close_port, kpacket_gen kmalloc oom, formard.c wake_sender/skb receive oom handling...
[cor_2_6_31.git] / drivers / usb / storage / onetouch.c
blob380233bd6a393c3522655922297849fa346f3f7a
1 /*
2 * Support for the Maxtor OneTouch USB hard drive's button
4 * Current development and maintenance by:
5 * Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu>
7 * Initial work by:
8 * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
10 * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
31 #include <linux/kernel.h>
32 #include <linux/input.h>
33 #include <linux/init.h>
34 #include <linux/slab.h>
35 #include <linux/module.h>
36 #include <linux/usb/input.h>
37 #include "usb.h"
38 #include "debug.h"
40 MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver");
41 MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>");
42 MODULE_LICENSE("GPL");
44 #define ONETOUCH_PKT_LEN 0x02
45 #define ONETOUCH_BUTTON KEY_PROG1
47 static int onetouch_connect_input(struct us_data *ss);
48 static void onetouch_release_input(void *onetouch_);
50 struct usb_onetouch {
51 char name[128];
52 char phys[64];
53 struct input_dev *dev; /* input device interface */
54 struct usb_device *udev; /* usb device */
56 struct urb *irq; /* urb for interrupt in report */
57 unsigned char *data; /* input data */
58 dma_addr_t data_dma;
59 unsigned int is_open:1;
64 * The table of devices
66 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
67 vendorName, productName, useProtocol, useTransport, \
68 initFunction, flags) \
69 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
70 .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
72 struct usb_device_id onetouch_usb_ids[] = {
73 # include "unusual_onetouch.h"
74 { } /* Terminating entry */
76 MODULE_DEVICE_TABLE(usb, onetouch_usb_ids);
78 #undef UNUSUAL_DEV
81 * The flags table
83 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
84 vendor_name, product_name, use_protocol, use_transport, \
85 init_function, Flags) \
86 { \
87 .vendorName = vendor_name, \
88 .productName = product_name, \
89 .useProtocol = use_protocol, \
90 .useTransport = use_transport, \
91 .initFunction = init_function, \
94 static struct us_unusual_dev onetouch_unusual_dev_list[] = {
95 # include "unusual_onetouch.h"
96 { } /* Terminating entry */
99 #undef UNUSUAL_DEV
102 static void usb_onetouch_irq(struct urb *urb)
104 struct usb_onetouch *onetouch = urb->context;
105 signed char *data = onetouch->data;
106 struct input_dev *dev = onetouch->dev;
107 int status = urb->status;
108 int retval;
110 switch (status) {
111 case 0: /* success */
112 break;
113 case -ECONNRESET: /* unlink */
114 case -ENOENT:
115 case -ESHUTDOWN:
116 return;
117 /* -EPIPE: should clear the halt */
118 default: /* error */
119 goto resubmit;
122 input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02);
123 input_sync(dev);
125 resubmit:
126 retval = usb_submit_urb (urb, GFP_ATOMIC);
127 if (retval)
128 dev_err(&dev->dev, "can't resubmit intr, %s-%s/input0, "
129 "retval %d\n", onetouch->udev->bus->bus_name,
130 onetouch->udev->devpath, retval);
133 static int usb_onetouch_open(struct input_dev *dev)
135 struct usb_onetouch *onetouch = input_get_drvdata(dev);
137 onetouch->is_open = 1;
138 onetouch->irq->dev = onetouch->udev;
139 if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
140 dev_err(&dev->dev, "usb_submit_urb failed\n");
141 return -EIO;
144 return 0;
147 static void usb_onetouch_close(struct input_dev *dev)
149 struct usb_onetouch *onetouch = input_get_drvdata(dev);
151 usb_kill_urb(onetouch->irq);
152 onetouch->is_open = 0;
155 #ifdef CONFIG_PM
156 static void usb_onetouch_pm_hook(struct us_data *us, int action)
158 struct usb_onetouch *onetouch = (struct usb_onetouch *) us->extra;
160 if (onetouch->is_open) {
161 switch (action) {
162 case US_SUSPEND:
163 usb_kill_urb(onetouch->irq);
164 break;
165 case US_RESUME:
166 if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0)
167 dev_err(&onetouch->irq->dev->dev,
168 "usb_submit_urb failed\n");
169 break;
170 default:
171 break;
175 #endif /* CONFIG_PM */
177 static int onetouch_connect_input(struct us_data *ss)
