conn rcv_lock converted to spinlock, struct cor_sock created, kernel_packet skb_clone...
[cor_2_6_31.git] / drivers / i2c / busses / i2c-iop3xx.c
bloba75c75e77b926417f94524274c256d02fcf7b16b
1 /* ------------------------------------------------------------------------- */
2 /* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx & IXP46x */
3 /* ------------------------------------------------------------------------- */
4 /* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
5 * <Peter dot Milne at D hyphen TACQ dot com>
7 * With acknowledgements to i2c-algo-ibm_ocp.c by
8 * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
10 * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
12 * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
14 * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
15 * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
17 * Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005:
19 * - Use driver model to pass per-chip info instead of hardcoding and #ifdefs
20 * - Use ioremap/__raw_readl/__raw_writel instead of direct dereference
21 * - Make it work with IXP46x chips
22 * - Cleanup function names, coding style, etc
24 * - writing to slave address causes latchup on iop331.
25 * fix: driver refuses to address self.
27 * This program is free software; you can redistribute it and/or modify
28 * it under the terms of the GNU General Public License as published by
29 * the Free Software Foundation, version 2.
32 #include <linux/interrupt.h>
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/delay.h>
36 #include <linux/slab.h>
37 #include <linux/init.h>
38 #include <linux/errno.h>
39 #include <linux/platform_device.h>
40 #include <linux/i2c.h>
42 #include <asm/io.h>
44 #include "i2c-iop3xx.h"
46 /* global unit counter */
47 static int i2c_id;
49 static inline unsigned char
50 iic_cook_addr(struct i2c_msg *msg)
52 unsigned char addr;
54 addr = (msg->addr << 1);
56 if (msg->flags & I2C_M_RD)
57 addr |= 1;
60 * Read or Write?
62 if (msg->flags & I2C_M_REV_DIR_ADDR)
63 addr ^= 1;
65 return addr;
68 static void
69 iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
71 /* Follows devman 9.3 */
72 __raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET);
73 __raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET);
74 __raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET);
77 static void
78 iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
80 u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
82 /*
83 * Every time unit enable is asserted, GPOD needs to be cleared
84 * on IOP3XX to avoid data corruption on the bus.
86 #if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
87 if (iop3xx_adap->id == 0) {
88 gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
89 gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
90 } else {
91 gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW);
92 gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW);
94 #endif
95 /* NB SR bits not same position as CR IE bits :-( */
96 iop3xx_adap->SR_enabled =
97 IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD |
98 IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY;
100 cr |= IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE |
101 IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE;
103 __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
106 static void
107 iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap)
109 unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
111 cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE |
112 IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN);
114 __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
118 * NB: the handler has to clear the source of the interrupt!
119 * Then it passes the SR flags of interest to BH via adap data
121 static irqreturn_t
122 iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
124 struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
125 u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET);
127 if ((sr &= iop3xx_adap->SR_enabled)) {
128 __raw_writel(sr, iop3xx_adap->ioaddr + SR_OFFSET);
129 iop3xx_adap->SR_received |= sr;
130 wake_up_interruptible(&iop3xx_adap->waitq);
132 return IRQ_HANDLED;
135 /* check all error conditions, clear them , report most important */
136 static int
137 iop3xx_i2c_error(u32 sr)
139 int rc = 0;
141 if ((sr & IOP3XX_ISR_BERRD)) {
142 if ( !rc ) rc = -I2C_ERR_BERR;
144 if ((sr & IOP3XX_ISR_ALD)) {
145 if ( !rc ) rc = -I2C_ERR_ALD;
