printk removal, receive reordering bugfix

[cor_2_6_31.git] / include / linux / ethtool.h

/*
 * ethtool.h: Defines for Linux ethtool.
 *
 * Copyright (C) 1998 David S. Miller (davem@redhat.com)
 * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
 * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
 * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
 *                                christopher.leech@intel.com,
 *                                scott.feldman@intel.com)
 * Portions Copyright (C) Sun Microsystems 2008
 */

#ifndef _LINUX_ETHTOOL_H
#define _LINUX_ETHTOOL_H

#include <linux/types.h>

/* This should work for both 32 and 64 bit userland. */
struct ethtool_cmd {
        __u32   cmd;
        __u32   supported;      /* Features this interface supports */
        __u32   advertising;    /* Features this interface advertises */
        __u16   speed;          /* The forced speed, 10Mb, 100Mb, gigabit */
        __u8    duplex;         /* Duplex, half or full */
        __u8    port;           /* Which connector port */
        __u8    phy_address;
        __u8    transceiver;    /* Which transceiver to use */
        __u8    autoneg;        /* Enable or disable autonegotiation */
        __u8    mdio_support;
        __u32   maxtxpkt;       /* Tx pkts before generating tx int */
        __u32   maxrxpkt;       /* Rx pkts before generating rx int */
        __u16   speed_hi;
        __u8    eth_tp_mdix;
        __u8    reserved2;
        __u32   lp_advertising; /* Features the link partner advertises */
        __u32   reserved[2];
};

static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
                                                __u32 speed)
{

        ep->speed = (__u16)speed;
        ep->speed_hi = (__u16)(speed >> 16);
}

static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
{
        return (ep->speed_hi << 16) | ep->speed;
}

#define ETHTOOL_BUSINFO_LEN     32
/* these strings are set to whatever the driver author decides... */
struct ethtool_drvinfo {
        __u32   cmd;
        char    driver[32];     /* driver short name, "tulip", "eepro100" */
        char    version[32];    /* driver version string */
        char    fw_version[32]; /* firmware version string, if applicable */
        char    bus_info[ETHTOOL_BUSINFO_LEN];  /* Bus info for this IF. */
                                /* For PCI devices, use pci_name(pci_dev). */
        char    reserved1[32];
        char    reserved2[12];
        __u32   n_priv_flags;   /* number of flags valid in ETHTOOL_GPFLAGS */
        __u32   n_stats;        /* number of u64's from ETHTOOL_GSTATS */
        __u32   testinfo_len;
        __u32   eedump_len;     /* Size of data from ETHTOOL_GEEPROM (bytes) */
        __u32   regdump_len;    /* Size of data from ETHTOOL_GREGS (bytes) */
};

#define SOPASS_MAX      6
/* wake-on-lan settings */
struct ethtool_wolinfo {
        __u32   cmd;
        __u32   supported;
        __u32   wolopts;
        __u8    sopass[SOPASS_MAX]; /* SecureOn(tm) password */
};

/* for passing single values */
struct ethtool_value {
        __u32   cmd;
        __u32   data;
};

/* for passing big chunks of data */
struct ethtool_regs {
        __u32   cmd;
        __u32   version; /* driver-specific, indicates different chips/revs */
        __u32   len; /* bytes */
        __u8    data[0];
};

/* for passing EEPROM chunks */
struct ethtool_eeprom {
        __u32   cmd;
        __u32   magic;
        __u32   offset; /* in bytes */
        __u32   len; /* in bytes */
        __u8    data[0];
};

/* for configuring coalescing parameters of chip */
struct ethtool_coalesce {
        __u32   cmd;    /* ETHTOOL_{G,S}COALESCE */

        /* How many usecs to delay an RX interrupt after
         * a packet arrives.  If 0, only rx_max_coalesced_frames
         * is used.
         */
        __u32   rx_coalesce_usecs;

        /* How many packets to delay an RX interrupt after
         * a packet arrives.  If 0, only rx_coalesce_usecs is
         * used.  It is illegal to set both usecs and max frames
         * to zero as this would cause RX interrupts to never be
         * generated.
         */
        __u32   rx_max_coalesced_frames;

