2 * Copyright(c) 2007 Intel Corporation. All rights reserved.
3 * Copyright(c) 2008 Red Hat, Inc. All rights reserved.
4 * Copyright(c) 2008 Mike Christie
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * You should have received a copy of the GNU General Public License along with
16 * this program; if not, write to the Free Software Foundation, Inc.,
17 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 * Maintained at www.Open-FCoE.org
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
31 #include <scsi/scsi_tcq.h>
32 #include <scsi/scsi.h>
33 #include <scsi/scsi_host.h>
34 #include <scsi/scsi_device.h>
35 #include <scsi/scsi_cmnd.h>
37 #include <scsi/fc/fc_fc2.h>
39 #include <scsi/libfc.h>
40 #include <scsi/fc_encode.h>
42 MODULE_AUTHOR("Open-FCoE.org");
43 MODULE_DESCRIPTION("libfc");
44 MODULE_LICENSE("GPL v2");
46 unsigned int fc_debug_logging
;
47 module_param_named(debug_logging
, fc_debug_logging
, int, S_IRUGO
|S_IWUSR
);
48 MODULE_PARM_DESC(debug_logging
, "a bit mask of logging levels");
50 static struct kmem_cache
*scsi_pkt_cachep
;
52 /* SRB state definitions */
53 #define FC_SRB_FREE 0 /* cmd is free */
54 #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */
55 #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */
56 #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */
57 #define FC_SRB_ABORTED (1 << 3) /* abort acknowleged */
58 #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */
59 #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */
60 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */
61 #define FC_SRB_NOMEM (1 << 7) /* dropped to out of mem */
63 #define FC_SRB_READ (1 << 1)
64 #define FC_SRB_WRITE (1 << 0)
67 * The SCp.ptr should be tested and set under the host lock. NULL indicates
68 * that the command has been retruned to the scsi layer.
70 #define CMD_SP(Cmnd) ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
71 #define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
72 #define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual)
73 #define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status)
74 #define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual)
76 struct fc_fcp_internal
{
77 mempool_t
*scsi_pkt_pool
;
78 struct list_head scsi_pkt_queue
;
82 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
86 * FC scsi I/O related functions
88 static void fc_fcp_recv_data(struct fc_fcp_pkt
*, struct fc_frame
*);
89 static void fc_fcp_recv(struct fc_seq
*, struct fc_frame
*, void *);
90 static void fc_fcp_resp(struct fc_fcp_pkt
*, struct fc_frame
*);
91 static void fc_fcp_complete_locked(struct fc_fcp_pkt
*);
92 static void fc_tm_done(struct fc_seq
*, struct fc_frame
*, void *);
93 static void fc_fcp_error(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
);
94 static void fc_timeout_error(struct fc_fcp_pkt
*);
95 static void fc_fcp_timeout(unsigned long data
);
96 static void fc_fcp_rec(struct fc_fcp_pkt
*);
97 static void fc_fcp_rec_error(struct fc_fcp_pkt
*, struct fc_frame
*);
98 static void fc_fcp_rec_resp(struct fc_seq
*, struct fc_frame
*, void *);
99 static void fc_io_compl(struct fc_fcp_pkt
*);
101 static void fc_fcp_srr(struct fc_fcp_pkt
*, enum fc_rctl
, u32
);
102 static void fc_fcp_srr_resp(struct fc_seq
*, struct fc_frame
*, void *);
103 static void fc_fcp_srr_error(struct fc_fcp_pkt
*, struct fc_frame
*);
106 * command status codes
108 #define FC_COMPLETE 0
109 #define FC_CMD_ABORTED 1
110 #define FC_CMD_RESET 2
111 #define FC_CMD_PLOGO 3
113 #define FC_TRANS_ERR 5
114 #define FC_DATA_OVRRUN 6
115 #define FC_DATA_UNDRUN 7
117 #define FC_HRD_ERROR 9
118 #define FC_CMD_TIME_OUT 10
121 * Error recovery timeout values.
123 #define FC_SCSI_ER_TIMEOUT (10 * HZ)
124 #define FC_SCSI_TM_TOV (10 * HZ)
125 #define FC_SCSI_REC_TOV (2 * HZ)
126 #define FC_HOST_RESET_TIMEOUT (30 * HZ)
128 #define FC_MAX_ERROR_CNT 5
129 #define FC_MAX_RECOV_RETRY 3
131 #define FC_FCP_DFLT_QUEUE_DEPTH 32
134 * fc_fcp_pkt_alloc - allocation routine for scsi_pkt packet
135 * @lp: fc lport struct
136 * @gfp: gfp flags for allocation
138 * This is used by upper layer scsi driver.
139 * Return Value : scsi_pkt structure or null on allocation failure.
140 * Context : call from process context. no locking required.
142 static struct fc_fcp_pkt
*fc_fcp_pkt_alloc(struct fc_lport
*lp
, gfp_t gfp
)
144 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lp
);
145 struct fc_fcp_pkt
*fsp
;
147 fsp
= mempool_alloc(si
->scsi_pkt_pool
, gfp
);
149 memset(fsp
, 0, sizeof(*fsp
));
151 atomic_set(&fsp
->ref_cnt
, 1);
152 init_timer(&fsp
->timer
);
153 INIT_LIST_HEAD(&fsp
->list
);
154 spin_lock_init(&fsp
->scsi_pkt_lock
);
160 * fc_fcp_pkt_release() - release hold on scsi_pkt packet
161 * @fsp: fcp packet struct
163 * This is used by upper layer scsi driver.
164 * Context : call from process and interrupt context.
165 * no locking required
167 static void fc_fcp_pkt_release(struct fc_fcp_pkt
*fsp
)
169 if (atomic_dec_and_test(&fsp
->ref_cnt
)) {
170 struct fc_fcp_internal
*si
= fc_get_scsi_internal(fsp
->lp
);
172 mempool_free(fsp
, si
->scsi_pkt_pool
);
176 static void fc_fcp_pkt_hold(struct fc_fcp_pkt
*fsp
)
178 atomic_inc(&fsp
->ref_cnt
);
182 * fc_fcp_pkt_destory() - release hold on scsi_pkt packet
183 * @seq: exchange sequence
184 * @fsp: fcp packet struct
186 * Release hold on scsi_pkt packet set to keep scsi_pkt
187 * till EM layer exch resource is not freed.
188 * Context : called from from EM layer.
189 * no locking required
191 static void fc_fcp_pkt_destroy(struct fc_seq
*seq
, void *fsp
)
193 fc_fcp_pkt_release(fsp
);
197 * fc_fcp_lock_pkt() - lock a packet and get a ref to it.
200 * We should only return error if we return a command to scsi-ml before
201 * getting a response. This can happen in cases where we send a abort, but
202 * do not wait for the response and the abort and command can be passing
203 * each other on the wire/network-layer.
205 * Note: this function locks the packet and gets a reference to allow
206 * callers to call the completion function while the lock is held and
207 * not have to worry about the packets refcount.
209 * TODO: Maybe we should just have callers grab/release the lock and
210 * have a function that they call to verify the fsp and grab a ref if
213 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt
*fsp
)
215 spin_lock_bh(&fsp
->scsi_pkt_lock
);
216 if (fsp
->state
& FC_SRB_COMPL
) {
217 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
221 fc_fcp_pkt_hold(fsp
);
225 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt
*fsp
)
227 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
228 fc_fcp_pkt_release(fsp
);
231 static void fc_fcp_timer_set(struct fc_fcp_pkt
*fsp
, unsigned long delay
)
233 if (!(fsp
->state
& FC_SRB_COMPL
))
234 mod_timer(&fsp
->timer
, jiffies
+ delay
);
237 static int fc_fcp_send_abort(struct fc_fcp_pkt
*fsp
)
242 fsp
->state
|= FC_SRB_ABORT_PENDING
;
243 return fsp
->lp
->tt
.seq_exch_abort(fsp
->seq_ptr
, 0);
248 * An abort isn't needed.
250 static void fc_fcp_retry_cmd(struct fc_fcp_pkt
*fsp
)
253 fsp
->lp
->tt
.exch_done(fsp
->seq_ptr
);
257 fsp
->state
&= ~FC_SRB_ABORT_PENDING
;
259 fsp
->status_code
= FC_ERROR
;
260 fc_fcp_complete_locked(fsp
);
264 * fc_fcp_ddp_setup - calls to LLD's ddp_setup to set up DDP
265 * transfer for a read I/O indicated by the fc_fcp_pkt.
266 * @fsp: ptr to the fc_fcp_pkt
268 * This is called in exch_seq_send() when we have a newly allocated
269 * exchange with a valid exchange id to setup ddp.
