include/linux/suspend.h

   1 #ifndef _LINUX_SUSPEND_H
   2 #define _LINUX_SUSPEND_H
   3
   4 #include <linux/swap.h>
   5 #include <linux/notifier.h>
   6 #include <linux/init.h>
   7 #include <linux/pm.h>
   8 #include <linux/mm.h>
   9 #include <asm/errno.h>
  10
  11 #if defined(CONFIG_PM_SLEEP) && defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
  12 extern void pm_set_vt_switch(int);
  13 extern int pm_prepare_console(void);
  14 extern void pm_restore_console(void);
  15 #else
  16 static inline void pm_set_vt_switch(int do_switch)
  17 {
  18 }
  19
  20 static inline int pm_prepare_console(void)
  21 {
  22         return 0;
  23 }
  24
  25 static inline void pm_restore_console(void)
  26 {
  27 }
  28 #endif
  29
  30 typedef int __bitwise suspend_state_t;
  31
  32 #define PM_SUSPEND_ON           ((__force suspend_state_t) 0)
  33 #define PM_SUSPEND_STANDBY      ((__force suspend_state_t) 1)
  34 #define PM_SUSPEND_MEM          ((__force suspend_state_t) 3)
  35 #define PM_SUSPEND_MAX          ((__force suspend_state_t) 4)
  36
  37 /**
  38  * struct platform_suspend_ops - Callbacks for managing platform dependent
  39  *      system sleep states.
  40  *
  41  * @valid: Callback to determine if given system sleep state is supported by
  42  *      the platform.
  43  *      Valid (ie. supported) states are advertised in /sys/power/state.  Note
  44  *      that it still may be impossible to enter given system sleep state if the
  45  *      conditions aren't right.
  46  *      There is the %suspend_valid_only_mem function available that can be
  47  *      assigned to this if the platform only supports mem sleep.
  48  *
  49  * @begin: Initialise a transition to given system sleep state.
  50  *      @begin() is executed right prior to suspending devices.  The information
  51  *      conveyed to the platform code by @begin() should be disregarded by it as
  52  *      soon as @end() is executed.  If @begin() fails (ie. returns nonzero),
  53  *      @prepare(), @enter() and @finish() will not be called by the PM core.
  54  *      This callback is optional.  However, if it is implemented, the argument
  55  *      passed to @enter() is redundant and should be ignored.
  56  *
  57  * @prepare: Prepare the platform for entering the system sleep state indicated
  58  *      by @begin().
  59  *      @prepare() is called right after devices have been suspended (ie. the
  60  *      appropriate .suspend() method has been executed for each device) and
  61  *      before device drivers' late suspend callbacks are executed.  It returns
  62  *      0 on success or a negative error code otherwise, in which case the
  63  *      system cannot enter the desired sleep state (@prepare_late(), @enter(),
  64  *      @wake(), and @finish() will not be called in that case).
  65  *
  66  * @prepare_late: Finish preparing the platform for entering the system sleep
  67  *      state indicated by @begin().
  68  *      @prepare_late is called before disabling nonboot CPUs and after
  69  *      device drivers' late suspend callbacks have been executed.  It returns
  70  *      0 on success or a negative error code otherwise, in which case the
  71  *      system cannot enter the desired sleep state (@enter() and @wake()).
  72  *
  73  * @enter: Enter the system sleep state indicated by @begin() or represented by
  74  *      the argument if @begin() is not implemented.
  75  *      This callback is mandatory.  It returns 0 on success or a negative
  76  *      error code otherwise, in which case the system cannot enter the desired
  77  *      sleep state.
  78  *
  79  * @wake: Called when the system has just left a sleep state, right after
  80  *      the nonboot CPUs have been enabled and before device drivers' early
  81  *      resume callbacks are executed.
  82  *      This callback is optional, but should be implemented by the platforms
  83  *      that implement @prepare_late().  If implemented, it is always called
  84  *      after @enter(), even if @enter() fails.
  85  *
  86  * @finish: Finish wake-up of the platform.
  87  *      @finish is called right prior to calling device drivers' regular suspend
  88  *      callbacks.
  89  *      This callback is optional, but should be implemented by the platforms
  90  *      that implement @prepare().  If implemented, it is always called after
  91  *      @enter() and @wake(), if implemented, even if any of them fails.
  92  *
  93  * @end: Called by the PM core right after resuming devices, to indicate to
  94  *      the platform that the system has returned to the working state or
  95  *      the transition to the sleep state has been aborted.