        /* Same as above two parameters, except that these values
         * apply while an IRQ is being serviced by the host.  Not
         * all cards support this feature and the values are ignored
         * in that case.
         */
        __u32   rx_coalesce_usecs_irq;
        __u32   rx_max_coalesced_frames_irq;

        /* How many usecs to delay a TX interrupt after
         * a packet is sent.  If 0, only tx_max_coalesced_frames
         * is used.
         */
        __u32   tx_coalesce_usecs;

        /* How many packets to delay a TX interrupt after
         * a packet is sent.  If 0, only tx_coalesce_usecs is
         * used.  It is illegal to set both usecs and max frames
         * to zero as this would cause TX interrupts to never be
         * generated.
         */
        __u32   tx_max_coalesced_frames;

        /* Same as above two parameters, except that these values
         * apply while an IRQ is being serviced by the host.  Not
         * all cards support this feature and the values are ignored
         * in that case.
         */
        __u32   tx_coalesce_usecs_irq;
        __u32   tx_max_coalesced_frames_irq;

        /* How many usecs to delay in-memory statistics
         * block updates.  Some drivers do not have an in-memory
         * statistic block, and in such cases this value is ignored.
         * This value must not be zero.
         */
        __u32   stats_block_coalesce_usecs;

        /* Adaptive RX/TX coalescing is an algorithm implemented by
         * some drivers to improve latency under low packet rates and
         * improve throughput under high packet rates.  Some drivers
         * only implement one of RX or TX adaptive coalescing.  Anything
         * not implemented by the driver causes these values to be
         * silently ignored.
         */
        __u32   use_adaptive_rx_coalesce;
        __u32   use_adaptive_tx_coalesce;

        /* When the packet rate (measured in packets per second)
         * is below pkt_rate_low, the {rx,tx}_*_low parameters are
         * used.
         */
        __u32   pkt_rate_low;
        __u32   rx_coalesce_usecs_low;
        __u32   rx_max_coalesced_frames_low;
        __u32   tx_coalesce_usecs_low;
        __u32   tx_max_coalesced_frames_low;

        /* When the packet rate is below pkt_rate_high but above
         * pkt_rate_low (both measured in packets per second) the
         * normal {rx,tx}_* coalescing parameters are used.
         */

        /* When the packet rate is (measured in packets per second)
         * is above pkt_rate_high, the {rx,tx}_*_high parameters are
         * used.
         */
        __u32   pkt_rate_high;
        __u32   rx_coalesce_usecs_high;
        __u32   rx_max_coalesced_frames_high;
        __u32   tx_coalesce_usecs_high;
        __u32   tx_max_coalesced_frames_high;

        /* How often to do adaptive coalescing packet rate sampling,
         * measured in seconds.  Must not be zero.
         */
        __u32   rate_sample_interval;
};

/* for configuring RX/TX ring parameters */
struct ethtool_ringparam {
        __u32   cmd;    /* ETHTOOL_{G,S}RINGPARAM */

        /* Read only attributes.  These indicate the maximum number
         * of pending RX/TX ring entries the driver will allow the
         * user to set.
         */
        __u32   rx_max_pending;
        __u32   rx_mini_max_pending;
        __u32   rx_jumbo_max_pending;
        __u32   tx_max_pending;

        /* Values changeable by the user.  The valid values are
         * in the range 1 to the "*_max_pending" counterpart above.
         */
        __u32   rx_pending;
        __u32   rx_mini_pending;
        __u32   rx_jumbo_pending;
        __u32   tx_pending;
};

/* for configuring link flow control parameters */
struct ethtool_pauseparam {
        __u32   cmd;    /* ETHTOOL_{G,S}PAUSEPARAM */

        /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
         * being true) the user may set 'autonet' here non-zero to have the
         * pause parameters be auto-negotiated too.  In such a case, the
         * {rx,tx}_pause values below determine what capabilities are
         * advertised.
         *
         * If 'autoneg' is zero or the link is not being auto-negotiated,
         * then {rx,tx}_pause force the driver to use/not-use pause
         * flow control.
         */
        __u32   autoneg;
        __u32   rx_pause;
        __u32   tx_pause;
};