273 void fc_fcp_ddp_setup(struct fc_fcp_pkt
*fsp
, u16 xid
)
281 if ((fsp
->req_flags
& FC_SRB_READ
) &&
282 (lp
->lro_enabled
) && (lp
->tt
.ddp_setup
)) {
283 if (lp
->tt
.ddp_setup(lp
, xid
, scsi_sglist(fsp
->cmd
),
284 scsi_sg_count(fsp
->cmd
)))
288 EXPORT_SYMBOL(fc_fcp_ddp_setup
);
291 * fc_fcp_ddp_done - calls to LLD's ddp_done to release any
292 * DDP related resources for this I/O if it is initialized
294 * @fsp: ptr to the fc_fcp_pkt
298 static void fc_fcp_ddp_done(struct fc_fcp_pkt
*fsp
)
306 if (fsp
->xfer_ddp
&& lp
->tt
.ddp_done
) {
307 fsp
->xfer_len
= lp
->tt
.ddp_done(lp
, fsp
->xfer_ddp
);
314 * Receive SCSI data from target.
315 * Called after receiving solicited data.
317 static void fc_fcp_recv_data(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
319 struct scsi_cmnd
*sc
= fsp
->cmd
;
320 struct fc_lport
*lp
= fsp
->lp
;
321 struct fcoe_dev_stats
*stats
;
322 struct fc_frame_header
*fh
;
329 struct scatterlist
*sg
;
332 fh
= fc_frame_header_get(fp
);
333 offset
= ntohl(fh
->fh_parm_offset
);
334 start_offset
= offset
;
335 len
= fr_len(fp
) - sizeof(*fh
);
336 buf
= fc_frame_payload_get(fp
, 0);
338 /* if this I/O is ddped, update xfer len */
339 fc_fcp_ddp_done(fsp
);
341 if (offset
+ len
> fsp
->data_len
) {
342 /* this should never happen */
343 if ((fr_flags(fp
) & FCPHF_CRC_UNCHECKED
) &&
344 fc_frame_crc_check(fp
))
346 FC_FCP_DBG(fsp
, "data received past end. len %zx offset %zx "
347 "data_len %x\n", len
, offset
, fsp
->data_len
);
348 fc_fcp_retry_cmd(fsp
);
351 if (offset
!= fsp
->xfer_len
)
352 fsp
->state
|= FC_SRB_DISCONTIG
;
355 if (fr_flags(fp
) & FCPHF_CRC_UNCHECKED
)
356 crc
= crc32(~0, (u8
*) fh
, sizeof(*fh
));
358 sg
= scsi_sglist(sc
);
361 while (remaining
> 0 && sg
) {
366 if (offset
>= sg
->length
) {
367 offset
-= sg
->length
;
371 sg_bytes
= min(remaining
, sg
->length
- offset
);
374 * The scatterlist item may be bigger than PAGE_SIZE,
375 * but we are limited to mapping PAGE_SIZE at a time.
377 off
= offset
+ sg
->offset
;
378 sg_bytes
= min(sg_bytes
, (size_t)
379 (PAGE_SIZE
- (off
& ~PAGE_MASK
)));
380 page_addr
= kmap_atomic(sg_page(sg
) + (off
>> PAGE_SHIFT
),
383 break; /* XXX panic? */
385 if (fr_flags(fp
) & FCPHF_CRC_UNCHECKED
)
386 crc
= crc32(crc
, buf
, sg_bytes
);
387 memcpy((char *)page_addr
+ (off
& ~PAGE_MASK
), buf
,
390 kunmap_atomic(page_addr
, KM_SOFTIRQ0
);
393 remaining
-= sg_bytes
;
394 copy_len
+= sg_bytes
;
397 if (fr_flags(fp
) & FCPHF_CRC_UNCHECKED
) {
398 buf
= fc_frame_payload_get(fp
, 0);
400 crc
= crc32(crc
, buf
+ len
, 4 - (len
% 4));
401 len
+= 4 - (len
% 4);
404 if (~crc
!= le32_to_cpu(fr_crc(fp
))) {
406 stats
= fc_lport_get_stats(lp
);
407 stats
->ErrorFrames
++;
408 /* FIXME - per cpu count, not total count! */
409 if (stats
->InvalidCRCCount
++ < 5)
410 printk(KERN_WARNING
"libfc: CRC error on data "
411 "frame for port (%6x)\n",
412 fc_host_port_id(lp
->host
));
414 * Assume the frame is total garbage.
415 * We may have copied it over the good part
417 * If so, we need to retry the entire operation.
418 * Otherwise, ignore it.
420 if (fsp
->state
& FC_SRB_DISCONTIG
)
421 fc_fcp_retry_cmd(fsp
);
426 if (fsp
->xfer_contig_end
== start_offset
)
427 fsp
->xfer_contig_end
+= copy_len
;
428 fsp
->xfer_len
+= copy_len
;
431 * In the very rare event that this data arrived after the response
432 * and completes the transfer, call the completion handler.
434 if (unlikely(fsp
->state
& FC_SRB_RCV_STATUS
) &&
435 fsp
->xfer_len
== fsp
->data_len
- fsp
->scsi_resid
)
436 fc_fcp_complete_locked(fsp
);
440 * fc_fcp_send_data() - Send SCSI data to target.
441 * @fsp: ptr to fc_fcp_pkt
442 * @sp: ptr to this sequence
443 * @offset: starting offset for this data request
444 * @seq_blen: the burst length for this data request
446 * Called after receiving a Transfer Ready data descriptor.
447 * if LLD is capable of seq offload then send down seq_blen
448 * size of data in single frame, otherwise send multiple FC
449 * frames of max FC frame payload supported by target port.
451 * Returns : 0 for success.
453 static int fc_fcp_send_data(struct fc_fcp_pkt
*fsp
, struct fc_seq
*seq
,
454 size_t offset
, size_t seq_blen
)
457 struct scsi_cmnd
*sc
;
458 struct scatterlist
*sg
;
459 struct fc_frame
*fp
= NULL
;
460 struct fc_lport
*lp
= fsp
->lp
;
465 size_t frame_offset
, fh_parm_offset
;
469 int using_sg
= lp
->sg_supp
;
472 WARN_ON(seq_blen
<= 0);
473 if (unlikely(offset
+ seq_blen
> fsp
->data_len
)) {
474 /* this should never happen */
475 FC_FCP_DBG(fsp
, "xfer-ready past end. seq_blen %zx "
476 "offset %zx\n", seq_blen
, offset
);
477 fc_fcp_send_abort(fsp
);
479 } else if (offset
!= fsp
->xfer_len
) {
480 /* Out of Order Data Request - no problem, but unexpected. */
481 FC_FCP_DBG(fsp
, "xfer-ready non-contiguous. "
482 "seq_blen %zx offset %zx\n", seq_blen
, offset
);
486 * if LLD is capable of seq_offload then set transport
487 * burst length (t_blen) to seq_blen, otherwise set t_blen
488 * to max FC frame payload previously set in fsp->max_payload.
490 t_blen
= fsp
->max_payload
;
491 if (lp
->seq_offload
) {
492 t_blen
= min(seq_blen
, (size_t)lp
->lso_max
);
493 FC_FCP_DBG(fsp
, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
494 fsp
, seq_blen
, lp
->lso_max
, t_blen
);
497 WARN_ON(t_blen
< FC_MIN_MAX_PAYLOAD
);
499 t_blen
&= ~(512 - 1); /* round down to block size */
500 WARN_ON(t_blen
< FC_MIN_MAX_PAYLOAD
); /* won't go below 256 */
503 remaining
= seq_blen
;
504 fh_parm_offset
= frame_offset
= offset
;
506 seq
= lp
->tt
.seq_start_next(seq
);
507 f_ctl
= FC_FC_REL_OFF
;
511 * If a get_page()/put_page() will fail, don't use sg lists
512 * in the fc_frame structure.
514 * The put_page() may be long after the I/O has completed
515 * in the case of FCoE, since the network driver does it
516 * via free_skb(). See the test in free_pages_check().
518 * Test this case with 'dd </dev/zero >/dev/st0 bs=64k'.
521 for (sg
= scsi_sglist(sc
); sg
; sg
= sg_next(sg
)) {
522 if (page_count(sg_page(sg
)) == 0 ||
523 (sg_page(sg
)->flags
& (1 << PG_lru
|
537 sg
= scsi_sglist(sc
);
539 while (remaining
> 0 && sg
) {
540 if (offset
>= sg
->length
) {
541 offset
-= sg
->length
;
546 tlen
= min(t_blen
, remaining
);
549 * TODO. Temporary workaround. fc_seq_send() can't
550 * handle odd lengths in non-linear skbs.
551 * This will be the final fragment only.