  96  *      This callback is optional, but should be implemented by the platforms
  97  *      that implement @begin().  Accordingly, platforms implementing @begin()
  98  *      should also provide a @end() which cleans up transitions aborted before
  99  *      @enter().
 100  *
 101  * @recover: Recover the platform from a suspend failure.
 102  *      Called by the PM core if the suspending of devices fails.
 103  *      This callback is optional and should only be implemented by platforms
 104  *      which require special recovery actions in that situation.
 105  */
 106 struct platform_suspend_ops {
 107         int (*valid)(suspend_state_t state);
 108         int (*begin)(suspend_state_t state);
 109         int (*prepare)(void);
 110         int (*prepare_late)(void);
 111         int (*enter)(suspend_state_t state);
 112         void (*wake)(void);
 113         void (*finish)(void);
 114         void (*end)(void);
 115         void (*recover)(void);
 116 };
 117
 118 #ifdef CONFIG_SUSPEND
 119 /**
 120  * suspend_set_ops - set platform dependent suspend operations
 121  * @ops: The new suspend operations to set.
 122  */
 123 extern void suspend_set_ops(struct platform_suspend_ops *ops);
 124 extern int suspend_valid_only_mem(suspend_state_t state);
 125
 126 /**
 127  * arch_suspend_disable_irqs - disable IRQs for suspend
 128  *
 129  * Disables IRQs (in the default case). This is a weak symbol in the common
 130  * code and thus allows architectures to override it if more needs to be
 131  * done. Not called for suspend to disk.
 132  */
 133 extern void arch_suspend_disable_irqs(void);
 134
 135 /**
 136  * arch_suspend_enable_irqs - enable IRQs after suspend
 137  *
 138  * Enables IRQs (in the default case). This is a weak symbol in the common
 139  * code and thus allows architectures to override it if more needs to be
 140  * done. Not called for suspend to disk.
 141  */
 142 extern void arch_suspend_enable_irqs(void);
 143
 144 extern int pm_suspend(suspend_state_t state);
 145 #else /* !CONFIG_SUSPEND */
 146 #define suspend_valid_only_mem  NULL
 147
 148 static inline void suspend_set_ops(struct platform_suspend_ops *ops) {}
 149 static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; }
 150 #endif /* !CONFIG_SUSPEND */
 151
 152 /* struct pbe is used for creating lists of pages that should be restored
 153  * atomically during the resume from disk, because the page frames they have
 154  * occupied before the suspend are in use.
 155  */
 156 struct pbe {
 157         void *address;          /* address of the copy */
 158         void *orig_address;     /* original address of a page */
 159         struct pbe *next;
 160 };
 161
 162 /* mm/page_alloc.c */
 163 extern void mark_free_pages(struct zone *zone);
 164
 165 /**
 166  * struct platform_hibernation_ops - hibernation platform support
 167  *
 168  * The methods in this structure allow a platform to carry out special
 169  * operations required by it during a hibernation transition.
 170  *
 171  * All the methods below, except for @recover(), must be implemented.
 172  *
 173  * @begin: Tell the platform driver that we're starting hibernation.
 174  *      Called right after shrinking memory and before freezing devices.
 175  *
 176  * @end: Called by the PM core right after resuming devices, to indicate to
 177  *      the platform that the system has returned to the working state.
 178  *
 179  * @pre_snapshot: Prepare the platform for creating the hibernation image.
 180  *      Called right after devices have been frozen and before the nonboot
 181  *      CPUs are disabled (runs with IRQs on).
 182  *
 183  * @finish: Restore the previous state of the platform after the hibernation
 184  *      image has been created *or* put the platform into the normal operation
 185  *      mode after the hibernation (the same method is executed in both cases).
 186  *      Called right after the nonboot CPUs have been enabled and before
 187  *      thawing devices (runs with IRQs on).
 188  *
 189  * @prepare: Prepare the platform for entering the low power state.
 190  *      Called right after the hibernation image has been saved and before
 191  *      devices are prepared for entering the low power state.
 192  *
 193  * @enter: Put the system into the low power state after the hibernation image
 194  *      has been saved to disk.
 195  *      Called after the nonboot CPUs have been disabled and all of the low
 196  *      level devices have been shut down (runs with IRQs off).
 197  *
 198  * @leave: Perform the first stage of the cleanup after the system sleep state
 199  *      indicated by @set_target() has been left.
 200  *      Called right after the control has been passed from the boot kernel to
 201  *      the image kernel, before the nonboot CPUs are enabled and before devices
 202  *      are resumed.  Executed with interrupts disabled.
 203  *
 204  * @pre_restore: Prepare system for the restoration from a hibernation image.