#define ETH_GSTRING_LEN         32
enum ethtool_stringset {
        ETH_SS_TEST             = 0,
        ETH_SS_STATS,
        ETH_SS_PRIV_FLAGS,
};

/* for passing string sets for data tagging */
struct ethtool_gstrings {
        __u32   cmd;            /* ETHTOOL_GSTRINGS */
        __u32   string_set;     /* string set id e.c. ETH_SS_TEST, etc*/
        __u32   len;            /* number of strings in the string set */
        __u8    data[0];
};

enum ethtool_test_flags {
        ETH_TEST_FL_OFFLINE     = (1 << 0),     /* online / offline */
        ETH_TEST_FL_FAILED      = (1 << 1),     /* test passed / failed */
};

/* for requesting NIC test and getting results*/
struct ethtool_test {
        __u32   cmd;            /* ETHTOOL_TEST */
        __u32   flags;          /* ETH_TEST_FL_xxx */
        __u32   reserved;
        __u32   len;            /* result length, in number of u64 elements */
        __u64   data[0];
};

/* for dumping NIC-specific statistics */
struct ethtool_stats {
        __u32   cmd;            /* ETHTOOL_GSTATS */
        __u32   n_stats;        /* number of u64's being returned */
        __u64   data[0];
};

struct ethtool_perm_addr {
        __u32   cmd;            /* ETHTOOL_GPERMADDR */
        __u32   size;
        __u8    data[0];
};

/* boolean flags controlling per-interface behavior characteristics.
 * When reading, the flag indicates whether or not a certain behavior
 * is enabled/present.  When writing, the flag indicates whether
 * or not the driver should turn on (set) or off (clear) a behavior.
 *
 * Some behaviors may read-only (unconditionally absent or present).
 * If such is the case, return EINVAL in the set-flags operation if the
 * flag differs from the read-only value.
 */
enum ethtool_flags {
        ETH_FLAG_LRO            = (1 << 15),    /* LRO is enabled */
};

/* The following structures are for supporting RX network flow
 * classification configuration. Note, all multibyte fields, e.g.,
 * ip4src, ip4dst, psrc, pdst, spi, etc. are expected to be in network
 * byte order.
 */
struct ethtool_tcpip4_spec {
        __be32  ip4src;
        __be32  ip4dst;
        __be16  psrc;
        __be16  pdst;
        __u8    tos;
};

struct ethtool_ah_espip4_spec {
        __be32  ip4src;
        __be32  ip4dst;
        __be32  spi;
        __u8    tos;
};

struct ethtool_rawip4_spec {
        __be32  ip4src;
        __be32  ip4dst;
        __u8    hdata[64];
};

struct ethtool_ether_spec {
        __be16  ether_type;
        __u8    frame_size;
        __u8    eframe[16];
};

#define ETH_RX_NFC_IP4  1
#define ETH_RX_NFC_IP6  2

struct ethtool_usrip4_spec {
        __be32  ip4src;
        __be32  ip4dst;
        __be32  l4_4_bytes;
        __u8    tos;
        __u8    ip_ver;
        __u8    proto;
};

struct ethtool_rx_flow_spec {
        __u32           flow_type;
        union {
                struct ethtool_tcpip4_spec              tcp_ip4_spec;
                struct ethtool_tcpip4_spec              udp_ip4_spec;
                struct ethtool_tcpip4_spec              sctp_ip4_spec;
                struct ethtool_ah_espip4_spec           ah_ip4_spec;
                struct ethtool_ah_espip4_spec           esp_ip4_spec;
                struct ethtool_rawip4_spec              raw_ip4_spec;
                struct ethtool_ether_spec               ether_spec;
                struct ethtool_usrip4_spec              usr_ip4_spec;
                __u8                                    hdata[64];
        } h_u, m_u; /* entry, mask */
        __u64           ring_cookie;
        __u32           location;
};

struct ethtool_rxnfc {
        __u32                           cmd;
        __u32                           flow_type;
        /* The rx flow hash value or the rule DB size */
        __u64                           data;
        struct ethtool_rx_flow_spec     fs;
        __u32                           rule_cnt;
        __u32                           rule_locs[0];
};