556 fp
= _fc_frame_alloc(lp
, 0);
560 fp
= fc_frame_alloc(lp
, tlen
);
564 data
= (void *)(fr_hdr(fp
)) +
565 sizeof(struct fc_frame_header
);
567 fh_parm_offset
= frame_offset
;
568 fr_max_payload(fp
) = fsp
->max_payload
;
570 sg_bytes
= min(tlen
, sg
->length
- offset
);
572 WARN_ON(skb_shinfo(fp_skb(fp
))->nr_frags
>
574 get_page(sg_page(sg
));
575 skb_fill_page_desc(fp_skb(fp
),
576 skb_shinfo(fp_skb(fp
))->nr_frags
,
577 sg_page(sg
), sg
->offset
+ offset
,
579 fp_skb(fp
)->data_len
+= sg_bytes
;
580 fr_len(fp
) += sg_bytes
;
581 fp_skb(fp
)->truesize
+= PAGE_SIZE
;
583 size_t off
= offset
+ sg
->offset
;
586 * The scatterlist item may be bigger than PAGE_SIZE,
587 * but we must not cross pages inside the kmap.
589 sg_bytes
= min(sg_bytes
, (size_t) (PAGE_SIZE
-
590 (off
& ~PAGE_MASK
)));
591 page_addr
= kmap_atomic(sg_page(sg
) +
594 memcpy(data
, (char *)page_addr
+ (off
& ~PAGE_MASK
),
596 kunmap_atomic(page_addr
, KM_SOFTIRQ0
);
600 frame_offset
+= sg_bytes
;
602 remaining
-= sg_bytes
;
608 * Send sequence with transfer sequence initiative in case
609 * this is last FCP frame of the sequence.
612 f_ctl
|= FC_FC_SEQ_INIT
| FC_FC_END_SEQ
;
614 ep
= fc_seq_exch(seq
);
615 fc_fill_fc_hdr(fp
, FC_RCTL_DD_SOL_DATA
, ep
->did
, ep
->sid
,
616 FC_TYPE_FCP
, f_ctl
, fh_parm_offset
);
619 * send fragment using for a sequence.
621 error
= lp
->tt
.seq_send(lp
, seq
, fp
);
623 WARN_ON(1); /* send error should be rare */
624 fc_fcp_retry_cmd(fsp
);
629 fsp
->xfer_len
+= seq_blen
; /* premature count? */
633 static void fc_fcp_abts_resp(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
636 struct fc_ba_rjt
*brp
;
637 struct fc_frame_header
*fh
;
639 fh
= fc_frame_header_get(fp
);
640 switch (fh
->fh_r_ctl
) {
644 brp
= fc_frame_payload_get(fp
, sizeof(*brp
));
645 if (brp
&& brp
->br_reason
== FC_BA_RJT_LOG_ERR
)
650 * we will let the command timeout
651 * and scsi-ml recover in this case,
652 * therefore cleared the ba_done flag.
658 fsp
->state
|= FC_SRB_ABORTED
;
659 fsp
->state
&= ~FC_SRB_ABORT_PENDING
;
661 if (fsp
->wait_for_comp
)
662 complete(&fsp
->tm_done
);
664 fc_fcp_complete_locked(fsp
);
669 * fc_fcp_reduce_can_queue() - drop can_queue
670 * @lp: lport to drop queueing for
672 * If we are getting memory allocation failures, then we may
673 * be trying to execute too many commands. We let the running
674 * commands complete or timeout, then try again with a reduced
675 * can_queue. Eventually we will hit the point where we run
676 * on all reserved structs.
678 static void fc_fcp_reduce_can_queue(struct fc_lport
*lp
)
680 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lp
);
684 spin_lock_irqsave(lp
->host
->host_lock
, flags
);
689 can_queue
= lp
->host
->can_queue
;
693 lp
->host
->can_queue
= can_queue
;
694 shost_printk(KERN_ERR
, lp
->host
, "libfc: Could not allocate frame.\n"
695 "Reducing can_queue to %d.\n", can_queue
);
697 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
701 * fc_fcp_recv() - Reveive FCP frames
702 * @seq: The sequence the frame is on
704 * @arg: The related FCP packet
707 * Context : called from Soft IRQ context
708 * can not called holding list lock
710 static void fc_fcp_recv(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
712 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)arg
;
713 struct fc_lport
*lport
= fsp
->lp
;
714 struct fc_frame_header
*fh
;
715 struct fcp_txrdy
*dd
;
722 fh
= fc_frame_header_get(fp
);
723 r_ctl
= fh
->fh_r_ctl
;
725 if (!(lport
->state
& LPORT_ST_READY
))
727 if (fc_fcp_lock_pkt(fsp
))
729 fsp
->last_pkt_time
= jiffies
;
731 if (fh
->fh_type
== FC_TYPE_BLS
) {
732 fc_fcp_abts_resp(fsp
, fp
);
736 if (fsp
->state
& (FC_SRB_ABORTED
| FC_SRB_ABORT_PENDING
))
739 if (r_ctl
== FC_RCTL_DD_DATA_DESC
) {
741 * received XFER RDY from the target
742 * need to send data to the target
744 WARN_ON(fr_flags(fp
) & FCPHF_CRC_UNCHECKED
);
745 dd
= fc_frame_payload_get(fp
, sizeof(*dd
));
748 rc
= fc_fcp_send_data(fsp
, seq
,
749 (size_t) ntohl(dd
->ft_data_ro
),
750 (size_t) ntohl(dd
->ft_burst_len
));
752 seq
->rec_data
= fsp
->xfer_len
;
753 else if (rc
== -ENOMEM
)
754 fsp
->state
|= FC_SRB_NOMEM
;
755 } else if (r_ctl
== FC_RCTL_DD_SOL_DATA
) {
757 * received a DATA frame
758 * next we will copy the data to the system buffer
760 WARN_ON(fr_len(fp
) < sizeof(*fh
)); /* len may be 0 */
761 fc_fcp_recv_data(fsp
, fp
);
762 seq
->rec_data
= fsp
->xfer_contig_end
;
763 } else if (r_ctl
== FC_RCTL_DD_CMD_STATUS
) {
764 WARN_ON(fr_flags(fp
) & FCPHF_CRC_UNCHECKED
);
766 fc_fcp_resp(fsp
, fp
);
768 FC_FCP_DBG(fsp
, "unexpected frame. r_ctl %x\n", r_ctl
);
771 fc_fcp_unlock_pkt(fsp
);
776 fc_fcp_error(fsp
, fp
);
777 else if (rc
== -ENOMEM
)
778 fc_fcp_reduce_can_queue(lport
);
781 static void fc_fcp_resp(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
783 struct fc_frame_header
*fh
;
784 struct fcp_resp
*fc_rp
;
785 struct fcp_resp_ext
*rp_ex
;
786 struct fcp_resp_rsp_info
*fc_rp_info
;
794 fh
= (struct fc_frame_header
*)fr_hdr(fp
);
795 if (unlikely(plen
< sizeof(*fh
) + sizeof(*fc_rp
)))
798 fc_rp
= (struct fcp_resp
*)(fh
+ 1);
799 fsp
->cdb_status
= fc_rp
->fr_status
;
800 flags
= fc_rp
->fr_flags
;
801 fsp
->scsi_comp_flags
= flags
;
802 expected_len
= fsp
->data_len
;
804 /* if ddp, update xfer len */
805 fc_fcp_ddp_done(fsp
);
807 if (unlikely((flags
& ~FCP_CONF_REQ
) || fc_rp
->fr_status
)) {
808 rp_ex
= (void *)(fc_rp
+ 1);
809 if (flags
& (FCP_RSP_LEN_VAL
| FCP_SNS_LEN_VAL
)) {
810 if (plen
< sizeof(*fc_rp
) + sizeof(*rp_ex
))
812 fc_rp_info
= (struct fcp_resp_rsp_info
*)(rp_ex
+ 1);
813 if (flags
& FCP_RSP_LEN_VAL
) {
814 respl
= ntohl(rp_ex
->fr_rsp_len
);
815 if (respl
!= sizeof(*fc_rp_info
))
817 if (fsp
->wait_for_comp
) {
818 /* Abuse cdb_status for rsp code */
819 fsp
->cdb_status
= fc_rp_info
->rsp_code
;
820 complete(&fsp
->tm_done
);
822 * tmfs will not have any scsi cmd so
829 if (flags
& FCP_SNS_LEN_VAL
) {
830 snsl
= ntohl(rp_ex
->fr_sns_len
);
831 if (snsl
> SCSI_SENSE_BUFFERSIZE
)
832 snsl
= SCSI_SENSE_BUFFERSIZE
;
833 memcpy(fsp
->cmd
->sense_buffer
,
834 (char *)fc_rp_info
+ respl
, snsl
);
837 if (flags
& (FCP_RESID_UNDER
| FCP_RESID_OVER
)) {
838 if (plen
< sizeof(*fc_rp
) + sizeof(rp_ex
->fr_resid
))
840 if (flags
& FCP_RESID_UNDER
) {
841 fsp
->scsi_resid
= ntohl(rp_ex
->fr_resid
);
843 * The cmnd->underflow is the minimum number of
844 * bytes that must be transfered for this
845 * command. Provided a sense condition is not
846 * present, make sure the actual amount
847 * transferred is at least the underflow value
850 if (!(flags
& FCP_SNS_LEN_VAL
) &&
851 (fc_rp
->fr_status
== 0) &&
852 (scsi_bufflen(fsp
->cmd
) -
853 fsp
->scsi_resid
) < fsp
->cmd
->underflow
)
855 expected_len
-= fsp
->scsi_resid
;
857 fsp
->status_code
= FC_ERROR
;
861 fsp
->state
|= FC_SRB_RCV_STATUS
;
864 * Check for missing or extra data frames.
