4 * This is a collection of several routines from gzip-1.0.3
7 * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
8 * puts by Nick Holloway 1993, better puts by Martin Mares 1995
9 * adaptation for Linux/CRIS Axis Communications AB, 1999
13 /* where the piggybacked kernel image expects itself to live.
14 * it is the same address we use when we network load an uncompressed
15 * image into DRAM, and it is the address the kernel is linked to live
19 #define KERNEL_LOAD_ADR 0x40004000
21 #include <linux/types.h>
23 #ifdef CONFIG_ETRAX_ARCH_V32
24 #include <hwregs/reg_rdwr.h>
25 #include <hwregs/reg_map.h>
26 #include <hwregs/ser_defs.h>
27 #include <hwregs/pinmux_defs.h>
28 #ifdef CONFIG_CRIS_MACH_ARTPEC3
29 #include <hwregs/clkgen_defs.h>
32 #include <arch/svinto.h>
42 void *memset(void *s
, int c
, size_t n
);
43 void *memcpy(void *__dest
, __const
void *__src
, size_t __n
);
45 #define memzero(s, n) memset((s), 0, (n))
47 typedef unsigned char uch
;
48 typedef unsigned short ush
;
49 typedef unsigned long ulg
;
51 #define WSIZE 0x8000 /* Window size must be at least 32k, */
52 /* and a power of two */
54 static uch
*inbuf
; /* input buffer */
55 static uch window
[WSIZE
]; /* Sliding window buffer */
57 unsigned inptr
= 0; /* index of next byte to be processed in inbuf
58 * After decompression it will contain the
59 * compressed size, and head.S will read it.
62 static unsigned outcnt
= 0; /* bytes in output buffer */
65 #define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
66 #define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
67 #define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
68 #define ORIG_NAME 0x08 /* bit 3 set: original file name present */
69 #define COMMENT 0x10 /* bit 4 set: file comment present */
70 #define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
71 #define RESERVED 0xC0 /* bit 6,7: reserved */
73 #define get_byte() (inbuf[inptr++])
75 /* Diagnostic functions */
77 # define Assert(cond, msg) do { \
81 # define Trace(x) fprintf x
82 # define Tracev(x) do { \
86 # define Tracevv(x) do { \
90 # define Tracec(c, x) do { \
94 # define Tracecv(c, x) do { \
95 if (verbose > 1 && (c)) \
99 # define Assert(cond, msg)
103 # define Tracec(c, x)
104 # define Tracecv(c, x)
107 static void flush_window(void);
108 static void error(char *m
);
109 static void puts(const char *);
111 extern char *input_data
; /* lives in head.S */
113 static long bytes_out
;
114 static uch
*output_data
;
115 static unsigned long output_ptr
;
117 /* the "heap" is put directly after the BSS ends, at end */
120 static long free_mem_ptr
= (long)&_end
;
121 static long free_mem_end_ptr
;
123 #include "../../../../../lib/inflate.c"
125 /* decompressor info and error messages to serial console */
127 #ifdef CONFIG_ETRAX_ARCH_V32
128 static inline void serout(const char *s
, reg_scope_instances regi_ser
)