#ifdef __KERNEL__

struct net_device;

/* Some generic methods drivers may use in their ethtool_ops */
u32 ethtool_op_get_link(struct net_device *dev);
u32 ethtool_op_get_tx_csum(struct net_device *dev);
int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data);
int ethtool_op_set_tx_ipv6_csum(struct net_device *dev, u32 data);
u32 ethtool_op_get_sg(struct net_device *dev);
int ethtool_op_set_sg(struct net_device *dev, u32 data);
u32 ethtool_op_get_tso(struct net_device *dev);
int ethtool_op_set_tso(struct net_device *dev, u32 data);
u32 ethtool_op_get_ufo(struct net_device *dev);
int ethtool_op_set_ufo(struct net_device *dev, u32 data);
u32 ethtool_op_get_flags(struct net_device *dev);
int ethtool_op_set_flags(struct net_device *dev, u32 data);

/**
 * &ethtool_ops - Alter and report network device settings
 * get_settings: Get device-specific settings
 * set_settings: Set device-specific settings
 * get_drvinfo: Report driver information
 * get_regs: Get device registers
 * get_wol: Report whether Wake-on-Lan is enabled
 * set_wol: Turn Wake-on-Lan on or off
 * get_msglevel: Report driver message level
 * set_msglevel: Set driver message level
 * nway_reset: Restart autonegotiation
 * get_link: Get link status
 * get_eeprom: Read data from the device EEPROM
 * set_eeprom: Write data to the device EEPROM
 * get_coalesce: Get interrupt coalescing parameters
 * set_coalesce: Set interrupt coalescing parameters
 * get_ringparam: Report ring sizes
 * set_ringparam: Set ring sizes
 * get_pauseparam: Report pause parameters
 * set_pauseparam: Set pause parameters
 * get_rx_csum: Report whether receive checksums are turned on or off
 * set_rx_csum: Turn receive checksum on or off
 * get_tx_csum: Report whether transmit checksums are turned on or off
 * set_tx_csum: Turn transmit checksums on or off
 * get_sg: Report whether scatter-gather is enabled
 * set_sg: Turn scatter-gather on or off
 * get_tso: Report whether TCP segmentation offload is enabled
 * set_tso: Turn TCP segmentation offload on or off
 * get_ufo: Report whether UDP fragmentation offload is enabled
 * set_ufo: Turn UDP fragmentation offload on or off
 * self_test: Run specified self-tests
 * get_strings: Return a set of strings that describe the requested objects 
 * phys_id: Identify the device
 * get_stats: Return statistics about the device
 * get_flags: get 32-bit flags bitmap
 * set_flags: set 32-bit flags bitmap
 * 
 * Description:
 *
 * get_settings:
 *      @get_settings is passed an &ethtool_cmd to fill in.  It returns
 *      an negative errno or zero.
 *
 * set_settings:
 *      @set_settings is passed an &ethtool_cmd and should attempt to set
 *      all the settings this device supports.  It may return an error value
 *      if something goes wrong (otherwise 0).
 *
 * get_eeprom:
 *      Should fill in the magic field.  Don't need to check len for zero
 *      or wraparound.  Fill in the data argument with the eeprom values
 *      from offset to offset + len.  Update len to the amount read.
 *      Returns an error or zero.
 *
 * set_eeprom:
 *      Should validate the magic field.  Don't need to check len for zero
 *      or wraparound.  Update len to the amount written.  Returns an error
 *      or zero.
 */
struct ethtool_ops {
        int     (*get_settings)(struct net_device *, struct ethtool_cmd *);
        int     (*set_settings)(struct net_device *, struct ethtool_cmd *);
        void    (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
        int     (*get_regs_len)(struct net_device *);
        void    (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
        void    (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
        int     (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
        u32     (*get_msglevel)(struct net_device *);
        void    (*set_msglevel)(struct net_device *, u32);
        int     (*nway_reset)(struct net_device *);
        u32     (*get_link)(struct net_device *);
        int     (*get_eeprom_len)(struct net_device *);
        int     (*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
        int     (*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
        int     (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
        int     (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
        void    (*get_ringparam)(struct net_device *, struct ethtool_ringparam *);
        int     (*set_ringparam)(struct net_device *, struct ethtool_ringparam *);
        void    (*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
        int     (*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
        u32     (*get_rx_csum)(struct net_device *);
        int     (*set_rx_csum)(struct net_device *, u32);
        u32     (*get_tx_csum)(struct net_device *);
        int     (*set_tx_csum)(struct net_device *, u32);
        u32     (*get_sg)(struct net_device *);
        int     (*set_sg)(struct net_device *, u32);
        u32     (*get_tso)(struct net_device *);
        int     (*set_tso)(struct net_device *, u32);
        void    (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
        void    (*get_strings)(struct net_device *, u32 stringset, u8 *);
        int     (*phys_id)(struct net_device *, u32);
        void    (*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *);
        int     (*begin)(struct net_device *);
        void    (*complete)(struct net_device *);
        u32     (*get_ufo)(struct net_device *);
        int     (*set_ufo)(struct net_device *, u32);
        u32     (*get_flags)(struct net_device *);
        int     (*set_flags)(struct net_device *, u32);
        u32     (*get_priv_flags)(struct net_device *);
        int     (*set_priv_flags)(struct net_device *, u32);
        int     (*get_sset_count)(struct net_device *, int);