866 if (unlikely(fsp
->xfer_len
!= expected_len
)) {
867 if (fsp
->xfer_len
< expected_len
) {
869 * Some data may be queued locally,
870 * Wait a at least one jiffy to see if it is delivered.
871 * If this expires without data, we may do SRR.
873 fc_fcp_timer_set(fsp
, 2);
876 fsp
->status_code
= FC_DATA_OVRRUN
;
877 FC_FCP_DBG(fsp
, "tgt %6x xfer len %zx greater than expected, "
878 "len %x, data len %x\n",
880 fsp
->xfer_len
, expected_len
, fsp
->data_len
);
882 fc_fcp_complete_locked(fsp
);
886 FC_FCP_DBG(fsp
, "short FCP response. flags 0x%x len %u respl %u "
887 "snsl %u\n", flags
, fr_len(fp
), respl
, snsl
);
889 fsp
->status_code
= FC_ERROR
;
890 fc_fcp_complete_locked(fsp
);
894 * fc_fcp_complete_locked() - complete processing of a fcp packet
897 * This function may sleep if a timer is pending. The packet lock must be
898 * held, and the host lock must not be held.
900 static void fc_fcp_complete_locked(struct fc_fcp_pkt
*fsp
)
902 struct fc_lport
*lp
= fsp
->lp
;
907 if (fsp
->state
& FC_SRB_ABORT_PENDING
)
910 if (fsp
->state
& FC_SRB_ABORTED
) {
911 if (!fsp
->status_code
)
912 fsp
->status_code
= FC_CMD_ABORTED
;
915 * Test for transport underrun, independent of response
918 if (fsp
->xfer_len
< fsp
->data_len
&& !fsp
->io_status
&&
919 (!(fsp
->scsi_comp_flags
& FCP_RESID_UNDER
) ||
920 fsp
->xfer_len
< fsp
->data_len
- fsp
->scsi_resid
)) {
921 fsp
->status_code
= FC_DATA_UNDRUN
;
929 if (unlikely(fsp
->scsi_comp_flags
& FCP_CONF_REQ
)) {
930 struct fc_frame
*conf_frame
;
933 csp
= lp
->tt
.seq_start_next(seq
);
934 conf_frame
= fc_frame_alloc(fsp
->lp
, 0);
936 f_ctl
= FC_FC_SEQ_INIT
;
937 f_ctl
|= FC_FC_LAST_SEQ
| FC_FC_END_SEQ
;
938 ep
= fc_seq_exch(seq
);
939 fc_fill_fc_hdr(conf_frame
, FC_RCTL_DD_SOL_CTL
,
941 FC_TYPE_FCP
, f_ctl
, 0);
942 lp
->tt
.seq_send(lp
, csp
, conf_frame
);
945 lp
->tt
.exch_done(seq
);
950 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt
*fsp
, int error
)
952 struct fc_lport
*lp
= fsp
->lp
;
955 lp
->tt
.exch_done(fsp
->seq_ptr
);
958 fsp
->status_code
= error
;
962 * fc_fcp_cleanup_each_cmd() - Cleanup active commads
966 * @error: fsp status code
968 * If lun or id is -1, they are ignored.
970 static void fc_fcp_cleanup_each_cmd(struct fc_lport
*lp
, unsigned int id
,
971 unsigned int lun
, int error
)
973 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lp
);
974 struct fc_fcp_pkt
*fsp
;
975 struct scsi_cmnd
*sc_cmd
;
978 spin_lock_irqsave(lp
->host
->host_lock
, flags
);
980 list_for_each_entry(fsp
, &si
->scsi_pkt_queue
, list
) {
982 if (id
!= -1 && scmd_id(sc_cmd
) != id
)
985 if (lun
!= -1 && sc_cmd
->device
->lun
!= lun
)
988 fc_fcp_pkt_hold(fsp
);
989 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
991 if (!fc_fcp_lock_pkt(fsp
)) {
992 fc_fcp_cleanup_cmd(fsp
, error
);
994 fc_fcp_unlock_pkt(fsp
);
997 fc_fcp_pkt_release(fsp
);
998 spin_lock_irqsave(lp
->host
->host_lock
, flags
);
1000 * while we dropped the lock multiple pkts could
1001 * have been released, so we have to start over.
1005 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
1008 static void fc_fcp_abort_io(struct fc_lport
*lp
)
1010 fc_fcp_cleanup_each_cmd(lp
, -1, -1, FC_HRD_ERROR
);
1014 * fc_fcp_pkt_send() - send a fcp packet to the lower level.
1018 * This is called by upper layer protocol.
1019 * Return : zero for success and -1 for failure
1020 * Context : called from queuecommand which can be called from process
1022 * Locks : called with the host lock and irqs disabled.
1024 static int fc_fcp_pkt_send(struct fc_lport
*lp
, struct fc_fcp_pkt
*fsp
)
1026 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lp
);
1029 fsp
->cmd
->SCp
.ptr
= (char *)fsp
;
1030 fsp
->cdb_cmd
.fc_dl
= htonl(fsp
->data_len
);
1031 fsp
->cdb_cmd
.fc_flags
= fsp
->req_flags
& ~FCP_CFL_LEN_MASK
;
1033 int_to_scsilun(fsp
->cmd
->device
->lun
,
1034 (struct scsi_lun
*)fsp
->cdb_cmd
.fc_lun
);
1035 memcpy(fsp
->cdb_cmd
.fc_cdb
, fsp
->cmd
->cmnd
, fsp
->cmd
->cmd_len
);
1036 list_add_tail(&fsp
->list
, &si
->scsi_pkt_queue
);
1038 spin_unlock_irq(lp
->host
->host_lock
);
1039 rc
= lp
->tt
.fcp_cmd_send(lp
, fsp
, fc_fcp_recv
);
1040 spin_lock_irq(lp
->host
->host_lock
);
1042 list_del(&fsp
->list
);
1047 static int fc_fcp_cmd_send(struct fc_lport
*lp
, struct fc_fcp_pkt
*fsp
,
1048 void (*resp
)(struct fc_seq
*,
1049 struct fc_frame
*fp
,
1052 struct fc_frame
*fp
;
1054 struct fc_rport
*rport
;
1055 struct fc_rport_libfc_priv
*rp
;
1056 const size_t len
= sizeof(fsp
->cdb_cmd
);
1059 if (fc_fcp_lock_pkt(fsp
))
1062 fp
= fc_frame_alloc(lp
, sizeof(fsp
->cdb_cmd
));
1068 memcpy(fc_frame_payload_get(fp
, len
), &fsp
->cdb_cmd
, len
);
1071 fsp
->max_payload
= rport
->maxframe_size
;
1072 rp
= rport
->dd_data
;
1074 fc_fill_fc_hdr(fp
, FC_RCTL_DD_UNSOL_CMD
, rport
->port_id
,
1075 fc_host_port_id(rp
->local_port
->host
), FC_TYPE_FCP
,
1076 FC_FC_FIRST_SEQ
| FC_FC_END_SEQ
| FC_FC_SEQ_INIT
, 0);
1078 seq
= lp
->tt
.exch_seq_send(lp
, fp
, resp
, fc_fcp_pkt_destroy
, fsp
, 0);
1084 fsp
->last_pkt_time
= jiffies
;
1086 fc_fcp_pkt_hold(fsp
); /* hold for fc_fcp_pkt_destroy */
1088 setup_timer(&fsp
->timer
, fc_fcp_timeout
, (unsigned long)fsp
);
1089 fc_fcp_timer_set(fsp
,
1090 (fsp
->tgt_flags
& FC_RP_FLAGS_REC_SUPPORTED
) ?
