \
363 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
364 stw r5,_ESR(r11); \
365 mr r4,r12; /* Pass SRR0 as arg2 */ \
366 li r5,0; /* Pass zero as arg3 */ \
367 EXC_XFER_EE_LITE(0x0400, handle_page_fault)
368
369 #define ALIGNMENT_EXCEPTION \
370 START_EXCEPTION(Alignment) \
371 NORMAL_EXCEPTION_PROLOG; \
372 mfspr r4,SPRN_DEAR; /* Grab the DEAR and save it */ \
373 stw r4,_DEAR(r11); \
374 addi r3,r1,STACK_FRAME_OVERHEAD; \
375 EXC_XFER_EE(0x0600, alignment_exception)
376
377 #define PROGRAM_EXCEPTION \
378 START_EXCEPTION(Program) \
379 NORMAL_EXCEPTION_PROLOG; \
380 mfspr r4,SPRN_ESR; /* Grab the ESR and save it */ \
381 stw r4,_ESR(r11); \
382 addi r3,r1,STACK_FRAME_OVERHEAD; \
383 EXC_XFER_STD(0x0700, program_check_exception)
384
385 #define DECREMENTER_EXCEPTION \
386 START_EXCEPTION(Decrementer) \
387 NORMAL_EXCEPTION_PROLOG; \
388 lis r0,TSR_DIS@h; /* Setup the DEC interrupt mask */ \
389 mtspr SPRN_TSR,r0; /* Clear the DEC interrupt */ \
390 addi r3,r1,STACK_FRAME_OVERHEAD; \
391 EXC_XFER_LITE(0x0900, timer_interrupt)
392
393 #define FP_UNAVAILABLE_EXCEPTION \
394 START_EXCEPTION(FloatingPointUnavailable) \
395 NORMAL_EXCEPTION_PROLOG; \
396 beq 1f; \
397 bl load_up_fpu; /* if from user, just load it up */ \
398 b fast_exception_return; \
399 1: addi r3,r1,STACK_FRAME_OVERHEAD; \
400 EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
401
402 #ifndef __ASSEMBLY__
403 struct exception_regs {
404 unsigned long mas0;
405 unsigned long mas1;
406 unsigned long mas2;
407 unsigned long mas3;
408 unsigned long mas6;
409 unsigned long mas7;
410 unsigned long srr0;
411 unsigned long srr1;
412 unsigned long csrr0;
413 unsigned long csrr1;
414 unsigned long dsrr0;
415 unsigned long dsrr1;
416 unsigned long saved_ksp_limit;
417 };
418
419 /* ensure this structure is always sized to a multiple of the stack alignment */
420 #define STACK_EXC_LVL_FRAME_SIZE _ALIGN_UP(sizeof (struct exception_regs), 16)
421
422 #endif /* __ASSEMBLY__ */
423 #endif /* __HEAD_BOOKE_H__ */
connection oriented routing - ARCHIVE NO UPDATES HERE