        /* the following hooks are obsolete */
        int     (*self_test_count)(struct net_device *);/* use get_sset_count */
        int     (*get_stats_count)(struct net_device *);/* use get_sset_count */
        int     (*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *);
        int     (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
};
#endif /* __KERNEL__ */

/* CMDs currently supported */
#define ETHTOOL_GSET            0x00000001 /* Get settings. */
#define ETHTOOL_SSET            0x00000002 /* Set settings. */
#define ETHTOOL_GDRVINFO        0x00000003 /* Get driver info. */
#define ETHTOOL_GREGS           0x00000004 /* Get NIC registers. */
#define ETHTOOL_GWOL            0x00000005 /* Get wake-on-lan options. */
#define ETHTOOL_SWOL            0x00000006 /* Set wake-on-lan options. */
#define ETHTOOL_GMSGLVL         0x00000007 /* Get driver message level */
#define ETHTOOL_SMSGLVL         0x00000008 /* Set driver msg level. */
#define ETHTOOL_NWAY_RST        0x00000009 /* Restart autonegotiation. */
#define ETHTOOL_GLINK           0x0000000a /* Get link status (ethtool_value) */
#define ETHTOOL_GEEPROM         0x0000000b /* Get EEPROM data */
#define ETHTOOL_SEEPROM         0x0000000c /* Set EEPROM data. */
#define ETHTOOL_GCOALESCE       0x0000000e /* Get coalesce config */
#define ETHTOOL_SCOALESCE       0x0000000f /* Set coalesce config. */
#define ETHTOOL_GRINGPARAM      0x00000010 /* Get ring parameters */
#define ETHTOOL_SRINGPARAM      0x00000011 /* Set ring parameters. */
#define ETHTOOL_GPAUSEPARAM     0x00000012 /* Get pause parameters */
#define ETHTOOL_SPAUSEPARAM     0x00000013 /* Set pause parameters. */
#define ETHTOOL_GRXCSUM         0x00000014 /* Get RX hw csum enable (ethtool_value) */
#define ETHTOOL_SRXCSUM         0x00000015 /* Set RX hw csum enable (ethtool_value) */
#define ETHTOOL_GTXCSUM         0x00000016 /* Get TX hw csum enable (ethtool_value) */
#define ETHTOOL_STXCSUM         0x00000017 /* Set TX hw csum enable (ethtool_value) */
#define ETHTOOL_GSG             0x00000018 /* Get scatter-gather enable
                                            * (ethtool_value) */
#define ETHTOOL_SSG             0x00000019 /* Set scatter-gather enable
                                            * (ethtool_value). */
#define ETHTOOL_TEST            0x0000001a /* execute NIC self-test. */
#define ETHTOOL_GSTRINGS        0x0000001b /* get specified string set */
#define ETHTOOL_PHYS_ID         0x0000001c /* identify the NIC */
#define ETHTOOL_GSTATS          0x0000001d /* get NIC-specific statistics */
#define ETHTOOL_GTSO            0x0000001e /* Get TSO enable (ethtool_value) */
#define ETHTOOL_STSO            0x0000001f /* Set TSO enable (ethtool_value) */
#define ETHTOOL_GPERMADDR       0x00000020 /* Get permanent hardware address */
#define ETHTOOL_GUFO            0x00000021 /* Get UFO enable (ethtool_value) */
#define ETHTOOL_SUFO            0x00000022 /* Set UFO enable (ethtool_value) */
#define ETHTOOL_GGSO            0x00000023 /* Get GSO enable (ethtool_value) */
#define ETHTOOL_SGSO            0x00000024 /* Set GSO enable (ethtool_value) */
#define ETHTOOL_GFLAGS          0x00000025 /* Get flags bitmap(ethtool_value) */
#define ETHTOOL_SFLAGS          0x00000026 /* Set flags bitmap(ethtool_value) */
#define ETHTOOL_GPFLAGS         0x00000027 /* Get driver-private flags bitmap */
#define ETHTOOL_SPFLAGS         0x00000028 /* Set driver-private flags bitmap */