1091 FC_SCSI_REC_TOV
: FC_SCSI_ER_TIMEOUT
);
1093 fc_fcp_unlock_pkt(fsp
);
1098 * transport error handler
1100 static void fc_fcp_error(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
1102 int error
= PTR_ERR(fp
);
1104 if (fc_fcp_lock_pkt(fsp
))
1107 if (error
== -FC_EX_CLOSED
) {
1108 fc_fcp_retry_cmd(fsp
);
1113 * clear abort pending, because the lower layer
1114 * decided to force completion.
1116 fsp
->state
&= ~FC_SRB_ABORT_PENDING
;
1117 fsp
->status_code
= FC_CMD_PLOGO
;
1118 fc_fcp_complete_locked(fsp
);
1120 fc_fcp_unlock_pkt(fsp
);
1124 * Scsi abort handler- calls to send an abort
1125 * and then wait for abort completion
1127 static int fc_fcp_pkt_abort(struct fc_lport
*lp
, struct fc_fcp_pkt
*fsp
)
1131 if (fc_fcp_send_abort(fsp
))
1134 init_completion(&fsp
->tm_done
);
1135 fsp
->wait_for_comp
= 1;
1137 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1138 rc
= wait_for_completion_timeout(&fsp
->tm_done
, FC_SCSI_TM_TOV
);
1139 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1140 fsp
->wait_for_comp
= 0;
1143 FC_FCP_DBG(fsp
, "target abort cmd failed\n");
1145 } else if (fsp
->state
& FC_SRB_ABORTED
) {
1146 FC_FCP_DBG(fsp
, "target abort cmd passed\n");
1148 fc_fcp_complete_locked(fsp
);
1155 * Retry LUN reset after resource allocation failed.
1157 static void fc_lun_reset_send(unsigned long data
)
1159 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)data
;
1160 struct fc_lport
*lp
= fsp
->lp
;
1161 if (lp
->tt
.fcp_cmd_send(lp
, fsp
, fc_tm_done
)) {
1162 if (fsp
->recov_retry
++ >= FC_MAX_RECOV_RETRY
)
1164 if (fc_fcp_lock_pkt(fsp
))
1166 setup_timer(&fsp
->timer
, fc_lun_reset_send
, (unsigned long)fsp
);
1167 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1168 fc_fcp_unlock_pkt(fsp
);
1173 * Scsi device reset handler- send a LUN RESET to the device
1174 * and wait for reset reply
1176 static int fc_lun_reset(struct fc_lport
*lp
, struct fc_fcp_pkt
*fsp
,
1177 unsigned int id
, unsigned int lun
)
1181 fsp
->cdb_cmd
.fc_dl
= htonl(fsp
->data_len
);
1182 fsp
->cdb_cmd
.fc_tm_flags
= FCP_TMF_LUN_RESET
;
1183 int_to_scsilun(lun
, (struct scsi_lun
*)fsp
->cdb_cmd
.fc_lun
);
1185 fsp
->wait_for_comp
= 1;
1186 init_completion(&fsp
->tm_done
);
1188 fc_lun_reset_send((unsigned long)fsp
);
1191 * wait for completion of reset
1192 * after that make sure all commands are terminated
1194 rc
= wait_for_completion_timeout(&fsp
->tm_done
, FC_SCSI_TM_TOV
);
1196 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1197 fsp
->state
|= FC_SRB_COMPL
;
1198 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1200 del_timer_sync(&fsp
->timer
);
1202 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1204 lp
->tt
.exch_done(fsp
->seq_ptr
);
1205 fsp
->seq_ptr
= NULL
;
1207 fsp
->wait_for_comp
= 0;
1208 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1211 FC_SCSI_DBG(lp
, "lun reset failed\n");
1215 /* cdb_status holds the tmf's rsp code */
1216 if (fsp
->cdb_status
!= FCP_TMF_CMPL
)
1219 FC_SCSI_DBG(lp
, "lun reset to lun %u completed\n", lun
);
1220 fc_fcp_cleanup_each_cmd(lp
, id
, lun
, FC_CMD_ABORTED
);
1225 * Task Managment response handler
1227 static void fc_tm_done(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
1229 struct fc_fcp_pkt
*fsp
= arg
;
1230 struct fc_frame_header
*fh
;
1234 * If there is an error just let it timeout or wait
1235 * for TMF to be aborted if it timedout.
1237 * scsi-eh will escalate for when either happens.
1242 if (fc_fcp_lock_pkt(fsp
))
1246 * raced with eh timeout handler.
1248 if (!fsp
->seq_ptr
|| !fsp
->wait_for_comp
) {
1249 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1253 fh
= fc_frame_header_get(fp
);
1254 if (fh
->fh_type
!= FC_TYPE_BLS
)
1255 fc_fcp_resp(fsp
, fp
);
1256 fsp
->seq_ptr
= NULL
;
1257 fsp
->lp
->tt
.exch_done(seq
);
1259 fc_fcp_unlock_pkt(fsp
);
1262 static void fc_fcp_cleanup(struct fc_lport
*lp
)
1264 fc_fcp_cleanup_each_cmd(lp
, -1, -1, FC_ERROR
);
1268 * fc_fcp_timeout: called by OS timer function.
1270 * The timer has been inactivated and must be reactivated if desired
1271 * using fc_fcp_timer_set().
1275 * If REC is supported, just issue it, and return. The REC exchange will
1276 * complete or time out, and recovery can continue at that point.
1278 * Otherwise, if the response has been received without all the data,
1279 * it has been ER_TIMEOUT since the response was received.
1281 * If the response has not been received,
1282 * we see if data was received recently. If it has been, we continue waiting,
1283 * otherwise, we abort the command.
1285 static void fc_fcp_timeout(unsigned long data
)
1287 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)data
;
1288 struct fc_rport
*rport
= fsp
->rport
;
1289 struct fc_rport_libfc_priv
*rp
= rport
->dd_data
;
1291 if (fc_fcp_lock_pkt(fsp
))
1294 if (fsp
->cdb_cmd
.fc_tm_flags
)
1297 fsp
->state
|= FC_SRB_FCP_PROCESSING_TMO
;
1299 if (rp
->flags
& FC_RP_FLAGS_REC_SUPPORTED
)
1301 else if (time_after_eq(fsp
->last_pkt_time
+ (FC_SCSI_ER_TIMEOUT
/ 2),
1303 fc_fcp_timer_set(fsp
, FC_SCSI_ER_TIMEOUT
);
1304 else if (fsp
->state
& FC_SRB_RCV_STATUS
)
1305 fc_fcp_complete_locked(fsp
);
1307 fc_timeout_error(fsp
);
1308 fsp
->state
&= ~FC_SRB_FCP_PROCESSING_TMO
;
1310 fc_fcp_unlock_pkt(fsp
);
1314 * Send a REC ELS request
1316 static void fc_fcp_rec(struct fc_fcp_pkt
*fsp
)
1318 struct fc_lport
*lp
;
1319 struct fc_frame
*fp
;
1320 struct fc_rport
*rport
;
1321 struct fc_rport_libfc_priv
*rp
;
1325 rp
= rport
->dd_data
;
1326 if (!fsp
->seq_ptr
|| rp
->rp_state
!= RPORT_ST_READY
) {
1327 fsp
->status_code
= FC_HRD_ERROR
;
1329 fc_fcp_complete_locked(fsp
);
1332 fp
= fc_frame_alloc(lp
, sizeof(struct fc_els_rec
));
1336 fr_seq(fp
) = fsp
->seq_ptr
;
1337 fc_fill_fc_hdr(fp
, FC_RCTL_ELS_REQ
, rport
->port_id
,
1338 fc_host_port_id(rp
->local_port
->host
), FC_TYPE_ELS
,
1339 FC_FC_FIRST_SEQ
| FC_FC_END_SEQ
| FC_FC_SEQ_INIT
, 0);
1340 if (lp
->tt
.elsct_send(lp
, rport
, fp
, ELS_REC
, fc_fcp_rec_resp
,
1341 fsp
, jiffies_to_msecs(FC_SCSI_REC_TOV
))) {
1342 fc_fcp_pkt_hold(fsp
); /* hold while REC outstanding */
1347 if (fsp
->recov_retry
++ < FC_MAX_RECOV_RETRY
)
1348 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1350 fc_timeout_error(fsp
);
1354 * Receive handler for REC ELS frame
1355 * if it is a reject then let the scsi layer to handle
1356 * the timeout. if it is a LS_ACC then if the io was not completed
1357 * then set the timeout and return otherwise complete the exchange
1358 * and tell the scsi layer to restart the I/O.
