?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
credit system, reverse_connid_table insert bugfix
[cor_2_6_31.git] / drivers / net / zorro8390.c
blob37c84e3b8be083426a89e1e68686dbb0ad569764
1 /*
2 * Amiga Linux/m68k and Linux/PPC Zorro NS8390 Ethernet Driver
3 *
4 * (C) Copyright 1998-2000 by some Elitist 680x0 Users(TM)
5 *
6 * ---------------------------------------------------------------------------
7 *
8 * This program is based on all the other NE2000 drivers for Linux
9 *
10 * ---------------------------------------------------------------------------
11 *
12 * This file is subject to the terms and conditions of the GNU General Public
13 * License. See the file COPYING in the main directory of the Linux
14 * distribution for more details.
15 *
16 * ---------------------------------------------------------------------------
17 *
18 * The Ariadne II and X-Surf are Zorro-II boards containing Realtek RTL8019AS
19 * Ethernet Controllers.
20 */
21
22 #include <linux/module.h>
23 #include <linux/kernel.h>
24 #include <linux/errno.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/netdevice.h>
28 #include <linux/etherdevice.h>
29 #include <linux/zorro.h>
30 #include <linux/jiffies.h>
31
32 #include <asm/system.h>
33 #include <asm/irq.h>
34 #include <asm/amigaints.h>
35 #include <asm/amigahw.h>
36
37 #define EI_SHIFT(x) (ei_local->reg_offset[x])
38 #define ei_inb(port) in_8(port)
39 #define ei_outb(val,port) out_8(port,val)
40 #define ei_inb_p(port) in_8(port)
41 #define ei_outb_p(val,port) out_8(port,val)
42
43 static const char version[] =
44 "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
45
46 #include "lib8390.c"
47
48 #define DRV_NAME "zorro8390"
49
50 #define NE_BASE (dev->base_addr)
51 #define NE_CMD (0x00*2)
52 #define NE_DATAPORT (0x10*2) /* NatSemi-defined port window offset. */
53 #define NE_RESET (0x1f*2) /* Issue a read to reset, a write to clear. */
54 #define NE_IO_EXTENT (0x20*2)
55
56 #define NE_EN0_ISR (0x07*2)
57 #define NE_EN0_DCFG (0x0e*2)
58
59 #define NE_EN0_RSARLO (0x08*2)
60 #define NE_EN0_RSARHI (0x09*2)
61 #define NE_EN0_RCNTLO (0x0a*2)
62 #define NE_EN0_RXCR (0x0c*2)
63 #define NE_EN0_TXCR (0x0d*2)
64 #define NE_EN0_RCNTHI (0x0b*2)
65 #define NE_EN0_IMR (0x0f*2)
66
67 #define NESM_START_PG 0x40 /* First page of TX buffer */
68 #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
69
70
71 #define WORDSWAP(a) ((((a)>>8)&0xff) | ((a)<<8))
72
73
74 static struct card_info {
75 zorro_id id;
76 const char *name;
77 unsigned int offset;
78 } cards[] __devinitdata = {
79 { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, "Ariadne II", 0x0600 },
80 { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, "X-Surf", 0x8600 },
81 };
82
83 static int __devinit zorro8390_init_one(struct zorro_dev *z,
84 const struct zorro_device_id *ent);
85 static int __devinit zorro8390_init(struct net_device *dev,
86 unsigned long board, const char *name,
87 unsigned long ioaddr);
88 static int zorro8390_open(struct net_device *dev);
89 static int zorro8390_close(struct net_device *dev);