#define ETHTOOL_GRXFH           0x00000029 /* Get RX flow hash configuration */
#define ETHTOOL_SRXFH           0x0000002a /* Set RX flow hash configuration */
#define ETHTOOL_GGRO            0x0000002b /* Get GRO enable (ethtool_value) */
#define ETHTOOL_SGRO            0x0000002c /* Set GRO enable (ethtool_value) */
#define ETHTOOL_GRXRINGS        0x0000002d /* Get RX rings available for LB */
#define ETHTOOL_GRXCLSRLCNT     0x0000002e /* Get RX class rule count */
#define ETHTOOL_GRXCLSRULE      0x0000002f /* Get RX classification rule */
#define ETHTOOL_GRXCLSRLALL     0x00000030 /* Get all RX classification rule */
#define ETHTOOL_SRXCLSRLDEL     0x00000031 /* Delete RX classification rule */
#define ETHTOOL_SRXCLSRLINS     0x00000032 /* Insert RX classification rule */

/* compatibility with older code */
#define SPARC_ETH_GSET          ETHTOOL_GSET
#define SPARC_ETH_SSET          ETHTOOL_SSET

/* Indicates what features are supported by the interface. */
#define SUPPORTED_10baseT_Half          (1 << 0)
#define SUPPORTED_10baseT_Full          (1 << 1)
#define SUPPORTED_100baseT_Half         (1 << 2)
#define SUPPORTED_100baseT_Full         (1 << 3)
#define SUPPORTED_1000baseT_Half        (1 << 4)
#define SUPPORTED_1000baseT_Full        (1 << 5)
#define SUPPORTED_Autoneg               (1 << 6)
#define SUPPORTED_TP                    (1 << 7)
#define SUPPORTED_AUI                   (1 << 8)
#define SUPPORTED_MII                   (1 << 9)
#define SUPPORTED_FIBRE                 (1 << 10)
#define SUPPORTED_BNC                   (1 << 11)
#define SUPPORTED_10000baseT_Full       (1 << 12)
#define SUPPORTED_Pause                 (1 << 13)
#define SUPPORTED_Asym_Pause            (1 << 14)
#define SUPPORTED_2500baseX_Full        (1 << 15)
#define SUPPORTED_Backplane             (1 << 16)
#define SUPPORTED_1000baseKX_Full       (1 << 17)
#define SUPPORTED_10000baseKX4_Full     (1 << 18)
#define SUPPORTED_10000baseKR_Full      (1 << 19)
#define SUPPORTED_10000baseR_FEC        (1 << 20)