1360 static void fc_fcp_rec_resp(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
1362 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)arg
;
1363 struct fc_els_rec_acc
*recp
;
1364 struct fc_els_ls_rjt
*rjt
;
1368 enum dma_data_direction data_dir
;
1370 struct fc_rport_libfc_priv
*rp
;
1373 fc_fcp_rec_error(fsp
, fp
);
1377 if (fc_fcp_lock_pkt(fsp
))
1380 fsp
->recov_retry
= 0;
1381 opcode
= fc_frame_payload_op(fp
);
1382 if (opcode
== ELS_LS_RJT
) {
1383 rjt
= fc_frame_payload_get(fp
, sizeof(*rjt
));
1384 switch (rjt
->er_reason
) {
1386 FC_FCP_DBG(fsp
, "device %x unexpected REC reject "
1387 "reason %d expl %d\n",
1388 fsp
->rport
->port_id
, rjt
->er_reason
,
1392 FC_FCP_DBG(fsp
, "device does not support REC\n");
1393 rp
= fsp
->rport
->dd_data
;
1395 * if we do not spport RECs or got some bogus
1396 * reason then resetup timer so we check for
1399 rp
->flags
&= ~FC_RP_FLAGS_REC_SUPPORTED
;
1400 fc_fcp_timer_set(fsp
, FC_SCSI_ER_TIMEOUT
);
1405 * If no data transfer, the command frame got dropped
1406 * so we just retry. If data was transferred, we
1407 * lost the response but the target has no record,
1408 * so we abort and retry.
1410 if (rjt
->er_explan
== ELS_EXPL_OXID_RXID
&&
1411 fsp
->xfer_len
== 0) {
1412 fc_fcp_retry_cmd(fsp
);
1415 fc_timeout_error(fsp
);
1418 } else if (opcode
== ELS_LS_ACC
) {
1419 if (fsp
->state
& FC_SRB_ABORTED
)
1422 data_dir
= fsp
->cmd
->sc_data_direction
;
1423 recp
= fc_frame_payload_get(fp
, sizeof(*recp
));
1424 offset
= ntohl(recp
->reca_fc4value
);
1425 e_stat
= ntohl(recp
->reca_e_stat
);
1427 if (e_stat
& ESB_ST_COMPLETE
) {
1430 * The exchange is complete.
1432 * For output, we must've lost the response.
1433 * For input, all data must've been sent.
1434 * We lost may have lost the response
1435 * (and a confirmation was requested) and maybe
1438 * If all data received, send SRR
1439 * asking for response. If partial data received,
1440 * or gaps, SRR requests data at start of gap.
1441 * Recovery via SRR relies on in-order-delivery.
1443 if (data_dir
== DMA_TO_DEVICE
) {
1444 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1445 } else if (fsp
->xfer_contig_end
== offset
) {
1446 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1448 offset
= fsp
->xfer_contig_end
;
1449 r_ctl
= FC_RCTL_DD_SOL_DATA
;
1451 fc_fcp_srr(fsp
, r_ctl
, offset
);
1452 } else if (e_stat
& ESB_ST_SEQ_INIT
) {
1455 * The remote port has the initiative, so just
1456 * keep waiting for it to complete.
1458 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1462 * The exchange is incomplete, we have seq. initiative.
1463 * Lost response with requested confirmation,
1464 * lost confirmation, lost transfer ready or
1467 * For output, if not all data was received, ask
1468 * for transfer ready to be repeated.
1470 * If we received or sent all the data, send SRR to
1473 * If we lost a response, we may have lost some read
1476 r_ctl
= FC_RCTL_DD_SOL_DATA
;
1477 if (data_dir
== DMA_TO_DEVICE
) {
1478 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1479 if (offset
< fsp
->data_len
)
1480 r_ctl
= FC_RCTL_DD_DATA_DESC
;
1481 } else if (offset
== fsp
->xfer_contig_end
) {
1482 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1483 } else if (fsp
->xfer_contig_end
< offset
) {
1484 offset
= fsp
->xfer_contig_end
;
1486 fc_fcp_srr(fsp
, r_ctl
, offset
);
1490 fc_fcp_unlock_pkt(fsp
);
1492 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding REC */
1497 * Handle error response or timeout for REC exchange.
1499 static void fc_fcp_rec_error(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
1501 int error
= PTR_ERR(fp
);
1503 if (fc_fcp_lock_pkt(fsp
))
1508 fc_fcp_retry_cmd(fsp
);
1512 FC_FCP_DBG(fsp
, "REC %p fid %x error unexpected error %d\n",
1513 fsp
, fsp
->rport
->port_id
, error
);
1514 fsp
->status_code
= FC_CMD_PLOGO
;
1517 case -FC_EX_TIMEOUT
:
1519 * Assume REC or LS_ACC was lost.
1520 * The exchange manager will have aborted REC, so retry.
1522 FC_FCP_DBG(fsp
, "REC fid %x error error %d retry %d/%d\n",
1523 fsp
->rport
->port_id
, error
, fsp
->recov_retry
,
1524 FC_MAX_RECOV_RETRY
);
1525 if (fsp
->recov_retry
++ < FC_MAX_RECOV_RETRY
)
1528 fc_timeout_error(fsp
);
1531 fc_fcp_unlock_pkt(fsp
);
1533 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding REC */
1537 * Time out error routine:
1538 * abort's the I/O close the exchange and
1539 * send completion notification to scsi layer
1541 static void fc_timeout_error(struct fc_fcp_pkt
*fsp
)
1543 fsp
->status_code
= FC_CMD_TIME_OUT
;
1544 fsp
->cdb_status
= 0;
1547 * if this fails then we let the scsi command timer fire and
1550 fc_fcp_send_abort(fsp
);
1554 * Sequence retransmission request.
1555 * This is called after receiving status but insufficient data, or
1556 * when expecting status but the request has timed out.
1558 static void fc_fcp_srr(struct fc_fcp_pkt
*fsp
, enum fc_rctl r_ctl
, u32 offset
)
1560 struct fc_lport
*lp
= fsp
->lp
;
1561 struct fc_rport
*rport
;
1562 struct fc_rport_libfc_priv
*rp
;
1563 struct fc_exch
*ep
= fc_seq_exch(fsp
->seq_ptr
);
1565 struct fcp_srr
*srr
;
1566 struct fc_frame
*fp
;
1570 rp
= rport
->dd_data
;
1571 cdb_op
= fsp
->cdb_cmd
.fc_cdb
[0];
1573 if (!(rp
->flags
& FC_RP_FLAGS_RETRY
) || rp
->rp_state
!= RPORT_ST_READY
)
1574 goto retry
; /* shouldn't happen */
1575 fp
= fc_frame_alloc(lp
, sizeof(*srr
));
1579 srr
= fc_frame_payload_get(fp
, sizeof(*srr
));
1580 memset(srr
, 0, sizeof(*srr
));
1581 srr
->srr_op
= ELS_SRR
;
1582 srr
->srr_ox_id
= htons(ep
->oxid
);
1583 srr
->srr_rx_id
= htons(ep
->rxid
);
1584 srr
->srr_r_ctl
= r_ctl
;
1585 srr
->srr_rel_off
= htonl(offset
);
1587 fc_fill_fc_hdr(fp
, FC_RCTL_ELS4_REQ
, rport
->port_id
,
1588 fc_host_port_id(rp
->local_port
->host
), FC_TYPE_FCP
,
1589 FC_FC_FIRST_SEQ
| FC_FC_END_SEQ
| FC_FC_SEQ_INIT
, 0);
1591 seq
= lp
->tt
.exch_seq_send(lp
, fp
, fc_fcp_srr_resp
, NULL
,
1592 fsp
, jiffies_to_msecs(FC_SCSI_REC_TOV
));
1597 fsp
->recov_seq
= seq
;
1598 fsp
->xfer_len
= offset
;
1599 fsp
->xfer_contig_end
= offset
;
1600 fsp
->state
&= ~FC_SRB_RCV_STATUS
;
1601 fc_fcp_pkt_hold(fsp
); /* hold for outstanding SRR */
1604 fc_fcp_retry_cmd(fsp
);
1608 * Handle response from SRR.
1610 static void fc_fcp_srr_resp(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
1612 struct fc_fcp_pkt
*fsp
= arg
;
1613 struct fc_frame_header
*fh
;
1616 fc_fcp_srr_error(fsp
, fp
);
1620 if (fc_fcp_lock_pkt(fsp
))
1623 fh
= fc_frame_header_get(fp
);
1625 * BUG? fc_fcp_srr_error calls exch_done which would release
1626 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1627 * then fc_exch_timeout would be sending an abort. The exch_done
1628 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1629 * an abort response though.
