2 * Copyright (C) 2004 by Thomas Rathbone, HP Labs
3 * Copyright (C) 2005 by Ivan Kokshaysky
4 * Copyright (C) 2006 by SAN People
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the
18 * Free Software Foundation, Inc.,
19 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
26 * USB Device Port (UDP) registers.
27 * Based on AT91RM9200 datasheet revision E.
30 #define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */
31 #define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */
32 #define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */
33 #define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */
35 #define AT91_UDP_GLB_STAT 0x04 /* Global State Register */
36 #define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */
37 #define AT91_UDP_CONFG (1 << 1) /* Configured */
38 #define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */
39 #define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */
40 #define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */
42 #define AT91_UDP_FADDR 0x08 /* Function Address Register */
43 #define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */
44 #define AT91_UDP_FEN (1 << 8) /* Function Enable */
46 #define AT91_UDP_IER 0x10 /* Interrupt Enable Register */
47 #define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */
48 #define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */
50 #define AT91_UDP_ISR 0x1c /* Interrupt Status Register */
51 #define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
52 #define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
53 #define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
54 #define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */
55 #define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
56 #define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrupt Status */
57 #define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */
59 #define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */
60 #define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */
62 #define AT91_UDP_CSR(n) (0x30+((n)*4)) /* Endpoint Control/Status Registers 0-7 */
63 #define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */
64 #define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */
65 #define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */
66 #define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */
67 #define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */
68 #define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */
69 #define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */
70 #define AT91_UDP_DIR (1 << 7) /* Transfer Direction */
71 #define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */
72 #define AT91_UDP_EPTYPE_CTRL (0 << 8)
73 #define AT91_UDP_EPTYPE_ISO_OUT (1 << 8)
74 #define AT91_UDP_EPTYPE_BULK_OUT (2 << 8)
75 #define AT91_UDP_EPTYPE_INT_OUT (3 << 8)
76 #define AT91_UDP_EPTYPE_ISO_IN (5 << 8)
77 #define AT91_UDP_EPTYPE_BULK_IN (6 << 8)
78 #define AT91_UDP_EPTYPE_INT_IN (7 << 8)
79 #define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */
80 #define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */
81 #define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */
83 #define AT91_UDP_FDR(n) (0x50+((n)*4)) /* Endpoint FIFO Data Registers 0-7 */
85 #define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */
86 #define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */
87 #define AT91_UDP_TXVC_PUON (1 << 9) /* PullUp On [AT91SAM9260 only] */
89 /*-------------------------------------------------------------------------*/
92 * controller driver data structures
95 #define NUM_ENDPOINTS 6
98 * hardware won't disable bus reset, or resume while the controller
99 * is suspended ... watching suspend helps keep the logic symmetric.
101 #define MINIMUS_INTERRUPTUS \
102 (AT91_UDP_ENDBUSRES | AT91_UDP_RXRSM | AT91_UDP_RXSUSP)
106 struct list_head queue
;
107 struct at91_udc
*udc
;
110 unsigned maxpacket
:16;
112 unsigned is_pingpong
:1;
117 unsigned fifo_bank
:1;
119 const struct usb_endpoint_descriptor
124 * driver is non-SMP, and just blocks IRQs whenever it needs
125 * access protection for chip registers or driver state
128 struct usb_gadget gadget
;
129 struct at91_ep ep
[NUM_ENDPOINTS
];
130 struct usb_gadget_driver
*driver
;
134 unsigned suspended
:1;
135 unsigned req_pending
:1;
136 unsigned wait_for_addr_ack
:1;
137 unsigned wait_for_config_ack
:1;
138 unsigned selfpowered
:1;
139 unsigned active_suspend
:1;
141 struct at91_udc_data board
;
142 struct clk
*iclk
, *fclk
;
143 struct platform_device
*pdev
;
144 struct proc_dir_entry
*pde
;
145 void __iomem
*udp_baseaddr
;
149 static inline struct at91_udc
*to_udc(struct usb_gadget
*g
)
151 return container_of(g
, struct at91_udc
, gadget
);
154 struct at91_request
{
155 struct usb_request req
;
156 struct list_head queue
;
159 /*-------------------------------------------------------------------------*/
164 # define VDBG(stuff...) do{}while(0)
170 # define PACKET(stuff...) do{}while(0)
173 #define ERR(stuff...) pr_err("udc: " stuff)
174 #define WARNING(stuff...) pr_warning("udc: " stuff)
175 #define INFO(stuff...) pr_info("udc: " stuff)
176 #define DBG(stuff...) pr_debug("udc: " stuff)