/* Indicates what features are advertised by the interface. */
#define ADVERTISED_10baseT_Half         (1 << 0)
#define ADVERTISED_10baseT_Full         (1 << 1)
#define ADVERTISED_100baseT_Half        (1 << 2)
#define ADVERTISED_100baseT_Full        (1 << 3)
#define ADVERTISED_1000baseT_Half       (1 << 4)
#define ADVERTISED_1000baseT_Full       (1 << 5)
#define ADVERTISED_Autoneg              (1 << 6)
#define ADVERTISED_TP                   (1 << 7)
#define ADVERTISED_AUI                  (1 << 8)
#define ADVERTISED_MII                  (1 << 9)
#define ADVERTISED_FIBRE                (1 << 10)
#define ADVERTISED_BNC                  (1 << 11)
#define ADVERTISED_10000baseT_Full      (1 << 12)
#define ADVERTISED_Pause                (1 << 13)
#define ADVERTISED_Asym_Pause           (1 << 14)
#define ADVERTISED_2500baseX_Full       (1 << 15)
#define ADVERTISED_Backplane            (1 << 16)
#define ADVERTISED_1000baseKX_Full      (1 << 17)
#define ADVERTISED_10000baseKX4_Full    (1 << 18)
#define ADVERTISED_10000baseKR_Full     (1 << 19)
#define ADVERTISED_10000baseR_FEC       (1 << 20)

/* The following are all involved in forcing a particular link
 * mode for the device for setting things.  When getting the
 * devices settings, these indicate the current mode and whether
 * it was foced up into this mode or autonegotiated.
 */

/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
#define SPEED_10                10
#define SPEED_100               100
#define SPEED_1000              1000
#define SPEED_2500              2500
#define SPEED_10000             10000

/* Duplex, half or full. */
#define DUPLEX_HALF             0x00
#define DUPLEX_FULL             0x01

/* Which connector port. */
#define PORT_TP                 0x00
#define PORT_AUI                0x01
#define PORT_MII                0x02
#define PORT_FIBRE              0x03
#define PORT_BNC                0x04
#define PORT_OTHER              0xff

/* Which transceiver to use. */
#define XCVR_INTERNAL           0x00
#define XCVR_EXTERNAL           0x01
#define XCVR_DUMMY1             0x02
#define XCVR_DUMMY2             0x03
#define XCVR_DUMMY3             0x04

/* Enable or disable autonegotiation.  If this is set to enable,
 * the forced link modes above are completely ignored.
 */
#define AUTONEG_DISABLE         0x00
#define AUTONEG_ENABLE          0x01

/* Mode MDI or MDI-X */
#define ETH_TP_MDI_INVALID      0x00
#define ETH_TP_MDI              0x01
#define ETH_TP_MDI_X            0x02

/* Wake-On-Lan options. */
#define WAKE_PHY                (1 << 0)
#define WAKE_UCAST              (1 << 1)
#define WAKE_MCAST              (1 << 2)
#define WAKE_BCAST              (1 << 3)
#define WAKE_ARP                (1 << 4)
#define WAKE_MAGIC              (1 << 5)
#define WAKE_MAGICSECURE        (1 << 6) /* only meaningful if WAKE_MAGIC */

/* L3-L4 network traffic flow types */
#define TCP_V4_FLOW     0x01
#define UDP_V4_FLOW     0x02
#define SCTP_V4_FLOW    0x03
#define AH_ESP_V4_FLOW  0x04
#define TCP_V6_FLOW     0x05
#define UDP_V6_FLOW     0x06
#define SCTP_V6_FLOW    0x07
#define AH_ESP_V6_FLOW  0x08
#define AH_V4_FLOW      0x09
#define ESP_V4_FLOW     0x0a
#define AH_V6_FLOW      0x0b
#define ESP_V6_FLOW     0x0c
#define IP_USER_FLOW    0x0d

/* L3-L4 network traffic flow hash options */
#define RXH_L2DA        (1 << 1)
#define RXH_VLAN        (1 << 2)
#define RXH_L3_PROTO    (1 << 3)
#define RXH_IP_SRC      (1 << 4)
#define RXH_IP_DST      (1 << 5)
#define RXH_L4_B_0_1    (1 << 6) /* src port in case of TCP/UDP/SCTP */
#define RXH_L4_B_2_3    (1 << 7) /* dst port in case of TCP/UDP/SCTP */
#define RXH_DISCARD     (1 << 31)

#define RX_CLS_FLOW_DISC        0xffffffffffffffffULL

#endif /* _LINUX_ETHTOOL_H */