1631 if (fh
->fh_type
== FC_TYPE_BLS
) {
1632 fc_fcp_unlock_pkt(fsp
);
1636 fsp
->recov_seq
= NULL
;
1637 switch (fc_frame_payload_op(fp
)) {
1639 fsp
->recov_retry
= 0;
1640 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1644 fc_timeout_error(fsp
);
1647 fc_fcp_unlock_pkt(fsp
);
1648 fsp
->lp
->tt
.exch_done(seq
);
1651 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding SRR */
1654 static void fc_fcp_srr_error(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
1656 if (fc_fcp_lock_pkt(fsp
))
1658 fsp
->lp
->tt
.exch_done(fsp
->recov_seq
);
1659 fsp
->recov_seq
= NULL
;
1660 switch (PTR_ERR(fp
)) {
1661 case -FC_EX_TIMEOUT
:
1662 if (fsp
->recov_retry
++ < FC_MAX_RECOV_RETRY
)
1665 fc_timeout_error(fsp
);
1667 case -FC_EX_CLOSED
: /* e.g., link failure */
1670 fc_fcp_retry_cmd(fsp
);
1673 fc_fcp_unlock_pkt(fsp
);
1675 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding SRR */
1678 static inline int fc_fcp_lport_queue_ready(struct fc_lport
*lp
)
1681 return (lp
->state
== LPORT_ST_READY
) && lp
->link_up
&& !lp
->qfull
;
1685 * fc_queuecommand - The queuecommand function of the scsi template
1686 * @cmd: struct scsi_cmnd to be executed
1687 * @done: Callback function to be called when cmd is completed
1689 * this is the i/o strategy routine, called by the scsi layer
1690 * this routine is called with holding the host_lock.
1692 int fc_queuecommand(struct scsi_cmnd
*sc_cmd
, void (*done
)(struct scsi_cmnd
*))
1694 struct fc_lport
*lp
;
1695 struct fc_rport
*rport
= starget_to_rport(scsi_target(sc_cmd
->device
));
1696 struct fc_fcp_pkt
*fsp
;
1697 struct fc_rport_libfc_priv
*rp
;
1700 struct fcoe_dev_stats
*stats
;
1702 lp
= shost_priv(sc_cmd
->device
->host
);
1704 rval
= fc_remote_port_chkready(rport
);
1706 sc_cmd
->result
= rval
;
1711 if (!*(struct fc_remote_port
**)rport
->dd_data
) {
1713 * rport is transitioning from blocked/deleted to
1716 sc_cmd
->result
= DID_IMM_RETRY
<< 16;
1721 rp
= rport
->dd_data
;
1723 if (!fc_fcp_lport_queue_ready(lp
)) {
1724 rc
= SCSI_MLQUEUE_HOST_BUSY
;
1728 fsp
= fc_fcp_pkt_alloc(lp
, GFP_ATOMIC
);
1730 rc
= SCSI_MLQUEUE_HOST_BUSY
;
1735 * build the libfc request pkt
1737 fsp
->cmd
= sc_cmd
; /* save the cmd */
1738 fsp
->lp
= lp
; /* save the softc ptr */
1739 fsp
->rport
= rport
; /* set the remote port ptr */
1740 sc_cmd
->scsi_done
= done
;
1743 * set up the transfer length
1745 fsp
->data_len
= scsi_bufflen(sc_cmd
);
1749 * setup the data direction
1751 stats
= fc_lport_get_stats(lp
);
1752 if (sc_cmd
->sc_data_direction
== DMA_FROM_DEVICE
) {
1753 fsp
->req_flags
= FC_SRB_READ
;
1754 stats
->InputRequests
++;
1755 stats
->InputMegabytes
= fsp
->data_len
;
1756 } else if (sc_cmd
->sc_data_direction
== DMA_TO_DEVICE
) {
1757 fsp
->req_flags
= FC_SRB_WRITE
;
1758 stats
->OutputRequests
++;
1759 stats
->OutputMegabytes
= fsp
->data_len
;
1762 stats
->ControlRequests
++;
1765 fsp
->tgt_flags
= rp
->flags
;
1767 init_timer(&fsp
->timer
);
1768 fsp
->timer
.data
= (unsigned long)fsp
;
1771 * send it to the lower layer
1772 * if we get -1 return then put the request in the pending
1775 rval
= fc_fcp_pkt_send(lp
, fsp
);
1777 fsp
->state
= FC_SRB_FREE
;
1778 fc_fcp_pkt_release(fsp
);
1779 rc
= SCSI_MLQUEUE_HOST_BUSY
;
1784 EXPORT_SYMBOL(fc_queuecommand
);
1787 * fc_io_compl() - Handle responses for completed commands
1790 * Translates a error to a Linux SCSI error.
1792 * The fcp packet lock must be held when calling.
1794 static void fc_io_compl(struct fc_fcp_pkt
*fsp
)
1796 struct fc_fcp_internal
*si
;
1797 struct scsi_cmnd
*sc_cmd
;
1798 struct fc_lport
*lp
;
1799 unsigned long flags
;
1801 /* release outstanding ddp context */
1802 fc_fcp_ddp_done(fsp
);
1804 fsp
->state
|= FC_SRB_COMPL
;
1805 if (!(fsp
->state
& FC_SRB_FCP_PROCESSING_TMO
)) {
1806 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1807 del_timer_sync(&fsp
->timer
);
1808 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1812 si
= fc_get_scsi_internal(lp
);
1813 spin_lock_irqsave(lp
->host
->host_lock
, flags
);
1815 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
1820 * if a command timed out while we had to try and throttle IO
1821 * and it is now getting cleaned up, then we are about to
1822 * try again so clear the throttled flag incase we get more
1825 if (si
->throttled
&& fsp
->state
& FC_SRB_NOMEM
)
1831 if (!sc_cmd
->SCp
.ptr
) {
1832 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
1836 CMD_SCSI_STATUS(sc_cmd
) = fsp
->cdb_status
;
1837 switch (fsp
->status_code
) {
1839 if (fsp
->cdb_status
== 0) {
1843 sc_cmd
->result
= DID_OK
<< 16;
1844 if (fsp
->scsi_resid
)
1845 CMD_RESID_LEN(sc_cmd
) = fsp
->scsi_resid
;
1846 } else if (fsp
->cdb_status
== QUEUE_FULL
) {
1847 struct scsi_device
*tmp_sdev
;
1848 struct scsi_device
*sdev
= sc_cmd
->device
;
1850 shost_for_each_device(tmp_sdev
, sdev
->host
) {
1851 if (tmp_sdev
->id
!= sdev
->id
)
1854 if (tmp_sdev
->queue_depth
> 1) {
1855 scsi_track_queue_full(tmp_sdev
,
1860 sc_cmd
->result
= (DID_OK
<< 16) | fsp
->cdb_status
;
1863 * transport level I/O was ok but scsi
1864 * has non zero status
1866 sc_cmd
->result
= (DID_OK
<< 16) | fsp
->cdb_status
;
1870 sc_cmd
->result
= DID_ERROR
<< 16;
1872 case FC_DATA_UNDRUN
:
1873 if ((fsp
->cdb_status
== 0) && !(fsp
->req_flags
& FC_SRB_READ
)) {
1875 * scsi status is good but transport level
1878 sc_cmd
->result
= DID_OK
<< 16;
1881 * scsi got underrun, this is an error
1883 CMD_RESID_LEN(sc_cmd
) = fsp
->scsi_resid
;
1884 sc_cmd
->result
= (DID_ERROR
<< 16) | fsp
->cdb_status
;
1887 case FC_DATA_OVRRUN
:
1889 * overrun is an error
1891 sc_cmd
->result
= (DID_ERROR
<< 16) | fsp
->cdb_status
;
1893 case FC_CMD_ABORTED
:
1894 sc_cmd
->result
= (DID_ERROR
<< 16) | fsp
->io_status
;
1896 case FC_CMD_TIME_OUT
:
1897 sc_cmd
->result
= (DID_BUS_BUSY
<< 16) | fsp
->io_status
;
1900 sc_cmd
->result
= (DID_RESET
<< 16);
1903 sc_cmd
->result
= (DID_NO_CONNECT
<< 16);
1906 sc_cmd
->result
= (DID_ERROR
<< 16);
1910 list_del(&fsp
->list
);
1911 sc_cmd
->SCp
.ptr
= NULL
;
1912 sc_cmd
->scsi_done(sc_cmd
);
1913 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
1915 /* release ref from initial allocation in queue command */
1916 fc_fcp_pkt_release(fsp
);
1920 * fc_fcp_complete() - complete processing of a fcp packet
1923 * This function may sleep if a fsp timer is pending.
1924 * The host lock must not be held by caller.