90 static void zorro8390_reset_8390(struct net_device *dev);
91 static void zorro8390_get_8390_hdr(struct net_device *dev,
92 struct e8390_pkt_hdr *hdr, int ring_page);
93 static void zorro8390_block_input(struct net_device *dev, int count,
94 struct sk_buff *skb, int ring_offset);
95 static void zorro8390_block_output(struct net_device *dev, const int count,
96 const unsigned char *buf,
97 const int start_page);
98 static void __devexit zorro8390_remove_one(struct zorro_dev *z);
99
100 static struct zorro_device_id zorro8390_zorro_tbl[] __devinitdata = {
101 { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, },
102 { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, },
103 { 0 }
104 };
105
106 static struct zorro_driver zorro8390_driver = {
107 .name = "zorro8390",
108 .id_table = zorro8390_zorro_tbl,
109 .probe = zorro8390_init_one,
110 .remove = __devexit_p(zorro8390_remove_one),
111 };
112
113 static int __devinit zorro8390_init_one(struct zorro_dev *z,
114 const struct zorro_device_id *ent)
115 {
116 struct net_device *dev;
117 unsigned long board, ioaddr;
118 int err, i;
119
120 for (i = ARRAY_SIZE(cards)-1; i >= 0; i--)
121 if (z->id == cards[i].id)
122 break;
123 board = z->resource.start;
124 ioaddr = board+cards[i].offset;
125 dev = alloc_ei_netdev();
126 if (!dev)
127 return -ENOMEM;
128 if (!request_mem_region(ioaddr, NE_IO_EXTENT*2, DRV_NAME)) {
129 free_netdev(dev);
130 return -EBUSY;
131 }
132 if ((err = zorro8390_init(dev, board, cards[i].name,
133 ZTWO_VADDR(ioaddr)))) {
134 release_mem_region(ioaddr, NE_IO_EXTENT*2);
135 free_netdev(dev);
136 return err;
137 }
138 zorro_set_drvdata(z, dev);
139 return 0;
140 }
141
142 static const struct net_device_ops zorro8390_netdev_ops = {
143 .ndo_open = zorro8390_open,
144 .ndo_stop = zorro8390_close,
145 .ndo_start_xmit = ei_start_xmit,
146 .ndo_tx_timeout = ei_tx_timeout,
147 .ndo_get_stats = ei_get_stats,
148 .ndo_set_multicast_list = ei_set_multicast_list,
149 .ndo_validate_addr = eth_validate_addr,
150 .ndo_set_mac_address = eth_mac_addr,
151 .ndo_change_mtu = eth_change_mtu,
152 #ifdef CONFIG_NET_POLL_CONTROLLER
153 .ndo_poll_controller = ei_poll,
154 #endif
155 };
156
157 static int __devinit zorro8390_init(struct net_device *dev,
158 unsigned long board, const char *name,
159 unsigned long ioaddr)
160 {
161 int i;
162 int err;
163 unsigned char SA_prom[32];
164 int start_page, stop_page;
165 static u32 zorro8390_offsets[16] = {
166 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e,
167 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
168 };
169
170 /* Reset card. Who knows what dain-bramaged state it was left in. */
171 {
172 unsigned long reset_start_time = jiffies;
173
174 z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
175
176 while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
177 if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
178 printk(KERN_WARNING " not found (no reset ack).\n");
179 return -ENODEV;
180 }
181
182 z_writeb(0xff, ioaddr + NE_EN0_ISR); /* Ack all intr. */
183 }
184
185 /* Read the 16 bytes of station address PROM.
