arch/powerpc/kernel/setup_32.c

   1 /*
   2  * Common prep/pmac/chrp boot and setup code.
   3  */
   4
   5 #include <linux/module.h>
   6 #include <linux/string.h>
   7 #include <linux/sched.h>
   8 #include <linux/init.h>
   9 #include <linux/kernel.h>
  10 #include <linux/reboot.h>
  11 #include <linux/delay.h>
  12 #include <linux/initrd.h>
  13 #include <linux/tty.h>
  14 #include <linux/bootmem.h>
  15 #include <linux/seq_file.h>
  16 #include <linux/root_dev.h>
  17 #include <linux/cpu.h>
  18 #include <linux/console.h>
  19 #include <linux/lmb.h>
  20
  21 #include <asm/io.h>
  22 #include <asm/prom.h>
  23 #include <asm/processor.h>
  24 #include <asm/pgtable.h>
  25 #include <asm/setup.h>
  26 #include <asm/smp.h>
  27 #include <asm/elf.h>
  28 #include <asm/cputable.h>
  29 #include <asm/bootx.h>
  30 #include <asm/btext.h>
  31 #include <asm/machdep.h>
  32 #include <asm/uaccess.h>
  33 #include <asm/system.h>
  34 #include <asm/pmac_feature.h>
  35 #include <asm/sections.h>
  36 #include <asm/nvram.h>
  37 #include <asm/xmon.h>
  38 #include <asm/time.h>
  39 #include <asm/serial.h>
  40 #include <asm/udbg.h>
  41 #include <asm/mmu_context.h>
  42 #include <asm/swiotlb.h>
  43
  44 #include "setup.h"
  45
  46 #define DBG(fmt...)
  47
  48 extern void bootx_init(unsigned long r4, unsigned long phys);
  49
  50 int boot_cpuid;
  51 EXPORT_SYMBOL_GPL(boot_cpuid);
  52 int boot_cpuid_phys;
  53
  54 int smp_hw_index[NR_CPUS];
  55
  56 unsigned long ISA_DMA_THRESHOLD;
  57 unsigned int DMA_MODE_READ;
  58 unsigned int DMA_MODE_WRITE;
  59
  60 #ifdef CONFIG_VGA_CONSOLE
  61 unsigned long vgacon_remap_base;
  62 EXPORT_SYMBOL(vgacon_remap_base);
  63 #endif
  64
  65 /*
  66  * These are used in binfmt_elf.c to put aux entries on the stack
  67  * for each elf executable being started.
  68  */
  69 int dcache_bsize;
  70 int icache_bsize;
  71 int ucache_bsize;
  72
  73 /*
  74  * We're called here very early in the boot.  We determine the machine
  75  * type and call the appropriate low-level setup functions.
  76  *  -- Cort <cort@fsmlabs.com>
  77  *
  78  * Note that the kernel may be running at an address which is different
  79  * from the address that it was linked at, so we must use RELOC/PTRRELOC
  80  * to access static data (including strings).  -- paulus
  81  */
  82 notrace unsigned long __init early_init(unsigned long dt_ptr)
  83 {
  84         unsigned long offset = reloc_offset();
  85         struct cpu_spec *spec;
  86
  87         /* First zero the BSS -- use memset_io, some platforms don't have
  88          * caches on yet */
  89         memset_io((void __iomem *)PTRRELOC(&__bss_start), 0,
  90                         __bss_stop - __bss_start);
  91
  92         /*
  93          * Identify the CPU type and fix up code sections
  94          * that depend on which cpu we have.
  95          */
  96         spec = identify_cpu(offset, mfspr(SPRN_PVR));
  97
  98         do_feature_fixups(spec->cpu_features,
  99                           PTRRELOC(&__start___ftr_fixup),
 100                           PTRRELOC(&__stop___ftr_fixup));
 101
 102         do_feature_fixups(spec->mmu_features,
 103                           PTRRELOC(&__start___mmu_ftr_fixup),
 104                           PTRRELOC(&__stop___mmu_ftr_fixup));
 105
 106         do_lwsync_fixups(spec->cpu_features,
 107                          PTRRELOC(&__start___lwsync_fixup),
 108                          PTRRELOC(&__stop___lwsync_fixup));
 109
 110         return KERNELBASE + offset;
 111 }
 112
 113
 114 /*
 115  * Find out what kind of machine we're on and save any data we need
 116  * from the early boot process (devtree is copied on pmac by prom_init()).