147 return rc;
150 static inline u32
151 iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
153 unsigned long flags;
154 u32 sr;
156 spin_lock_irqsave(&iop3xx_adap->lock, flags);
157 sr = iop3xx_adap->SR_received;
158 iop3xx_adap->SR_received = 0;
159 spin_unlock_irqrestore(&iop3xx_adap->lock, flags);
161 return sr;
165 * sleep until interrupted, then recover and analyse the SR
166 * saved by handler
168 typedef int (* compare_func)(unsigned test, unsigned mask);
169 /* returns 1 on correct comparison */
171 static int
172 iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
173 unsigned flags, unsigned* status,
174 compare_func compare)
176 unsigned sr = 0;
177 int interrupted;
178 int done;
179 int rc = 0;
181 do {
182 interrupted = wait_event_interruptible_timeout (
183 iop3xx_adap->waitq,
184 (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
185 1 * HZ;
187 if ((rc = iop3xx_i2c_error(sr)) < 0) {
188 *status = sr;
189 return rc;
190 } else if (!interrupted) {
191 *status = sr;
192 return -ETIMEDOUT;
194 } while(!done);
196 *status = sr;
198 return 0;
202 * Concrete compare_funcs
204 static int
205 all_bits_clear(unsigned test, unsigned mask)
207 return (test & mask) == 0;
210 static int
211 any_bits_set(unsigned test, unsigned mask)
213 return (test & mask) != 0;
216 static int
217 iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
219 return iop3xx_i2c_wait_event(
220 iop3xx_adap,
221 IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
222 status, any_bits_set);
225 static int
226 iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
228 return iop3xx_i2c_wait_event(
229 iop3xx_adap,
230 IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
231 status, any_bits_set);
234 static int
235 iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
237 return iop3xx_i2c_wait_event(
238 iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear);
241 static int
242 iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
243 struct i2c_msg* msg)
245 unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
246 int status;
247 int rc;
249 /* avoid writing to my slave address (hangs on 80331),
250 * forbidden in Intel developer manual
252 if (msg->addr == MYSAR) {
253 return -EBUSY;
256 __raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
258 cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
259 cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE;
261 __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
262 rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
264 return rc;
267 static int
268 iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
269 int stop)
271 unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
272 int status;
273 int rc = 0;
275 __raw_writel(byte, iop3xx_adap->ioaddr + DBR_OFFSET);
276 cr &= ~IOP3XX_ICR_MSTART;
277 if (stop) {
278 cr |= IOP3XX_ICR_MSTOP;
279 } else {
280 cr &= ~IOP3XX_ICR_MSTOP;
282 cr |= IOP3XX_ICR_TBYTE;
283 __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
284 rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
286 return rc;
289 static int
290 iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
291 int stop)
293 unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
294 int status;
295 int rc = 0;
297 cr &= ~IOP3XX_ICR_MSTART;
299 if (stop) {
300 cr |= IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK;
301 } else {
302 cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
304 cr |= IOP3XX_ICR_TBYTE;
305 __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
307 rc = iop3xx_i2c_wait_rx_done(iop3xx_adap, &status);
309 *byte = __raw_readl(iop3xx_adap->ioaddr + DBR_OFFSET);
311 return rc;
314 static int
315 iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count)
317 struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
318 int ii;
319 int rc = 0;
321 for (ii = 0; rc == 0 && ii != count; ++ii)
322 rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1);
323 return rc;
326 static int
327 iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
329 struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
330 int ii;
331 int rc = 0;
333 for (ii = 0; rc == 0 && ii != count; ++ii)
334 rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1);
336 return rc;
340 * Description: This function implements combined transactions. Combined
341 * transactions consist of combinations of reading and writing blocks of data.
342 * FROM THE SAME ADDRESS
343 * Each transfer (i.e. a read or a write) is separated by a repeated start
344 * condition.