186 We must first initialize registers, similar to NS8390_init(eifdev, 0).
187 We can't reliably read the SAPROM address without this.
188 (I learned the hard way!). */
189 {
190 struct {
191 u32 value;
192 u32 offset;
193 } program_seq[] = {
194 {E8390_NODMA+E8390_PAGE0+E8390_STOP, NE_CMD}, /* Select page 0*/
195 {0x48, NE_EN0_DCFG}, /* Set byte-wide (0x48) access. */
196 {0x00, NE_EN0_RCNTLO}, /* Clear the count regs. */
197 {0x00, NE_EN0_RCNTHI},
198 {0x00, NE_EN0_IMR}, /* Mask completion irq. */
199 {0xFF, NE_EN0_ISR},
200 {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */
201 {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode. */
202 {32, NE_EN0_RCNTLO},
203 {0x00, NE_EN0_RCNTHI},
204 {0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000. */
205 {0x00, NE_EN0_RSARHI},
206 {E8390_RREAD+E8390_START, NE_CMD},
207 };
208 for (i = 0; i < ARRAY_SIZE(program_seq); i++) {
209 z_writeb(program_seq[i].value, ioaddr + program_seq[i].offset);
210 }
211 }
212 for (i = 0; i < 16; i++) {
213 SA_prom[i] = z_readb(ioaddr + NE_DATAPORT);
214 (void)z_readb(ioaddr + NE_DATAPORT);
215 }
216
217 /* We must set the 8390 for word mode. */
218 z_writeb(0x49, ioaddr + NE_EN0_DCFG);
219 start_page = NESM_START_PG;
220 stop_page = NESM_STOP_PG;
221
222 dev->base_addr = ioaddr;
223 dev->irq = IRQ_AMIGA_PORTS;
224
225 /* Install the Interrupt handler */
226 i = request_irq(IRQ_AMIGA_PORTS, __ei_interrupt, IRQF_SHARED, DRV_NAME, dev);
227 if (i) return i;
228
229 for(i = 0; i < ETHER_ADDR_LEN; i++)
230 dev->dev_addr[i] = SA_prom[i];
231
232 #ifdef DEBUG
233 printk("%pM", dev->dev_addr);
234 #endif
235
236 ei_status.name = name;
237 ei_status.tx_start_page = start_page;
238 ei_status.stop_page = stop_page;
239 ei_status.word16 = 1;
240
241 ei_status.rx_start_page = start_page + TX_PAGES;
242
243 ei_status.reset_8390 = &zorro8390_reset_8390;
244 ei_status.block_input = &zorro8390_block_input;
245 ei_status.block_output = &zorro8390_block_output;
246 ei_status.get_8390_hdr = &zorro8390_get_8390_hdr;
247 ei_status.reg_offset = zorro8390_offsets;
248
249 dev->netdev_ops = &zorro8390_netdev_ops;
250 __NS8390_init(dev, 0);
251 err = register_netdev(dev);
252 if (err) {
253 free_irq(IRQ_AMIGA_PORTS, dev);
254 return err;
255 }
256
257 printk(KERN_INFO "%s: %s at 0x%08lx, Ethernet Address %pM\n",
258 dev->name, name, board, dev->dev_addr);
259
260 return 0;
261 }
262
263 static int zorro8390_open(struct net_device *dev)
264 {
265 __ei_open(dev);
266 return 0;
267 }
268
269 static int zorro8390_close(struct net_device *dev)
270 {
271 if (ei_debug > 1)
272 printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name);
273 __ei_close(dev);
274 return 0;
275 }
276
277 /* Hard reset the card. This used to pause for the same period that a
278 8390 reset command required, but that shouldn't be necessary. */
279 static void zorro8390_reset_8390(struct net_device *dev)
280 {
281 unsigned long reset_start_time = jiffies;
282
283 if (ei_debug > 1)
284 printk(KERN_DEBUG "resetting the 8390 t=%ld...\n", jiffies);
285
286 z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
287
288 ei_status.txing = 0;
289 ei_status.dmaing = 0;
290
291 /* This check _should_not_ be necessary, omit eventually. */
292 while ((z_readb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
293 if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
294 printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n",
295 dev->name);
296 break;
297 }
298 z_writeb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr. */
299 }
300
301 /* Grab the 8390 specific header. Similar to the block_input routine, but
302 we don't need to be concerned with ring wrap as the header will be at
303 the start of a page, so we optimize accordingly. */
304
305 static void zorro8390_get_8390_hdr(struct net_device *dev,
306 struct e8390_pkt_hdr *hdr, int ring_page)
307 {
308 int nic_base = dev->base_addr;
309 int cnt;
310 short *ptrs;
311
312 /* This *shouldn't* happen. If it does, it's the last thing you'll see */
313 if (ei_status.dmaing) {
314 printk(KERN_ERR "%s: DMAing conflict in ne_get_8390_hdr "
315 "[DMAstat:%d][irqlock:%d].\n", dev->name, ei_status.dmaing,
316 ei_status.irqlock);
317 return;
318 }
319
320 ei_status.dmaing |= 0x01;
321 z_writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
322 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
323 z_writeb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO);
324 z_writeb(0, nic_base + NE_EN0_RCNTHI);
325 z_writeb(0, nic_base + NE_EN0_RSARLO); /* On page boundary */
326 z_writeb(ring_page, nic_base + NE_EN0_RSARHI);
327 z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
328
329 ptrs = (short*)hdr;
330 for (cnt = 0; cnt < (sizeof(struct e8390_pkt_hdr)>>1); cnt++)
331 *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
332
333 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
334
335 hdr->count = WORDSWAP(hdr->count);
336
337 ei_status.dmaing &= ~0x01;
338 }
339
340 /* Block input and output, similar to the Crynwr packet driver. If you
341 are porting to a new ethercard, look at the packet driver source for hints.