 117  * This is called very early on the boot process, after a minimal
 118  * MMU environment has been set up but before MMU_init is called.
 119  */
 120 notrace void __init machine_init(unsigned long dt_ptr)
 121 {
 122         lockdep_init();
 123
 124         /* Enable early debugging if any specified (see udbg.h) */
 125         udbg_early_init();
 126
 127         /* Do some early initialization based on the flat device tree */
 128         early_init_devtree(__va(dt_ptr));
 129
 130         probe_machine();
 131
 132         setup_kdump_trampoline();
 133
 134 #ifdef CONFIG_6xx
 135         if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
 136             cpu_has_feature(CPU_FTR_CAN_NAP))
 137                 ppc_md.power_save = ppc6xx_idle;
 138 #endif
 139
 140 #ifdef CONFIG_E500
 141         if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
 142             cpu_has_feature(CPU_FTR_CAN_NAP))
 143                 ppc_md.power_save = e500_idle;
 144 #endif
 145         if (ppc_md.progress)
 146                 ppc_md.progress("id mach(): done", 0x200);
 147 }
 148
 149 #ifdef CONFIG_BOOKE_WDT
 150 /* Checks wdt=x and wdt_period=xx command-line option */
 151 notrace int __init early_parse_wdt(char *p)
 152 {
 153         if (p && strncmp(p, "0", 1) != 0)
 154                booke_wdt_enabled = 1;
 155
 156         return 0;
 157 }
 158 early_param("wdt", early_parse_wdt);
 159
 160 int __init early_parse_wdt_period (char *p)
 161 {
 162         if (p)
 163                 booke_wdt_period = simple_strtoul(p, NULL, 0);
 164
 165         return 0;
 166 }
 167 early_param("wdt_period", early_parse_wdt_period);
 168 #endif  /* CONFIG_BOOKE_WDT */
 169
 170 /* Checks "l2cr=xxxx" command-line option */
 171 int __init ppc_setup_l2cr(char *str)
 172 {
 173         if (cpu_has_feature(CPU_FTR_L2CR)) {
 174                 unsigned long val = simple_strtoul(str, NULL, 0);
 175                 printk(KERN_INFO "l2cr set to %lx\n", val);
 176                 _set_L2CR(0);           /* force invalidate by disable cache */
 177                 _set_L2CR(val);         /* and enable it */
 178         }
 179         return 1;
 180 }
 181 __setup("l2cr=", ppc_setup_l2cr);
 182
 183 /* Checks "l3cr=xxxx" command-line option */
 184 int __init ppc_setup_l3cr(char *str)
 185 {
 186         if (cpu_has_feature(CPU_FTR_L3CR)) {
 187                 unsigned long val = simple_strtoul(str, NULL, 0);
 188                 printk(KERN_INFO "l3cr set to %lx\n", val);
 189                 _set_L3CR(val);         /* and enable it */
 190         }
 191         return 1;
 192 }
 193 __setup("l3cr=", ppc_setup_l3cr);
 194
 195 #ifdef CONFIG_GENERIC_NVRAM
 196
 197 /* Generic nvram hooks used by drivers/char/gen_nvram.c */
 198 unsigned char nvram_read_byte(int addr)
 199 {
 200         if (ppc_md.nvram_read_val)
 201                 return ppc_md.nvram_read_val(addr);
 202         return 0xff;
 203 }
 204 EXPORT_SYMBOL(nvram_read_byte);
 205
 206 void nvram_write_byte(unsigned char val, int addr)
 207 {
 208         if (ppc_md.nvram_write_val)
 209                 ppc_md.nvram_write_val(addr, val);
 210 }
 211 EXPORT_SYMBOL(nvram_write_byte);
 212
 213 void nvram_sync(void)
 214 {
 215         if (ppc_md.nvram_sync)
 216                 ppc_md.nvram_sync();
 217 }
 218 EXPORT_SYMBOL(nvram_sync);
 219
 220 #endif /* CONFIG_NVRAM */
 221
 222 int __init ppc_init(void)
 223 {
 224         /* clear the progress line */
 225         if (ppc_md.progress)
 226                 ppc_md.progress("             ", 0xffff);
 227
 228         /* call platform init */
 229         if (ppc_md.init != NULL) {
 230                 ppc_md.init();
 231         }
 232         return 0;
 233 }
 234
 235 arch_initcall(ppc_init);
 236
 237 #ifdef CONFIG_IRQSTACKS