 205  *      Called right after devices have been frozen and before the nonboot
 206  *      CPUs are disabled (runs with IRQs on).
 207  *
 208  * @restore_cleanup: Clean up after a failing image restoration.
 209  *      Called right after the nonboot CPUs have been enabled and before
 210  *      thawing devices (runs with IRQs on).
 211  *
 212  * @recover: Recover the platform from a failure to suspend devices.
 213  *      Called by the PM core if the suspending of devices during hibernation
 214  *      fails.  This callback is optional and should only be implemented by
 215  *      platforms which require special recovery actions in that situation.
 216  */
 217 struct platform_hibernation_ops {
 218         int (*begin)(void);
 219         void (*end)(void);
 220         int (*pre_snapshot)(void);
 221         void (*finish)(void);
 222         int (*prepare)(void);
 223         int (*enter)(void);
 224         void (*leave)(void);
 225         int (*pre_restore)(void);
 226         void (*restore_cleanup)(void);
 227         void (*recover)(void);
 228 };
 229
 230 #ifdef CONFIG_HIBERNATION
 231 /* kernel/power/snapshot.c */
 232 extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
 233 static inline void __init register_nosave_region(unsigned long b, unsigned long e)
 234 {
 235         __register_nosave_region(b, e, 0);
 236 }
 237 static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
 238 {
 239         __register_nosave_region(b, e, 1);
 240 }
 241 extern int swsusp_page_is_forbidden(struct page *);
 242 extern void swsusp_set_page_free(struct page *);
 243 extern void swsusp_unset_page_free(struct page *);
 244 extern unsigned long get_safe_page(gfp_t gfp_mask);
 245
 246 extern void hibernation_set_ops(struct platform_hibernation_ops *ops);
 247 extern int hibernate(void);
 248 extern bool system_entering_hibernation(void);
 249 #else /* CONFIG_HIBERNATION */
 250 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
 251 static inline void swsusp_set_page_free(struct page *p) {}
 252 static inline void swsusp_unset_page_free(struct page *p) {}
 253
 254 static inline void hibernation_set_ops(struct platform_hibernation_ops *ops) {}
 255 static inline int hibernate(void) { return -ENOSYS; }
 256 static inline bool system_entering_hibernation(void) { return false; }
 257 #endif /* CONFIG_HIBERNATION */
 258
 259 #ifdef CONFIG_HIBERNATION_NVS
 260 extern int hibernate_nvs_register(unsigned long start, unsigned long size);
 261 extern int hibernate_nvs_alloc(void);
 262 extern void hibernate_nvs_free(void);
 263 extern void hibernate_nvs_save(void);
 264 extern void hibernate_nvs_restore(void);
 265 #else /* CONFIG_HIBERNATION_NVS */
 266 static inline int hibernate_nvs_register(unsigned long a, unsigned long b)
 267 {
 268         return 0;
 269 }
 270 static inline int hibernate_nvs_alloc(void) { return 0; }
 271 static inline void hibernate_nvs_free(void) {}
 272 static inline void hibernate_nvs_save(void) {}
 273 static inline void hibernate_nvs_restore(void) {}
 274 #endif /* CONFIG_HIBERNATION_NVS */
 275
 276 #ifdef CONFIG_PM_SLEEP
 277 void save_processor_state(void);
 278 void restore_processor_state(void);
 279
 280 /* kernel/power/main.c */
 281 extern int register_pm_notifier(struct notifier_block *nb);
 282 extern int unregister_pm_notifier(struct notifier_block *nb);
 283
 284 #define pm_notifier(fn, pri) {                          \
 285         static struct notifier_block fn##_nb =                  \
 286                 { .notifier_call = fn, .priority = pri };       \
 287         register_pm_notifier(&fn##_nb);                 \
 288 }
 289 #else /* !CONFIG_PM_SLEEP */
 290
 291 static inline int register_pm_notifier(struct notifier_block *nb)
 292 {
 293         return 0;
 294 }
 295
 296 static inline int unregister_pm_notifier(struct notifier_block *nb)
 297 {
 298         return 0;
 299 }
 300
 301 #define pm_notifier(fn, pri)    do { (void)(fn); } while (0)
 302 #endif /* !CONFIG_PM_SLEEP */
 303
 304 #ifndef CONFIG_HIBERNATION
 305 static inline void register_nosave_region(unsigned long b, unsigned long e)
 306 {
 307 }
 308 static inline void register_nosave_region_late(unsigned long b, unsigned long e)
 309 {
 310 }
 311 #endif
 312
 313 extern struct mutex pm_mutex;
 314
 315 #endif /* _LINUX_SUSPEND_H */