130 reg_ser_rs_stat_din rs
;
131 reg_ser_rw_dout dout
= {.data
= *s
};
134 rs
= REG_RD(ser
, regi_ser
, rs_stat_din
);
136 while (!rs
.tr_rdy
);/* Wait for transceiver. */
138 REG_WR(ser
, regi_ser
, rw_dout
, dout
);
142 static void puts(const char *s
)
144 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
146 #ifdef CONFIG_ETRAX_DEBUG_PORT0
147 #ifdef CONFIG_ETRAX_ARCH_V32
148 serout(s
, regi_ser0
);
150 while (!(*R_SERIAL0_STATUS
& (1 << 5)))
152 *R_SERIAL0_TR_DATA
= *s
++;
155 #ifdef CONFIG_ETRAX_DEBUG_PORT1
156 #ifdef CONFIG_ETRAX_ARCH_V32
157 serout(s
, regi_ser1
);
159 while (!(*R_SERIAL1_STATUS
& (1 << 5)))
161 *R_SERIAL1_TR_DATA
= *s
++;
164 #ifdef CONFIG_ETRAX_DEBUG_PORT2
165 #ifdef CONFIG_ETRAX_ARCH_V32
166 serout(s
, regi_ser2
);
168 while (!(*R_SERIAL2_STATUS
& (1 << 5)))
170 *R_SERIAL2_TR_DATA
= *s
++;
173 #ifdef CONFIG_ETRAX_DEBUG_PORT3
174 #ifdef CONFIG_ETRAX_ARCH_V32
175 serout(s
, regi_ser3
);
177 while (!(*R_SERIAL3_STATUS
& (1 << 5)))
179 *R_SERIAL3_TR_DATA
= *s
++;
184 /* CONFIG_ETRAX_DEBUG_PORT_NULL */
188 void *memset(void *s
, int c
, size_t n
)
193 for (i
=0;i
<n
;i
++) ss
[i
] = c
;
198 void *memcpy(void *__dest
, __const
void *__src
, size_t __n
)
201 char *d
= (char *)__dest
, *s
= (char *)__src
;
203 for (i
= 0; i
< __n
; i
++)
209 /* ===========================================================================
210 * Write the output window window[0..outcnt-1] and update crc and bytes_out.
211 * (Used for the decompressed data only.)
214 static void flush_window(void)
216 ulg c
= crc
; /* temporary variable */
221 out
= &output_data
[output_ptr
];
222 for (n
= 0; n
< outcnt
; n
++) {
226 c
= crc_32_tab
[((int)c
^ ch
) & 0xff] ^ (c
>> 8);
229 bytes_out
+= (ulg
)outcnt
;
230 output_ptr
+= (ulg
)outcnt
;
234 static void error(char *x
)
238 puts("\n\n -- System halted\n");
243 void setup_normal_output_buffer(void)
245 output_data
= (char *)KERNEL_LOAD_ADR
;
248 #ifdef CONFIG_ETRAX_ARCH_V32
249 static inline void serial_setup(reg_scope_instances regi_ser
)
251 reg_ser_rw_xoff xoff
;
252 reg_ser_rw_tr_ctrl tr_ctrl
;
253 reg_ser_rw_rec_ctrl rec_ctrl
;
254 reg_ser_rw_tr_baud_div tr_baud
;
255 reg_ser_rw_rec_baud_div rec_baud
;
258 xoff
= REG_RD(ser
, regi_ser
, rw_xoff
);
261 xoff
.automatic
= regk_ser_no
;
263 REG_WR(ser
, regi_ser
, rw_xoff
, xoff
);
265 /* Set baudrate and stopbits. */
266 tr_ctrl
= REG_RD(ser
, regi_ser
, rw_tr_ctrl
);
267 rec_ctrl
= REG_RD(ser
, regi_ser
, rw_rec_ctrl
);
268 tr_baud
= REG_RD(ser
, regi_ser
, rw_tr_baud_div
);
269 rec_baud
= REG_RD(ser
, regi_ser
, rw_rec_baud_div
);
271 tr_ctrl
.stop_bits
= 1; /* 2 stop bits. */
272 tr_ctrl
.en
= 1; /* enable transmitter */
273 rec_ctrl
.en
= 1; /* enabler receiver */
276 * The baudrate setup used to be a bit fishy, but now transmitter and
277 * receiver are both set to the intended baud rate, 115200.
278 * The magic value is 29.493 MHz.