342 The NEx000 doesn't share the on-board packet memory -- you have to put
343 the packet out through the "remote DMA" dataport using z_writeb. */
344
345 static void zorro8390_block_input(struct net_device *dev, int count,
346 struct sk_buff *skb, int ring_offset)
347 {
348 int nic_base = dev->base_addr;
349 char *buf = skb->data;
350 short *ptrs;
351 int cnt;
352
353 /* This *shouldn't* happen. If it does, it's the last thing you'll see */
354 if (ei_status.dmaing) {
355 printk(KERN_ERR "%s: DMAing conflict in ne_block_input "
356 "[DMAstat:%d][irqlock:%d].\n",
357 dev->name, ei_status.dmaing, ei_status.irqlock);
358 return;
359 }
360 ei_status.dmaing |= 0x01;
361 z_writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
362 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
363 z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
364 z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
365 z_writeb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO);
366 z_writeb(ring_offset >> 8, nic_base + NE_EN0_RSARHI);
367 z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
368 ptrs = (short*)buf;
369 for (cnt = 0; cnt < (count>>1); cnt++)
370 *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
371 if (count & 0x01)
372 buf[count-1] = z_readb(NE_BASE + NE_DATAPORT);
373
374 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
375 ei_status.dmaing &= ~0x01;
376 }
377
378 static void zorro8390_block_output(struct net_device *dev, int count,
379 const unsigned char *buf,
380 const int start_page)
381 {
382 int nic_base = NE_BASE;
383 unsigned long dma_start;
384 short *ptrs;
385 int cnt;
386
387 /* Round the count up for word writes. Do we need to do this?
388 What effect will an odd byte count have on the 8390?
389 I should check someday. */
390 if (count & 0x01)
391 count++;
392
393 /* This *shouldn't* happen. If it does, it's the last thing you'll see */
394 if (ei_status.dmaing) {
395 printk(KERN_ERR "%s: DMAing conflict in ne_block_output."
396 "[DMAstat:%d][irqlock:%d]\n", dev->name, ei_status.dmaing,
397 ei_status.irqlock);
398 return;
399 }
400 ei_status.dmaing |= 0x01;
401 /* We should already be in page 0, but to be safe... */
402 z_writeb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
403
404 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
405
406 /* Now the normal output. */
407 z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
408 z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
409 z_writeb(0x00, nic_base + NE_EN0_RSARLO);
410 z_writeb(start_page, nic_base + NE_EN0_RSARHI);
411
412 z_writeb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
413 ptrs = (short*)buf;
414 for (cnt = 0; cnt < count>>1; cnt++)
415 z_writew(*ptrs++, NE_BASE+NE_DATAPORT);
416
417 dma_start = jiffies;
418
419 while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
420 if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
421 printk(KERN_ERR "%s: timeout waiting for Tx RDC.\n",
422 dev->name);
423 zorro8390_reset_8390(dev);
424 __NS8390_init(dev,1);
425 break;
426 }
427
428 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
429 ei_status.dmaing &= ~0x01;
430 return;
431 }
432
433 static void __devexit zorro8390_remove_one(struct zorro_dev *z)
434 {
435 struct net_device *dev = zorro_get_drvdata(z);
436
437 unregister_netdev(dev);
438 free_irq(IRQ_AMIGA_PORTS, dev);
439 release_mem_region(ZTWO_PADDR(dev->base_addr), NE_IO_EXTENT*2);
440 free_netdev(dev);
441 }
442
443 static int __init zorro8390_init_module(void)
444 {
445 return zorro_register_driver(&zorro8390_driver);
446 }
447
448 static void __exit zorro8390_cleanup_module(void)
449 {
450 zorro_unregister_driver(&zorro8390_driver);
451 }
452
453 module_init(zorro8390_init_module);
454 module_exit(zorro8390_cleanup_module);
455
456 MODULE_LICENSE("GPL");
connection oriented routing - ARCHIVE NO UPDATES HERE