346 static int
347 iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
349 struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
350 int rc;
352 rc = iop3xx_i2c_send_target_addr(iop3xx_adap, pmsg);
353 if (rc < 0) {
354 return rc;
357 if ((pmsg->flags&I2C_M_RD)) {
358 return iop3xx_i2c_readbytes(i2c_adap, pmsg->buf, pmsg->len);
359 } else {
360 return iop3xx_i2c_writebytes(i2c_adap, pmsg->buf, pmsg->len);
365 * master_xfer() - main read/write entry
367 static int
368 iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
369 int num)
371 struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
372 int im = 0;
373 int ret = 0;
374 int status;
376 iop3xx_i2c_wait_idle(iop3xx_adap, &status);
377 iop3xx_i2c_reset(iop3xx_adap);
378 iop3xx_i2c_enable(iop3xx_adap);
380 for (im = 0; ret == 0 && im != num; im++) {
381 ret = iop3xx_i2c_handle_msg(i2c_adap, &msgs[im]);
384 iop3xx_i2c_transaction_cleanup(iop3xx_adap);
386 if(ret)
387 return ret;
389 return im;
392 static u32
393 iop3xx_i2c_func(struct i2c_adapter *adap)
395 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
398 static const struct i2c_algorithm iop3xx_i2c_algo = {
399 .master_xfer = iop3xx_i2c_master_xfer,
400 .functionality = iop3xx_i2c_func,
403 static int
404 iop3xx_i2c_remove(struct platform_device *pdev)
406 struct i2c_adapter *padapter = platform_get_drvdata(pdev);
407 struct i2c_algo_iop3xx_data *adapter_data =
408 (struct i2c_algo_iop3xx_data *)padapter->algo_data;
409 struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
410 unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET);
413 * Disable the actual HW unit
415 cr &= ~(IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE |
416 IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE);
417 __raw_writel(cr, adapter_data->ioaddr + CR_OFFSET);
419 iounmap((void __iomem*)adapter_data->ioaddr);
420 release_mem_region(res->start, IOP3XX_I2C_IO_SIZE);
421 kfree(adapter_data);
422 kfree(padapter);
424 platform_set_drvdata(pdev, NULL);
426 return 0;
429 static int
430 iop3xx_i2c_probe(struct platform_device *pdev)
432 struct resource *res;
433 int ret, irq;
434 struct i2c_adapter *new_adapter;
435 struct i2c_algo_iop3xx_data *adapter_data;
437 new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
438 if (!new_adapter) {
439 ret = -ENOMEM;
440 goto out;
443 adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
444 if (!adapter_data) {
445 ret = -ENOMEM;
446 goto free_adapter;
449 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
450 if (!res) {
451 ret = -ENODEV;
452 goto free_both;
455 if (!request_mem_region(res->start, IOP3XX_I2C_IO_SIZE, pdev->name)) {
456 ret = -EBUSY;
457 goto free_both;
460 /* set the adapter enumeration # */
461 adapter_data->id = i2c_id++;
463 adapter_data->ioaddr = (u32)ioremap(res->start, IOP3XX_I2C_IO_SIZE);
464 if (!adapter_data->ioaddr) {
465 ret = -ENOMEM;
466 goto release_region;
469 irq = platform_get_irq(pdev, 0);
470 if (irq < 0) {
471 ret = -ENXIO;
472 goto unmap;
474 ret = request_irq(irq, iop3xx_i2c_irq_handler, 0,
475 pdev->name, adapter_data);
477 if (ret) {
478 ret = -EIO;
479 goto unmap;
482 memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
483 new_adapter->owner = THIS_MODULE;
484 new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
485 new_adapter->dev.parent = &pdev->dev;
486 new_adapter->nr = pdev->id;
489 * Default values...should these come in from board code?
491 new_adapter->timeout = HZ;
492 new_adapter->algo = &iop3xx_i2c_algo;
494 init_waitqueue_head(&adapter_data->waitq);
495 spin_lock_init(&adapter_data->lock);
497 iop3xx_i2c_reset(adapter_data);
498 iop3xx_i2c_enable(adapter_data);
500 platform_set_drvdata(pdev, new_adapter);
501 new_adapter->algo_data = adapter_data;
503 i2c_add_numbered_adapter(new_adapter);
505 return 0;
507 unmap:
508 iounmap((void __iomem*)adapter_data->ioaddr);
510 release_region:
511 release_mem_region(res->start, IOP3XX_I2C_IO_SIZE);
513 free_both:
514 kfree(adapter_data);
516 free_adapter:
517 kfree(new_adapter);
519 out:
520 return ret;
524 static struct platform_driver iop3xx_i2c_driver = {
525 .probe = iop3xx_i2c_probe,
526 .remove = iop3xx_i2c_remove,
527 .driver = {
528 .owner = THIS_MODULE,
529 .name = "IOP3xx-I2C",
533 static int __init
534 i2c_iop3xx_init (void)
536 return platform_driver_register(&iop3xx_i2c_driver);
539 static void __exit
540 i2c_iop3xx_exit (void)
542 platform_driver_unregister(&iop3xx_i2c_driver);
543 return;
546 module_init (i2c_iop3xx_init);
547 module_exit (i2c_iop3xx_exit);
549 MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>");
550 MODULE_DESCRIPTION("IOP3xx iic algorithm and driver");
551 MODULE_LICENSE("GPL");
552 MODULE_ALIAS("platform:IOP3xx-I2C");