280 tr_ctrl
.base_freq
= regk_ser_f29_493
;
281 rec_ctrl
.base_freq
= regk_ser_f29_493
;
282 tr_baud
.div
= (29493000 / 8) / 115200;
283 rec_baud
.div
= (29493000 / 8) / 115200;
285 REG_WR(ser
, regi_ser
, rw_tr_ctrl
, tr_ctrl
);
286 REG_WR(ser
, regi_ser
, rw_tr_baud_div
, tr_baud
);
287 REG_WR(ser
, regi_ser
, rw_rec_ctrl
, rec_ctrl
);
288 REG_WR(ser
, regi_ser
, rw_rec_baud_div
, rec_baud
);
292 void decompress_kernel(void)
297 #ifdef CONFIG_ETRAX_ARCH_V32
298 /* Need at least a CRISv32 to run. */
300 #if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
301 defined(CONFIG_ETRAX_DEBUG_PORT2) || \
302 defined(CONFIG_ETRAX_DEBUG_PORT3)
303 reg_pinmux_rw_hwprot hwprot
;
305 #ifdef CONFIG_CRIS_MACH_ARTPEC3
306 reg_clkgen_rw_clk_ctrl clk_ctrl
;
308 /* Enable corresponding clock region when serial 1..3 selected */
310 clk_ctrl
= REG_RD(clkgen
, regi_clkgen
, rw_clk_ctrl
);
311 clk_ctrl
.sser_ser_dma6_7
= regk_clkgen_yes
;
312 REG_WR(clkgen
, regi_clkgen
, rw_clk_ctrl
, clk_ctrl
);
315 /* pinmux setup for ports 1..3 */
316 hwprot
= REG_RD(pinmux
, regi_pinmux
, rw_hwprot
);
320 #ifdef CONFIG_ETRAX_DEBUG_PORT0
321 serial_setup(regi_ser0
);
323 #ifdef CONFIG_ETRAX_DEBUG_PORT1
324 hwprot
.ser1
= regk_pinmux_yes
;
325 serial_setup(regi_ser1
);
327 #ifdef CONFIG_ETRAX_DEBUG_PORT2
328 hwprot
.ser2
= regk_pinmux_yes
;
329 serial_setup(regi_ser2
);
331 #ifdef CONFIG_ETRAX_DEBUG_PORT3
332 hwprot
.ser3
= regk_pinmux_yes
;
333 serial_setup(regi_ser3
);
335 #if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
336 defined(CONFIG_ETRAX_DEBUG_PORT2) || \
337 defined(CONFIG_ETRAX_DEBUG_PORT3)
338 REG_WR(pinmux
, regi_pinmux
, rw_hwprot
, hwprot
);
341 /* input_data is set in head.S */
344 /* Need at least a crisv10 to run. */
347 /* input_data is set in head.S */
350 #ifdef CONFIG_ETRAX_DEBUG_PORT0
352 *R_SERIAL0_BAUD
= 0x99;
353 *R_SERIAL0_TR_CTRL
= 0x40;
355 #ifdef CONFIG_ETRAX_DEBUG_PORT1
357 *R_SERIAL1_BAUD
= 0x99;
358 *R_SERIAL1_TR_CTRL
= 0x40;
360 #ifdef CONFIG_ETRAX_DEBUG_PORT2
361 *R_GEN_CONFIG
= 0x08;
363 *R_SERIAL2_BAUD
= 0x99;
364 *R_SERIAL2_TR_CTRL
= 0x40;
366 #ifdef CONFIG_ETRAX_DEBUG_PORT3
367 *R_GEN_CONFIG
= 0x100;
369 *R_SERIAL3_BAUD
= 0x99;
370 *R_SERIAL3_TR_CTRL
= 0x40;
374 setup_normal_output_buffer();
378 __asm__
volatile ("move $vr,%0" : "=rm" (revision
));
379 if (revision
< compile_rev
) {
380 #ifdef CONFIG_ETRAX_ARCH_V32
381 puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
383 puts("You need an ETRAX 100LX to run linux 2.6\n");
388 puts("Uncompressing Linux...\n");
390 puts("Done. Now booting the kernel\n");