179 struct usb_device *udev = ss->pusb_dev;
180 struct usb_host_interface *interface;
181 struct usb_endpoint_descriptor *endpoint;
182 struct usb_onetouch *onetouch;
183 struct input_dev *input_dev;
184 int pipe, maxp;
185 int error = -ENOMEM;
187 interface = ss->pusb_intf->cur_altsetting;
189 if (interface->desc.bNumEndpoints != 3)
190 return -ENODEV;
192 endpoint = &interface->endpoint[2].desc;
193 if (!usb_endpoint_is_int_in(endpoint))
194 return -ENODEV;
196 pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
197 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
199 onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL);
200 input_dev = input_allocate_device();
201 if (!onetouch || !input_dev)
202 goto fail1;
204 onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN,
205 GFP_ATOMIC, &onetouch->data_dma);
206 if (!onetouch->data)
207 goto fail1;
209 onetouch->irq = usb_alloc_urb(0, GFP_KERNEL);
210 if (!onetouch->irq)
211 goto fail2;
213 onetouch->udev = udev;
214 onetouch->dev = input_dev;
216 if (udev->manufacturer)
217 strlcpy(onetouch->name, udev->manufacturer,
218 sizeof(onetouch->name));
219 if (udev->product) {
220 if (udev->manufacturer)
221 strlcat(onetouch->name, " ", sizeof(onetouch->name));
222 strlcat(onetouch->name, udev->product, sizeof(onetouch->name));
225 if (!strlen(onetouch->name))
226 snprintf(onetouch->name, sizeof(onetouch->name),
227 "Maxtor Onetouch %04x:%04x",
228 le16_to_cpu(udev->descriptor.idVendor),
229 le16_to_cpu(udev->descriptor.idProduct));
231 usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys));
232 strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys));
234 input_dev->name = onetouch->name;
235 input_dev->phys = onetouch->phys;
236 usb_to_input_id(udev, &input_dev->id);
237 input_dev->dev.parent = &udev->dev;
239 set_bit(EV_KEY, input_dev->evbit);
240 set_bit(ONETOUCH_BUTTON, input_dev->keybit);
241 clear_bit(0, input_dev->keybit);
243 input_set_drvdata(input_dev, onetouch);
245 input_dev->open = usb_onetouch_open;
246 input_dev->close = usb_onetouch_close;
248 usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data,
249 (maxp > 8 ? 8 : maxp),
250 usb_onetouch_irq, onetouch, endpoint->bInterval);
251 onetouch->irq->transfer_dma = onetouch->data_dma;
252 onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
254 ss->extra_destructor = onetouch_release_input;
255 ss->extra = onetouch;
256 #ifdef CONFIG_PM
257 ss->suspend_resume_hook = usb_onetouch_pm_hook;
258 #endif
260 error = input_register_device(onetouch->dev);
261 if (error)
262 goto fail3;
264 return 0;
266 fail3: usb_free_urb(onetouch->irq);
267 fail2: usb_buffer_free(udev, ONETOUCH_PKT_LEN,
268 onetouch->data, onetouch->data_dma);
269 fail1: kfree(onetouch);
270 input_free_device(input_dev);
271 return error;
274 static void onetouch_release_input(void *onetouch_)
276 struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_;
278 if (onetouch) {
279 usb_kill_urb(onetouch->irq);
280 input_unregister_device(onetouch->dev);
281 usb_free_urb(onetouch->irq);
282 usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN,
283 onetouch->data, onetouch->data_dma);
287 static int onetouch_probe(struct usb_interface *intf,
288 const struct usb_device_id *id)
290 struct us_data *us;
291 int result;
293 result = usb_stor_probe1(&us, intf, id,
294 (id - onetouch_usb_ids) + onetouch_unusual_dev_list);
295 if (result)
296 return result;
298 /* Use default transport and protocol */
300 result = usb_stor_probe2(us);
301 return result;
304 static struct usb_driver onetouch_driver = {
305 .name = "ums-onetouch",
306 .probe = onetouch_probe,
307 .disconnect = usb_stor_disconnect,
308 .suspend = usb_stor_suspend,
309 .resume = usb_stor_resume,
310 .reset_resume = usb_stor_reset_resume,
311 .pre_reset = usb_stor_pre_reset,
312 .post_reset = usb_stor_post_reset,
313 .id_table = onetouch_usb_ids,
314 .soft_unbind = 1,
317 static int __init onetouch_init(void)
319 return usb_register(&onetouch_driver);
322 static void __exit onetouch_exit(void)
324 usb_deregister(&onetouch_driver);
327 module_init(onetouch_init);
328 module_exit(onetouch_exit);