 238 static void __init irqstack_early_init(void)
 239 {
 240         unsigned int i;
 241
 242         /* interrupt stacks must be in lowmem, we get that for free on ppc32
 243          * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
 244         for_each_possible_cpu(i) {
 245                 softirq_ctx[i] = (struct thread_info *)
 246                         __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
 247                 hardirq_ctx[i] = (struct thread_info *)
 248                         __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
 249         }
 250 }
 251 #else
 252 #define irqstack_early_init()
 253 #endif
 254
 255 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 256 static void __init exc_lvl_early_init(void)
 257 {
 258         unsigned int i;
 259
 260         /* interrupt stacks must be in lowmem, we get that for free on ppc32
 261          * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
 262         for_each_possible_cpu(i) {
 263                 critirq_ctx[i] = (struct thread_info *)
 264                         __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
 265 #ifdef CONFIG_BOOKE
 266                 dbgirq_ctx[i] = (struct thread_info *)
 267                         __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
 268                 mcheckirq_ctx[i] = (struct thread_info *)
 269                         __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
 270 #endif
 271         }
 272 }
 273 #else
 274 #define exc_lvl_early_init()
 275 #endif
 276
 277 /* Warning, IO base is not yet inited */
 278 void __init setup_arch(char **cmdline_p)
 279 {
 280         *cmdline_p = cmd_line;
 281
 282         /* so udelay does something sensible, assume <= 1000 bogomips */
 283         loops_per_jiffy = 500000000 / HZ;
 284
 285         unflatten_device_tree();
 286         check_for_initrd();
 287
 288         if (ppc_md.init_early)
 289                 ppc_md.init_early();
 290
 291         find_legacy_serial_ports();
 292
 293         smp_setup_cpu_maps();
 294
 295         /* Register early console */
 296         register_early_udbg_console();
 297
 298         xmon_setup();
 299
 300         /*
 301          * Set cache line size based on type of cpu as a default.
 302          * Systems with OF can look in the properties on the cpu node(s)
 303          * for a possibly more accurate value.
 304          */
 305         dcache_bsize = cur_cpu_spec->dcache_bsize;
 306         icache_bsize = cur_cpu_spec->icache_bsize;
 307         ucache_bsize = 0;
 308         if (cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE))
 309                 ucache_bsize = icache_bsize = dcache_bsize;
 310
 311         /* reboot on panic */
 312         panic_timeout = 180;
 313
 314         if (ppc_md.panic)
 315                 setup_panic();
 316
 317         init_mm.start_code = (unsigned long)_stext;
 318         init_mm.end_code = (unsigned long) _etext;
 319         init_mm.end_data = (unsigned long) _edata;
 320         init_mm.brk = klimit;
 321
 322         exc_lvl_early_init();
 323
 324         irqstack_early_init();
 325
 326         /* set up the bootmem stuff with available memory */
 327         do_init_bootmem();
 328         if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
 329
 330 #ifdef CONFIG_DUMMY_CONSOLE
 331         conswitchp = &dummy_con;
 332 #endif
 333
 334         if (ppc_md.setup_arch)
 335                 ppc_md.setup_arch();
 336         if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
 337
 338 #ifdef CONFIG_SWIOTLB
 339         if (ppc_swiotlb_enable)
 340                 swiotlb_init();
 341 #endif
 342
 343         paging_init();
 344
 345         /* Initialize the MMU context management stuff */
 346         mmu_context_init();
 347
 348 }