1926 void fc_fcp_complete(struct fc_fcp_pkt
*fsp
)
1928 if (fc_fcp_lock_pkt(fsp
))
1931 fc_fcp_complete_locked(fsp
);
1932 fc_fcp_unlock_pkt(fsp
);
1934 EXPORT_SYMBOL(fc_fcp_complete
);
1937 * fc_eh_abort() - Abort a command
1938 * @sc_cmd: scsi command to abort
1940 * From scsi host template.
1941 * send ABTS to the target device and wait for the response
1942 * sc_cmd is the pointer to the command to be aborted.
1944 int fc_eh_abort(struct scsi_cmnd
*sc_cmd
)
1946 struct fc_fcp_pkt
*fsp
;
1947 struct fc_lport
*lp
;
1949 unsigned long flags
;
1951 lp
= shost_priv(sc_cmd
->device
->host
);
1952 if (lp
->state
!= LPORT_ST_READY
)
1954 else if (!lp
->link_up
)
1957 spin_lock_irqsave(lp
->host
->host_lock
, flags
);
1958 fsp
= CMD_SP(sc_cmd
);
1960 /* command completed while scsi eh was setting up */
1961 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
1964 /* grab a ref so the fsp and sc_cmd cannot be relased from under us */
1965 fc_fcp_pkt_hold(fsp
);
1966 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
1968 if (fc_fcp_lock_pkt(fsp
)) {
1969 /* completed while we were waiting for timer to be deleted */
1974 rc
= fc_fcp_pkt_abort(lp
, fsp
);
1975 fc_fcp_unlock_pkt(fsp
);
1978 fc_fcp_pkt_release(fsp
);
1981 EXPORT_SYMBOL(fc_eh_abort
);
1984 * fc_eh_device_reset() Reset a single LUN
1985 * @sc_cmd: scsi command
1987 * Set from scsi host template to send tm cmd to the target and wait for the
1990 int fc_eh_device_reset(struct scsi_cmnd
*sc_cmd
)
1992 struct fc_lport
*lp
;
1993 struct fc_fcp_pkt
*fsp
;
1994 struct fc_rport
*rport
= starget_to_rport(scsi_target(sc_cmd
->device
));
1996 struct fc_rport_libfc_priv
*rp
;
1999 rval
= fc_remote_port_chkready(rport
);
2003 rp
= rport
->dd_data
;
2004 lp
= shost_priv(sc_cmd
->device
->host
);
2006 if (lp
->state
!= LPORT_ST_READY
)
2009 FC_SCSI_DBG(lp
, "Resetting rport (%6x)\n", rport
->port_id
);
2011 fsp
= fc_fcp_pkt_alloc(lp
, GFP_NOIO
);
2013 printk(KERN_WARNING
"libfc: could not allocate scsi_pkt\n");
2014 sc_cmd
->result
= DID_NO_CONNECT
<< 16;
2019 * Build the libfc request pkt. Do not set the scsi cmnd, because
2020 * the sc passed in is not setup for execution like when sent
2021 * through the queuecommand callout.
2023 fsp
->lp
= lp
; /* save the softc ptr */
2024 fsp
->rport
= rport
; /* set the remote port ptr */
2027 * flush outstanding commands
2029 rc
= fc_lun_reset(lp
, fsp
, scmd_id(sc_cmd
), sc_cmd
->device
->lun
);
2030 fsp
->state
= FC_SRB_FREE
;
2031 fc_fcp_pkt_release(fsp
);
2036 EXPORT_SYMBOL(fc_eh_device_reset
);
2039 * fc_eh_host_reset() - The reset function will reset the ports on the host.
2040 * @sc_cmd: scsi command
2042 int fc_eh_host_reset(struct scsi_cmnd
*sc_cmd
)
2044 struct Scsi_Host
*shost
= sc_cmd
->device
->host
;
2045 struct fc_lport
*lp
= shost_priv(shost
);
2046 unsigned long wait_tmo
;
2048 FC_SCSI_DBG(lp
, "Resetting host\n");
2050 lp
->tt
.lport_reset(lp
);
2051 wait_tmo
= jiffies
+ FC_HOST_RESET_TIMEOUT
;
2052 while (!fc_fcp_lport_queue_ready(lp
) && time_before(jiffies
, wait_tmo
))
2055 if (fc_fcp_lport_queue_ready(lp
)) {
2056 shost_printk(KERN_INFO
, shost
, "libfc: Host reset succeeded "
2057 "on port (%6x)\n", fc_host_port_id(lp
->host
));
2060 shost_printk(KERN_INFO
, shost
, "libfc: Host reset failed, "
2061 "port (%6x) is not ready.\n",
2062 fc_host_port_id(lp
->host
));
2066 EXPORT_SYMBOL(fc_eh_host_reset
);
2069 * fc_slave_alloc() - configure queue depth
2070 * @sdev: scsi device
2072 * Configures queue depth based on host's cmd_per_len. If not set
2073 * then we use the libfc default.
2075 int fc_slave_alloc(struct scsi_device
*sdev
)
2077 struct fc_rport
*rport
= starget_to_rport(scsi_target(sdev
));
2080 if (!rport
|| fc_remote_port_chkready(rport
))
2083 if (sdev
->tagged_supported
) {
2084 if (sdev
->host
->hostt
->cmd_per_lun
)
2085 queue_depth
= sdev
->host
->hostt
->cmd_per_lun
;
2087 queue_depth
= FC_FCP_DFLT_QUEUE_DEPTH
;
2088 scsi_activate_tcq(sdev
, queue_depth
);
2092 EXPORT_SYMBOL(fc_slave_alloc
);
2094 int fc_change_queue_depth(struct scsi_device
*sdev
, int qdepth
)
2096 scsi_adjust_queue_depth(sdev
, scsi_get_tag_type(sdev
), qdepth
);
2097 return sdev
->queue_depth
;
2099 EXPORT_SYMBOL(fc_change_queue_depth
);
2101 int fc_change_queue_type(struct scsi_device
*sdev
, int tag_type
)
2103 if (sdev
->tagged_supported
) {
2104 scsi_set_tag_type(sdev
, tag_type
);
2106 scsi_activate_tcq(sdev
, sdev
->queue_depth
);
2108 scsi_deactivate_tcq(sdev
, sdev
->queue_depth
);
2114 EXPORT_SYMBOL(fc_change_queue_type
);
2116 void fc_fcp_destroy(struct fc_lport
*lp
)
2118 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lp
);
2120 if (!list_empty(&si
->scsi_pkt_queue
))
2121 printk(KERN_ERR
"libfc: Leaked SCSI packets when destroying "
2122 "port (%6x)\n", fc_host_port_id(lp
->host
));
2124 mempool_destroy(si
->scsi_pkt_pool
);
2126 lp
->scsi_priv
= NULL
;
2128 EXPORT_SYMBOL(fc_fcp_destroy
);
2130 int fc_fcp_init(struct fc_lport
*lp
)
2133 struct fc_fcp_internal
*si
;
2135 if (!lp
->tt
.fcp_cmd_send
)
2136 lp
->tt
.fcp_cmd_send
= fc_fcp_cmd_send
;
2138 if (!lp
->tt
.fcp_cleanup
)
2139 lp
->tt
.fcp_cleanup
= fc_fcp_cleanup
;
2141 if (!lp
->tt
.fcp_abort_io
)
2142 lp
->tt
.fcp_abort_io
= fc_fcp_abort_io
;
2144 si
= kzalloc(sizeof(struct fc_fcp_internal
), GFP_KERNEL
);
2148 INIT_LIST_HEAD(&si
->scsi_pkt_queue
);
2150 si
->scsi_pkt_pool
= mempool_create_slab_pool(2, scsi_pkt_cachep
);
2151 if (!si
->scsi_pkt_pool
) {
2161 EXPORT_SYMBOL(fc_fcp_init
);
2163 static int __init
libfc_init(void)
2167 scsi_pkt_cachep
= kmem_cache_create("libfc_fcp_pkt",
2168 sizeof(struct fc_fcp_pkt
),
2169 0, SLAB_HWCACHE_ALIGN
, NULL
);
2170 if (scsi_pkt_cachep
== NULL
) {
2171 printk(KERN_ERR
"libfc: Unable to allocate SRB cache, "
2172 "module load failed!");
2176 rc
= fc_setup_exch_mgr();
2178 goto destroy_pkt_cache
;
2180 rc
= fc_setup_rport();
2186 fc_destroy_exch_mgr();
2188 kmem_cache_destroy(scsi_pkt_cachep
);
2192 static void __exit
libfc_exit(void)
2194 kmem_cache_destroy(scsi_pkt_cachep
);
2195 fc_destroy_exch_mgr();
2199 module_init(libfc_init
);
2200 module_exit(libfc_exit
);